Professional Documents
Culture Documents
Mainboard D3067
Congratulations, you have decided to buy an
innovative Fujitsu product.
The latest information about our products, useful tips, updates etc. is available
from our website: "http://ts.fujitsu.com"
For automatic driver updates, go to: "http://ts.fujitsu.com/support/index.html"
Should you have any technical questions, please contact:
our Hotline/Service Desk (see the Service Desk list or visit:
"http://ts.fujitsu.com/support/servicedesk.html")
Your sales partner
Your sales office
We hope you really enjoy using your new Fujitsu system.
Copyright
Fujitsu Technology Solutions 2010/11
Published by
Fujitsu Technology Solutions GmbH
Mies-van-der-Rohe-Strae 8
80807 Munich, Germany
Contact
http://ts.fujitsu.com/support
All rights reserved, including intellectual property rights. Subject to technical alterations. Delivery subject to availability. No warranty is
offered or liability accepted in regard of the completeness, correctness, or current applicability of any data or illustrations. Brand
names may be protected trademarks of the respective manufacturer and/or protected by copyright. Use of these by the third parties
may constitute an infringement of the holders rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html"
Order No. Fujitsu Technology Solutions GmbH: A26361-D3067-Z230-1-7419, edition 1
Internal connectors and slots
Mouse
KeyB Module 2 Channel B
HDD/ODD
Module 4 Channel B Power
USB Temp. Sensor
Module 1 Channel A
Module 3 Channel A
Display
Frontpanel
Port
Power Supply
CPU
COM
DVI-I
LGA1155
Parallel Port
LAN FAN1
USB
PCIe4(16) Intrusion
Audio
TPM Enable
Intel-LAN PCIe16 Super
I/O FAN2
Temp. Sensor
Battery PCH
PCIe1
Desc Override
PCIe1 Enable SATA 4+5
USB 3+4
PCI USB 6
Audio Frontpanel FAN3
Reset
1
2
Recovery Power
DVI-I
On/Off
Power LED
USB dual channel 1 = 5V USB 6 = Data positive Port Y
2 = 5V USB 7 = GND Recovery inserted = The system starts
1 from USB stick and allows a BIOS recovery.
3 = Data negative Port X 8 = GND
2
4 = Data negative Port Y 9 = Key Details can be found in the BIOS manual.
5 = Data positive Port X 10 = Not connected
A26361-D3067-Z340-1-7619
First-time setup
Deutsch 5
English 15
Inhalt Deutsch - 1
Inhalt
Deutsch
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der bersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder hnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere fr den Fall der Patenterteilung oder GM-Eintragung.
Liefermglichkeiten und technische nderungen vorbehalten.
Kurzbeschreibung des Mainboards Deutsch - 3
Besondere Merkmale
Ihr Mainboard ist in verschiedenen Ausbaustufen erhltlich. Abhngig von der Konfiguration
Ihres Mainboards besitzt oder untersttzt das Mainboard bestimmte Merkmale.
In diesem Handbuch finden Sie die wichtigsten Eigenschaften dieses Mainboards beschrieben.
Externe Anschlsse
Die Position der externen Anschlsse Ihres Mainboards finden Sie am Anfang des Handbuches.
PS/2-Tastaturanschluss, violett PS/2-Mausanschluss, grn
Prozessor ein-/ausbauen
Fr alle hier beschriebenen Arbeiten muss Ihr System vollstndig von der Netzspannung
getrennt sein! Nhere Angaben dazu finden Sie in der Betriebsanleitung Ihres Systems.
Technische Daten
Sockel LGA 1155, max. 95W
Eine aktuelle Liste der von diesem Mainboard untersttzten Prozessoren finden
Sie im Internet unter: "http://ts.fujitsu.com/mainboards".
Fassen Sie auf keinen Fall die Unterseite des Prozessors an. Schon leichte
Verunreinigungen wie Fett von der Haut knnen die Funktion des Prozessors
beeintrchtigen oder den Prozessor zerstren. Setzen Sie den Prozessor mit
groer Sorgfalt in den Steckplatz, da die Federkontakte des Steckplatzes sehr
empfindlich sind und nicht verbogen werden drfen.
Sind ein oder mehrere Federkontakte verbogen, setzen Sie auf keinen Fall
den Prozessor ein, da dieser dadurch beschdigt werden knnte. Wenden
Sie sich bitte direkt an Ihren zustndigen Hndler
Vorgehensweise
Der Steckplatz fr Prozessor ist zum Schutz der Federkontakte mit einer Schutzkappe
abgedeckt. Im Garantiefall kann das Mainboard nur mit befestigter Schutzkappe
von Fujitsu Technology Solutions zurck genommen werden!
