You are on page 1of 169

01 /09/2013

METERIAL / EQUIPMENT Pre-Qualified


SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
1 POWER TRANSFORMERS

1.1 33KV & 34.5 KV PRIMARY


1. 1. 1 POWER TRANSFORMERS UP TO 30 MVA Applicable Standards: 53-TMSS-01

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ABB Bilbao SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.
Aug 2009, it is pre-qualified for Power Transformer up to 132kV,
100MVA as confirming to SEC specification # 53-TMSS-01, rev.0
with the following conditions:

All type, design, special & routine tests (including short


circuit test) as per SEC specifications/standards shall be carried
out on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
ABB Elektrik Sanayi A.S. [previously ABB ESAS] TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's
Projects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009
ABB TRANSIT OY FINLAND Yes
AREVA GERMANY Yes
BEST TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years
Warranty from the date of PAC is required.

Page 1 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
CG Electric Systems Zrt. (previously GANZ HUNGARY-Budapest Yes Based on TS&SD Letter 11-01981-1-03032301 dated July 11,
Transelektro Electric Co., Ltd.) 2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:

All Type, Special & Routine tests as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the next unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
10513/10/CG dated July 04, 2011 and letter# 20338/12/CG
dated August 04, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.

Pre-Qualification & Participation for current & future SEC's


Projects subjected to the fulfillment of confirmation letter #
20342/12/CG dated August 14, 2012 by manufacturer.
CG POWER SYSTEMS BELGIUM Yes
CROMPTON GREAVES INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD
DAIHEN CORPORATION JAPAN-OSAKA Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HAWKER SIDDELEY United Kingdom Yes
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes
HYUNDAI KOREA, Republic of-Ulsan Yes

Page 2 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ILJIN Electric Co. Ltd. SOUTH KOREA-- Yes Based on S&SD Letter 12-03077-30504401 dated September 15,
2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 33kV & 34.5kV rated up to 30MVA as conforming
to SEC Specification # 53-TMSS-01, Rev.0, with the following
conditions:

All Type, Routine and Special testes as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers 33kV
and/or 34.5kV rated up to 30MVA in The Manufacturer's Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer ILJIN ELECTRIC Co.
Ltd. through their letter # IJ-20120725-01 dated July 25, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.
JEUMONT SCHNEIDER FRANCE Yes
KONCAR D&ST Croatia/Hrvatska Yes Based on S&SD Letter 12-02568-30504401 dated September 17,
2012, it is pre-qualified for Power Transformers rated up to 33kV
& 34.5kV, 30MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:

All Type, Special & Routine tests as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated 09 March 2006.

Page 3 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Liaoning - Efacec Electrical Equipment Co., Ltd CHINA-Liaoning Province Yes Based on S&SD Letter 12-01675-30504401 dated May 20, 2012.
(LEEEC) It is prequalified for Power Transformers rated up to 30 MVA as
conforming to SEC Specification# 53-TMSS-01 with the following
condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by Liaoning - Efacec Electrical Equipment
Co., Ltd (LEEEC) through their letter # Nil dated April 18, 2012.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SC ELECTROPUTERE SA Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.
SCHNEIDER ELECTRIC TURKEY-Kocaeli Yes Previously "AREVA-Turkey", the name has been changed to
Schneider Electric-Turkey based on Schneider Electric letter #
MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL
25.11.2010.
SCHORCH GERMANY Yes
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
WILSON TRANSF AUSTRALIA-MELBOURNE Yes

Total = 28

1.2 69 KV PRIMARY
1. 2. 1 POWER TRANSFORMERS UP TO 67 MVA Applicable Standards: 53-TMSS-01

ABB SWITZERLAND Yes


ABB SWEDEN Yes
ABB ( T& D) United States-N/A Yes

Page 4 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB Bilbao SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.
Aug 2009, it is pre-qualified for Power Transformer up to 132kV,
100MVA as confirming to SEC specification # 53-TMSS-01, rev.0
with the following conditions:

All type, design, special & routine tests (including short


circuit test) as per SEC specifications/standards shall be carried
out on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
ABB Elektrik Sanayi A.S. [previously ABB ESAS] TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's
Projects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009
ABB TRANSIT OY FINLAND Yes
AREVA GERMANY Yes
BEST TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years
Warranty from the date of PAC is required.
CG Electric Systems Zrt. (previously GANZ HUNGARY-Budapest Yes Based on TS&SD Letter 11-01981-1-03032301 dated July 11,
Transelektro Electric Co., Ltd.) 2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:

All Type, Special & Routine tests as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the next unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
10513/10/CG dated July 04, 2011 and letter# 20338/12/CG
dated August 04, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.

Pre-Qualification & Participation for current & future SEC's


Projects subjected to the fulfillment of confirmation letter #
20342/12/CG dated August 14, 2012 by manufacturer.
CG POWER SYSTEMS BELGIUM Yes

Page 5 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
DAIHEN CORPORATION JAPAN-OSAKA Yes
EFACEC PORTUGAL Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes
HYUNDAI KOREA, Republic of-Ulsan Yes
ILJIN Electric Co. Ltd. SOUTH KOREA-- Yes Based on S&SD Letter 12-03077-30504401 dated September 15,
2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 69kV rated up to 67 MVA as conforming to SEC
Specification # 53-TMSS-01, Rev.0, with the following
conditions:

All Type, Routine and Special testes as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers 69kV
rated up to 67MVA in The Manufacturer's Testing Laboratory in
the presence of three (3) SEC Engineers & one (1) SEC
approved Independent Inspection Agency (IIA) Inspector. All
costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer ILJIN ELECTRIC Co.
Ltd. through their letter # IJ-20120725-01 dated July 25, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.
JEUMONT SCHNEIDER FRANCE Yes

Page 6 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
KONCAR D&ST Croatia/Hrvatska Yes Based on S&SD Letter 12-02568-30504401 dated September 17,
2012, it is pre-qualified for Power Transformers rated up to
69kV, 40MVA only as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:

All Type, Special & Routine tests as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated 09 March 2006.
Liaoning - Efacec Electrical Equipment Co., Ltd CHINA-Liaoning Province Yes Based on S&SD Letter 12-01675-30504401 dated May 20, 2012.
(LEEEC) It is prequalified for Power Transformers rated up to 67 MVA as
conforming to SEC Specification# 53-TMSS-01 with the following
condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by Liaoning - Efacec Electrical Equipment
Co., Ltd (LEEEC) through their letter # Nil dated April 18, 2012.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SC ELECTROPUTERE SA Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.
SCHNEIDER ELECTRIC TURKEY-Kocaeli Yes Previously "AREVA-Turkey", the name has been changed to
Schneider Electric-Turkey based on Schneider Electric letter #
MKT-18.01.11 dated 18/01/2010 and AREVA T&D letter # BF/BL
25.11.2010.

Page 7 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Siemens AG (Dresden) GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May
2009 , Siemens AG from Germany-Dresden for Power
Transformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the
following conditions:
All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TAMINI ITALY Yes
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
WILSON TRANSF AUSTRALIA-MELBOURNE Yes

Total = 29

1.3 110 KV TO 132 KV PRIMARY


1. 3. 1 POWER TRANSFORMERS UP TO 100 MVA Applicable Standards: 53-TMSS-01

ABB SWITZERLAND Yes


ABB SWEDEN Yes
ABB ( T& D) United States-N/A Yes
ABB Bilbao SPAIN-Bilbao Yes Based on TS&SD letter# 09-F01546/03-03032301 dated 19th.
Aug 2009, it is pre-qualified for Power Transformer up to 132kV,
100MVA as confirming to SEC specification # 53-TMSS-01, rev.0
with the following conditions:

All type, design, special & routine tests (including short


circuit test) as per SEC specifications/standards shall be carried
out on the first unit to be supplied to SEC in securing an order in
the presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.

Seven (7) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.

Page 8 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB Elektrik Sanayi A.S. [previously ABB ESAS] TURKEY-Istanbul Yes Pre-Qualification & Participation for current & future SEC's
Projects subjected to the mutual agreement between SEC & ABB
dated 09 March 2009
ABB TRANSIT OY FINLAND Yes
ALSTOM Grid TURKEY-Gebze Yes Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
AREVA GERMANY Yes
BEST TURKEY Yes Complete Type, Routine / Sample tests for first order & 10 Years
Warranty from the date of PAC is required.
CG Electric Systems Zrt. (previously GANZ HUNGARY-Budapest Yes Based on TS&SD Letter 11-01981-1-03032301 dated July 11,
Transelektro Electric Co., Ltd.) 2011, it is pre-qualified for Power Transformers rated up to
132kV/100MVA as conforming to SEC Specification #
53-TMSS-01, Rev.0, with the following conditions:

All Type, Special & Routine tests as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the next unit to be supplied to SEC in an accredited Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer through their letter #
10513/10/CG dated July 04, 2011 and letter# 20338/12/CG
dated August 04, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 15, 2010.

Pre-Qualification & Participation for current & future SEC's


Projects subjected to the fulfillment of confirmation letter #
20342/12/CG dated August 14, 2012 by manufacturer.
CG POWER SYSTEMS BELGIUM Yes
CROMPTON GREAVES INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD.
DAIHEN CORPORATION JAPAN-OSAKA Yes
EFACEC PORTUGAL Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HAWKER SIDDELEY United Kingdom Yes

Page 9 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes
HYUNDAI KOREA, Republic of-Ulsan Yes
Hyundai Heavy Industries Co. Bulgaria Bulgaria-Sofia Yes Based on TS&SD letter # 11-00438-03-03032301 dated
15/05/2011, it is prequalified for Power Transformers up to
132kV, 100MVA as confirming to SEC specification #
53-TMSS-01, Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards
for Power Transformers up to 132kV, 100MVA shall be carried
out in case of contract award or SEC direct purchase order at
SEC approved independent laboratory or at manufacturers
testing laboratory in presence of three (3) SEC Engineers and
one (1) SEC approved independent inspection agency. All the
related costs for witnessing of the tests will be borne by the
manufacturer. This was confirmed by HHIBulgaria through
letter # D-0353 dated 20/08/2010.

Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
HHIBulgaria through letter # D-0355 dated 20/08/2010.

Page 10 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ILJIN Electric Co. Ltd. SOUTH KOREA-- Yes Based on S&SD Letter 12-03077-30504401 dated September 15,
2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 110kV to 132kV rated up to 100MVA as
conforming to SEC Specification # 53-TMSS-01, Rev.0, with the
following conditions:

All Type, Routine and Special testes as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers with
voltage class of 110kV or 115kV or 132kV rated up to 100MVA in
The Manufacturer's Testing Laboratory in the presence of three
(3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed in writing by the
manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120725-01 dated July 25, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.
JEUMONT SCHNEIDER FRANCE Yes
KONCAR D&ST Croatia/Hrvatska Yes Based on S&SD Letter 12-02568-30504401 dated September 17,
2012, it is pre-qualified for Power Transformers rated up to
110kV to 132kV, 40MVA only as conforming to SEC Specification
# 53-TMSS-01, Rev.0, with the following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project. This was confirmed in writing by the
manufacturer through their letter # Nil dated 09 March 2006.
Liaoning - Efacec Electrical Equipment Co., Ltd CHINA-Liaoning Province Yes Based on S&SD Letter 12-01675-30504401 dated May 20, 2012.
(LEEEC) It is prequalified for Power Transformers rated up to 100 MVA as
conforming to SEC Specification# 53-TMSS-01 with the following
condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed in writing by Liaoning - Efacec Electrical Equipment
Co., Ltd (LEEEC) through their letter # Nil dated April 18, 2012.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
NISSIN ELECTRIC JAPAN Yes

Page 11 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SC ELECTROPUTERE SA Romania-Craiova Yes Based on TS&SD letter # 11-002054-1-03032300
dated10/7/2011, it is prequalified for Power Transformer up to
132kV, 100MVA, as conforming to National Grid SA specification
# 53-TMSS-01, Rev.0 with the following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order. This was
confirmed by SC Electroputere SA through letter 27500 dated
14/06/2010.
Siemens AG (Dresden) GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May
2009 , Siemens AG from Germany-Dresden for Power
Transformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the
following conditions:
All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
WILSON TRANSF AUSTRALIA-MELBOURNE Yes

Total = 32

1.4 230 KV PRIMARY


1. 4. 1 POWER TRANSFORMERS UP TO 400 MVA Applicable Standards: 53-TMSS-02

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes

Page 12 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB Cordoba SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated
August 16, 2009. It is pre-qualified for Power Transformer up to
380kV, 500MVA as confirming to SEC specification #
53-TMSS-02, rev.0 with the following conditions:

All type, design, special (exclude Short-Circuit Test) & routine


tests as per SEC Specifications/Standards together with Thermal
& Dynamic short-circuit calculations per IEC 60076-5 shall be
carried out on the first unit to be supplied to SEC in an
accredited Independent Testing Laboratory or in the
manufacturer's testing laboratory in the presence of three (3)
SEC Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # PPTR-002.2 dated February
14, 2009 and the submitted "Confirmation Letter" # Nil dated
November 18, 2008. [this condition has been modified based on
S&SD letter# 12-0395-01-30504001 dated February 12, 2012]

Seven (7) years extended warranty from the date of PAC of


the First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their
submitted "Guarantee/Warranty Certificate" # Nil dated May 25,
2009.
ALSTOM Grid TURKEY-Gebze Yes Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
AREVA GERMANY Yes
CG POWER SYSTEMS BELGIUM Yes
DAIHEN CORPORATION JAPAN-OSAKA Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HAWKER SIDDELEY United Kingdom Yes
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Page 13 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July
2009, it is pre-qualified for Power Transformer up to 380kV,
500MVA as confirming to SEC specification # 53-TMSS-02, rev.0
with the following conditions:
All type, design, special & routine tests as per SEC
specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the presence of three
(3) SEC engineers & one (1) approved independent inspection
agency Inspector.
Seven (7) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
HYUNDAI KOREA, Republic of-Ulsan Yes
ILJIN Electric Co. Ltd. SOUTH KOREA-- Yes Based on S&SD Letter 12-03077-30504401 dated September 15,
2012, ILJIN ELECTRIC Co. Ltd - Korea is pre-qualified for Power
Transformers 230kV rated up to 166.7MVA only as conforming
to SEC Specification # 53-TMSS-02, Rev.0, with the following
conditions:

All Type, Routine and Special testes as per SEC


Specifications/Standards together with Thermal & Dynamic
short-circuit calculations per IEC 60076-5 shall be carried out on
the First unit to be supplied to SEC of Power Transformers
230kV rated up to 166.7MVA only in The Manufacturer's Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer ILJIN ELECTRIC Co.
Ltd. through their letter # IJ-20120725-01 dated July 25, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
the manufacturer ILJIN ELECTRIC Co. Ltd. through their letter #
IJ-20120628-01 dated June 28, 2012.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Page 14 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Siemens AG (Dresden) GERMANY-Dresden Yes based on TS&SD letter# 09-01501-03032301 dated 25th May
2009 , Siemens AG from Germany-Dresden for Power
Transformer up to 230kV, 200MVA as confirming to SEC
specification # 53-TMSS-01, rev.0 & 53-TMSS-02, rev.0 with the
following conditions:
All type, special & routine tests for each voltage class as
per SEC specifications/standards shall be carried out on the first
batch to be supplied to SEC in securing an order in the presence
of three (3) SEC engineers & one (1) approved independent
inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
WILSON TRANSF AUSTRALIA-MELBOURNE Yes UP TO 100 MVA ONLY

Total = 19

1.5 380KV PRIMARY


1. 5. 1 POWER TRANSFORMERS UP TO 500 MVA Applicable Standards: 53-TMSS-02

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes

Page 15 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB Cordoba SPAIN-Cordoba Yes Based on TS&SD letter# 09-F011657/03-03032301 dated
August 16, 2009. It is pre-qualified for Power Transformer up to
380kV, 500MVA as confirming to SEC specification #
53-TMSS-02, rev.0 with the following conditions:

All type, design, special (exclude Short-Circuit Test) & routine


tests as per SEC Specifications/Standards together with Thermal
& Dynamic short-circuit calculations per IEC 60076-5 shall be
carried out on the first unit to be supplied to SEC in an
accredited Independent Testing Laboratory or in the
manufacturer's testing laboratory in the presence of three (3)
SEC Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # PPTR-002.2 dated February
14, 2009 and the submitted "Confirmation Letter" # Nil dated
November 18, 2008. [this condition has been modified based on
S&SD letter# 12-0395-01-30504001 dated February 12, 2012]

Seven (7) years extended warranty from the date of PAC of


the First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their
submitted "Guarantee/Warranty Certificate" # Nil dated May 25,
2009.
ALSTOM Grid TURKEY-Gebze Yes First Unit to be Type Tested in the presence of 3 SEC Engineers
& 1 SEC approved Independent Inspector; Extended Warranty of
Six years.

Previously AREVA T&D-Turkey [The name has been changed


based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
AREVA GERMANY Yes
CG POWER SYSTEMS BELGIUM Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HAWKER SIDDELEY United Kingdom Yes
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Page 16 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes Based on TS&SD fax#09-F01255/02-03032301 dated 25th. July
2009, it is pre-qualified for Power Transformer up to 380kV,
500MVA as confirming to SEC specification # 53-TMSS-02, rev.0
with the following conditions:
All type, design, special & routine tests as per SEC
specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the presence of three
(3) SEC engineers & one (1) approved independent inspection
agency Inspector.
Seven (7) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
HYUNDAI KOREA, Republic of-Ulsan Yes
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 15

2 PAD MOUNTED DISTRIBUTION TRANSFORMERS

2.1 13.8 KV, 33KV & 34.5 KV PRIMARY


2. 1. 1 DIST. TRANSFORMERS UP TO 2 MVA Applicable Standards: 51-TMSS-01

ABB Saudi Arabia-RIYADH Yes


ALFANAR ELECTRICAL SYSTEMS Saudi Arabia-RIYADH Yes Based on TS&SD letter # 11-03272-03032301 dated
16/11/2011, it is prequalified for Station Service Transformer up
to 1.5MVA only as conforming to SEC/National Grid SA
specification # 51-TMSS-01, Rev.0 with the following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order. This was
confirmed by ALFANAR Electrical Systems (AES)Riyadh through
letter # Nil dated 09/04/2011.
FEDERAL TRANSFORMERS CO. United Arab Emirates-ABU DHABI Yes UP TO 1.5 MVA
KONCAR D&ST Croatia/Hrvatska Yes UP TO 2.5 MVA. Complete Type, Routine / Sample tests for first
order & 10 Years Warranty from the date of PAC is required.

Page 17 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Saudi Federal Transformers L.L.C. Saudi Arabia-Riyadh Yes Based on S&SD Letter 12-01572-2-30504401 dated May 27,
2012, it is pre-qualified for Power Transformers rated up to 36KV
& 2MVA as confirming to SEC Specification # 51-TMSS-01 with
the following conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of Power Transformers rated up to 36KV & 2MVA in
an Accredited Testing Laboratory approved by SEC in the
presence of three (3) SEC Engineers & one (1) SEC approved
Independent Inspection Agency (IIA) Inspector. All costs of
related to tests shall be borne by the manufacturer. This
prequalification requirement was confirmed by Saudi Federal
Transformers L.L.C., Riyadh in writing through their letter #
SFTL/PQ/TMSS/O2/2012l dated April 28, 2012.

Ten (10) years extended warranty in respect of defects due to


design , manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed through Saudi Federal Transformers L.L.C.,
Riyadh letter # SFTL/TES/545/2012 dated May 05, 2012.
SAUDI TRANSFORMERS CO. Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLY
United Transformers Electric Co. (UTEC) Saudi Arabia-Riyadh Yes
WESCOSA Saudi Arabia-DAMMAM Yes UP TO 13.8 KV ONLY

Total = 8

3 PAD MOUNTED GROUNDING TRANSFORMERS UP TO 2 MVA

3.1 13.8 KV, 33KV & 34.5 KV PRIMARY


3. 1. 1 GROUNDING TRANSFORMERS Applicable Standards: 52-TMSS-01

* --- Yes ALL APPROVED POWER TRANSFOREMER MANUFACTURERS,


EXCEPT DISTRIBUTION TRANSFORMER MANUFACTURERS ARE
ALSO ACCEPTABLE FOR GROUNDING TRANSFORMERS
ABB United States Yes
ABB Saudi Arabia-RIYADH Yes
ABB ( T& D) ITALY Yes
ABB SECHERON SWITZERLAND-GENEVA Yes
CG POWER SYSTEMS BELGIUM Yes
CROMPTON GREAVES INDIA Yes SUSPENDED FOR SEC 2005 PROJECTS AND ONWARD
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes

Page 18 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HYUNDAI KOREA, Republic of-Ulsan Yes

Total = 9

4 DRY TYPE TRANSFORMERS

4.1 36 KV PRIMARY
4. 1. 0 36 KV PRIMARY Applicable Standards:

ABB/AEIL Saudi Arabia Yes


SIEMENS GERMANY Yes
WESCOSA Saudi Arabia-DAMMAM Yes

Total = 3

5 COMPACT SUBSTATION

5.1 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY


5. 1. 1 UNIT SUBSTATION, 69KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY Applicable Standards:

ABB (BBC SECHERON) SWITZERLAND-GENEVA Yes


CG POWER SYSTEMS BELGIUM Yes

Total = 2

5.2 110-132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY


5. 2. 1 UNIT SUBSTATION, 110 - 132 KV PRIMARY, 13.8 KV OR 34.5 KV SECONDARY Applicable Standards:

ABB ( T& D) United States-N/A Yes

Total = 1

6 REACTOR

6.1 OIL IMMERSED REACTORS


6. 1. 1 33 KV TO 69 KV OIL IMMERSED REACTORS Applicable Standards: 58-TMSS-01

ABB SWEDEN Yes

Page 19 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ALSTOM Grid TURKEY-Gebze Yes Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
AREVA_(ST. QUEN) FRANCE-(ST. QUEN) Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HYUNDAI KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated
31/08/2010, it is pre-qualified for Shunt Reactor as confirming to
SEC specification # 58-TMSS-01, Rev.0 with the following
conditions:

All type/special, routine& sample tests for Shunt Reactors on


one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)
SEC engineers & one (1) SEC approved independent inspection
agency Inspector, all the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by HHI
Korea through letter # S370-1007-052 dated 05/07/2010.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SCHNEIDER ELECTRIC TURKEY-Kocaeli Yes Based on S&SD Letter 12-03420-30504401 dated October 02,
2012, Schneider Electric from Turkey-Kocaeli is pre-qualified for
Shunt Reactors up to 33kV only.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 11

6. 1. 2 110 KV TO 132 KV REACTORS Applicable Standards: 58-TMSS-01

ABB SWEDEN Yes

Page 20 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB ( T& D) United States-N/A Yes
ALSTOM Grid TURKEY-Gebze Yes Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
AREVA_(ST. QUEN) FRANCE-(ST. QUEN) Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HYUNDAI KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated
31/08/2010, it is pre-qualified for Shunt Reactor as confirming to
SEC specification # 58-TMSS-01, Rev.0 with the following
conditions:

All type/special, routine& sample tests for Shunt Reactors on


one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)
SEC engineers & one (1) SEC approved independent inspection
agency Inspector, all the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by HHI
Korea through letter # S370-1007-052 dated 05/07/2010.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 11

6. 1. 3 230 KV OIL IMMERSED REACTORS Applicable Standards: 58-TMSS-01

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes

Page 21 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ALSTOM Grid TURKEY-Gebze Yes Previously AREVA T&D-Turkey [The name has been changed
based on S&SD/P&SFD letter # 12-01064-30504401 dated
March 14, 2012].
AREVA_(ST. QUEN) FRANCE-(ST. QUEN) Yes
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HYUNDAI KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated
31/08/2010, it is pre-qualified for Shunt Reactor as confirming to
SEC specification # 58-TMSS-01, Rev.0 with the following
conditions:

All type/special, routine& sample tests for Shunt Reactors on


one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)
SEC engineers & one (1) SEC approved independent inspection
agency Inspector, all the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by HHI
Korea through letter # S370-1007-052 dated 05/07/2010.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 11

6. 1. 4 380 KV OIL IMMERSED REACTORS Applicable Standards: 58-TMSS-01

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
AREVA_(ST. QUEN) FRANCE-(ST. QUEN) Yes

Page 22 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HYUNDAI KOREA, Republic of-Ulsan Yes Based on TS&SD Letter # 10-02438-02-03032301 dated
31/08/2010, it is pre-qualified for Shunt Reactor as confirming to
SEC specification # 58-TMSS-01, Rev.0 with the following
conditions:

All type/special, routine& sample tests for Shunt Reactors on


one unit of each rating supplied to SEC shall be conducted at
Manufacturer's Testing Laboratory in the presence of three (3)
SEC engineers & one (1) SEC approved independent inspection
agency Inspector, all the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by HHI
Korea through letter # S370-1007-052 dated 05/07/2010.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or from the date
of first delivery of direct material supply order and subsequently
reduced yearly in case of future project award. This was
confirmed by HHI Korea through letter # S370-1008-0182
dated 18/08/2010.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SIEMENS AG (NURNBERG) GERMANY-NURNBERG Yes
SIEMENS TRANSFORMERS AUSTRIA GMBH & AUSTRIA- WEIZ Yes
CO KG
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 10

6.2 AIR CORE SERIES REACTOR


6. 2. 1 230 KV AIR CORE SERIES REACTORS Applicable Standards: 58-TMSS-02

* --- Yes ALL POWER TRANSFORMER AND OIL IMMERSED REACTOR


MANUFACTURERS ARE ACCEPTABLE TO SUPPLY AIR CORE
SERIES REACTORS FROM 13.8KV TO 230 KV

Page 23 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
TRENCH AUSTRIA GMBH AUSTRIA-Leonding, Linz Yes Based on TS&SD letter 10-01317-1-03032301 dated May 10,
2010. TRENCH AUSTRIA GMBH is pre-qualified for Air Core
Series Reactors as confirming to SEC Specification 58-TMSS-02,
Rev.0 with the following conditions:
Extended Warranty: Seven (7) years Extended Warranty shall
be applicable for the Air Core Series Reactors to be supplied to
SEC by TRENCH AUSTRIA GMBH as confirmed through their
letter # NIL dated April 28, 2010.
Test Witnessing: Factory Tests on the first batch of Reactors to
be supplied to Contract # 10931162/00 and Contract #
10931163/00 for Dynamic Reactive Power Compensation
Projects in Central Operating Area shall be conducted in
presence of three (3) SEC Engineers and one (1) IIA Inspector,
under the sole expense of the Manufacturer as confirmed
through their Letter Letter # NIL dated April 28, 2010.
TRENCH CANADA CANADA-Scarborough, Ontario Yes Based on TS&SD letter 10-01317-1-03032301 dated May 10,
2010. TRENCH CANADA is pre-qualified for Air Core Series
Reactors as confirming to SEC Specification 58-TMSS-02, Rev.0
with the following conditions:
Extended Warranty: Seven (7) years Extended Warranty shall
be applicable for the Air Core Series Reactors to be supplied to
SEC by TRENCH CANADA as confirmed through their letter # NIL
dated April 28, 2010.
Test Witnessing: Factory Tests on the first batch of Air Core
Series Reactors to be supplied to Contract # 20931030/00 for
Taif BSP & Kayber/Bawat S/S shall be conducted in presence of
three (3) SEC Engineers and one (1) IIA Inspector, under the
sole expense of the Manufacturer as confirmed through their
Letter # NIL dated April 27, 2010.
Free Replacement: TRENCH CANADA shall supply one
complete three phase set of Reactors (3 units) to SEC (Tabouk
City) free of charge as already confirmed through their letter #
NIL dated November 06, 2009.
Total = 3

6.3 AIR CORE REACTORS


6. 3. 1 230 KV AIR CORE REACTORS Applicable Standards: 52-TMSS-02,58-TMSS-02

ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes


Power Economy Middle East Co. United Arab Emirates-Abu Dhabi Yes Limited to 34.5kV Only; First unit of 34.5kV Air Core Reactor
shall be type tested in an independent lab. in the presence of 3
SEC Engineers & 1 SEC Approved Independent Inspection
Agency; 10 years of Extended Warranty.
Total = 2

Page 24 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
7 SWITCHGEARS

7.1 METAL CLAD SWITCHGEARS


7. 1. 1 13.8 KV UP TO 34.5 KV Applicable Standards: 32-TMSS-01

ABB ( T& D) United States-N/A Yes

Page 25 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB/AEIL Saudi Arabia Yes For 33kV AIS:
classic ZS3 type with current rating up to 2500A@ 40C; CB type
VD43620-25(2000A), VD43612-25(1250A & 800A); ES type EK5,
3007N280.

