You are on page 1of 8

No NE orm

w W T
in d F
a

Av si ap
n

ai ze s!
The Original

la
b s
le
Tested
Trusted
Most Productive

MultiTAP is the ONE!


by

The industrys first general purpose, high performance tap.


MultiTAP will cut a wide range of materials including carbon steel, steel
alloys, stainless steel, aluminum, cast iron, copper, brass, and bronze.
MultiTAP is also uniquely designed to produce threads within both
2B and 3B classes of fit, eliminating the guesswork required
when calculating H-limits.

Emuge is widely known for manufacturing high performance


application specific taps, thread mills and end mills for high
production output. However, now Emuge has designed MultiTAP
to offer job shops and other manufacturers an affordable, yet
high performance tapping solution.

MultiTAP is the ideal tap for a job shop or a manufacturer who


works with short- and medium-run threading applications
across a wide spectrum of
materials. It will significantly
improve thread quality and
boost output while reducing
production costs, because
one high performance
MultiTAP will handle most
common materials and
applications. MultiTAP
eliminates the need to
stock numerous types of
taps in the tool crib.

Made in Germany
by Emuge

2
What MultiTAP users are saying...
TM

Since Emuge introduced MultiTAP, the industrys first high-performance


multi-purpose tap, imitators are trying to follow. But MultiTAP users
know what works best. Multitap is the ONE.

MultiTAP is the most After weeks of intensive


productive tool we testing, MultiTAP scored
have. After 700 holes highest in performance
in A572 plate grade 50, and tool life. It is the
the tap looked new. truest general purpose
An investment under tap available.
$0.045 per hole.

We tested MultiTAP and had great results.


With less downtime and tap replacement,
it offers significant cost savings and
handles a wider range of applications.

The MultiTAP has


far outperformed
other form taps
that prematurely
failed on us.

MultiTAP is guaranteed!
TM

Put it to the test yourself:


If MultiTAP doesnt outperform your
current taps in a range of common
With MultiTAP I dont worry about materials, Emuge will refund your
calculating H limits. One tap handles 2B money.
and 3B classes of fit. Weve also reduced
the number of taps stocked in our crib. See MultiTAP in action online at:
www.emuge.com/multitap

3
Spiral Point and Spiral Flute Taps

MultiTAP is the result of collective years of Emuges


TM
technical characteristics
extensive tapping expertise and application research. Tool type straight flute, spiral flute,
It features a completely new, innovative geometric spiral point right hand
design and a special base material and surface Surface treatment Ne2 Ne2
treatment, allowing it to handle numerous materials Tool material HSS-E HSS-E
and applications. Threads in chamfer 4-5 2-3
Ideal thread depth up to 2.5D up to 2.5D
n MultiTAP is constructed of a proprietary grade of high Ideal material hardness up to 35Rc up tp 35Rc
speed steel (HSS-E), nitrided with an Ne2 surface
Class of fit 2B / 3B 2B / 3B
treatment
Hole type
n All taps are made with Emuges trademark long
shanks DIN length for extra reach. UNC and UNF taps
are DIN length ANSI shanks, metric taps are DIN length
DIN shanks

n Full range of tap sizes for UNC or UNF threads, from a


#4-40 to 1"-12 for inch sizes, to metric sizes from
MultiTAP MATERIAL SAMPLING
M 4x0.7 to M 16x2.0 Main Group Sub-Group Example
Aluminum Casting 356T6, 380, 390,
6061, 7075
Cast Iron Grey iron G10, GG25, GG30
High strength Nodular, Ductile
Steel Carbon, all grades 1010, 1018, 1045
Free cutting 12L14, 1215
Constructual A36, T1 plate
Alloyed 4140, 4130, 8620
Cast, or Forged
Tool / Mold / Die D2, S7, P20, H13
Stainless Steel Austenitic 303, 304, 316
Ferritic 405, 409, 430
Martensitic 416, 420, 440
Copper Zinc alloy Brass
One MultiTAP cuts a wide range of materials.
Tin alloy Bronze

4
MultiTAP SPIRAL POINT DIN LENGTH
Size Order Number Size Order Number
#4-40 UNC BU4973005003 5/16-24 UNF BU4973005044
#5-40 UNC BU4973005004 3/8-24 UNF BU4973005045
#6-32 UNC BU4973005005 7/16-20 UNF CU4973005046

NEW
#8-32 UNC BU4973005006 1/2-20 UNF CU4973005047
#10-24 UNC BU4973005007 9/16-18 UNF CU4973005048
#12-24 UNC BU4973005008 5/8-18 UNF CU4973005049
1/4-20 UNC BU4973005009 3/4-16 UNF CU4973005050
5/16-18 UNC BU4973005010 7/8-14 UNF CU4973005051

