You are on page 1of 120

Index of

Technical Publications

January 2014 July 2014

Jan 2013
Table of Contents

Users Guide I

Distributor Information II

Price Information III

Revision Record IV

Foreword V

Subject Index

AGS Standards 1

AS Standards 19

ESC Standards 84

RS Standards 86

TS Standards 93

Numerical Index of Cancelled Standards 108


Users Guide
The Index of ADS Standards and Technical Specifications is your guide to locate a specific
published Standard or Specification. The documents are grouped by type and are in numerical
order e.g. AGS, AS, ESC, RS and TS. The term Standard shall be used throughout this
document to mean Standard, Specification or Reference Sheet as applicable.

The list provides the following information:

Reference: ADS Standard number


Title: Title of Standard
Edition: Edition (Issue) of the published document
Pages: Number of pages in the document
Status: Status of the Standard
I = Inactive or Obsolete
A = Active
Price: Price per copy of the Standard

All ADS Technical Publications are available individually or as a set from the five
distributors as shown on the next page under Distributor Information. The complete
price list is detailed on Page III of this guide.
Distributor Information

NORMADOC
12, Rue de Capri,
75012 Paris,
FRANCE
Tel: +33 140 020305
Fax: +33 140 020312
Email: commande@normadoc.fr
www.normadoc.com
Price Information
Price for the complete ADS Collection on CD-ROM
Purchase of an ADS technical publications CD - ROM includes a perpetual (ongoing)
licence for that company. The pricing policy for the CD ROMS of ADS Standards is as
follows:
1 x CD of ADS Technical publications to a non networked workstation: 3,925 (2,625).
For additional non networked workstation: 390 (260).
Thus for one company wishing to use the CD on 2 workstations the price will be 3,925 /
2,625 + (1 x 390 / 260) = 4,315 (2,885).
For a company wishing to use the CD on 10 workstations the price will be 3,925 / 2,625
+ (9 x 390 / 260) = 7,435 (4,965).
A CD contains all Active and Inactive Standards (AS, AGS, RS and ESC) together with
the complete current range of Technical Specifications (TS). It also contains an updated
version of this ADS Standards and Technical Specifications Index (updated every 6
months), which includes a list of all Cancelled Drawings and a Record of all Technical
Specifications. It will also hold a file of the Cancelled Drawings during the previous six
month period and the ADS Foreword.
Networking of the ADS Standards CD between 3 to10 computers will be 7,500 (5,250)
including the cost of updates for the first year. Thereafter 2,250 (1,600) per annum. For
a network containing more than 10 computers please consult ADS for pricing.
The CD will be revised at 6 monthly intervals at a cost of 390 (260) per revision.
All ADS Technical Publications are published under copyright and cannot be reproduced.

Price for Individual Standards and Specifications


Individual Standards are available at the following costs:
Sheets Sheets

1 18 13 13 70 47
2 30 20 14 70 47
3 45 30 15 75 50
4 55 37 16 75 50
5 60 40 17 80 53
6 60 40 18 85 57
7 60 40 19 90 60
8 65 43 20 95 63
9 65 43 25 110 73
10 65 43 30 120 80
11 70 47 40 140 93
12 70 47 50 170 113

For payment details and further information please contact the relevant distributor, see page II
Revision Record
Revision Date Changes
October 2009 Replacement of SBAC & Logo with A|D|S & new Logo.
SBAC / DMA merger information shown in Foreword.
Status / price update of AGS2035, AGS2088, AGS2090, AGS2092, AGS2094,
AGS3441, AGS3442, AS4526, AS5419, RS681, TS66, TS154, TS155 &TS260.
Inclusion of missing standards AS6228 to AS6287, AS25370 & AS43041.
Number correction AS4110-109.
Inclusion of TS docs in list of Cancelled Standards.
Removal of Master Record of Technical Specifications no longer required.
General typographical changes.
January 2010 Section title page colour change.
July 2010 Replacement of A|D|S Logo with corrected version.
Status / Price update of AS46771, AS46772, TS201, TS202.
Inclusion of Amendment Record (AR) AS46771-AR, AS46772-AR.
January 2011 Page 82 AR52790 799 amended, was AS52790-799 now AR52790-99
AS43021 Issue 2 was AS43021 Issue 1
AS43021 Title change now Nut, Union-Female, Metric Pipe Series was Nut,
Union
AS43021-AR Issue 2 added at Page 74
TS201 and TS202 amended to read No charge on ADS website.
Numerical Index of Cancelled Standards, AS27850-899 now A was C
Page II Thomson Reuters Techstreet plus contact details added.
Page 78, AS44750-753 Issue 7 was AS44750-753 Issue 6
AS44750-AR added at Issue 7.
Page 87, AS63420-429 amended, was AS63420-429 now AS63420-423.
AS63420-423 Issue 5 was AS63420-429 Issue 4
AS63420-AR Issue 5 added
AS63476-479 Issue 4 was AS63476-479 Issue 3
AS63476-AR added at Issue 4
Page 88, Full details added for the following References: AS65110, AS65111,
AS65112 and AS65113.
Page 88, AS65000 Issue 2 was AS65000 Issue 1
AS65000-AR added at Issue 2
Page 104, TS200 Issue 35 was TS200 Issue 33
TS200-AR Issue 3 was TS200-AR Issue 1
TS201 Issue 5 was TS201 Issue 4
TS201-AR Issue 5 was TS201-AR Issue 4
TS202 Issue12 was TS202 Issue 11
TS202-AR Issue 5 was TS202-AR Issue 4
Jan 2012 Replacement of A|D|S to ADS and logo due to Brand change, whole document.
Page 48 AS5419 Issue 8 was AS5419 Issue 7
Page 60 AS12800 Issue 6 was AS12800 Issue 5
AS12801 Issue 6 was AS12801 Issue 5
Page 84 AS65000 Issue 3 was AS65000 Issue 2
AS65000-AR Issue 3 was AS65000-AR Issue 2
AS65010 Issue 2 was AS65010 Issue 1
AS65010-AR Issue 2 added
Page 86 ESC76 Issue 5 was ESC76 Issue 4
ESC76-AR Issue 5 added
Page 95 TS24 Issue 6 was TS24 Issue 5 change due to typo error.
Page 98 TS200 Issue 36 was TS200 Issue 35
Page 99 TS200-AR Issue 4, 5 Pages was TS200-AR Issue 3, 4 Pages
July 12 Page 47 AS5419-AR Issue 8 added no previous issues.
Page 60 AS12800-AR Issue 6 added no previous issues.
AS12801-AR Issue 6 added no previous issues.
Page 66 AS26080-84 Issue 5 was AS26080-84 Issue 4
AS26080-AR Issue 5 added no previous issue.
AS26080-84 Issue 6 was AS26080-84 Issue 5
AS26080-AR Issue 6 was AS26080-AR issue 5
Page 70 AS41100-109 Issue 6 was AS41100-109 Issue 5
AS41100-AR Issue 1 added no previous issues.
Page 73 AS44445 Issue 10 was AS44445 Issue 9
AS44445-AR Issue 10 added no previous issues.
AS44691-694 Issue 3 was AS44691-694 Issue 2
AS44691-AR Issue 3 added no previous issue.
Page 98 TS200 Issue 37 was TS200 issue 36
Page 99 TS200-AR Issue 5 was TS200-AR Issue 4
Jan 13 Page III Price Information. Changes to the price of CD-ROMs.
Now 3,925 (2,625) was 3,750 (2,500). Now 390 (260) was 375 (250).
Now 4,315 (2,885) was 4,125 (2,750). Now 7,435 (4,965) was 6,135
(4,750). Also corrects error 6,135 should have read 7,125.
Networking now 7,500 (5,250) and 2,250 (1,600) was 7,250 (5,000) and
2,175 (1,500).
Page 60 AS12810-839 Issue 4 was Issue 3
AS12810-AR added no previous issue.
AS12840-869 Issue 4 was Issue 3
AS12840-AR added no previous issue.
Page 70 AS41100 Issue 7 was Issue 6
AS41100-AR Issue 7 was Issue 6
AS43003 Issue 4 was AS43003 Issue 3
AS43003-AR Issue 4 added no previous issues.
AS43013 Issue 5 was AS43013 Issue 4
AS43013 Issue 5 added no previous issues.
Page 95 TS70 Issue 5 was Issue 4
TS70-AR added no previous issue
TS82 Issue 5 was Issue 4
TS82-AR added no previous issue
Page 97 TS200 edition 38 was edition 37
Page 98 TS200-AR edition 6 was edition 5.
July 13 Page 55 AS6706 Issue 3 was issue 2
AS6706-AR Issue 3 added no previous issue
AS6707 Issue 3 was issue 2
AS6707-AR added no previous issue
Page 60 AS12980-984 Issue 5 was Issue 4
AS12980-AR Issue 5 added no previous issue.
Page 66 AS26070 Issue 4 was issue 3
AS26070-AR Issue 4 added no previous issue
Page 69 AS32000 Issue 3 was issue 2
AS32000-AR Issue 3 added no previous issue
Page 81 AS62403-440 was A62403-432
Page 82 AS63280 Issue 4 was issue 3
AS63280-AR Issue 4 added, no previous issue
Page 91 RS610 Issue 8 was Issue 7
RS610-AR Issue 8 added no previous issue
Page 97 TS200 Issue 39 was issue 38
Page 98 TS200-AR Issue 7 was issue 6
Jan 14 Page 60
AS12800 Now Issue 7 was Issue 6
AS12800-AR now Issue 7 was Issue 6
AS12801 now Issue 7 was Issue 6
AS12801-AR now Issue 7 was Issue 6
AS12980-AR Pages 2 was1 page, Price now 30 was 18
AS12810-839 now Pages 3 was 1 page, Price now 45 was 18
AS12840-869 now Pages 3 was 1 page, Price now 45 was 18
AS12840-AR now Pages 3 was 1 page, Price now 45 was 18
Jan 14 Contd Page 69
AS32000-004 now 2 pages was 1 page, Price now 30 was 18
AS32000-AR now Pages 2 was 1 page, Price now 30 was 18
Page 70
AS41900 now Issue 3 was Issue 2
AS41902 now Issue 4 was Issue 3
AS43003-AR now Pages 1 was pages 2, Price now 18 was 30
AS43013-AR now Pages 1 was pages 2, Price now 18 was 30
Page 73
AS44691-694 now Pages 3 was pages 2, Price now 45 was 30
AS44691-AR now Pages 2 was 1 page. Price now 30 was 18
Page 82
AS63280-289 now Issue 4 was Issue 3, Pages now 2 was pages1, Price now
30 was 18.
AS63280-AR now Pages 2 was pages 1, Price now 30 was 18
Page 83
New added AS65300 Issue 1, Pages 8, A, Price 65
Page 85
ESC76-AR now Pages 1 was pages 2, Price now 18 was 30
Page 91
RS678 Issue 6 was Issue 5, Pages now 6 was pages 4, Price now 60 was 55
New added RS678-AR Issue 6, Pages 1, Price 18
Page 95
TS70 now Pages 13 was pages 14, Status now I was A
TS70-AR now Pages1 was 2, Price now 18 was 30
TS82 now Pages 13 was pages 14, Status now I was A
TS82-AR now Pages 1 was pages 2, Price now 18 was 30
ADS AEROSPACE INDUSTRY STANDARDS
FOREWORD
ADS was formed by the merger of the Society of British Aerospace Companies (SBAC), the Defence
Manufacturers Association (DMA) and the Association of Police and Public Security Suppliers
st
(APPSS) on 1 October 2009 to promote Advancing the UK Aerospace, Defence and Security
Industries.
The legal obligations and copyright authority of all standards issued by SBAC are therefore
assigned / transferred to ADS Group Limited.
ADS is a non-profit making body made up of members from the Aerospace, Defence
Manufacturers and Security Industries. These Standards are produced by ADS with the
assistance of, and for the benefit of the Aerospace Industry as part of a continuous programme of
Standardisation for Aerospace application under the control of the Technical Standards
Committee of ADS.
ADS Standards are published as part of the series of ADS Aerospace Industry Standards, and
where appropriate, additional manufacturing and inspection requirements are issued as Reference
Sheets (RS) or Technical Specifications (TS). It is the responsibility of those using or specifying a
Standard to ensure that the product, process or manufacturer so used or specified is appropriate
for the task or role in question. ADS wishes to draw special attention to the fact that Technical
Specifications (TS) include testing and procedures by which a user or Design Authority can
establish whether a particular manufacturer, prima facie, has the capability to produce hardware
in accordance with the appropriate drawings and related specifications.
ADS, its servants or representatives accept no responsibility for the continued quality of hardware
items produced against the relevant drawings and specifications, this responsibility remains with
the user.
Whilst ADS takes all reasonable care in the preparation of all Standards, neither ADS, its officers,
employees, servants, agents or representatives shall have any responsibility or liability
whatsoever with respect to any act or omission (whether negligent or not) of whatsoever nature
of, or in connection with, the preparation of the Standards or any part thereof. These
responsibilities are those of the user or Design Authority. Users of ADS Standards agree that any
such liability on the part of ADS is excluded to the maximum extent permitted by law. ADS
Standards may be changed from time to time, and both users and manufacturers of these parts
should ensure that they are in possession of the latest issue of the Standards and supporting
documentation before adoption or the commencement of production.
It is recommended that TS260, Metallic Materials List of Alternative Material Standards be
consulted prior to manufacture of ADS products.
Each Standard sheet in the series is a photographic or electronic reproduction of a master
drawing and references to scales are not necessarily correct. A Master Index to all of these
Standards is published separately.
All references to Standards include reference to RS and TS publications.
Details of this and any further information can be obtained from ADS.
ADS Group Limited Registered in England and Wales no. 7016635
2014 ADS Group Limited. The information in this document is copyright and the property of ADS
Group Ltd. It shall not be copied, or communicated to a third party, or used, for any purpose other
than that for which it is supplied without the express written consent of ADS Group Limited.
AGS Specifications

1
Reference Title Edition Pages Status Price

AGS1 Procedure for the establishment of standards for proprietary items 1 2 A 30.00.
AGS100 AGS Design Notes (The requirements of this AGS are now 7 1 A 18.00
embodied on A|D|S Reference Sheet RS 700 and drawing
reference to AGS100 should be taken as reference to RS700).
AGS113 B.A. Wing Nuts (Brass) 15 1 A 18.00
AGS120 B.S.F. Wing Nuts (Brass) 16 1 A 18.00
AGS154 Wire Locking Rings 6 1 A 18.00
AGS157 Washers: Special (Aluminium Alloy) 13 1 A 18.00
AGS159 Repair Bolts for De-Bergue Riveted Tanks 8 2 A 30.00
AGS160 Bright Washers (Steel) 19 1 A 18.00
AGS161 Special Bright (Steel) Washers 13 1 A 18.00
AGS162 Single Spring Washers 11 1 A 18.00
AGS163 Double Spring Washers 11 1 A 18.00
AGS164 Round Jointing Washers (Hard Fibre) 14 1 A 18.00
AGS165 Wire Locking Rings 5 1 A 18.00
AGS166 Standards Split Pins 8 1 A 18.00
AGS194 Straight Tab Lockwashers (Steel) 12 1 A 18.00
AGS195 Angle Tab Lockwashers (Steel) 15 1 A 18.00
AGS207 Union Lock Nuts (Steel) 12 1 A 18.00
AGS209 Standard Conical Nipples (for superceded items see AGS1101) 19 1 A 18.00
AGS216 Plugs, Flanged (Brass) 18 1 A 18.00
AGS224 Union Lock Nuts (Brass) 12 1 A 18.00
AGS232 Assembly of Eyelets 12 4 A 55.00
AGS250 Standard Countersunk Woodscrews 10 1 A 18.00
AGS251 Standard Countersunk-Head Woodscrews 11 1 A 18.00
AGS252 Standard Round-Head Woodscrews 10 1 A 18.00
AGS253 Standard Round-Head Woodscrews 10 1 A 18.00
AGS385 Ball Joint Assembly 20 4 A 55.00
AGS501 Rivets (Tubular) 12 3 A 45.00
AGS511 Ballast Weights (Grey Cast Iron) 2 1 A 18.00
AGS513 Rivets (Tubular Split) Flat Head, Light Alloy 3 1 A 18.00
AGS514 Rivets (Tubular Split) Flat Head, Mild Alloy 4 1 A 18.00
AGS515 Rivets (Tubular Split) Cone Head, Light Alloy 3 1 A 18.00
AGS516 Rivets (Tubular Split) Cone Head, Mild Alloy 4 1 A 18.00
AGS519 Protective Rubber Caps for Heat Exchange Equipment 4 1 A 18.00
AGS560 Disconnector for operating Head Type F. for emergency Dinghies 2 4 I 55.00
AGS565 Plugs (Brass) 12 2 I 30.00
AGS566 Plugs, (Aluminium Alloy) 16 2 I 30.00
AGS567 Jointing Washers Thin, (Hard Fibre) 9 1 A 18.00
AGS568 Jointing Washers (Aluminium) 5 1 A 18.00
AGS571 Bolts, Shear 6 1 I 18.00

2
Reference Title Edition Pages Status Price

AGS572 Nuts - Thin Slotted and Plain 4 2 I 30.00


AGS575 Screwed Rod (S.I.) 3 1 I 18.00
AGS576 Screwed Rod (Light Alloy) 4 1 I 18.00
AGS581 Olives for Copper Pipe Connections 3 1 I 18.00
AGS582 Frames Inspection (Woods Type) 6.625 x 6.625 6 1 A 18.00
AGS583 Frames Inspection (Woods Type) 4 x 4 5 1 A 18.00
AGS584 Clip for Detachable Pipe Line 9 1 A 18.00
AGS585 Single Spring Washers (Thin Type) 5 1 I 18.00
AGS586 Double Spring Washers (Thin Type) 3 1 I 18.00
3
AGS589 /8 B.S.F. Rod End Bearing, Internal Thread, (Short) Assembly 12 3 A 45.00
AGS590 Rod End Bearing - Plain Shank Assembly 9 2 A 30.00
5
AGS591 /16 B.S.F. Rod End Bearing, External Thread Assembly 9 2 A 30.00
3
AGS592 /8 B.S.F Rod End Bearing, Internal Thread (Long) Assembly 10 2 A 30.00
5
AGS593 /16 B.S.F. Rod End Bearing, Internal Thread, (Short) Assembly 10 2 A 30.00
AGS595 Plug, Dust Protection, Metal, B.S.P.F. 9 1 A 18.00
AGS596 Cap Protection - Deep Drawn, Metal B.S.P.F. 5 1 A 18.00
AGS597 Cap Protection - Shallow Drawn, Metal B.S.P.F. 5 1 A 18.00
AGS600 Standard Petrol Filter (N 1 size) 11 1 I 18.00
AGS601 Standard Petrol Filter (N 2 size) 11 1 I 18.00
AGS602 Standard Petrol Filter (N 3 size) 9 1 I 18.00
AGS604 Petrol Filter Details 17 12 I 70.00
AGS605 Clip - Hose (Type J) Assembly 12 6 I 60.00
AGS606 Assembly of Hose Clip 19 5 I 60.00
AGS607 Filler Cap 16 1 I 18.00
AGS608 Filler Seating (Flange Type) 9 1 I 18.00
AGS609 Alternative Filler Seating (Ring Type for Necks) 9 1 I 18.00
AGS610 Details & Assembly of Petrol & Water Strainers 6 3 I 45.00
AGS626 Reducing Union Body (Brass) 20 1 I 18.00
AGS627 Double Ended Union Body (Brass) 23 1 I 18.00
AGS628 Reducing Plug 10 1 I 18.00
AGS629 Female Flanges (Brass) 17 2 I 30.00
AGS630 Special Female Flanges (Brass) 15 2 I 30.00
AGS639 Olive Joint Adapters 8 1 I 18.00
AGS666 Pulleys for Main and Engine Controls 8 2 I 30.00
AGS676 G.A. of Bore Drain Cock (No. 1 size) Assembly 17 7 I 60.00
AGS677 G.A. of Bore Drain Cock (No. 2 size) Assembly 16 7 I 60.00
AGS711 Metal Couplings Outer Sleeve (Brass) 17 2 I 30.00
AGS712 Metal Couplings Inner Sleeve (Brass) 14 4 I 55.00
AGS762 B.A. Nuts (Light Alloy) 9 1 I 18.00
AGS765 B.A. Bolts (Light Alloy) 8 1 I 18.00
AGS771 B.S.F. Eye Bolt 5 1 I 18.00
AGS784 Split Pins - Non-corrodible 12 1 I 18.00

3
Reference Title Edition Pages Status Price

AGS796 4 B.A. Eyebolt 5 1 I 18.00


AGS797 2" B.A. Eyebolt 5 1 I 18.00
AGS798 " B.A. Eyebolt 5 1 I 18.00
5
AGS799 /16 B.A. Eyebolt 5 1 I 18.00
7
AGS800 /16" B.S.F. Eyebolt 5 1 I 18.00
AGS801 " B.S.F. Eyebolt 5 1 I 18.00
AGS803 " B.S.F. Eyebolt 5 1 I 18.00
5
AGS838 Assembly of Mark1 Low Pressure Unions for /16 DIA. Tubing 23 23 A 95.00
AGS839 Thermometer Washer (Copper) 3 1 A 18.00
AGS840 Drainage Hole Eyelets 4 1 A 18.00
AGS858 Countersunk Woodscrews for Securing Sheaths to Wooden 4 1 I 18.00
Airscrews
AGS859 Taper Pins (Stainless Steel) 2 1 I 18.00
AGS883 4" B.A. Studs 5 1 I 18.00
AGS884 2" B.A. Studs 5 1 I 18.00
AGS885 " B.F.S. Studs 5 1 I 18.00
5
AGS886 /16 B.F.S. Studs 5 1 I 18.00
AGS887 " B.F.S. Studs 5 1 I 18.00
AGS888 Drain Cock 5 1 I 18.00
AGS889 Drainage Hole Eyelets (Marine type) 4 1 A 18.00
AGS893 Standard Countersunk-Head Woodscrews 3 1 I 18.00
AGS894 Standard Round-Head Woodscrews 3 1 I 18.00
AGS895 Clip for Spearing Tubes 4 1 I 18.00
AGS897 Ferrules, Steel Wire for Elastic Cord 4 1 I 18.00
AGS899 Collars (Mild Steel) 5 1 I 18.00
5
AGS900 Assembly of Metal Couplings (Aluminium Alloy) /16 Light Type for 20 6 A 60.00
Automatic Controls only
AGS904 Pipe Couplings, (Aluminium Alloy), Outer Sleeve 27 4 A 55.00
AGS905 Pipe Couplings, (Aluminium Alloy), Inner Sleeve 25 4 A 55.00
AGS908 Reducing Union Body (Light Alloy) 9 1 I 18.00
AGS910 Lubrication Nipple 7 1 I 18.00
AGS920 Ferrules (non-corrodible) for Screwed Rod 3 1 I 18.00
AGS921 Screwed Rod (non-corrodible) 3 1 I 18.00
AGS934 Ferrules (Plated) for Screwed Rod 4 1 I 18.00
AGS935 Screwed Rod (Plated) 5 1 I 18.00
AGS937 R.A.E. Petrol Filters, Shallow Sump Type 12 2 I 30.00
AGS939 R.A.E. Petrol Filters 15 18 I 85.00
AGS946 Bright Washers (Steel, Non-corrodible) 4 1 I 18.00
AGS947 Special Bright Washers (Steel, Non-corrodible) 4 1 I 18.00
AGS948 Plugs Flanged (Aluminium Alloy) 16 2 A 30.00
AGS949 Double Ended Union Body (Steel) 17 2 A 30.00
AGS950 Metal Couplings reducing Union Body (Steel) 16 2 A 30.00
AGS952 Pipe Couplings Collar 18 1 A 18.00

4
Reference Title Edition Pages Status Price

AGS954 Metal Couplings (Steel), Outer Sleeve 17 2 A 30.00


AGS955 Metal Couplings (Steel), Inner Sleeve 19 3 A 45.00
AGS957 Union Lock Nuts (Light Alloy) 6 1 I 18.00
AGS958 Female Flanges (Light Alloy) 11 2 I 30.00
AGS959 Special Female Flanges (Light Alloy) 11 2 I 30.00
AGS963 Oil Thermometer Pocket, B.S. Pipe 9 3 I 45.00
AGS964 Oil Thermometer Pocket, 1 B.S. Pipe 9 3 I 45.00
AGS965 Oil Thermometer Pocket, 1 B.S. Pipe 8 6 I 60.00
AGS966 Cock (No. 2 Size) with Diffuser 7 1 I 18.00
AGS970 Washers (Aluminium Alloy) 7 1 I 18.00
AGS974 Oil Thermometer Pocket " B.S. Pipe 8 3 I 45.00
AGS977 Male Flanges (Bolted) (Aluminium Alloy) 10 2 A 30.00
AGS978 Male Flanges (Bolted) (Steel) 9 2 A 30.00
AGS980 Female Flanges (Bolted) (Aluminium Alloy) 6 2 A 30.00
AGS981 Female Flanges (Bolted) (Steel) 5 2 A 30.00
AGS986 Female Flanges (Bolted) with Spigot (Aluminium Alloy) 6 2 A 30.00
AGS987 Female, Flanges (Bolted) with Spigot (Steel) 6 2 A 30.00
AGS995 Studs 2 B.A. High Duty 2 1 A 18.00
AGS996 Studs " B.S.F. High Duty 3 1 I 18.00
3
AGS997 Studs /16 " B.S.F. High Duty 2 1 I 18.00
AGS998 Studs " B.S.F. High Duty 2 1 I 18.00
AGS1000 Clip - Hose, Type S. General Arrangement 4 9 I 65.00
AGS1001 R.A.E. Petrol Filter (200 G.P.H. Shallow Sump Type) 9 1 I 18.00
AGS1002 R.A.E. Petrol Filter 11 18 I 85.00
AGS1010 Standard Compressed Air Bottle Assemblies 3 2 I 30.00
AGS1011 Standard Compressed Air Bottle Details 4 5 I 60.00
AGS1100 Pipe Couplings, Typical Joints 4 13 A 70.00
AGS1101 Pipe Couplings, Arrangement of Pipe Joints 13 4 A 55.00
3
AGS1102 Pipe Couplings (Aluminium Alloy), Cone Union Body /16 to 15 2 A 30.00
3
AGS1103 Pipe Couplings (Aluminium Alloy), Union Body /16 to 2 15 2 A 30.00
3
AGS1104 Pipe Couplings (Aluminium Alloy), Cone Adaptor /16 to 17 2 A 30.00
AGS1105 Pipe Couplings (Aluminium Alloy), Union Adaptor 3/16 to 16 2 A 30.00
AGS1106 Pipe Couplings (Aluminium Alloy), Union Body (Cone to Nipple 15 2 A 30.00
type)
AGS1107 Pipe Couplings (Aluminium Alloy), reducing Cone Union 15 2 A 30.00
AGS1108 Pipe Couplings (Aluminium Alloy), Reducing Union (Cone to 16 2 A 30.00
Nipple type)
AGS1109 Pipe Couplings (Aluminium Alloy), Reducing Union 17 2 A 30.00
AGS1110 Pipe Couplings arrangement of Flanged Bulkhead Union Bodies 4 1 A 18.00
AGS1111 Pipe Couplings (Aluminium Alloy), Flanged Bulkhead Cone Union 13 2 A 30.00
Body 3/16 to

AGS1112 Pipe Couplings (Aluminium Alloy), Flanged Bulkhead Union Body 13 2 A 30.00
3
/16 to

5
Reference Title Edition Pages Status Price

AGS1113 Pipe Couplings (Aluminium Alloy), Flanged Bulkhead Union Body 13 2 A 30.00
(Cone to Nipple type)
AGS1114 Pipe Couplings (Alumm Alloy), Flanged Bulkhead Screwed Sleeve 12 2 A 30.00
AGS1115 Pipe Couplings, Washer Plates for Flanged Bulkhead Fittings 3 1 A 18.00
3
AGS1116 Pipe Couplings (Aluminium Alloy), Cone Elbow /16 to 13 2 A 30.00
AGS1117 Pipe Couplings (Aluminium Alloy), Union Elbow to 1 12 2 A 30.00
3
AGS1118 Pipe Couplings (Aluminium Alloy), Cone Tee /16 to 13 2 A 30.00
AGS1119 Pipe Couplings (Aluminium Alloy), Union Tee to 1 12 2 A 30.00
AGS1120 Pipe Couplings (Aluminium Alloy), Cone Tee (Unequal) 13 3 A 45.00
AGS1121 Pipe Couplings (Aluminium Alloy), Union Tee (Unequal) 11 3 A 45.00
AGS1122 Pipe Couplings (Aluminium Alloy), Cone & Nipple Tees (Unequal) 13 2 A 30.00
AGS1123 Pipe Couplings (Aluminium Alloy), Cone 4 Way Piece 3/16 to 13 2 A 30.00
AGS1124 Pipe Couplings (Aluminium Alloy), Cone 4 Way Piece to 1 12 2 A 30.00
AGS1125 Pipe Couplings (Aluminium Alloy), Cone 4 Way Piece (Unequal) 10 2 A 30.00
AGS1126 Pipe, Couplings (Aluminium Alloy), Union 4 Way Piece (Unequal) 10 2 A 30.00
AGS1128 Pipe Couplings. Arrangement of Cone Banjos Assembly 7 6 A 60.00
AGS1129 Pipe Couplings (Alumm Alloy) Single End Cone Banjo Body 3/16 to 18 2 A 30.00

AGS1130 Pipe Couplings (Alumm Alloy) Double End Cone Banjo Body 3/16 18 2 A 30.00
to
AGS1131 Pipe Couplings (Alumm Alloy) Double R.A. Cone Banjo Body 3/16 18 2 A 30.00
to
AGS1132 Pipe Couplings (Alumm Alloy) Single End Union Banjo Body 3/16 17 2 A 30.00
to 1
AGS1133 Pipe Couplings (Alumm Alloy) Double End Union Banjo Body 3/16 17 2 A 30.00
to 1
AGS1134 Pipe Couplings (Alumm Alloy) Double R.A. Union Banjo Body 3/16 17 2 A 30.00
to 1
AGS1135 Pipe Couplings (for Alumm Alloy Range) Banjo Bolt (3/16 to 1) 8 2 A 30.00
m
AGS1136 Pipe Couplings (for Alum Alloy Range) Banjo Bolt with Cone 11 2 A 30.00
Head Connection
AGS1137 Pipe Couplings (for Alumm Alloy Range) Banjo Bolt with Union 10 2 A 30.00
Head Connection
AGS1138 Pipe Couplings Jointing Washers (Aluminium) 8 1 A 18.00
AGS1139 Pipe Couplings Jointing Washers (Copper) 10 1 A 18.00
3
AGS1140 Pipe Couplings Nipple Plugs ( /16 to ) 12 2 A 30.00
AGS1142 Pipe Couplings Adaptor Nipple 11 2 A 30.00
AGS1143 Pipe Couplings Cone Plugs (3/16 to 1) 16 2 A 30.00
AGS1144 Arrangement of Hexagon Bulkhead Unions 3 1 A 18.00
AGS1145 Pipe Couplings (Aluminium Alloy), Hexagon Bulkhead Cone 17 2 A 30.00
Union Body (3/16 to )
AGS1146 Pipe Couplings (Aluminium Alloy), Hexagon Bulkhead Cone 15 2 A 30.00
Union Body (3/16 to 1)
AGS1147 Pipe Couplings (Aluminium Alloy), Hexagon Bulkhead Union Body 17 2 A 30.00
(3/16 to )
AGS1148 Pipe Couplings (Aluminium Alloy), Thin Nuts (3/16 to 1) 10 1 A 18.00
AGS1149 Pipe Couplings, Washer Plates for Hexagon Bulkhead Fittings 4 1 A 18.00