For 13.8kV AIS:


The remark was modified based on S&SD Letter
13-01329-30504401 dated March 13, 2013.

13.8kV switchgear type UniGear ZS1 (CT on upper & lower


side of CB) with rated current of incomer, Bus Section, Bus Riser
3003A and 1756A, Out Going Feeder with rated current 924A
and 682A @ 40C, 60Hz, 25kA (3s).

Out Going Feeder (CT on lower side of CB) with rated current
991A and 648A @ 40C, 60Hz, 25kA (3s).

CB types (VD4 embedded pole): VD4 17.31-25 (interrupter


VG6), ABB Italy and VD4 17.16-25 (interrupter VG4/S), VD4
17.12-25 (interrupter VG4) & VD4 17.06-25 (interrupter VG4),
ABB, Italy.

Circuit breaker for Capacitor bank back to back switching


(BC2-630A); VD4 17.12-40 (interrupter VG6), HD4 17.12-25
(interrupter SF6), HD4 24.12-25 (interrupter SF6), and (BC2-
900A); HD4 17.16-25 (interrupter SF6) ABB, Italy.

All VD4 Poles and Interrupters are from ABB Calor Emg,
Germany (DECMS).

EL Operating Mechanism form ABB-SACE Italy (ITABB).

Earthing switch type EK6, ABB-EJF, Czech.

CT & VT: ABB-EJF, Czech or WTW make, Germany

Old version: Classic ZS1.

Based on S&SD Letter 12-03120-01-30504401 dated August 14,


2012, 13.8kV UniGear ZS1 AIS is pre-qualified for current rating
3600/4000A @ 40C, 60Hz with forced cooling, with the
following dimensions of the panels:
Incomer (100017802595), VCB-VD4
1731-25,Interrupter-VG6
Bus section (100017802595), VCB-VD4
1731-25,Interrupter-VG6
Bus riser (80014002595)
ABB-CALOR EMAG GERMANY-CALOR EMAG Yes

Page 26 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
AEL -SIEMENS Saudi Arabia-JEDDAH Yes For 13.8kV AIS:
type 8BK20 with CB type 3AH.
for 33kV AIS:
type 8BT2 is not acceptable, as the VT is situated in a separate
compartment and connected by cable.
ALFANAR ELECTRICAL SYSTEMS Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-02613-01-03032301 dated 13th
September 2009, ALFANAR ELECTRICAL SYSTEMS from Saudi
Arabia-Riyadh for 13.8kV Switchgear type NES-H with degree
protection IP4X; vacuum CB (rating 3150A & 1250A) and ES
from LSIS (South Korea) - details of types are mentioned in the
TS&SD letter; as confirming to SEC specification # 32-TMSS-01,
rev.0 with the following condition:
Ten (10) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.

Based on S&SD Letter 11-01668-03032301 dated June 01,


2011, 13.8kV NES-H AIS is pre-qualified for current rating 4000A
@ 40C, 60Hz with forced cooling and 2906A @ 40C, 60Hz with
natural cooling with busbar dimension 3x100x10mm and with
the following dimensions of the panels:
Incomer (100018802793),
VCB-LVB-17M-40D/301E2H, Interrupter-10403
Bus section (100018802793),
VCB-LVB-17M-40D/301E2H, Interrupter-10403
Bus riser (100018802793)
AREVA (MACON CEDEX 9) FRANCE-(MACON CEDEX 9) Yes
EFACEC PORTUGAL Yes
ELEKTROBUDOWA SA Poland-Konin Yes based on TS&SD letter# 09-01092-03032301 dated 18th. April
2009 it is prequalified for for 13.8kV Air Insulated Switchgear
type D-17P with SCC of 25kA/3sec, degree of protection IP4X
and rated current of 3000A @ 40oC, 60Hz; CB type VD4 which
approved by SEC from ABB-Germany (3000A) & ABB-Italy
(2500A); ES type UMR from ELECTROBUDOWA SA-Poland as
confirming to SEC specification # 32-TMSS-01, rev.0 with Ten
(10) years warranty from the date of PAC of the Turnkey
project in case of contract award or date of delivery in case of
direct material supply order.

Page 27 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
EPS LTD. (GROUPE SCHNEIDER) Saudi Arabia-RIYADH Yes For 13.8kV AIS:
Pre-qualified since 24/02/1420H for 13.8kV SWG type MC-Set
with CB type LF3-3150-(2500A), LF2- 2500 (2000A), LF2-1250
(800A), LF2-630 (400A) and warranty of (7)years from
commissioning date of the first delivery for any onward project
or order in the first two years and then shall be (3)years from
PAC.

Based on S&SD Letter 12-02860-01-30504401 dated July 24,


2012, 13.8kV MC-Set AIS is pre-qualified for current rating
3600A @ 40C, 60Hz with forced cooling, with the following
dimensions of the panels:
Incomer (90017002500), CB-LF3,
Interrupter-LF3-3150A
Bus section (90017002500), CB-LF3,
Interrupter-LF3-3150A
Bus riser (90017002500)

For 33kV AIS:


Based on TS&SD fax ref. #09-00073-2-03032301 dated
04/02/2009. Pre-Qualified for 34.5 kV SWG type
(F400NL)1250/2500 A @40C &60Hz with IP4X,SF6 CB type
SF2(France),ES type TFCM(France), & (10)years warranty.

Old version:
33kV AIS type F400G with current rating up to 2500A @ 40C
with CB type SF & SF2
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
KONCAR Croatia/Hrvatska Yes LIMITED TO DTA ONLY; FOR CTA PREQUALIFICATION UNDER
PROGRESS
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
POWER CON United States Yes SWITCHGEAR NOT YET TYPE TESTED
S&C United States Yes
SIEMENS United States Yes
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
VA TECH FRANCE Yes
WESCOSA Saudi Arabia-DAMMAM Yes

Page 28 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 19

7. 1. 2 110 KV TO 132 KV GIS Applicable Standards: 32-TMSS-02

ABB GERMANY Yes Old Version:


145kV GIS type ELK-04 with CB type ELK-SW04, Hydraulic
spring mechanism; DS type ELK-TE0 (3 POS), MES type ELK-TE0
(3 POS)/ TE03-DR04; HES type ELK-EB03.

New Version:
Based on TS&SD letter # 11-00455-5-03032301 dated April 04,
2011, the new version 145kV GIS type ELK-04 with CB type
ELK-CB0 (Hydraulic Spring Mech. HMB-1), DS type
ELK-DE0-3POS, MES type ELK-DE0, HSES type ELK-ES0 (Motor
Spring Mech.) is pre-qualified as conforming to SEC specification
# 32-TMSS-02, Rev.01 with the following condition:
Ten (10) Years Extended Guarantee/Warranty from the date of
PAC of project (in case of contract award) and from date of
delivery for the direct material supply order. This was confirmed
in writing by ABB Germany via their letter # PTPH/GVS.Nb,
10_year-warranty.doc dated May 14, 2010.
ABB SWITZERLAND Yes
ALSTOM Grid AG SWITZERLAND-Oberentfelden Yes New version:
Based on S&SD letter# 13-4433-01-30504401, dated 16 January
2013, it is pre-qualified for 145kV GIS type F35 with rated
current, 3150A @40C, 60Hz, CB type- F35-CB4 / Opr. Mech:
FK3-2 (spring charged), Line & Busbar DS-F35-DES-4/ Opr.
Mech: ME1-3, MES-F35-DES-4/ Opr. Mech: ME1-3,
HES-F35-EFZ/Opr. Mech:MF-3 (spring charged), CT-F35-CT4,
against specification # 32-TMSS-02, Rev.1 with the following
condition:

1. Eight (8) years extended warranty from the date of PAC of


the first turnkey project (in case of contract award) or from the
date of first delivery of direct material supply order. This was
confirmed through manufacturer lletter ref: Q1F35_210409
dated 21 April 2009.

Old Version:
145kV GIS type B65 with CB type B65-CB Motor spring
mechanism; DS type B65-DS; ES type B65-ES; HES type B65-EF.

Previously " Areva T &D AG, SWITZERLAND-Oberentfelden ", the


name has been changed to ALSTOM Grid AG, Oberentfelden,
Switzerland, based on ALSTOM Grid Letter # Nil dated July 11,
2012.

Page 29 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

Old version:
145kV GIS type SDA5 (SDA514) with CB type BAK5, Hydraulic
mechanism.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

New version: 145kV GIS type CFTA with CB type CFPT-120-40L,


FAR3 Motor spring mechanism; DS type CFL-120; ES type
CFL-120.
Old version: 145kV GIS type CFT with CB type CFPT-140-40L,
FAR3,C Pneumatic mechanism; DS type SFL-EA; HES type
SFGM-FA.
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes New Model approved on 10-04-2007, Model Type HSG-144A
145KV GIS with CB type HCSP-144A
Motor spring mechanism; DS type HDMO-144A; MES type
HDMO-144A, HES type HEMS-144A.
All Type and Design tests have been carried out completely &
accepted as mentioned in TS&SD letter#08-F02926-03032301
dated 22/11/2008.
Provide extended Guarantee/Warranty for Seven(7) Years from
the date of PAC
Old version: 145kV GIS type 145HGS40 with CB type
145HCB,145PL40; DS type 145SDSV/SDSH; MES type 145SESM;
HES type 145SESA
HYUNDAI KOREA, Republic of-Ulsan Yes New version: 145kV GIS type 145SP-1 with CB type 145SP-K1
Motor spring mechanism; BDS type 145SP-3PS1; LDS type
145SP-3PS2; MES type 145-3PS2; HES type 145SP-LES2.
Old version: 145kV GIS type 145SP with CB type 145SP-K
Hydraulic mechanism; DS type 145SP-DS; MES type 145SP-ES;
HES type 145SP-LES
KONCAR Croatia/Hrvatska Yes GIS & ADAPTORS; LIMITED TO DTA ONLY; FOR CTA
PREQUALIFICATION UNDER PROGRESS
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
New version 145kV GIS type 100GMKD with CB type
120-SFMT-40CJ; DS type 120GRD/GLD; MES type
120GRED/GRE; HES type 120 GRED/GRE-A.
Old version: 145kV GIS 120GMKM with CB type 120-SFMT-40,
Pneumatic mechanism; DS type 120-GR-20,
120-GL-20; MES type 120-GRE, 120-GREC; HES type 120-GREA.
Old version: 145kV GIS 100GMKD with CB type 120-SFMT-40CE
Motor spring mechanism; DS type 120GLD; HES type 120-GREA.

Page 30 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SIEMENS FRANCE-GRENOBLE Yes New version:
145kV GIS type TH7m with CB type TH7m AF8ER(Motor spring);
BDS type CM002, CM003 (3-position); LDS type CM002, CM003
(2-position); MES type CM002,CM003; HES type CM002, CM003.
Old version: 145kV GIS type HEXABOLIC-TH7 with CB type
DTH7 Hydraulic mechanism; BDS type SITH7; LDS type ITH7, SI
TH7; ES type ST TH7.
SIEMENS GERMANY Yes New version: 145kV GIS type 8DN8-II with CB type 8DN8 Motor
spring mechanism; DS type 8DN8; ES type 8DN8.
Old version: 145kV GIS type 8DN8 with CB type 8DN6(P1) Motor
spring mechanism; DS type 8DN8; ES type 8DN8.
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
145kV GIS type with CB type GSPK-145AP; BDS type
KTM-120PW, DTM-120PW, DLM-120PW; LDS type KTM-120PW,
DTM-120PW; MES type EBM-120W; HES type EAP-120W.
Total = 12

7. 1. 3 230 KV -GIS Applicable Standards: 32-TMSS-02

ABB SWITZERLAND Yes 230kV GIS type ELK SP2-1 with CB type ELK SP2-1; BDS type
ELK-TE/ ELK-TW/ELK-TV; MES type ELK EM/ELK-EA; HES type
ELK EB.
ALSTOM Grid SAS FRANCE-AIX-LES BAINS Yes 230kV GIS type B105 with CB type B105-CB; DS type CLT

Previously "AREVA T&D FRANCE-(AIX-LES BAINS) ", the name


has been changed to ALSTOM Grid SAS-France based on
ALSTOM Grid-France letter # Nil, dated December 07, 2012.
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

230kV GIS type MFPT MFPTB-300-63L with CB type


MFPTB-300-63LA, HAR/MFTB-300-563L; BDS type FL-EA, LDS
type FMG-FA/FG.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Page 31 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SIEMENS GERMANY-Berlin Yes Old Version
230kV GIS type 8DN40-8DN4 with CB 8DN401-8DN4; BDS
type 8DN4-8DQ1; LDS type 8DP4; MES type 8DN4; HES type
8DP4.

Based on SIEMENS letter# 30179023-A1 dated


02/05/2011, this type is already obsolete/phased out.

New Version
Based on TS&SD letter # 11-00267/01-03032301 dated
02/02/2011, it is pre-qualified for 300kV GIS type 8DN9, rated
current 4000A, short time current rating of 63kA, CB (Single
Break) type 8DN9-300-63-4000 with motor spring mechanism,
Busbar & line DS type 8DN9-300-63-4000 with motor drive
mechanism, MES type 8DN9-300-63-with motor drive
mechanism & HES type 8DN9-300-63-4000 with motor drive
mechanism as confirming to SEC specification #
32-TMSS-02,Rev.01, with the following conditions:

Ten (10) years extended warranty starting from project


"Safaniyah 380/230kV project" as confirmed through SIEMENS
letter # PQ_8DN9_02 dated 26/06/2010.

This GIS shall only be used for 245kV, 63kA applications.


SIEMENS FRANCE-GRENOBLE Yes
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 8

7. 1. 4 380 KV - GIS Applicable Standards: 32-TMSS-02

ABB SWITZERLAND Yes 420kV GIS type ELK-03 with CB type ELKSP-3 DOUBLE BREAK,
Spring Hydraulic Charged mechanism, BDS type ELKT, LDS type
ELKT, MES type ELK EM3, MES type ELK EB3
ALSTOM Grid SAS FRANCE-AIX-LES BAINS Yes 420kV GIS type T155 with CB type FB2T (Hydrolic Mech.)

Previously "AREVA T&D FRANCE-(AIX-LES BAINS) ", the name


has been changed to ALSTOM Grid SAS-France based on
ALSTOM Grid-France letter # Nil, dated December 07, 2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.

420kV GIS type 1FT

Page 32 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HYOSUNG (HICO) KOREA, Republic of-Changwon Yes Based on TS&SD letter # 10-F-02299/02-03032301 dated
25/10/2010, it is pre-qualified for 420kV GIS type HSG 426A,
63kA, CB (Single Break) type HCHY 426A with Hydraulic
Mechanism, Busbar DS type HDMO 426A, Line DS type HDMO
426B,ES type HEMO 426A&H-ES type HEMS 426A as
confirming to SEC specification # 32-TMSS-02,Rev.01, with the
following conditions:

Supply one complete spare bay" free of charge" (for not


repeating the short circuit test of circuit breaker type HCHY
426A) on the first supply of 420kV GIS type HSG 426A to SEC.
This was confirmed in writing by Hyosung Corp (Korea) through
letter #Nil dated 28th December 2009.

Repeat/carry out the temperature rise test at 55C (it was


carried out before at 50C) of the main circuit on the first supply
of the 420kV GIS type HSG 426A to SEC. This was confirmed in
writing by Hyosung Corp (Korea) through letter #HS-420GIS-
100830-1 dated 30th August 2010.

Back to back switching tests for the capacitor bank shall be


conducted in an independent test laboratory whenever there is
project requirement. This was confirmed in writing by Hyosung
Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th
August 2010.

Ten (10) years extended warranty for the proposed 420kV


GIS type HSG 426A from the date of PAC of the turnkey project
in case of contract award or date of delivery in case of direct
material supply order. This was confirmed in writing by Hyosung
Corp (Korea) through letter #HS-420GIS-100830-1 dated 30th
August 2010.
HYUNDAI KOREA, Republic of-Ulsan Yes 420 kV; 63kA; TYPE-550 SR; CB-550 SR-K (Single Break);
DS-550 DRM 1&2; ES-550 ERM; HES-550 LES; back to back
capacitor switching test for C.B. shall be done in independent
laboratory iin the presence of SEC Engineers whenever there is a
requirment for this test iin th PTS of forthcoming SEC projects.
- 10 Years extended warranty.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SIEMENS FRANCE-GRENOBLE Yes 420kV GIS type YGII with CB type SPD; DS ype YGII
SIEMENS United Kingdom-HEBBUM Yes

Page 33 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SIEMENS GERMANY Yes New version: 550kV GIS typ 8DQ1 with CB type 8dQ1-P2; DS
type 8DQ1; ES type 8DQ1. with ten (10) years extended
warranty from the date of Provisional Acceptance Certificate
(PAC) of the Turnkey project (In case of contract award) and
from the date of delivery for the direct material supply order.
The guarantee/warranty shall cover all the cost of materials and
labor as per warranty/guarantee of materials and workmanship
and subsequently reduced yearly in case of future project award.
old version: 420kV GIS type 8DQ1 with CB type 8DQ1-T2,
DOUBLE BREAK, Hydraulic mechanism; DS type 8QD1
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
Old virsion: 420kV GIS type GID with CB type GSR
400R2B/GSRK, DOUBLE BREAK, Hydraulic mechanism.
Total = 10

7. 1. 5 33 KV GIS Applicable Standards:

SIEMENS GERMANY Yes Based on TS&SD Letter # 10-02461-02-03032301 dated


31/08/2010, it is pre-qualified for 36kV GIS type 8DA10,rated
current 2375A @ 40C, 60Hz and short time current rating of
25kA(3sec), CB type 3AH with interrupter type VS 30040 (40kA)
as confirming to SEC specification # 32-TMSS-03, Rev.0 with the
following conditions:

Capacitor bank back to back switching tests in case of non


availability of test report shall be conducted in an independent
testing laboratory in the presence of three (3) SEC engineers &
one (1) SEC approved independent inspection agency Inspector,
all the related costs for witnessing the tests will be borne by the
manufacturer, in case there is a need of capacitor bank
application. This was confirmed by Siemens through letter #
8DA10_PQR_R1 dated 25/08/2010.

Seven (7) years extended warranty for the proposed 36kV GIS
,type 8DA10 from the date of PAC of the turnkey project in case
of contract award or date of delivery in case of direct material
supply order. This was confirmed by Siemens trough letter #
8DA10_PQR_R1 dated 25/08/2010.
Total = 1

8 BATTERY EQUIPMENT

8.1 BATTERY LEAD ACID


8. 1. 0 BATTERY LEAD ACID Applicable Standards: 46-TMSS-01

Page 34 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
BAE BERLINER BATTERIE FABRIK- G GERMANY Yes
C&D United States Yes
CEAC FRANCE Yes
ENERSYS S.A.R.L. FRANCE-- Yes PREVIOUSLY KNOWN AS HAWKER S.A.R.L - FRANCE; FIVE
YEARS OF EXTENDED WARRANTY
EXIDE United States Yes
FIAMM ITALY Yes
GOULD (GNB) United States Yes
HOPPECKE GERMANY Yes
TOVARNA AKUMULATORSKIH BATERIJ SLOVENIA Yes
TUNGSTONE (HAWKER TUNGSTONE) United Kingdom Yes
VARTA GERMANY Yes
YUASA JAPAN Yes

Total = 12

8.2 BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA)


8. 2. 0 BATTERY LEAD ACID, VALVE REGULATED LEAD ACID (VRLA) Applicable Standards: 46-TMSS-04

AEG Power Solutions SAS FRANCE-- Yes originally was SAFT Power System SAS-France
C&D United States Yes
CHLORIDE (HAWKER CHLORIDE) United Kingdom Yes
FIAMM ITALY Yes
GNB United States Yes
HAWKER LTD. United Kingdom Yes
HOPPECKE GERMANY Yes
SAB GERMANY Yes
SEC United States Yes
VARTA GERMANY Yes
YUASA EXIDE United States Yes

Total = 11

8.3 BATTERY NICKEL CADMIUM (NiCD)

Page 35 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
8. 3. 0 BATTERY NICKEL CADMIUM (NiCD) Applicable Standards: 46-TMSS-06

ALCAD SWEDEN Yes


CHLORIDE FRANCE Yes
EMISA SPAIN Yes
EXIDE United States Yes
FRIWO GERMANY Yes MERGED WITH SAFT NIFE -SWEDEN
GAZ Gerate- und Akkumulatorenwerk Zwickau GERMANY-Zwickau Yes Based on TS&SD fax ref.#08-F02675/03-03032301 dated
GmbH 10/01/2009. Pre-Qualified for Nicd Battery with this conditions:
-First batch shall be type tested in Independent Laboratory iin
presence of (3) SEC engineers & (1) independent inspector.
-(07) years warranty
GNB United States Yes
SAFT-NIFE SWEDEN Yes 370 TO 1390AH
VARTA HAWKER GERMANY Yes

Total = 9

8.4 BATTERY CHARGER


8. 4. 1 BATTERY CHARGER Applicable Standards: 46-TMSS-02

AEES FRANCE Yes


AEG Power Solutions SAS FRANCE-- Yes Originally was SAFT Power System SAS-France
BENNING FRANCE Yes
Benning Elektrotechnik & Elektronik GmbH & GERMANY-- Yes Previously "Theo-Benning-Germany", the name has been
Co.kG. changed to Benning Elektrotechnik & Elektronik GmbH & Co. KG
-Germany based on TS&SD/ESD letter # 11-00334-03032301
dated 30/01/2011.

Page 36 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
BRAGA MORO ITALY Yes Based on S&SD Letter 12-03794-01-30504401 dated November
18, 2012, Braga Moro- Italy is pre-qualified for Battery Chargers
125V DC as conforming to National Grid SA Specification #
46-TMSS-02, Rev.0, with the following conditions:

All Type, Routine and Special testes as per National Grid SA


Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of Battery
Chargers 125V DC in an Independent Testing Laboratory in the
presence of three (3) SEC/National Grid SA Engineers & one (1)
SEC/National Grid SA approved Independent Inspection Agency
(IIA) Inspector. All costs of which shall be borne by Braga
Moro-Italy. This was confirmed in writing by Braga Moro-Italy
through their letter # SEC Prequalification dated April 13, 2011.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Braga Moro- Italy through their letter # SEC Prequalification
dated April 13, 2011.
C&D United States Yes
CEG ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.
May 2009 as confirming to SEC specifications # 46-TMSS-02,
rev.0 ; with the following conditions:
All tests shall be carried out on the first batch of Battery
Charger or UPS to be supplied to SEC in securing an order in the
manufacturer's testing laboratory in the presence of three (3)
SEC engineers & one (1) approved independent inspection
agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
CHLORIDE FRANCE Yes
EMISA (ELECTRO MERCANTIL INDUSTRIAL SPAIN Yes
S.A. SPAIN)
ERSKINE United Kingdom Yes
EXIDE United States Yes
GUTOR ELECTRONIC LTD. SWITZERLAND Yes

Page 37 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
JESUS MARIA AGUIRRE SA (JEMA) SPAIN-Lasarte-Oria Yes Based on S&SD Letter 12-00193-030504001 dated January 17,
2012. It is prequalified for Battery Charger as conforming to SEC
Specification# 46-TMSS-02, Rev.0 with the following conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of each types of Battery Chargers in an Independent
Testing Laboratory in the presence of three (3) SEC Engineers &
one (1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated June 17, 2011.