NEW
3/8-16 UNC BU4973005011 1"-12 UNF CU4973005052
7/16-14 UNC CU4973005012 SPIRAL POINT METRIC / COARSE
1/2-13 UNC CU4973005013 M 4X0.7 B15773000040
9/16-12 UNC CU4973005014 M 5X0.8 B15773000050
5/8-11 UNC CU4973005015 M 6X1.0 B15773000060
3/4-10 UNC CU4973005016 M 8X1.25 B15773000080
7/8-9 UNC CU4973005017 M 10X1.5 B15773000100
1"-8 UNC CU4973005018 M 12X1.75 C15773000112
#4-48 UNF BU4973005037 M 16X2.0 C15773000116
NEW

#6-40 UNF BU4973005039


#10-32 UNF BU4973005041 Inch taps handle 2B and 3B classes of fit
#12-28 UNF BU4973005042 Metric taps handle 6H class of fit
1/4-28 UNF BU4973005043

MultiTAP SPIRAL FLUTE DIN LENGTH


Size Order Number Size Order Number
#4-40 UNC BU5332005003 5/16-24 UNF BU5332005044
#5-40 UNC BU5332005004 3/8-24 UNF BU5332005045
#6-32 UNC BU5332005005 7/16-20 UNF CU5332005046
NEW

#8-32 UNC BU5332005006 1/2-20 UNF CU5332005047


#10-24 UNC BU5332005007 9/16-18 UNF CU5332005048
#12-24 UNC BU5332005008 5/8-18 UNF CU5332005049
1/4-20 UNC BU5332005009 3/4-16 UNF CU5332005050
5/16-18 UNC BU5332005010 7/8-14 UNF CU5332005051

NEW
3/8-16 UNC BU5332005011 1"-12 UNF CU5332005052
7/16-14 UNC CU5332005012 SPIRAL FLUTE METRIC / COARSE
1/2-13 UNC CU5332005013 M 4X0.7 B49332000040
9/16-12 UNC CU5332005014 M 5X0.8 B49332000050
5/8-11 UNC CU5332005015 M 6X1.0 B49332000060
3/4-10 UNC CU5332005016 M 8X1.25 B49332000080
7/8-9 UNC CU5332005017 M 10X1.5 B49332000100
1"-8 UNC CU5332005018 M 12X1.75 C49332000112
#4-48 UNF BU5332005037 M 16X2.0 C49332000116
NEW

#6-40 UNF BU5332005039


#10-32 UNF BU5332005041 Inch taps handle 2B and 3B classes of fit
#12-28 UNF BU5332005042 Metric taps handle 6H class of fit
1/4-28 UNF BU5332005043

5
-Form Roll Form Taps

Now the industrys first general purpose, high


performance tap is available in a full line of form Dramatic PerFORMance Increases
taps featuring a new innovative geometric design,
40
special base material and TiN coating. This allows EMUGE MultiTAP-Form
35
one MultiTAP-Form to handle numerous materials and Leading Roll Form Tap Brand
30
applications at unsurpassed performance levels.

Torque (N m)
25
n Constructed of a proprietary grade of high speed steel 20
(HSS-E) and TiN coated for exceptionally long life and 15
versatility
10 -Form
n Short chamfer lead of 1.5-2 pitch, ideal for bottom tapping 5
0
n Lubrication grooves allow coolant flow-to-form action, ideal 0 200 400 600 800 1000 1200 1400 1600
for holes with long thread length Number of Holes

n Form both 2B and 3B threads with the same tap,


eliminating the guesswork of calculating H-limits In lab tests, MultiTAP far outperformed a leading
brand forming tap.
n All taps made with Emuges trademark long shanks-DIN
length for extra reach. UNC and UNF taps are DIN length- Test Data:
ANSI shanks, metric taps are DIN length-DIN shanks
Material AISI 1045
Holder PGR25-KSN3-SSY-DDU4
Making threads without chips has many Coolant 10% water soluble
advantages, including: Machine vertical machining center
Thread M10
n Excellent thread surface quality
Depth 20mm (2xD)
n No risk of poor threads due to axial miscutting Coating TiN
Drill Diameter 9.35mm
n Increased static and dynamic strength of thread
Test results:
n Elevated tapping speeds are possible
A Leading Roll Form Tap Brand
n Breakage at 265 holes

EMUGE MultiTAP-Form
n Torque too high at 1639 holes

6
MultiTAP-Form MATERIAL SAMPLING*
Main Group Sub-Group Example
Aluminum Casting 356T6, 380, 390,
6061, 7075
Steel Carbon, all grades 1010, 1018, 1045
Free cutting 12L14, 1215
Constructual A36, T1 plate
Alloyed 4140, 4130, 8620
Cast, or Forged
Tool / Mold / Die D2, S7, P20, H13
Stainless Steel Austenitic 303, 304, 316
Ferritic 405, 409, 430
Martensitic 416, 420, 440
MultiTAP-Form displaces the workpiece material, increasing Copper Zinc alloy Brass
thread strength and quality. Tin alloy Bronze
*Also ideal in a wide range of plastics and composites