6
Reference Title Edition Pages Status Price

AGS1153 End Connection for Self Sealing Fuel Hose End Cap 3 1 I 18.00
AGS1160 End Connection (Straight) for Flexatex Fuel Hose. General 2 1 I 18.00
Arrangement
AGS1162 End Connection for Flexatex Fuel Hose, Type C7 2 1 I 18.00
AGS1163 Pipe Couplings Cone End Union Piece (Corrugated) 5 2 I 30.00
AGS1164 T Adaptor (for Fuel Tank Fire Extinguisher) 6 1 I 18.00
AGS1165 End Connection Fuel Hose - 90 Nipple Elbow Assembly 8 1 I 18.00
AGS1166 End Connection Fuel Hose - 45 Nipple Elbow Assembly 9 1 I 18.00
AGS1167 Pipe Couplings 90 Union Elbow Assembly 6 1 I 18.00
AGS1168 Pipe Couplings 45 Union Elbow Assembly 6 1 I 18.00
AGS1169 Pipe Couplings - Union Elbows, Union Sleeve 5 1 I 18.00
AGS1170 Pipe Couplings Nipple 10 2 A 30.00
AGS1171 Y Adaptor (for Fuel Tank Fire Extinguisher) 6 1 I 18.00
AGS1172 End Connection for Flexatex Fuel Hose, Flared End Connecting 5 1 I 18.00
Tube
AGS1173 Pipe Couplings (for Aluminium Alloy range) Banjo Bolt 3/16 to 1 8 2 A 30.00
B.S.P.F. with hole for Bleeder Screw
AGS1174 Pipe Couplings, Bleeder Screw, " B.S.F. 11 1 A 18.00
AGS1175 End Connection for Flexatex Fuel Hose 90 Elbow Tube 5 1 I 18.00
AGS1176 End Connection for Flexatex Fuel Hose 45 Elbow Tube 5 1 I 18.00
AGS1177 Pipe Couplings 90 Elbow Tube 4 1 I 18.00
AGS1178 Pipe Couplings 45 Elbow Tube 3 1 I 18.00
AGS1182 Flared End Connection (Straight) for Flexatex Fuel Hose. General 3 1 I 18.00
Arrangement
AGS1183 End Connection (90 Elbow) for Flexatex Fuel Hose General 3 1 I 18.00
Arrangement
AGS1184 End Connection (45 Elbow) for Flexatex Fuel Hose General 3 1 I 18.00
Arrangement
AGS1185 Pipe Couplings Cone Plugs (Brass) 4 1 I 18.00
AGS1186 Seals, Bonded, Steel and Synthetic Rubber 13 4 A 55.00
AGS1187 Standard Union Nuts (Light Alloy) 11 1 I 18.00
AGS1193 Pipe Coupling " Flanged Bulkhead Union Body 5 1 I 18.00
AGS1194 Pipe Coupling " x " Flanged Bulkhead Union Body 5 1 I 18.00
AGS1195 Pipe Couplings Cone to Union Tees Unequal 4 2 I 30.00
AGS1196 Pipe Couplings Union 4-Way Piece (Unequal) 4 1 I 18.00
AGS1197 Pipe Couplings Nipple Plugs (Brass) 3 1 I 18.00
AGS1198 Pipe Couplings Cone Tee (Equal) 5 1 I 18.00
AGS1199 Pipe Couplings Union Tee (Unequal) 4 1 I 18.00
AGS1200 Charging Valve Mark I, (Air & Hydraulic) Valve Body Assembly 7 10 I 65.00
AGS1211 Adaptor Block (" B.S.P.) for Air Charging Valve 7 1 I 18.00
AGS1212 Adaptor Block (" B.S.P.) for Air Charging Valve 7 1 I 18.00
AGS1213 Pipe Couplings (Aluminium Alloy Range) Banjo Bolt Assembly 13 2 A 30.00
AGS1214 Pipe Couplings (Aluminium Alloy Range) Aluminium Alloy Banjo 15 2 A 30.00
Bolt with Cone Head Connector
AGS1215 Pipe Couplings (Light Alloy Range) Light Alloy Banjo Bolt with 7 1 I 18.00

7
Reference Title Edition Pages Status Price

Union Head Connection


AGS1216 Standard Union Nuts (Steel) 10 2 A 30.00
AGS1217 Standard Union Nuts (Brass) 10 1 I 18.00
AGS1218 Pipe Couplings (Aluminium Alloy) Standard Inner Sleeve 14 2 A 30.00
AGS1219 Dimensions of Tapped Holes in Components for connecting AGS 4 2 A 30.00
Pipe Couplings Direct
AGS1220 Pipe Couplings for Aluminium Allow Range, Aluminium Alloy Banj 12 2 A 30.00
Bolt 3/16 to 1 B.S.P.F. with Hole for Bleeder Screw o
AGS1229 Plugs, Transportation, B.S.P.F. 2 1 A 18.00
AGS1230 G.A. Re-usable End Fitting for Non-Fire Resistant Hose D.T.D. 2 1 A 18.00
(R.D.I.) 3951
AGS1231 Union Nut. Re-usable End Fittings for Non-Fire Resistant Hose 7 2 A 30.00
D.T.D. (R.D.I.) 3951
AGS1232 Tailpiece Re-usable End Fittings for Non-Fire Resistant Hose 7 2 A 30.00
D.T.D. (R.D.I.) 3951
AGS1233 Ferrule Re-usable End Fittings for Non-Fire Resistant Hose 7 2 A 30.00
D.T.D. (R.D.I.) 3951
AGS1234 Assembly of re-usable 90 End Fittings for Non-Fire Resistant 7 6 A 60.00
Hose D.T.D. (R.D.I.) 3951
AGS1235 Assembly of Re-usable 45 End Fittings for Non-Fire Resistant 6 3 A 45.00
Hose D.T.D. (R.D.I.) 3951
AGS1236 Pipe Couplings, Cone Caps (Steel) 3/16 to 1 6 2 A 30.00
I
AGS1237 Assembly of Re-usable 90 End Fitting (Steel) /D Non-Fire 3 4 A 55.00
Resistant Hose, D.T.D. (R.D.I.) 3951
AGS1238 Assembly of Re-usable 45 End Fitting (Steel) I/D Non-Fire 3 2 A 30.00
Resistant Hose, D.T.D. (R.D.I.) 3951
AGS1239 Union Nut (Steel) B.S.P.F. Re-usable End Fittings for I/D 2 1 A 18.00
Non-Fire Resistant Hose to Spec. D.T.D. (R.D.I.) 3951
AGS1500 Cable Bonding Clamps 10 1 I 18.00
AGS1511 Sleeves, Bonding, Metal Braided Cable, H.T. Inner, Straight, Long 9 1 A 18.00
AGS1512 Sleeves, Bonding, Metal Braided Cable, H.T. Outer, Straight 12 1 A 18.00
AGS1513 Sleeves, Bonding, Metal Braided Cable, H.T. Inner, Straight, 10 1 A 18.00
Medium
AGS1514 Sleeves, Identification Cable, H.T. Black and Red 9 1 A 18.00
AGS1515 Sleeves, Insulating Cable H.T. Black and Red 9 1 I 18.00
AGS1516 9 m/m Cable Lugs 7 1 I 18.00
AGS1517 H.T. Cable Union Nut 16 1 A 18.00
AGS1518 Thimble for H.T. Cable 7 1 I 18.00
AGS1519 L.T. Cable Union Nut 14 1 A 18.00
AGS1520 Sleeves, Bonding, Metal Braided Cable, L.T. Inner, Type A 9 1 A 18.00
AGS1521 Sleeves, Bonding, Metal Braided Cable, L.T. Outer, Type A 11 1 A 18.00
AGS1522 Sleeves, Insulating, Cable, L.T. Black and Red 5 1 A 18.00
AGS1523 Sleeves, Identification, Cable, L.T. Black and Red 8 1 A 18.00
AGS1524 7 m/m Cable Lugs 9 1 I 18.00
AGS1528 Cable Clamps for Single Metal Braided H.T. & L.T. Cables 10 1 I 18.00
AGS1530 Assembling Tools for H.T. and L.T. Braided Cable Fittings 4 1 I 18.00
AGS1531 Thimble for Cambric covered H.T. Cables 6 1 A 18.00

8
Reference Title Edition Pages Status Price

AGS1534 Bonding Clips (for Sparking Plugs & Generators) 13 1 I 18.00


AGS1536 Bonding Clips 5 1 I 18.00
AGS1537 Bonding Clips for H.T. Outer Sleeve 5 1 I 18.00
AGS1538 5 m/m Cable Lugs 6 1 I 18.00
AGS1541 Electric Cable Cleats 6 1 I 18.00
AGS1542 Electric Cable Saddles 7 1 I 18.00
AGS1551 Locking Pins 7 1 A 18.00
AGS1558 Bonding Clamps for Metal Braided Cables 14 2 I 30.00
AGS1560 Bonding Clamps for Metal Braided Cables 14 1 I 18.00
AGS1561 Split Bush for L.T. Metal Braided Cable 6 1 I 18.00
AGS1562 Switch Clamp 13 1 I 18.00
AGS1564 Cable Bonding Clamps 11 1 I 18.00
AGS1582 B.A. Washers 7 1 I 18.00
AGS1583 B.A. Washers (Double Spring) 6 1 I 18.00
AGS1591 Lugs, Connecting for Cable Assembly 4 2 I 30.00
AGS1592 Lugs, Connecting for Cable, Unisheath 4 6 1 I 18.00
AGS1593 End Cable Claw Type 6 B.A. 5 1 I 18.00
AGS1594 Ends, Cable Claw Type - 4 BA 6 1 I 18.00
AGS1595 Ends, Cable Claw Type - 2 BA 6 1 I 18.00
AGS1596 Ends, Cable Claw Type - 0 BA 6 1 I 18.00
AGS1599 Bonding Wire Socket 5 1 I 18.00
AGS1600 Cable Ends. Eye Type 6 1 I 18.00
AGS1601 Sleeves, Identification, Cable L.T. Unisheath 4, Cable 4 1 I 18.00
AGS1603 Sleeves, Identification, Cable L.T. Uniflex 4, Cable 3 1 I 18.00
AGS1606 Tubes. Cable End 8 1 A 18.00
AGS1612 Bonding Lead 3 1 I 18.00
AGS1615 Cable Ends, Eye & Fork Type, Channel End, Crimping 4, 6 & and 4 1 I 18.00
8 B.A.
AGS1616 Sleeves, Bonding, Metal Braided Cable H.T. Inner, Straight, Short 7 1 A 18.00
AGS1617 Cleats, Single Hole Attachment (Light Alloy) 4 1 I 18.00
AGS1619 Lug, Connecting for Cable, Unispark 7 4 1 I 18.00
AGS1620 Lug, Connecting for Cable, Uniflex 4 4 1 I 18.00
AGS1621 Sleeves, Identification Cable L.T. Unispark 7 Cable 4 1 I 18.00
AGS1624 Terminal (Spring Loaded Type) for Magneto 7 m/m H.T. Cables 4 3 I 45.00
AGS1625 Sleeves, Bonding, Metal Braided Cable, H.T. Outer, Curved with 6 1 I 18.00
Union Nut
AGS1630 Sleeves, Bonding, Metal Braided Cable, H.T. 8.5 m/m Cable, 6 1 I 18.00
Inner
AGS1634 Nut, Union, for H.T. Cable 6 1 A 18.00
AGS1635 Nut, Union, for L.T. Cable 5 1 A 18.00
AGS1636 Sleeves, Bonding, Metal Braided Cable L.T. Inner, Type B 4 1 A 18.00
AGS1638 Sleeves, Bonding, Metal Braided Cable, L.T. Outer, Type B 7 1 I 18.00
AGS1639 Sleeves, Bonding, Metal Braided Cable, L.T. Inner, Type C 7 1 I 18.00

9
Reference Title Edition Pages Status Price

AGS1640 Guard for Feathering Switch 2 1 I 18.00


AGS1651 Sleeves, Plain Cable, L.T. Type 1. Circular, No.1 12 1 A 18.00
AGS1652 Sleeves, Plain Cable, L.T. Type 1. Oval, No.1 13 1 A 18.00
AGS1653 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Circular Inner 13 1 A 18.00
AGS1654 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Circular 14 1 A 18.00
Outer
AGS1655 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Oval Inner 9 1 A 18.00
AGS1656 Sleeves, Bonding, Metal Braided Cable L.T. Type 2, Oval Outer 10 1 A 18.00
AGS1657 Collet 8 1 A 18.00
AGS1658 Gland Nut 14 1 A 18.00
AGS1660 Sleeves, Bonding, Metal Braided Cable, L.T. Type 3, Circular, 7 1 I 18.00
Inner
AGS1661 Water Pipe Bonding Clip (Brass) 6 1 I 18.00
AGS1662 Beads, Insulating, Type B (Cup and Ball Ended) 1 1 I 18.00
AGS1663 Cleat, Wiring, Porcelain 3 1 I 18.00
AGS1664 Cleat, Wiring, Porcelain No. 3 2 1 I 18.00
AGS1665 Insulator, Screw Eye 3 1 I 18.00
AGS1666 Cleats, Wiring, Brass, No. 2 to 8 (inclusive) 3 1 I 18.00
AGS1667 Cleat, Wiring, Brass No. 10 3 1 I 18.00
AGS1668 Cleat, Wiring, Aluminium No. 10 3 1 I 18.00
AGS1669 Cleat, Wiring, Brass No. 9 3 1 I 18.00
AGS1670 Cleat, Wiring, Aluminium No. 9 3 1 I 18.00
AGS1671 Cleats, Wiring, Aluminium No. 12 and No. 13 3 1 I 18.00
AGS1672 Cleats, Wiring, No.14 & No. 15 3 2 A 30.00
AGS1673 Cleat, Wiring, Fibre, No. 1 3 1 I 18.00
AGS1674 Cleat, Wiring, Fibre, No. 2 3 1 I 18.00
AGS1675 Cleat, Wiring, Fibre, No. 3 3 1 I 18.00
AGS1676 Cleat, Wiring, Fibre, No. 4 3 1 I 18.00
AGS1677 Cleats, Wiring, Fibre, No. 6 & 7 3 1 I 18.00
AGS1678 Cable Ends, Fork Type, Channel End, Soldering 4 1 I 18.00
AGS1681 Cable Ends, Eye Type, Channel End 4 1 I 18.00
AGS1683 Cleat, Wiring, Brass, No. 1 3 1 I 18.00
AGS1684 Cleat, Wiring, Aluminium No. 1 3 1 I 18.00
AGS1685 Staples, Insulating 3 1 I 18.00
AGS1686 Sleeves, Bonding, Metal Braided Cable, L.T. Type 4, Circular 7 1 I 18.00
Inner
AGS1687 Sleeves, Bonding, Metal Braided Cable, L.T. Type 4, Circular, 7 1 I 18.00
Outer
AGS1688 Sleeves, Plain Cable, L.T. Type 1, Circular, No. 2 8 1 I 18.00
AGS1689 Sleeves, Plain Cable, L.T. Type 1, Oval, No. 2 8 1 I 18.00
AGS1690 Cleat Wiring, Aluminium 3 1 I 18.00
AGS1691 Cable Ends Crown Eye Type. MK A to F 6 8 I 65.00
AGS1693 Cleats, Wiring, Aluminium 3 1 I 18.00
AGS1694 Cleat, Wiring, No. 2 3 1 I 18.00

10
Reference Title Edition Pages Status Price

AGS1695 Dummy Sparking Plugs, 12, 14 & 18 m/m 6 1 I 18.00


AGS1696 Bushes, Insulating Rubber 3 1 I 18.00
AGS1697 H.T. Terminal 3 1 I 18.00
AGS1703 Lug Terminal No. 1 3 1 I 18.00
AGS1704 Lug Terminal No. 2 3 1 I 18.00
AGS1705 Lug Terminal No. 3 3 1 I 18.00
AGS1706 Lug Terminal No. 8 3 1 I 18.00
AGS1710 Locknut, L.T. Union 5 1 A 18.00
AGS1711 Sleeves, Insulating Cable, L.T. 3 1 I 18.00
AGS1712 Ferrule - Cable End 3 1 I 18.00
AGS1713 L.T. Cable End 4 1 A 18.00
AGS1714 Cable Sleeve, Insulating L.T. 3 1 A 18.00
AGS1715 Lug Terminal No. 7 4 1 I 18.00
AGS1716 Insulating Sleeve (for H.T. Ignition Cable Sparking Plug Terminal) 2 1 A 18.00
AGS1722 Sleeves, Bonding, Metal Braided Cable, L.T. Type 5, Circular 5 1 I 18.00
Inner & Outer
AGS1723 Sleeves, Bonding, Metal Braided Cable, R.T. Type 5, Circular 5 1 I 18.00
Inner
AGS1724 Sleeves, Bonding, Metal Braided Cable, R.T. Type 5, Circular 5 1 I 18.00
Outer
AGS1725 Blanking Discs. (For use under Gland Nuts where Cable Sleeves 7 1 I 18.00
are not fitted)
AGS1726 Sleeves, Bonding, Metal Braided Cable, L.T. Type 6, Circular 6 1 I 18.00
Inner & Outer
AGS1727 Sleeves, Bonding, Metal Braided Cable, L.T. Type 7, Circular, 6 1 I 18.00
Inner
AGS1729 Sleeves, Bonding, Metal Braided Cable, L.T. Type 7, Circular, 4 1 I 18.00
Outer
AGS1731 Sleeves, Outer, Circular (for Cable Electric, L.T. Metal Braided) 4 1 I 18.00
AGS1732 Sleeves, Bonding, Metal Braided Cable, L.T. Type 8, Circular 6 1 I 18.00
Inner & Outer
AGS1733 Sleeves, Plain Cable, L.T. Type 1, Circular, No.3 8 1 I 18.00
AGS1734 Sleeves, Bonding, Metal Braided Cable, L.T. Type 9, Circular, 6 1 I 18.00
Inner
AGS1735 Sleeves, Bonding, Metal Braided Cable, L.T. Type 9, Circular, 5 1 I 18.00
Outer
AGS1737 Lug Terminal No. 10 & 11 3 1 I 18.00
AGS1738 Lug Terminal No. 12 & 13 4 1 I 18.00
AGS1739 Lug Terminal No. 14 3 1 I 18.00
AGS1740 Lug Terminal No. 15 3 1 I 18.00
AGS1741 Lug Terminal No. 16 & 31 3 1 I 18.00
AGS1744 Lug Terminal No. 17 4 1 I 18.00
AGS1745 Terminal Eyelet 3 1 I 18.00
AGS1746 Lug Terminal No. 18 3 1 I 18.00
AGS1747 Lug Terminal No. 19, 23, 24, 27 5 1 I 18.00
AGS1748 Lug Terminal No. 22 (D.C. Output on UKN Generator) 3 1 I 18.00

11
Reference Title Edition Pages Status Price

AGS1749 Lug Terminal No. 28 & 29 3 1 I 18.00


AGS1753 Combined Screw & Washer, 4 B.A. 5 2 I 30.00
AGS1754 Combined Screw & Washer, 6 B.A. 5 2 I 30.00
AGS1756 Connector, Bonding, Flanged, (Round) 5 1 I 18.00
AGS1757 Connector, Bonding, Flanged, (Oval) 4 1 I 18.00
AGS1759 Terminals, Instrument (Single) 2 2 A 30.00
AGS1760 Terminals, Instrument (Double) 2 2 A 30.00
AGS1761 Lug Terminal No. 25 3 1 I 18.00
AGS1762 Sleeves, Cable, Single (Weather Proofing) 4 1 I 18.00
AGS1763 Sleeves, Cable, Twin (Weather Proofing) 4 1 I 18.00
AGS1764 Sleeves, Cable, Single, Weather Proofing (with Twin Cable 4 1 I 18.00
Flanges)
AGS1765 Arrangement of Spring Cover for Buttons, Push 8 5 I 60.00
AGS1766 Sleeve, Cable Lug (Weather Proofing) 2 1 I 18.00
AGS1767 Cable End Fitting for Magneto Low Tension Connection 2 1 A 18.00
AGS2000 A.G.S. Stiffnuts - Application 14 3 A 45.00
AGS2001 Stiffnuts - Hexagon - Thick 14 1 I 18.00
AGS2002 Stiffnuts - Hexagon - Thin 14 1 I 18.00
AGS2003 Stiffnuts - Hexagon - Countersunk 14 1 I 18.00
AGS2004 Stiffnuts - Single Anchor - Thick 9 1 I 18.00
AGS2005 Stiffnuts - Single Anchor - Thin 9 1 I 18.00
AGS2006 Stiffnuts - Single Anchor - Countersunk 9 1 I 18.00
AGS2007 Stiffnuts - Double Anchor - Thick 14 1 I 18.00
AGS2008 Stiffnuts - Double Anchor - Thin 16 1 I 18.00
AGS2009 Stiffnuts - Double Anchor - Countersunk 14 1 I 18.00
AGS2010 Stiffnuts - Clinch Nuts. Type: Simmonds and Oddie 8 1 I 18.00
AGS2011 Stiffnuts - Clinch 18 1 I 18.00
AGS2012 Stiffnuts - Floating Anchor - Thick 14 1 I 18.00
AGS2013 Stiffnuts - Floating Anchor - Thick 15 1 I 18.00
AGS2014 Stiffnuts - Floating Anchor - Countersunk 14 1 I 18.00
AGS2015 Stiffnuts - Stripnuts - Thick 14 1 I 18.00
AGS2016 Stiffnuts - Stripnuts - Thin 15 1 I 18.00
AGS2017 Stiffnuts - Stripnuts - Countersunk 14 1 I 18.00
AGS2018 Stiffnuts - Single Anchor - Thick 12 1 I 18.00
AGS2019 Stiffnuts - Stripnuts - Thin 12 1 I 18.00
AGS2020 Stiffnuts - Stripnuts - Countersunk 13 1 I 18.00
AGS2021 Stiffnuts - Translucent Cap 12 1 I 18.00
AGS2023 Stiffnuts, Double Anchor, with Translucent cap 12 1 I 18.00
AGS2034 Lock Washers: Shakeproof Flat, External Teeth, Steel 9 1 I 18.00
AGS2035 Lock Washers: Shakeproof Flat, Internal Teeth, Steel 9 1 I 18.00
AGS2036 Lock Washers: Shakeproof Countersunk, External Teeth, Steel 7 1 I 18.00
AGS2037 Lockwashers: Shakeproof Flat, Internal Teeth Phos. Bronze 6 1 I 18.00

12
Reference Title Edition Pages Status Price

AGS2038 Rivets, Chobert, Mandrels 3 1 A 18.00


AGS2039 Rivets, Blind, A.G.S. (Chobert & Tucker), Application 3 1 A 18.00
AGS2040 Rivets, Chobert, Steel D.T.D. 720 Snap Head 7 1 A 18.00
AGS2041 Rivets, Chobert, 120 (Steel) D.T.D. 720 Countersunk Head 5 1 A 18.00
AGS2042 Rivets, Chobert, Steel, Pins. Sealing 7 1 A 18.00
AGS2043 Rivets, Chobert, Aluminium Alloy (L.37) Snap Head 5 1 A 18.00
AGS2044 Rivets, Chobert, 120 (Aluminium Alloy) L.37 Countersunk Head 4 1 A 18.00
AGS2045 Rivets, Chobert, Aluminium Alloy Snap Head 6 1 A 18.00
AGS2046 Rivets, Chobert, 120 (Aluminium Alloy) Countersunk Head 6 1 A 18.00
AGS2047 Rivets, Chobert, Aluminium Alloy, Pins. Sealing 9 1 A 18.00
m
AGS2048 Rivets, Tucker. Alum Alloy Pop Domed Head 6 1 I 18.00
m
AGS2049 Rivets, Tucker. Alum Alloy Pop, Countersunk Head 7 1 I 18.00
(SUPERSEDED BY AGS4718)
AGS2050 Rivets, Tucker, Monel, Pop Domed Head 6 1 A 18.00
AGS2051 Rivets, Tucker, Monel Pop Countersunk Head 7 1 I 18.00
AGS2052 Mandrels for Tucker Open Aluminium and Monel Domed and 9 3 A 45.00
Countersunk Head Rivets
AGS2053 Rivets, Tucker. Alumm Alloy Cup Domed Head 4 1 I 18.00
AGS2054 Rivets, Tucker. Alumm Alloy Cup Countersunk Head 4 1 I 18.00
AGS2055 Rivets, Tucker, Monel, Cup, Domed Head 3 1 A 18.00
AGS2056 Rivets, Tucker, Monel, Cup, Countersunk Head 3 1 A 18.00
AGS2059 Rivets, Tucker, Monel, Pop Domed Head (Unplated) 5 1 A 18.00
AGS2060 Rivets, Tucker, Monel Pop Countersunk Head (Unplated) 5 1 I 18.00
AGS2065 Avdel Self Sealing Snap Head Rivets (Aluminium Alloy) 7 1 A 18.00
AGS2066 Avdel Self Sealing 100 Countersunk Rivets (Aluminium Alloy) 7 1 A 18.00
AGS2067 Chobert, 100 Countersunk Rivet. Steel 6 1 A 18.00
AGS2068 Chobert, 100 Countersunk Rivet. Aluminium Alloy 5 1 A 18.00
AGS2069 Chobert, 100 Countersunk Rivets 4 1 I 18.00
AGS2070 Rivets, Tucker, 100 Monel Pop Countersunk Head (Plated) 4 1 A 18.00
AGS2071 Rivets, Tucker, 100 Monel Pop Countersunk Head (Unplated) 4 1 A 18.00
AGS2072 Washer, Tin Plated to D.T.D. 924 1 1 A 18.00
AGS2073 Rivets, Tucker. Alumm Alloy Pop Countersunk Head 2 1 I 18.00
m
AGS2074 Rivets, Tucker. Alum Alloy Pop Domed Head 2 1 I 18.00
3
AGS2080 Pipe Clip, Rubber covered for /16 DIA. Fixing 9 1 A 18.00
3
AGS2081 Pipe Clip for /16 DIA. Fixing, Rubber covered, with Earthing 11 1 A 18.00
Tongue
AGS2082 Pipe Clip, Rubber covered for DIA. Fixing 8 1 A 18.00
AGS2083 Pipe Clip for DIA. Fixing, Rubber covered with Earthing 9 1 A 18.00
Tongue
AGS2084 Typical Assembly of Non-Reversible Pipe Couplings 3 1 A 18.00
m
AGS2085 Special Pipe Couplings (Alum Alloy) Outer Sleeve 5 4 A 55.00
AGS2086 Non Return Valve, Safety Guard 2 1 I 18.00
AGS2087 Non Return Valve Safety Guard Securing Ring 1 1 A 18.00
AGS2088 Pipe Identification Band for use in Hot Zones (1 wide) 5 1 A 18.00

13
Reference Title Edition Pages Status Price

AGS2089 Clip Identification Band 4 1 A 18.00


AGS2090 Pipe Identification Band for use in Hot Zones (1.0 wide) 5 1 A 18.00
AGS2091 Clip Identification Band 4 1 A 18.00
AGS2092 Pipe Identification Band for use in Hot Zones ( wide) 5 1 A 18.00
AGS2093 Clip Identification Band 4 1 A 18.00
AGS2094 Flow Direction Indicator Bands for use in Hot Zones 5 1 A 18.00
AGS2095 Clip Identification Band 4 1 A 18.00
AGS2096 Test for " B.S.P.F. Air & Hydraulic Charging Valve System 5 4 A 55.00
AGS2097 Bonding, Flexible - General 5 1 A 18.00
AGS2098 Securing Ring, Compression Tube 1 1 A 18.00
AGS2099 Method of Assembling Safety Guard & Securing Ring on N.R.V. 1 1 A 18.00
AGS2100 High Temperature Bonding Leads 1 1 A 18.00
AGS2101 Pipe Support Clip 2 1 A 18.00
AGS2104 Pipe Bonding and Support Clip 2 1 A 18.00
AGS2105 Pip Pins, Push-Pull 6 2 A 30.00
AGS2106 Push Type Pip Pin with Handle 3 1 A 18.00
3
AGS2107 /16 DIA. Pull Type Pip Pin 5 1 A 18.00
AGS2108 Protective Plugs for Plain Bores. to 2 DIA. 2 1 A 18.00
AGS2109 Protective Plugs to suit B.S.P.F. Threads 2 1 A 18.00
AGS2110 Transport/Protective, for 20 Flanges 5 1 I 18.00
AGS2111 Pipe Coupling (Aluminium Alloy) B.S.P.F. Outer Sleeve 6 1 A 18.00
AGS2112 Protection Plug 2 1 A 18.00
AGS2113 Protection Plug 2 1 A 18.00
AGS2114-117 Clip Identification Band 4 1 A 18.00
AGS2118 Cap, Sealing - Shallow Drawn B.S.P.F. - Metal (for Inhibited Units) 1 1 A 18.00
AGS2119 Cap, Sealing - Deep Drawn B.S.P.F. - Metal (for Inhibited Units) 1 1 A 18.00
AGS2120 Pipe Couplings, Nipple 5 1 A 18.00
AGS3005 Studs U.N.F. High Duty 3 1 A 18.00
3
AGS3006 Studs /16 U.N.F. High Duty 3 1 A 18.00
3
AGS3007 Studs /8 U.N.F. High Duty 3 1 A 18.00
AGS3012 Pipe Couplings (Steel). Cone Union Adaptor/Unified Attachment 7 2 A 30.00
End 3/16 to , for use with Parallel Gaskets (e.g. Bonded Seals)
AGS3013 Pipe Couplings (Steel). Union Adaptor/Unified Attachment End 7 6 A 60.00
3
/16 to , for use with Parallel Gaskets (e.g. Bonded Seals)
AGS3014 Dimensions of Tapped Bosses with Unified Threads, for Pipe 4 1 A 18.00
Coupling Union Adaptors, using Parallel Gaskets (eg Bonded
Seals)

AGS3016 Pipe Couplings (Steel) Cone Union Adaptor unified at Attachment 8 2 I 30.00
End 3/16 to , for use with O Ring Gaskets (and 10050) or
equivalent AGS 3018 Tapped Bosses
AGS3017 Pipe Couplings (Steel) Unified Adaptor / Unified Attachment End 8 6 I 60.00
3
/16 to , for use with O Ring Gaskets (and 10050) or equivalent
AGS 3018 Tapped Bosses
AGS3018 Dimensions of Tapped Bosses with Unified Threads for Pipe 5 1 I 18.00
Coupling Union Adaptors, using O Ring (e.g. U.S. AN.6290 or