Ten (10) years extended warranty from the date of PAC of the
FIRST turnkey project in case of contract award or date of FIRST
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 17, 2011.
Statron AG SWITZERLAND-Maegenwil Yes Based on S&SD Letter 12-03254-01-30504401 dated August 29,
2012, it is pre-qualified for Battery Chargers 125V DC (Models
BDT) as conforming to SEC Specification # 46-TMSS-02, Rev.0
with the following conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of each types of Battery Chargers 125V DC in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer Statron AG through their letter # bm dated August
13, 2012.

Ten (10) years extended warranty in respect of defects due to


design, manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.
Total = 14

8. 4. 2 UPS, 5 THROUGH 100KVA Applicable Standards: 46-TMSS-03

Page 38 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
BRAGA MORO ITALY Yes Based on S&SD Letter 12-03794-01-30504401 dated November
18, 2012, Braga Moro- Italy is pre-qualified for UPS as
conforming to National Grid SA Specification # 46-TMSS-03,
Rev.0, with the following conditions:

All Type, Routine and Special testes as per National Grid SA


Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of UPS in an
Independent Testing Laboratory in the presence of three (3)
SEC/National Grid SA Engineers & one (1) SEC/National Grid SA
approved Independent Inspection Agency (IIA) Inspector. All
costs of which shall be borne by Braga Moro-Italy. This was
confirmed in writing by Braga Moro-Italy through their letter #
SEC Prequalification dated April 13, 2011.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Braga Moro- Italy through their letter # SEC Prequalification
dated April 13, 2011.
CEG ITALY-BIBIENA Yes Based on TS&SD letter# 09-F001363/02-03032301 dated 2nd.
May 2009 as confirming to SEC specifications # 46-TMSS-03,
rev.0 ; with the following conditions:
All tests shall be carried out on the first batch of Battery
Charger or UPS to be supplied to SEC in securing an order in the
manufacturer's testing laboratory in the presence of three (3)
SEC engineers & one (1) approved independent inspection
agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
GUTOR ELECTRONIC LTD. SWITZERLAND Yes

Page 39 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
JESUS MARIA AGUIRRE SA (JEMA) SPAIN-Lasarte-Oria Yes Based on S&SD Letter 12-00193-030504001 dated January 17,
2012. It is prequalified for UPS up to 100kVA as conforming to
SEC Specification# 46-TMSS-03, Rev.0 with the following
conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of each types of UPS up to 100kVA in an Independent
Testing Laboratory in the presence of three (3) SEC Engineers &
one (1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated June 17, 2011.

Ten (10) years extended warranty from the date of PAC of the
FIRST turnkey project in case of contract award or date of FIRST
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 17, 2011.
Statron AG SWITZERLAND-Maegenwil Yes Based on S&SD Letter 12-03254-01-30504401 dated August 29,
2012, it is pre-qualified for UPS (S2000 series) as conforming to
SEC Specification # 46-TMSS-03, Rev.0 with the following
conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of each types of UPS in an Independent Testing
Laboratory in the presence of three (3) SEC Engineers & one (1)
SEC approved Independent Inspection Agency (IIA) Inspector.
All costs of which shall be borne by the manufacturer. This was
confirmed in writing by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.

Ten (10) years extended warranty in respect of defects due to


design, manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.
Total = 5

8. 4. 3 BATTERY CHARGER, 48 VDC Applicable Standards: 46-TMSS-02,46-TMSS-05

AEES FRANCE Yes ACCEPTABLE FOR APPLICATIONS OTHER THAN TELECOM


AEG Power Solutions SAS FRANCE-- Yes originally was SAFT Power System SAS-France
BENNING FRANCE Yes

Page 40 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
BRAGA MORO ITALY Yes I. Prequalified for BATTERY CHARGER, 48 VDC (For Telecom
Applications).

II. Prequalified for DC-DC Converters, 48 Volts based on S&SD


Letter 12-03794-01-30504401 dated November 18, 2012 as
conforming to National Grid SA Specification # 46-TMSS-07,
Rev.0 with the following conditions:

All Type, Routine and Special testes as per National Grid SA


Specifications/Standards together shall be carried out on the
First unit to be supplied to SEC/National Grid SA of DC-DC
Converters, 48 Volts Output in an Independent Testing
Laboratory in the presence of three (3) SEC/National Grid SA
Engineers & one (1) SEC/National Grid SA approved
Independent Inspection Agency (IIA) Inspector. All costs of
which shall be borne by Braga Moro-Italy. This was confirmed in
writing by Braga Moro-Italy through their letter # SEC
Prequalification dated April 13, 2011.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Braga Moro-Italy through their letter # SEC Prequalification
dated April 13, 2011.
CHLORIDE FRANCE Yes
COM 10 INTERNATIONAL PTY. LTD. AUSTRALIA-ALPHA Yes SWITCH MODE RECTIFIERS / BATTERY CHARGERS ONLY FOR
TELECOM APPLICATION.
EMISA (ELECTRO MERCANTIL INDUSTRIAL SPAIN Yes
S.A. SPAIN)
ERSKINE United Kingdom Yes Based on TS&SD letter# 09-F02210/03-03032301 dated 1st .
September 2009, ERSKIN System Ltd. (a division of Dale Power
Solution plc) from United Kingdom-Scarborough for 48V DC
battery Charger as confirming to SEC specification #
46-TMSS-05, rev.0 with the following conditions:
All type, design, special & routine tests as per SEC
specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the manufacturer's
laboratory in the presence of three (3) SEC engineers & one (1)
approved independent inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
EXIDE United States Yes SCR TYPE ONLY
HAMMER & SIMMONS United Kingdom Yes .

Page 41 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Statron AG SWITZERLAND-Maegenwil Yes Based on S&SD Letter 12-03254-01-30504401 dated August 29,
2012, it is pre-qualified for Battery Chargers 48V DC (Models
BDT and MPS) as conforming to SEC Specification #
46-TMSS-02, Rev.0 & 46-TMSS-05, Rev.0, with the following
conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of each types of Battery Chargers 48V DC in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer Statron AG through their letter # bm dated August
13, 2012.

Ten (10) years extended warranty in respect of defects due to


design, manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by the manufacturer Statron AG through
their letter # bm dated August 13, 2012.
T.D.I United States Yes SWITCH MODE RECTIFIERS ONLY FOR TELECOM
APPLICATIONS
Total = 12

9 LV DISTRIBUTION PANELS

9.1 AC & DC DIST. PANELS


9. 1. 0 AC & DC DIST. PANELS Applicable Standards: 31-TMSS-02

ABB/AEIL Saudi Arabia Yes


ALFANAR ELECTRICAL SYSTEMS Saudi Arabia-RIYADH Yes
EAST & WEST FACTORY Saudi Arabia-DAMMAM Yes
ELECTRICAL PANEL BOARD FACTORY/HAWA Saudi Arabia-DAMMAM Yes
TRADING
EPS LTD. (GROUPE SCHNEIDER) Saudi Arabia-RIYADH Yes
ETA-PCS United Arab Emirates-DUBAI Yes Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.

Page 42 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
MEMF-ETA Switchgear Manufacturing Company Saudi Arabia-Riyadh Yes Based on TS&SD letter #11-F03210/01-03032301 dated
29/11/2011, it is pre-qualified for AC&DC Panels as confirming to
SEC specification # 31-TMSS-02, Rev.0 with the following
conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first batch of
AC&DC Panels to be supplied to SEC in case of securing an order
in the presence of three (3) SEC Engineers & one (1) approved
independent inspection agency Inspector in an independent
testing laboratory. All the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by
MEMF-ETA Switchgear Manufacturing Company through letter #
Nil dated 14/02/2011.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
MEMF-ETA Switchgear Manufacturing Company through letter #
Nil dated 08/12/2010.
MOHAMMAD AL OJAIMI FACTORY Saudi Arabia-RIYADH Yes
MUSAID SWITCHGEAR Saudi Arabia-RIYADH Yes
REMAL Saudi Arabia-DAMMAM Yes
SIEMENS Saudi Arabia-JEDDAH Yes
Waha Electric Supply Co. of Saudi Arabia- Saudi Arabia-Dammam Yes Based on TS&SD Letter # 11-01751/01-03032301 dated
(WESCOSA)-Dammam 27/06/2011, it is pre-qualified for Auxiliary AC & DC Panels up to
132kV only as confirming to SEC specification # 31-TMSS-02,
Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first batch of
each type of Auxiliary AC&DC Panels to be supplied to SEC in
case of securing an order in the presence of three (3) SEC
engineers & one (1) approved independent inspection agency
Inspector in an independent testing laboratory. All the related
costs for witnessing the tests will be borne by the manufacturer.
This was confirmed by WESCOSA-Dammam through letter # Nil
dated 18/05/2010.

Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
WESCOSA-Dammam through letter # Nil dated 30/08/2010.
Total = 12

10 LOAD BREAK SWITCHES UPTO 34.5 KV & RING MAIN UNITS, 15 KV

Page 43 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

10 . 1 LOAD BREAK SWITCHES UPTO 34.5 KV


10. 1. 0 LOAD BREAK SWITCHES UPTO 34.5 KV Applicable Standards:

ABB/AEIL Saudi Arabia Yes


AREVA FRANCE Yes
EPS LTD. (GROUPE SCHNEIDER) Saudi Arabia-RIYADH Yes
FRITZ DRIESCHER GERMANY Yes
HITACHI JAPAN Yes
KONCAR Croatia/Hrvatska Yes
SIEMENS GERMANY Yes

Total = 7

10 . 2 RMU, 15 KV
10. 2. 0 RMU, 15 KV Applicable Standards: 32-TMSS-07

ABB Saudi Arabia-RIYADH Yes


AREVA FRANCE Yes
EPS LTD. (GROUPE SCHNEIDER) Saudi Arabia-RIYADH Yes
FRITZ DRIESHER KG GERMANY Yes
GULF REYROLLE LTD Saudi Arabia-DAMMAM Yes
MERLIN GERIN FRANCE Yes
SAUDI LUCY Saudi Arabia-AL KHOBAR Yes
SIEMENS AG EVM GERMANY-FRANKFURT Yes
THE INTERNATIONAL ELECTRICAL PRODUCTS Saudi Arabia-DAMMAM Yes
CO.
W. LUCY United Kingdom Yes

Total = 10

10 . 3 SPARE PARTS FOR RMU & EOS


10. 3. 0 SPARE PARTS FOR RMU & EOS Applicable Standards:

CELLMEC BAHRAIN Yes

Page 44 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 1

11 NEUTRAL EARTHING RESISTORS UP TO 33 KV

11 . 1 NER, UP TO 33 KV
11. 1. 0 NER, UP TO 33 KV Applicable Standards: 57-TMSS-01

CRESSAL RESISTOR United Kingdom Yes


FURSE United Kingdom Yes
M.S.Resistances FRANCE-- Yes EXTENDED GUARANTEE / WARRANTY FOR 10 YEARS
METAL DEPLOYE FRANCE Yes
NATIONAL INDIA Yes

Total = 5

12 BARE CONDUCTORS

12 . 1 TYPE ACAR / ACSR / AAAC


12. 1. 1 BARE CONDUCTOR, ACAR / ACSR / AAAC Applicable Standards: 10-TMSS-01

ALCOA United States Yes


APAR Industries Ltd-NALAGARH INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

Page 45 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
APAR Industries Ltd-SILVASSA INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01
with the following conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.
MIDAL CABLE LTD. BAHRAIN-MANAMA Yes
OMAN CABLE INDUSTRIES MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN
INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.
STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST
SHALL BE BORNE BY THE MANUFACTURER.10 YEARS
EXTENDED WARRANTY.
RIYADH CABLES Saudi Arabia-RIYADH Yes
SAUDI CABLE Saudi Arabia-JEDDAH Yes
SOUTHWIRE United States Yes
STERLITE (INDIA) INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated June
19, 2010 and S&SD Letter 12-02686-1-30504401 dated July 23,
2012, it is pre-qualified for Bare Conductors types (ACAR, ACSR
& AAAC) as confirming to SEC Specification # 10-TMSS-01,
Rev.01 with the following condition:

ACAR, ACSR & AAAC conductors were successfully type tested


in accredited laboratory in the presence of SEC Engineers with
acceptable results.

Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first delivery
in case of direct material supply order.
Total = 9

12 . 2 TYPE ACSR/AW

Page 46 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
12. 2. 1 BARE CONDUCTOR, ACSR/AW Applicable Standards: 10-TMSS-01

ALCOA United States Yes


APAR Industries Ltd-NALAGARH INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.
APAR Industries Ltd-SILVASSA INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Bar Conductors as confirming
to SEC specification # 10-TMSS-01, Rev.01 with the following
conditions:

The first batch of each type of conductors to be supplied to


SEC shall be type tested in an independent accredited test
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.
This has been confirmed in writing by the manufacturer, through
letter # AIL/BRD/PQ/SEC/19 dated 22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer; through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.
JEDDAH CABLE CO. Saudi Arabia-JEDDAH Yes
MIDAL CABLE LTD. BAHRAIN-MANAMA Yes
OMAN CABLE INDUSTRIES MUSCAT-- Yes FIRST LOT OF EACH TYPE SHALL BE TYPE TESTED IN AN
INDEPENDENT LABORATORY PER 10-TMSS-01 & OTHER INTL.
STANDARDS, IN PRESENCE OF SEC ENGINEERS AND ALL COST
SHALL BE BORNE BY THE MANUFACTURER.10 YEARS
EXTENDED WARRANTY.

Page 47 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
RIYADH CABLES Saudi Arabia-RIYADH Yes
SAUDI CABLE Saudi Arabia-JEDDAH Yes
SOUTHWIRE United States Yes
STERLITE (INDIA) INDIA-- Yes Based on TS&SD Letter # 10-F001691/01-03032301 dated
19/06/2010, it is pre-qualified for Bare Conductors type
(ACSR/AW) as confirming to SEC specification # 10-TMSS-01
Rev.01 with the following condition:

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order.
Total = 10

12 . 3 GROUND WIRE
12. 3. 1 GROUND WIRE Applicable Standards: 10-TMSS-03

ALCOA United States Yes


APAR Industries Ltd-NALAGARH INDIA-NALAGARH Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)
of Aluminum Clad Steel (ACS) Type only as confirming to SEC
specification # 10-TMSS-03, Rev.0 with the following conditions:

The first batch of Aluminum Clad Steel (ACS) type to be


supplied to SEC shall be type tested in an independent
accredited test laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by the manufacturer. This has been confirmed in writing
by the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated
22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.

Page 48 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
APAR Industries Ltd-SILVASSA INDIA-SILVASSA Yes Based on TS&SD Letter # 10-01566-2-03032300 dated
14/06/2010, it is pre-qualified for Overhead Ground Wire (OGW)
of Aluminum Clad Steel (ACS) Type only as confirming to SEC
specification # 10-TMSS-03, Rev.0 with the following conditions:

The first batch of Aluminum Clad Steel (ACS) type to be


supplied to SEC shall be type tested in an independent
accredited test laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by the manufacturer. This has been confirmed in writing
by the manufacturer through letter # AIL/BRD/PQ/SEC/19 dated
22nd May 2010.

Ten (10) years warranty from the date of PAC of the


turnkey project in case of contract award or date of delivery in
case of direct material supply order. This has been confirmed in
writing by the manufacturer through letter # AIL/BRD/
SEC/PQ/19 dated 22nd May 2010.
ECN CG SA SPAIN Yes
J-POWER SYSTEM CORP. JAPAN Yes
MIDAL CABLE LTD. BAHRAIN-MANAMA Yes
RIYADH CABLES Saudi Arabia-RIYADH Yes
SAUDI CABLE Saudi Arabia-JEDDAH Yes
SOUTHWIRE United States Yes
TREFILEUROPE FRANCE Yes

Total = 10

12 . 4 COPPER CLAD, STEEL GROUNDING CONDUCTOR & GROUNDING ROD


12. 4. 1 COPPER CLAD STEEL GROUNDING CONDUCTOR AND GROUNDING ROD Applicable Standards: 10-TMSS-05

ComScope Bimetals USA United States-Statesville, NC Yes


FM Sudafix United Kingdom-Nottingham Yes Including Exothermic Welding and Grounding connectors.
FURSE Saudi Arabia Yes
GANSEC SHENGYUEAN WIRE & CABLE CO. CHINA Yes
LTD.
ILJIN CORP./JIWOONG ELECTRIC CO. SOUTH KOREA Yes
LTV COPPERWELD United States Yes
SAUDI ELECTRIC INDUSTRIES CO. LTD. Saudi Arabia-JEDDAH Yes

Page 49 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 7

12 . 5 COMPOSITE OPTICAL OH GROUND WIRE (OPGW)


12. 5. 1 OPGW Applicable Standards: 10-TMSS-04

AFL TELECOMMUNICATIONS EUROPE LTD United Kingdom-- Yes PREVIOUSLY ALCOA FUJIKURA LTD (AFL).
AFL Telecommunications GmbH GERMANY-Monchengladbach Yes EXTENDED GUARANTEE/WARRANTY FOR A PERIOD OF 10
YEARS.

Previously Draka Comteq Germany GmbH & KG.


BRUGG TELECOM AG SWITZERLAND Yes
CORNING CABLES (BICC) United Kingdom-PRESCOT Yes
DRAKA NK FINLAND Yes
FUJIKURA JAPAN Yes
FURUKAWA ELECTRIC CO. LTD. JAPAN Yes
Jiangsu Zhongtian Technology Co.Ltd (ZTT) CHINA-Nantong Yes Based on TS&SD Letter # 10-01654-03032301 dated June 05,
-China 2010 and S&SD Letter 12-05204-1-30504401 dated February
04, 2013. It is prequalified for OPGW as conforming to National
Grid SA specification # 10-TMSS-04, Rev.0, with the following
conditions:

OPGW type ZTT 13.3mm & ZTT 17.3mm 48 fibers is


successfully type tested as per SEC/National Grid SA
requirements as mentioned below:

-KEMA witness report TIC 3170-12 for ZTT 13.3mm OPGW


-SECRI Type Test Report 12-2009-1 for ZTT 13.3mm OPGW
-KEMA witness report TIC 3171-12 for ZTT 17.3mm OPGW
-SECRI Type Test Report 12-2009-2 for ZTT 17.3mm OPGW

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 18, 2009.

Page 50 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
LS CABLES KOREA, Republic of Yes Based on TS&SD letter # 10-02583-03032301 dated
19/09/2010, it is pre-qualified for OPGW as confirming to SEC
specification # 10-TMSS-04,Rev.0, with the following conditions:

All type/design; routine/sample and special tests per SEC


material specification # 10-TMSS-04, Rev.0 of first batch of each
types of OPGW to be supplied to SEC shall be conducted in an
independent testing laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by Manufacturer. This was confirmed in writing by the
manufacturer through letter #Nil dated 24th December 2009.

Ten (10) years extended warranty for each types of OPGW


from the date of PAC of the turnkey project in case of contract
award or date of delivery in case of direct material supply order.
This was confirmed in writing by the manufacturer through letter
#Nil dated 24th December 2009.
PHILLIPS FITEL CANADA Yes
PIRELLI ITALY Yes
PRYSMIAN TELECOM SPAIN Yes PREVIOUSLY "PIRELLI"
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Based on TS&SD letter# 09-F00730/03-03032301 dated 24th
August 2009, Taihan Electric Wire Co. Ltd. from South
Korea-Anyang for OPGW as confirming to SEC specification #
10-TMSS-04, rev.0 with the following conditions:
All type, design, special & routine tests as per SEC
specifications/standards shall be carried out on the first batch to
be supplied to SEC in securing an order in the manufacturer's
laboratory in the presence of three (3) SEC engineers & one (1)
approved independent inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
Total = 13

12 . 6 HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR


12. 6. 1 HEAT RESISTANT ALUMINUM ALLOY CONDUCTOR Applicable Standards: 10-TMSS-06

FUJIKURA VISCAS CORP JAPAN Yes IT IS A CONSORTIUM OF FUJIKURA & FURUKAWA. ONLY INVAR
CONDUCTORS PER CLAUSE 1.3 & 1.4 OF 10-TMSS-06. FIRST
LOT TO BE TYPE TESTED IN THE PRESENCE OF 3 SEC ENGRS
AND IIA INSPECTOR; EXTENDED WARRANTY FOR 10 YEARS.
J-POWER SYSTEM CORP. JAPAN Yes Based on TS&SD letter# 09-00649-1-03032301 dated 28 March
2009 it is pre-qualified for GTACSR & GZTACSR.

Page 51 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
LS CABLES KOREA, Republic of Yes Based on TS&SD letter # 10-02584-03032301 dated
19/09/2010, it is pre-qualified for Heat Resistance Aluminum
Alloy Conductors, Gap& Non Gap type as confirming to SEC
specification # 10-TMSS-06,Rev.0, with the following conditions:

All type/design; routine/sample and special tests per SEC


material specification # 10-TMSS-06, Rev.0 of first batch of each
types of Heat Resistance Aluminum Alloy Conductors to be
supplied to SEC shall be conducted in an independent testing
laboratory in the presence of three (3) SEC engineers & one (1)
SEC approved independent inspection agency Inspector and all
cost pertaining to the tests shall be borne by Manufacturer. This
was confirmed in writing by the manufacturer through letter #Nil
dated 08th January 2010.

Ten (10) years extended warranty for each types of Heat


Resistance Aluminum Alloy Conductors from the date of PAC of
the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed in
writing by the manufacturer through letter #Nil dated 08th
January 2010.

Full time presence of LS-Korea expert during execution of


first order with Gap type conductor for guidance and training of
SEC/Contractor staff about installation of this type of conductor
as confirmed through LS letter # LS/LHJ-100526/00 dated 26th
May 2010.

Full technical support will be provided to SEC during


operation of Gap Conductors for minimum five (5) years period
from first project as confirmed through LS letter # LS/LHJ-
100526/00 dated 26th May 2010.
Total = 3

13 INSULATED CONDUCTOR CABLE (XLPE)

13 . 1 13.8 KV
13. 1. 1 XLPE CABLE 13.8 KV Applicable Standards: 11-TMSS-04

DUBAI CABLE CO. United Arab Emirates-DUBAI Yes Including Joints & Terminations
ELSEWEDY EGYTECH CABLE CO. EGYPT-- Yes Including Joints & Terminations
JEDDAH CABLE CO. Saudi Arabia-JEDDAH Yes Including Joints & Terminations
LS KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & Terminations

Page 52 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
OMAN CABLE INDUSTRIES MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008
no accessories are pre-qualified
RIYADH CABLES Saudi Arabia-RIYADH Yes Including Joints & Terminations
SAUDI CABLE Saudi Arabia-JEDDAH Yes Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations

Total = 8

13 . 2 33 & 34.5 KV
13. 2. 1 XLPE CABLE 33 & 34.5 KV Applicable Standards: 11-TMSS-04

DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations


DEMIRER KABLO/SAUDI CABLE CO. TURKEY-- Yes Including Joints & Terminations
DUBAI CABLE CO. United Arab Emirates-DUBAI Yes Including Joints & Terminations
ELSEWEDY EGYTECH CABLE CO. EGYPT-- Yes Including Joints & Terminations
FUJIKURA CABLES JAPAN Yes Including Joints & Terminations
JEDDAH CABLE CO. Saudi Arabia-JEDDAH Yes Including Joints & Terminations
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
LS KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & Terminations
MKM HUNGARY Yes Including Joints & Terminations
OMAN CABLE INDUSTRIES MUSCAT-- Yes Ref# is 08-02531/01-0303230 dated 08/11/2008
no accessories are pre-qualified
RIYADH CABLES Saudi Arabia-RIYADH Yes Including Joints & Terminations
SAUDI CABLE Saudi Arabia-JEDDAH Yes Including Joints & Terminations
SHOWA CABLE JAPAN Yes Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations

Total = 14

13 . 3 XLPE CABLES 69 KV
13. 3. 1 XLPE CABLES 69 KV Applicable Standards: 11-TMSS-01

ALCATEL FRANCE Yes Including Joints & Terminations


DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations
DEMIRER KABLO/SAUDI CABLE CO. TURKEY-- Yes Including Joints & Terminations

Page 53 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
DRAKA NK FINLAND Yes Including Joints & Terminations
ELSEWEDY EGYTECH CABLE CO. EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLE
TESTS AT SEC APPROVED INDEPENDENT LABORATORY IN
PRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION
AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;
10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS
& TERMINATIONS ALSO;
FUJIKURA CABLES JAPAN Yes Including Joints & Terminations
FURUKAWA ELECTRIC CO. LTD. JAPAN Yes Including Joints & Terminations
JEDDAH CABLE CO. Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated
24/10/2010, it is pre-qualified for 69kV, 1x630mm XLPE Power
Cable as confirming to SEC specification # 11-TMSS-01, Rev.0,
with the following condition:

Ten (10) years extended warranty for the proposed 69kV,


1x630mm XLPE Power Cable from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed in
writing by Jeddah Cable Co. through letter #Nil dated 26th June
2006.
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
MKM HUNGARY Yes Including Joints & Terminations
NEXANS NORWAY AS NORWAY Yes Including Joints & Terminations
PIRELLI KABEL AND SYSTEM GMBH GERMANY-BERLIN Yes Including Joints & Terminations
RIYADH CABLES Saudi Arabia-RIYADH Yes Including Joints & Terminations
SAUDI CABLE Saudi Arabia-JEDDAH Yes Including Joints & Terminations
SUDKABEL GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & Terminations

Total = 15

13 . 4 110KV TO 132 KV
13. 4. 1 XLPE CABLES 110 TO 132 KV Applicable Standards: 11-TMSS-02

BRUGG SWITZERLAND Yes Including Joints & Terminations


DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations
DEMIRER KABLO/SAUDI CABLE CO. TURKEY-- Yes Including Joints & Terminations
DRAKA NK FINLAND Yes Including Joints & Terminations

Page 54 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ELSEWEDY EGYTECH CABLE CO. EGYPT-- Yes TO CARRY OUT ALL TYPE/DESIGN AND ROUTINE/SAMPLE
TESTS AT SEC APPROVED INDEPENDENT LABORATORY IN
PRESENCE OF A REPRESENTATIVE OF 3RD PARTY INSPECTION
AGENCY & THREE ENGINEERS OF SEC FOR FIRST CONTRACT;
10 YEARS OF EXTENDED GUARANTEE/WARRANTY; FOR JOINTS
& TERMINATIONS ALSO;
FUJIKURA JAPAN Yes Including Joints & Terminations
FURUKAWA ELECTRIC CO. LTD. JAPAN Yes Including Joints & Terminations
JEDDAH CABLE CO. Saudi Arabia-JEDDAH Yes Based on TS&SD letter # 10-02784-01-03032301 dated
24/10/2010, it is pre-qualified for 132kV, 1x1200mm XLPE
Power Cable as confirming to SEC specification # 11-TMSS-02,
Rev.0, with the following condition:

Ten (10) years extended warranty for the proposed 132kV,


1x1200mm XLPE Power Cable from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed in
writing by Jeddah Cable Co. through letter #Nil dated 26th June
2006.
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
LS KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & Terminations
NEXANS NORWAY AS NORWAY Yes Including Joints & Terminations
PIRELLI KABEL AND SYSTEM GMBH GERMANY-BERLIN Yes Including Joints & Terminations
RIYADH CABLES Saudi Arabia-RIYADH Yes Including Joints & Terminations
SAUDI CABLE Saudi Arabia-JEDDAH Yes Including Joints & Terminations
SUDKABEL GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations

Total = 16

13 . 5 230 K V
13. 5. 1 XLPE CABLE 230 K V Applicable Standards: 11-TMSS-02

BRUGG SWITZERLAND Yes Including Joints & Terminations; COMPLETE TYPE, SPECIAL &
ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS
WARRANTY FROM THE DATE OF PAC ARE REQUIRED
DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations
DEMIRER KABLO/SAUDI CABLE CO. TURKEY-- Yes Including Joints & Terminations
FUJIKURA JAPAN Yes Including Joints & Terminations
FURUKAWA ELECTRIC CO. LTD. JAPAN Yes Including Joints & Terminations

Page 55 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
LS KOREA, Republic of Yes PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.
NEXANS NORWAY AS NORWAY Yes Including Joints & Terminations
PIRELLI KABEL AND SYSTEM GMBH GERMANY-BERLIN Yes Including Joints & Terminations
SAUDI CABLE Saudi Arabia-JEDDAH Yes based on TS&SD letter# 09-01366-03032301 dated 10th. May
2009, it is pre-qualified as conforming to SEC specifications #
11-TMSS-02, rev.0 with the following conditions:
All type/design and routine/sample tests shall be carried
out on the first batch of 230kV XLPE power cable to be supplied
to SEC in securing an order in an independent testing laboratory
as per IEC/AEIC and SEC standards in the presence of three (3)
SEC engineers & one (1) approved independent inspection
agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
SUDKABEL GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.
Total = 12

13 . 6 380 KV
13. 6. 1 XLPE CABLE -380 KV Applicable Standards: 11-TMSS-02

BRUGG SWITZERLAND Yes Including Joints & Terminations; COMPLETE TYPE, SPECIAL &
ROUTINE TESTS FOR THE FIRST ORDER , ALSO 10 YEARS
WARRANTY FROM THE DATE OF PAC ARE REQUIRED
DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations
DEMIRER KABLO/SAUDI CABLE CO. TURKEY-- No Based on TS&SD letter 11-01374-03032301 dated April 27,
2011. It is DISQUALIFIED for 380KV XLPE Cable.
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
LS KOREA, Republic of Yes PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.

