Professional Documents
Culture Documents
4 Formulas for flat plates with straight boundaries and constant thickness (Continued )
SEC.
tension P lb=linear the following values:
in applied to all
11.14]
edges
Coef. P=PE 0 0.15 0.5 1 2 3 4 5
a=b
In the above formulas sa and sb are stresses due to bending only; add direct stress P=t to sa and sb : (Ref. 42)
bqb2 aqb4
2. Rectangular plate; three 2a. Uniform over entire smax 2 and ymax
t Et3
edges simply supported, plate
one edge (b) free
a=b 0.50 0.667 1.0 1.5 2.0 4.0
Flat Plates
(Ref. 8 for v 0:3)
2 4
bqb aqb
2d. Uniformly smax and ymax
t2 Et3
increasing along
the a side a=b 0.50 0.667 1.0 1.5 2.0 2.5 3.0 3.5 4.0
505
b 0.11 0.16 0.20 0.28 0.32 0.35 0.36 0.37 0.37
a 0.026 0.033 0.040 0.050 0.058 0.064 0.067 0.069 0.070
(Ref. 8 for v 0:3)