Professional Documents
Culture Documents
LOADING TECHNOLOGY
PALLETIZING TECHNOLOGY
PACKAGING TECHNOLOGY
SORTATION AND
DISTRIBUTION SYSTEMS
BEUMER
high capacity belt bucket elevators
BEUMER high capacity belt bucket elevators
Bucket elevators
2
BEUMER technology the reliable solution of your transport duties
Conveying capacities of more Conveying heights over 150 m Long service life
than 1,700 m3/h and center
distances over 150 m are The belts are reinforced with steel The special connection between
possible wires, which are arranged in a spe- the bucket and belt reduces the
cial way, so that center distances wear of the belt to a minimum, thus
If a belt is used as the traction car- in excess of 150 m are possible. avoiding the tearing out of the
rier and the bucket spacing is opti- Depending on the combination of bucket during operation thereby
mized, conveying speeds can be conveying rate and bucket filling ensuring a long service life and
achieved which permit transport level, belts are available with profitable operation of the machine.
volumes of more than 1,700 m3/h. appropriate strengths that can be
Bucket widths ranging between used, taking into account the Maximum reliability of operation
160 mm and 2,000 mm are availa- required safety factors.
ble to achieve the required trans- The proven machine components of
port volumes up to the maximum. the BEUMER bucket elevator tech-
nology are the basis of a high relia-
bility and a trouble-free operation.
3
The bucket elevator head
4
BEUMER high capacity belt bucket elevators
The bucket mounting The segments form a closed strip An intermediate rubber plate in
on the bucket back side, so that all the bucket mounting area provi-
Depending on the material size, forces acting on the belt are equal- des the wear protection of the
two different types of bucket ly distributed to the steel wires belt.
connections are used for BEUMER embedded in the belt, thus making
high capacity belt bucket elevators, it impossible for the buckets to be
i.e. the mounting with split seg- torn out of the belt.
ments (pictures 1a and 1b) and the
rubber-batten mounting (picture 2).
If the buckets are connected with
bucket screw mountings, they are
frequently torn out and for this rea-
son, this type of connection is not
used.
The material size is a criterion for
the selection of the mounting type.
The segment mounting is used
for sizes of up to 25 mm. For sizes
ranging between 25 and 60 mm,
the rubber-batten mounting deve-
loped by BEUMER is used (for tem- 1a 1b 2
peratures of up to 70 C).
5
BEUMER technology the reliable solution of your transport duties
BEUMER belt clamping belt clamping connection. As utilizes the following monitoring
connection for steel wire belts shown on the cross section, the devices:
belt is clamped by means of bolts belt off-track switch
In order to connect the bucket ele- between a steel wedge and two material level switch in the
vator belt ends permanently and aluminum clamping jaws. The bucket elevator boot
safely, we developed the BEUMER number of bolts depends on the motion detector /
belt width. slip control
The exposed and spliced cable safety switch for the belt
ends are also cast with a soldering clamping connection
metal. At the points of contact with thermal switch at the fluid
the clamping jaws, the belt ends coupling as overload protection
are reinforced with additional layers speed control at the coupling for
of belting material. the maintenance drive
For belt bucket elevators with large (inching drive)
center distances, a monitoring
switch is installed at the belt clam-
ping connection, which perma-
nently controls the seat of the
clamping screws.
Thanks to the safety switch develo-
ped by BEUMER, this control takes
place without any wear using
reliable contactless technology.