Page 56 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
NEXANS FRANCE Yes Including Joints & Terminations
NEXANS NORWAY Yes Including Joints & Terminations
NKT GERMANY Yes Including Joints & Terminations
PIRELLI GERMANY-BERLIN Yes Including Joints & Terminations
SUDKABEL GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.
VISCAS FUJIKURA JAPAN Yes Including Joints & Terminations

Total = 12

14 LOW-PRESSURE OIL FILLED (LPOF) CABLE

14 . 1 110 TO 132 KV
14. 1. 1 LPOF CABLE 110 KV TO 132 KV Applicable Standards: 11-TMSS-03

ALCATEL CABLE FRANCE Yes Including Joints & Terminations


CANADA WIRE CANADA Yes Including Joints & Terminations
DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations
DATWYLER United Kingdom Yes Including Joints & Terminations
FUJIKURA JAPAN Yes Including Joints & Terminations
FURUKAWA ELECTRIC CO. LTD. JAPAN Yes Including Joints & Terminations
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
KABEL RHEYDT (AEG) GERMANY Yes Including Joints & Terminations
KABEL WERK BRUGG AG SWITZERLAND Yes Including Joints & Terminations
LS CABLES KOREA, Republic of Yes PREVIOUSLY LG; Including Joints & Terminations
NEXAN(CORTALLIOD) SWITZERLAND Yes Including Joints & Terminations
NEXANS NORWAY AS NORWAY Yes Including Joints & Terminations
PIRELLI ITALY Yes Including Joints & Terminations
PIRELLI KABEL AND SYSTEM GMBH GERMANY-BERLIN Yes Including Joints & Terminations
SHOWA CABLE JAPAN Yes Including Joints & Terminations
SUDKABEL GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations

Page 57 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 17

14 . 2 230 KV
14. 2. 1 LPOF CABLE 230 KV Applicable Standards: 11-TMSS-03

ALCATEL FRANCE Yes Including Joints & Terminations


CANADA WIRE CANADA Yes Including Joints & Terminations
DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations
FUJIKURA JAPAN Yes Including Joints & Terminations
FURUKAWA ELECTRIC CO. LTD. JAPAN Yes Including Joints & Terminations
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
KABEL RHEYDT (AEG) GERMANY Yes Including Joints & Terminations
NEXANS NORWAY AS NORWAY Yes Including Joints & Terminations
PIRELLI KABEL AND SYSTEM GMBH GERMANY-BERLIN Yes Including Joints & Terminations
SUDKABEL GERMANY-GERMANY Yes PREVIOUSLY ABB. Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations.
Complete Type, Routine / Sample tests for first order.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.
Total = 11

14 . 3 380 KV
14. 3. 1 LPOF CABLE 380 KV Applicable Standards: 11-TMSS-03

ALCATEL FRANCE Yes Including Joints & Terminations


CANADA WIRE CANADA Yes Including Joints & Terminations
DAINICHI-NIPPON CABLES (MITSUBISHI) JAPAN Yes Including Joints & Terminations
FUJIKURA JAPAN Yes Including Joints & Terminations
FURUKAWA ELECTRIC CO. LTD. JAPAN Yes Including Joints & Terminations
HITACHI CABLE LTD. JAPAN Yes Including Joints & Terminations
J-POWER SYSTEM CORP. JAPAN Yes Including Joints & Terminations
KABEL RHEYDT (AEG) GERMANY Yes Including Joints & Terminations

Page 58 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
LS CABLES KOREA, Republic of Yes PREVIOUSLY LG;
Including Joints & Terminations.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.
MITSUBISHI CABLE INDUSTRIES LTD JAPAN Yes Including Joints & Terminations
PIRELLI ITALY Yes Including Joints & Terminations
PIRELLI GENERAL United Kingdom Yes Including Joints & Terminations
PIRELLI KABEL AND SYSTEM GMBH GERMANY-BERLIN Yes Including Joints & Terminations
SHOWA CABLE JAPAN Yes Including Joints & Terminations
SIEMENS GERMANY Yes Including Joints & Terminations
STANDARD TELEFON OG KABELFABRIK A/S NORWAY Yes Including Joints & Terminations
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes Including Joints & Terminations.
Complete Type, Routine / Sample tests for first order.
Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order.
Total = 17

14 . 4 LINK BOX FOR U/G POWER


14. 4. 1 LINK BOX FOR U/G POWER Applicable Standards: 12-TMSS-11

* --- Yes LINK BOX SUPPLIED / MANUFACTURED BY APPROVED POWER


CABLE MANUFACTURERS ARE ACCEPTABLE
AARTCO Saudi Arabia-Al-Khobar Yes UP TO 230KV.
ABB SWEDEN Yes
AL SHAHRANI EST. Saudi Arabia-RIYADH Yes
DEMIRER KABLO/SAUDI CABLE CO. TURKEY-- Yes
FUJIKURA VISCAS CORP JAPAN Yes
HAYCOLEC SWITCHGEAR PTY AUSTRALIA-NSW Yes
J-POWER SYSTEM CORP. JAPAN Yes
LS CABLES KOREA, Republic of Yes PREVIOUSLY LG
MOHAMMAD AL OJAIMI FACTORY Saudi Arabia-RIYADH Yes PAD MOUNTED STAINLESS STEEL BOXES AND UNDER GROUND
FIBER GLASS BOXES UP TO 132KV ACCEPTABLE. EXTENDED
GUARANTEE FOR 10 YEARS FOR THE FIRST SUPPLY AND IT
WILL BE REDUCED YEARLY IN CASE OF FUTURE PROJECT
AWARDS.

Page 59 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
NEXANS FRANCE Yes
PIRELLI GERMANY-BERLIN Yes
Power and Telecommunication Equipments Saudi Arabia-Jeddah Yes Based on TS&SD fax ref# 09-00396-1-03032301 dated
Factory (P.T.E. Co.) (CEPCO) 17/02/2009 P.T.E is prequalified for Link Boxes rated up to
380kV.
* (10) years extended warranty.
STEINER GERMANY Yes

Total = 14

14 . 5 SHEATH VOLTAGE LIMITERS (SVL)


14. 5. 0 SHEATH VOLTAGE LIMITERS (SVL) Applicable Standards:

ABB SWEDEN Yes


HAYCOLEC SWITCHGEAR PTY AUSTRALIA-NSW Yes

Total = 2

14 . 6 EARTHING BONDING CABLE


14. 6. 0 EARTHING BONDING CABLE Applicable Standards:

FUJIKURA VISCAS CORP JAPAN Yes


J-POWER SYSTEM CORP. JAPAN Yes
LS CABLES KOREA, Republic of Yes PREVIOUSLY LG
PIRELLI GERMANY-BERLIN Yes
SAUDI CABLE Saudi Arabia-JEDDAH Yes
SAUDI MODERN CO. (RIYADH CABLES) Saudi Arabia- RIYADH Yes

Total = 6

15 FIBER OPTIC CABLE

15 . 1 NON-METALLIC FIBER OPTIC (F/O) CABLE & ACCESSORIES


15. 1. 0 NON-METALLIC FIBER OPTIC (F/O) CABLE & ACCESSORIES Applicable Standards: 48-TMSS-02

AFL TELECOMMUNICATIONS EUROPE LTD United Kingdom-- Yes PREVIOUSLY ALCOA FUJIKURA LTD. (AFL)
ALCATEL SWEDEN Yes

Page 60 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
B.V.TWENTSCHE KABELFABRIEK NETHERLANDS- NAAKSBERGEN Yes
BICC United Kingdom Yes
BRUGG TELECOM AG SWITZERLAND Yes
CORNING CABLES United Kingdom-PRESCOT Yes
DRAKA NK FINLAND Yes
ERICSON SWEDEN Yes ACCESSORIES ONLY
FUJIKURA LTD. JAPAN Yes
FURUKAWA JAPAN Yes
HITACHI JAPAN Yes
INDUSTRIAS ARRUTI SPAIN Yes ONLY ACCESSORIES
LS KOREA, Republic of Yes PREVIOUSLY LG
MIDDLE EAST OPTIC FIBER & CABLE Saudi Arabia-RIYADH Yes
MANUFACTURING CO. (MEFC)
MIDDLE EAST SPECIALIZED CABLE (MESC) Saudi Arabia-Riyadh Yes
NKF KABEL B.V. NETHERLANDS Yes
NOKIA FINLAND Yes ACCESSORIES ONLY
Oman Fiber Optic Cable Company Oman-Rusayl Yes Based on TS&SD letter# 10-00909-2-03032300 dated April 06,
2010. It is pre-qualified for Non Metallic Fiber Optic Cable per
SEC Specification 48-TMSS-02, Rev.0 with the following
conditions:

Type Test: The first batch of each type of Non Metallic Fiber
Optic Cable to be supplied to SEC shall be type tested per
relevant International and SEC Specifications in presence of
three (3) SEC Engineers and one (1) SEC approved IIA Inspector
and all cost pertaining to the test shall be borne by the
Manufacturer as confirmed through Letter# Nil dated September
12, 2009.

Extended Warranty: Ten (10) year Extended Warranty shall be


applicable for all supplies made by Oman Fiber Optic Cable
Company to SEC as confirmed through Letter# EU.SEC.PQ.01
dated June17, 2009.

Page 61 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
OPTOKON CZECH REPUBLIC-Jihlava Yes ONLY FOR THE FOLLOWING ACCESSORIES
1 Standard 19 rack (ROV Series) and 23" rack
2 Standard 19" rack Mount Fiber Optic Patch Panel type MCNP &
MFDC consisting of 12/24/36/48 Ports
3 Fiber Optic Wall Mount Box type MPIC consisting of
12/24/36/48 Ports
4 Fiber Storage Shelf type MFSS
5 Optical Pig Tails/Patch Chords equipped with FC/PC & E2000
Connectors
PIRELLI ITALY Yes
PRYSMIAN TELECOM SPAIN Yes PREVIOUSLY "PIRELLI"
R & M Reichle & De-Massari AG SWITZERLAND-Wetzikon Yes Based on S&SD Letter 13-02127-030504401 dated May 19,
2013, R & M Reichle & De-Massari AG, Wetzikon, Switzerland is
pre-qualified for "Accessories only" fiber optic and copper
passive components (Structure Cabling) as conforming to
National Grid SA specification # 01-TMSS-01, Rev.01, with the
following conditions:

Five (5) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by R
& M Reichle & De-Massari AG, Wetzikon, Switzerland through
their letter #Nill dated June 10, 2013.
RIYADH CABLES Saudi Arabia-RIYADH Yes
RIYADH TELEPHONE CABLES CO. Saudi Arabia-RIYADH Yes
SAUDI CABLE Saudi Arabia-JEDDAH Yes Based on S&SD Letter 12-03896-30504401 dated November 10,
2012, SAUDI CABLE Co. - Saudi Arabia-Jeddah is pre-qualified
for Non-Metallic Fiber Optic Cable (F/O) Cable & Accessories as
conforming to SEC Specification # 48-TMSS-02, Rev.0, with the
following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated June 12, 2011.
SIEMENS GERMANY Yes
SUMITOMO JAPAN-YOKOHAMA Yes
TE Connectivity Ltd. United States-- Yes Based on S&SD Letter 12-03688-01-30504401 dated January
03, 2012. The name of the manufacturer has been changed
from ADC- United States to TE Connectivity Ltd.-United States.

Page 62 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
TELECT Poland-Wroclaw Yes based on TS&SD letter# 09-01095-03032301 dated 18th. April
2009 for the following accessories:
- Management Rack E-9000 series
- Distribution & Termination Unit LCX.
- Wall mounted unit LanLinxs.
Total = 29

16 PILOT WIRE CABLES & ACCESSORIES

16 . 0

16. 0. 0 PILOT WIRE CABLES & ACCESSORIES Applicable Standards: 48-TMSS-01,48-TMSS-03,48-TMSS-04,48-TMSS-05

DEMIRER KABLO TURKEY Yes CABLE & ACCESSORIES


GOLDSTAR CABLE KOREA, Republic of Yes UP TO 100 PAIRS
JEDDAH CABLE CO. Saudi Arabia-JEDDAH Yes
KERPENWORK GERMANY Yes CABLE & ACCESSORIES
LS CABLES KOREA, Republic of Yes PREVIOUSLY LG
MIDDLE EAST SPECIALIZED CABLE (MESC) Saudi Arabia-Riyadh Yes
RIYADH CABLES Saudi Arabia-RIYADH Yes
SAUDI CABLE Saudi Arabia-JEDDAH Yes
SIEMENS GERMANY Yes CABLE & ACCESSORIES
STEINER GERMANY Yes
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes

Total = 11

17 SHIELDED CABLE FOR INSTRUMENTATION

17 . 0

17. 0. 0 SHIELDED CABLE FOR INSTRUMENTATION Applicable Standards:

ALPHA United States Yes


AT & T United States-NEW YORK Yes
BELDEN United States Yes
MIDDLE EAST SPECIALIZED CABLE (MESC) Saudi Arabia-Riyadh Yes

Page 63 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SAUDI CABLE Saudi Arabia-JEDDAH Yes Based on TS&SD fax ref.#08-02969-3-03032301 dated
07/01/2009. Pre-Qualified for Shielded Instrumentation &
Thermocouple Cables with this conditions:
-First batch shall be type, designe, special, acceptance & routine
tests in the factory test laboratory in presence of (3) SEC
engineers & (1) independent inspector.
-(10) years warranty
TEKAB Co. Ltd. United Arab Emirates-Sharjah Yes APPROVED FOR CABLES WITHOUT METALLIC SHEATH; TYPE
TEST CERTIFICATE FROM INDEPENDENT LAB TO BE
SUBMITTED FOR 1ST ORDER; EXTENDED QUARANTEE FOR 10
YEARS.
Total = 6

18 POWER /OR CONTROL CABLE (0.6/1KV)

18 . 0

18. 0. 0 POWER /OR CONTROL CABLE (0.6/1KV) Applicable Standards: 11-TMSS-10

ALFANAR ELECTRICAL SYSTEMS Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-01432-03032301 dated 16th. May
2009 is pre-qualified for Low Voltage Power & Control Cables
0.6/1kV as conforming to SEC specifications # 11-TMSS-10,
rev.0 with the following conditions:
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
BELDEN United States Yes
ELSEWEDY EGYTECH CABLE CO. EGYPT-- Yes based on TS&SD fax ref# 09-00303/01-03032301 dated
18/02/2009.
JEDDAH CABLE CO. Saudi Arabia-JEDDAH Yes
JORDAN NEW CABLE COMPANY JORDAN-AMMAN Yes
MIDDLE EAST SPECIALIZED CABLE (MESC) Saudi Arabia-Riyadh Yes
OMAN CABLE INDUSTRIES MUSCAT-- Yes Based on TS&SD letters # 10-02435-03032301 dated
06/09/2010 & 10-02611-03032301 dated 02/10/2010, it is
pre-qualified for LV Power& Control Cables (0.6/1kV) rating as
confirming to SEC specification # 11-TMSS-10,Rev.0, with the
following condition:

Ten (10) years extended warranty for the proposed LV


Power& Control Cables from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order. This was confirmed by Oman
Cables Industry through letter # Nil dated 21/08/2010.
RIYADH CABLES Saudi Arabia-RIYADH Yes

Page 64 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SAUDI CABLE Saudi Arabia-JEDDAH Yes
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes
TEKAB Co. Ltd. United Arab Emirates-Sharjah Yes FOR CABLES WITH COPPER CONDUCTOR WITH ARMOR PER
CLAUSE 4.3.5.b, 4.3.5.c and 4.3.5.d ONLY;TYPE TEST
CERTIFICATE FROM INDEPENDENT LAB TO BE SUBMITTED
FOR 1ST ORDER; EXTENDED QUARANTEE FOR 10 YEARS.
Total = 11

19 CONDUCTOR FITTINGS/CABLE ACCESSORIES

19 . 1 CABLE SPLICE & TERMINATION KITS UP TO 132 KV


19. 1. 1 CABLE SPLICE & TERMINATION KITS UP TO 132 KV Applicable Standards: 12-TMSS-10

* --- Yes APPROVED POWER CABLE MANUFACTURERS UP TO 132KV ARE


ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING
ABB SWITZERLAND Yes
BRUGG CABLE SWITZERLAND Yes
DAITWEILER United Kingdom Yes
ELASTIMOLD United States Yes
FUJIKURA VISCAS CORP JAPAN Yes
G&W United States Yes SUSPENDED FOR ALL ONGOING & FUTURE PROJECTS DUE TO
FREQUENT FAILURE & VERY POOR FOLLOWUP RESPONSE
FROM THE MANUFACTURER.
J-POWER SYSTEM CORP. JAPAN Yes
LS CABLES KOREA, Republic of Yes PREVIOUSLY LG
NEXAN SWITZERLAND Yes
PFISTERER IXOSIL SWITZERLAND Yes PREVIOUSLY SEFAG IXOSIL
PIRELLI GERMANY-BERLIN Yes
RAYCHEM GERMANY Yes
RAYCHEM Saudi Arabia-DAMMAM Yes LIMITED TO 69KV ONLY. UNDER THE GROUP OF TYCO
TAIHAN ELECTRIC WIRE COMPANY KOREA, Republic of Yes

Total = 15

19 . 2 CABLE SPLICE & TERMINATION KITS UP TO 230 KV

Page 65 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
19. 2. 1 CABLE SPLICE & TERMINATION KITS UP TO 230 KV Applicable Standards: 12-TMSS-10

* --- Yes APPROVED 230 KV POWER CABLE MANUFACTURERS ARE ALSO


ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING
ABB GERMANY Yes

Total = 2

19 . 3 CABLE SPLICE & TERMINATION KITS UP TO 380 KV


19. 3. 0 CABLE SPLICE & TERMINATION KITS UP TO 380 KV Applicable Standards: 12-TMSS-10

* --- Yes APPROVED 380 KV POWER CABLE MANUFACTURERS ARE ALSO


ACCEPTABLE SUPPLIERS FOR SPLICE AND TERMINATION KITS
OF THE SAME RATING
J-POWER SYSTEM CORP. JAPAN Yes
LS KOREA, Republic of Yes PREVIOUSLY LG

Total = 3

20 CONNECTORS, OVERHEAD LINE COMPRESSION TYPE

20 . 0

20. 0. 0 CONNECTORS, OVERHEAD LINE COMPRESSION TYPE Applicable Standards: 12-TMSS-02

A SALVI & C SPA ITALY-MILANO Yes


ALCOA United States Yes
BURNDY United States Yes
CAROBENI ITALY Yes

Page 66 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
DALEKOVOD PROIZVODNJA Croatia/Hrvatska-Zagreb Yes Based on TS&SD fax # 10-01179-03032301 dated April 20,
2010, this manufacturer is pre-qualified for Compression Type
Connectors for O/H T/L per 12-TMSS-02, Rev.0 with the
following conditions:
Each new design of Compression Type Connectors for O/H T/L
which has NOT been type tested/supplied to SEC before, shall be
type tested as per 12-TMSS-02.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order.

Previously DALEKOVOD Croatia.[The name has been changed


based on S&SD/P&SFD letter # 12-01292-30504401 dated April
10, 2012]
ELASTIMOLD United States Yes
HOMAC United States Yes
INDUSTRIAS ARRUTI SPAIN Yes
ISELFA ITALY Yes
MOSDORFER AUSTRIA Yes
PFISTERER SWEDEN Yes PREVIOUSLY SEFAG
PFISTERER SWITZERLAND Yes PREVIOUSLY SEFAG AG
SA_RA Energy, Construction, Trade and TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated
Industry Co. Inc. 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty
SICAMEX FRANCE-FEUGEROLLE & Yes
SM-CI FRANCE-- Yes PREVIOUSLY AS FCI(SAAE), FRANCE.

Total = 15

21 INSULATORS

21 . 1 PORCELAIN INSULATORS
21. 1. 1 STATION POST INSULATOR PORCELAIN, UP TO 132 KV, 230 KV and 380 KV Applicable Standards: 15-TMSS-01

DIELVE ITALY Yes Approved Only Up To 132 KV Only


LAPP GERMANY-ROSENTHAL Yes
LAPP United States Yes .

Page 67 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
NGK JAPAN Yes .
PPC INSULATORS AUSTRIA Yes Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC
Insulators (Austria) Letter # Nil dated 4th July 2010, it is
pre-qualified for Station Post Insulator Porcelain, up to 132kV,
230kV&380kV as confirming to SEC specification # 15-TMSS-01,
Rev.0 with the following conditions:

A) Type tests conducted in presence of SEC Engineers on


132kV-10.9KN (Drawing # 124-11740-132-101), 230kV-10.3KN
(Drawing # 124-11850-132-101) and 380kV-12KN (Drawing #
124-11860-132-101 & 124-11870-132-801) Insulators.

B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PPC shall Type Tested in presence of
three (3) SEC Engineers and one (1) Approved Independent
Agency Inspector.

C) Ten (10) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.
SIEMENS GERMANY Yes .
W.S.I INDIA Yes Approved Only Up To 132 KV Only

Total = 7

21. 1. 2 OHL PORCELAIN INSULATOR UP TO 380 KV Applicable Standards: 15-TMSS-02,15-TMSS-03

CERAMTEC GERMANY-N/A Yes


DIELVE ITALY Yes
LAPP GERMANY-ROSENTHAL Yes
NGK JAPAN Yes
SIEMENS GERMANY Yes

Total = 5

21. 1. 3 LONG ROD PORCELAIN INSULATORS UP TO 380 KV Applicable Standards: 15-TMSS-04

LAPP GERMANY-ROSENTHAL Yes


NGK JAPAN Yes

Page 68 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
PPC INSULATORS (ELEKTROKERAMIK GERMANY Yes Based on TS&SD/ESD e-mail dated 07/07/2010 and PPC
SONNEBERG) Insulators (ELEKTROKERAMIK SONNEBERG, Germany) Letter #
Nil dated 4th July 2010, it is pre-qualified for Long Rod Porcelain
Insulators up to 380kV as confirming to SEC specification #
15-TMSS-04, Rev.01 with the following conditions:

A) Type tests conducted in presence of SEC Engineers on


160KN:LG75/18+17/1450 (Drawing # 11134-339900-B) and
330KN: LG105/18+17/1545 (Drawing # 11134-621400-A)
Insulators.

B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PPC shall Type Tested in presence of
three (3) SEC Engineers and one (1) Approved Independent
Agency Inspector.

C) Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first delivery
in case of direct material supply order.
SIEMENS GERMANY Yes

Total = 4

21 . 2 OHL GLASS INSULATOR UP TO 380KV


21. 2. 0 OHL GLASS INSULATOR UP TO 380KV Applicable Standards: 15-TMSS-02

SEDIVER BRAZIL-- Yes COMPLETE SAMPLE, TYPE & ROUTINE TESTS FOR THE FIRST
ORDER IS REQUIRED.
SEDIVER ITALY Yes Complete Sample, Type & Routine Tests for the first order is
required.
Total = 2

21 . 3 OHL COMPOSITE INSULATORS


21. 3. 1 OHL COMPOSITE INSULATORS UP TO 230KV Applicable Standards: 15-TMSS-05

E.B.REBOSIO S.r.L ITALY Yes Up To 132 kV only. Complete Type, Routine / Sample tests for
first order & 10 Years Warranty from the date of PAC is required.
FCI (FURUKAWA COMPOSITE INSULATORS HUNGARY-BUDAPEST Yes
LTD)
LAPP GERMANY-ROSENTHAL Yes
MACLEAN POWER SYSTEM United States-ILLINOIS Yes
NGK LOCKE INC. United States Yes

Page 69 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
PFISTERER SEFAG AG SWITZERLAND Yes It is pre-qualified for Composite Suspension & Tension insulators
up to 380 kV, Composite Line Post insulators up to 132 kV per
SEC Specification 15-TMSS-05, Rev.0 with the following
conditions based on TS&SD letter# 10-02374-03032301 dated
August 18, 2010:

A) Type Tests have been conducted in presence of SEC


Engineers on:
110KV, 120KN (Drawing # 138 206 -393A) and 160KN
(Drawing # 138 206 -667A) at 40 kA.
380KV, 160KN (Drawing # 138 206 -588BC) at 50kA.
However, the manufacturer shall perform the Power Arc Test
only at 63kA.

B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PFISTERRER SEFAG AG
Switzerland shall be Type Tested in presence of three (3) SEC
Engineers and one (1) Approved Independent Agency Inspector.

C) Ten (10) years warranty from the date of PAC.


XIANGFAN GUOWANG CHINA-- Yes MOLDED DESIGN ONLY; UPTO 132KV ONLY; ALL THE
TYPE/SPECIAL / ROUTINE TESTS TO BE CARRIED OUT FOR
FIRST CONTRACT/PROJECT AT SEC APPROVED INDEPENDENT
LAB IN PRESENCE OF 3 SEC ENGRS & A THIRD PARTY
INSPECTOR APPROVED BY SEC; 10 YEARS EXTENDED
WARRANTY
Total = 7

21. 3. 2 OHL COMPOSITE INSULATORS UP TO 380KV Applicable Standards: 15-TMSS-05

LAPP GERMANY-ROSENTHAL Yes FIRST BATCH OF EVERY NEW TYPE OF 380KV INSULATOR TO
BE TYPE TESTED IN PRESENCE OF 3 SEC ENGINEERS AND ONE
SEC APPROVED INDEPENDENT INSPECTOR; EXTENDED
WARRANTY OF 10 YEARS
MACLEAN POWER SYSTEM United States-ILLINOIS Yes *All type/design & special tests were performed for first batch at
Independent lab. in presence of SEC/IIA Inspectorbased on
TS&SD fax#09-F00306-030323001 dated 17/02/2009.
-Extended 10(ten) year guarantee/warranty is required.

Page 70 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
NGK LOCKE United States Yes Based on TS&SD letter # 10-F02356/02-03032301 dated
22/11/2010, it is pre-qualified for 380kV Composite Insulators
with the following conditions:

Manufacturer shall conduct/repeat the following tests on


the 380kV Composite Insulators 160kN, Cat.# 402-SL1370-SK-
95 using test series X (Note: Type tests using test series Y on
the 380kV Composite Insulators,160kN , Cat.# 402-SL1370-SK-
95 have already been conducted satisfactory by the
manufacturer in the presence of SEC engineers).
1. Power Arc Test (by using test series X) as per IEC 61467.
2. High Pressure Water Withstand Test followed by Electrical
Test and Verification of the Specified Mechanical Load (SML) as
per IEC 61109

Any new type of composite insulator (other than type Cat.


# 402-SL1370-SK-95) offered by NGK Locke Polymer Insulators
Inc.(USA) shall be subjected to all type, special ,sample and
routine tests as per SEC standards specifications in the presence
of three (03) SEC engineers & one (01) SEC approved
independent inspection agency(IIA) Inspector.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order.
PFISTERER SEFAG AG SWITZERLAND Yes It is pre-qualified for Composite Suspension & Tension insulators
up to 380 kV, Composite Line Post insulators up to 132 kV per
SEC Specification 15-TMSS-05, Rev.0 with the following
conditions based on TS&SD letter# 10-02374-03032301 dated
August 18, 2010:

A) Type Tests have been conducted in presence of SEC


Engineers on:
110KV, 120KN (Drawing # 138 206 -393A) and 160KN
(Drawing # 138 206 -667A) at 40 kA.
380KV, 160KN (Drawing # 138 206 -588BC) at 50kA.
However, the manufacturer shall perform the Power Arc Test
only at 63kA.

B) Any new type of Insulators (other than the types which are
mentioned in A) offered by PFISTERRER SEFAG AG
Switzerland shall be Type Tested in presence of three (3) SEC
Engineers and one (1) Approved Independent Agency Inspector.

C) Ten (10) years warranty from the date of PAC.


Total = 4

22 LINE INSULATOR HARDWARE FITTINGS

Page 71 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

22 . 1 HARDWARE FITTINGS
22. 1. 0 HARDWARE FITTINGS Applicable Standards: 12-TMSS-01

A B CHANCE United States-Centralia, MO Yes


A SALVI & C SPA ITALY-MILANO Yes
ALCOA United States Yes
CAROBENI ITALY Yes
DALEKOVOD PROIZVODNJA Croatia/Hrvatska-Zagreb Yes Based on TS&SD fax # 10-01179-03032301 dated April 20,
2010, this manufacturer is pre-qualified for Line Hardware
except Spacer Dampers per 12-TMSS-01, Rev.0 with the
following conditions:
Each new design of hardware which has NOT been type
tested/supplied to SEC before, shall be type tested as per
12-TMSS-01.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order.

Previously DALEKOVOD Croatia.[The name has been changed


based on S&SD/P&SFD letter # 12-01292-30504401 dated April
10, 2012]
DAMP ITALY Yes
DERVAUX FRANCE Yes Previously "SM-CI-France", the name has been change to
DERVAUX-France based on DERVAUX-France letter # Nil dated
13/10/2009.
INDUSTRIAS ARRUTI SPAIN Yes
ISELFA ITALY Yes
JOSLYN United States Yes
MOSDORFER GMBH AUSTRIA-WEIZ Yes
PFISTERER SWEDEN Yes PREVIOUSLY SEFAG
PFISTERER SWITZERLAND Yes PREVIOUSLY SEFAG AG
PREFORMED LINE PRODUCTS (PLP) United States Yes
SA_RA Energy, Construction, Trade and TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated
Industry Co. Inc. 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty
SICAMEX FRANCE-FEUGEROLLE & Yes

Page 72 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 16

22 . 2 OBSTRUCTION MARKERS AND CONDUCTOR LIGHTING


22. 2. 0 OBSTRUCTION MARKERS AND CONDUCTOR LIGHTING Applicable Standards: 12-TMSS-03

BP SOLAR ARABIA LTD Saudi Arabia Yes


DERVAUX FRANCE Yes
OBSTA FRANCE Yes
P&R TECHNOLOGIES United States Yes
PFISTERER SEFAG SWITZERLAND Yes PREVIOUSLY SEFAG AG
SHIN SEONG IND CORP. KOREA, Republic of Yes
SM-CI FRANCE-- Yes PREVIOUSLY AS FCI(SAAE), FRANCE.
TANA WIRE MARKER United States Yes

Total = 8

23 LINE SUPPORT STRUCTURE

23 . 1 SUBSTATION STEEL STRUCTURE (LATTICED)


23. 1. 0 SUBSTATION STEEL STRUCTURE (LATTICED) Applicable Standards: 20-TMSS-01

AL BABTAIN Saudi Arabia-RIYADH Yes

Page 73 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Al Yamamah Electric Powers Factory Saudi Arabia-Jeddah Yes Based on TS&SD letter # 11-03472-03032301 dated
09/01/2011, it is pre-qualified for Substation Steel Structure
(Latticed) up to 132kV as confirming to SEC specification #
20-TMSS-01, Rev.0 with the following conditions:

Any Substation Steel Structure (Latticed) of new design


proposed by Al-Yamamah Electric Power Towers Factory, Jeddah
(except for the pervious approved design and drawings
provided by SEC to the manufacturer) shall be subjected to
full-scale loading tests and other type, routine and special tests
as per SEC standards specifications and relevant International
Standards in the presence of three (03) SEC engineers & one
(01) SEC approved independent inspection agency (IIA)
Inspector and all cost pertaining to the tests shall be borne by
the manufacturer.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed in
writing by Al-Yamamah Electric Power Towers Factory, Jeddah
through letter # Nil dated 21st October 2009.
AL ZAMIL STEEL Saudi Arabia-DAMMAM Yes
AL-BABTAIN POWER&TELECOM CO. EGYPT-N/A Yes FIRST LOT OF EACH TYPE OF STRUCTURE SHALL BE TYPE
TESTED IN AN INDEPENDENT LAB IN PRESENCE OF SEC
ENGINEERS; 10 YEARS EXTENDED WARRANTY.
Alfanar Steel Saudi Arabia-Riyadh Yes Based on TS&SD letter# 08-1058/1-03032301 dated 25th May
2009 it is pre-qualified for Transmission Towers for projects up
to 132kV, Substation & Gantry Steel Structures up to 380kV and
Communications Tower for transmission sector as confirming to
SEC specification # 20-TMSS-01, rev.0 with the following
conditions:
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in the manufacturer's testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
ARABIAN INTERNATIONAL CO. Saudi Arabia-JEDDAH Yes

Page 74 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Energya Steel Solution (Hesham Helal El Saudi Arabia-Rabigh Yes Based on TS&SD letter# 09-2179/07-03032301 dated November
Sewedy & Partners for Steel Industries Co.) 11, 2009, approval of Executive Directive for TS&SD letter#
09-02179/06-03032301 dated November 11, 2009 & based on
S&SD letter# 13-01978/01-30504401 dated June 10, 2013, it is
pre-qualified for Substation Steel Structures up to 380kV as
conforming to National Grid SA specification # 20-TMSS-01,
Rev.01 with the following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order.
GEYARD FOR COMMERCE AND IMPORT CO. Saudi Arabia-AL KHOBAR Yes
HIDADA Saudi Arabia-JEDDAH Yes
KEC INTERNATIONAL LTD. INDIA-- Yes NAGPUR-BUTIPORI, JABALPUR, JAIPUR PLANTS ARE
ACCEPTABLE; ALL THE TESTS SHALL BE CARRIED OUT FOR
FIRST CONTRACT/PROJECT IN PRESENCE OF THREE (3) SEC
ENGINEERS; 10 YEARS OF EXTENDED WARRANTY.
LARSEN & TOUBRO LTD. INDIA-CHENNAI Yes
NAJEM Saudi Arabia Yes
SA_RA Energy, Construction, Trade and TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated
Industry Co. Inc. 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty
Total = 13

23 . 2 T/L STEEL STRUCTURE (LATTICED) UP TO 380 KV


23. 2. 0 T/L STEEL STRUCTURE (LATTICED) UP TO 380 KV Applicable Standards: 20-TMSS-01

AL BABTAIN Saudi Arabia-RIYADH Yes

Page 75 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Al Yamamah Electric Powers Factory Saudi Arabia-Jeddah Yes Based on TS&SD letter # 11-03472-03032301 dated January 09,
2011 & letter # 12-0054-30504401 dated January 10, 2012. It
is pre-qualified for Transmission Line Structure (Latticed) up to
380kV as conforming to SEC specification # 20-TMSS-01, Rev.0
with the following conditions:

For 230kV up to 380kV: all required Tests for Transmission


Line Steel Structures (Latticed) from 230kV up to 380kV as per
latest SEC specifications 20-TMSS-01 and 01-TMSS-01, technical
requirements and latest revision of relevant IEC standards shall
be carried out for the first Contract / Project in an independent
testing laboratory in the presence of three (3) Engineers of SEC
and one (01) SEC approved Independent Inspection Agency
(IIA) Inspector. The relevant cost of which shall be borne by
the manufacturer. This was confirmed by their letter # Nil dated
January 07, 2012.

Up to 132kV: Any Transmission Line Structure (Latticed) of


new design proposed by Al-Yamamah Electric Power Towers
Factory, Jeddah (except for the pervious approved design and
drawings provided by SEC to the manufacturer) shall be
subjected to full-scale loading tests and other type, routine and
special tests as per SEC standards specifications and relevant
International Standards in the presence of three (03) SEC
engineers & one (01) SEC approved independent inspection
agency (IIA) Inspector and all cost pertaining to the tests shall
be borne by the manufacturer.

Ten (10) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated October 21, 2009 & letter # Nil dated January 07,
2012.
AL ZAMIL STEEL Saudi Arabia-DAMMAM Yes
AL-BABTAIN POWER&TELECOM CO. EGYPT-N/A Yes FIRST LOT OF EACH TYPE OF STRUCTURE SHALL BE TYPE
TESTED IN AN INDEPENDENT LAB IN PRESENCE OF SEC
ENGINEERS; 10 YEARS EXTENDED WARRANTY.

Page 76 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Alfanar Steel Saudi Arabia-Riyadh Yes Based on TS&SD letter# 08-1058/1-03032301 dated 25th May
2009 it is pre-qualified for Transmission Towers for projects up
to 132kV, Substation & Gantry Steel Structures up to 380kV and
Communications Tower for transmission sector as confirming to
SEC specification # 20-TMSS-01, rev.0 with the following
conditions:
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in the manufacturer's testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
AL-SALAM INSDUTRIES AND TRADING Saudi Arabia-JEDDAH Yes ONE TRIAL PROJECT FOR 110/132 KV SHORT LINE.
EST./ADVANCE TECHNOLOGIES.
ARABIAN INTERNATIONAL CO. Saudi Arabia-JEDDAH Yes
Energya Steel Solution (Hesham Helal El Saudi Arabia-Rabigh Yes Based on TS&SD letter# 09-2179/07-03032301 dated November
Sewedy & Partners for Steel Industries Co.) 11, 2009 & based on S&SD letter# 13-01978/01-30504401
dated June 10, 2013, it is pre-qualified for Transmission Line
Steel Structures and Communication Towers as conforming to
National Grid SA specification # 20-TMSS-01, Rev.01 with the
following conditions:

The approval will be initially restricted to the following items


only:
1. Transmission Towers for projects up to 132kV
2. Communication Towers for Transmission Sector

Any Transmission Line Structure (Latticed) of new design


proposed by ENERGYA Steel Solutions, Rabigh (except for the
pervious approved design and drawings provided by SEC/
National Grid SA to the manufacturer) shall be subjected to
full-scale loading tests and other type, routine and special tests
as per National Grid SA standards specifications and relevant
International Standards in the presence of three (3)
SEC/National Grid SA engineers & one (1) National Grid SA
approved independent inspection agency (IIA) Inspector and all
cost pertaining to the tests shall be borne by the manufacturer.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or date of first
delivery in case of direct material supply order.
HIDADA Saudi Arabia-JEDDAH Yes

Page 77 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
KALPATARU Power Transmission Ltd. INDIA-Gujarat Yes Based on TS&SD letter 09-00665/1-03032301 dated 16th. March
2009 for Galvanised Transmission line Lattice Steel Tower up to
380kV as conforming to SEC specifications # 20-TMSS-01, rev.0;
with the following conditions:
Ten (10) years extended warranty.
Improvement needs indicated in the plant survey report.
All the tests shall be carried out for first contract/project in
presence of three (3) sec engineers & independent Inspector.
KEC INTERNATIONAL LTD. INDIA-- Yes Only NAGPUR-BUTIPORI, JABALPUR & JAIPUR Plants are
acceptable.

Any new transmission line structure designed by KEC, India


shall be subjected to full-scale loading tests and other
type/routine/sample tests per SEC specifications in the presence
of three (3) SEC engineers and one (1) SEC approved
Independent Inspection Agency (IIA) inspector and all costs
pertaining to tests shall be borne by the manufacturer.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of delivery
in case of first direct material supply order.
LARSEN & TOUBRO LTD. INDIA-CHENNAI Yes
SA_RA Energy, Construction, Trade and TURKEY-Ankara (Polatli Plant) & Yes Based on TS&SD fax ref.#09-00087-03032301 dated
Industry Co. Inc. 11/01/2009. Pre-Qualified for TL & S/S Lattice Steel Structure,
Line Hardware and Compression Type Connector for T/L O/H
upto 380kV except Space Damper upto 230kV with the following
conditions: -All tests shall be carried out in presence of (3) SEC
engineers. -(10) years warranty
Total = 13

23 . 3 STEEL POLES, TUBULAR UP TO 230 KV


23. 3. 0 STEEL POLES, TUBULAR UP TO 230 KV Applicable Standards: 20-TMSS-02

AL BABTAIN Saudi Arabia-RIYADH Yes

Page 78 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Energya Steel Solution (Hesham Helal El Saudi Arabia-Rabigh Yes Based on TS&SD Letter # 10-0331/06-03032301 dated
Sewedy & Partners for Steel Industries Co.) 28/06/2010, it is pre-qualified for Steel Poles, Tubular up to
230kV as confirming to SEC specification # 20-TMSS-02. Rev.0
with the following conditions:

All Type, Routine and Special Tests including the load test
per SEC specification # 20-TMSS-02 and all relevant
International Standards shall be conducted on the first batch in
presence of three (3) SEC Engineers and one (1) SEC approved
independent inspection agency (IIA) Inspector and related cost
pertaining to the test shall be borne by Hesham Helal EL Sewedy
& Partners for Steel Industries Co.(Energya Steel Solutions) as
confirmed by manufacturer through letter # SEC/WK/100524
dated 24th May 2010.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order as confirmed by Hesham
Helal EL Sewedy & Partners for Steel Industries Co.(Energya
Steel Solutions) letter # SEC/WK/100524 dated 24th May 2010 .
HIDADA Saudi Arabia-JEDDAH Yes
PETIT JEAN FRANCE Yes
SUMMIT MANUFACTURING United States-PA Yes
TECHNOPALI ITALY Yes
VALMONT United States Yes

Total = 7

23 . 5 WOOD POLES
23. 5. 1 WOOD POLES, ANSI CLASS HI H 3 Applicable Standards:

ATLANTIC WOOD IND. United States-GEORGIA Yes


CAHABA PRESSURE TREATED FOREST United States-ALABAMA Yes
PRODUCT (NORTH PACIFIC GROUP)
COLFAX CREOSOTING CO United States-LOUISIANA Yes
KOPPERS INDUSTRIES United States-PA Yes
STALLWORTH TIMBER United States-ALABAMA Yes
STELLA JONES INC. CANADA-NEW WESTMINSTER Yes
TAYLOR LUMBER (NORTH PACIFIC GROUP) United States-OREGON Yes

Total = 7

Page 79 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
23. 5. 2 WOOD POLES, ANSI CLASS I - 4 Applicable Standards:

ATLANTIC WOOD IND. United States-GEORGIA Yes


CAHABA PRESSURE TREATED FOREST United States-ALABAMA Yes
PRODUCT (NORTH PACIFIC GROUP)
COLFAX CREOSOTING CO United States-LOUISIANA Yes
KOPPERS INDUSTRIES United States-PA Yes
STALLWORTH TIMBER United States-ALABAMA Yes
STELLA JONES INC. CANADA-NEW WESTMINSTER Yes
TAYLOR LUMBER (NORTH PACIFIC GROUP) United States-OREGON Yes

Total = 7

24 GALVANIZED GUY WIRE (GROUNDING)

24 . 0 .
24. 0. 0 GALVANIZED GUY WIRE (GROUNDING) Applicable Standards: 10-TMSS-02

FLORIDA WIRE & CABLE United States Yes


JOSLYN United States Yes
SOUTHWIRE United States Yes
TREFILEUROPE FRANCE Yes

Total = 4

25 RACEWAYS

25 . 1 METAL ENCLOSED BUS DUCT, 4.16 13.8 KV OR 34.5 KV


25. 1. 0 METAL ENCLOSED BUS DUCT, 4.16 13.8 KV OR 34.5 KV Applicable Standards:

ABB ( T& D) United States-N/A Yes


UNIBUS United States Yes
WESCOSA Saudi Arabia-DAMMAM Yes

Total = 3

25 . 2 CABLE TRAY SYSTEMS

Page 80 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
25. 2. 0 CABLE TRAY SYSTEMS Applicable Standards: 24-TMSS-01

3M United States-Minnesota Yes


AB WIRE SWEDEN-sweden Yes
ABAHSAIN-COPE Saudi Arabia- DHAHRAN Yes
AL-AMAL CO. Saudi Arabia-RIYADH Yes FOR LADDERS & ACCESSORIES ALSO; 10 YEARS OF EXTENDED
WARRANTY;
ALASHHOURY INDUSTRY Saudi Arabia-Riyadh Yes Based on TS&SD letter # 11-0036/04-03032301 dated
06/06/2011, it's prequalified for Cable Trays & Cable Ladders as
conforming to SEC Specification # 24-TMSS-01, Rev.0 with the
following conditions:

Ten (10) years extended warranty from the date of PAC of


the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed by Al-Ashouri Industries through letter # 2010/4-
03/0003 dated 01/08/2010.

For any new design of Cable Trays or Cable Ladders


proposed by Al-Ashouri Industries (other than the test proven
SEC designs), Type, Special, routine and Sample test as per the
SEC standards/Specification shall be conduct on the first batch to
be supplied to SEC in presence of three (03) SEC Engineers in an
SEC approved independent test laboratory.
AL-MISBAH House for Steel Works Saudi Arabia-Riyadh Yes Based on TS&SD letter 09-00509/1-03032301 dated 16th. March
2009 for Metallic Cable Tray Systems as conforming to SEC
specifications # 24-TMSS-01, rev.0; with the following
conditions:
Ten (10) years extended warranty.
Improvement needs indicated in the plant survey report
ARABIAN INTERNATIONAL CO. Saudi Arabia-JEDDAH Yes
EFCOR United States Yes
ELECTROLINK Co. Ltd. Saudi Arabia-Riyadh Yes based on TS&SD letter 09-00524/1-03032301 dated 16th. March
2009 for Metallic Cable Tray Systems as conforming to SEC
specifications # 24-TMSS-01, rev.0; with the following
conditions:
Eight (8) years extended warranty.
Improvement needs indicated in the plant survey report.
HIDADA Saudi Arabia-JEDDAH Yes
MECSS - MID EAST CABLE SUPPORT Saudi Arabia- AL-KHOBAR Yes
SOLUTIONS
O-Z GEDNEY United States Yes
SAUDI ELECTRIC INDUSTRIES CO. LTD. Saudi Arabia-JEDDAH Yes

Page 81 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
TOLARTOIS FRANCE Yes
WESCOSA Saudi Arabia-DAMMAM Yes

Total = 15

26 CONDUIT FITTINGS

26 . 1 DUCT SEALING UNITS


26. 1. 0 DUCT SEALING UNITS Applicable Standards: 23-TMSS-02

AMIANTIT RUBBER IND. (ARIL) Saudi Arabia-DAMMAM Yes


UM- AL QUWAIN RUBBER INDUSTRIES United Arab Emirates Yes

Total = 2

27 SWITCHES

27 . 1 DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV


27. 1. 0 DISCONNECT SWITCH, AIR BREAK, UP TO 380 KV Applicable Standards: 30-TMSS-01

ABB ( T& D) United States-N/A Yes


ALPHA NIDAU SWITZERLAND Yes
AREVA FRANCE Yes
EFACEC PORTUGAL Yes
HAPAM NETHERLANDS Yes SUSPENDED based on TS&SD letter 10-00402-03032301 dated
February 08, 2010
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
MG/EGIC FRANCE Yes
S&C United States Yes
SDCEM FRANCE Yes
SIEMENS GERMANY Yes
SOUTHERN STATES United States Yes SOUTHERN STATES/ USA HAS ACQUIRED SIEMENS SWITCH
FACTORY
Total = 11

Page 82 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

27 . 2 LV AUTO-TRANSFER SWITCH
27. 2. 0 LV AUTO-TRANSFER SWITCH Applicable Standards:

ALSTOM FRANCE Yes


ASCO United Arab Emirates Yes
WESTINGHOUSE United States Yes

Total = 3

27 . 3 PAD MOUNTED SF6/OIL SWITCH, 34.5 KV


27. 3. 0 PAD MOUNTED SF6/OIL SWITCH, 34.5 KV Applicable Standards:

FRITZ DRIESHER KG GERMANY Yes

Total = 1

28 LV PANELS & ENCLOSURES

28 . 1 RELAY & CONTROL PANEL


28. 1. 0 RELAY & CONTROL PANEL Applicable Standards: 31-TMSS-01

ABB SWEDEN Yes


ABB/AEIL Saudi Arabia Yes
ACRASTYLE United Kingdom Yes
AEL -SIEMENS Saudi Arabia-JEDDAH Yes
ALFANAR ELECTRICAL SYSTEMS Saudi Arabia-RIYADH Yes Based on TS&SD letter# 09-01251-03032301 dated 03rd. May
2009 UP TO 380KV as confirming to SEC specification #
31-TMSS-01, rev.0 with Ten (10) years warranty from the date
of PAC of the Turnkey project in case of contract award or date
of delivery in case of direct material supply order.
AREVA United Kingdom Yes
CRUINKSHANK & PARTNERS LTD. United Kingdom Yes
EPS LTD. (GROUPE SCHNEIDER) Saudi Arabia-RIYADH Yes

Page 83 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ETA-PCS United Arab Emirates-DUBAI Yes It is pre-qualified for Relay & Control Panels as conforming to
SEC specification # 31-TMSS-01, Rev.0 with the following
condition:
Ten (10) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of delivery
in case of direct material supply order.
JAL INTERNATIONAL Saudi Arabia-KHOBAR Yes Up to 132kV only.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of delivery
in case of first direct material supply order.
LS KOREA, Republic of Yes PREVIOUSLY LG
MEMF-ETA Switchgear Manufacturing Company Saudi Arabia-Riyadh Yes Based on S&SD Letter 13-03789-03-30504401 dated January
28, 2013. It is prequalified for Relay & Control Panel up to
132kV as conforming to National Grid SA specification #
31-TMSS-01, Rev.0, with the following condition:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
META/12/AM dated March 23, 2011.
MOHD. AL-OJAIMI LTD. Saudi Arabia-Riyadh Yes Extended warranty for 10 years.
PROTEA/AREVA T&D FRANCE-- Yes 10 YEAR EXTENDED WARRANTY
REYROLLE LTD. United Kingdom Yes
SCHNEIDER H.V FACTORY FRANCE-GRENOBLE Yes
SIEMENS GERMANY Yes
System House Factory for Electric Panels (SEP) Saudi Arabia-Riyadh Yes Based on TS&SD letter# 09-01500-03032301 dated May 25,
2009, 10-01055/02-03032301 dated May 03, 2010 & S&SD
Letter 12-03596-02-30504401 dated April 29, 2012. It is
prequalified for Relay & Control Panel up to 380kV as conforming
to SEC specification # 31-TMSS-01, Rev.0 with the following
condition:
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated December 11, 2011.
TIEPCO Saudi Arabia-DAMMAM Yes
VA TECH Saudi Arabia-RIYADH Yes ASSEMBLING UP TO 132KV ONLY, ENCLOSURES SHALL BE
PROCURED FROM MESCO (RIYADH)

Page 84 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
WESCOSA Saudi Arabia-DAMMAM Yes Based on TS&SD letter # 11-F02715-03032301 dated
17/09/2011, it is prequalified for Relay & Control Panels, 230kV
and above as confirming to SEC specification # 31-TMSS-01,
Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first batch of
Relay & Control Panels to be supplied to SEC, in case of securing
an order, in the presence of three (3) SEC Engineers & one (1)
approved Independent Inspection Agency Inspector in an
Independent Testing Laboratory. All the related costs for
witnessing the tests will be borne by the manufacturer. This was
confirmed by WESCOSA-Dammam through letter # Nil dated
16/06/2010.

Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
WESCOSA-Dammam through letter # Nil dated 05/10/2010.
Total = 21

28 . 2 ANNUNCIATOR SYSTEM
28. 2. 0 ANNUNCIATOR SYSTEM Applicable Standards: 38-TMSS-05

ABB SUBSTATION AUTOMATION OY FINLAND Yes SACO 16D3


AMETEK POWER INSTRUMENTS United States Yes
FUJIKURA VISCAS CORP JAPAN Yes
J-POWER SYSTEM CORP. JAPAN Yes
LS KOREA, Republic of Yes PREVIOUSLY LG
NEXANS SWITZERLAND Yes
PAN ALARM United States Yes
PIRELLI GERMANY-BERLIN Yes
RONAN ENGINEERING United Kingdom Yes
RTK ENGINEERING LTD. United Kingdom Yes
SIEMENS GERMANY Yes
STEINER JAPAN Yes

Total = 12

29 ARRESTER, SURGE OR LIGHTNING

Page 85 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

29 . 1 SURGE ARRESTERS, STATION CLASS UP TO 380 KV


29. 1. 0 SURGE ARRESTERS, STATION CLASS UP TO 380 KV Applicable Standards: 35-TMSS-01

ABB SWEDEN Yes


ABB HV TECHNOLOGIES SWITZERLAND Yes
AREVA FRANCE Yes
BOWTHORPE United Kingdom Yes
COOPER (MCGRAW-ED) United States Yes
ELPRO INTL. LTD INDIA Yes Upto 132 kV Only - Complete Type, Routine / Acceptance tests
for first order & 10 Years Warranty from the date of PAC is
required.
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
JAPAN AE POWER SYSTEMS CORP. JAPAN Yes
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
OHIO BRASS United States Yes
SIEMENS GERMANY Yes
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
TRIDELTA GERMANY Yes

Total = 14

30 CIRCUIT BREAKER

30 . 1 DEADTANK SF6 BREAKER


30. 1. 1 DEADTANK SF6 BREAKERS, 69 KV Applicable Standards: 37-TMSS-01

ABB ( T& D) United States-N/A Yes


AREVA United States-CHARLEROI Yes SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-01705-30504401 dated March 23, 2013.

Page 86 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
GE-HITACHI HVB United States-GEORGIA Yes
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SIEMENS GERMANY-Berlin Yes Based on S&SD Letter 12-2202-01-30504401 dated July 24,
2012, it is pre-qualified for Dead Tank Circuit Breaker type 3AP1
DT 72.5KV & 145KV as conforming to National Grid SA
Specification # 37-TMSS-01, Rev.0 with the following
conditions:

CB type 3AP1 DT 72.5KV & 145KV is not capable for Reactor


and Capacitor bank back to back switching as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated April
27, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed by
Siemens through their letter# E T HP CB B SL/MTH, dated
December 18, 2012.
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 8

30. 1. 2 DEADTANK SF6 BREAKERS,110 - 132 KV Applicable Standards: 37-TMSS-01

ABB SWITZERLAND Yes


ABB ( T& D) United States-N/A Yes

Page 87 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
AREVA T&D Inc.-USA United States-Charleroi Yes SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-01705-30504401 dated March 23, 2013.

The old remark before suspension was:

Based on TS&SD letter # 10-02708-02-03032301 dated


25/10/2010, it is pre-qualified for 145kV Dead Tank Circuit
Breaker type DT1-145FK, 40KA, 2000A as confirming to SEC
specification # 37-TMSS-01, Rev.0, with the following condition:

Ten (10) years extended warranty for the proposed 145kV


Dead Tank Circuit Breaker type DT1-145FK from the date of PAC
of the turnkey project in case of contract award or date of
delivery in case of direct material supply order. This was
confirmed in writing by AREVA T&D, Inc-USA through letter #Nil
dated 6th March 2009.
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
GE-HITACHI HVB United States-GEORGIA Yes
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
SIEMENS GERMANY-Berlin Yes Based on S&SD Letter 12-2202-01-30504401 dated July 24,
2012, it is pre-qualified for Dead Tank Circuit Breaker type 3AP1
DT 72.5KV & 145KV as conforming to National Grid SA
Specification # 37-TMSS-01, Rev.0 with the following
conditions:

CB type 3AP1 DT 72.5KV & 145KV is not capable for Reactor


and Capacitor bank back to back switching as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated April
27, 2012.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated
December 18, 2012.
SIEMENS United States Yes CB type 3AP1 DT 72.5KV & 145KV is not capable for Reactor
and Capacitor bank back to back switching as confirmed by
Siemens through their letter# E T HP CB B SL/MTH dated April
27, 2012.

Page 88 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 10

30. 1. 3 DEADTANK SF6 BREAKERS, 230 KV Applicable Standards: 37-TMSS-01

ABB ( T& D) United States-N/A Yes SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-01705-30504401 dated March 23, 2013.

The old remark before suspension was:

Type DT1-245 F3; 10 years of extended warranty; di-electric


test, riv test, continuous current temperature rise test @ 2500 A,
60Hz is to be carried out in the first batch in the presence of 3
SEC engineers and 1 IIA inspector.
AREVA United States-CHARLEROI Yes SUSPENDED for all SEC/National Grid SA ongoing and
forthcoming projects based on VP, Engineering letter #
13-01705-30504401 dated March 23, 2013.

The old remark before suspension was:


Type DT1-245 F3; 10 years of extended warranty; di-electric
test, riv test, continuous current temperature rise test @ 2500 A,
60Hz is to be carried out in the first batch in the presence of 3
SEC engineers and 1 IIA inspector.
FUJI Electric Co. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
GE-HITACHI HVB United States-GEORGIA Yes
HITACHI Ltd. JAPAN-- Yes Originally JAPAN AE POWER SYSTEM CORP and subsequent
change affected as per HITACHI letter # XAE-VR-121213, dated
13-12-2012 and FUJI letter # AT-LTR-121115-1, dated
18-12-2012.
MITSUBISHI JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.
TOSHIBA CORPORATION, T&D JAPAN-- Yes ORIGINALLY TMT&D CORP. & DISSOLVED DURING APRIL 2005.

Total = 7

30 . 2 SF6, LIVE TANK


30. 2. 1 LIVE TANK, 69 KV SF6 BREAKER Applicable Standards: 37-TMSS-02

ABB SWEDEN Yes


ABB SWITZERLAND Yes

Page 89 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB SWITCHGEAR AB SWEDEN-LUDUVIKA Yes
AREVA SWITZERLAND-OBERENTFELDEN Yes
AREVA_FRANCE,VILLEUR BANNE FRANCE-,VILLEUR BANNE Yes
SIEMENS GERMANY Yes

Total = 6

30. 2. 2 LIVE TANK, 110 - 132 KV SF6 BREAKER Applicable Standards: 37-TMSS-02

ABB SWEDEN Yes


AREVA GERMANY Yes
AREVA_FRANCE,VILLEUR BANNE FRANCE-,VILLEUR BANNE Yes
SIEMENS GERMANY Yes

Total = 4

30. 2. 3 LIVE TANK, 230 KV SF6 BREAKER Applicable Standards: 37-TMSS-02

ABB SWEDEN Yes


AREVA_FRANCE,VILLEUR BANNE FRANCE-,VILLEUR BANNE Yes
SIEMENS GERMANY Yes

Total = 3

30. 2. 4 CIRCUIT SWITCHER, 69 230 KV Applicable Standards:

S&C CANADA Yes


S&C United States Yes
SIEMENS GERMANY Yes

Total = 3

31 SUPERVISING EQUIPMENT, TELEMETERING EQUIPMENT

31 . 1 LINE TRAP
31. 1. 0 LINE TRAP Applicable Standards: 38-TMSS-01

HAEFELY-TRENCH ELECTRIC CANADA Yes


HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes

Page 90 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 2

31 . 2 LINE TUNER
31. 2. 0 LINE TUNER Applicable Standards: 38-TMSS-02

ABB HV TECHNOLOGIES SWITZERLAND Yes

Total = 1

31 . 3 CCVT AND/OR COUPLING CAPACITOR CARRIER


31. 3. 1 CCPD/CCVT, 69KV UP TO 380 KV Applicable Standards: 38-TMSS-08,50-TMSS-02

ABB SWEDEN Yes


ABB HV TECHNOLOGIES SWITZERLAND Yes
Electrotecnica Arteche SPAIN-Mungia Yes Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for CVT Capacitor Voltage
Transformer up to 132 kV only as confirming to SEC
Specification # 50-TMSS-02 Rev.0 with the following conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of CVT Capacitor Voltage Transformer up to 132 kV
only in an Independent Testing Laboratory in the presence of
three (3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G
and October 07, 2011G.

The complete tests in one (1) sample of Nynas Nytro 10 XN


Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
GE United States Yes

Page 91 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HAEFELY-TRENCH ELECTRIC FRANCE Yes
HAEFELY-TRENCH ELECTRIC CANADA Yes
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
KONCAR INSTRUMENT TRANSFORMERS INC. Croatia/Hrvatska-- Yes Limited up to 132kV only. All Type, Special, Routine tests per
SEC Standards and IEC to be performed at KONCAR-Electrical
Institute Inc. as independent and accredited testing laboratory.
Extended guarantee/warrenty for 10 years.
NISSIN JAPAN Yes
PASSONI & VILLA ITALY Yes
PFIFFNER SWITZERLAND Yes Based on TS&SD letter# 09-01105-03032301 dated 24th June
2009, it is pre-qualified for CT & CVT rated up to 380kV as
confirming to SEC specification # 50-TMSS-01, rev.0 & #
50-TMSS-02, rev.0 respectively with the following conditions:
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in an independent testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
RITZ United States Yes TYPE TEST REQUIRED IN FIRST SUPPLY
TRENCH ITALIA ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO)

Total = 13

31 . 4 REMOTE TERMINAL UNIT (RTU)


31. 4. 0 REMOTE TERMINAL UNIT (RTU) Applicable Standards: 38-TMSS-03

ABB GERMANY Yes RTU-560, SPIDER 200,232 & 233


AREVA FRANCE Yes
EFACEC Sistemas de Elctronica, S.A PORTUGAL-Maia Yes Based on TS&SD letter# 09-01819-03032301 dated 23rd June
2009, it is prequalified for for RTU type CLP500 as confirming to
SEC specification # 38-TMSS-03, rev.0 with the following
condition:

Ten (10) years warranty from the date of PAC of the first
turnkey project in case of contract award or date of first delivery
in case of direct material supply order.
FOXBORO AUSTRALIA Yes
GE HARRIS CANADA Yes HARRIS D20

Page 92 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Global Energy Technologies Ltd. United Arab Emirates-Dubai Yes Ten (10) years extended warranty.
Microsol XCell SCADA RTU System
HARRIS CORPORATION United States-MELBOURNE, Yes HARRIS MICROPLEX 5000
JAL INTERNATIONAL Saudi Arabia-KHOBAR Yes ASSEMBLING ONLY
LSIS KOREA, Republic of-- Yes SEVEN (7) YEARS EXTENDED WARRANTY.
MICROSOL LTD. Ireland-DUBLIN Yes MICROSOL
SAT AUSTRIA Yes
SIEMENS GERMANY Yes
SIEMENS (LANDYS) - TELEGYR United States-SAN JOSE, CA Yes TELEGYR 5700
VA TECH AUSTRIA Yes

Total = 14

31 . 5 SEQUENCE OF EVENTS RECORDER


31. 5. 0 SEQUENCE OF EVENTS RECORDER Applicable Standards: 38-TMSS-04

ABB GERMANY Yes RTU 560


GE HARRIS CANADA Yes HARRIS D20
Global Energy Technologies Ltd. United Arab Emirates-Dubai Yes Ten (10) years extended warranty.
Microsol XCell SOE RTU System
JAL INTERNATIONAL Saudi Arabia-KHOBAR Yes SOE RECORDING SYSTEM AND INTERFACE & CONTROL
CABINET/MARSHALING PANELS
LSIS KOREA, Republic of-- Yes SEVEN (7) YEARS EXTENDED WARRANTY.
MICROSOL LTD. Ireland-DUBLIN Yes MICROSOL
RONAN ENGINEERING United States-LOS ANGELES, CA Yes X500E/1000

Total = 7

31 . 6 TRANSDUCERS
31. 6. 1 FREQUENCY TRANSDUCERS Applicable Standards:

ALSTOM United States Yes


ISKRA MIS SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT
EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
Total = 2

Page 93 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
31. 6. 2 TAP POSITION TRANSDUCERS Applicable Standards:

AREVA United Kingdom Yes

Total = 1

31. 6. 3 TRANSDUCERS Applicable Standards:

CEWE INSTRUMENTS AB SWEDEN Yes


ENERDIS FRANCE Yes
LSIS KOREA, Republic of-- Yes SEVEN (7) YEARS EXTENDED WARRANTY.
TILLQUIST SWEDEN Yes
TYCO ELECTRONICS (UK) Ltd - CROMPTON United Kingdom-- Yes Based on TS&SD Letters (08-F00975/01-03032301 dated June
INSTRUMENTS 04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
1560 is prequalified for Transducers as confirming to SEC
Specification # 40-TMSS-02, Rev.0 with the following condition:

Five (05) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total = 5

31. 6. 4 WATTHOURS/VARHOURS TRANSDUCERS Applicable Standards:

ISKRA MIS SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT


EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
MITSUBISHI ELECTRIC JAPAN Yes
SCIENTIFIC COLUMBUS United States Yes

Total = 3

31. 6. 5 VOLTAGE TRANSDUCERS Applicable Standards:

ABB (ASEA INC.) CANADA-MONTREAL Yes


AREVA United Kingdom Yes

Page 94 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ISKRA MIS SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT
EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
TRANSDATA United States Yes

Total = 4

31. 6. 6 WATTS/VARS TRANSDUCERS Applicable Standards:

ABB (ASEA INC.) CANADA-MONTREAL Yes


AREVA United Kingdom Yes
ISKRA MIS SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT
EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
TRANSDATA United States Yes

Total = 4

31 . 7 PROTECTIVE RELAYS
31. 7. 1 TRANSMISSION LINE PROTECTIVE RELAYS 380/132/115/110kV Applicable Standards:

Page 95 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB SWEDEN--- Yes Relay Type:
RED 670

Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6X0-D1
A-BA-XE

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
4CT+4VT+12BIs+12BOs
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
RED 670

Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6X0-D1
A-CA-XE

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Page 96 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

Hardware:
4CT+4VT+12BIs+12BOs
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
RED 670

Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6B6-D1
A-BA-XE

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
RED 670

Ordering code:
RED670*1.2-B32X00-B10B11B21C24P01-B1X-CB-KB-B-B6B6-D1
A-CA-XE

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N

Page 97 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 98 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Alstom United Kingdom--- Yes Relay Type:
MiCOM P546

Ordering Code:
P54631NH7M0710M

Built In Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
4CT+4VT+12BIs+12BOs
8CT+4VT+16BIs+16BOs
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
MiCOM P546

Ordering Code:
P54631NK7M0710M

Built In Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Page 99 of 169
METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

Hardware:
4CT+4VT+12BIs+12BOs
8CT+4VT+16BIs+16BOs
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 100 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
GE CANADA--- Yes Relay Type:
L90

Ordering code:
L90-K03-HKH-F8L-H6L-L6U-W7K(*)

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
4CT+4VT+12BIS+12BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
L90

Ordering code:
L90-K03-HKH-F8L-H6L-L6U-W73(*)

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:

Page 101 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
4CT+4VT+12BIS+12BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
L90

Ordering code:
L90-K05-HKH-F8L-H6L-L8N-N6D-S67-U67-W7K(*)

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
L90

Ordering code:
L90-K05-HKH-F8L-H6L-L8N-N6D-S67-U67-W73(*) (*) CH2 to be
attenuated to fit SDH

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision

Page 102 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 103 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SEL United States--- Yes Relay Type:
SEL 411L

Ordering code:
0411L1X6X1C7CDXH5C424XX

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
27/59/59N
50BF
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
SEL 411L

Ordering code:
0411L1X6X1C7CEXH5C424XX

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
27/59/59N
50BF
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
8CT+4VT+16BIS+16BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS

Page 104 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Siemens GERMANY--- Yes Relay Type:
7SD522

Ordering code:
7SD5221-5CB99-9HK0+L0S+M0H+N7A

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:
4CT+4VT+12BIS+12BOS
CH-1 1300nm, CH-2 850nm
IEC 61850,2-PORTS

Relay Type:
7SD522

Ordering code:
7SD5221-5CB99-9HK0+L0S+M0J+N7A

Built in Function:
87L(Dual Combined Slope)
21P&G(5 Zones,Quad+Mho+Bi)
67DEF with comm. Schem
79(2CBs OR 1CB controlled)+25
50/51PH&GR/SEF/46
67P/67N
49 Thermal overload
27/59/59N
50BF
74DC supply supervision
74 trip relay Coil Supervision
CT Supervision
60 VT Supervision
DFR/SOE /F locator

Hardware:

Page 105 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
4CT+4VT+12BIS+12BOS
CH-1 1550nm, CH-2 850nm
IEC 61850,2-PORTS
Total = 5

31. 7. 2 POWER TRANSFORMER PROTECTION RELAYS 380/132/115/110kV Applicable Standards:

Page 106 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB SWEDEN--- Yes Relay Type:
RED 670

Ordering code:
RET670*1.2-B30X00-A02D03E01P01-B1X-C-B-KB-B-B3B3-D1A-X
E

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE

Hardware:
2-WINDING:
14xCT(Ph)+4xCT(Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2-ports

Relay Type:
RET 670

Ordering code:
RET670*1.2-B40X00-A01A02D04E01P01-B1X-C-B-KB-B-B3B3-D1
A-XE

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O

Page 107 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE

Hardware:
3-WINDING:
14xCT(Ph)+4xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

Page 108 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Alstom Grid United Kingdom-Stafford Yes Relay Type:
MiCOM P 643

Ordering code:
P64332NA6M0040K

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instantaneous Diff
50/51PH&GR all windings
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC Supply Supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE

Hardware:
2-WINDING:
9xCT (Ph) + 4xCT (Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2-ports

Relay Type:
MiCOM P 643

Ordering code:
P64532NA6M0040K

Built in Functions:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instantaneous Diff
50/51PH&GR all windings
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24

Page 109 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
74 DC Supply Supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE

Hardware:
3-WINDING:
15xCT(Ph)+3xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

Page 110 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
GE Multilin CANADA-Markham Yes Relay Type:
T 60

Ordering code:
T60-K22-HKH-F8F-H6L-M8N-PXX-U8N-WXX

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE

Hardware:
2-WINDING:
15xCT(Ph)+5xCT(Gnd)
8xcontact inputs
4xcontact outputs
3-WINDING:
IEC 61850 2-ports

Relay Type:
T 60

Ordering code:
T60-K22-HKH-F8F-H6L-M8N-P6T-U8N-WXX

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24

Page 111 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
74 DC supply supervision.
74 Lockout coil supervision
CT Super (All windings)
60
DFR/SOE

Hardware:
3-WINDING:
15xCT(Ph)+5xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
SEL United States Yes Relay Type:
SEL487E

Ordering code:
0487E3X648XXC2X4H624XXX

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout coil supervision
60
DFR/SOE

Hardware:
2-WINDING:
8xcontact inputs
4xcontact outputs
3-WINDING:
15xCT(Ph)+3xCT(Gnd)
IEC 61850 2 ports

Page 112 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Siemens GERMANY--- Yes Relay Type:
7UT6

Ordering code:
7UT6331-5EB92-1BC1+L0S

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
CT Super (All windings)
60
DFR/SOE

Hardware:
2-WINDING:
9xCT(Ph)+4xCT(Gnd)
3-WINDING:
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

Relay Type:
7UT6

Ordering code:
7UT6351-5EB92-1BC1+L0S

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87 REF (High impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67P/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24

Page 113 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
74 DC supply supervision.
CT Super (All windings)
60
DFR/SOE

Hardware:
3-WINDING:
12xCT(Ph)+4xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports

Page 114 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ZIV SPAIN-Madrid Yes Relay Type:
IDV

Ordering code:
8IDVK4F22Z104SKL

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67N/67N(All windings)
27/59/25
81 U/O
50 BF
49T
24
74 DC supply supervision.
74 Lockout Coil Supervision.
CT Super (All windings)
60
DFR/SOE

Hardware:
2-WINDING:
9xCT(Ph)+2xCT(Gnd)
8xcontact inputs
4xcontact outputs
3-WINDING
IEC 61850 2 ports

Relay Type:
IDV

Ordering code:
8IDVD4F22Z904VKL

Built in Function:
87L (dual combined slope)
87 REF (low impedance)
87/50 Instan Diff
50/51PH&GR all windings.
67N/67N(All windings)
50 BF
49T
74 DC supply supervision.
74 Lockout Coil Supervision.
CT Super (All windings)
DFR/SOE

Page 115 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Hardware:
3-WINDING:
12xCT(Ph)+2xCT(Gnd)
16xcontact inputs
8xcontact outputs
IEC 61850 2 ports
Total = 6

31. 7. 3 Double BUS-BAR Single CB 132/115/110 kV Relays Applicable Standards:

Page 116 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB SWEDEN Yes Relay Type:
REB500 CU

Ordering code:
REB500-CU03-V76-S30-P0-B0-CA3-CB3

Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE

Hardware:
CU: 8BIs+8BOs
24 PU connected to CU
IEC 61850, 2-PORTS

Relay Type:
REB500 CU

Ordering code:
REB500-CU03-V76-S50-P0-B0-CA3-CB3

Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE

Hardware:
CU: 8BIs+8BOs
48 PU connected to CU
IEC 61850, 2-PORTS

Relay Type:
REB500 PU

Ordering code:
REB500-BU03-C2-A40-P0-F1-BB2-IO0-R0-OC0-BFP1-EFP1-PD0-
DR0-L0-T0+1MRB150073R0052

Built in Function:
50BF: stage1
50BF: stage2

Page 117 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
End fault protection with Interntrip or Dead Zone
HMI
DFR/SOE

Hardware:
PU: 4CT+16BIS+12BOS
Alstom United Kingdom--- Yes Relay Type:
MICOM P740 PU

Ordering code:
P74137NA6M0510K

Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage2
CT Supervision
Intertrip facility
Selective Zone tripping and blocking
HMI
DFR/SOE

Hardware:
CU: 8BIS+8BOS
24 PU connected to CU
IEC 61850, 2-PORTS

Relay Type:
MICOM P740

Ordering code:
P74331NA6M0510K

Built in Function:
50BF: stage1
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
HMI
DFR/SOE

Hardware:
PU: 4CT+16BIs+12BOS
IEC 61850, 2-PORTS

Page 118 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SIEMENS GERMANY-Berlin Yes Relay Type:
7SS52x CU

Ordering code:
7SS5220-4AB92-1CA0+L0R

Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE

Hardware:
CU: 8BIs+8BOs
24 PU connected to CU
IEC 61850, 2-PORTS

Relay Type:
7SS52x CU

Ordering code:
7SS5220-4AB92-1FA0+L0R

Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE

Hardware:
CU: 8BIs+8BOs
48 PU connected to CU
IEC 61850, 2-PORTS

Page 119 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Relay Type:
7SS52x PU

Ordering code:
7SS5231-5CA01-1AA1
*BO=6 with double contact

Built in Function:
87BB: Biased Current Differential high speed BBP with built in
check zone
50BF: stage1
50BF: stage2
CT Supervision
50/51 : Phase Over current Protection
50N/51N : Earth Fault
Intertrip facility
End fault protection with interntrip or Dead Zone
Selective Zone tripping and blocking
HMI
DFR/SOE

Hardware:
PU: 4CT+16BIs+12BOS
Total = 3

31. 7. 4 33kV Plain OH Feeder + UG + Incomer Relays Applicable Standards:

Page 120 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB SWEDEN Yes Relay Type:
REL 670

Ordering code:
REL670*1.2-A31X00-H07P01-B1X-AX-KB-B-B6X0-D1A-XX-XE

Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67P/67N
49 Thermal Overload
Phase unbalance 46
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
16 BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 121 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SEL United States--- Yes Relay Type:
SEL421

Ordering code:
04214611XC2X43224XXXX

Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
15BI+23 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 122 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SIEMENS GERMANY-Berlin Yes Relay Type:
7SA6x

Ordering code:
7SA6311-5BB92-2DM4+L0S
*with 20BI+09BO
**ONLY 67N

Built in Function:
Control & MIMIC
21 P&GD
50N/51 P&G
67N
49 Thermal Overload
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
16 BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
Total = 3

31. 7. 5 13.8kV Plain OH Feeder + UG + Incomer Relays Applicable Standards:

Page 123 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB FINLAND Yes Relay Type:
REF615

Ordering code:
HBFJAEAGNEA1BAA1XE

Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 124 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
GE Multilin SPAIN-- Yes Relay Type:
F650

Ordering code:
F650-NFD-F2G1-HI-6E

Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 125 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SCHNEIDER ELECTRIC (Telemecanique) FRANCE-- Yes Relay Type:
Sepam-80

Ordering code:
SEP888S84J33TNTLA
Along with Ordering Code, following optional modules needs to
be ordered..
1. MES120 (59715) #2 nos.
2. ACE850F0 interface module (59659) # 2 no.
3. ACE850 communication cable (CCA614) # 2 no.

Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
14BI+6 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 126 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SEL United States Yes Relay Type:
SEL-451

Ordering code:
04515611XC2X4H244XXXX

Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
16BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC

Page 127 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Siemens GERMANY--- Yes Relay Type:
7SJ64

Ordering code:
7SJ6411-5EB92-1FG1+L0S

Built in Function:
Control & MIMIC
50N/51 P&GD
67P/67N
49 Thermal Overload
Phase Unbalance 46
Undercurrent 37
27/59
Auto reclosure 79
50BF
Trip circuit Supervision 74TC
Inrush Blocking
Under/Over frequency 81
CT Supervision
60 (VT Fuse Supervision)
DFR/SOE

Hardware:
15BI+07 BO
3CT(Ph)+1CT(GD)+3VT
IEC 61850,2-PORTs FIBER OPTIC
Total = 5

31. 7. 6 13.8kV and 33kV Capacitor Bank Relays Applicable Standards:

Page 128 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ABB SWEDEN Yes Relay Type:
REC670

Ordering code:
1MRK 002 814-AC

Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE

Hardware:
6CT+6VT+16BIs+24BOs
IEC 61850,2-PORTS
GE Multilin CANADA-Markham Yes Relay Type:
C70

Ordering code:
C70-K03-HKH-F8N-H6D-M8V-P67-U6D-W67

Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE

Hardware:
6CT+6VT+16BIs+20BOs
IEC 61850,2-PORTS

Page 129 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SEL United States Yes Relay Type:
SEL487V

Ordering code:
0487V0X6111XC2X4H424XXX

Built in Function:
27P
50/51 P&G
Undercurrent
50_2
59B&59N
59_2
Harmonic Overload
60P&N
87V phase&neutral
67 P&G
67_2
60 VT Supervision
DFR/SOE

Hardware:
6CT+6VT+15BIs+23BOs
IEC 61850,2-PORTS
Total = 3

31. 7. 7 Tripping and Lockout Relay Applicable Standards:

Page 130 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Alstom United Kingdom--- Yes Relay Type:
MVAJ

Ordering code:
MVAJ101RA0802A

Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)

Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)

Note-Withdrawable from Case

Relay Type:
MVAJ

Ordering code:
MVAJ105RA0802A

Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)

Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)

Note-Withdrawable from Case

Page 131 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ELECTRO-SWITCH United States Yes Relay Type:
LOR

Ordering code:
LOR/HR-7810F

Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)

Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)

Relay Type:
LOR

Ordering code:
LOR/SR-7868FD

Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)

Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)

Page 132 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Siemens GERMANY--- Yes Relay Type:
TR

Ordering code:
TR241-7PG1524-1JC60-1AF0

Standard Specification :
Hand & Electrical Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)

Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)

Note-Withdrawable from Case

Relay Type:
TR

Ordering code:
TR212-7PG1521-2JC60-1AF0

Standard Specification :
Self Reset
High Burden
Flag indication, hand reset
Upto 10 contracts (in any configuration)(8 NO & 2 NC)
Standard Hand Reset Flag Available
Operating Time in ms. (10ms)

Contact Ratings:
(Make & Carry (3 sec))AC/DC: 7500VA/W with Max of 30A,300V
(Make & Carry (continuous))AC/DC: 1250VA/W with Max of
5A,300V
(Break) AC/DC: 1250VA/W with MAX of 5A,300V,DC 80w
Resistive,40w Inductive (L/R=0.04sec)

Note-Withdrawable from Case


Total = 3

Page 133 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
31. 7. 8 Short Cable - all voltage levels Applicable Standards:

ABB SWEDEN Yes Relay Type:


RED670

Ordering code:
RED670*1.2-B32X00-C24P02-B1X-C-B-KB-B-B6X0-D1AX-AAXXXX
-XE

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (6CT+6VT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 850nm, CH-2 850nm (up to 3km)
IEC 61850 -2 Ports

Relay Type:
RED670

Ordering code:
RED670*1.2-B32X00-C24P02-B1X-C-B-KB-B-B6X0-D1AX-BBXXXX
-XE

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (6CT+6VT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1310nm, CH-2 1310nm (up to 80km)
IEC 61850 -2 Ports

Page 134 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Alstom Grid United Kingdom-Stafford Yes Relay Type:
MiCOM P543

Ordering code:
P54331NA7M0610M

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (5CT+4VT)
Binary Inputs 16 Inputs
Binary Outputs 14
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports

Relay Type:
MiCOM P543

Ordering code:
P54331NC7M0610M
Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (5CT+4VT)
Binary Inputs 16 Inputs
Binary Outputs 14
CH-1 1300nm, CH-2 1300nm (up to 50km)
IEC 61850 -2 Ports

Page 135 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
GE CANADA--- Yes Relay Type:
L90

Ordering code:
L90-K03-HKH-F8L-H6G-L6T-N67-S67-W77

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports

Relay Type:
L90

Ordering code:
L90-K03-HKH-F8L-H6G-L6T-N67-S67-W2B

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports

Page 136 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
SEL United States Yes Relay Type:
SEL411L

Ordering code:
0411L1X6X1C7CCXH5C424XX (2KM)

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (6CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1km)
IEC 61850 -2 Ports

Relay Type:
SEL411L

Ordering code:
0411L1X6X1C7DDXH5C424XX (24KM)

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (6CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports

Page 137 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Siemens GERMANY--- Yes Relay Type:
7SD52

Ordering code:
7SD5221-5CB99-9CJ0+L0S+M0A+N0A

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 820nm, CH-2 820nm (up to 1.5km)
IEC 61850 -2 Ports

Relay Type:
7SD52

Ordering code:
7SD5221-5CB99-9CJ0+L0S+M0G+N0G

Built in Function:
Basied diff. Protection
Breaker Failure (50BF)
DC Supply Supervision
50/51+50N/51N
Current Circuit Supervision

Hardware:
Analog Inputs (3CT)
Binary Inputs 16 Inputs
Binary Outputs 24
CH-1 1300nm, CH-2 1300nm (up to 24km)
IEC 61850 -2 Ports
Total = 5

31 . 8 TERMINAL BLOCK
31. 8. 0 TERMINAL BLOCK Applicable Standards:

ENTRELEC FRANCE Yes


PHOENIX GERMANY Yes

Page 138 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
WEIDMULLER GERMANY Yes

Total = 3

31 . 9 FAULT RECORDERS
31. 9. 0 FAULT RECORDERS Applicable Standards:

AMETEK (ROCHESTER) United States Yes


QUALITROL HATHAWAY NORTHERN IRELAND Yes

Total = 2

31 . 10 DYNAMIC SYSTEM MONITORING EQUIPMENTS


31. 10. 0 DYNAMIC SYSTEM MONITORING EQUIPMENTS Applicable Standards: 38-TMSS-06

DIgSILENT GmbH GERMANY Yes


POWER TECHNOLOGY INC. (PTI) United States Yes
QUALITROL HATHAWAY NORTHERN IRELAND Yes Based on S&SD Letter 12-03055-01-30504401 dated August 26,
2012, it is pre-qualified for Dynamic System Monitoring (DSM) as
conforming to SEC Specification # 38-TMSS-06, Rev.0 with the
following conditions:

All Factory tests shall be carried out on the first batch of


Dynamic System Monitoring (DSM) as per 38-TMSS-06, Rev.0 in
the presence of three (3) SEC Engineers. All costs related to the
tests shall be borne by the manufacturer. This prequalification
requirement was confirmed by Qualitrol-Hathaway, Belfast North
Ireland U.K in writing through their letter # Nil dated July 27,
2012.

Ten (10) years extended warranty in respect of defects due to


design , manufacturing, installation and workmanship from the
date of PAC of the first turnkey project (in case of contract
award) or from the date of first delivery of direct material supply
order as confirmed by Qualitrol-Hathaway, Belfast North Ireland
U.K through their letter # Nil dated May 18, 2010.
Total = 3

32 METERS

32 . 1 KILOWATT HOUR METER (ENERGY METER)

Page 139 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
32. 1. 0 KILOWATT HOUR METER (ENERGY METER) Applicable Standards: 40-TMSS-02

ELSTER United States Yes PREVIOUSLY ABB (T &D)

Based on S&SD Letter 12-00932-1-30504401 dated March 25,


2012, it is pre-qualified for A3RAQ, A1860RALC and
A1860RAL meters as confirming to SEC Specification #
40-TMSS-02, Rev.0 with the following condition:

A3RAQ meters with configuration ZD3D44F00LD-16,


ZD3E44F00LD-16, ZD3D46000LD-16.
A1860RALC meters with configuration ZE3KM4CF5LK-EL.
A1860RAL meters with configuration ZE3KM4CF0LH-EL.
Free Supply of Meter Type A3RAQ: Five (5) Revenue Meters
Type A3RAQ shall be supplied free of cost to SEC as confirmed
through ELSTER letter # L1-ST12-001 dated January 21, 2012.
Five (5) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through ELSTER letter # NIL dated 12-01-2012.
GEC MEASUREMENT United Kingdom Yes
ISKRA MIS SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT
EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
SIEMENS GERMANY Yes
TYCO ELECTRONICS (UK) Ltd - CROMPTON United Kingdom-- Yes Based on TS&SD Letters (08-F00975/01-03032301 dated June
INSTRUMENTS 04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
(1530, 1540, &1630) are prequalified for Digital Metering
Devices (NOT FOR BULK ENERGY METERS) as confirming to SEC
Specification # 40-TMSS-02, Rev.0 with the following condition:

Five (05) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total = 5

32 . 2 AMMETER, VOLTMETER, MW, MVAR


32. 2. 0 AMMETER, VOLTMETER, MW, MVAR Applicable Standards: 40-TMSS-02

Page 140 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
AREVA FRANCE Yes
CELSA ITALY Yes
CEWE SWEDEN-- Yes
ENTES TURKEY-ISTANBUL Yes Based on TS&SD letter # 10-F2298/03-03032301 dated
02/10/2010, it is pre-qualified for Digital Ammeter type
(EPM-34) and Digital Voltmeter type (EVM-35) as conforming to
SEC specification # 40-TMSS-02, Rev.0 with the following
condition:

ENTES (Turkey) has agreed to give SEC a


Guarantee/Warranty on the proposed digital meters for a period
of two (02) years and eight (08) years (for maintenance) for
total of ten (10) years from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.
ISKRA MIS SLOVENIA-KRANJ Yes ACCEPTANCE SUBJECTED TO SUCCESSFUL PRODUCT
EVALUATION / ACCEPTANCE BY SEC CONCERNED END USER
DEPARTMENT FOR EACH PURCHASE ORDER / PROJECT
DURING TENDER/BIDDING STAGE.
SCHNEIDER ELECTRIC CANADA-- Yes DIGITAL POWER METERS TYPE ION 6200 (0.5% ACCURACY
CLASS); 10 YEARS EXTENDED WARRANTY
TYCO ELECTRONICS (UK) Ltd - CROMPTON United Kingdom-- Yes Based on TS&SD Letters (08-F00975/01-03032301 dated June
INSTRUMENTS 04, 2008), (10-F00230/01-03032301 dated February 03, 2010)
& (11-F03017/01-03032301 dated October 16, 2011). Integra
(1530, 1540, &1630) are prequalified for Digital Metering
Devices as confirming to SEC Specification # 40-TMSS-02, Rev.0
with the following condition:

Five (05) years extended warranty from the date of PAC of the
First turnkey project in case of contract award or date of the
First delivery in case of direct material supply order. This was
confirmed by TYCO Electronic UK through their letter #
INT-SEC-06 dated January 03, 2008 and its Amendment dated
November 21, 2011.
Total = 7

32 . 3 AUTOMATIC METER READING (AMR) SYSTEM


32. 3 AUTOMATIC METER READING (AMR) SYSTEM Applicable Standards: 40-TMSS-03

ADVANCE ELECTRONICS CO., LTD. Saudi Arabia-Riyadh Yes Based on approval of Executive Directive for TS&SD Letter #
08-1105-03032301 dated 20/10/2008, it is pre-qualified for
Energy Meters Type (ADDAD-4) & Quality Meters Type
(SEL-734).

Page 141 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ALps Technologies FRANCE-ANNECY-LE-VIEUX Yes Based on TS&SD letter# 09-F00181/03-03032301 dated 06th.
April 2009 with (5) years warranty from the date of PAC
Electro Industries / GaugeTech United States-New York Yes Based on S&SD Letter 13-00862/03-030504401 dated April 20,
2013, Electro Industries/ GaugeTech, New York, USA is
pre-qualified for Power Quality Meters type NEXUS 1500 as
conforming to National Grid SA specification # 40-TMSS-03,
Rev.0, with the following conditions:

Product Support: Continuous supply and product support of


Power Quality Meters type NEXUS 1500 to all SEC/National Grid
SA approved AMR Manufacturers for a minimum period of ten
(10) years shall be ensured as confirmed through their letter #
Nil dated January 01, 2012.

Product Demo: EIG Tech USA in coordination with their Local


Agent (Ideal Technical Solutions, Riyadh) shall demonstrate the
hardware and software capability and the features of NEXUS
1500 Power Quality Meters during the proposed Live Demo of
the AMR system to be conducted on the first order in presence
of SEC/National Grid SA Engineers as already confirmed through
item # 8 of ITS letter # L1-NG01-J13-006 dated February06,
2013.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award) or from the date
of first delivery of direct material supply order as confirmed by
Electro Industries /Gauge Tech -New York, USA through their
letter # L1-NG01-J13-004 dated January 29, 2013.
ELSTER United States Yes Based on S&SD Letter 12-00932-1-30504401 dated March 25,
2012, it is pre-qualified for A1884RALNC meters as confirming
to SEC Specification # 40-TMSS-03, Rev.0 with the following
conditions:

A1884RALNC meters with configuration ZE3KM4C4FLP-01


[ This Meter is approved for Revenue Meter Application only ].

Five (5) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through ELSTER letter # NIL dated 12-01-2012.

Page 142 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Ideal Technical Solutions (ITS) Saudi Arabia-Riyadh Yes Based on S&SD Letter 13-00971-1-30504401 dated May 15,
2013, it is pre-qualified for AMR system as conforming to
National Grid SA Specification # 40-TMSS-03, Rev.0 with the
following conditions:

Ten (10) years extended warranty from the date of PAC of the
first turnkey project (in case of contract award)or date of first
delivery in case of direct material supply order as confirmed
through Ideal Technical Solutions (ITS), KSA, Riyadh letter #
W1-NG01-J13-001 dated January 08, 2013 and L1-ST12-020
dated December 03, 2012.

System Demo: Live Demo of the AMR System will be


conducted in presence of SEC/National Grid SA Engineers on the
first system to be manufactured in SEP factory already confirmed
through item # 8 of letter # L1-NG01-J13-006, dated February
06, 2013.

ITS Integration & Test Facility: as per item# 3.a of ITS letter#
L1-NG01-J13-003 dated January 26, 2013.
Total = 5

33 CAPACITOR

33 . 1 SHUNT CAPACITOR
33. 1. 0 SHUNT CAPACITOR Applicable Standards: 43-TMSS-01

ABB SWEDEN Yes Based on TS&SD Letter # 10-00269-03032301 dated


24/01/2010, it is pre-qualified for Shunt Capacitor Banks as
confirming to SEC specification # 43-TMSS-01, rev.0 with the
following condition:

Seven (7) years warranty from the date of PAC of the turnkey
project in case of contract award or date of delivery in case of
direct material supply order.
ALSTOM Grid Ltd. FINLAND-Tampere Yes Previously " Nokian Capacitors Ltd. Finland", the name has
been changed to Areva T&D Ltd. Finland based on TS&SD/ESD
Letter # 10-00145-03032301 dated January 16, 2010 and Areva
T&D Ltd.-Finland Letter # Nil dated January 04, 2010, then the
name has been changed again to ALSTOM Grid Ltd. Finland
based on Dept Mgr, S&SD E-mail dated February 26, 2012 and
ALSTOM Grid Ltd. letter # RN-2012-02-18 dated February 18,
2012.
COOPER (MCGRAW-ED) United States Yes

Page 143 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
General Electric Energy-CPQP United States-New York Yes Based on TS&SD fax ref.#08-F0623/01-03032301 dated
02/12/2008.
Pre-Qualified for Capacitor Bank (13.8kV through 380kV) with
this conditions:
-First batch shall be type test in an independent laboratory in
presence of (3) SEC engineers & (1) independent inspector.
-(10) years warranty
SAMWAH CAPACITOR CO. Ltd KOREA, Republic of-Yongin-Si, Yes Based on TS&SD Letter # 11-02016/01-03032301 dated
06/07/2011, it is pre-qualified for Substation Type 13.8kV to
36kV Only Shunt Capacitor Banks as confirming to SEC
specification # 43-TMSS-01, Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first batch of
each type of capacitor bank (Substation Type 13.8kV to 36kV
Only Shunt Capacitor Banks) in case of securing an order in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector in an independent
testing laboratory. All the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by
SAMWAHA through letter # Nil dated 12/03/2010.

Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by
SAMWAHA through letter # Nil dated 12/03/2010.
VISHAY ELECTRONICS CZECH REPUBLIC-BLATNA Yes Based on TS&SD Letter # 10-F01787/03-03032301 dated
18/08/2010, it is pre-qualified for Shunt Capacitor Banks as
confirming to SEC specification # 43-TMSS-01, Rev.0 with the
following condition:

Ten (10) years extended warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order. This was confirmed by the
manufacturer as per submitted guaranty/warranty certificated
dated 28/05/2010G.
Total = 6

34 ELECTRONIC COMPONENTS

34 . 1 MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS


34. 1. 0 MODULAR PHOTOVOLTAIC POWER SUPPLY SYSTEMS Applicable Standards:

NEST OY/NAPS FINLAND Yes

Total = 1

Page 144 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
35 INSTRUMENT TRANFORMERS

35 . 1 33 & 34.5 KV CTS


35. 1. 0 33 & 34.5 KV CTS Applicable Standards: 50-TMSS-01

ABB ( T& D) United States-N/A Yes


ABB EJF CZECH REPUBLIC Yes
Electrotecnica Arteche SPAIN-Mungia Yes Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 33 kV & 34.5 kV Current
Transformers (CTs) as confirming to SEC Specification #
50-TMSS-01 Rev.0 with the following conditions:

All Type, Routine and Special testes shall be carried out on


the first batch of 33 kV & 34.5 kV Current Transformers (CTs) kV
in an Independent Testing Laboratory in the presence of three
(3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G.

The complete tests in one (1) sample of Nynas Nytro 10 XN


Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.

Ten (10) years extended warranty from the date of PAC of


the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
GE United States Yes
KONCAR INSTRUMENT TRANSFORMERS INC. Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.
KUHLMAN ELECTRIC CORPORATION United States Yes RING/SPLIT CORE TYPE
KWK MESWANDLER GERMANY Yes RING TYPE

Page 145 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
MEMF Saudi Arabia-RIYADH Yes TS&SD letter# 09-00918-03032301 dated 29 March 2009 it is
prequalified for CT up to 36kV with the following conditions:
TYPE TEST SHALL BE DONE AT AN INTL. TESTING LAB IN
PRESENCE OF 3RD PARTY INSPECTOR;
EXTENDED GUARANTEE/ WARRANTY FOR 10 YEARS FROM
PAC.
PFIFFNER SWITZERLAND Yes RING/SPLIT CORE TYPE
SADTEM FRANCE Yes RING/SPLIT CORE TYPE & BLOCK TYPE CTs UP TO 36kV.
SIEMENS United States Yes .
STE ITALY Yes RING/SPLIT CORE TYPE

Total = 12

35 . 2 69KV CTS
35. 2. 0 69KV CTS Applicable Standards: 50-TMSS-01

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
E. PFIFFNER SWITZERLAND Yes

Page 146 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Electrotecnica Arteche SPAIN-Mungia Yes Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 69 kV Current Transformers
(CTs) as confirming to SEC Specification # 50-TMSS-01 Rev.0
with the following conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of 69 kV Current Transformers (CTs) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated April 28, 2011G.

The complete tests in one (1) sample of Nynas Nytro 10 XN


Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
GE United States Yes
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
KONCAR INSTRUMENT TRANSFORMERS INC. Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.
KUHLMAN ELECTRIC CORPORATION United States Yes RING/SPLIT CORE TYPE
KWK MESWANDLER GERMANY Yes RING TYPE
NISSIN JAPAN Yes .
PFIFFNER SWITZERLAND Yes RING/SPLIT CORE TYPE
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
SADTEM FRANCE Yes RING/SPLIT CORE TYPE
SIEMENS United States Yes .

Page 147 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
STE ITALY Yes RING/SPLIT CORE TYPE
TRENCH ITALIA ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL
TYPE
Total = 19

35 . 3 110 - 132 KV CTS


35. 3. 0 110 - 132 KV CTS Applicable Standards: 50-TMSS-01

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
Electrotecnica Arteche SPAIN-Mungia Yes Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 110 132 kV Current
Transformers (CTs) as confirming to SEC Specification #
50-TMSS-01 Rev.0 with the following conditions:

All Type, Routine and Special testes shall be carried out on the
first batch of 110 132 kV Current Transformers (CTs) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated April 28, 2011G.

The complete tests in one (1) sample of Nynas Nytro 10 XN


Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.

Ten (10) years extended warranty from the date of PAC of


the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes

Page 148 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
KONCAR INSTRUMENT TRANSFORMERS INC. Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.
KUHLMAN ELECTRIC CORPORATION United States Yes RING/SPLIT CORE TYPE
KWK MESWANDLER GERMANY Yes RING TYPE
NISSIN JAPAN Yes .
PFIFFNER SWITZERLAND Yes RING/SPLIT CORE TYPE
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
SADTEM FRANCE Yes RING/SPLIT CORE TYPE
STE ITALY Yes RING/SPLIT CORE TYPE
TRENCH ITALIA ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL
TYPE
Total = 16

35 . 4 230KV CTS
35. 4. 0 230KV CTS Applicable Standards: 50-TMSS-01

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
KUHLMAN ELECTRIC CORPORATION United States Yes RING/SPLIT CORE TYPE
KWK MESWANDLER GERMANY Yes RING TYPE
NISSIN JAPAN Yes .
PFIFFNER SWITZERLAND Yes RING/SPLIT CORE TYPE
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
SADTEM FRANCE Yes RING/SPLIT CORE TYPE
STE ITALY Yes RING/SPLIT CORE TYPE
TRENCH ITALIA ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL
TYPE

Page 149 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 14

35 . 5 380KV CTS
35. 5. 0 380KV CTS Applicable Standards: 50-TMSS-01

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
KUHLMAN ELECTRIC CORPORATION United States Yes RING/SPLIT CORE TYPE
KWK MESWANDLER GERMANY Yes RING TYPE
NISSIN JAPAN Yes .
PFIFFNER SWITZERLAND Yes Based on TS&SD letter# 09-01105-03032301 dated 24th June
2009, it is pre-qualified for CT & CVT rated up to 380kV as
confirming to SEC specification # 50-TMSS-01, rev.0 & #
50-TMSS-02, rev.0 respectively with the following conditions:
All type, routine & special tests including the load test shall
be carried out on the first batch to be supplied to SEC in
securing an order in an independent testing laboratory in the
presence of three (3) SEC engineers & one (1) approved
independent inspection agency Inspector.
Ten (10) years warranty from the date of PAC of the
turnkey project in case of contract award or date of delivery in
case of direct material supply order.
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
SADTEM FRANCE Yes RING/SPLIT CORE TYPE
STE ITALY Yes RING/SPLIT CORE TYPE
TRENCH ITALIA ITALY-N/A Yes PREVIOUSLY AS VA TECH (NOUVA MAGRINI GALILEO); OIL
TYPE
Total = 14

36 POTENTIAL TRANSFORMER

36 . 1 33 & 34.5 KV POTENTIAL TRANSFORMERS

Page 150 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
36. 1. 0 33 & 34.5 KV POTENTIAL TRANSFORMERS Applicable Standards: 50-TMSS-03

ABB ( T& D) United States-N/A Yes


ABB EJF CZECH REPUBLIC Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
E. PFIFFNER SWITZERLAND Yes
Electrotecnica Arteche SPAIN-Mungia Yes Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 33 kV & 34.5 kV Potential
Transformers (PT) as confirming to SEC Specification
#50-TMSS-03 Rev.0 with the following conditions:

All Type, Routine and Special testes shall be carried out the
complete tests in one (1) sample of Nynas Nytro 10 XN Mineral
Oil on the first batch of 33 kV & 34.5 kV Potential Transformers
(PT) in an Independent Testing Laboratory in the presence of
three (3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G.

The complete tests in one (1) sample of Nynas Nytro 10 XN


Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
GE United States Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
KONCAR INSTRUMENT TRANSFORMERS INC. Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.

