You are on page 1of 6

CAD/CAM-Prostheses and Bridges:

Perfect Fit the First Time

new
CAD/CAM-Prostheses and Bridges

Tension-free seating Computer-controlled precision Perfect framework structure


perfect fit the first time maximum customization outstanding esthetics

DENTSPLY Implants uses a unique The scanning process at the The centrally milled DENTSPLY
CAD/CAM-milling process for the DENTSPLY CAD/CAM-Center records CAD/CAM-structure offers superior
manufacture of bars and screw- all individual coordinates of the results compared to standardized,
retained bridge frameworks. wax-up accurately. The data are not customized milled structures
Computer-controlled fabrication of used to create the patient-specific from alloys with a particularly
structures provides a high degree design of the superstructure on smooth and homogenous structure
of precision and avoids extensive the computer and are coordinated of the material. The metal structure
adaptations as for the casting pro- with the dental laboratory. The of removable solutions is always
cess in the laboratory. Even complex laboratory can include individual perfectly integrated with the
bridges and bar constructions on six requirements or corrections. computer-guided planning. With
and more implants are fabricated The CAD/CAM-Center prepares a the optimum design of the bridge
completely tension-free. It is not customized milling strategy and frameworks your laboratory will
necessary to segment large spans. starts the milling process once the supply a brilliant esthetic result.
laboratory has approved the design.

DENTSPLY CAD/CAM-Center

CAD: the DENTSPLY CAD/CAM-Center scans every detail of the model and wax-up
and uses the data to develop a patient-specific design proposal for the planned
construction. The virtual 3D planning is sent online to the dental laboratory for
approval. The laboratory can then use free software to send change requests or
corrections.

Dentist

Dental laboratory

Impressions Model and wax-up/mock-up


The essential prerequisite for a successful restoration Based on the impression, the laboratory
is an accurate impression of the clinical situation. prepares the model and the wax-up. Both
Please note the recommendations on the back. are sent to the DENTSPLY CAD/CAM-
Center.
A New Dimension of Accuracy
Perfect Fit the First Time

Peri-implant situation Predictable success


stable and irritation-free calculable processes

ANKYLOS bridges and bar- CAD/CAM-processing gives you


retained dentures are integrated the planned prosthetic result
at gingiva level. The use of the quickly and accurately. And this
clinically proven, prefabricated can be achieved within a calculable 1_
TissueCare Connection with new, time and financial framework: Individuality: Customized result
even with complex situations
narrower ANKYLOS Balance base your laboratory receives the milled
abutments ensures long-term constructions at the fixed price
stable and irritation-free peri- and complex rework and thus,
implant conditions. The very light additional patient appointments
titanium structure is also highly are not necessary.
biocompatible.

2_
Predictable result:
Perfect fit the first time

3_
Optimum design: Brilliant esthetics
with computer-guided planning

Dental Techique:
Photo 2&3: Olaf van Iperen,
CAM: Once the dental laboratory has approved the design, the DENTSPLY Wachtberg/Germany
CAD/CAM-Center develops the individual milling strategy for fabrication of the Other photos: MDT Bjrn Roland,
Klein-Winternheim/Germany
structure. The milling program takes into account the patient-specific planning
data along with material-specific or technical fabrication parameters. This is
followed by milling the construction from titanium or cobalt-chromium.

Dentist

Dental laboratory

Completion of the bridge or prosthesis Delivery


On receipt of the milled structure the laboratory completes the fabrication of the The bridge or bar denture is delivered to the patient
bar-retained denture or the esthetic veneering of the bridge framework. in the standard procedure.
CAD/CAM-Prostheses and Bridges:
Perfect Fit the First Time
With CAD/CAM-prosthetics from DENTSPLY Implants you can provide restorations
for partially edentulous and edentulous patients with implant-supported screw-
retained bridges and removable bar dentures with hitherto unknown precision.
Bridge and prosthesis fi t perfectly on delivery and are seated absolutely without
tension. Additional sessions for retrospective adjustments are no longer necessary.

The advantages at a glance:

n Tension-free seating
perfect fit the first time

n Computer-controlled precision
maximum customization

n Perfect framework structure


outstanding esthetics

n Peri-implant situation
stable and irritation-free

n Predictable success
calculable processes

Photo: Olaf van Iperen, Wachtberg/Germany


ANKYLOS CAD/CAM-prostheses and bridges at a glance

Prosthetic indications:
n Removable dentures on bars screwed to implants
n Screw-retained bridge constructions with ceramic or plastic veneer

Fixation of superstructure at gingiva level:


n 2 to 10 ANKYLOS implants and ANKYLOS Balance
base abutments C/ 4.2 mm

Impressions:
We recommend the pick-up technique for CAD/CAM structures. Make sure that the
customized tray has sufficient space for transfer posts and pick-up screws. With
the customized tray the impression material can be of a uniform thickness, unlike
ready-made trays which may vary in thickness. This reduces the absolute and relative
shrinkage and distortion of the impression material that tends to be encountered
when the thickness of the material varies.

n Uncover implants if necessary, remove gingiva-forming components


n Fix ANKYLOS Balance C/ transfer post (PickUp technique) to implant
with transfer screw

Please follow these instructions closely under all circumstances. They make a major
contribution to the accuracy of your impression and this is a basic requirements for
accurate fabrication of the CAD/CAM-structures.

Material of milled structure:


n Titanium
n Cobalt-chromium alloy

Order no. 6-252063/001

Some products may not be available in all countries.


Please contact your DENTSPLY Implants representative to obtain
up to date information on the product range and on availability.

Manufacturer:
www.dentsplyimplants.com
0309/3.0/GVD

Manufacturer CAD/CAM-framework:
E.S. Healthcare n.v. Research Campus 10 3500 Hasselt/Belgium

You might also like