14
Reference Title Edition Pages Status Price

equivalent) Gaskets
AGS3020 Protection Plug 5 1 I 18.00
AGS3021 Protective Cap 3 1 I 18.00
AGS3022 Ball Joint 1 1 A 18.00
AGS3023 Socket for Ball Joint 1 1 A 18.00
AGS3024 Ball for Ball Joint 1 1 A 18.00
AGS3025 Plug for Ball Joint 1 1 A 18.00
AGS3026 G.A. of Bore Drain Cock (No. 1 size) 1 1 A 18.00
AGS3027 Body for Drain Cock 4 1 A 18.00
AGS3028 Plug for Drain Cock 1 1 A 18.00
AGS3029 Nut for Drain Cock 1 1 A 18.00
AGS3030 G.A. of Bore Drain Cock (No. 2 size) 1 1 A 18.00
AGS3031 Body for Drain Cock 1 1 A 18.00
AGS3032 Plug for Drain Cock 1 1 A 18.00
AGS3033 Nut for Drain Cock 1 1 A 18.00
9
AGS3034 Test of /16 U.N.F. (Air & Mineral Base Hydraulic Fluid) 5 4 A 55.00
AGS3035 UN Thread Identification Label (Metal) 1 1 A 18.00
AGS3036 UN Thread Identification Label (Adhesive) 2 1 A 18.00
AGS3037 Avlok 4 B.A. & No. 6 U.N.C. Blind Anchor Nuts (Steel) 1 1 A 18.00
AGS3038 Avlok 2 B.A., No. 10 U.N.F. & No. 8 U.N.C. Blind Anchor Nuts 1 1 A 18.00
(Steel)
AGS3039 Avlok B.S.F. and U.N.F. Blind Anchor Nuts (Steel) 1 1 A 18.00
AGS3040 Avlok 5/16 B.S.F. and 5/16 U.N.F. Blind Anchor Nuts (Steel) 1 1 A 18.00
AGS3041 Cage for Blind Nuts 1 1 A 18.00
AGS3042 Cage for Blind Nuts 1 1 A 18.00
AGS3043 Cage for Blind Nuts 1 2 A 30.00
AGS3044 Nut for AGS 3041 Cage 1 1 A 18.00
AGS3045 Nut for AGS 3042 Cage 1 1 A 18.00
AGS3046 Nut for AGS 3043 Cage 1 1 A 18.00
AGS3047 Nut for AGS 3043 Cage 1 1 A 18.00
AGS3048 Fitting Data for Avlock Blind Nuts 1 1 A 18.00
AGS3049 Pipe Couplings, Bleeder Screw, " U.N.F. 6 1 A 18.00
AGS3050-069 Rose Self Aligning Spherical Bearing Rod Ends. Unified Female 3 2 A 30.00
Series
AGS3070-089 Rose Self Aligning Spherical Bearing Rod Ends. Unified Male 2 2 A 30.00
Series
AGS3090 .4375 - 20 UNJF - 3 B Tapped Hole for Instruments (Pressure) 3 1 A 18.00
AGS3091 .500 - 20 UNJF - 3 B Tapped Hole for Instruments (Static) 3 1 A 18.00
AGS3092 Pitot Connector (Screwed) 4 1 A 18.00
AGS3093 Pitot Connector (Plain 5/16 DIA.) 6 1 A 18.00
AGS3094 Static Connector (Screwed) 4 1 A 18.00
3
AGS3095 Static Connector (Plain /8 DIA.) 6 1 A 18.00
AGS3096 Connector B.S. Pipe with Female Cone 3 1 I 18.00
AGS3097 Connector UNF. with Female Cone 3 1 I 18.00

15
Reference Title Edition Pages Status Price

AGS3098-099 Gasket - O Ring 2 1 A 18.00


AGS3401 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5/16 1 1 A 18.00
DIA. Tubing with Drain Trap
AGS3402 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5/16 1 1 A 18.00
DIA. Tubing - Tee Union
AGS3403 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5/16 1 1 A 18.00
DIA. Tubing - Elbow Union
AGS3404 Assembly of Mark 1 Aluminium Alloy Low Pressure Unions 5/16 1 1 A 18.00
DIA. Tubing - Straight Union
AGS3405 Straight Union Body - Unified 4 1 A 18.00
AGS3406 Tee Union Body - Unified 3 1 A 18.00
AGS3407 Elbow Union Body - Unified 3 1 A 18.00
AGS3408 Drain Trap - Unified 4 1 A 18.00
AGS3409 Washer 1 1 A 18.00
AGS3410 Union Nut - 5/16 O/D Pipe, Unified 5 1 A 18.00
5
AGS3411 Bush for use with /16 Pipe Union Nut 3 1 A 18.00
AGS3412 Assembly of Union Nut and Bush - Unified 2 1 A 18.00
AGS3413 Wing Nuts 2 1 A 18.00
AGS3414 Special Pipe Couplings (Aluminium Alloy) Outer Sleeve 4 1 A 18.00
AGS3415 Non Return Valve, Safety Guard for use with " B.S.P.F. Thread 1 1 A 18.00
AGS3420 Flanged Mounting 3 1 A 18.00
AGS3421 Locking Plate 3 1 A 18.00
AGS3422 Straight Union (Pitot) 4 1 A 18.00
AGS3423 Elbow Union (Pitot) 4 1 A 18.00
AGS3424 Straight Union (Static) 4 1 A 18.00
AGS3425 Elbow Union (Static) 4 1 A 18.00
AGS3426 Plug - Sealing unified Threads for inhibited Units 3 1 I 18.00
AGS3427 Cap - Sealing, Shallow Drawn, unified - Metal (for inhibited Units) 3 1 I 18.00
AGS3429 Flexible Hose Assembly - Pitot 2 1 A 18.00
AGS3430 Flexible Hose Assembly - Static 2 1 A 18.00
AGS3431 Pipe Clip Rubber covered for DIA. Fixing. (for Pipes 1 DIA. 4 1 A 18.00
& over)
AGS3432 Pipe Clip Rubber covered for DIA. Fixing with Earthing 4 1 A 18.00
Tongue (for Pipes 1 DIA. & over)
AGS3433 Drain Trap, Internal, Straight Union. (Pitot) 1 1 A 18.00
AGS3434 Drain Trap, Internal, Elbow Union. (Pitot) 1 1 A 18.00
AGS3435 Drain Trap, Internal, Straight Union. (Static) 1 1 A 18.00
AGS3436 Drain Trap, Internal, Elbow Union. (Static) 1 1 A 18.00
AGS3437 Drain Trap, External, Straight Union. (Pitot) 1 1 A 18.00
AGS3438 Drain Trap, External, Elbow Union. (Pitot) 1 1 A 18.00
AGS3439 Drain Trap, External, Straight Union. (Static) 1 1 A 18.00
AGS3440 Drain Trap, External, Elbow Union. (Static) 1 1 A 18.00
AGS3441 Pipe Identification Band for use in Hot Zones ( wide) 3 1 A 18.00
AGS3442 Pipe Warning Symbol Bands for use in Hot Zones ( wide) 3 1 A 18.00

16
Reference Title Edition Pages Status Price

AGS3500 Connector 1/8 B.S. Pipe with Female Cone 2 1 A 18.00


AGS3501 Connector 3/8 B.S. Pipe with Female Cone 2 1 A 18.00
AGS3600-699 Insert, Screw Thread, Unified, Screw Locking, Helical Coil, 4 4 A 55.00
Corrosion Resistant Steel DTD734, Cadmium plated
AGS3700-799 Insert, Screw Thread, Unified, Screw Locking, Helical Coil, H.R. 4 2 A 30.00
Alloy BS HR503. Source control Drawing
AGS3800 Cover for 10,000 lb. Lashing Fitting Base 2 1 A 18.00
AGS3801 Cover for 25,000 lb. Lashing Fitting Base 2 1 A 18.00
AGS3802-804 Plugs - Protection, and Sealing, for Inhibited Units, Unified 4 1 A 18.00
Threads

AGS3805-807 Caps - Protection, and Sealing, for Inhibited Units, Unified 2 1 A 18.00
Threads
AGS3808 Bearings, Airframe, Self Lubricating. Plain Cylindrical - Alumm 1 2 A 30.00
Alloy Shell
AGS3809 Bearings, Airframe, Self Lubricating. Plain Cylindrical Steel Shell 1 2 A 30.00
AGS3810 Bearings, Airframe Self Lubricating. Flanged Cylindrical - Alumm 1 2 A 30.00
Alloy Shell
AGS3811 Bearings, Airframe Self Lubricating. Flanged Cylindrical Steel 1 2 A 30.00
Shell
AGS3812 Bearing, Self-aligning, Grooved Outer Ring, P.T.F.E. Lined, Wide 3 2 I 30.00
AGS3813 Bearing, Self-aligning, Grooved Outer Ring, P.T.F.E. Lined, 3 2 I 30.00
Narrow
AGS3814 Bearing, Self-aligning, Plain Outer Ring, P.T.F.E. Lined, Wide 3 2 I 30.00
AGS3815 Bearing, Self-aligning, Plain Outer Ring, P.T.F.E. Lined, Narrow 3 2 I 30.00
AGS3816 Cover for 5,000 lb. Lashing Fitting Base 2 1 A 18.00
AGS3820-869 Washer, Seal, Flat 1 1 A 18.00
AGS3870-889 Gasket (Corrujoint) 2 1 A 18.00
AGS3890-909 Gasket (Corrujoint) 1 1 A 18.00
AGS3910 Dimensions for Close Tolerance Tapped Bosses with Unified 2 2 A 30.00.
Threads for Pipe Coupling Union Adaptors using Pipe Fitting O
Ring Seals, eg. AS43003. (Recommended for use with pressures
above2500 lbf/in2. For pressures up to 2500 lbf/in2, AGS 3911
recommended)
AGS3911 Dimensions of Medium Tolerance Tapped Bosses with Unified 2 2 A 30.00
Threads for Pipe Coupling Union Adaptors using Pipe Fitting O
Ring Seals, eg. AS43003. (Recommended for use with pressures
above 2500 lbf/in2. For pressures up to 2500 lbf/in2, AGS 3910 is
recommended)
AGS3912 Cone, Union Adaptor, Steel (Pipe Couplings Whitworth/UNJF) 4 2 A 30.00
AGS3913 Union Adaptor, Steel (Pipe Couplings Whitworth/UNJF) 2 6 A 60.00
AGS3914 Hose Assembly, Flexible - Pitot (Metric) Source Control Drawing 1 2 A 30.00
AGS3915 Hose Assembly, Flexible - Static (Metric) Source Control Drawing 1 2 A 30.00
AGS3920 Rivet, Blind, Snap Head, Self Plugging, Interference Lock(Avdel), 3 4 A 55.00
Corrosion Resisting Steel
AGS3921 Rivet, Blind, 100 Countersunk Head, Self Plugging, Interference 3 4 A 55.00
Lock (Avdel), Corrosion Resisting Steel
AGS3922 Rivet, Blind, Snap Head, Self Plugging, Interference Lock (Avdel) 4 4 A 55.00
Corrosion Resisting Steel, Cadmium Coated

17
Reference Title Edition Pages Status Price

AGS3923 Rivet, Blind, 100 Countersunk Head, Self Plugging, Interference 4 4 A 35500
Lock (Avdel), Corrosion Resisting Steel, Cadmium Coated
AGS3924 Clamp, Hose, Worm Drive, 'Microflex' (Extra Light Duty) 2 1 A 18.00
AGS3925 Clamp, Hose, Worm Drive 'Minox', (Light Duty) 2 1 A 18.00
AGS4670 Sealed, Bonded - with P.T.F.E. Locating Ring 2 1 A 18.00
AGS4671 Ring, Locating P.T.F.E. 2 1 A 18.00
AGS4672 Servicing Point Emblem - Self Adhesive 2 6 A 60.00
AGS4673 Maintenance Point Emblem - Self Adhesive 2 5 A 60.00
AGS4674 Ground Handling Point Emblem - Self Adhesive 4 4 A 55.00
AGS4675 Safety/Hazard Emblem - Self Adhesive 2 3 A 45.00
AGS4676 Armament Handling Point Emblem - Self Adhesive 2 4 A 55.00
AGS4677 Insert, Screw Thread, Metric, Screw Locking, Helical Coil, 3 2 A 30.00
Corrosion Resistant Steel DTD 734, Cadmium Plated
AGS4678 Thread Insert - Metric - Solid Wall, s/locking - Alloy Steel, Cad. 1 2 A 30.00
Plated
AGS4714 Call up of Glass Fibre Tape System Identification Markers 2 2 A 30.00
AGS4715 Union Nut Re-usable End Fittings for Non Fire Resistant Hose 1 1 A 18.00
AGS4716 Rivet, Self Sealing 120 Countersunk Avdel, Aluminium Alloy 2 3 I 45.00
AGS4717 Rivet, Tucker Pop Aluminium Alloy Domed Head 3 2 A 30.00
AGS4718 Rivet, Tucker Pop, Aluminium Alloy, Countersunk Head 4 2 I 30.00
AGS4719 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 7 2 A 30.00
Spindle, Aluminium Alloy, Universal Head
AGS4720 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 7 2 A 30.00
Spindle, Aluminium Alloy, 100 Countersunk Head

18
AS Specifications

19
Reference Title Edition Pages Status Price

AS1 Titanium Alloy Bolts Hexagon Heads Unified Thread and Close 3 2 I 30.00
Tolerance Shanks
AS2 Titanium Alloy Bolts, 100 Countersunk Heads and Unified 3 2 I 30.00
Threads
AS100 Handwheel 6 Diameter 5 1 I 18.00
AS101 Handwheel 8 Diameter 4 1 I 18.00
AS102 Handwheel 10 Diameter 5 1 I 18.00
AS103 Pulley Ballbearing 2.0 DIA. 7 1 A 18.00
AS104 Pulley Ballbearing 3.0 DIA. 8 1 A 18.00
AS105 Pulley Ballbearing 4.0 DIA. 8 1 A 18.00
AS106 Pulley Ballbearing 5.0 DIA. 8 1 A 18.00
AS107 Pulley, Shrouded (Single) 5 1 I 18.00
AS108 Pulley, Shrouded (Twin) 5 1 I 18.00
AS109 Pulley, Shrouded (Triple) 5 1 I 18.00
AS110 Pulley, Shrouded (Quadruple) 5 1 I 18.00
AS111 Pulley Ballbearing 1.15 DIA. 12 1 A 18.00
AS112 Cover (for Pulley) 4 1 I 18.00
AS113 Cover with Spacer (for Pulley) 5 1 I 18.00
AS114 Spacer (for Pulley) 5 1 I 18.00
AS116 Assembly of Filler Cap, 2 7 1 I 18.00
AS117 Body, Filler Cap, 2 4 1 I 18.00
AS119 Seating Ring, Filler Cap, 2 3 1 I 18.00
AS120 Locking Ring, Filler Cap, 2 2 1 I 18.00
AS122 Stud, Filler Cap 4 1 I 18.00
AS123 Nut Ring, Filler Cap, 2 4 1 I 18.00
AS124 Assembly of Filler Cap, 3 7 1 I 18.00
AS125 Body, Filler Cap, 3 4 1 I 18.00
AS127 Seating Ring, Filler Cap, 3 3 1 I 18.00
AS128 Locking Ring, Filler Cap, 3 2 1 I 18.00
AS129 Nut Ring, Filler Cap, 3 4 1 I 18.00
AS130 Spanner for Filler Caps 3 1 I 18.00
AS133 Couple for Box Single Lever Parachute Control 4 1 A 18.00
AS134 Lever Hand - Assembly 4 1 A 18.00
AS135 Knob (Hand Lever) 5 1 I 18.00
AS136 Lever - Jettison 5 1 A 18.00
AS139 Plunger - Jettison 4 1 A 18.00
AS140 Spring 5 1 A 18.00
AS144 Bush 4 1 A 18.00
AS145 Shim 4 1 A 18.00
AS149 Lever (Stream) 5 1 A 18.00
AS152 Handwheel 3 Diameter 6 1 A 18.00
AS153 Lever - Hand 3 1 A 18.00
AS154 Housing - Plunger 3 1 A 18.00
AS155 Rivet, Snap Head 10 1 I 18.00

20
Reference Title Edition Pages Status Price

AS156 Rivet, Snap Head 9 1 I 18.00


AS157 Rivet, Snap Head 11 1 I 18.00
AS158 Rivet, Mushroom Head 8 1 I 18.00
AS159 Rivet, Mushroom Head 11 1 I 18.00
AS160 Rivet, Countersunk 90 11 1 I 18.00
AS161 Rivet, Countersunk 90 12 1 I 18.00
AS162 Rivet, Countersunk 90 13 1 I 18.00
AS163 Rivet, Countersunk 120 12 1 I 18.00
AS164 Rivet, Countersunk 120 11 1 I 18.00
AS165 Rivet, Countersunk 120 14 1 I 18.00
AS166 Assembly of Accumulator Tray, 12 Volt, 40 A.H 4 1 I 18.00
AS167 Assembly of Accumulator Tray, 12 Volt, 15 & 25 A.H 4 1 I 18.00
AS168 Nut and Bolt Assembly (for Chains) 4 1 A 18.00
AS169 Base, Insulating Mast (for use with AS170) 4 1 I 18.00
AS170 Aerial Mast (Fighter Type) 2 1 I 18.00
AS171 Assembly of Chain to Connector 5 1 I 18.00
AS172 Assembly of Chain to Cable Spool 9 1 A 18.00
AS173 Assembly of Chain to Bi-Planar Block 5 1 A 18.00
AS174 Assembly of Chain End Bolt 10 1 A 18.00
AS175 Assembly of Chain End Bolt (Roller omitted) 10 1 A 18.00
AS176 Assembly of Chain to Cable Spool 8 1 A 18.00
AS177 Chain Assembly (Inner Link at end) 5 1 A 18.00
AS178-185 Connector, Chain - Internal Thread 4 1 I 18.00
AS186 Chain Assembly (Inner Link at end) 5 1 A 18.00
AS187 Assembly of Chain to Connector - 4BA 4 1 I 18.00
AS188-194 Cable Spool, Chain 4 1 A 18.00
AS195-198 Bi-planar Block, Chain 3 1 A 18.00
AS200-209 B.SI Chain (8mm Pitch) & Fittings Assembly Code 9 1 I 18.00
AS210-230 B.S2 Chain ( Pitch) & Fittings Assembly Code 7 1 I 18.00
AS231-245 B.S4 Chain ( Pitch) & Fittings Assembly Code 7 1 I 18.00
AS246-266 B.S6 Chain ( Pitch) & Fittings Assembly Code 8 1 I 18.00
AS267-276 B.SI Chain (8mm Pitch) & Fittings Assembly Code 8 1 I 18.00
AS277-297 B.S2 Chain ( Pitch) & Fittings Assembly Code 7 1 I 18.00
AS298-312 B.S4 Chain ( Pitch) & Fittings Assembly Code 7 1 I 18.00
AS313-333 B.S6 Chain ( Pitch) & Fittings Assembly Code 8 1 I 18.00
AS334-343 B.SI Chain (8mm Pitch) & Fittings Assembly Code 8 1 I 18.00
AS344-364 B.S2 Chain ( Pitch) & Fittings Assembly Code 7 1 I 18.00
AS365-379 B.S4 Chain ( Pitch) & Fittings Assembly Code 7 1 I 18.00
AS380-400 B.S6 Chain ( Pitch) & Fittings Assembly Code 8 1 I 18.00
AS402 Valve for Drain Valve 4 1 I 18.00
AS403 Valve Guide (for Drain Valve) 5 1 I 18.00
AS404 Spring (for Drain Valve) 4 1 I 18.00
AS405 Body (for Drain Valve) 6 1 I 18.00

21
Reference Title Edition Pages Status Price

AS407 Sealing Ring (for Fuel Drain Valve) 5 1 I 18.00


AS408 Plug (for Fuel Drain Valve) 3 1 I 18.00
AS409 Nut Ring (for Drain Valve) 4 1 I 18.00
AS410 Washer, Joint 5 1 I 18.00
AS411 Withdrawal Ring, Fuel Drain Valve 2 1 I 18.00
AS413 Valve Lifter for Fuel Drain Valve 4 1 I 18.00
AS414 Tray, Accumulator, 12 Volt 40 AH 7 1 I 18.00
AS415 Bolt Assembly - Attachment of Lead-Acid Accumulators 5 1 I 18.00
(AS166/167)
AS416 Bolt - Detail - Accumulator Attachment 4 1 I 18.00
AS420 Washer Plate - Accumulator Attachment 5 1 I 18.00
AS421 Keep Ring (for Bolt Assembly) 4 1 I 18.00
AS422 Tray, Accumulator, 12 Volt 15 & 25 AH 6 1 I 18.00
AS423 Assembly of Stowage for Parachute Pack 4 1 I 18.00
AS424 Top Bracket - Parachute Stowage 4 1 I 18.00
AS425 Bottom Bracket - Parachute Stowage 4 1 I 18.00
AS426 Retaining Cord - Parachute Stowage 3 1 I 18.00
AS427 Tube - Parachute Stowage 3 1 I 18.00
AS428 Stowage for Range-Finder 3 1 I 18.00
AS429 Strap Assembly for Range-Finder Stowage 2 1 I 18.00
AS431 Spring - Stowage - Map 2 1 I 18.00
AS432 Stowage - Map 3 1 I 18.00
AS433 Spacer for Pipe Clamp Blocks 5 1 I 18.00
AS435 Retainer - Stowage, Signal Lamp 4 1 I 18.00
AS439 Pipe Clamp, Self-Bonding (Typical Assembly) 7 1 I 18.00
AS440 Pipe Clamp Block, (3/16 DIA) 6 1 I 18.00
7
AS441 Pipe Clamp Block, ( /32 DIA) 6 1 I 18.00
AS442 Pipe Clamp Block, ( DIA) 6 1 I 18.00
5
AS443 Pipe Clamp Block ( /16 DIA) 6 1 I 18.00
AS444 Pipe Clamp Block ( DIA) 6 1 I 18.00
AS445 Pipe Clamp Block ( DIA) 6 1 I 18.00
AS446 Pipe Clamp Block ( DIA) 6 1 I 18.00
AS447 Pipe Clamp Block ( DIA) 6 1 I 18.00
AS448 Bolt Block 6 1 I 18.00
AS449 Channel (for Self Bonding Pipe Clamp) 5 1 I 18.00
AS450 Pipe Clamp Stud 6 1 I 18.00
AS451 Vacuum Flask Stowage, 2 Unit 5 1 I 18.00
AS452 Vacuum Flask Stowage, 1 Unit 5 1 I 18.00
AS454 Pipe Clamp Block (.272 DIA) 6 1 I 18.00
AS455 Rivet, Snap Head 3 1 I 18.00
AS457 Rivet, Snap Head 6 1 I 18.00
AS458 Rivet, Snap Head 4 1 I 18.00
AS459 Rivet, Snap Head 2 1 I 18.00
AS460 Rivet, Countersunk 90 2 1 I 18.00

22
Reference Title Edition Pages Status Price

AS462 Rivet, Countersunk 90 6 2 I 30.00


AS463 Rivet, Countersunk 120 3 1 I 18.00
AS465 Rivet, Countersunk 120 6 2 I 30.00
AS466 Rivet, Countersunk 90 4 1 I 18.00
AS467 Rivet, Countersunk 90 5 1 I 18.00
AS468 Rivet, Countersunk 120 4 1 I 18.00
AS469 Rivet, Flat Head 3 1 A 18.00
AS470 Washers Packing, .05 Thick 3 1 I 18.00
AS471 Washers Packing, .10 Thick 3 1 I 18.00
AS472 Tube Launching (4 Flare) 3 1 I 18.00
AS473 Anti-Spin Parachute Jettison Slip 6 1 I 18.00
AS474 Body - Anti-Spin Parachute Jettison Slip 2 1 I 18.00
AS475 Slip Catch - Anti-Spin Parachute Jettison Slip 2 1 I 18.00
AS476 Release Lever - Anti-Spin Parachute Jettison Slip 3 1 I 18.00
AS477 Roller - Anti-Spin Parachute Jettison Slip 2 1 I 18.00
AS478 Bobbin - Anti-Spin Parachute Jettison Slip 2 1 I 18.00
AS479 Pivot Pin - Anti-Spin Parachute Jettison Slip 2 1 I 18.00
AS480 Distance Piece - Anti-Spin Parachute Jettison Slip 3 1 I 18.00
AS481 Spring - Anti-Spin Parachute Jettison Slip 2 1 I 18.00
AS482 Balance Weight - Anti-Spin Parachute Jettison Slip 2 1 I 18.00
AS483 Shear Bushes - Parallel 2 1 I 18.00
AS484 Shear Bushes - Taper 5 1 I 18.00
AS485 Pressed End for Clips - to suit 2 B.A. Bolts 5 1 A 18.00
AS486 Clips, 360, with Pressed Ends (M.S.) 7 1 A 18.00
AS487 Clips, 180, with Pressed Ends (M.S.) 6 1 A 18.00
AS488 Clips, Saddle, with Pressed Ends (M.S.) 6 1 A 18.00
AS489 Clips, Saddle, with Pressed Ends (Aluminium Alloy) 4 1 A 18.00
AS490 Clips, 180, with Pressed Ends (Aluminium Alloy) 3 1 I 18.00
AS491 Clips, Aluminium, Wide 4 1 A 18.00
AS492 Clips, Aluminium, Wide 5 1 A 18.00
AS493 Clips, Aluminium, Wide 5 1 A 18.00
AS494 Assembly of Pull Control 4 1 I 18.00
AS495 Rod for Pull Control 3 1 I 18.00
AS496 Knob for Pull Control 4 1 I 18.00
AS497 Sleeve for Pull Control 2 1 I 18.00
AS498 Inscriptions for Pull Control Knob (AS496) 4 1 I 18.00
AS499 Oil Drain Valve Assembly 5 1 I 18.00
AS500-549 Labels 7 1 I 18.00
AS600-649 Labels 4 1 I 18.00
AS650-699 Labels 9 1 I 18.00
AS750-799 Labels 7 1 I 18.00
AS852 Housing, Control Column 11 1 I 18.00
AS855 Rear Ball Race Spigot - Control Column 7 2 I 30.00

23
Reference Title Edition Pages Status Price

AS856 Front Ball Race Spigot - Control Column 7 2 I 30.00


AS860 Combined Dust Washer & Bush - Control Column 6 1 I 18.00
AS861 Dust Washer - Control Column 4 1 I 18.00
AS862 Distance Piece - Control Column 7 1 I 18.00
AS866 Cover for Control Column Housing 4 1 I 18.00
AS867 Ball Race & Housing - Control Column 3 1 A 18.00
AS868 Forging for Ball Race Housing - Control Column 4 2 A 30.00
AS869 Control Column 4 1 A 18.00
AS870 Trim Control Assembly, 90 Drive 13 1 I 18.00
AS872 Spacer - Trim Control 3 1 A 18.00
AS873 Body - Trim Control 4 1 A 18.00
AS874 Housing - Trim Control 8 1 A 18.00
AS875 Pinnion & Boss - Trim Control 5 1 A 18.00
AS876 Forging for Housing - Trim Control 5 1 A 18.00
AS877 Zero Marker - Trim Control 4 1 A 18.00
AS878 Trim Control - Assembly D. Drive 9 1 I 18.00
AS879 Distance Tube, Trim Control 3 1 A 18.00
AS881 Intermediate Gear - Trim Control 7 1 I 18.00
AS882 Pin - Trim Control 3 1 A 18.00
AS883 Sprocket - Trim Control 5 1 A 18.00
AS884 Chain Guard - Trim Control 2 1 A 18.00
AS885 Housing - Trim Control 7 1 A 18.00
AS886 Disc - Trim Control 3 1 A 18.00
AS887 Boss for Handwheel - Trim Control 8 1 A 18.00
AS888 Bevel & Shaft (Sprocket) - Trim Control 6 1 A 18.00
AS889 Bevel & Shaft (Handwheel) - Trim Control 7 1 A 18.00
AS891 Dial - Trim Control 6 1 A 18.00
AS892 Washer - Trim Control 5 1 A 18.00
AS893 Spring Ring - Trim Control 3 1 A 18.00
AS897 Gear - Trim Control 4 1 I 18.00
AS898 Bush - Trim Control 5 1 I 18.00
AS900-1142 BS Chains & Fittings Assembly Code 5 1 A 18.00
AS1151 Pulley, (Ball Bearing) Shrouded, Single 5 1 I 18.00
AS1152 Pulley, (Ball Bearing) Shrouded, Twin 5 1 I 18.00
AS1153 Pulley, (Ball Bearing) Shrouded, Triple 5 1 I 18.00
AS1154 Pulley, (Ball Bearing) Shrouded, Quadruple 5 1 I 18.00
AS1155 First Aid Stowage 2 1 I 18.00
AS1156 Pressed End for Clips, to suit DIA Bolts 4 1 A 18.00
AS1157 Clips, 360, with Pressed Ends (M.S.) 5 1 A 18.00
AS1158 Clips, 180, with Pressed Ends (M.S.) 4 1 A 18.00
AS1159 Clips, Saddle, with Pressed Ends (M.S.) 5 1 A 18.00
AS1160 Clips, Saddle, with Pressed Ends (Aluminium Alloy) 3 1 A 18.00
AS1161 Clips, 180, with Pressed Ends (Aluminium Alloy) 2 1 A 18.00

24
Reference Title Edition Pages Status Price

AS1162 Clips, 360, with Pressed Ends (Aluminium Alloy) 2 1 A 18.00


AS1163 Clips, 360, with Pressed Ends (Aluminium Alloy) 2 1 A 18.00
AS1230 Trim Control Assembly 90 Drive 5 1 A 18.00
AS1231 Trim Control Assembly D. Drive 5 1 A 18.00
AS1232 Intermediate Gear - Trim Control 4 1 A 18.00
AS1233 Gear - Trim Control 2 1 A 18.00
AS1234 Dial Assembly - Trim Control 3 1 A 18.00
AS1235 Dial Assembly - Trim Control 2 1 A 18.00
AS1240 Cover Plate- Trim Control 2 1 A 18.00
AS1241 Shaft - Trim Control - Direct Drive 2 1 A 18.00
AS1242 Bolt, 90 Countersunk Head (H.T.S.) 18 1 I 18.00
AS1243 Bolt, 90 Countersunk Head (Aluminium Alloy) 11 1 I 18.00
AS1244 Bolt, Raised 90 Countersunk Head (H.T.S.) 16 1 I 18.00
AS1245 Bolt, Raised 90 Countersunk Head (Aluminium Alloy) 11 1 I 18.00
AS1246 Bolt, Round Head (H.T.S.) 18 1 I 18.00
AS1247 Bolt, Round Head (Aluminium Alloy) 12 1 I 18.00
AS1248 Bolt, Mushroom Head (H.T.S.) 16 1 I 18.00
AS1249 Bolt, Mushroom Head (Aluminium Alloy) 13 1 I 18.00
AS1251-1266 Fork End (Swaged on Cable) 3 1 I 18.00
AS1267-1282 Eye End (Swaged on Cable) 2 1 I 18.00
AS1283-1298 Screw End, Female (Swaged on Cable) 3 1 I 18.00
AS1299-1314 Adjuster Screw (Swaged on Cable) 4 1 I 18.00
AS1315-1326 Eye End, for Chain (Swaged on Cable) 3 1 I 18.00
AS1327-1328 Connector - 4BA (8mm Chain) 4 1 I 18.00
AS1330-1384 3 CWT Cable & Swaged End Assembly Code 4 1 I 18.00
AS1385-1450 5 CWT Cable & Swaged End Assembly Code 4 1 I 18.00
AS1451-1516 10 CWT Cable & Swaged End Assembly Code 4 1 I 18.00
AS1529-1583 15 CWT Cable & Swaged End Assembly Code 3 1 I 18.00
AS1607-1661 20 CWT Cable & Swaged End Assembly Code 3 1 I 18.00
AS1673-1717 25 CWT Cable & Swaged End Assembly Code 3 1 I 18.00
AS1728-1782 35 CWT Cable & Swaged End Assembly Code 3 1 I 18.00
AS1794-1838 45 CWT Cable & Swaged End Assembly Code 3 1 I 18.00
AS1854-1857 Hinges (Aluminium Alloy Single Flange Plates) 7 1 I 18.00
AS1858-1859 Hinges (Aluminium Alloy Double Flange Plates) 7 1 I 18.00
AS1860 Pulley (Plain Bearing) 5 1 I 18.00
AS1861-1864 Pulley (Plain Bearing) 7 1 I 18.00
AS1865-1867 Distance Piece (Plain Bearing, Cable Pulleys) 3 1 I 18.00
AS1868 Pulley - (B.S.1 Chain, 8mm Pitch) 5 1 I 18.00
AS1869 Pulley - (B.S.2 Chain, Pitch) 5 1 I 18.00
AS1870 Pulley - (B.S.4 Chain, Pitch) 4 1 I 18.00
AS1871 Pulley - (B.S.6 Chain, Pitch) 7 1 I 18.00
AS1872-1875 Distance Piece (Plain Bearing, Chain Pulleys) 2 1 I 18.00
AS1876-1879 Hinges (Aluminium Alloy Single Flange Plates) 12 2 A 30.00

