You are on page 1of 16

COC 1 - Installing Computer Systems and Networks (2 Hours)

-Disassemble/ Assemble Desktop Computer


-Prepare Installer (Creating Portable Bootable Device)
-Configure BIOS
-Install Windows Server 2008 R2
-Install Microsoft Office
COC 2 - Configuring Computer Systems and Networks (2 1/2 Hours)
-Creating Network Cables
-Network Configuration
-Set router/Wi-Fi/wireless access point/repeater configuration
-Inspect and test configured computer network
COC 3 - Setup Computer Server (1 1/2 Hours)
-DHCP Server
-DNS Server
-File Services
-Folder Redirection
-Remote Desktop
-Printer Management
COC 4 - Maintaining Computer Systems and Networks (1 Hour)
-Creating System Restore Point
-Creating System Backup Image
-Using the created Restore Point to restore the system
-Using the created Backup Image
-Disk Defragmentation
-Disk Cleanup
-Scanning for viruses (anti-virus)
-Oral Questioning

Tools, Materials, Equipment


PC Disassemble/Assemble
-Screw Drivers (Standard, Philip)
-Pliers (Mechanical, Longnose) - optional
-Anti-static Wrist Strap - optional
-Anti-static Mat - optional

For OS Installation:
-Windows Server 2008 Installer
-Windows 7 Installer (During Assessment, you will only install Windows Server
2008R2)
-Device Drivers

For Networking:
-Impact Punch Down Tool
-Crimping Tool
-RJ-45
-UTP Cable
-ptch Panel
-Network Switch
-Router with WI-FI

Certificate of Completion 3
Set-up Computer Server
Task 1: Setting IP address back to Static
(Your last task in COC2 was to set the IP address to Dynamic/ Obtain. This time you need
to change it back to static. The following IP address serves as an example)

Task 2: Setting FDRP, FDPH, SSDP, UPnP to Automatic

A. Set Function Discovery Resource Publication to Automatic

B. Set Function Discovery Provider Host to Automatic

C. Set SSDP Discovery to Automatic

D. Set UPnP Device Host to Automatic


Now, turn on Network Discovery, file and printer sharing but turn off password
protected sharing
How to pass the assessment of Computer Systems Servicing NC II?

To pass this assessment you need these following:

For Assemble PC:

1. Make sure you are knowledgeable about static electricity or ESD, why do I say
that? Because I see some candidates or students taking this for granted and the
result? The computer have been damaged and can't even boot in BIOS settings.

2. Make sure you are familiar in the connection of Front Panel Led's in the
motherboard because not all mobo have the same standard in connecting this
wire(s). And take note some Assessor are very strict on this part, though your PC
is working they will not accept incorrect connection.

3. Be 90% calm and 10% nervous. Being nervous is really part of taking the
assessment. :P , if you're not then good for you :)
For OS Installation:

1. This is the easiest part, just make sure you install the operating system in its right
location I mean Drive C: (exception is for the dual OS). If you failed on this one it
will consume your time, always remember that the assessment has a time
duration.

2. Install the appropriate drivers ONLY, Do not install other software included in the
CD/DVD installer (Ex. Adobe Acrobat etc.) it will just consume your time.

For Networking:

1. Use a good crimping tool and punch down tool

2. Create network cables slowly but surely (but make sure it will not take too long,
we have time duration remember?)

3. Make sure you memorize the wiring arrangement of creating straight-thru and
crossover cables

4. You must be knowledgeable in configuring wireless router

For Server Setup:

1. You should know how to configure the following:

DHCP

DNS

QOS

MAC Filtering

File/Printer Server

Remote Desktop
For Maintenance:

1. You should know how to:

Create and Use System Image

Install and Use anti-virus, registry cleaner, disk defragmentation

Create and Use System Restore

For Oral Questioning:

1. This will be based in all your task and some theoretical knowledge when you are
in college :)

Posted by CSS NCII at 9:40 PM 12 comments:


Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

What are the requirements in Computer Systems Servicing NC II?

These are the requirements (Tools, Materials, Equipment) for CSS NC II:

For Assemble PC:

Screw Drivers (Standard, Philip)

Pliers (Mechanical, Longnose) - optional

Anti-static Wrist Strap - optional

Anti-static Mat - optional

For OS Installation:

Windows Server 2008 Installer


Windows 7 Installer

Device Drivers

For Networking:

Impact Punch Down Tool

Crimping Tool

RJ-45

Modular RJ-45 I/O

Patch Panel

Network Switch

Router with WI-FI

For Server Setup:

Windows Server 2008 PC

Windows 7 PC

Laptop (Windows 7 or Windows 8)

For Maintenance:

Blank DVD-R (for System Image)

Anti-virus Installer (Ex. Avast, Avg etc.)

Registry Cleaner (Ex. CCleaner)

Disk Defragmenter (Ex. Defragler)


System Restore (Restorepoint)

Tip: Bring your own Crimping Tool, hate to say this but some assessment center tools
like this one is dull. :P

Posted by CSS NCII at 9:06 PM 1 comment:


Email ThisBlogThis!Share to TwitterShare to FacebookShare to Pinterest

Thursday, June 25, 2015


What is New in Computer Systems Servicing NC II?

Hi to all, its been a while since I open this blog / website but this is the only time that I've
post again :)

Okay, lets talk about What's New in this modified qualification of Technical Education for
Skills Development Authority (TESDA) for Computer Hardware Servicing NC II that
becomes Computer Systems Servicing NC II. Lets compare the tasks that
both qualification have:

In Computer Hardware Servicing NC II (CHS NC II), these are the tasks that you
have to undergo:

Task 1: Write or Enumerate at least six Occupational Health Safety Policies and
Procedures (OHS).

Task 2: Inventory all the Tools, Equipment, Materials and Work Area used or under CHS
NC II.

Task 3: Assemble a Desktop Computer and configure the system

Task 4: Install Operating System and Device Drivers

Task 5: Computer Networking

Creating Network Cables (Crossover, Straight-thru cable)

Network Configuration

File and Printer Sharing

Restore / Backup
Task 6: Oral Questioning

And for Computer Systems Servicing NC II, these are the new tasks:

Task 1: Assemble Desktop Computer

Task 2: Install Operating System and Appropriate Device Drivers

Windows 7 or Windows 8

Windows Server 2008 R2 or latest Server OS

Task 3: Setup Computer Networks

Creating Network Cables

Configuring Router (Wireless, MAC, QOS, Port Forwarding)

Network Configuration

Task 4: Setup Computer Servers

DHCP Server

DNS Server

File Services

Remote Desktop

Task 5: Maintain Computer System

Creating System Restore Point

Creating System Backup Image

Using the created Restore Point to restore the system

Using the created Backup Image

Disk Defragmentation
Disk Cleanup

Scanning for viruses (anti-virus)

Task 6: Oral Questioning

You might also like