You are on page 1of 31

SAPURA KENCANA PETROLEUM

(FABRICATION YARD)
OFFSHORE STRUCTURES FIELD TRIP
18 TH MARCH 2017
Arrived at Destination

Sapura Kencana Fabrication Yard located in Lumut, Perak


200 acres of area
Breakfast provided Safety briefing by HSE
The side current is working on two jacket platform. One drilling jacket and one more is production with living
quarters. Both jacket is designated to be used at Sarawak field. One is owned by Sapura Kencana energy itself and
one more is Petronas.
JACKET LEGS
Jacket Legs

Weigh=2000t
Skirt pile
J-tube Riser
Ballast component
Conductor (hole
4x4)
Yellow and
dark brown
legs indicate
the MSL.
Mud mat:
provides stability
to the jacket legs
Sacrificial anode
installed on the
jacket legs and
bracings for
corrosion
protection.
3
1. Boat Landing
2 2. Riser
1 protection -steel

3. Crane
When at the join the diameter is thicker because there are more force acting at joint. As can see also
the support lift to help the jacket lifted to be assemble before boggey lift it and transport it to the
barge.
TOPSIDE FACILITIES
The topside
which consists of
main deck (top)
and the cellar
deck (bottom)
1
1. Central
2 Processing
Platform.

2. Living
Quarters.
From right hand side is the main platform which consists of the living quarters and office while on the
left hand side is the facilities platform.
Center Processing
Platform (CPP)

Unmanned
platform
Diesel
Pedestrian crane
1. Living
Quarters
(70 pax)

2.Helideck
(Aluminium)

3.ENI room
The overview of
production platform
Red color represents
the water pump
White color is for
hydrocarbon
Green for generator.
The Grey structure on
top is used for lifting
and hook up to the
jacket leg offshore and
is cut off during
commissioning.
Flare
Tower
Flare boom to be
installed on the
rig (wellhead
platform)
EXTRA INFORMATIONS
The structure to pull the structure near to the sea is called boogie.
PLET : process hydrocarbon for subsea facilities
PLEM : traffic system for subsea facilities
The OD of the legs are vary but the ID is the same throughout the whole legs.
The riser diameter for gas is larger than oil.
Process and Life Cycle of Platform: Fabrication, testing, exportation to the site, installation, hook-
up (lifting) , commissioning (welding), drilling & production, decommissioning
Living quarters, processing platform, flare tower and jacket legs will install in offshore.
Temporary beam ( Grey colour)

Built temporarily for ease of work access during construction.


Grey grating at the center act as a hook for crane to lift the whole structure
during loading or installation.
After installation is complete, temporary beam will be cut.
Hydrocarbon pipe

Use to transport gas


Painted in white to indicate hydrocarbon pipe
Utility pipe is usually painted in red such as fresh
water from onshore
Components are: elbow, flange, pipe and valve.
Personnel
pointing to the
elbow which is
a component of
flowline (gas).
THE END

You might also like