Je nach Ausbau-Variante mssen Sie eine Schutzfolie vom Khlkrper abziehen oder den
Khlkrper mit Wrmeleitpaste bestreichen, bevor Sie ihn aufsetzen.
Befestigen Sie den Khlkrper - je nach Ausfhrung - mit vier Schrauben
oder stecken Sie ihn in die Befestigungen.
Hauptspeicher ein-/ausbauen
Technische Daten
Technologie DDR3 1066 / 1333 MHz ungepufferte DIMM Module 240-Pin; 1,5 V;
72 Bit mit ECC und 64 Bit ohne ECC
Gesamtgre 1 bis 32 GByte DDR3
Wenn Sie mehr als ein Speichermodul verwenden, dann achten Sie darauf,
die Speichermodule auf beide Speicherkanle aufzuteilen. Dadurch nutzen
Sie die Performancevorteile des Dual-Channel-Mode.
Die maximale Systemperformance ist gegeben, wenn in Channel A und
Channel B identische Speichermodule verwendet werden.
Um die Bestckung zu erleichtern, sind die Steckpltze (Slots) farbig gekennzeichnet.
Abhngig von der Systemkonfiguration kann sich der sichtbare Hauptspeicher reduzieren.
Module 2 Channel B
Module 4 Channel B
Module 1 Channel A
Module 3 Channel A
BIOS Update
Wann sollte ein BIOS-Update durchgefhrt werden?
Fujitsu Technology Solutions stellt neue BIOS-Versionen zur Verfgung, um die Kompatibilitt
zu neuen Betriebssystemen, zu neuer Software oder zu neuer Hardware zu gewhrleisten.
Auerdem knnen neue BIOS-Funktionen integriert werden.
Ein BIOS-Update sollte auch immer dann durchgefhrt werden, wenn ein Problem besteht,
das sich durch neue Treiber oder neue Software nicht beheben lsst.
Wo gibt es BIOS-Updates?
Im Internet unter "http://ts.fujitsu.com/mainboards" finden Sie die BIOS-Updates.
First-time setup
Deutsch 5
English 15
Contents English - 1
Contents
English
Special features
Your mainboard is available in different configuration levels. Depending on the configuration,
your mainboard will be equipped with or provide support for certain features.
This manual describes the most important properties of this mainboard.
External ports
The location of the external connections of your mainboard is specified at the beginning of the manual.
PS/2 keyboard port, purple PS/2 mouse port, green
Audio input (Line in), light blue USB Universal Serial Bus, black
Technical data
Sockel LGA 1155, max. 95W
A current list of the processors supported by this mainboard is available on the
Internet at: "http://ts.fujitsu.com/mainboards".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processors operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert the processor as it
may be damaged by doing so. Please contact the responsible vendor.
Procedure
The processor socket is covered with a protective cap to protect the spring
contacts. In the event of a warranty case, the mainboard can only be taken back
by Fujitsu Technology Solutions with the protective cap secured!
Please note that, depending on the heat sink used, different heat sink
mounts are required on the mainboard.
Depending on the configuration variant, you must pull a protective foil off the heat sink
or coat the heat sink with heat conducting paste before fitting it.
Secure the heat sink - depending on the model - with four screws or push it into the mounts.
A current list of the memory modules recommended for this mainboard is available
on the Internet at: "http://ts.fujitsu.com/mainboards".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
You may only use unbuffered DDR3 memory modules with or without
ECC. Mixed assembly is not permissible.
DDR3 memory modules must comply with the PC3-8500 or PC3-10600 specification.
If you use more than one memory module, then make sure to distribute the
memory modules over both memory channels. By doing this you use the
performance advantages of the dual-channel mode.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
To simplify equipping, the slots are colour coded.
Depending on how the system is configured, the visible main memory can be reduced.
Module 2 Channel B
Module 4 Channel B
Module 1 Channel A
Module 3 Channel A
BIOS Update
When should a BIOS update be performed?
Fujitsu Technology Solutions makes new BIOS versions available to ensure compatibility with new
operating systems, new software or new hardware. In addition, new BIOS functions can be integrated.
A BIOS update should also always be performed if there is a problem that cannot
be solved using new drivers or new software.