Professional Documents
Culture Documents
Alarms
al
ala
alt
alk
Logs
CVs
cvcu
cvls
cvmk <cv name>
cvset <cv name>
cvms <cv name>
cv help
Cabinet Info
cab
cabx
cabl
cabd
cabxlsd
Board Status
lt plug
lst plug
To Block a board
bl <proxy number of board>
To Deblock a board
deb <proxy number of board>
IP Address
ifconfig
Ping
Unable to moshell
pglist e (rbs)
lhsh 001200 pglist e (rnc)
pgkill <handle>
RBS INFO
cabx
lhsh 000800 vols
lhsh 000900 vols
cabd
get 0
lt radio
get radio num
The number of radio links should not be 0 if calls are active or being attempted on the
rbs.
From RNC
lt utrancell
get utran erdl (MaxTxPowerDl)
VSWR
or
lt sector
lc sector
lcc sector
lst sector
lt pcu
lcc pcu
st
lt power
lcc power
st
get psdevice
Volumes Full
RBS Capacity
lt commcontext
get <proxy>
number of commcontexts = number of channel elements used
lt UplinkBaseBandPool
pget <proxy>
gives latest rop for rax capacity , number of calls and type and failures
If you suspect H/W capacity issue call NSS to activate traces and investigate
Spreading Factors
UL DL
Broadcast sf256
Paging sf128
Measuring Aal2 Congestion
lt aal2ap
pget <proxy>
Aal2Sp=1,Aal2Ap=1 pmExisOrigConns 0
Aal2Sp=1,Aal2Ap=1 pmExisTermConns 16
Aal2Sp=1,Aal2Ap=1 pmExisTransConns 0
Aal2Sp=1,Aal2Ap=1 pmSuccInConnsRemote 193052
Aal2Sp=1,Aal2Ap=1 pmSuccOutConnsRemote 0
Aal2Sp=1,Aal2Ap=1 pmUnRecMessages 0
Aal2Sp=1,Aal2Ap=1 pmUnRecParams 0
Aal2Sp=1,Aal2Ap=1 pmUnSuccInConnsLocal 0
Aal2Sp=1,Aal2Ap=1 pmUnSuccInConnsRemote 0
Aal2Sp=1,Aal2Ap=1 pmUnSuccOutConnsLocal 0
Aal2Sp=1,Aal2Ap=1 pmUnSuccOutConnsRemote 0
Check pmUnSuccInConnsRemote
Number of unsuccessful establishment of incoming connections on this AP caused by
reject from beyond this node
RBS Synching up
Also check the ETM1 in the RXI for the above ,also check if any other RBS on this
ETM1 are experiencing the same problem.
eg
lhsh 001600 te log read
RNC INFO
To block a sector
bl <proxy of sector to be blocked>
deb <proxy of sector to be deblocked>
CV's
cvcu
cvls
cvms egralyn correct maxtxpowerdl
cv cu
cv ls
cv help
str
str1
str2
st utrancell dis|\(lo)
To find ip address
ifconfig
Restart logs
Lgo to print out
llog
llog -l
llog -l 3
all llog
Board Info
cabx
cabl
cabxlsd
Signal Links in MGW
lt mtp3b
lst mtp3b
get <proxy>
acl <proxy>
acc <proxy>
cab : (cabinet )
lgs :display the system log for the whole period stored in system
log (can be several months)
lgasmi 30 :display the last 30 days of the alarm and system logs, merge
them and show them
in reverse chronological order.
lgaevs 5h :display the last 5 hours of the
alarm/event/availability/system logs.
lgac 30m :display the last 30 minutes of the alarm log and print the
output into a csv file.
bl : ( Locked cell )
get rbslocalcell:- : cell id / If the site dont comes up after intergration check
the below.
ueregprint sum : To view total users ( i.e ueregprint sum $ 380 UEs
registered. )
VCI values :-
localCellId :-
===============================================================
==========
Transmission :-
lhsh 010600 ps port * (3202)choose AIUB : for available for 3202 cabinet only
exp:
lhsh 010600/port_0_dev_18 asc vswr : for available for 3202 cabinet
===============================================================
=======
===============================================================
============================
Must Perform at RNC:-
lpr utrancell=(Site Num) utranrelation : To find all relation Utrancell & GSM
lget (Site Name) primarys : To find sector scrambling codes for site.
lget utran primarysc (Scrambling code) : To find same scrambling which is using to
another site.
===============================================================
========================================
cvls : All Cv's Including Basic and Upgrade package with created
date.
===============================================================
========================================
===============================================================
=================================================
CHECK E-1
RNC
lst b1102 : ( print all atm layer com -note the aal2 )
st xxx : (proxy)