SPECIFICATION FOR BATTERY AND BATTERY CHARGER (TRIPPING UNIT)FOR Offered
11KV INDOOR SWITCHGEAR
ITEM DESCRIPTION Self Contained Battery and Charger Unit, 30VDC
AMBIENT CONDITIONS For Indoor use with natural ventilation under highly corrosive and tropical atmosphere having maximum room temperature of 50 0 C without air-conditioning. APPLICATION/USAGE Used as Tripping and control supply to 11KV Indoor Switchgear Units RATINGS Required Output Voltage = 30VDC Battery Ampere hour Capacity = 20AH (minimum) Charger output Current = 10A Charger Input = From Standard 13A, 240VAC, 50Hz socket-outlet ENCLOSURE Protective coated sheet steel enclosure, with sufficient ventilation suitable for AN conditions ENCL. IP CLASS Not less than IP21 MOUNTING Facility for Wall or Floor Mounting REQUIRED FEATURES Nickel-Cadmium rechargeable battery (Sealed-Maintenance free type) Automatic boost charging facility Complete Input & Output with Proper Isolation links Test facility for Battery charge level Protection of all components, including input and rectifier bank through properly rated MCBs Current and voltage Indicators (analogue type) shall be provided Load protection & Isolation of battery through properly rated MCB The MCBs Trip & alarm contacts should be monitored Alarm & Status Indication of all important events Battery low voltage indication shall be provided Interface for remote monitoring facility should be connected to dedicated terminals (Note: Following documents to be submitted along with the tender offer or submittal for approval) DOCUMENTS TO BE Technical Data Sheets with all parameters SUBMITTED Specific Product catalogue & Data-sheets Operation & Maintenance Instructions Manufacturer details and country of Origin Copy of valid ISO 9001 certificate & Battery type test certificate Statement of Compliance or deviations from our specification (as referred above) Confirmation to provide 5-years warranty of the battery APPROVED PRODUCTS Name of Manufacturer Type/Model Designation
Department of Computer Engineering Academic Year 2020-21 Class: SE Computer & IT Subject: 22226 PCI (Programming in C) MCQ Unit 1: Program Logic Development MCQ Question Bank With Answers