25
Reference Title Edition Pages Status Price

AS1880-1881 Hinges (Aluminium Alloy Double Flange Plates) 14 1 A 18.00


AS1886 3 Unit Signal Cartridge Stowage Assembly 4 1 I 18.00
AS1887 Spring Retaining Plate - Signal Cartridge Stowage 3 1 I 18.00
AS1888 Base 3 Unit Signal Cartridge Stowage 3 1 I 18.00
AS1889 Assembly of Cradle for Oxygen Bottle 3 1 A 18.00
AS1890 Cradle for Oxygen Bottle 3 1 A 18.00
AS1891 Strap for Oxygen Cradle 2 1 A 18.00
AS1892 Trunnion for Strap (2 B.A.) 2 1 A 18.00
AS1893 Strap for Oxygen Cradle 3 1 A 18.00
AS1894 Trunnion for Strap (Plain) 2 1 A 18.00
AS1895 Bolt, Wing - Oxygen Cradle 3 1 A 18.00
AS1896 Shank for Wing Bolt 3 1 A 18.00
AS1897 Draw Pin, Inner - Oxygen Cradle 3 1 A 18.00
AS1898 Draw Pin, Outer - Oxygen Cradle 4 1 A 18.00
AS1899 Spring for Oxygen Cradle 3 1 A 18.00
AS1900 Cable Clips 7 1 I 18.00
AS1901 Cable Clips 8 1 I 18.00
AS1902 Cable Grommets 2 1 I 18.00
AS1903 Saddle Washers (Aluminium Alloy) 4 1 A 18.00
AS1904 Saddle Washers (Aluminium Alloy) 3 1 A 18.00
AS1905 Saddle Washers (Steel) 2 1 A 18.00
AS1906 Saddle Washers (Steel) 2 1 A 18.00
AS1907 Knob (Carburetter Hot/Cold Air Control) 6 1 I 18.00
AS1908 Knob (Throttle Control) 6 1 I 18.00
AS1909 Knob (General Purpose) 6 1 I 18.00
AS1910 Knob (Air Shutter Control) 6 1 I 18.00
AS1911 Knob (Flap Control) 7 1 I 18.00
AS1913 Knob (Undercarriage Control) 6 1 I 18.00
AS1914 Knob (Propeller Control) 6 1 I 18.00
AS1915 Knob (Supercharger Control) 6 1 I 18.00
AS1918 Fuel Drain Valve Assembly 5 1 I 18.00
AS1920 Pipe Clamp Self-Bonding Typical Assembly 6 1 I 18.00
AS1921 Pipe Clamp Block (3/16 DIA) 6 1 I 18.00
7
AS1922 Pipe Clamp Block ( /32 DIA) 6 1 I 18.00
AS1923 Pipe Clamp Block ( DIA) 6 1 I 18.00
AS1924 Pipe Clamp Block (.272 DIA) 6 1 I 18.00
AS1925 Pipe Clamp Block (5/16 DIA) 6 1 I 18.00
AS1926 Bolt Block 6 1 I 18.00
AS1927 Pipe Clamp Stud 5 1 I 18.00
AS1930 Assembly of Access Door 5 1 I 18.00
AS1931 Frame for Access Door 4 1 I 18.00
AS1933 Assembly of Access Door 4 1 I 18.00
AS1934 Frame for Access Door 4 1 I 18.00

26
Reference Title Edition Pages Status Price

AS1963 Washer (or Flush Drain Valve) 5 1 I 18.00


AS1965 Filler Cap 6 1 I 18.00
AS1975 Cover, Inspection - Typical Assembly 4 1 I 18.00
AS1976-1990 Ring, Tapped, Inner 6 1 I 18.00
AS2006-2020 Ring, Bolt 9 1 I 18.00
AS2021-2025 Bolt for Inner Ring 5 1 I 18.00
AS2026-2040 Washer, Joint (Outer) 5 1 I 18.00
AS2041-2055 Washer, Joint (Inner) 5 1 I 18.00
AS2056-2060 Cover, Inspection Door 4 1 I 18.00
AS2063 Assembly of Handle & Torque Shaft, Pilots Seat Raising Gear 6 1 I 18.00
AS2064 Quadrant Lever - Pilots Seat Raising Gear 9 1 I 18.00
AS2068 Lever - Pilots Seat Raising Gear 6 1 I 18.00
AS2070 Handle for Pilots Seat Raising Gear 7 1 I 18.00
AS2071 Forging for Handle Pilots Seat Raising Gear 5 1 I 18.00
AS2073 Bearing Bolt - Pilots Seat Raising Gear 3 1 I 18.00
AS2074 Bearing Insert - Pilots Seat Raising Gear 7 1 I 18.00
AS2075 Plunger Operating Rod - Pilots Seat Raising Gear 7 1 I 18.00
AS2076 Press Button - Pilots Seat Raising Gear 4 1 I 18.00
AS2077 Plunger Spring - Pilots Seat Raising Gear 5 1 I 18.00
AS2078 Washer - Pilots Seat Raising Gear 4 1 I 18.00
AS2080 Shim Washer - Pilots Seat Raising Gear 4 1 I 18.00
AS2081 Distance Bush - Pilots Seat Raising Gear 6 1 I 18.00
AS2082 Thin Castle Nut - Pilots Seat Raising Gear 3 1 I 18.00
AS2083 Handle Grip (Seat Height Adjustment) 4 1 I 18.00
3
AS2084 Tubular Rivet, /16 DIA. (Steel) 5 1 I 18.00
AS2085 Plug End -Pilots Seat Raising Gear 4 1 I 18.00
AS2086 Torque Tube - Pilots Seat Raising Gear 4 1 I 18.00
AS2087 Top Link- Pilots Seat Raising Gear 5 1 I 18.00
AS2089 Main Bearing Bracket - Pilots Seat Raising Gear 4 1 I 18.00
AS2091 Assembly of Main Bearing Bracket - Pilots Seat Raising Gear 4 1 I 18.00
AS2092 Assister Unit - Pilots Seat Raising Gear 6 1 I 18.00
AS2093 Assister Unit Attachment Link - Pilots Seat Raising Gear 4 1 I 18.00
AS2097 Tubular Rivet - Pilots Seat Raising Gear 5 1 I 18.00
AS2098 Bush for main Bearing Bracket - Pilots Seat Raising Gear 3 1 I 18.00
AS2099 Washer - Pilots Seat Raising Gear 4 1 I 18.00
AS2100 Top Link Attachment Bracket - Pilots Seat Raising Gear 6 1 I 18.00
AS2102 Assister Unit Bobbin - Pilots Seat Raising Gear 3 1 I 18.00
AS2104 Spring Clip - Pilots Seat Raising Gear 4 1 I 18.00
AS2105 Assembly of Handle 4 1 I 18.00
AS2106 Plunger and Spring Housing - Pilots Seat Raising Gear 5 1 I 18.00
AS2107 Quadrant Assembly - Pilots Seat Raising Gear 6 1 I 18.00
AS2108 Quadrant (Machining) - Pilots Seat Raising Gear 8 1 I 18.00
AS2110 Quadrant Stop - Pilots Seat Raising Gear 3 1 I 18.00

27
Reference Title Edition Pages Status Price

AS2111 Attachment Lug for Z Type Harness 1 1 A 18.00


AS2112 Stop Collar, Pilots Seat-Raising Gear 1 1 A 18.00
AS2113 Nut, Slotted 1 1 A 18.00
AS2114 Washer, Taper 1 1 A 18.00
AS2124 Stop Collar (for Pilots Seat) 6 1 I 18.00
AS2125 Upholstery for Pilots Seat - 25g 7 1 I 18.00
AS2128 Plunger - Pilots Seat-Raising Gear 4 1 I 18.00
AS2130 Crew Seat, 25g 8 1 I 18.00
AS2140 Assembly of Pilots Seat-Raising Gear, 25g 5 1 I 18.00
AS2141 Assembly of Pilots Seat, 25g 7 1 I 18.00
AS2142 Pilots Seat Bare, 25g 4 1 I 18.00
AS2143-2144 Harness Attachment Plate, 25g Seat 4 1 I 18.00
AS2145 Stop Collar 5 1 I 18.00
AS2160-2162 Hand Nut 3 1 I 18.00
AS2163-2164 Hand Nut 4 1 I 18.00
AS2170 Assembly of Rudder Bar (Single Position Pedal) 13 1 I 18.00
AS2171 Assembly of Rudder Bar (Two-Position Pedal) 13 1 I 18.00
AS2174 Screwed, rudder bar 7 1 I 18.00
AS2175 Cap for Adjusting Worm (Rudder Bar) 7 1 I 18.00
AS2176 Stamping for Cap (Rudder Bar) 4 1 I 18.00
AS2177 Adjusting Wheel (Rudder Bar) 9 1 I 18.00
AS2178 Collar for Adjusting Worm (Rudder Bar) 6 1 I 18.00
AS2179 Plate for Adjusting Wheel (Rudder Bar) 6 1 I 18.00
AS2180 Bush (Rudder Bar) 6 1 I 18.00
AS2181 Packing Shim (Rudder Bar) 4 1 I 18.00
AS2182 Fork End for Bar Arm (Rudder Bar) 9 2 I 30.00
AS2183 Assembly of Rudder Bar Arm 8 1 I 18.00
AS2184 Pedal Pivot (Rudder Bar) 5 1 I 18.00
AS2185 Stamping for Pedal Pivot (Rudder Bar) 4 1 I 18.00
AS2186 Tube for Rudder Bar Arm 6 1 I 18.00
AS2187 Eye Bolt (Rudder Bar) 5 1 I 18.00
AS2188 Spindle for Rudder Bar 12 1 I 18.00
AS2189 Support, Rudder Bar 6 1 I 18.00
AS2190 Support Plate Stamping (Rudder Bar) 3 1 I 18.00
AS2191 Rudder Bar Pedestal (Upper) 5 1 I 18.00
AS2192 Casting for Rudder Bar Pedestal (Upper) 6 1 I 18.00
AS2193 Rudder Bar Pedestal (Lower) 5 1 I 18.00
AS2194 Casting for Rudder Bar Pedestal (Lower) 5 1 I 18.00
AS2195 Link for Rudder Bar 4 1 I 18.00
AS2196 Special Bolt (Rudder Bar) 6 1 I 18.00
AS2197 Special Nut (Rudder Bar) 5 1 I 18.00
AS2198-2199 Assembly of Foot Pedal (Rudder Bar) 4 1 I 18.00
AS2200-2201 Sub-Assembly of Two-Position Pedal (Rudder Bar) 5 1 I 18.00

28
Reference Title Edition Pages Status Price

AS2202-2203 Pivot Bolts (Rudder Bar) 5 1 I 18.00


AS2204 Plug End for Link Bar 4 1 I 18.00
AS2205 Plug End for Link Bar (Rudder Bar) 4 1 I 18.00
AS2206 Detail Assembly of Link Bar (Rudder Bar) 6 1 I 18.00
AS2207 Bush for Link Bar (Rudder Bar) 5 1 I 18.00
AS2208-2209 Pedal Pivot Bolt (Rudder Bar) 5 1 I 18.00
AS2210 Distance Piece (Rudder Bar) 5 1 I 18.00
AS2211 Bush for Pedal Pivot (Rudder Bar) 5 1 I 18.00
AS2212 Casting or Stamping of Pedal (Rudder Bar) 5 1 I 18.00
AS2213 Pedal for Rudder Bar 7 1 I 18.00
AS2214 Casting or Stamping of Pedal (Rudder Bar) 5 1 I 18.00
AS2215 Pedal for Rudder Bar 7 1 I 18.00
AS2216 Casting for Pedal Bracket (Rudder Bar) 5 1 I 18.00
AS2217-2218 Bracket for Two-Position Pedal (Rudder Bar) 7 1 I 18.00
AS2219 Foot Plate (Rudder Bar) 7 1 I 18.00
AS2220 Stirrup (Rudder Bar) 5 1 I 18.00
AS2221 Pedal Spool (Rudder Bar) 4 1 I 18.00
AS2222 Bush for Pedal Spool (Rudder Bar) 3 1 I 18.00
AS2223 Shaft for Pedal Spool (Rudder Bar) 3 1 I 18.00
AS2224 Cap Nut (Rudder Bar) 4 1 I 18.00
AS2225 Adjusting Worm (Rudder Bar) 10 1 I 18.00
AS2226 Bush - (Rudder Bar) 8 1 I 18.00
AS2227 Rivet, Snap Head 9 1 I 18.00
AS2228 Rivet, Mushroom Head 9 1 I 18.00
AS2229 Rivet, Countersunk 90 9 1 I 18.00
AS2230 Rivet, Countersunk 120 9 1 I 18.00
AS2231 Link for Rudder Bar 8 2 I 30.00
AS2232 Drum Stop Rivet 3 1 I 18.00
AS2239 Sleeve for Control Column Tube 5 1 I 18.00
AS2242 Tab Washer 4 1 I 18.00
AS2244 Control Handwheel ( Full Type) 3 1 I 18.00
AS2246 Assembly of Control Handwheel ( Full Type) 2 1 I 18.00
AS2247 End Piece for Pilots Control Wheel ( Type) 3 1 I 18.00
AS2249 4 Unit Signal Cartridge Stowage Assembly 4 1 I 18.00
AS2250 Base - 4 Unit Signal Cartridge Stowage 3 1 I 18.00
AS2251 Spring Retaining Plate, Signal Cartridge Stowage 3 1 I 18.00
AS2252 Spring Clip - Signal Cartridge Stowage 3 1 I 18.00
AS2254 Control Column Assembly 9 1 I 18.00
AS2255 Control Column Tube 8 1 I 18.00
AS2256 Bottom Plug End - Control Column 5 1 I 18.00
AS2257 Top Plug End for Control Column Tube 4 1 I 18.00
AS2260 Sleeve for Adjustable Stops - Control Column 3 1 I 18.00
AS2261 Adjustable Stop, Control Column 8 1 I 18.00

29
Reference Title Edition Pages Status Price

AS2264 Trunnion for Harness Release Gear 4 1 A 18.00


AS2268 Spacer Tube 3 1 A 18.00
AS2269 Control Lever 3 1 A 18.00
AS2270 Spring - Control Lever 3 1 A 18.00
AS2271 Piston - Control Lever 3 1 A 18.00
AS2272 Lever 2 1 A 18.00
AS2273-2274 Body - Control Lever 3 1 A 18.00
AS2275 Stop Socket - Control Lever 3 1 A 18.00
AS2288 Drum Stop 3 1 A 18.00
AS2289 Location Spool 4 1 A 18.00
AS2292 Bolt DIA. Control Column 6 1 I 18.00
5
AS2293 Bolt /16 DIA. Control Column 6 1 I 18.00
AS2294 Spring Clips 8 1 A 18.00
AS2295 Spring Clips 4 1 A 18.00
AS2296 Spring Clip 1 1 A 18.00
AS2297-2299 Distance Tubes - Steel 3 1 I 18.00
AS2300-2303 Distance Tubes - Steel 3 1 I 18.00
AS2304-2306 Distance Tubes, Aluminium Alloy 3 1 I 18.00
AS2307-2310 Distance Tubes, Aluminium Alloy 3 1 I 18.00
AS2311 Rotating Knob 3 1 I 18.00
AS2312 Screw for Rotating Knob 3 1 I 18.00
AS2313 Rotating Knob 3 1 I 18.00
AS2314 Screw for Rotating Knob 2 1 A 18.00
AS2315 Assembly of 1 Oil Drain Valve 2 1 I 18.00
AS2316 Body for 1 Oil Drain Valve 2 1 I 18.00
AS2317 Stamping for Valve Body (Oil Drain Valve) 3 1 I 18.00
AS2318 Plug for 1 Oil Drain Valve 2 1 I 18.00
AS2320-2343 Stock Plate Sprockets (Aluminium Alloy) 2 1 I 18.00
AS2344-2367 Stop Plate Sprockets (Steel) 2 1 A 18.00
AS2368 Cover for Access Door, Circular Type (Moulded) 3 1 I 18.00
AS2369 Cover for Access Door, Rectangular Type (Moulded) 4 1 I 18.00
AS2370 Copper Bonding Lead 3 1 I 18.00
AS2371 Bush, Knurled 2 1 I 18.00
AS2372 Tank Strap Assembly, B.S.F. 2 1 A 18.00
5
AS2373 Tank Strap Assembly, /16 B.S.F. 2 1 A 18.00
AS2374 Tank Strap Assembly, B.S.F. 2 1 A 18.00
AS2375 Tank Strap ( B.S.F.) 2 1 A 18.00
5
AS2376 Tank Strap ( /16 B.S.F.) 2 1 A 18.00
AS2377 Tank Strap ( B.S.F.) 2 1 A 18.00
AS2378 Tank Strap End ( B.S.F.) 2 1 A 18.00
AS2379 Tank Strap End (5/16 B.S.F.) 2 1 A 18.00
AS2380 Tank Strap End ( B.S.F.) 2 1 A 18.00
AS2381-2383 Tension Rod 3 1 A 18.00

30
Reference Title Edition Pages Status Price

AS2384-2392 Trunnion 2 1 A 18.00


AS2393-2395 Collar 2 1 A 18.00
AS2396 Cap, Filler Cap, 2" 6 1 I 18.00
AS2397 Cap, Filler Cap, 3" 6 1 I 18.00
AS2398 Filler Cap Assembly 5 1 A 18.00
AS2399 Seating (Filler Cap) 7 2 A 30.00
AS2400 Filler Cap 5 2 A 30.00
AS2402 Arm (Filler Cap) 6 2 A 30.00
AS2403 Pivot Bracket (Filler Cap) 6 1 A 18.00
AS2404 Washer (Filler Cap) 4 1 A 18.00
AS2405 Washer-Seating (Filler Cap) 4 1 A 18.00
AS2406 Pivot Screw (Filler Cap) 3 1 A 18.00
AS2407 Screw (Filler Cap) 3 1 A 18.00
AS2408 Captive Nut (Filler Cap) 4 1 A 18.00
AS2409 Knob (Filler Cap) 7 1 A 18.00
AS2410 Retaining Plate (Filler Cap) 4 1 A 18.00
AS2411 Adjusting Worm (Rudder Bar) 8 1 A 18.00
AS2412 Screwed Sleeve (Rudder Bar) 4 1 A 18.00
AS2414-2418 Stud - Alternative to Bolt for Inner Ring 3 1 A 18.00
AS2419 Drain Plug Assembly 5 1 A 18.00
AS2420 Plug - Drain Plug 4 1 A 18.00
AS2421 Seating - Drain Plug 3 1 A 18.00
AS2422 Washer - Drain Plug 3 1 A 18.00
AS2424 Strap 1 Wide 2 1 A 18.00
AS2425 Strap 1 Wide 2 1 A 18.00
AS2426 Clamping Screw - 2BA. Tank Straps 2 1 A 18.00
AS2427-2432 Trunnion - Tank Straps 2 1 A 18.00
AS2434-2438 Quick-Release Pins (Ringed) 10 1 A 18.00
AS2439-2443 Assembly of Quick-Release Pin 6 2 A 30.00
AS2444-2445 Assembly of Quick-Release Pin (Ringed) 13 2 A 30.00
AS2446-2450 Pin (Quick-Release) 3 1 A 18.00
AS2451-2452 Pin (Quick-Release, Ringed) 4 1 A 18.00
AS2453-2457 Retaining Bar for Quick-Release Pin 3 1 A 18.00
AS2458-2459 Retaining Bar for Quick-Release Pin (Ringed) 3 1 A 18.00
AS2460-2466 Springs for Quick-Release Pins 2 1 A 18.00
AS2467 Spring Washer for Quick-Release Pin 4 1 A 18.00
AS2469-2470 Tanks - 1 Gallon (for De-Icing Fluid & Drinking Water) 2 1 A 18.00
AS2471-2472 Tanks - 2 Gallons (for De-Icing Fluid & Drinking Water) 3 1 A 18.00
AS2473-2474 Tanks - 4 Gallons (for De-Icing Fluid & Drinking Water) 3 1 A 18.00
AS2475-2476 Tanks - 6 Gallons (for De-Icing Fluid & Drinking Water) 3 1 A 18.00
AS2477-2478 Tanks - 7 Gallons (for De-Icing Fluid & Drinking Water) 3 1 A 18.00
AS2479-2480 Tanks - 8 Gallons (for De-Icing Fluid & Drinking Water) 3 1 A 18.00
AS2481 Filler Neck 2 1 A 18.00

31
Reference Title Edition Pages Status Price

AS2482 Outlet Adaptor 2 1 A 18.00


AS2483 Insert for Outlet Adaptor 2 1 A 18.00
AS2484-2489 Label for De-Icing Fluid Tanks 2 1 A 18.00
AS2490-2495 Label for Drinking Water Tanks 2 1 A 18.00
AS2504 Bolts, Hexagon, Close Tolerance 10 1 A 18.00
AS2505 Stud for Cable Fastening 3 1 A 18.00
AS2506 Flexible Strip for Cable Fastening 4 1 A 18.00
AS2507 Bridge Piece 1 1 A 18.00
AS2508 Strap for Cable Fastening 3 1 A 18.00
AS2509 Stud for Cable Fastening 4 1 A 18.00
AS2510 Filler Cap Assembly (2 DIA.) 5 1 A 18.00
AS2511 Filler Cap 2 1 A 18.00
AS2512 Stamping for Arm (Filler Cap) 3 2 A 30.00
AS2513 Seating for Filler Cap 4 2 A 30.00
AS2514 Insert for Seating (Filler Cap) 3 1 A 18.00
AS2515 Retaining Plate 3 1 A 18.00
AS2516 Sealing Washer 3 1 A 18.00
AS2517 Washer for 2 Filler Cap 2 1 A 18.00
AS2519 Inner Handle 6 1 A 18.00
AS2520 Outer Handle 5 1 A 18.00
AS2523 Spider Assembly R.H. 5 1 A 18.00
AS2524 Spider Assembly L.H. 5 1 A 18.00
AS2525 Top Cover 4 1 A 18.00
AS2527 Cover Plate Assembly 3 1 A 18.00
AS2528 Push Button - Outer 4 1 A 18.00
AS2529 Push Button - Inner 4 1 A 18.00
AS2530 Centre Plate - Push Button 4 1 A 18.00
AS2531 Sleeve - Push Button 5 1 A 18.00
AS2532 Catch Plate 4 1 A 18.00
AS2533 Button for Catch 3 1 A 18.00
AS2534 Spring for Catch 3 1 A 18.00
AS2535 Long Bolt Rod 5 1 A 18.00
AS2536 Short Bolt Rod 5 1 A 18.00
AS2540 Blanking Plug 3 1 A 18.00
AS2541 Main Spring 4 1 A 18.00
AS2542 Main Body. Left Hand 5 1 A 18.00
AS2543 Main Body. Right Hand 5 1 A 18.00
AS2544 Spindle - Double Handle Lock 5 1 A 18.00
AS2545 Internal Sleeve - Main Spindle 4 1 A 18.00
AS2547 Sleeve for Operating Spindle 7 1 A 18.00
AS2548 Spindle Assembly, Double Handle Lock 5 1 A 18.00
AS2549 Outer Handle Assembly, Double Handle Lock 5 1 A 18.00
AS2550 Spindle - Single Handle Lock 5 1 A 18.00

32
Reference Title Edition Pages Status Price

AS2551 Spindle Assembly - Single Handle Lock 5 1 A 18.00


AS2552 Outer Handle Assembly. Single Handle Lock 5 1 A 18.00
AS2553 Lock Plunger 5 1 A 18.00
AS2554 Special Mushroom Head Screw 2 1 A 18.00
AS2555 Chamfered Washer 3 1 A 18.00
AS2556 Spring Stud 4 1 A 18.00
AS2557 Spring Clip 3 1 A 18.00
AS2558 Seal - Press Button 3 1 A 18.00
AS2559 Seal - Handle 3 1 A 18.00
AS2560 Drain Valve Assembly - 2 5 1 A 18.00
AS2562 Drain Valve Guide 4 1 A 18.00
AS2563 Bush for Valve Guide 2 1 A 18.00
AS2564 Drain Valve - Body 5 2 A 30.00
AS2565 Screw Cap 5 1 A 18.00
AS2567 Washer, Joint (Drain Valve) 3 1 A 18.00
AS2568 Jointing Washer (Nut) 2 1 A 18.00
AS2569 Seating Ring 4 1 A 18.00
AS2570 Chain Tag 3 1 A 18.00
AS2571 Spring Ring 3 1 A 18.00
AS2572 Cap Assembly (Drain Valve) 3 1 A 18.00
AS2573 Drain Valve Assembly - 1 6 1 A 18.00
AS2574 Drain Valve - Body 5 2 A 30.00
AS2575 Screw Cap 4 1 A 18.00
AS2576 Jointing Washer (Screw Cap) 4 1 A 18.00
AS2577 Spring Ring 3 1 A 18.00
AS2578 Seating Ring 5 1 A 18.00
AS2579 Valve Casting 5 2 A 30.00
AS2580 Tank Drainage Connection Drain Valve 2 5 1 A 18.00
AS2581 Union Nut - Casting 6 2 A 30.00
AS2582 Valve Lifter 3 1 A 18.00
AS2583 Assembly of Valve Lifter and Adaptor (called for on AS2580) 5 1 A 18.00
AS2584 Tank Drainage Connection - Drain Valve, 1 5 1 A 18.00
AS2585 Union Nut - Casting 6 2 A 30.00
AS2586 Valve Lifter 3 1 A 18.00
AS2587 Assembly of Valve Lifter and Adaptor (called for on AS2584) 5 1 A 18.00
AS2588 Cap Assembly 3 1 A 18.00
AS2589 Stowage - De-Oiling Connection 2 1 I 18.00
AS2590 Assembly of Filler Cap (Flush) 7 1 I 18.00
AS2591 Filler Cap Base 4 1 A 18.00
AS2592 Filler Cap (Sub-Assembly) 8 1 A 18.00
AS2593 Filler Cap 5 1 A 18.00
AS2594 Filler Cap. Locking Lever 7 1 A 18.00
AS2595 Filler Cap Lever 7 1 I 18.00

33
Reference Title Edition Pages Status Price

AS2598 Filler Sealing Ring 5 1 I 18.00


AS2599 Seal - Lock Plunger 3 1 A 18.00
AS2800 Tapped Ring for Drain Valve (AS 2560) 3 2 A 30.00
AS2801 Tapped Ring for Drain Valve (AS 2573) 3 2 A 30.00
AS2802 Spring Anchorage 1 1 A 18.00
AS2803 Washer Plate for Tapped Nut Ring (AS 2800) 1 1 A 18.00
AS2804 Washer Plate for Tapped Nut Ring (AS 2801) 1 1 A 18.00
AS2805 De-Oiling Connection. Naval Aircraft 1 1 A 18.00
AS2806-2808 Seamless Distance Tubes 6 1 A 18.00
AS2809-2811 Seamless Distance Tubes 5 1 A 18.00
AS2812 Retaining Cable (Filler Cap) 3 1 I 18.00
AS2813 Cable Clip (Filler Cap) 2 1 A 18.00
AS2814 Cable Spring for Harness Release Gear 4 1 A 18.00
AS2815 Cable Spring for Harness Release Gear 1 1 A 18.00
AS2816 Drum Spring 3 1 A 18.00
AS2817 Catch Spring for Harness Release Gear 4 1 A 18.00
AS2818 Cable Assembly 4 1 A 18.00
AS2819 Half Casing for Harness Release Gear 4 1 A 18.00
AS2820 Assembly of Front Casing (Harness Release Gear) 4 1 A 18.00
AS2821 Assembly of Back Casing (Harness Release Gear) 5 1 A 18.00
AS2822 Spring Anchorage 3 1 A 18.00
AS2823 Fairlead 3 1 A 18.00
AS2824 Drum Assembly 6 1 A 18.00
AS2825 Drum 6 1 A 18.00
AS2826 End for Cable 3 1 A 18.00
AS2827 Distance Guard Plate 3 1 A 18.00
AS2829 Catch for Harness Release Gear 4 1 A 18.00
AS2830 25g Harness Release Gear (Locking In) 5 1 A 18.00
AS2831 Assembly of Bowden Control 4 1 A 18.00
AS2832 Link Plate (for Q and QK Harness) 2 1 I 18.00
AS2833 Distance Tube (for QL Harness) 2 1 I 18.00
AS2834 Assembly of Rudder-Bar (Single Position Pedal) 5 1 A 18.00
AS2835 Assembly of Rudder-Bar (Two Position Pedal) 5 1 A 18.00
AS2839 Collar, Retaining Cable (Filler Cap) 3 1 I 18.00
AS2840-2899 Assembly of Flush Fitting Door Lock 6 2 A 30.00
AS2900 Eye End 2 1 A 18.00
AS2902-2903 Ball End 3 1 A 18.00
AS2904-2905 Ball End 3 1 A 18.00
AS2906-2909 Turnbuckles 3 1 I 18.00
AS2910 Valve Seal, for Flush Drain Valve 2 1 A 18.00
AS2911 Seal 2 1 A 18.00
AS2912 Seal 2 1 A 18.00
AS2913 Seal 2 1 A 18.00

34
Reference Title Edition Pages Status Price

AS2914 Seal 2 1 A 18.00


AS2915 Seal 2 1 A 18.00
AS2916 Plate, Serial Record 3 1 A 18.00
AS2917 Plate, Modification Record 3 1 A 18.00
AS2918 Close Tolerance Rivet (90 Countersunk Head) 3 1 A 18.00
AS2919 Close Tolerance Rivet (120 Countersunk Head) 4 1 A 18.00
AS2920 Bolt, 90 Countersunk Head (Stainless Steel) 6 1 A 18.00
AS2921 Bolt, Raised 90 Countersunk Head (Stainless Steel) 6 1 A 18.00
AS2922 Bolt, Round Head (Stainless Steel) 6 1 A 18.00
AS2923 Bolt, Mushroom Head (Stainless Steel) 6 1 A 18.00
AS2924 Bolt, Mild Steel. - Phillips Round Head 2 1 I 18.00
AS2925 Bolt, Mild Steel. - Phillips Mushroom Head 2 1 I 18.00
AS2926 Bolt, Mild Steel. - Phillips 90 Countersunk Head 2 1 I 18.00
AS2927 Bolt, Mild Steel. - Phillips Raised 90 Countersunk Head 2 1 I 18.00
AS2928 Bolt, Mild Steel. - Phillips Raised 120 Countersunk Head 2 1 I 18.00
AS2929 Bolt, Mild Steel. - Phillips 120 Countersunk Head 2 1 I 18.00
AS2936 Assembly of Stowage - Signal Lamp (Horizontal Base) 2 1 I 18.00
AS2938 Base Plate - Stowage, Signal Lamp 2 1 I 18.00
AS2939 Stowage - Signal Lamp (Vertical Base) 2 1 I 18.00
AS2940 Support - Stowage (Vertical) Signal Lamp 2 1 I 18.00
AS2941 Blanking Cap for 1 Fuel Coupling 2 1 A 18.00
AS2942 Bolt, for Blanking Cap 3 1 A 18.00
AS2943 Locking Spring, for Blanking Cap 3 1 A 18.00
AS2944 Chain Assembly, for Blanking Cap 2 1 A 18.00
AS2945 Sealing Cap 3 1 A 18.00
AS2946 Blanking Cap for 2 Fuel Coupling 2 1 A 18.00
AS2947 Locking Spring (for Blanking Cap) 3 1 A 18.00
AS2948 Sealing Cap 3 1 A 18.00
AS2949 Chain Assembly (for Blanking Cap) 2 1 A 18.00
AS2950 Spindle for Brake Lock 2 1 A 18.00
AS2951 Lock Washer. Brake Lock Adjustment 2 1 A 18.00
AS2952 G.A. Flanged Half for 1 Fuelling Coupling (non-self Sealing 8 1 A 18.00
Type)
AS2953 G.A. Flanged Half for 1 Re-Fuelling Coupling (Self Sealing 8 1 A 18.00
Type)
AS2954 Flanged Adaptor - Forging 6 2 A 30.00
AS2955 Valve Retainer 3 1 A 18.00
AS2956 Seal Retainer 4 1 A 18.00
AS2958 Valve (for re-fuelling Coupling) 4 1 A 18.00
AS2959 Spring (for re-fuelling Coupling) 5 1 A 18.00
AS2961 Tab 3 1 A 18.00
AS2969 G.A. Flanged Half for 2 Re-Fuelling Coupling (Open Ended 5 1 A 18.00
Type)
AS2970 G.A. Flanged Half for 2 Re-Fuelling Coupling (Self Sealing 6 2 A 30.00
Type)

