Professional Documents
Culture Documents
bear large loads without deformation. They are considered the strongest shape
because a triangular structure subject to strong forces only collapses due to material
fatigue and not to geometric distortion. It is easier to understand why triangles are so
strong when compared to a square or rectangular structure.
Consider an equilateral triangle, which is the same as to say that all three sides are
of the same length. Each side is connected to the others by a pin that allows rotation
but prevents them to separate. If a load is applied to any vertex or side, is is evenly
distributed by all sides and, because the sides cannot change length, the shape
remains stable. When the same happens to another shape, the forces are applied to
the connectors and can make the sides pivot, collapsing the shape. As an example,
take an equilateral triangle set on its base and apply a load or force to the top vertex.
If this force is vertical, it is distributed by both sides and transmitted to the base. But
if this force has a torque or is directed to any other direction, one of the sides is
forced to rotate. It can only rotate if the other side increases its length and thus
remains in the same position. With an equilateral square in the same conditions, a
vertical force does not have any effect, but a torque or imbalanced force causes one
side to rotate and because it is not constrained by the fixed length and the angle
variation in relation to the base is easily compensated by other segments, the shape
can tilt and collapse. Because of these geometrical properties, triangles are used to
build strong and indeformable structures, with material strength limits, such as
bridges and trusses. A truss is a simple set of triangles sharing sides, and
connections. The properties of each triangle are kept and form an even stronger
structure.
Overall, a triangle is the simplest geometrc figure that will not change shape when
the lengths of the sides are fixed. In comparison, both the angles and the lengths of
a four-sided figure must be fixed for it to retain its shape.
Regarding point one, this diagram shows how a triangulated structure withstands
forces.
(where m is the total number of members, j is the total number of joints and r is the
number of reactions, e.g. r=3 in a 2-D structure.)
Demonstration:
In order to test how strong a triangular structure is, we are going to do an
experiment.
First of all, we need to accordion fold an A4 sheet of paper.
Use two books as supporters and put the paper on top of them.
Now, we put a load on it.
Surprisingly, the A4 paper is able to support two books which are far heavier than its
own weight.
Some buildings are built with more than the minimum number of truss members
required. Therefore, they do not not collapse easily even if some members
are damaged.