Page 151 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
MEMF Saudi Arabia-RIYADH Yes Based on S&SD Letter 12-00694-030504401 dated March 03,
2012. It is prequalified for Medium Voltage Resin Cast Indoor,
Potential Transformers with the following conditions:

This approval is restricted to Resin Cast, Indoor Potential


Transformers with accuracy class including 0.5/3P (0.5%) rated
up to 36kV. Any other accuracy class including 0.2/3P (0.2%)
will be considered only after submitting Type Test Reports
(acceptable to the Company) from Independent Laboratory as
confirmed by MEMF through Letter # NIL dated February 13,
2012.
Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or the date of first
delivery in case of direct material supply order. This was
confirmed in writing by the manufacturer through their letter #
Nil dated October 24, 2011.
NISSIN JAPAN Yes
SADTEM FRANCE Yes BLOCK TYPE PTs UP TO 36kV.
SIEMENS GERMANY Yes

Total = 14

36 . 2 69 KV POTENTIAL TRANSFORMERS
36. 2. 0 69 KV POTENTIAL TRANSFORMERS Applicable Standards: 50-TMSS-03

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
E. PFIFFNER SWITZERLAND Yes

Page 152 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Electrotecnica Arteche SPAIN-Mungia Yes Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 69 kV Potential Transformers
(PT) as confirming to SEC Specification #50-TMSS-03 Rev.0 with
the following conditions:

All Type, Routine and Special testes shall be carried out the
complete tests in one (1) sample of Nynas Nytro 10 XN Mineral
Oil on the first batch of 69 kV Potential Transformers (PT) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated April 28, 2011G.

The complete tests in one (1) sample of Nynas Nytro 10 XN


Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.

Ten (10) years extended warranty from the date of PAC of


the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
KONCAR INSTRUMENT TRANSFORMERS INC. Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.
NISSIN JAPAN Yes
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
Total = 11

36 . 3 110 - 132 KV POTENTIAL TRANSFORMERS


36. 3. 0 110 - 132 KV POTENTIAL TRANSFORMERS Applicable Standards: 50-TMSS-02,50-TMSS-03

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes

Page 153 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
Electrotecnica Arteche SPAIN-Mungia Yes Based on S&SD Letter 12-03192-02-30504001 dated February
19, 2012, it is pre-qualified for 110 132 kV Potential
Transformers (PT) as confirming to SEC Specification #
50-TMSS-03 Rev.0 with the following conditions:

All Type, Routine and Special testes shall be carried out the
complete tests in one (1) sample of Nynas Nytro 10 XN Mineral
Oil on the first batch of 110 132 kV Potential Transformers
(PT) in an Independent Testing Laboratory in the presence of
three (3) SEC Engineers & one (1) SEC approved Independent
Inspection Agency (IIA) Inspector. All costs of which shall be
borne by the manufacturer. This was confirmed by the
manufacturer through their letter # Nil dated April 28, 2011G.

The complete tests in one (1) sample of Nynas Nytro 10 XN


Mineral Oil shall be carried on the first batch of CVTs, CTs or
VTs (whichever is supplied first to SEC Project) in an
Independent Testing Laboratory in the presence of three (3) SEC
Engineers & one (1) SEC approved Independent Inspection
Agency (IIA) Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed by the manufacturer through
their letter # Nil dated October 07, 2011G.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Electrotecnica Arteche letter # NIL dated January 11,
2010 G.
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
KONCAR INSTRUMENT TRANSFORMERS INC. Croatia/Hrvatska-- Yes All Type, Special, Routine tests per SEC Standards and IEC to be
performed at KONCAR-Electrical Institute Inc. as independent
and accredited testing laboratory. Extended guarantee/warrenty
for 10 years.
NISSIN JAPAN Yes

Page 154 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
PFIFFNER Instrument Transformers Ltd SWITZERLAND-Hirschthal Yes Based on TS&SD letter # 11-01326-02-03032301 dated
04/12/2011, it is pre-qualified for Inductive Voltage
Transformers from 110kV up to 230kV as confirming to SEC
specification # 50-TMSS-03, Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first unit of
Inductive Voltage Transformers to be supplied to SEC in case of
securing an order in the presence of three (3) SEC Engineers &
one (1) approved independent inspection agency Inspector in an
independent testing laboratory or at the manufacturers testing
laboratory. All the related costs for witnessing the tests will be
borne by the manufacturer. This was confirmed by PFIFFNER
Instrument Transformers Ltd through letter # P/900-17052011
dated 17 May 2011.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
PFIFFNER Instrument Transformers Ltd through letter # P/900-
25112010 dated 22 March 2011.
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
Total = 11

36 . 4 230 KV POTENTIAL TRANSFORMERS


36. 4. 0 230 KV POTENTIAL TRANSFORMERS Applicable Standards: 50-TMSS-02,50-TMSS-03

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
MESWANDLER GERMANY Yes
NISSIN JAPAN Yes

Page 155 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
PFIFFNER Instrument Transformers Ltd SWITZERLAND-Hirschthal Yes Based on TS&SD letter # 11-01326-02-03032301 dated
04/12/2011, it is pre-qualified for Inductive Voltage
Transformers from 110kV up to 230kV as confirming to SEC
specification # 50-TMSS-03, Rev.0 with the following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards shall be carried out on the first unit of
Inductive Voltage Transformers to be supplied to SEC in case of
securing an order in the presence of three (3) SEC Engineers &
one (1) approved independent inspection agency Inspector in an
independent testing laboratory or at the manufacturers testing
laboratory. All the related costs for witnessing the tests will be
borne by the manufacturer. This was confirmed by PFIFFNER
Instrument Transformers Ltd through letter # P/900-17052011
dated 17 May 2011.

Ten (10) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
PFIFFNER Instrument Transformers Ltd through letter # P/900-
25112010 dated 22 March 2011.
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
Total = 10

36 . 5 380 KV POTENTIAL TRANSFORMERS


36. 5. 0 380 KV POTENTIAL TRANSFORMERS Applicable Standards: 50-TMSS-02,50-TMSS-03

ABB SWEDEN Yes


ABB ( T& D) United States-N/A Yes
ALSTOM (T & D) BALTEAU SA (NV) BELGIUM Yes
AREVA United Kingdom Yes
HAEFELY-TRENCH ELECTRIC SWITZERLAND Yes
HAEFELY-TRENCH ELECTRIC FRANCE Yes
NISSIN JAPAN Yes
RITZ United States Yes Type test required in first supply;10 Years Warranty from the
date of PAC is required.
Total = 8

37 INSULATING OIL

Page 156 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

37 . 1 MINERAL OIL FOR ELECTRICAL APPARATUS


37. 1. 1 MINERAL OIL FOR ELECTRICAL APPARATUS Applicable Standards: 54-TMSS-01

* --- Yes CT, PT, POWER TRANSFORMER MANUFACTURERS CAN


PROCURE OIL MEETING ALL THE REQUIREMENTS OF
APPLICABLE STANDARD FROM ANY REPUTED OIL
MANUFACTURERS.
APAR INDUSTRIES LTD INDIA-RABLE-NEW MUMBAI Yes Based on TS&SD letter # 11-00152-1-03032301 dated
22/01/2011, it is pre-qualified for Uninhibited Naphthenic
Mineral Insulating Oil type POWEROIL TO 1020 (60U) as
conforming to SEC specification # 54-TMSS-01, Rev.01 with the
following condition:
Five (5) years extended warranty from the date of PAC of
the turnkey project in case of contract award or date of delivery
in case of direct material supply order.
CHEMTRADE/MOBIL OIL CO. LTD. Saudi Arabia-YANBU Yes
NYNAS SWEDEN Yes
PETROMIN CORPORATION (Petrolube) Saudi Arabia-Jeddah Yes Previously "PETROLUBE", the name has been change to
PETROMIN CORPORATION (Petrolube) - Saudi Arabia based on
PETROMIN CORPORATION letter # Nil dated 30/06/2010.
SAVITA INDIA Yes
SHELL FRANCE Yes

Total = 7

37 . 2 INSULATING OIL FOR LOW PRESSURE OIL FILLED (LPOF) CABLES


37. 2. 0 INSULATING OIL FOR LOW PRESSURE OIL FILLED (LPOF) CABLES Applicable Standards:

ATOFINA CHEMICALS United States Yes


DIELECTRIC SYSTEM INC. United States Yes
FURAKAWA CABLES JAPAN-FUJIKURA Yes
INDOPOL FRANCE-LAVERA Yes
SIEMENS GERMANY Yes

Total = 5

39 TELECOMMUNICATION EQUIPMENT

39 . 1 FIBER OPTIC COMMUNICATION TERMINAL EQPT.

Page 157 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
39. 1. 0 FIBER OPTIC COMMUNICATION TERMINAL EQPT. Applicable Standards: 48-TMSS-06

ABB SWEDEN Yes


ABB SWITZERLAND Yes Based on TADD letter# 09-0576-030225, SCADA letter#
SOCW/DIV/97 and Telecomunication Dep. letter#
09-136-03040001.
ALCATEL FRANCE Yes

Page 158 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Alcatel-Lucent-ShangHai Bell Alcatel Co.Ltd- CHINA-ShangHai Yes Based on TS&SD letter #10-03519/03-03032301 dated
(ASB) 17/04/2011, it is pre-qualified for Fiber Optic Communication
Terminal type Optenix1660SM with the following conditions:

The first batch of each type of Optenix 1660SM to be


supplied to SEC shall be Type/Special & Routine/Sample tested
in an independent testing laboratory in the presence of three (3)
SEC engineers & one (1) SEC approved independent inspection
agency Inspector and all cost pertaining to the tests shall be
borne by Manufacturer. This was confirmed in writing by the
Alcatel-Lucent (ASB)-China through letter # ALU/172/SI/2010
dated 12/12/2010.

Ten (10) years extended warranty for the offered Optenix


1660SM from the date of PAC of the first turnkey project in case
of contract award or date of first delivery in case of direct
material supply order. This was confirmed in writing by A by the
Alcatel-Lucent (ASB)-China through letter # ALU/170/SI/2010
dated 12/12/2010.

Alcatel-lucent (ASB)-China has confirmed that after the


successful resolution of the prequalification process,
configuration as well as the drawings and details of the Trial Link
to be installed in SEC Network shall be submitted for SEC review
and approval. The places and dates of Trail Link installation will
be sent to the manufacturer.

-----------------------------------------------------------------------

Based on TS&SD letter # 11-03458/02-03032301 dated


03/12/2011, it's prequalified for Fiber Optics Terminal Equipment
1511MAX Series conforming to SEC Specification # 48-TMSS-06
Rev.0 with the following conditions:

Type, Special, sample & routine tests shall be conducted on


the first batch of 1511MAX Series to be supplied to SEC, in the
presence of three (3) SEC Engineers & one (1) SEC approved
independent inspection agency Inspector in an independent
testing laboratory. All the related costs for witnessing the tests
will be borne by the manufacturer. This was confirmed by Alcatel
Lucent (ASB) Shanghai China through response letter #
ALU/25/SI/2011 dated 30/01/2011 and letter # Nil dated
27/04/2011.

Ten (10) years extended warranty from the date of PAC of


the first turnkey project in case of contract award or date of first
delivery in case of direct material supply order. This was
confirmed by Alcatel Lucent (ASB) Shanghai China through
letter # Nil dated 30/01/2011.

Page 159 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Alcatel-lucent (ASB)-China has confirmed that after the
successful resolution of the prequalification process,
configuration as well as the drawings and details of the Trial Link
to be installed in SEC Network shall be submitted for SEC review
and approval. The places and dates of Trail Link installation will
be sent to the manufacturer.
Amwaj Telecommunication Manufacturing Co. Saudi Arabia-Riyadh Yes Based on TS&SD letter # 11-F01302/03-03032301 dated
28/05/2011, it is prequalified for Telecommunication & Fiber
Optic Passive Products (Frame, Box, Rack, etc.) with the
following conditions:

All type, special, routine and sample tests as per SEC


specifications/standards
for Telecommunication & Fiber Optic Passive Products (Frame,
Box, Rack, etc.), shall be carried out in case of contract award or
SEC direct purchase order at SEC approved independent
laboratory in presence of three (3) SEC Engineers and one (1)
SEC approved independent inspection agency. All the related
costs for witnessing of the tests will be borne by the
manufacturer. This was confirmed by Amwaj Telecom MFG. Co.
letter dated 09/06/2010.

Seven (7) years extended warranty from the date of PAC of


the turnkey project in case of contract award or date of delivery
in case of direct material supply order. This was confirmed by
Amwaj Telecom MFG. Co. letter dated 09/06/2010.
AT & T (LUCENT TECHNOLOGIES) United States Yes
FUJITSU JAPAN Yes
GE Industrial System CANADA-Ontario Yes Based on TADD letter# 09-0297-030225 dated 28th March
2009; (Note: GE Industrial System, Canada has bought only the
Lentronics business from Nortel, Canada that manufactures
TN1U SHD Fiber Optic Terminal Equipment and MUX)

Page 160 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HUAWEI TECHNOLOGIES CO.LTD. CHINA-Shenzhen Yes Based on TS&SD Letter # 10-F01736/02-03032301 dated
18/08/2010, it is pre-qualified for Communication Transmission
Equipment (OSN Series:1500,2500,3500,7500,9500 and
iManager T2000NMS) with the following conditions:

All type/design, special & routine tests (for the first batch of
proposed Communication Transmission Equipment (OSN Series
and NMS) to be supplied to SEC shall be conducted in an
independent testing laboratory in the presence of three (3) SEC
engineers & one (1) SEC approved independent inspection
agency Inspector, the relevant cost of which shall be borne by
manufacturer. This was confirmed by the manufacturer as per
Huawei letter # 70917174/MRK/SEC dated 26/04/2010G.

Ten (10) years extended warranty for the proposed


Communication Transmission Equipment (OSN Series and NMS)
from the date of PAC of the turnkey project in case of contract
award or date of delivery in case of direct material supply order.
This was confirmed by the manufacturer as per Huawei letter #
70917174/MRK/SEC dated19/02/2008G.
NIPPON ELECTRIC CO. LTD. JAPAN-TOKYO Yes
NOKIA FINLAND Yes
NORTEL CANADA Yes
PHILIPS HOLLAND Yes
SIEMENS GERMANY Yes
TELETTRA FRANCE Yes

Total = 15

39 . 2 FIBER OPTIC LOW DENSITY EQPT.


39. 2. 0 FIBER OPTIC LOW DENSITY EQPT. Applicable Standards:

ABB INFOCOM LTD. FRANCE-TURGI Yes


LICOM United States Yes
PRISM CANADA Yes
SIEMENS GERMANY Yes

Total = 4

39 . 3 POWER LINE CARRIER EQPT.

Page 161 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
39. 3. 0 POWER LINE CARRIER EQPT. Applicable Standards:

ABB SWEDEN Yes


ABB INFOCOM LTD. FRANCE-TURGI Yes
AREVA FRANCE Yes
GENERAL ELECTRIC CO. United States-LYNCHBURG, Yes
NERA NORWAY Yes
SIEMENS GERMANY Yes

Total = 6

39 . 4 TELE PROTECTION SYSTEM (TPS)


39. 4. 0 TELE PROTECTION SYSTEM (TPS) Applicable Standards:

ABB SWEDEN Yes


AREVA FRANCE Yes
DIMAT SPAIN-Barcelona Yes Based on TS&SD Letters# 09-01439-2-03032301 dated 7th July
2009 & 10-00845-1-03032301 dated April 04, 2010. It is pre-
qualified for Tele-protection Equipment type TPU-1 with the
following conditions:
Five (5) years Extended Warranty.
SIEMENS GERMANY Yes

Total = 4

39 . 5 CABLE ISOLATION EQPT.


39. 5. 0 CABLE ISOLATION EQPT. Applicable Standards:

POSITRON INDUSTRIES CANADA-MONTREAL Yes

Total = 1

39 . 6 PABXS TELEPHONE SETS, COMMUNICATION CABLES AND ACCESSORIES


39. 6. 1 CABLING ACCESSORIES Applicable Standards:

RAYCHEM United States-CA Yes

Total = 1

Page 162 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
39. 6. 2 PABXS TELEPHONE SETS, COMMUNICATION CABLES AND ACCESSORIES Applicable Standards:

ALCATEL NV FRANCE-PARIS Yes


AT & T United States-NEW YORK Yes
NORTHERN TELECOM CANADA Yes
PHILIPS HOLLAND Yes
SIEMENS GERMANY Yes

Total = 5

39. 6. 3 PABXS TELEPHONE SETS, KEY SYSTEMS Applicable Standards:

MITEL CORP. CANADA Yes

Total = 1

39. 6. 4 TELEPHONE EQUIPMENT PABXS AND ACCESSORIES Applicable Standards:

ERICSON SWEDEN Yes

Total = 1

39 . 7 VF INTERFACE EQPT.
39. 7. 0 VF INTERFACE EQPT. Applicable Standards:

ABB INFOCOM LTD. SWITZERLAND-TURGI Yes


TELLABS INC. United States-N/A Yes

Total = 2

39 . 8 DC POWER SYSTEMS
39. 8. 0 DC POWER SYSTEMS Applicable Standards:

EXIDE CORP. United States-PA Yes


HARMER & SIMMONS United Kingdom-ESSEX Yes
LORAIN PRODUCTS INTERNATIONAL SALES United States-LOARIN Yes
SAFT POWER SYSTEMS SAS FRANCE Yes Previously SAFT-NIFE

Total = 4

Page 163 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

39 . 9 TEST EQUIPMENT
39. 9. 0 TEST EQUIPMENT Applicable Standards:

ACTERNA United States Yes


ANDO ELECTRIC CO. LTD JAPAN-TOKYO Yes
HEWLETT PACKARD CO. United States Yes
IFR United States-N/A Yes
PHILIPS United Kingdom-CAMBRIDGE Yes
ROHDE & SCHWARZ GERMANY-N/A Yes
TREND SPAIN Yes
WANDEL & GOLTERMAN GMBH CO. WEST GERMANY Yes

Total = 8

39 . 10 TEST EQUIPMENT (FIBER OPTIC RELATED)


39. 10. 0 TEST EQUIPMENT (FIBER OPTIC RELATED) Applicable Standards:

ANRITSU CORPORATION JAPAN-TOKYO Yes

Total = 1

39 . 11 TEST EQUIPMENT (RADIO RELATED)


39. 11. 0 TEST EQUIPMENT (RADIO RELATED) Applicable Standards:

BIRD United States-SOLON Yes


MARCONI United Kingdom-N/A Yes

Total = 2

39 . 12 TEST EQUIPMENT (RADIO/PAGING RELATED)


39. 12. 0 TEST EQUIPMENT (RADIO/PAGING RELATED) Applicable Standards:

NEC United States Yes

Total = 1

Page 164 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC

39 . 13 RADIO/PAGING EQUIPMENT (MOBILE FIXED)


39. 13. 0 RADIO/PAGING EQUIPMENT (MOBILE FIXED) Applicable Standards:

ELECTRONIA Saudi Arabia-AL-KHOBAR Yes


GE/ERICSON United States-N/A Yes
GLENAYRE CANADA- BC Yes
KENWOOD United States-CALIFORNIA Yes
MOTOROLA United States-SCHAMBURG IL Yes
NEC United States Yes
NOKIA FINLAND Yes
PHILIPS United Kingdom-CAMBRIDGE Yes

Total = 8

39 . 14 RADIO/PAGING EQUIPMENT (ACCESSORIES)


39. 14. 0 RADIO/PAGING EQUIPMENT (ACCESSORIES) Applicable Standards:

ALLEN United States-DALLAS TEXAS Yes


ANDREW United States- IL Yes
ANTENNA SPECIALIST (AS) United States- DALLAS TEXAS Yes
CELWAVE United States Yes
DECIBEL United States-DALLAS TEXAS Yes
FLEXWELL United States-N/A Yes
JAYBEAM United Kingdom- NORTHAMPTON Yes
RADIO SPARES (RS) United Kingdom-NORTHANTS Yes

Total = 8

39 . 15 UHF RADIO
39. 15. 0 UHF RADIO Applicable Standards:

ALCATEL FRANCE Yes


ASCOM United Kingdom Yes
SIMOCO United Kingdom Yes

Page 165 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
Total = 3

39 . 16 HIGH DIGITAL SUBSCRIBER LINE (HDSL)


39. 16. 0 HIGH DIGITAL SUBSCRIBER LINE (HDSL) Applicable Standards:

ABB SWEDEN Yes


NOKIA FINLAND Yes .
NORTEL CANADA Yes .

Total = 3

39 . 17 PAX (TELEPHONE EXCHANGE)


39. 17. 0 PAX (TELEPHONE EXCHANGE) Applicable Standards:

ALCATEL FRANCE Yes


NORTEL CANADA Yes
SIEMENS GERMANY Yes

Total = 3

40 FIRE PROTECTION SYSTEM

40 . 1 FM 200 SYSTEM
40. 1. 1 GAS CYLINDERS & ACCCESSORIES Applicable Standards:

DUEPOINT United States Yes


GREAT LAKES United States Yes

Total = 2

40. 1. 2 EQUIPMENT Applicable Standards:

Yes Based on TS&SD Letter # 10-2425/02-03032301 dated


31/08/2010, it is pre-qualified for HFC227ea system (FM 200) as
confirming to SEC specification # TES-B-106.05.
ANSUL United States Yes LOCAL AGENT AL-BILAD
CHEMETRON United States Yes LOCAL AGENT HEBA
FENWAL United States Yes LOCAL AGENT ENERGY HOUSE

Page 166 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
FIGGIE United States Yes
FIKE United States Yes
FIREATER United States Yes
HYGOOD United States Yes
KIDDE United States Yes
Minimax GERMANY-Bad Oldesloe Yes Based on S&SD Letter 12-02704-02-30504001 dated February
19, 2012. It is pre-qualified for Fire Protective Signaling Panel as
conforming to SEC Specification # 90-TMSS-01 Rev.0 with the
following condition:

All Type, Routine and Special testes shall be carried out on the
first batch of Fire Protective Signaling Panel in an Independent
Testing Laboratory in the presence of three (3) SEC Engineers &
one (1) SEC approved Independent Inspection Agency (IIA)
Inspector. All costs of which shall be borne by the
manufacturer. This was confirmed in writing by the
manufacturer through their letter # Nil dated January 09, 2011.

Ten (10) years extended warranty from the date of PAC of the
first turnkey project in case of contract award or date of first
delivery in case of direct material supply order as confirmed
through Minimax-Germany letter # NIL dated January 09, 2011.
Siemens Building Technologies United States-Buffalo Grove Yes Based on TS&SD Letter # 10-2425/02-03032301 dated
31/08/2010, it is pre-qualified for HFC227ea system (FM 200) as
confirming to SEC specification # TES-B-106.05, Rev.0
Total = 11

40 . 2 WATER SPRAY SYSTEM


40. 2. 1 DELUGE VALVE, SPRAY NOZZLE, ALARM VALVE AND SPRINKLERS Applicable Standards:

GRINNEL United States Yes


RELIABLE United States Yes LOCAL AGENT AL-BILAD
SPRAYSAFE United States Yes
VIKING United States Yes LOCAL AGENT AL-BILAD
WATTS United States Yes

Total = 5

40 . 3 CARBON DIOXIDE (CO2) SYSTEM

Page 167 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
40. 3. 1 GAS CYLINDERS & ACCCESSORIES Applicable Standards:

CARDOX United States Yes LOCAL AGENT HEBA


CHEMETRON United States Yes LOCAL AGENT HEBA
FIKE United States Yes ...
HYGOOD United States Yes
KIDDE United States Yes LOCAL AGENT ENERGY HOUSE

Total = 5

40 . 4 FIRE FIGHTING WATER PUMPS


40. 4. 1 FIRE WATER PUMPS & ACCESSORIES Applicable Standards:

AURORA United States Yes LOCAL AGENT SAUDI PUMP >= 500 GPM
FAIRBANK MORSE United States Yes LOCAL AGENT SAUDI PUMP >=500GPM
FLOWAY United States Yes
ITT United States Yes
PEERLESS United States Yes LOCAL AGENT SAUDI PUMP >=500GPM
PETTERSON United States Yes
REDDY BUFFALOU United States Yes
WORTHINGTON United States Yes LOCAL AGENT SAUDI PUMP >=500GPM

Total = 8

40 . 5 FOAM SYSTEM
40. 5. 1 FOAM SYSTEM & ACCESSORIES Applicable Standards:

ANGUS United Kingdom Yes


CHEMGUARD United States Yes LOCAL AGENT NAFISCO
NATIONAL FOAM United States Yes LOCAL AGENT HEBA

Total = 3

40 . 6 FIRE EXTINGUISHER
40. 6. 1 PORTABLE / MOBILE Applicable Standards:

Page 168 of 169


METERIAL / EQUIPMENT Pre-Qualified
SER DESCRIPTION MANUFACTURER FACTORY LOCATION Manufacturers REMARKS
By SEC
HEBA Saudi Arabia Yes
SFFECO Saudi Arabia Yes

Total = 2

40. 6. 2 PORTABLE FIRE EXTINGUISHER, CO2 TYPE Applicable Standards:

ANSUL United States Yes LOCAL AGENT AL-BILAD >=5 LBS


KIDDE United States Yes >=5 LBS
SENTRY United States Yes LOCAL AGENT AL-BILAD >=5 LBS

Total = 3

40. 6. 3 PORTABLE FIRE EXTINGUISHER, DRY CHEMICAL TYPE Applicable Standards:

ANSUL United States Yes LOCAL AGENT AL-BILAD >=2 LBS


SENTRY United States Yes LOCAL AGENT AL-BILAD >=2 LBS

Total = 2

40. 6. 4 PORTABLE FIRE EXTINGUISHER, WATER TYPE Applicable Standards:

SENTRY United States Yes LOCAL AGENT AL-BILAD >=2.5 LBS

Total = 1

40 . 7 FIRE DETECTION AND ALARM SYSTEM


40. 7. 1 EQUIPMENT & ACCESSORIES Applicable Standards:

AUTOCALL (GRINNEL) United States Yes


EDWARDS CANADA Yes LOCAL AGENT AL-BILAD
MIRETONE United States Yes
NOTIFIRE United States Yes LOCAL AGENT -NAFISCO
Siemens Building Technologies Fire Safety United States-New Jersey Yes Originaly was PYROTRONICS from USA.
Local Agents are: Siemens Building Technologies (SBT) &
SASEEQ
SIMPLEX United States Yes LOCAL AGENT NAFISCO
THORN United Kingdom Yes

Total = 7

Page 169 of 169

You might also like