35
Reference Title Edition Pages Status Price

AS2973 Locking Flange 2 1 A 18.00


AS2976 Chain Rivet 4 1 A 18.00
AS2977 Bracket 3 1 A 18.00
AS2978 Flanged Adaptor - Forging 5 2 A 30.00
AS2979 Valve (for re-fuelling Coupling) 3 1 A 18.00
AS2980 Spring (for re-fuelling Coupling) 3 1 A 18.00
AS2981 Seal Retainer 3 1 A 18.00
AS2982 Valve Retainer 2 1 A 18.00
AS2985 Locking Flange 2 1 A 18.00
AS2989 Locking Screw Die Casting 3 2 A 30.00
AS2991 Screw - Phillips' Round Head 4 1 A 18.00
AS2992 Screw - Phillips' Mushroom Head 4 1 A 18.00
AS2993 Screw - Phillips' 90 Countersunk Head 4 1 A 18.00
AS2994 Screw - Phillips' Raised 90 Countersunk Head 3 1 A 18.00
AS2995 Screw - Phillips' Raised 120 Countersunk Head 3 1 A 18.00
AS2996 Screw - Phillips' 120 Countersunk Head 3 1 A 18.00
AS3003 Ring Nut - 0.625 DIA. 2 1 A 18.00
AS3004 Ring Nut - 0.750 DIA. 2 1 A 18.00
AS3005 Ring Nut - 0.875 DIA. 2 1 A 18.00
AS3006 Ring Nut - 1.000 DIA. 2 1 A 18.00
AS3007 Ring Nut - 1.125 DIA. 2 1 A 18.00
AS3008 Ring Nut - 1.250 DIA. 2 1 A 18.00
AS3009 Ring Nut - 1.375 DIA. 2 1 A 18.00
AS3010 Ring Nut - 1.500 DIA. 3 1 A 18.00
AS3011 Ring Nut - 1.625 DIA. 2 1 A 18.00
AS3012 Ring Nut - 1.750 DIA. 2 1 A 18.00
AS3013 Ring Nut - 1.875 DIA. 2 1 A 18.00
AS3014 Ring Nut - 2.000 DIA. 2 1 A 18.00
AS3015 Ring Nut - 2.125 DIA. 2 1 A 18.00
AS3016 Ring Nut - 2.250 DIA. 2 1 A 18.00
AS3017 Ring Nut - 2.375 DIA. 2 1 A 18.00
AS3018 Ring Nut - 2.500 DIA. 2 1 A 18.00
AS3019 Ring Nut - 2.625 DIA. 2 1 A 18.00
AS3020 Ring Nut - 2.750 DIA. 2 1 A 18.00
AS3021 Ring Nut - 2.875 DIA. 2 1 A 18.00
AS3022 Ring Nut - 3.000 DIA. 2 1 A 18.00
AS3023 Ring Nut - 3.125 DIA. 2 1 A 18.00
AS3024 Ring Nut - 3.250 DIA. 2 1 A 18.00
AS3025 Ring Nut - 3.375 DIA. 2 1 A 18.00
AS3026 Ring Nut - 3.500 DIA. 2 1 A 18.00
AS3027 Ring Nut - 3.625 DIA. 2 1 A 18.00
AS3028 Ring Nut - 3.750 DIA. 2 1 A 18.00
AS3029 Ring Nut - 3.875 DIA. 2 1 A 18.00

36
Reference Title Edition Pages Status Price

AS3030 Ring Nut - 4.000 DIA. 2 1 A 18.00


AS3031-3036 Packing Washer (Flush Filler Cap) 1 1 A 18.00
AS3037 Axis Pin for Catch (Flush Filler Cap) 4 1 A 18.00
AS3038-3047 Pilot's Control Wheel Assemblys 1 1 A 18.00
AS3048 Pilot's Control Wheel Brake Assembly (Spade Type) 1 1 A 18.00
AS3049 Pilot's Control Wheel Brake Assembly (Horn Type) 1 1 A 18.00
AS3050 Pilot's Control Wheel 1 1 A 18.00
AS3051 Assembly, Push Button Cover 1 1 A 18.00
AS3052 Brake Lock Lever for Pilots Control Wheel 2 1 A 18.00
AS3053 Brake Lock Shaft for Pilots Control Wheel 1 1 A 18.00
AS3054 Brake Lock Spring for Pilots Control Wheel 2 1 A 18.00
AS3055 End Piece for Pilots Control Wheel 2 1 I 18.00
AS3056 Switch Assembly for Pilots Control Wheel 3 1 I 18.00
AS3057 Switch Assembly - Pilots Control Wheel 3 1 I 18.00
AS3058 Switch Assembly for Pilots Control Wheel 1 1 A 18.00
AS3059 Switch Assembly for Pilots Control Wheel 1 1 A 18.00
AS3060 Switch Assembly for Pilots Control Wheel 1 1 A 18.00
AS3061 Switch Assembly for Pilots Control Wheel 1 1 A 18.00
AS3062 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS3063 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS3064 Switch Cover - Pilots Control Wheel 3 1 I 18.00
AS3065 Switch Plate - Pilots Control Wheel 3 1 I 18.00
AS3066 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS3067 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS3068 Insert for Press Button - Pilots Control Wheel 1 1 A 18.00
AS3069 Press Button - Pilots Control Wheel 3 1 I 18.00
AS3070 Switch Contact Screw for Pilots Control Wheel 1 1 A 18.00
AS3071 Switch Spring for Pilots Control Wheel 3 1 A 18.00
AS3073 Bonding Lead 4BA & 2BA 2 1 I 18.00
AS3074 Bonding Lead 2 1 I 18.00
AS3075 Bonding Lead 4BA & 2BA - 1/4 2 1 I 18.00
AS3076 Bonding Lug 2BA or 4BA 2 1 I 18.00
AS3077 Bonding Lug - 2 1 I 18.00
AS3078 Bolt - Phillips Round Head 4 1 I 18.00
AS3079 Bolt - Phillips Mushroom Head 4 1 I 18.00
AS3104-3105 Assembly of Cap & Dip Stick 1 1 A 18.00
AS3107-3110 Filler Cap - Small, Plastic 2 1 I 18.00
AS3111 Dip Stick 2 1 I 18.00
AS3112 Sealing Washer 1 1 A 18.00
AS3113 Driwik Silent Static Discharger 1 1 A 18.00
AS3114 Channel, Earthing Point, 19 AMP 1 1 A 18.00
AS3115 Channel, Earthing Point, 37 AMP 1 1 A 18.00
AS3116 Earthing Plate (for D.A. Nut 4 or 2 B.A.) 1 1 A 18.00

37
Reference Title Edition Pages Status Price

AS3117 Spring 4 1 I 18.00


AS3118 Valve - Casting 4 2 A 30.00
AS3119 Shear Bushes - Parallel 2 1 A 18.00
AS3121 Bearing Bush for Pilots Control Wheel 2 1 A 18.00
AS3122 Brake Lock Adjuster for Pilots Control Wheel 1 1 A 18.00
AS3123 Brake Lever for Pilots Control Wheel 3 1 A 18.00
AS3124 Brake Lever for Pilots Control Wheel 3 1 A 18.00
AS3125 Brake Lever for Pilots Control Wheel 2 1 A 18.00
AS3126 Brake Push Rod End for Pilots Control Wheel 4 1 A 18.00
AS3127-3128 Adjusting Brake Screw Stop 1 1 A 18.00
AS3129 Brake off Stop. Pilots Control Wheel 2 1 A 18.00
AS3130 Brake on Stop. Pilots Control Wheel 2 1 A 18.00
AS3131 Locking Ring for Brake Stop. Pilots Control Wheel 1 1 A 18.00
AS3132 Locking Plate - Switch Lever 2 1 A 18.00
AS3133 Spring Cover - Pilots Control Wheel Switch 2 1 A 18.00
AS3134 Spring for Switch Cover 2 1 A 18.00
AS3135 Switch Body Pilots Control Wheel 2 1 I 18.00
AS3136 Switch Body Pilots Control Wheel 2 1 I 18.00
AS3137-3138 Main Switch Body - Pilots Control Wheel 3 1 I 18.00
AS3139 Switch Body - Auto Pilot Switch, Pilots Control Wheel 3 1 I 18.00
AS3140 Switch Body - Auto Pilot Switch, Pilots Control Wheel 3 1 I 18.00
AS3141 Switch Body - Auto Pilot Switch, Pilots Control Wheel 3 1 I 18.00
AS3142 Press Button Auto Pilot Switch, Pilots Control Wheel 3 1 I 18.00
AS3143 Press Button Insert - Auto Pilots Switch - Pilots Control Switch 1 1 A 18.00
AS3144 Spring for Auto Pilot Switch 3 1 A 18.00
AS3145 Switch Spring for Pilots Control Wheel 2 1 A 18.00
AS3146 Switch Lever. Auto Pilot Switch - Pilots Control Wheel 1 1 A 18.00
AS3147 Switch Lever. Auto Pilot Switch - Pilots Control Wheel 1 1 A 18.00
AS3149 Switch Lever Pivot Pilots Control Wheel 1 1 A 18.00
AS3152 Insertion Tube - Switch Body Pilots Control Wheel 2 1 A 18.00
AS3153 Insertion Tube - Switch Body Pilots Control Wheel 2 1 A 18.00
AS3154 Insertion Tube - Switch Body Pilots Control Wheel 2 1 A 18.00
AS3155 Insertion Tube - Switch Body Pilots Control Wheel 2 1 A 18.00
AS3156 Insertion Tube - Switch Body Pilots Control Wheel 2 1 A 18.00
AS3157 Insertion Tube - Switch Body Pilots Control Wheel 2 1 A 18.00
AS3158 Switch Body Assembly Pilots Control Wheel 1 1 A 18.00
AS3159 Connector Tag - Push Button 2 1 A 18.00
AS3160 Connector Tag - Push Button 2 1 A 18.00
AS3161 Stowage Assembly (Horizontal). Signal Lamp 1 1 A 18.00
AS3162 Base Plate 1 1 A 18.00
AS3163 Stowage Assembly (Vertical). Signal Lamp 1 1 A 18.00
AS3164 Support 1 1 A 18.00
AS3165 Pad 2 1 I 18.00

38
Reference Title Edition Pages Status Price

AS3166 Elastic Retainer 1 1 A 18.00


AS3167 Assembly of Filler Cap - Air Valve Type 2 1 A 18.00
AS3168 Air Valve for Filler Cap. (AS1964) 1 1 A 18.00
AS3170 Assembly of Handhole Cover 1 1 A 18.00
AS3171 Cover Plate 1 1 A 18.00
AS3172 Circlip 2 1 A 18.00
AS3173 Circlip Housing 1 1 A 18.00
AS3174 Finger Hinge 2 1 A 18.00
AS3175 Bridge Piece 1 1 A 18.00
AS3176 Spring 1 1 A 18.00
AS3177 Lug for Lanyard 1 1 A 18.00
AS3178 Retaining Ring 1 1 A 18.00
AS3179 Handhole Cover - Curved 4 1 A 18.00
AS3180 P Clips Rubber Covered 12 1 A 18.00
AS3181 P Clips 3 1 A 18.00
AS3194 Knob (Glider Release Control) 3 1 A 18.00
AS3195 Knob (Arrestor Hook Control) 4 1 A 18.00
AS3196 Fuel Cock Knob (Low Pressure) 1 1 A 18.00
AS3197 Knob (Canopy Winding Gear) 3 1 A 18.00
AS3199 Knob (Mixture Control) 3 1 A 18.00
AS3200 Connector Tag - Push Button 2 1 A 18.00
AS3201 Connector Tag for Push Button 2 1 A 18.00
AS3202 Switch Lever Spigot 2 1 A 18.00
AS3203 Locating Dowel for Push Switch 3 1 I 18.00
AS3205 Handwheel Assembly, showing Switch Fixings 1 1 A 18.00
AS3208 Knob (Canopy Control) 3 1 I 18.00
AS3210 Assembly of Standard Tubes for Oil Coolers 1 1 A 18.00
AS3211 Standard Tubes for Oil Coolers, Hexagon Ends 1 1 A 18.00
AS3212 Standard Tubes for Oil Coolers, Pentagon Ends 1 1 A 18.00
AS3213 Standard Tubes for Oil Coolers, Half Tube 1 1 A 18.00
AS3214 Standard Tubes for Oil Coolers, Hexagon Ends - Double 1 1 A 18.00
ENpansion
AS3215 Standard Tubes for Oil Coolers, Pentagon Ends, CExtral Bulge 1 1 A 18.00
AS3216 Standard Tubes for Oil Coolers, Hexagon Ends - Double 1 1 A 18.00
ENpansion, CExtral Bulge
AS3217 Standard Tubes for Oil Coolers, Hexagon Ends, CExtral Bulge 1 1 A 18.00
AS3218 Standard Tubes for Oil Coolers, Dummy Dee Tube 1 1 A 18.00
AS3220 Filter - Fuel Type A Assembly, 100 G.P.H. 2 1 A 18.00
AS3221 Casing - Top Half. Filter Fuel Type A 1 1 A 18.00
AS3222 Screen Filter Fuel Type 'A' 1 1 A 18.00
AS3223 Casing - Bottom Half. Filter Fuel Type A 1 1 A 18.00
AS3224 Jointing Washer - Filter Fuel Type A 1 1 A 18.00
AS3225 Spring Filter Fuel Type A 1 1 A 18.00
AS3226 Strainer Assembly - Filter Fuel Type A 3 1 A 18.00

39
Reference Title Edition Pages Status Price

AS3227 Bottom Cup - Strainer - Filter Fuel Type A 2 1 A 18.00


AS3228 Outer U Ring Strainer - Filter Fuel Type A 2 1 A 18.00
AS3229 Outer Wire Support - Strainer - Filter Fuel Type A 2 1 A 18.00
AS3230 Inner Bottom Wire Support - Strainer - Filter Fuel Type A 2 1 A 18.00
AS3231 Inner Top Wire Support - Strainer Filter Fuel type A 2 1 A 18.00
AS3232 Support for embossed Plate - Strainer - Filter Fuel Type A 2 1 A 18.00
AS3233 Embossed Top Plate - Strainer - Filter Fuel Type A 2 1 A 18.00
AS3234 Spring Cup - Strainer - Filter Fuel Type A 2 1 A 18.00
AS3235 Top Cap - Strainer - Filter Fuel Type A 2 1 A 18.00
AS3236-3239 Connecting Strap - Strainer - Filter Fuel Type A & B 2 1 A 18.00
AS3240 Inner Gauge - Strainer - Filter Fuel Type A 1 1 A 18.00
AS3241 Outer Gauge - Strainer -Filter Fuel Type A 1 1 A 18.00
AS3242 Stirrup Nut - Filter Fuel Type A 1 1 A 18.00
AS3243 Stirrup - Filter Fuel Type A 2 1 A 18.00
AS3244 Stirrup Eyebolt - Filter Fuel Type A 1 1 A 18.00
AS3245 Stirrup Distance Piece - Filter Fuel Type A 1 1 A 18.00
AS3250 Filter Fuel Type B Assembly, 200 G.P.H. 2 1 A 18.00
AS3251 Casing - Top Half. Filter Fuel Type B 1 1 A 18.00
AS3252 Screen - Filter Fuel Type B 1 1 A 18.00
AS3253 Casing - Bottom Half - Filter Fuel Type B 1 1 A 18.00
AS3254 Jointing Washer - Filter Fuel Type B 1 1 A 18.00
AS3255 Spring. Filter Fuel Type B 1 1 A 18.00
AS3256 Strainer Assembly - Filter Fuel Type B 2 1 A 18.00
AS3257 Bottom Cup - Strainer - Filter Fuel Type B 2 1 A 18.00
AS3258 Outer U Ring Strainer - Filter Fuel Type B 2 1 A 18.00
AS3259 Outer Wire Support - Strainer - Filter Fuel Type B 2 1 A 18.00
AS3260 Inner Bottom Wire Support - Strainer - Filter Fuel Type B 2 1 A 18.00
AS3261 Inner Top Wire Support - Strainer - Filter Fuel Type B 2 1 A 18.00
AS3262 Support for embossed Plate Bottom - Strainer - Filter Fuel Type 2 1 A 18.00
B
AS3263 Embossed Top Plate - Strainer - Filter Fuel Type B 2 1 A 18.00
AS3264 Spring Cup - Strainer - Filter Fuel Type B 2 1 A 18.00
AS3265 Top Cap - Strainer - Filter Fuel Type B 2 1 A 18.00
AS3266 Inner Gauze Strainer - Filter Fuel Type B 1 1 A 18.00
AS3267 Outer Gauze - Strainer - Filter Fuel Type B 1 1 A 18.00
AS3268 Stirrup - Filter Fuel Type B 2 1 A 18.00
AS3269 Stirrup Eyebolt - Filter Fuel Type B 1 1 A 18.00
AS3270 Stirrup Nut - Filter Fuel Type B 1 1 A 18.00
AS3271 Stirrup Distance Piece - Filter Fuel Type B 1 1 A 18.00
AS3272 Union Locknut - Filter Fuel Type B 2 1 A 18.00
AS3273 D Ring - Filter Fuel Type B 1 1 A 18.00
AS3274 Tab Washer - Filter Fuel Type B 2 1 A 18.00
AS3281-3288 Attachment Pin 1 1 A 18.00
AS3289 Cover Plate 2 1 A 18.00

40
Reference Title Edition Pages Status Price

AS3290 Hinge Bracket 2 1 A 18.00


AS3291-3292 Spring 2 1 A 18.00
AS3293 G.A. & Assembly of Control Column 2 1 A 18.00
AS3294 Bolt - Phillips 90 Countersunk Head 7 1 A 18.00
AS3295 Bolt - Phillips Raised 90 Countersunk Head 7 1 A 18.00
AS3296 Bolt - Phillips Raised 120 Countersunk Head 7 1 A 18.00
AS3297 Bolt - Phillips 120 Countersunk Head 7 1 A 18.00
AS3298 Filler Cap 1 1 A 18.00
AS3300 Drain Valve Assembly 2 1 A 18.00
AS3301 Valve (for Drain Valve Assembly) 1 1 A 18.00
AS3302 Union Nut (for Drain Valve Assembly) 1 1 A 18.00
AS3303 Release Nut (for Drain Valve Assembly) 1 1 A 18.00
AS3304 Stop for Drain Valve 1 1 A 18.00
AS3305 Switch Body Assembly Pilots Control Wheel 1 1 A 18.00
AS3306 Locking Plate - Switch Lever 2 1 A 18.00
AS3310 300 G.P.H. Fuel Filter Assembly 2 1 I 18.00
AS3311 Filter Head Casting 3 2 A 30.00
AS3312 Bearing for Filter Head 3 1 A 18.00
AS3313 Sump (called for on AS5420) 3 1 A 18.00
AS3314 Filter Sump Joint Ring 3 1 A 18.00
AS3315 Stirrup Assembly 2 1 A 18.00
AS3316 Filter Pack Assembly 2 1 I 18.00
AS3317 Filter Lamination 3 1 A 18.00
AS3318 Baffle Plate - Filter Pack 3 1 A 18.00
AS3319 Bottom Ring - Filter Pack 3 1 A 18.00
AS3320 Rod - Filter Pack 2 1 I 18.00
AS3321 Top Plate - Filter Pack 3 1 A 18.00
AS3322 Stabilising Ring - Filter Pack 3 1 A 18.00
AS3323 Top Plug for Rod - Filter Pack 2 1 I 18.00
AS3324 Stirrup - Filter Sump 1 1 A 18.00
AS3325 Clamping Screw - Filter Stirrup 2 1 A 18.00
AS3326 Centre Pin (Clamping Screw) 2 1 A 18.00
AS3327 End Cap (Centre Pin) 2 1 A 18.00
AS3328 Stirrup Screw 1 1 A 18.00
AS3330 Bore Water/Sediment Drain Valve 2 1 I 18.00
AS3331 Bore Drain Valve 4 1 I 18.00
AS3332 Valve Spindle - Bore Drain Valve 3 1 A 18.00
AS3333 Insert - Bore Drain Valve 2 1 A 18.00
AS3334 Valve - Bore Drain Valve 2 1 A 18.00
AS3335 Spring - Bore Drain Valve 2 1 I 18.00
AS3336 Cap - Bore Drain Valve 4 1 I 18.00
AS3337 Washer - Bore Drain Valve 2 1 A 18.00
AS3338 Chain Tag Washer- Bore Drain Valve 2 1 A 18.00

41
Reference Title Edition Pages Status Price

AS3339 Chain Clip - Bore Drain Valve 2 1 A 18.00


AS3341 Control - Single Lever for Anti-Spin Parachutes 1 1 A 18.00
AS3342 Box - Single Lever Parachute Control 2 1 A 18.00
AS3343 Housing 1 1 A 18.00
AS3344 Plunger 3 1 A 18.00
AS3345 Spring 2 1 A 18.00
AS3346 Grub Screw (for Plunger Assembly) 1 1 A 18.00
AS3347 Fork End 1 1 A 18.00
AS3348 Plunger Assembly 1 1 A 18.00
AS3350 Assembly of Thermal Relief Valve 2 1 I 18.00
AS3351 Valve Body (for Thermal Relief Valve - AS3350) 2 1 I 18.00
AS3352 Valve Cap (for Thermal Relief Valve - AS3350) 2 1 I 18.00
AS3353 Sleeve (for Thermal Relief Valve - AS3350) 3 1 A 18.00
AS3354 Plunger (for Thermal Relief Valve - AS3350) 2 1 I 18.00
AS3355 Spring for Valve (for Thermal Relief Valve - AS 3350) 2 1 I 18.00
AS3356 Spring Retainer (for Thermal Relief Valve - AS3350) 3 1 A 18.00
AS3357 Gasket (for Thermal Relief Valve - AS3350) 2 1 A 18.00
AS3358 Shim (for Thermal Relief Valve - AS3350) 2 1 I 18.00
AS3360 Bonding Flexibles - General 6 1 I 18.00
AS3362 Close Tolerance Rivet (90 Countersunk Head) 5 1 A 18.00
AS3363 Close Tolerance Rivet (120 Countersunk Head) 5 1 A 18.00
AS3364 Ferrule - Vacuum Flask Stowage 1 1 A 18.00
AS3365 Assembly of Filler Cap, with Vent 5 1 I 18.00
AS3366 Assembly of Filler Cap, without Vent 5 1 I 18.00
AS3367 Filler Cap (Sub-Assembly) 4 1 I 18.00
AS3368 Filler Cap 4 1 I 18.00
AS3369 Filler Cap Base - with Vent 4 1 I 18.00
AS3370 Filler Cap Base - without Vent 3 1 I 18.00
AS3371 Spring 4 1 A 18.00
AS3374 Grub Screw 5 1 A 18.00
AS3375 Pin 3 1 A 18.00
AS3376 Non-Return Valves - Hydraulic (see Sheet 2 for Test Schedule) 3 2 A 30.00
AS3377 Body - (for Non-Return Valve) 1 1 A 18.00
AS3378 Plug (for Non-Return Valve) 1 1 A 18.00
AS3379 Valve (for Non-Return Valve) 1 1 A 18.00
AS3380 Spring (for Non-Return Valve) 1 1 A 18.00
AS3381 Sealing Ring (for Non-Return Valve) 1 1 A 18.00
AS3382 Non-Return Valves Hydraulic (see AS3376 Sheet 2 for Test 3 1 A 18.00
Schedule)
AS3383 Body (for Non-Return Valve) 1 1 A 18.00
AS3384 Plug (for Non-Return Valve) 1 1 A 18.00
AS3385 Valve (for Non-Return Valve) 1 1 A 18.00
AS3386 Spring (for Non-Return Valve) 1 1 A 18.00
AS3387 Sealing Ring (for Non-Return Valve) 1 1 A 18.00

42
Reference Title Edition Pages Status Price

AS3388 Non-Return Valve Hydraulic (see AS3376 Sheet 2 for Test 3 1 A 18.00
Schedule)
AS3389 Body (for Non-Return Valve) 1 1 A 18.00
AS3390 Plug (for Non-Return Valve) 1 1 A 18.00
AS3391 Valve (for Non-Return Valve) 1 1 A 18.00
AS3392 Spring (for Non-Return Valve) 1 1 A 18.00
AS3393 Sealing Ring (for Non-Return Valve) 1 1 A 18.00
AS3394 Retaining Link 4 1 A 18.00
AS3397 End Plate for Stirrup (Rudder Bar) 2 1 I 18.00
AS3398 Washer for Rudder Bar 2 1 A 18.00
AS3399 Taper Bolt - Rudder Bar 4 1 A 18.00
AS4500-4502 Protection Cap for Propeller Shaft 1 1 A 18.00
AS4503-4505 Protection Cap for Propeller Shaft 3 1 I 18.00
AS4506-4511 Protection Cap for Propeller Shaft 1 1 A 18.00
AS4521 Split Reinforcing Ring used on Filler Cap AS2398 1 1 A 18.00
AS4522 Split Reinforcing Ring used on Filler Cap AS2510 1 1 A 18.00
AS4523 Bore Sediment Valve 2 1 I 18.00
AS4524 Spring - Bore Drain Valve 2 1 A 18.00
AS4525 Support Clips, Rubber covered with Earthing Tongue 9 1 A 18.00
AS4526 Support Clips, Rubber covered with Earthing Tongue 8 1 A 18.00
AS4527 Stud for Cable Fastening 3 1 A 18.00
AS4528 Flexible Strip (for Cable Fastening) 3 1 A 18.00
AS4549-4550 Assembly of Thermal Relief Valve (Test Schedule see Sheet 2) 3 2 A 30.00
AS4551 Valve Body (for Thermal Relief Valve) 2 1 A 18.00
AS4552 Valve Cap (for Thermal Relief Valve) 3 1 A 18.00
AS4553 Plunger (for Thermal Relief Valve) 2 1 A 18.00
AS4554 Spring for Valve 4 1 A 18.00
AS4555 Shim (for Thermal Relief Valve) 1 1 A 18.00
AS4556 Hood Jettison Release Handle 2 1 A 18.00
AS4558 Knob for Cockpit Heating Control 2 1 I 18.00
AS4559 Control Knob for Emergency Oxygen 1 1 A 18.00
AS4561 Wire Locking Tabs 1 1 A 18.00
AS4562 Plain Washers (Precision) 2 1 A 18.00
AS4563 Bolt, 90 Countersunk Head, Aluminium Alloy 7 1 A 18.00
AS4564 Bolt, Raised 90 Countersunk Head, Aluminium Alloy 6 1 A 18.00
AS4565 Bolt, Round Head, Aluminium Alloy 6 1 A 18.00
AS4566 Bolt, Mushroom Head, Aluminium Alloy 6 1 A 18.00
AS4567 End Plate for Stirrup (Rudder Bar) 1 1 A 18.00
AS4568 Stirrup (Rudder Bar) 3 1 A 18.00
AS4569 Bolts, 2BA Hexagon, Close Tolerance 7 1 A 18.00
AS4570 Retaining Rings 4 8 A 65.00
AS4571 Circlips 4 8 A 65.00
AS4572 Typical Assembly of Retained Bolts - Double Anchor Nuts 1 2 A 30.00
AS4573 Steel Retaining Ring 3 1 A 18.00

43
Reference Title Edition Pages Status Price

AS4574 Packing Plates for Steel Retaining Rings - Double Anchor Nuts 1 1 A 18.00
AS4575 Nylon Retaining Ring 2 1 A 18.00
AS4576 Packing Plates for Nylon Retaining Rings - Double Anchor Nuts 1 1 A 18.00
AS4577 Packing Plates for Steel Retaining Rings - Single Anchor Nuts 1 1 A 18.00
AS4578 Packing Plates for Nylon Retaining Rings - Single Anchor Nuts 1 1 A 18.00
AS4580 Clip 6 1 I 18.00
AS4581 Clip with Earthing Tongue 4 1 A 18.00
AS4585 Flush Water / Sediment Drain Valve 1 1 A 18.00
AS4586 Body Assembly (called for on AS4585) 1 1 A 18.00
AS4587 Valve (called for on AS4585) 1 1 A 18.00
AS4588 Seal (called for on AS4585) 2 1 A 18.00
AS4589 Ballast Weight. 10LB 1 1 A 18.00
AS4590 Ballast Weight. 17.5LB 2 1 A 18.00
AS4591-4592 Pivot Plate - Extension to Seat Well 3 1 I 18.00
AS4593 Washer Plate - Starboard Side 3 1 I 18.00
AS4594 Washer Plate - Port Side 3 1 I 18.00
AS4595 Washer Plate 3 1 I 18.00
AS4596 Packing Washer 4 1 I 18.00
AS4597 Bolt - Phillips Round Head 6 1 A 18.00
AS4598 Bolt - Phillips Mushroom Head 6 1 A 18.00
AS4599-4600 120 Countersunk Head Bolt 3 1 I 18.00
AS4601 Wire Thread Inserts (BA, BSF & BSW) Unplated 6 1 I 18.00
AS4602-4613 Wire Thread Inserts (BSPF) Unplated 6 1 I 18.00
AS4630 Assembly of Firing Sleeve and Stowage for Signal Pistol 1 1 A 18.00
AS4631 Sleeve (called for on AS4630) 1 1 A 18.00
AS4632 Casing (called for on AS4630) 1 1 A 18.00
AS4633 Plate (called for on AS4630) 1 1 A 18.00
AS4634 Recoil Ring (called for on AS4630) 1 1 A 18.00
AS4635 Washer (called for on AS4630) 1 1 A 18.00
AS4636 Corner Washer (called for on AS4630) 1 1 A 18.00
AS4639 Base - Earth Terminal 4 B.A. 1 1 A 18.00
AS4640 Base - Earth Terminal 6 B.A. 1 1 A 18.00
AS4641 Assembly of Filler Cap MK.11 with Vent 1 1 I 18.00
AS4642 Assembly of Filler Cap MK.11 without Vent 1 1 I 18.00
AS4643 Lid Assembly - Flush Filler Cap MK 11 2 1 I 18.00
AS4644 Filler Cap 2 1 A 18.00
AS4645 Oversize-Shank Rivet Countersunk 90 (Obsolescent) 2 1 I 18.00
AS4646 Oversize-Shank Rivet Countersunk 90 (Obsolescent) 2 1 I 18.00
AS4647 Oversize-Shank Rivet Countersunk 120 (Obsolescent) 2 1 I 18.00
AS4648 Oversize-Shank Rivet Countersunk 120 (Obsolescent) 2 1 I 18.00
AS4649 Retaining Cable (Filler Cap) 2 1 A 18.00
AS4670-4675 Flanged Bush 3 1 I 18.00
AS4676-4693 Clips Nylastic, Bushed 2 1 I 18.00