The standard design of our high
capacity belt bucket elevators
6
Technical Data
Bucket width mm 160 200 250 315 400 500 630 800 1.000 1.250 1.400 1.600 1.800 2.000
Normal design AA = center distance 2x700 2x800 2x900 2x1000
e Length of boot housing mm 1.040 1.080 1.280 1.350 1.500 1.650 1.850 2.100 2.500 2.500 2.500 2.500 2.500 2.500
f Width of boot housing mm 400 450 500 550 700 800 930 1.100 1.350 1.600 1.800 2.000 2.200 2.400
g Inlet height above AA <80m: mm 1.320 1.320 1.400 1.500 1.650 1.850 1.950 2.200 2.350 2.350 2.350 2.350 2.350 2.350
floor level AA >=80m: mm 1.620 1.620 1.700 1.800 1.950 2.150 2.250 2.500 2.650 2.650 2.650 2.650 2.650 2.650
h Height of drive pulley above shaft casing mm 900 900 1.000 1.120 1.250 1.400 1.600 1.800 2.000 2.000 2.000 2.000 2.000 2.000
i Distance between shaft casings mm 340 340 480 480 500 590 650 760 1.000 1.000 1.000 1.000 1.000 1.000
k Distance flange center bucket elevator center mm 770 790 915 950 1.100 1.220 1.350 1.550 1.750 1.750 1.750 1.750 1.750 1.750
m Height of tension AA <80m: mm 750 750 900 920 1.000 1.100 1.250 1.350 1.550 1.550 1.550 1.550 1.550 1.550
pulley shaft AA >=80m: mm 1.050 1.050 1.200 1.220 1.300 1.400 1.550 1.650 1.850 1.850 1.850 1.850 1.850 1.850
n Height of boot housing AA <80m: mm 1.400 1.400 1.500 1.600 1.800 2.000 2.120 2.360 2.500 2.500 2.500 2.500 2.500 2.500
AA >=80m: mm 1.700 1.700 1.800 1.900 2.100 2.300 2.420 2.660 2.800 2.800 2.800 2.800 2.800 2.800
o Space requirements above bucket elevator head mm 800 800 800 800 900 900 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000
p Space requirements beside bucket elevator head mm 365 420 465 530 625 675 790 920 1.055 1.200 1.330 1.430 1.530 1.630
r Overall width of bucket elevator boot mm 1.000 1.050 1.100 1.152 1.322 1.422 1.616 1.786 2.076 2.326 2.566 2.766 2.966 3.166
x Ceiling opening mm 1.300 1.300 1.500 1.600 1.750 1.900 2.150 2.400 2.800 2.800 2.800 2.800 2.800 2.800
y For the shaft casings mm 650 700 750 800 950 1.050 1.200 1.400 1.650 1.900 2.100 2.300 2.500 2.700
Bucket width mm 500 630 800 1.000 1.250 1.400 1.600 1.800 2.000
HC design AA = center distance 2x700 2x800 2x900 2x1000
e Length of boot housing mm 2.100 2.100 2.500 2.500 2.500 2.500 2.500 2.500 2.500
f Width of boot housing mm 800 930 1.150 1.350 1.600 1.800 2.000 2.200 2.400
g Inlet height above AA <80m: mm 2.200 2.200 2.350 2.350 2.350 2.350 2.350 2.350 2.350
floor level AA >=80m: mm 2.500 2.500 2.650 2.650 2.650 2.650 2.650 2.650 2.650
h Height of drive pulley above shaft casing mm 1.800 1.800 2.000 2.000 2.000 2.000 2.000 2.000 2.000
i Distance between shaft casings mm 760 760 1.000 1.000 1.000 1.000 1.000 1.000 1.000
k Distance flange center bucket elevator center mm 1.550 1.550 1.750 1.750 1.750 1.750 1.750 1.750 1.750
m Height of tension AA <80m: mm 1.350 1.350 1.550 1.550 1.550 1.550 1.550 1.550 1.550
pulley shaft AA >=80m: mm 1.650 1.650 1.850 1.850 1.850 1.850 1.850 1.850 1.850
n Height of boot housing AA <80m: mm 2.360 2.360 2.500 2.500 2.500 2.500 2.500 2.500 2.500
AA >=80m: mm 2.660 2.660 2.800 2.800 2.800 2.800 2.800 2.800 2.800
o Space requirements above bucket elevator head mm 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000
p Space requirements beside bucket elevator head mm 770 835 955 1.055 1.200 1.330 1.430 1.530 1.630
r Overall width of bucket elevator boot mm 1.466 1.620 1.875 2.076 2.326 2.566 2.766 2.966 3.166
x Ceiling opening mm 2.400 2.400 2.800 2.800 2.800 2.800 2.800 2.800 2.800
y For the shaft casings mm 1.050 1.200 1.450 1.650 1.900 2.100 2.300 2.500 2.700
7
The BEUMER high capacity belt high quality materials, make the If requested by the customer, the
bucket elevator technology is BEUMER high capacity belt bucket BEUMER service offers service
based on experiences with the elevator a highly reliable system for contracts for the bucket elevator,
supply and installation of more customers in all sectors of indu- in order to ensure a preventative
than 2,000 bucket elevators that stry. The continuous BEUMER re- maintenance program and trouble-
are in operation all over the world. search and development program free continuous operation.
The use of a solid and proven ensures their ability to meet and The reliable technology of the
technology in connection with handle any future demands arising BEUMER high capacity bucket
safety and monitoring devices and in the market. elevator will meet your demands.
?
?
The information contained in this brochure merely serves as a non-binding description of our products and is without guarantee.
Binding information, in particular relating to capacity data and suitability for specific applications, can only be provided within the framework of concrete inquiries. E103 0109