MultiTAP-Form DIN LENGTH


Recommended Recommended
Size Tap Drill Size Order No. Size Tap Drill Size Order No.
#4-40 UNC .1004 BU5914105003 5/16-24 UNF .2950 BU5914105044
#5-40 UNC .1142 BU5914105004 3/8-24 UNF .3543 BU5914105045
#6-32 UNC .1240 BU5914105005 METRIC
#8-32 UNC .1496 BU5914105006 M 2x0.4 1.85 B59914000020
#10-24 UNC .1713 BU5914105007 M 3x0.5 2.8 B59914000030
1/4-20 UNC .2264 BU5914105009 M 4x0.7 3.7 B59914000040
5/16-18 UNC .2874 BU5914105010 M 5x0.8 4.65 B59914000050
3/8-16 UNC .3465 BU5914105011 M 6x1.0 5.6 B59914000060
#6-40 UNF .1260 BU5914105039 M 8x1.25 7.4 B59914000080
#8-36 UNF .1516 BU5914105040 M 10x1.5 9.3 B59914000100
#10-32 UNF .1752 BU5914105041 Inch taps handle 2B and 3B classes of fit
1/4-28 UNF .2344 BU5914105043 Metric taps handle 6H class of fit

7
HIGH PERFORMANCE TOOLS
) SFM
MultiTAP SFM Specifications

MultiTAP-
MultiTAP
Hardness Range

Form
Material Group Material Example
HRC BHN N/mm2
1 Steel Materials
1.1 Cold-extrusion steels,
120 400 1008 / 1010 25 - 60 35 - 85
Magnetic soft iron
Free cutting steels, 1008 / 1010 / 12L14 /
1.2
180 600 A36 25 - 60 35 - 85
General construction steels 11L17 / 1149 / 12L15
Free cutting steels, 1018 / 1060 / 4130 /
Construction steels, 25 250 850 4140 / 41L30 15 - 40 35 - 75
1.3
Alloyed steels, Steel castings 41L45 / 86L20 /
86L40 / 1045
Emuge Corp. has been the product Crome alloy steel, Cold work 5115 / A29 / A519 /
steels, 36 320 1100 J404 / 4130 / 8030 10 - 35 15 - 40
1.4
technology and performance leader in Heat-treatable steels, 4140 / 4330 / Nitrally
Nitriding steels 125, 135, 230
their field for nearly 100 years. Emuge Corrosion/ acid-proof steels, 303 / 304 / 316 /
1.10 25 250 850 10 - 30 15 - 45
manufactures an extensive line of taps, Heat-resistant steels 316L / 416 / 420
1.11 Corrosion/ acid-proof steels, 410 / 420 / Cf8m / 17-
35 320 1100 10 - 25 15 - 45
thread mills, end mills, toolholders, clamping Heat-resistant steels 4PH
2 Cast Materials
devices and other rotary cutting tools, over 2.1 Cast iron 280 ASTM A48 / SAE 35 - 65 N/A
100,000 items sold through distributors J431c / 1800
2.2 Cast iron with nodular 1000 ASTM A48 class 20, 15 - 50 N/A
worldwide. Emuge also offers end-user graphite 30, 35 , 40
Cast iron with vermicular
technical support through a network of 2.3
graphite
280 15 - 50 N/A
2.4 Malleable cast iron 700 ASTM A47 grade
in-the-field engineers and in-house product 32510, 35018
35 - 65 N/A

specialists, all with extensive tooling and 3 Copper, Copper Alloys, Bronze, Brass
3.1 Pure Copper and low alloyed 150 500 15 - 40 35 - 100
application experience. copper
3.2 Copper-zinc alloys (brass, 35 - 80 35 - 100
long chipping)
3.3 Copper-zinc alloys (brass, 35 - 80 35 - 100
short chipping)
Copper-aluminum alloys
(alubronze, long chipping) 10 - 35 20 - 50
3.4
Copper-tin alloys (bronze,
long chipping)
3.5 Copper-tin alloys (bronze, 15 - 45 35 - 85
short chipping)
5 Aluminum Alloys
5.1 Aluminum wrought alloys 2014 / 2117 / 5050 / 35 - 65 35 - 100
6061 / 7004
5.2 Aluminum cast alloys 5% 201 / 213 / 295 / 35 - 65 35 - 100
Si 435.3 / 511.0
5.3 Aluminum cast alloys 5% < 319 / 333 / 343 / 356 35 - 65 35 - 100
Si 12% / 369 / 380
5.4 Aluminum cast alloys 12% < 390 / 393 / 413 20 - 50 35 - 85
Si 1

Scan for more 1800 Century Drive n West Boylston, MA 01583


information on
MultiTAP. 800-323-3013 n fax: 800-393-1302
www.emuge.com

A Full Line of High


Performance Cutting Tools
2014 Emuge Corp. 7.5M-3/14MA Printed in USA

You might also like