44
Reference Title Edition Pages Status Price

AS4694 Rivet - Snap Head 4 1 I 18.00


AS4695 Rivet - Countersunk 90 4 2 I 30.00
AS4696 Rivet - Countersunk 120 4 2 I 30.00
AS4697 Clips 1 1 A 18.00
AS4698 Vacuum Flask Stowage, 2 Unit 2 1 A 18.00
AS4699 Vacuum Flask Stowage, 1 Unit 2 1 A 18.00
AS4700 Wire Thread Inserts (BA, BSF& BSW) Unplated 5 1 I 18.00
AS4701-4712 Wire Thread Inserts (BSPF) Unplated 5 1 I 18.00
AS4713 Flexible Strapping 2 1 A 18.00
AS4714 Cable Stud 3 1 A 18.00
AS4715 Cable Stud 2 1 A 18.00
AS4725 Assembly of 500 G.P.H. Filter 1 1 A 18.00
AS4726 Assembly of Filter Bowl (for 500 G.P.H. Filter) (used on AS4725) 2 1 A 18.00
AS4727 Filter Bowl Seat (for 500 G.P.H. Filter) (used on AS4731) 2 1 A 18.00
AS4728 Filter Bowl (for 500 G.P.H. Filter) (used on AS4731) 2 1 A 18.00
AS4729 Fin (used on AS4726) 2 1 A 18.00
AS4730 Fin Centre for Filter Pack Support (used on AS4726) 3 1 A 18.00
AS4731 Filter Bowl - Sub-Assembly (used on AS4726) 2 1 A 18.00
AS4736 Wire Thread Inserts (BA, BSF & BSW) Unplated 5 2 I 30.00
AS4737-4748 Wire Thread Inserts (BSPF) Unplated 5 1 I 18.00
AS4749 Assembly of Filler Cap MK.II with Vent 2 1 I 18.00
AS4750 Assembly of Filler Cap MK.II without Vent 2 1 I 18.00
AS4751 Lid Assembly - Flush Filler Cap MKII 1 1 A 18.00
AS4752 Single Anchor Bolt - B.A. and B.S.F. 1 1 A 18.00
AS4753 Double Anchor Bolt - B.A. and B.S.F. 1 1 A 18.00
AS4754 Bolts - Weldable (B.A. and B.S.F.) 2 1 A 18.00
AS4755 Plate for Single Anchor Bolt - B.A. and B.S.F. 1 1 A 18.00
AS4756 Plate for Double Anchor Bolt - B.A. and B.S.F. 1 1 A 18.00
AS4760 Bore - Sediment Drain Valve 4 1 A 18.00
AS4761 Body ( Bore Drain Valve) 1 1 A 18.00
AS4762 Cap ( Bore Drain Valve) 1 1 A 18.00
AS4799 Spring Clip (Cable Duct) 2 1 A 18.00
AS4800 Cable Duct (Typical Assembly) 4 1 A 18.00
AS4805 Capping (Cable Duct) 1.28 Wide 4 1 I 18.00
AS4806 Capping (Cable Duct) 1.09 Wide 4 1 I 18.00
AS4807 Capping (Cable Duct) .88 Wide 4 1 I 18.00
AS4808 Capping (Cable Duct) .72 Wide 4 1 I 18.00
AS4809-4812 Packing Piece for Cable Duct 2 1 A 18.00
AS4813-4816 Tee Piece for Packing 2 1 A 18.00
AS4817-4820 Cap for Packing Piece 2 1 A 18.00
AS4821 Spacer (Cable Duct) 2 1 A 18.00
AS4822-4825 Spring Clip (Cable Duct) 2 1 A 18.00
AS4830-4853 Sprocket (Blanks) for Chains, Non-Reversible Control 1 1 A 18.00

45
Reference Title Edition Pages Status Price

AS4854-4877 Sprocket (Blanks) for Chains, Non-Reversible Control 1 1 A 18.00


AS4880 Float Operated Cut-Off Valve 2 1 A 18.00
AS4881 Float Assembly 3 1 A 18.00
AS4882 Float (called for on AS4881) 1 1 A 18.00
AS4883 Float Support Strap (called for on AS4881) 1 1 A 18.00
AS4884 Distance Bush (called for on AS4881) 1 1 A 18.00
AS4885 Rivet - Float (called for on AS4881) 1 1 A 18.00
AS4886 Bumper Pad (called for on AS4881) 1 1 A 18.00
AS4887 Bracket for Float (called for on AS4881) 1 1 A 18.00
AS4888 Rivet - Float Strap to Bracket (called for on AS4881) 1 1 A 18.00
AS4889 Connecting Rod Assembly (for Float Operated Cut-Off Valve) 3 1 A 18.00
AS4890 Connecting Rod 1 1 A 18.00
AS4891 Spring (for Connecting Rod Assembly) (AS4889) 2 1 A 18.00
AS4892 Spring Float Needle (Conical) (called for on AS4889) 2 1 A 18.00
AS4893 Collar Float Needle Conical Rod 1 1 A 18.00
AS4894 Washer (called for on AS4889) 1 1 A 18.00
AS4895 Rivet (called for on AS4889) 1 1 A 18.00
AS4896 Bracket 3 1 A 18.00
AS4897 Adaptor (Drop Tank) (called for on AS4880) 3 1 A 18.00
AS4898 Seating 3 1 A 18.00
AS4899 Needle Float Chamber 3 1 A 18.00
AS4900 Link Pin 3 1 A 18.00
AS4901 Link Pin - Float 3 1 A 18.00
AS4902 Dowel - Tubular 3 1 A 18.00
AS4903 Set Screw for Float Operated Cut Off Valve 2 1 A 18.00
AS4904 Tab Washer - Float Bracket 3 1 A 18.00
AS4905 Tab Washer Gas 3 1 A 18.00
AS4906 Assembly of Accumulator Trough, 24V. 40Ah 1 1 A 18.00
AS4907 Accumulator Trough 24V 40Ah 3 1 I 18.00
AS4908 Boundary Ring for Accumulator Trough 2 1 A 18.00
AS4909 Retaining Strap Accumulator Trough 3 1 I 18.00
AS4910 Absorbent Pad (Side) 2 1 I 18.00
AS4911 Absorbent Pad (Base) 2 1 I 18.00
AS4912 Absorbent Pad (Base) 2 1 I 18.00
AS4913-4920 Protection Covers for Flanges and Drives 1 1 A 18.00
AS4921 Wire Thread Inserts (BA, BSF & BSW) Cadmium Plated 5 1 I 18.00
AS4922-4933 Wire Thread Inserts (BSPF) Cadmium Plated 5 1 I 18.00
AS4934 Wire Thread Inserts (BA, BSF & BSW) Cadmium Plated 5 1 I 18.00
AS4935-4946 Wire Thread Inserts (BSPF) Cadmium Plated 5 1 I 18.00
AS4947 Wire Thread Inserts (BA, BSF & BSW) Cadmium Plated 5 2 I 30.00
AS4948-4959 Wire Thread Inserts (BSPF) Cadmium Plated 5 1 I 18.00
AS4960 Rubber Pad - Control Stops 1 1 A 18.00
AS5339 Assembly of Accumulator Trough, 12V 15Ah 1 1 A 18.00

46
Reference Title Edition Pages Status Price

AS5340 Accumulator Trough 12V 25Ah 3 1 I 18.00


AS5341 Accumulator Trough 12V 40Ah 3 1 I 18.00
AS5342 Boundary Ring for Plastic Trough, 25 AH 1 1 A 18.00
AS5343 Boundary Ring for Plastic Trough, 40 AH 1 1 A 18.00
AS5344 Retaining Strap - Accumulator Trough 3 1 I 18.00
AS5345 Stud for Accumulator Trough 3 1 I 18.00
AS5346 Absorbent Pads for Accumulator Trough, 15Ah & 25Ah 2 1 I 18.00
AS5347 Absorbent Pads - Accumulator Trough, 40Ah 1 1 A 18.00
AS5348 Absorbent Pads - Bottom Accumulator Trough, 15Ah & 25Ah 2 1 I 18.00
AS5349 Absorbent Pads - Bottom Accumulator Trough, 15Ah & 25 Ah 2 1 I 18.00
AS5350 Absorbent Pads - Bottom Accumulator Trough, 40Ah 1 1 A 18.00
AS5351 Absorbent Pads - Bottom Accumulator Trough, 40Ah 2 1 I 18.00
AS5352 Accumulator Trough, 12V 15AH 3 1 I 18.00
AS5353 Assembly of Accumulator Trough, 12V 25Ah 1 1 A 18.00
AS5354 Assembly of Accumulator Trough, 12V 40Ah 1 1 A 18.00
AS5362 Washer - Front Spigot - Control Column 2 1 A 18.00
AS5363 Rubber Pad, Control Stops 3 1 I 18.00
AS5364 Filler Sealing Ring 6 1 A 18.00
AS5365 Forging for Control Column Housing 1 1 A 18.00
AS5366 Forging for Control Column Housing 1 1 A 18.00
AS5367 Quadrant Lever Forging - Pilots Seat-Raising Gear 2 1 I 18.00
AS5368 Lever Forging - Pilots Seat-Raising Gear 2 1 I 18.00
AS5369 Loose Collar 3 1 A 18.00
AS5370 Top Link Forging - Pilots Seat-Raising Gear 2 1 I 18.00
AS5371 Main Bearing Bracket Forging - Pilots Seat-Raising Gear 2 1 I 18.00
AS5372 Quadrant Forging - Pilots Seat-Raising Gear 2 1 I 18.00
AS5373 Spider 3 1 A 18.00
AS5374 Spider 1 1 A 18.00
AS5375 Spacer 2 1 A 18.00
AS5376 Stop Plate 2 1 A 18.00
AS5377 Stop Pin 2 1 A 18.00
AS5378 Stop (called for on AS2840-99) 1 1 A 18.00
AS5379 Stop Bolt (called for on AS5378) 1 1 A 18.00
AS5380 Spring (for Stop) 2 1 A 18.00
AS5381 Seal for Push Button 2 1 A 18.00
AS5382 Pivet Bolt 1 1 A 18.00
AS5383 Operating Sleeve L.H. 3 1 A 18.00
AS5384 Operating Sleeve R.H. 3 1 A 18.00
AS5401-5416 Sealing Ring - Cancelled Drawing see AS63850-63864 for I
replacement
AS5418 Support Clips - Rubber Covered 9 1 I 18.00
AS5419 Support Clips - Rubber Covered 8 1 I 18.00
AS5419-AR AS5419 Amendment Record 8 1 I 18.00
AS5420 300 G.P.H. Fuel Filter Assembly 2 1 A 18.00

47
Reference Title Edition Pages Status Price

AS5421 Filter Pack Assembly (for 300 G.P.H. Fuel Filter) 1 1 A 18.00
AS5422 Rod for Filter Pack (called for on AS5421) 1 1 A 18.00
AS5423 Flanged Plug 2 1 A 18.00
AS5426 Filter Head (called for on AS4725) 2 1 A 18.00
AS5431 Stirrup Assembly (called for on AS4725) 2 1 A 18.00
AS5432 Stirrup - Filter Bowl (called for on AS5431) 1 1 A 18.00
AS5433 Stirrup Screw (called for on AS5431) 1 1 A 18.00
AS5434 Filter Pack Assembly (called for on AS4725) 2 1 A 18.00
AS5435 Rod for Filter Pack (called for on AS5435) 1 1 A 18.00
AS5439 Clamp Type Joints (Typical Assembly) 7 1 I 18.00
AS5440-5458 Coupling Flange, Grooved 5 1 I 18.00
AS5459-5477 Coupling Flange, Plain 3 1 I 18.00
AS5550-5605 Chain (8mm Pitch) & Fittings Assembly Code (Non-reversible 4 1 I 18.00
Control)
AS5606-5653 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 3 1 I 18.00
Control)
AS5654-5701 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 3 1 I 18.00
Control)
AS5702-5783 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 4 1 I 18.00
Control)
AS5784-5813 Chain (8mm Pitch) & Fittings Assembly Code (Non-reversible 4 1 I 18.00
Control)
AS5814-5861 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 3 1 I 18.00
Control)
AS5862-5909 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 3 1 I 18.00
Control)
AS5910-5991 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 4 1 I 18.00
Control)
AS5992-6021 Chain (8mm Pitch) & Fittings Assembly Code (Non-reversible 4 1 I 18.00
Control)
AS6022-6069 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 3 1 I 18.00
Control)
AS6070-6117 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 3 1 I 18.00
Control)
AS6118-6199 Chain ( Pitch) & Fittings Assembly Code (Non-reversible 4 1 I 18.00
Control)
AS6200 Assembly of Accumulator Tray, 12Volt, 40Ah, (Unified Thread) 1 1 A 18.00
AS6201 Assembly of Accumulator Tray, 12Volt, 15 & 25Ah, (Unified 1 1 A 18.00
Thread)
AS6202 Bolt Assembly - Attachment of Lead - Acid Accumulators 2 1 A 18.00
AS6203 Bolt - Accumulator Attachment 1 1 A 18.00
AS6207 Filler Cap 1 1 A 18.00
AS6208 120 Countersunk Head Bolt (6 U.N.C.) 2 1 I 18.00
AS6213-6218 Trunnion 1 1 A 18.00
AS6219 Wing Nut for Accumulator Tray 2 1 I 18.00
AS6220 Trim Control Assembly 90 Drive 2 1 A 18.00
AS6221 Assembly of Handle 2 1 I 18.00
AS6222 Bevel & Shaft (Sprocket) Trim Control 1 1 A 18.00
AS6223 Press Button - Pilots Seat Raising Gear 2 1 I 18.00

48
Reference Title Edition Pages Status Price

AS6225 Trim Control Assembly, Direct Drive 2 1 A 18.00


AS6226 Shaft Trim control Direct Drive 1 1 A 18.00
AS6227 Plunger Operating Rod - Pilots Seat Raising Gear 2 1 I 18.00
AS6228 Trim Control Assy. 90 Drive 2 1 A 18.00
AS6229 Trim Control Assy. Direct Drive 2 1 A 18.00
AS6230 Assy. of Pilot's Seat & Raising Gear 25G 2 1 I 18.00
AS6231 Assembly of Pilot's Seat & Raising Gear 25G 2 1 A 18.00
AS6232 Assy. Of Torque Shaft & Handle for Pilot's Seat Raising Gear 2 1 I 18.00
AS6233 Thin Castle Nut for Pilot's Seat Raising Gear 2 1 A 18.00
AS6234 Bearing Bolt Pilot's Seat Raising Gear 3 1 A 18.00
AS6235 Quadrant Assy. Pilots Seat Raising Gear 2 1 A 18.00
AS6236 Plug End Pilot's Seat Raising Gear 2 1 A 18.00
AS6237 Torque Tube Pilot's Seat Raising Gear 2 1 A 18.00
AS6238 Quadrant Stop Pilot's Seat Raising Gear 2 1 A 18.00
AS6239 Crew Seat 25G 2 1 I 18.00
AS6240 Wing Nut Oxygen Cradle 2 1 I 18.00
AS6241 Hand Nut 2 1 A 18.00
AS6245 Assy. Of Cradle for Oxygen Bottle 1 1 A 18.00
AS6246 Bolt Wing Oxygen Cradle 2 1 A 18.00
AS6247 Shank Wing Bolt 1 1 A 18.00
AS6248 G.A. & Assembly of Control Column 1 1 A 18.00
AS6249 Control Column Assy. 1 1 A 18.00
AS6250 Housing Control Column 1 1 A 18.00
AS6251 Front Ball Race Spigot, Control Column 1 1 A 18.00
AS6252 Bolt 3/8" Dia. Control Column 2 1 A 18.00
AS6253 Adjustable Stop, Control Column 2 1 A 18.00
AS6254 Sleeve for Adjustable Stop 1 1 A 18.00
AS6255 Bolt 5/16" Dia. (Unified), Control Column 2 1 A 18.00
AS6256 Body - Trim Control 2 1 A 18.00
AS6257 Housing Trim Control 2 1 A 18.00
AS6258 Cover-Plate Trim - Control 1 1 A 18.00
AS6259 Chain Guard Trim Control 1 1 A 18.00
AS6260 Housing Trim Control 3 1 A 18.00
AS6261 Trunion For Strap 1 1 A 18.00
AS6262 Strap for Oxygen Craddle 1 1 A 18.00
AS6263 Dip Stick 1 1 A 18.00
AS6264-267 Filler Cap Small Plastic 1 1 A 18.00
AS6268-269 Assembly of Cap & Dipstick 1 1 A 18.00
AS6270 Assembly of Flush Drain Valve 1" Bore 2 1 A 18.00
AS6271 Valve Body 3 2 A 30.00
AS6272 Valve 4 1 A 18.00
AS6273 Valve Guide 2 1 A 18.00
AS6274 Valve Cap 4 1 A 18.00

49
Reference Title Edition Pages Status Price

AS6275 Valve Spring 1 1 A 18.00


AS6276 Cap Spring 3 1 A 18.00
AS6277 Cap Seal 3 1 A 18.00
AS6278 Valve Seal 3 1 A 18.00
AS6279-286 Tapped Ring for Drain Valve 3 2 A 30.00
AS6287 Tapped Ring for Drain Valve 3 2 A 30.00
AS6288 Tapped Ring for Drain Valve (AS6270) 2 1 A 18.00
AS6289 Tank Drainage Connection Drain Valve AS6270 - 1 1 1 A 18.00
AS6290 Adaptor - 1, (Tank Drainage Connection) 1 1 A 18.00
AS6291 Seal 2 1 A 18.00
AS6295 Assembly of Flush Drain Valve, 2 Bore 1 1 A 18.00
AS6296 Valve Body & Casting (for Flush Drain Valve - AS6295) 2 2 A 30.00
AS6297 Flush Drain Valve 3 1 A 18.00
AS6298 Valve Guide for Flush Drain Valve 2 1 A 18.00
AS6299 Valve Cap for Flush Drain Valve 3 1 A 18.00
AS6300 Valve Spring for Flush Drain Valve 1 1 A 18.00
AS6301 Cap Seal for Flush Drain Valve 3 1 A 18.00
AS6302 Valve Seal for Flush Drain Valve 3 1 A 18.00
AS6303-6310 Tapped Ring for Drain Valve AS6295 3 2 A 30.00
AS6311 Tapped Ring for Drain Valve AS6295 3 2 A 30.00
AS6312 Stamping Tapped Ring for Drain Valve AS6295 2 1 A 18.00
AS6313 Tank Drainage Connection - Drain Valve AS6295 - 2 1 1 A 18.00
AS6314 Adaptor for Tank Drainage Connection - 2 1 1 A 18.00
AS6315 Seal 2 1 A 18.00
AS6316 Wire Thread Inserts (UNF) Unplated (Inactive for new Designs 7 1 I 18.00
refer to AS6733)
AS6317 Wire Thread Inserts (UN.C.) Unplated (Inactive for new Designs 7 1 I 18.00
refer to AS6734)
AS6318 Assembly of Filler Cap with Vent 2 1 I 18.00
AS6319 Assembly of Filler Cap without Vent 2 1 I 18.00
AS6320 Filler Cap Base with Vent 5 1 A 18.00
AS6321 Filler Cap Base without Vent 3 1 A 18.00
AS6322 Assembly of Bonding Socket 3 1 A 18.00
AS6323 Assembly of Housing and Bonding Socket 2 1 A 18.00
AS6324 Contact for Bonding Socket 3 1 A 18.00
AS6325 Bush for Bonding Socket 3 1 A 18.00
AS6326 Housing for Bonding Socket 2 1 A 18.00
AS6329 Assembly of Rudder Bar (Single Position Pedal) 2 1 A 18.00
AS6330 Assembly of Rudder Bar (Two Position Pedal) 1 1 A 18.00
AS6331 Rudder Bar Pedestal (Upper) 1 1 A 18.00
AS6332 Special Bolt (Rudder Bar) 1 1 A 18.00
AS6333 Special Nut (Rudder Bar) 1 1 A 18.00
AS6334 Spindle for Rudder Bar 1 1 A 18.00
AS6335-6336 Pivot Bolts (Rudder Bar) 1 1 A 18.00

50
Reference Title Edition Pages Status Price

AS6337-6338 Pedal Pivot Bolt (Rudder Bar) 1 1 A 18.00


AS6339-6340 Assembly of Foot Pedal (Rudder Bar) 1 1 A 18.00
AS6341 Assembly of Rudder Bar Arm 1 1 A 18.00
AS6342 Cap Nut (Rudder Bar) 1 1 A 18.00
AS6343 Taper Bolt (Rudder Bar) 1 1 A 18.00
AS6344 Eye Bolt (Rudder Bar) 1 1 A 18.00
AS6345-6346 Sub-assembly of Two Position Pedal, (Rudder Bar) 1 1 A 18.00
AS6347 Shaft for Pedal Spool - Rudder Bar 2 1 A 18.00
AS6348 Filler Cap Assembly 1 1 A 18.00
AS6349 Filler Cap for AS6348 1 1 A 18.00
AS6350 Pivot Screw (for Filler Cap) 1 1 A 18.00
AS6351 Screw (for Filler Cap) 1 1 A 18.00
AS6352 Captive Nut (for Filler Cap) 2 1 A 18.00
AS6354 Seating for Filler Cap 1 1 A 18.00
AS6357 Filler Cap Assembly (2 DIA.) 1 1 A 18.00
AS6358 Filler Cap (for AS6357) 1 1 A 18.00
AS6359 Insert for Seating (Filler Cap) (used on AS6354) 1 1 A 18.00
AS6360 Assembly - Drain Valve 3 1 I 18.00
AS6361 Body - Drain Valve 4 1 I 18.00
AS6362 Valve - Oil Drain Valve 4 1 A 18.00
AS6363 Guide - Valve 4 1 A 18.00
AS6364 Cap - Valve 4 1 A 18.00
AS6365 Spring Valve (for Flush Drain Valve) 3 1 A 18.00
AS6366 Spring - Cap - Oil Drain Valve 3 1 A 18.00
AS6367 Seal - Valve 3 1 A 18.00
AS6368 Seal - Cap 3 1 A 18.00
AS6369 Seal 3 1 I 18.00
AS6370 Drainage Connection - Drain Valve 3 1 A 18.00
AS6371 Adaptor - Cap Lifter 2 1 A 18.00
AS6372 Nut - Union (for Drainage Connection) 2 1 A 18.00
AS6373 Assembly of Valve Lifter - Adaptor 2 1 A 18.00
AS6374 Adaptor - Hose 2 1 A 18.00
AS6375 Segment - Valve Lifter 2 1 A 18.00
AS6376 Pipe Clamp - Self Bonding (Typical Assembly) 2 1 I 18.00
AS6377 Pipe Clamp, Stud 2 1 I 18.00
AS6378 Pipe Clamp - Self Bonding (Typical Assembly) 2 1 I 18.00
AS6379 Pipe Clamp, Stud 2 1 I 18.00
AS6380 Control - Single Lever - for Anti-Spin Parachutes 1 1 A 18.00
AS6381 Plunger Assembly 1 1 A 18.00
AS6382 Housing for Plunger Assembly 1 1 A 18.00
AS6383 Grub Screw for Plunger Assembly 1 1 A 18.00
AS6384 Knob (Airbrake Control) 2 1 A 18.00
AS6385 Knob (Throttle Control) 2 1 A 18.00

51
Reference Title Edition Pages Status Price

AS6386 Knob (Carburettor Hot/Cold Air Control) 2 1 A 18.00


AS6387 Knob (General Purpose) 3 1 A 18.00
AS6388 Knob (Air Shutter Control) 2 1 A 18.00
AS6389 Knob (Flap Control) 2 1 A 18.00
AS6390 Knob (Undercarriage Control) 3 1 A 18.00
AS6391 Knob (Propeller Control) 2 1 A 18.00
AS6392 Knob (Supercharger Control) 2 1 A 18.00
AS6393 Knob (Glider Release Control) 2 1 A 18.00
AS6394 Knob (Arrestor Hook Control) 2 1 A 18.00
AS6395 Fuel Cock Knob (Low Pressure) 1 1 A 18.00
AS6396 Knob (MiNture Control) 2 1 A 18.00
AS6397 Knob (for Cockpit Heating Control) 2 1 A 18.00
AS6398 Screw for Rotating Knob 1 1 A 18.00
AS6399 Screw for Rotating Knob 1 1 A 18.00
AS6400-6519 Assembly of Flush Fitting Door Lock 2 2 A 30.00
AS6520 Main Body - Left Hand (for Flush Fitting Door Lock) 1 1 A 18.00
AS6521 Main Body - Right Hand (for Flush Fitting Door Lock) 1 1 A 18.00
AS6522 Cover Plate Assembly (for Flush Fitting Door Lock) 1 1 A 18.00
AS6523 Outer Handle Assembly - Double Handle Lock 1 1 A 18.00
AS6524 Spindle Assembly - Double Handle Lock 1 1 A 18.00
AS6525 Spindle - Double Handle Lock 1 1 A 18.00
AS6526 Spider Assembly R.H. 1 1 A 18.00
AS6527 Spider 1 1 A 18.00
AS6528 Spider Assembly L.H. 1 1 A 18.00
AS6529 Short Bolt Rod 1 1 A 18.00
AS6530 Long Bolt Rod 1 1 A 18.00
AS6531 Pivot Bolt 1 1 A 18.00
AS6532 Stop Bolt 1 1 A 18.00
AS6533 Stop (used on AS6400-6519) 1 1 A 18.00
AS6534 Push Button - Outer 2 1 A 18.00
AS6535 Special Mushroom Head Screw 1 1 A 18.00
AS6536 Outer Handle Assembly - Single Handle Lock 1 1 A 18.00
AS6537 Spindle Assembly - Single Handle Lock 1 1 A 18.00
AS6538 Spindle - Single Handle Lock 1 1 A 18.00
AS6539 Seal - Press Button 1 1 A 18.00
AS6540 Eye End 1 1 I 18.00
AS6541 Assembly of Filler Cap, MK.11 with Vent 2 1 I 18.00
AS6542 Assembly of Filler Cap, MK.11 without Vent 2 1 I 18.00
AS6543 G.A. Flanged Half for 1 Fueling Coupling (Non-Self Sealing 1 1 A 18.00
Type)
AS6544 Blanking Cap for 1 Fuel Coupling 1 1 A 18.00
AS6545 Locking Flange 1 1 A 18.00
AS6546 Sealing Cap 2 1 A 18.00
AS6547 Bolt 2 1 A 18.00

52
Reference Title Edition Pages Status Price

AS6548 Valve Retainer 1 1 A 18.00


AS6549 Flanged Adaptor 1 1 A 18.00
AS6550 G.A. Flanged Half for 1 Re-Fueling Coupling (Self Sealing 1 1 A 18.00
Type)
AS6551 G.A. Flanged Half for 2 Re-Fueling Coupling (Open Ended 1 1 A 18.00
Type)
AS6552 Blanking Cap for 2 Fuel Coupling 1 1 A 18.00
AS6553 Locking Screw (for Fuel Coupling) 1 1 A 18.00
AS6554 Locking Flange (for Fuel Coupling) 1 1 A 18.00
AS6555 Sealing Cap (for Fuel Coupling) 2 1 A 18.00
AS6556 Valve Retainer 1 1 A 18.00
AS6557 Flanged Adaptor (for Re-Fuelling Coupling) 1 1 A 18.00
AS6558 G.A. Flanged Half for 2 Re-Fueling Coupling (Self Sealing 1 1 A 18.00
Type)
AS6559 Top Cover (for Cover Plate Assembly) (called for on AS6522) 1 1 A 18.00
AS6560-6569 Pilots Control Wheel Assemblies 1 1 A 18.00
AS6570 Pilots Control Wheel Brake Assembly: (Spade Type) 1 1 A 18.00
AS6571 Pilots Control Wheel Brake Assembly: (Horn Type) 1 1 A 18.00
AS6572 Switch Assembly: for Pilots Control Wheel 2 1 A 18.00
AS6573 Switch Assembly: for Pilots Control Wheel 2 1 A 18.00
AS6574 Switch Assembly: for Pilots Control Wheel 1 1 A 18.00
AS6575 Switch Assembly: for Pilots Control Wheel 1 1 A 18.00
AS6576 Switch Assembly: for Pilots Control Wheel 1 1 A 18.00
AS6577 Switch Assembly: for Pilots Control Wheel 1 1 A 18.00
AS6578 End Piece for Pilots Control Wheel 2 1 I 18.00
AS6579 Pilot's Control Wheel 1 1 A 18.00
AS6580 Brake Off Stop - Pilots Control Wheel 2 1 A 18.00
AS6581 Brake On Stop - Pilots Control Wheel 2 1 A 18.00
AS6582 Brake Lock Adjuster for Pilots Control Wheel 1 1 A 18.00
AS6583 Brake Lock Shaft - Pilots Control Wheel 1 1 A 18.00
AS6584-6585 Adjusting Brake Screw Stop 1 1 A 18.00
AS6586 Locking Ring for Brake Stop for Pilots Control Wheel 1 1 A 18.00
AS6587-6588 Main Switch Body - Pilots Control Wheel 2 1 I 18.00
AS6589 Switch Body Assembly for Pilots Control Wheel 1 1 A 18.00
AS6590 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS6591 Switch Lever: Auto Pilot Switch - Pilots Control Wheel 1 1 A 18.00
AS6592 Switch Lever Spigot for Pilots Control Wheel 2 1 A 18.00
AS6593 Switch Contact Screw for Pilots Control Wheel 1 1 A 18.00
AS6594 Switch Lever Pivot for Pilots Control Wheel 1 1 A 18.00
AS6595 Switch Body Assembly: Pilots Control Wheel 1 1 A 18.00
AS6596 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS6597 Switch Lever - Auto Pilot Switch - Pilots Control Wheel 1 1 A 18.00
AS6598 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS6599 Switch Body - Pilots Control Wheel 2 1 I 18.00
AS6600 Switch Body - Pilots Control Wheel 2 1 I 18.00

53
Reference Title Edition Pages Status Price

AS6601 Switch Body - Pilots Control Wheel 2 1 I 18.00


AS6602 Spindle for Brake Lock 2 1 A 18.00
AS6603 Push Button Cover Assembly 1 1 A 18.00
AS6604 Assembly showing Switch Fixing 1 1 A 18.00
AS6605 Float Operated Cut-Off Valve 1 1 A 18.00
AS6606 Adaptor (Drop Tanks) 1 1 A 18.00
AS6607 Set Screw (for Cut-Off Valve) 1 1 A 18.00
AS6608 Brass Nut, 4 U.N.C. 1 1 A 18.00
AS6609-6610 Hand Nut 1 1 A 18.00
AS6611 Assembly of Pitot Drain 2 1 A 18.00
AS6612 Sub-assembly of Pitot Drain 1 1 A 18.00
AS6613 Cup (for Pitot Drain) 2 1 A 18.00
AS6614 Base (for Pitot Drain) 2 1 A 18.00
AS6615 Special Bolt (for Pitot Drain) 2 1 A 18.00
AS6616 Anchor Clip (for Pitot Drain) 2 1 A 18.00
AS6617 Flush Water/Sediment Drain Valve 1 1 A 18.00
AS6618 Body Assembly (for AS6617) 1 1 A 18.00
AS6619 Valve (for AS6617) 1 1 A 18.00
AS6631 Cover, Inspection (Typical Assembly) 1 1 A 18.00
AS6632-6646 Ring, Tapped, Inner 1 1 A 18.00
AS6647-6661 Ring (Bolt) 1 1 A 18.00
AS6662-6666 Bolt for Inner Ring 1 1 A 18.00
AS6667-6671 Stud (Alternative to Bolt for Inner Ring) 1 1 A 18.00
AS6672 Assembly - Drain Plug 1 1 A 18.00
AS6673 Plug - Drain Plug 2 1 A 18.00
AS6674 Seating - Drain Plug 1 1 A 18.00
AS6680-6685 Trunnion - Trap Straps 1 1 A 18.00
AS6686 Clamping Screw - No. 10 UNF Tank Straps 1 1 A 18.00
AS6687 Pipe Coupling, Outer Sleeve, U.N.F. 6 1 A 18.00
7
AS6688 Pipe Coupling, Outer Sleeve, /16 U.N.F. 7 1 A 18.00
AS6689 Cone Cap for U.N.F. Sleeve 3 1 A 18.00
7
AS6690 Cone Cap for /16 U.N.F. Sleeve 3 1 A 18.00
AS6691 Pipe Couplings (Aluminium Alloy) Cone Union Adaptor/Unified 8 2 A 30.00
Attachment End, 3/16 to - for use with Parallel Gaskets (e.g.
Bonded Seal)
AS6692 Pipe Couplings (Aluminium Alloy) Union Adaptor/Unified 3/16 to 9 5 A 60.00
1, 3/16 to , to 1, 1 to 2, for use with Parallel Gaskets (e.g.
Bonded Seals)
AS6693 Pipe Couplings (Aluminium Alloy) Cone Union Adaptor/Unified 8 2 A 30.00
Attachment End, 3/16 to - for use with O Ring Gaskets (in
American) (& 10050) or equivalent AGS3018 Tapped Bosses
AS6694 Pipe Couplings (Aluminium Alloy) Union Adaptor/Unified 9 5 A 60.00
Attachment End, 3/16 to 1, 3/16 to , to 1, 1 to 2 - for use
with O Ring Gaskets (in American) (& 10050) or equivalent
AGS3018 Tapped Bosses
AS6695 Wire Thread Inserts (UNF) Unplated 5 1 I 18.00
AS6696 Wire Thread Inserts (UNC) Unplated 5 1 I 18.00

54
Reference Title Edition Pages Status Price

AS6698 Seal (Drain Valve) 1 1 A 18.00


AS6699 Cap - Valve (Drain Valve) 1 1 A 18.00
AS6700 Assembly - Drain Valve 1 1 A 18.00
AS6701 Body - Drain Valve 2 1 A 18.00
AS6702 Bonding Clip Assembly (Brass Strap) 3 1 A 18.00
AS6703 Bonding Clip Assembly (Non-Corrodible Steel Strap) 3 1 A 18.00
AS6704 Strap (used on AS6702) 2 1 A 18.00
AS6705 Strap (used on AS6703) 2 1 A 18.00
AS6706 Saddle (Plain) - (for Bonding Clip Assembly) 3 1 A 18.00
AS6706-AR AS6706 Amendment Record 3 1 A 18.00
AS6707 Saddle (Tapped) - (for Bonding Clip Assembly) 3 1 A 18.00
AS6707-AR AS6707 Amendment Record 3 1 A 18.00
m
AS6709 Typical Assemblies of Alum Alloy Low Pressure Union for 3 1 A 18.00
DIA. Tubing
AS6710 Straight Union Body 4 1 A 18.00
AS6711 Tee Union Body 4 1 A 18.00
AS6712 Elbow Union Body 4 1 A 18.00
AS6713 Union Nut (for Typical Assembly see AS6709) 4 1 I 18.00
AS6714 Bush (for Typical Assembly see AS6709) 2 1 I 18.00
AS6715 Adaptor Union Body 3 1 A 18.00
AS6716 Unified Transportation Plugs 1 1 A 18.00
AS6717 Round Jointing Washers, Fibre, to suit Unified Plugs 2 1 A 18.00
AS6720 Pipe Couplings - Arrangement of Cone Banjos 1 7 A 60.00
m
AS6721 Pipe Couplings (Unified Adaptor), Alum Alloy Banjo Bolt 4 2 A 30.00
AS6722 Pipe Couplings (Unified Adaptor), Banjo Bolt - Steel 3 2 A 30.00
AS6723 Pipe Couplings (Unified Adaptor), Alumm Alloy Banjo Bolt with 5 2 A 30.00
Cone Head Connection
AS6724 Pipe Couplings (Unified Adaptor), Steel Banjo Bolt with with Cone 3 2 A 30.00
Head Connection
AS6725 Pipe Couplings (Unified Adaptor), Alumm Alloy Banjo Bolt with 5 2 A 30.00
Union Head Connection
AS6726 Pipe Couplings (Unified Adaptor), Steel Banjo Bolt with Union 4 2 A 30.00
Head Connection
AS6727 Single End Cone Banjo Body (3/16 to ) for use with Banjo Bolts 6 2 A 30.00
AS 6721-6726
AS6728 Double End Cone Banjo Body (3/16 to ) for use with Banjo Bolts 5 2 A 30.00
AS 6721-6726
AS6729 Double R.A. Cone Banjo Body (3/16 to ) for use with Banjo Bolts 5 2 A 30.00
AS 6721-6726
AS6730 Single End Union Banjo Body (3/16 to 1) for use with Banjo Bolts 6 2 A 30.00
AS 6721-6726
AS6731 Double End Union Banjo Body (3/16 to 1) for use with Banjo Bolts 5 2 A 30.00
AS 6721-6726
AS6732 Double R.A. Union Banjo Body (3/16 to 1) for use with Banjo Bolts 5 2 A 30.00
AS 6721-6726
AS6733 Wire Thread Inserts (UN.F.) - Unplated 5 1 A 18.00
AS6734 Wire Thread Inserts (UN.C.) - Unplated 6 1 A 18.00
AS6735 Single Anchor Bolt (Unified) 2 1 A 18.00

55
Reference Title Edition Pages Status Price

AS6736 Double Anchor Bolt (Unified) 2 1 A 18.00


AS6737 Bolts, Weldable (Unified) 4 1 A 18.00
AS6738 Plate for Single Anchor Bolt (Unified) 1 1 A 18.00
AS6739 Plate for Double Anchor Bolt (Unified) 1 1 A 18.00
AS6742 Assembly of Filler Cap MK.II with Vent 2 1 A 18.00
AS6743 Assembly of Filler Cap MK.II without Vent 2 1 A 18.00
AS6744 Filler Cap Base with Vent 2 1 A 18.00
AS6745 Filler Cap Base without Vent 1 1 A 18.00
AS6746 Lid Assembly - Flush Filler Cap MK.II 1 1 A 18.00
AS6747 Filler Cap 1 1 A 18.00
AS6748 Filler Cap Lever 2 1 A 18.00
AS6749 Axis Pin for Catch (Flush Filler Cap) 1 1 A 18.00
AS6750 Grub Screw (for Filler Cap) 2 1 A 18.00
AS6752 Typical Assembly of Retained Bolts - Double Anchor Nuts 1 2 A 30.00
AS6753 Packing Plate for Steel Retaining Rings - Double Anchor Nuts 1 1 A 18.00
AS6754 Packing Plate for Nylon Retaining Rings - Double Anchor Nuts 1 1 A 18.00
AS6755 Packing Plate for Steel Retaining Rings - Single Anchor Nuts 1 1 A 18.00
AS6756 Packing Plate for Nylon Retaining Rings - Single Anchor Nuts 1 1 A 18.00
AS6758 Pipe Couplings (Unified Adaptor) Steel Banjo Bolt with Hole for 2 2 A 30.00
Bleeder Screw
AS6759 Pipe Couplings (Unified Adaptor) Alumm Alloy Banjo Bolt with Hole 4 2 A 30.00
for Bleeder screw
AS6760-6804 Bolt, No.10-32 Nominal Thread Size (.190 DIA) Small Round 3 1 I 18.00
Head - (S.106)
AS6850-6894 Bolt, No.10-32 Nominal Thread Size (.190 DIA) Large Round 3 1 I 18.00
Head - (S.106)
AS6895-6939 Bolt, .250 Nominal DIA. Unified Thread, Small Round Head - 3 1 I 18.00
(S.106)
AS6985-7032 Bolt, .250 Nominal DIA. Unified Thread, Large Round Head - 3 1 I 18.00
(S.106)
AS7033-7077 Bolt, .3125 Nominal DIA. Unified Thread, Small Round Head - 3 1 I 18.00
(S.106)
AS7123-7170 Bolt, .3125 Nominal DIA. Unified Thread, Large Round Head - 3 1 I 18.00
(S.106)
AS7171-7215 Bolt, .375 Nominal DIA. Unified Thread, Small Round Head - 3 1 I 18.00
(S.106)
AS7264-7308 Bolt, .375 Nominal DIA. Unified Thread, Large Round Head - 3 1 I 18.00
(S.106)
AS7310-7345 B.S.1. Chain (8mm Pitch) and Fittings Assembly Code 4 1 A 18.00
AS7346-7381 B.S.2 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7382-7417 B.S.4 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7418-7472 B.S.6 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7473-7493 B.S.1 Chain (8mm Pitch) and Fittings Assembly Code 4 1 A 18.00
AS7494-7529 B.S.2 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7530-7565 B.S.4 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7566-7620 B.S.6 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7621-7641 B.S.1 Chain (8mm Pitch) and Fittings Assembly Code 4 1 A 18.00

56
Reference Title Edition Pages Status Price

AS7642-7677 B.S.2 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00


AS7678-7713 B.S.4 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7714-7768 B.S.6 Chain ( Pitch) and Fittings Assembly Code 3 1 A 18.00
AS7769 Assembly of Chain to Connector 2 1 A 18.00
AS7770-7777 Connector. Chain, Internal Thread 2 1 A 18.00
AS7778 Assembly of Chain to Connector, No. 8 UNC 2 1 A 18.00
AS7779-7780 Connector 6 UNC (8mm Chain) 2 1 I 18.00
AS7781-7836 B.S.1 Chain (8mm Pitch) & Fittings Assembly Code, Non- 4 1 A 18.00
Reversible Control
AS7837-7884 B.S.2 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS7885-7932 B.S.4 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS7933-8014 B.S.6 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS8015-8044 B.S.1 Chain (8mm Pitch) & Fittings Assembly Code, Non- 4 1 A 18.00
Reversible Control
AS8045-8092 B.S.2 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS8093-8140 B.S.4 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS8141-8222 B.S.6 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS8223-8252 B.S.1 Chain (8mm Pitch) & Fittings Assembly Code, Non- 4 1 A 18.00
Reversible Control
AS8253-8300 B.S.2 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS8301-8348 B.S.4 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS8349-8430 B.S.6 Chain ( Pitch) and Fittings Assembly Code, Non- 3 1 A 18.00
Reversible Control
AS8431 Packing Plates - Plain for use with B.S. A.125-201 - Double 1 1 A 18.00
Anchor Stiffnuts
AS8432 Packing Plates - Plain for use with B.S. A.125-201 - Single Anchor 1 1 A 18.00
Stiffnuts
AS8433 Bore Sediment Drain Valve, Unified 1 1 A 18.00
AS8434 Body - Bore Drain Valve 1 1 A 18.00
AS8435 Cap - Bore Drain Valve 1 1 A 18.00
AS8436 Seal - Bore Drain Valve 1 1 A 18.00
AS8437 Clip. Chain - Bore Drain Valve 1 1 A 18.00
AS8451 Wire Thread Inserts (U.N.F), Cadmium Plated 6 1 I 18.00
AS8452 Wire Thread Inserts (U.N.C), Cadmium Plated 6 1 I 18.00
AS8453 Wire Thread Inserts (U.N.F), Cadmium Plated 5 1 I 18.00
AS8454 Wire Thread Inserts (U.N.C), Cadmium Plated 5 1 I 18.00
AS8455 Wire Thread Inserts (U.N.F), Cadmium Plated 5 1 A 18.00
AS8456 Wire Thread Inserts (U.N.C), Cadmium Plated 6 1 A 18.00
AS8457-8482 B.S.1 Chain (8mm Pitch) and 8 U.N.C. Fittings Assembly Code 3 1 A 18.00
AS8483-8493 B.S.1 Chain (8mm Pitch) and 8 U.N.C. Fittings Assembly Code 3 1 A 18.00
AS8494-8504 B.S.1 Chain (8mm Pitch) and 8 U.N.C. Fittings Assembly Code 3 1 A 18.00

57
Reference Title Edition Pages Status Price

AS8505-8506 Connector Chain Internal Thread (8 U.N.C.) 2 1 A 18.00


AS8507-8508 Connector 8 U.N.C. (8 mm Chain) 1 1 A 18.00
AS8509-8552 B.S.1 Chain (8mm Pitch) and 8 UNC Fittings Assembly Code 3 1 A 18.00
Non-Reversible Control
AS8553-8570 B.S.1 Chain (8mm Pitch) and 8 UNC Fittings Assembly Code 3 1 A 18.00
Non-Reversible Control
AS8571-8588 B.S.1 Chain (8mm Pitch) and 8 UNC Fittings Assembly Code 3 1 A 18.00
Non-Reversible Control
AS8589 Pipe Couplings (Steel), Cone Union Adaptor/Unified Attachment 4 2 A 30.00
End 3/16 to , for use with Parallel Gaskets (e.g. Bonded Seals)
AS8590 Pipe Couplings (Steel), Union Adaptor/Unified Attachment End 4 4 A 55.00
3
/16 to & to 1, for use with Parallel Gaskets (eg. Bonded
Seals)
AS8591 Pipe Couplings (Steel), Cone Union Adaptor/Unified Attachment 4 2 A 30.00
End 3/16 to , for use with O Ring Gaskets in American (and
10050) or equivalent AGS3018 Tapped Bosses
AS8592 Pipe Couplings (Steel), Union Adaptor/Unified Attachment End 4 4 A 55.00
3
/16 to & to 1, for use with O Ring Gaskets in American
(and 10050) or equivalent AGS3018 Tapped Bosses
AS8595 Drain Trap 3 1 A 18.00
AS8596 Washer (for typical Assembly, see AS6709) 1 1 A 18.00
AS8597 Assembly of Pitot Drain, for use with dia. Tubing 2 1 A 18.00
AS8598 Sub-Assembly of Pitot Drain, for use with dia. Tubing 1 1 A 18.00
AS8600 Self-Locking Nuts, Hexagon, Flange Type, Steel, Cadmium Plated 4 1 A 18.00
160,000lbs/sq.in 250C
AS8601 Stiffnuts - Hexagon (Standard Hexagon) 3 1 I 18.00
AS8602 Self-Locking Nuts, Double Lug Anchor, Steel, Cadmium Plated 4 1 A 18.00
125,000lbs/sq.in 250C
AS8603 Self-Locking Nuts, Miniature Double Lug Anchor, Steel, Cadmium 4 1 A 18.00
Plated, 125,000lbs/sq.in 250C
AS8604 Self-Locking Nuts, Single, Long Lug Anchor, Steel, Cadmium 4 1 A 18.00
Plated, 125,000lbs/sq.in 250C
AS8605 Self-Locking Nuts, Miniature, Single, Long Lug Anchor, Steel, 4 1 A 18.00
Cadmium Plated, 125,000lbs/sq.in 250C
AS8606 Self-Locking Nuts, Miniature, Single, Short Lug Anchor, Steel, 4 1 A 18.00
Cadmium Plated, 125,000lbs/sq.in 250C
AS8607 Self-Locking Nuts, Corner Anchor, Steel, Cadmium Plated, 4 1 A 18.00
125,000lbs/sq.in 250C
AS8608 Self-Locking Nuts, Miniature Corner Anchor, Steel, Cadmium 4 1 A 18.00
Plated, 125,000lbs/sq.in 250C

AS8609 Self-Locking Nuts, Double Lug Floating Anchor, Steel, Cadmium 4 1 A 18.00
Plated, 125,000lbs/sq.in 250C
AS8610 Self-Locking Nuts, Miniature, Double Lug Floating Anchor, Steel, 5 1 I 18.00
Cadmium Plated, 125,000lbs/sq.in. 250C
AS8611 Self-Locking Nuts, Single Long Lug Floating Anchor, Steel, 4 1 A 18.00
Cadmium Plated, 125,000lbs/sq.in 250C
AS8612 Self-Locking Nuts, Strip Steel, Cadmium Plated, 125,000 5 1 A 18.00
lbs/sq.in. 250C
AS8623 Self-Locking Nuts, Hexagon, Flange Type, C.R. Steel, Silver 2 1 A 18.00
Plated, 125,000lbf/in2 450C
AS8624 Stiffnuts Hexagon (Standard Hexagon) 2 1 I 18.00
AS8625 Self-Locking Nuts, Double Lug Anchor, C.R. Steel, Silver, Silver 2 1 A 18.00

58
Reference Title Edition Pages Status Price

Plated, 125,000lbf/in2 450C


AS8626 Self-Locking Nuts, Miniature Double Lug Anchor, C.R. Steel, 2 1 A 18.00
Silver Plated, 125,000lbf/in2 450C
AS8627 Self-Locking Nuts, Single, Long Lug Anchor, C.R. Steel, Silver 2 1 A 18.00
Plated, 125,000lbf/in2 450C
AS8628 Self-Locking Nuts, Miniature, Single, Long Lug Anchor, C.R. 2 1 A 18.00
Steel, Silver Plated, 125,000lbf/in2 450C
AS8629 Self-Locking Nuts, Miniature, Single, Short Lug Anchor, C.R. 2 1 A 18.00
Steel, Silver Plated, 125,000lbf/in2 450C
AS8630 Self-Locking Nuts, Corner Anchor, C.R. Steel, Silver Plated, 2 1 A 18.00
125,000lbf/in2 450C
AS8631 Self-Locking Nuts, Miniature Corner Anchor, C.R. Steel, Silver 2 1 A 18.00
Plated, 125,000lbf/in2 450C
AS8632 Self-Locking Nuts, Double Lug Floating Anchor, C.R. Steel, Silver 2 1 A 18.00
Plated, 125,000lbf/in2 450C
AS8633 Self-Locking Nuts, Miniature, Double Lug Floating Anchor, C.R. 3 1 I 18.00
Steel, Silver Plated, 125,000lbf/in2 450C
AS8634 Self-Locking Nuts, Single Lug Floating Anchor, C.R. Steel, Silver 2 1 A 18.00
Plated, 125,000lbf/in2 450C
AS8646 Channel (used on AS4580/4581) 1 1 A 18.00
AS8650 Self-Locking Nuts, Hexagon, Flange Type, C.R. Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8651 Stiffnuts - Hexagon (Standard Hexagon) 2 1 I 18.00
2
AS8652 Self-Locking Nuts, Double Lug Anchor, CR Steel, 125,000lbf/in 4 1 A 18.00
250C
AS8653 Self-Locking Nuts, Miniature Double Lug Anchor, CR Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8654 Self-Locking Nuts, Single, Long Lug Anchor, CR Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8655 Self-Locking Nuts, Miniature Single, Long Lug Anchor, CR Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8656 Self-Locking Nuts, Miniature Single, Short Lug Anchor, CR Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8657 Self-Locking Nuts, Corner Anchor, CR Steel, 125,000lbf/in2 250C 4 1 A 18.00
AS8658 Self-Locking Nuts, Miniature Corner Anchor, CR Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8659 Self-Locking Nuts, Double Lug Floating Anchor, CR Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8660 Self-Locking Nuts, Miniature, Double Lug Floating Anchor, CR 5 1 I 18.00
Steel, 125,000lbf/in2 250C
AS8661 Self-Locking Nuts, Single, Long, Lug Floating Anchor, CR Steel, 4 1 A 18.00
125,000lbf/in2 250C
AS8662 Pitot & Static Manifold Connection Assembly 1 1 A 18.00
AS8663 Connection, Pitot (used on AS8662) 3 1 A 18.00
AS8664 Connection, Static (used on AS8662) 3 1 A 18.00
AS8665 Bracket, for Manifold Connection (AS8662) 1 1 A 18.00
AS8666 Ballast Weight 5lb 1 1 A 18.00
AS8671 Capping (Cable Duct), 1.28 Wide, Fire Resistant 4 1 A 18.00
AS8672 Capping (Cable Duct), 1.09 Wide, Fire Resistant 3 1 A 18.00
AS8673 Capping (Cable Duct), .88 Wide, Fire Resistant 3 1 A 18.00
AS8674 Capping (Cable Duct), .72 Wide, Fire Resistant 3 1 A 18.00

59
Reference Title Edition Pages Status Price

AS8679 Arrangement of Banjo Fittings, Pitot Static Systems 2 1 A 18.00


AS8680 Banjo Bolt, Pitot. Pitot Static System 1 1 A 18.00
AS8681 Banjo Body, Static. Pitot Static System 2 1 A 18.00
AS8682 Banjo Bolt, Pitot. Pitot Static System 1 1 A 18.00
AS8683 Banjo Bolt, Static. Pitot Static System 1 1 A 18.00
AS8690-8699 Washer, Cup, Lock 3 1 I 18.00
AS10700 Pipe Couplings, Adaptor Nipple 1 2 A 30.00
AS10701 Pipe Couplings, Nipple 1 2 A 30.00
AS12800 Ring, Sealing, Toroidal, DTD5603 Grade E (S Control Drawing) 7 1 I 18.00
AS12800-AR AS12800 Amendment Record 7 1 I 18.00
AS12801 Ring, Sealing, Toroidal, DTD5603 Grade E (S Control Drawing) 7 6 I 60.00
AS12801-AR AS12801 Amendment Record 7 1 I 18.00
AS12810-839 Clip, Spring, Tension, Inner 4 3 A 45.00
AS12810-AR Amendment Record for Standard AS12810 4 1 A 18.00
AS12840-869 Clip, Spring, Tension, Outer 4 3 A 45.00
AS12840-AR Amendment Record for Standard AS12840 4 3 A 45.00
AS12870-889 Bushing. Plastics 4 1 A 18.00
AS12890-939 Bushing. Plastics 4 1 A 18.00
AS12940-959 Washer, Flat, Countersunk 2 1 A 18.00
AS12980-984 Retainer, Nut & Bolt, with Rivet Holes 5 2 A 30.00
AS12980-AR AS12980 Amendment Record 5 2 A 30.00
AS12985-989 Retainer, Nut & Bolt, without Rivet Holes 1 1 A 18.00
AS13000-099 Bolt, Machine, Double Hexagon Extended Washer Head 4 1 I 18.00
DTD5066, .187-32 UNS. 3A
AS13100-199 Bolt, Machine, Double Hexagon Extended Washer Head 5 1 I 18.00
DTD5066, .187-32 UNS. 3A
AS13200-299 Bolt, Machine, Double Hexagon Extended Washer Head 4 1 I 18.00
DTD5066, .187-32 UNS. 3A
AS13300-399 Bolt, Machine, Double Hexagon Extended Washer Head 4 1 I 18.00
DTD5066, .187-32 UNS. 3A
AS13400-499 Bolt, Machine, Double Hexagon Extended Washer Head HR650, 4 1 I 18.00
.187-32 UNS. 3A
AS13500-599 Bolt, Machine, Double Hexagon Extended Washer Head HR650, 4 1 I 18.00
.247-28 UNS. 3A
AS13600-699 Bolt, Machine, Double Hexagon Extended Washer Head HR650, 4 1 I 18.00
.3095-24 UNS. 3A
AS13700-799 Bolt, Machine, Double Hexagon Extended Washer Head HR650, 4 1 I 18.00
.372-24 UNS. 3A
AS13800-899 Bolt, Machine, Double Hexagon Extended Washer Head HR601, 4 1 I 18.00
.187-32 UNS. 3A (superceded by AS21900-AS21999)
AS13900-999 Bolt, Machine, Double Hexagon Extended Washer Head HR601, 4 1 I 18.00
.247-28 UNS. 3A (superceded by AS22000-AS22099)
AS14000-099 Bolt, Machine, Double Hexagon Extended Washer Head HR601, 4 1 I 18.00
.3095-24 UNS. 3A
AS14100-199 Bolt, Machine, Double Hexagon Extended Washer Head HR601, 4 1 I 18.00
.372-24 UNS. 3A
AS14500-599 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 I 18.00
Washer Head, DTD5066, .187-32 UNS-3A
AS14600-699 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 I 18.00

60
Reference Title Edition Pages Status Price

Washer Head, DTD5066, .247-28 UNS-3A


AS14700-799 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 I 18.00
Washer Head, DTD5066, .3095-24 UNS-3A
AS14800-899 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 I 18.00
Washer Head, DTD 5066, .372-24 UNS-3A
AS14900-999 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR650, .187-32 UNS-3A
AS15000-099 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR650, .247-28 UNS-3A
AS15100-199 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR650, .3095-24 UNS-3A
AS15200-299 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR650, .372-24 UNS-3A
AS15300-399 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR601, .187-32 UNS-3A
AS15400-499 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR601, .247-28 UNS-3A
AS15500-599 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR601, .3095-24 UNS-3A
AS15600-699 Bolt, Externally Relieved Body - Double Hexagon Extended, 4 1 I 18.00
Washer Head, HR601, .372-24 UNS
AS15700-711 Nut, Union - Tube and Hose Coupling 8 2 A 30.00
AS15720-743 Ferrule, Welding, Pipe Fitting (for Inch Pipes) 4 3 A 45.00
AS15760-761 Bushing (for use with Ferrule Welding Pipe Fitting) 4 1 A 18.00
AS15766-769 Ferrule, Welding, Pipe Fitting - Assembly 3 1 A 18.00
AS15776-787 Wire, Thrust -Tube and Hose Coupling Nut 5 1 A 18.00
3
AS15800-823 Adaptor, Union, Pipe, for use with /16 to 1 O/DIA. 22 SWG 6 1 A 18.00
(.028) and 20 SWG (.036) T.55 Tubes
AS15824-835 Nut Assembly, Pipe Closure 1 1 A 18.00
AS15836-847 Ferrule, Blank 3 1 A 18.00
AS16000-199 Rivet, Solid, Universal Head, DTD5036, (Corrosion & Heat 2 1 A 18.00
Resistant Steel)
AS16200-399 Rivet, Solid, Universal Head, BS HR 504 (Heat Resistant Alloy) 2 1 A 18.00
AS16400-599 Rivet, Solid, 100 Countersunk Head, DTD5036, (Corrosion & 2 1 A 18.00
Heat Resistant Steel)
AS16600-799 Rivet, Solid, 100 Countersunk Head, BS HR 504 (Heat Resistant 2 1 A 18.00
Alloy)
AS17000-099 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, DTD5066, .187-32 UNS-3A
AS17100-199 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, DTD5066, .247-28 UNS-3A
AS17200-299 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, DTD5066, .3095-24 UNS-3A
AS17300-399 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, DTD5066, .372-24 UNS-3A
AS17400-499 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, HR650, .187-32 UNS-3A
AS17500-599 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, HR650, .247-28 UNS-3A
AS17600-699 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, HR650, .3095-24 UNS-3A
AS17700-799 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, HR650, .372-24 UNS-3A

61
Reference Title Edition Pages Status Price

AS17800-899 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00


Cupwasher Locked, HR601, .187-32 UNS-3A
AS17900-999 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, HR601, .247-28 UNS-3A
AS18000-099 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, HR601, .3095-24 UNS-3A
AS18100-199 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00
Cupwasher Locked, HR601, .372-24 UNS-3A
AS18200-299 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, DTD5066, .187-32 UNS-3A
AS18300-399 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, DTD5066, .247-28 UNS-3A
AS18400-499 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, DTD5066, .3095-24 UNS-3A
AS18500-599 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, DTD5066, .372-24 UNS-3A
AS18600-699 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, HR650, .187-32 UNS-3A
AS18700-799 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, HR650, .247-28 UNS-3A
AS18800-899 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, HR650, .3095-24 UNS-3A
AS18900-999 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, HR650, .372-24 UNS-3A
AS19000-099 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, HR601, .187-32 UNS-3A
AS19100-199 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00
Washer Head, Cupwasher Locked, HR601, .247-28 UNS-3A

AS19200-299 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00


Washer Head, Cupwasher Locked, HR601, .3095-24 UNS-3A

AS19300-399 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00


Washer Head, Cupwasher Locked, HR601, .372-24 UNS-3A

AS19400-499 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
DTD5066, .187-32 UNS-3A

AS19500-599 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
DTD5066, .247-28 UNS-3A

AS19600-699 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
DTD5066, .3095-24 UNS-3A

AS19700-799 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
DTD5066, .372-24 UNS-3A

AS19800-899 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR650, .187-32 UNS-3A

AS19900-999 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR650, .247-28 UNS-3A

AS20000-099 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR650, .3095-24 UNS-3A

AS20100-199 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR650, .372-24 UNS-3A

AS20200-299 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR601, .187-32 UNS-3A

62
Reference Title Edition Pages Status Price

AS20300-399 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR601, .247-28 UNS-3A (superceded by AS23500-23599)

AS20400-499 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR601, .3095-24 UNS-3A

AS20500-599 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 I 18.00
HR601, .372-24 UNS-3A

AS20620-639 Nut, Self-Locking, Extended Washer, Double Hexagon 9 2 A 30.00

AS20640-739 Pin, Straight, Headless 5 1 A 18.00

AS20740-759 Pin, Grooved, Headless 3 1 A 18.00

AS20760-766 Ring, Retaining 2 1 A 18.00

AS20800-899 Bolt, Machine, Double Hexagon Extended Washer Head, 4 1 I 18.00


BS.S159, .164-36 UNJF-3A-BS.4084

AS20900-999 Bolt, Machine, Double Hexagon Extended Washer Head, 4 1 A 18.00


BS.S159, .190-32 UNJF-3A-BS.4084

AS21000-099 Bolt, Machine, Double Hexagon Extended Washer Head, 4 1 A 18.00


BS.S159, .250-28 UNJF-3A-BS.4084

AS21100-199 Bolt, Machine, Double Hexagon Extended Washer Head, 4 1 A 18.00


BS.S159, .3125-24 UNJF-3A-BS.4084

AS21200-299 Bolt, Machine, Double Hexagon Extended Washer Head, 4 1 A 18.00


BS.S159, .375-24 UNJF-3A-BS.4084

AS21300-399 Bolt, Machine, Double Hexagon Extended Washer Head, 8 (.164)- 5 1 I 18.00
36 UNJF-3A-BS.4084

AS21400-499 Bolt, Machine, Double Hexagon Extended Washer Head, 190-32 4 1 A 18.00
UNJF-3A-BS.4084

AS21500-599 Bolt, Machine, Double Hexagon Extended Washer Head, 250-28 4 1 A 18.00
UNJF-3A-BS.4084

AS21600-699 Bolt, Machine, Double Hexagon Extended Washer Head, 3125-24 4 1 A 18.00
UNJF-3A-BS.4084

AS21700-799 Bolt, Machine, Double Hexagon Extended Washer Head, 375-24 4 1 A 18.00
UNJF-3A-BS.4084

AS21800-899 Bolt, Machine, Double Hexagon Extended Washer Head, 3 1 I 18.00


DTD5077 8(.164)-36 UNJF-3A-BS.4084

AS21900-999 Bolt, Machine, Double Hexagon Extended Washer Head, BS HR 3 1 A 18.00


601, .375-24 UNJF-3A-BS.4084 (superceded AS13800-13899)

AS22000-099 Bolt, Machine, Double Hexagon Extended Washer Head, BS HR 3 1 A 18.00


601, .250-28 UNJF-3A-BS.4084 (superceded AS13900-13900)

AS22100-199 Bolt, Machine, Double Hexagon Extended Washer Head, BS HR 3 1 A 18.00


601, .3125-24 UNJF-3A-BS.4084

AS22200-299 Bolt, Machine, Double Hexagon Extended Washer Head, BS HR 3 1 A 18.00


601, .375-24 UNJF-3A-BS.4084

AS22400-499 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 1 A 18.00
BS S.159, .190-32 UNJF-3A-MOD.BS.4084

AS22500-599 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 1 A 18.00
BS S.159, .250-28 UNJF-3A-MOD.BS.4084

AS22600-699 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 1 A 18.00
BS S.159, .3125-24 UNJF-3A-MOD.BS.4084

63
Reference Title Edition Pages Status Price

AS22700-799 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 1 A 18.00
BS S.159, .375-24 UNJF-3A-MOD.BS.4084

AS22900-999 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 2 A 30.00
BS HR 650, .190-32 UNJF-3A-BS.4084

AS23000-099 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 2 A 30.00
BS HR 650, .250-28 UNJF-3A-BS.4084

AS23100-199 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 2 A 30.00
BS HR 650, .3125-24 UNJF-3A-BS.4084

AS23200-299 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 4 2 A 30.00
BS HR 650, .375-24 UNJF-3A-BS.4084

AS23400-499 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 A 18.00
BS HR 601, 10(.190)-32 UNJF-3A-BS.4084

AS23500-599 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 A 18.00
BS HR 601, .250-28 UNJF-3A-BS.4084 (superceded AS2030-
AS20399)

AS23600-699 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 A 18.00
BS HR 601, .3125-24 UNJF-3A-BS.4084

AS23700-799 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 3 1 A 18.00
BS HR 601, .375-24 UNJF-3A-BS.4084

AS23900-999 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 A 18.00


Washer Head, BS S.159, .190-32 UNJF-3A-BS.4084

AS24000-099 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 A 18.00


Washer Head, BS S.159, 250-28 UNJF-3A-BS.4084

AS24100-199 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 A 18.00


Washer Head, S159, .3125-24 UNJF-3A-BS.4084

AS24200-299 Bolt, Externally Relieved Body - Double Hexagon Extended 4 1 A 18.00


Washer Head, S159, .375-24 UNJF-3A-BS.4084

AS24400-499 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00


Washer Head, DTD 5026, 10(.190) UNJF-3A-BS.4084

AS24500-599 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00


Washer Head, DTD 5026, .250-28 UNJF- 3A BS 4084

AS24600-699 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00


Washer Head, DTD 5026, .3125-24 UNJF- 3A BS 4084

AS24700-799 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 I 18.00


Washer Head, DTD 5026, .375-24 UNJF- 3A BS 4084

AS24900-999 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 A 18.00


Washer Head, BS HR 601, .190-32 UNJF-3A-BS.4084

AS25000-099 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 A 18.00


Washer Head, BS HR601, .250-28 UNJF-3A-BS.4084

AS25100-199 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 A 18.00


Washer Head, BS HR601, .3125-24 UNJF-3A-BS.4084

AS25200-299 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 A 18.00


Washer Head, BS HR601, .375-24 UNJF-3A-BS.4084

AS25300 Ring, Sealing, Toroidal, 65 IRHD, Pipe Fitting, Fluorocarbon 3 2 I 30.00


Rubber

AS25301 Ring, Sealing, Toroidal, 85 IRHD, Pipe Fitting, Fluorocarbon 3 2 I 30.00


Rubber

AS25310 Ring, Sealing, Toroidal, 70 IRHD General Purpose, Fluorocarbon 4 4 I 55.00


Rubber

64
Reference Title Edition Pages Status Price

AS25311 Ring, Sealing, Toroidal, 85 IRHD General Purpose, Fluorocarbon 3 4 I 55.00


Rubber

AS25320 Ring, Sealing, Toroidal, 65 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Acrylonitrile (Mineral Oil Resistant)

AS25321 Ring, Sealing, Toroidal, 75 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Acrylonitrile (Mineral Oil Resistant)

AS25322 Ring, Sealing, Toroidal, 85 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Acrylonitrile (Mineral Oil Resistant)

AS25330 Ring, Sealing, Toroidal, 65 I.R.H., Butadiene Acrylonitrile 2 4 A 55.00


(Mineral Oil Resistant)

AS25331 Ring, Sealing, Toroidal, 75 I.R.H., Butadiene Acrylonitrile 2 4 A 55.00


(Mineral Oil Resistant)

AS25332 Ring, Sealing, Toroidal, 85 I.R.H., Butadiene Acrylonitrile 2 4 A 55.00


(Mineral Oil Resistant)

AS25340 Ring, Sealing, Toroidal, 65 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Acrylonitrile (Fuel & Synthetic Oil Resistant)

AS25341 Ring, Sealing, Toroidal, 75 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Acrylonitrile (Fuel & Synthetic Oil Resistant)

AS25342 Ring, Sealing, Toroidal, 85 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Acrylonitrile (Fuel & Synthetic Oil Resistant)

AS25350 Ring, Sealing, Toroidal, 65 I.R.H. Butadiene Acrylonitrile 2 4 A 60.00


Acrylonitrile (Fuel & Synthetic Oil Resistant)

AS25351 Ring, Sealing, Toroidal, 75 I.R.H. Butadiene Acrylonitrile(Fuel & 2 4 A 55.00


Synthetic Oil Resistant)

AS25352 Ring, Sealing, Toroidal, 85 I.R.H. Butadiene Acrylonitrile(Fuel & 2 4 A 55.00


Synthetic Oil Resistant)

AS25360 Ring, Sealing, Toroidal, 65 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Ethylene

AS25361 Ring, Sealing, Toroidal, 80 I.R.H.D. Pipe Fitting, Butadiene 3 2 A 30.00


Ethylene

AS25362 Ring, Sealing, Toroidal, 85 I.R.H. Pipe Fitting, Butadiene 2 2 A 30.00


Ethylene

AS25370 Ring Sealing Toroidal 65 I.R.H. Ethylene Propylene 2 4 A 55.00

AS25371 Ring, Sealing, Toroidal, 80 I.R.H.D. Butadiene Ethylene 3 4 A 55.00

AS25372 Ring, Sealing, Toroidal, 85 I.R.H. Butadiene Ethylene 2 4 A 55.00

AS25386 Ring, Sealing, Toroidal, 60 I.R.H.D. Pipe Fitting, Fluorosilicone 2 2 A 30.00


Rubber

AS25387 Ring, Sealing, Toroidal, 70 I.R.H.D. Pipe Fitting, Fluorosilicone 2 2 A 30.00


Rubber

AS25396 Ring, Sealing, Toroidal, 60 I.R.H.D. General Purpose, 1 4 A 55.00


Fluorosilicone Rubber

AS25397 Ring, Sealing, Toroidal, 70 I.R.H.D. General Purpose, 1 4 A 55.00


Fluorosilicone Rubber

AS25400 Ring, Sealing, Toroidal, 65 I.R.H. Pipe Fitting, Silicone 2 2 A 30.00

AS25401 Ring, Sealing, Toroidal, 75 I.R.H. Pipe Fitting, Silicone 2 2 A 30.00

AS25402 Ring, Sealing, Toroidal, 85 I.R.H. Pipe Fitting, Silicone 2 2 A 30.00

65
Reference Title Edition Pages Status Price

AS25410 Ring, Sealing, Toroidal, 65 I.R.H. Silicone 2 4 A 55.00

AS25411 Ring, Sealing, Toroidal, 75 I.R.H. Silicone 2 4 A 55.00

AS25412 Ring, Sealing, Toroidal, 85 I.R.H. Silicone 2 4 A 55.00

AS26000-049 Ferrule, Welding, Pipe Fitting (for Metric Pipes) 2 3 A 45.00

AS26070-074 Retainer, Nut & Bolt, with Rivet Holes 4 2 A 30.00

AS26070-AR AS26070 Amendment Record 4 1 A 18.00

AS26080-084 Plate, Washer, Plain 6 2 A 30.00

AS26080-AR AS26080 Amendment Record 6 1 A 18.00

AS26090-099 Washer, Flat Countersunk Dee Shape 2 1 I 18.00

AS26100-199 Bolt, Close Tolerance - Dee Head, BS S159, .190-32 UNJF- 4 1 A 18.00
3A.MOD.BS4084

AS26200-299 Bolt, Close Tolerance - Dee Head, BS S159, .250-28 UNJF- 4 1 A 18.00
3A.MOD.BS4084

AS26300-399 Bolt, Close Tolerance-Dee Head, BS S159, .3125-24 UNJF- 4 1 A 18.00


3A.MOD.BS4084

AS26400-499 Bolt, Close Tolerance-Dee Head, BS S159, .375-24 UNJF- 4 1 A 18.00


3A.MOD.BS4084

AS26500-599 Bolt, Close Tolerance-Dee Head, BS S159, .4375-20 UNJF- 4 1 A 18.00


3A.MOD.BS4084

AS26600-699 Bolt, Close Tolerance-Dee Head, BS S159, .500-20 UNJF- 4 1 A 18.00


3A.MOD.BS4084

AS26700-799 Bolt, Close Tolerance-Dee Head, BS HR601, .190-32 UNJF- 3 1 A 18.00


3A.MOD.BS4084

AS26800-899 Bolt, Close Tolerance-Dee Head, BS HR601, .250-28 UNJF- 3 1 A 18.00


3A.MOD.BS4084

AS26900-999 Bolt, Close Tolerance-Dee Head, BS HR601, .3125-24 UNJF- 3 1 A 18.00


3A.MOD.BS4084

AS27000-099 Bolt, Close Tolerance-Dee Head, BS HR601, .375-24 UNJF- 3 1 A 18.00


3A.MOD.BS4084

AS27100-199 Bolt, Close Tolerance-Dee Head, BS HR601, .4375-20 UNJF- 3 1 A 18.00


3A.MOD.BS4084

AS27200-299 Bolt, Close Tolerance-Dee Head, BS HR601, .500-20 UNJF- 3 1 A 18.00


3A.MOD.BS4084

AS27300-349 Nut, Self-Locking, Shaft 6 2 I 30.00

AS27350-399 Adaptor, Straight, Pipe (for Inch Pipes) 4 3 A 45.00

AS27400-449 Adaptor, Straight, Pipe (for Inch Pipes) 4 3 A 45.00

AS27465-499 Double-Ended Union, Tube 4 1 A 18.00

AS27500-549 Adaptor, Straight, Pipe (for Metric Pipes) 4 3 A 45.00

AS27550-599 Adaptor, Straight, Pipe (for Metric Pipes) 4 3 A 45.00

AS27600-649 Adaptor, Elbow, Pipe (for Inch Pipes) 4 3 A 45.00

66
Reference Title Edition Pages Status Price

AS27650-699 Adaptor, Elbow, Pipe (for Inch Pipes) 7 4 A 55.00

AS27700-749 Adaptor, Elbow, Pipe (for Metric Pipes) 4 3 A 45.00

AS27750-799 Adaptor, Elbow, Pipe (for Metric Pipes) 4 4 A 55.00

AS27820-829 Nut, S/Locking Extended Washer, Double Hexagon-Deep 6 2 A 30.00


Counterbored

AS27830-832 Nut, Self-Locking, Six-Point, Captive Washer (Source Control 2 2 A 30.00


Drawing)

AS27850-899 Nut, Self-Locking, Shank, Flange Restrained 9 3 A 45.00

AS27900-949 Plug, Machine Thread 3 3 A 45.00

AS28000 Nut, S/Locking Non C.R. Steel, Captive Washer, Cadmium 2 1 A 18.00
Coated

AS28001 Nut - 6 Point, Self Aligning 2 1 A 18.00

AS28002 Washer - for use with AS28001 Nuts 1 1 A 18.00

AS28003 Nut, S/Locking Non C.R. Steel, Long Lug Anchor, Cadmium 2 1 A 18.00
Coated

AS28004 Nut, S/Locking, Non C.R. Steel, Double Lug Anchor, Cadmium 2 1 A 18.00
Coated

AS28005 Nut, Self-Locking, Non C.R. Steel, Corner Anchor, Cadmium 2 1 A 18.00
Coated

AS28006 Nut, Self-Locking, Non C.R. Steel, Floating, Long Lug Anchor, 2 1 A 18.00
Cadmium Coated

AS28007 Nut, Self-Locking, Non C.R. Steel, Floating, Double Lug Anchor, 4 1 A 18.00
Cadmium Coated

AS28008 Nut, Anchor, Double Lug, Floating, Self Aligning, Cadmium 2 1 A 18.00
Coated

AS28009 Nut, Self-Locking, Non C.R. Steel, Miniature, Single Long Lug 2 1 A 18.00
Anchor, Cadmium Coated

AS28010 Nut, S/Locking, Miniature, Double Long Lug Anchor, Cadmium 2 1 A 18.00
Coated

AS28013-018 Ferrule, Welding, Pipe Fitting Assembly (for Metric Pipes) 1 1 A 18.00

AS28019 Nut, S/Locking, Non C.R. Steel, Corner Anchor, Miniature, 2 1 A 18.00
Cadmium Coated

AS28100-199 Bolt, Close Tolerance - Large Dee Head, BS.HR650 .190-32 4 2 A 30.00
UNJF-3A.MOD.BS4084

AS28200-299 Bolt, Close Tolerance - Large Dee Head, BS.HR650 .250-28 4 2 A 30.00
UNJF-3A.MOD.BS4084

AS28300-399 Bolt, Close Tolerance - Large Dee Head, BS.HR650 .3125-24 4 2 A 30.00
UNJF-3A.MOD.BS4084

AS28400-499 Bolt, Close Tolerance - Large Dee Head, BS.HR650 .375-24 4 2 A 30.00
UNJF-3A.MOD.BS4084

AS28500-599 Bolt, Close Tolerance - Large Dee Head, BS.HR650 .4375-20 4 2 A 30.00
UNJF-3A.MOD.BS4084

AS28600-699 Bolt, Close Tolerance - Large Dee Head, BS.HR650 .500-20 5 2 A 30.00
UNJF-3A.MOD.BS4084

AS28950-959 P Section. Rubber 1 1 A 18.00

67
Reference Title Edition Pages Status Price

AS29000-099 Bolt, Externally Relieved Body - Dee Head, DTD5066 10(.190)-32 3 1 I 18.00
UNJF - 3A BS4084

AS29100-199 Bolt, Externally Relieved Body - Dee Head, DTD5066, .250-28 3 1 I 18.00
UNJF - 3A BS4084

AS29200-299 Bolt, Externally Relieved Body - Dee Head, BS S159, .3125-24 3 1 I 18.00
UNJF - 3A BS4084

AS29300-399 Bolt, Externally Relieved Body - Dee Head, BS S159, .375-24 3 1 I 18.00
UNJF - 3A BS4084

AS29400-499 Bolt, Externally Relieved Body - Dee Head, BS S159, .4375-20 3 1 I 18.00
UNJF - 3A BS4084

AS29500-599 Bolt, Externally Relieved Body - Dee Head, BS S159, .500-20 3 1 I 18.00
UNJF - 3A BS4084

AS29600-699 Bolt, Externally Relieved Body - Dee Head, DTD5077 10(.190)-32 2 1 I 18.00
UNJF - 3A BS4084

AS29700-799 Bolt, Externally Relieved Body - Dee Head, DTD5077, .250-28 2 1 I 18.00
UNJF - 3A BS4084
AS29800-899 Bolt, Externally Relieved Body - Dee Head, DTD5077, .3125-24 2 1 I 18.00
UNJF - 3A BS4084
AS29900-999 Bolt, Externally Relieved Body - Dee Head, DTD5077, .375-24 2 1 I 18.00
UNJF - 3A BS4084
AS30000-099 Bolt, Externally Relieved Body - Dee Head, DTD5077, .4375-20 2 1 I 18.00
UNJF - 3A BS4084
AS30100-199 Bolt, Externally Relieved Body - Dee Head, DTD5077, .500-20 2 1 I 18.00
UNJF - 3A BS4084
AS30200-299 Bolt, Machine - Double Hexagon Extended Washer Head, BS 3 1 A 18.00
S159, .4375-20 UNJF-3A.BS4084

AS30300-399 Bolt, Machine - Double Hexagon Extended Washer Head, BS 3 1 A 18.00


S159, .500-20 UNJF-3A.BS4084
AS30400-499 Bolt, Machine - Double Hexagon Extended Washer Head, HR650, 3 1 A 18.00
.4375-20 UNJF-3A.BS4084

AS30500-599 Bolt, Machine - Double Hexagon Extended Washer Head, HR650 3 1 A 18.00
.500-20 UNJF-3A.BS4084
AS30600-699 Bolt, Machine - Double Hexagon Extended Washer Head HR601, 2 1 A 18.00
.4375-20 UNJF-3A.BS4084
AS30700-799 Bolt, Machine - Double Hexagon Extended Washer Head, HR601, 2 1 A 18.00
.500-20 UNJF-3A.BS4084
AS30800-899 Bolt, Close Tolerance - Double Hexagon Extended Washer Head. 3 1 A 18.00
BS S159, .4375-29 UNJF-3A.MOD.BS4084
AS30900-999 Bolt, Close Tolerance - Double Hexagon Extended Washer Head. 3 1 A 18.00
BS S159, .500-20 UNJF-3A.MOD.BS4084
AS31000-099 Bolt, Close Tolerance - Double Hexagon Extended Washer Head. 3 2 A 30.00
BS HR650, .4375-20 UNJF-3A.MOD.BS4084
AS31100-199 Bolt, Close Tolerance - Double Hexagon Extended Washer Head 3 2 A 30.00
BS HR650, .500-20 UNJF-3A.MOD.BS4084.
AS31200-299 Bolt, Close Tolerance - Double Hexagon Extended Washer Head. 2 1 A 18.00
BS HR601, .4375-20 UNJF-3A.MOD.BS4084
AS31300-399 Bolt, Close Tolerance - Double Hexagon Extended Washer Head. 2 1 A 18.00
BS HR601, .500-20 UNJF-3A.MOD.BS4084
AS31400-499 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 A 18.00
Washer Head. BS S159, .4375-20 UNJF-3A.MOD.BS4084

68
Reference Title Edition Pages Status Price

AS31500-599 Bolt, Externally Relieved Body - Double Hexagon Extended 3 1 A 18.00


Washer Head. BS S159, .500-20 UNJF-3A.MOD.BS4084
AS31600-699 Bolt, Externally Relieved Body - Double Hexagon Extended 2 1 I 18.00
Washer Head. DTD5026, .4375-20 UNJF-3A BS4084
AS31700-799 Bolt, Externally Relieved Body - Double Hexagon Extended 2 1 I 18.00
Washer Head. DTD5026, .500-20 UNJF-3A BS4084
AS31800-899 Bolt, Externally Relieved Body - Double Hexagon Extended 2 1 A 18.00
Washer Head, BS HR601, .4375-29 UNJF-3A.BS4084
AS31900-999 Bolt, Externally Relieved Body - Double Hexagon Extended 2 1 A 18.00
Washer Head, BS HR601, .500-20 UNJF-3A.BS4084
AS32000-004 Plate Washer, Plain 3 2 A 30.00
AS32000-AR AS32000 Amendment Record 3 2 A 30.00
AS32100-199 Bolt, Close Tolerance - Dee Head, .190-32 UNJF-3A MOD.BS 4 2 A 30.00
4084
AS32200-299 Bolt, Close Tolerance - Dee Head, .250-28 UNJF-3A MOD.BS 4 2 A 30.00
4084
AS32300-399 Bolt, Close Tolerance - Dee Head, .3125-24 UNJF-3A MOD.BS 4 2 A 30.00
4084
AS32400-499 Bolt, Close Tolerance - Dee Head, .375-24 UNJF-3A MOD.BS 4 2 A 30.00
4084
AS32500-599 Bolt, Close Tolerance - Dee Head, .4375-20 UNJF-3A MOD.BS 4 2 A 30.00
4084
AS32600-699 Bolt, Close Tolerance - Dee Head, .5000-20 UNJF-3A MOD.BS 4 2 A 30.00
4084
AS36500-599 Screw, Machine, Hexagon Head, Washer Face, .112-40 UNJC- 6 2 A 30.00
3Aa BS 4084
AS36600-699 Screw, Machine, Hexagon Head, Washer Face, 138-32 UNJC- 6 2 A 30.00
3Aa BS 4084
AS36700-799 Screw, Machine, Hexagon Head, Washer Face, .164-32 UNJC- 6 2 A 30.00
3Aa BS 4084
AS40600-649 Socket, Socket Wrench, Double Hexagon, Flank Drive 3 2 A 30.00
AS40660 Adaptor, Straight, Pipe, (Unified to Metric. Pitot) 4 1 A 18.00
AS40661 Adaptor, Straight, Pipe, (Unified to Metric. Static) 4 1 A 18.00
AS40662 Connector, Multiple, Fluid, Pressure (Pitot, Metric) 3 1 A 18.00
AS40663 Connector, Multiple, Fluid (Static, Metric) 2 1 A 18.00
AS40664 Connector, Multiple, Fluid, Pressure (Pivot, Metric) 2 1 A 18.00
AS40665 Cock, Poppet, Drain Assembly (Pitot) 1 1 A 18.00
AS40666 Connector, Multiple, Fluid (Static, Metric) 2 1 A 18.00
AS40667 Cock, Poppet, Drain Assembly (Static) 1 1 A 18.00
AS40668 Connector, Multiple, Fluid, Pressure (Pivot, Metric) 2 1 A 18.00
AS40669 Cock, Poppet, Drain Assembly (Pilot) 1 1 A 18.00
AS40670 Connector, Multiple, Fluid, Pressure (Static, Metric) 2 1 A 18.00
AS40671 Cock, Poppet, Drain Assembly (Static) 1 1 A 18.00
AS40672 Connector, Straight, Fluid Pressure (Pitot, Metric) 1 1 A 18.00
AS40673 Cock, Poppet, Drain Assembly (Pilot) 1 1 A 18.00
AS40674 Connector, Straight, Fluid Pressure (Static, Metric) 1 1 A 18.00
AS40675 Cock, Poppet, Drain Assembly (Static) 1 1 A 18.00
AS41087 Spiral Wrapping, Nylon 1 1 A 18.00
AS41088 Spiral Wrapping, P.T.F.E. 2 1 A 18.00

69
Reference Title Edition Pages Status Price

AS41089-090 TAG, Attachment 2 1 A 18.00


AS41091 Cord Assembly, Retaining (Terylene) 4 1 I 18.00
AS41092 Cable Assembly, Retaining 9 1 A 18.00
AS41093 Flexible Strapping 1 1 A 18.00
AS41094 Pennant 5 1 I 18.00
AS41097 Streamer, Warning 2 1 A 18.00
AS41100-109 Assembly of Self-Locking Nuts 7 3 A 45.00
AS41100-AR AS41100 Amendment Record 7 1 A 18.00
AS41900 Clamp, Loop, Bonding, Metric 3 2 A 30.00
AS41901 Clamp, Loop, Bonding, Metric 3 2 A 30.00
AS41902 Clamp, Cushioned, Metric Pipe 4 1 I 18.00
AS41903 Clamp, Cushioned, Metric Pipe 3 1 I 18.00
AS41910-912 Seals, for use with Cap & Plugs Protection, Metric 3 2 A 30.00
AS41913 Plugs, Protection, Metric Threads 3 2 A 30.00
AS41914 Caps - Short, Protection, Metric Thread 3 2 A 30.00
AS41915 Caps - Short, Protection, Metric Thread 3 2 A 30.00
AS42400-404 Stud Stepped, (.3125 24UNJF-3AMOD BS4084 to 2500 28UNJF- 2 1 A 18.00
3A BS4084), BS S159
AS42405-419 Stud Stepped, (.3125 24 UNJF-3AMOD to .250 28 UNJF-3A 3 1 A 18.00
BS4084)
AS42420-425 Stud Stepped, (.375 24UNJF-3AMOD BS4084 to 3125 24UNJF- 2 1 A 18.00
3A BS4084), BS S159
AS42426-439 Stud Stepped, (.375 24 UNJF-3AMOD to .3125 24UNJF-3A 3 1 A 18.00
BS4084)
AS42440-458 Nut, Self-Locking, Shaft 2 2 A 30.00
AS42700-748 Gasket 8 1 A 18.00
AS42749-799 Gasket 9 1 A 18.00
AS42910-915 Nut, Self-Locking - Bi-Hexagon Waspaloy (Source Control 4 2 A 30.00
Drawing)
AS42951 Ring, Retaining (Friction Locking) 6 6 A 60.00
AS42980- Nut, Plain, Round 3 2 A 30.00
43000
AS43003 Ring, Sealing, Toroidal, DTD5613 Grade 80 (Source Control 4 2 A 30.00
Drawing)
AS43003-AR Amendment Record for Aerospace Standard AS43003 4 1 A 18.00
AS43013 Ring, Sealing, Toroidal, DTD5613 Grade 80 (Source Control 5 7 A 60.00
Drawing)
AS43013-AR Amendment Record for Aerospace Standard AS43013 5 1 A 18.00
AS43014 Ring, Sealing, Toroidal, DTD5613 Grade 90 (Source Control 2 5 A 60.00
Drawing)
AS43020 Swaged Coupling-Typical Joints (Steel) 3 37 A 120.00
AS43021 Nut, Union-Female, Metric Pipe Series (Steel) 2 2 A 30.00
AS43021-AR Amendment Record for Aerospace Standard No. AS43021 2 2 A 30.00
AS43022 Nipple, Swaged (Carbon Steel) 3 3 A 45.00
AS43023 Union (Steel) 1 2 A 30.00
AS43024 Union, Swaged (Carbon Steel) 2 2 A 30.00
AS43025 Nut Union-Male (Steel) 1 2 A 30.00

70
Reference Title Edition Pages Status Price

AS43026 Nipple-Blanking, Short (Steel) 1 2 A 30.00


AS43027 Union-Hexagon, Bulkhead (Steel) 1 2 A 30.00
AS43030 Plug-Blanking (Steel) 1 2 A 30.00
AS43031 Reducer (Steel) 1 2 A 30.00
AS43032 Union-Bulkhead, Triangular Flange (Steel) 1 2 A 30.00
AS43034 Union-Bulkhead, Sealed Flange (Steel) 2 2 A 30.00
AS43036 Elbow - 90 (Steel) 1 2 A 30.00
AS43037 Tee - Equal (Steel) 1 2 A 30.00
AS43038 Tee-Reduced Branch (Steel) 1 2 A 30.00
AS43039 Tee-Increased Branch (Steel) 1 3 A 45.00
AS43040 Tee-Reduced End (Steel) 1 3 A 45.00
AS43041 Tee-Increased End (Steel) 1 3 A 45.00
AS43042 Elbow Assembly - 90, Nipple End, Female Nut Union (Steel) 1 2 A 30.00
AS43043 Elbow - 90, Nipple End, Female Nut Union (Steel) 1 3 A 45.00
AS43044 Nut Union-Thrust Wire - Female (Steel) 1 3 A 45.00
AS43045 Thrust Wire-Nut Union, Female (Steel) 1 2 A 30.00
AS43046 Tee Assembly - Nipple Branch, Female Nut Union (Steel) 1 2 A 30.00
AS43047 Tee - Nipple Branch, Female Nut Union (Steel) 1 3 A 45.00
AS43048 Tee Assembly - Nipple End, Female Nut Union (Steel) 1 2 A 30.00
AS43049 Tee - Nipple End, Female Nut Union (Steel) 1 3 A 45.00
AS43061 Cross-Equal Branches (Steel) 1 2 A 30.00
AS43062 Cross-Reduced Branches (Steel) 1 2 A 30.00
AS43063 Elbow - 135 (Steel) 1 2 A 30.00
AS43064 Elbow Assembly - 135, Nipple End, Female Nut Union (Steel) 1 2 A 30.00
AS43065 Elbow - 135, Nipple End, Female Nut Union (Steel) 1 3 A 45.00
AS43068 Nipple - Blanking, Long (Steel) 1 2 A 30.00
AS43069 Elbow - 90 - Bulkhead (Steel) 1 4 A 55.00
AS43070 Tee-Branch-Bulkhead (Steel) 1 4 A 55.00
AS43071 Tee-End-Bulkhead (Steel) 1 4 A 55.00
AS43072 Elbow - 135 - Bulkhead (Steel) 1 3 A 45.00
AS43080 Tee - Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43081 Elbow - Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43082 Elbow - 135- Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43083 Cross - Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43084 Cross - Forged Blank-Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43085 Bulkhead Adaptor - Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43086 Bulkhead Elbow - Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43087 Bulkhead Tee - Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43088 Bulkhead Tee- Forged Blank - Steel. Swaged Pipe Coupling 2 2 A 30.00
AS43089 Bulkhead Elbow 135- Forged Blank - Steel. Swaged Pipe 2 2 A 30.00
Coupling
AS43090 Swaged Couplings - Typical Joints (Aluminium Alloy) 2 37 A 120.00
AS43091 Nut Union - Female (Aluminium Alloy) 1 2 A 30.00
AS43093 Union (Aluminium Alloy) 1 2 A 30.00

71
Reference Title Edition Pages Status Price

AS43095 Nut Union-Male (Aluminium Alloy) 1 2 A 30.00


AS43097 Union - Hexagon, Bulkhead (Aluminium Alloy) 1 2 A 30.00
AS43098 Washer Plate (Aluminium Alloy) 2 2 A 30.00
AS43099 Nut - Thin (Aluminium Alloy) 1 2 A 30.00
AS43100 Plug - Blanking (Aluminium Alloy) 1 2 A 30.00
AS43101 Reducer (Aluminium Alloy) 1 3 A 45.00
AS43102 Union - Bulkhead, Triangular Flange (Aluminium Alloy) 1 2 A 30.00
AS43103 Washer Plate Triangular (Aluminium Alloy) 2 2 A 30.00
AS43104 Union - Bulkhead, Sealed Flange (Aluminium Alloy) 2 2 A 30.00
AS43105 Washer Plate (Aluminium Alloy) 2 2 A 30.00
AS43133 Elbow - 135 (Aluminium Alloy) 1 4 A 55.00
AS43142 Elbow - 135 - Bulkhead (Aluminium Alloy) 1 3 A 45.00
AS43152 Elbow - 135- Forged Blank - Aluminium Alloy. Swaged Pipe 2 2 A 30.00
Coupling
AS43155 Bulkhead Adaptor - Forged Blank (Aluminium Alloy). Swaged Pipe 2 2 A 30.00
Coupling
AS43159 Bulkhead Elbow 135- Forged Blank (Aluminium Alloy). Swaged 2 2 A 30.00
Pipe Coupling
AS43160 Nipple Swaged (Cres) 4 3 A 45.00
AS43161 Union Swaged (Cres) 4 2 A 30.00
AS43170 Tee - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling 1 2 A 30.00
AS43171 Elbow - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling 1 2 A 30.00
AS43173 Cross - Forged Blank - Aluminium Alloy. Swaged Pipe Coupling 1 2 A 30.00
AS43176 Bulkhead Elbow - Forged Blank - Aluminium Alloy. Swaged Pipe 1 2 A 30.00
Coupling
AS43177 Bulkhead Tee - Forged Blank - Aluminium Alloy Swaged Pipe 1 2 A 30.00
Coupling
AS43178 Bulkhead Tee - Forged Blank - Aluminium Alloy Swaged Pipe 1 2 A 30.00
Coupling
AS43180 Elbow - 90 (Aluminium Alloy) 1 3 A 45.00
AS43181 Tee-Equal (Aluminium Alloy) 1 2 A 30.00
AS43182 Cross-Equal Branches (Aluminium Alloy) 1 2 A 30.00
AS43183 Cross-Reduced Branches (Aluminium Alloy) 1 4 A 55.00
AS43184 Elbow - 90 - Bulkhead (Aluminium Alloy) 1 5 A 60.00
AS43185 Tee-Branch-Bulkhead (Aluminium Alloy) 1 5 A 60.00
AS43186 Tee-End-Bulkhead (Aluminium Alloy) 1 5 A 60.00
AS43187 Tee-Reduced Branches (Aluminium Alloy) 1 2 A 30.00
AS43188 Tee-Increased Branches (Aluminium Alloy) 1 2 A 30.00
AS43189 Tee-Reduced-End (Aluminium Alloy) 1 2 A 30.00
AS43190 Tee-Increased-End (Aluminium Alloy) 1 2 A 30.00
AS43191 Reducer - Adaptor Assembly Nipple End, Male Nut Union (Steel) 1 2 A 30.00
AS43192 Reducer - Adaptor - Nipple End, Male Nut Union (Steel) 2 3 A 45.00
AS43193 Cone Blank (Steel) 1 2 A 30.00
AS43194 Nut Union, Cone Blank (Steel) 1 2 A 30.00
AS43195 Cone Blank Assembly (Steel) 1 1 A 18.00
AS43196 Nipple Blanking Assembly, Long (Steel) 1 1 A 18.00

72
Reference Title Edition Pages Status Price

AS43197 Nipple Blanking Assembly, Short (Steel) 1 1 A 18.00


AS43198 Nipple Blanking Assembly, Long (Aluminium Alloy) 1 1 A 18.00
AS43199 Nipple Blanking Assembly, Short (Aluminium Alloy) 1 1 A 18.00
AS43200-299 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS S159 Silver Coated, 10 (.190)-32 UNJF-3A BS4084
AS43300-399 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS S159 Silver Coated, .250 - 28UNJF-3A.BS4084
AS43400-499 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS S159 Silver Coated, .3125-24 UNJF-3A.BS4084
AS43500-599 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS S159 Silver Coated, .375-24 UNJF-3A.BS4084
AS43600-699 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 6 2 A 30.00
BS HR650, Silver Coated, 10(.190)-32 UNJF-3A.BS4084
AS43700-799 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 4 2 A 30.00
BS HR650, Silver Coated, .250-28 UNJF-3A.BS4084
AS43800-899 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 4 2 A 30.00
BS HR650 Silver Coated, .3125-24 UNJF-3A.BS4084
AS43900-999 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 4 2 A 30.00
BS HR650 Silver Coated, .375-24 UNJF-3A.BS4084
AS44000-099 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS HR601 Silver Coated, 10(.190)-32 UNJF-3A.BS4084
AS44100-199 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS HR601 Silver Coated, .250-28 UNJF-3A.BS4084

AS44200-299 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS HR601 Silver Coated, .3125-24 UNJF-3A.BS4084
AS44300-399 Bolt, Machine, Double Hexagon Extended Washer Head, Drilled, 3 2 A 30.00
BS HR601 Silver Coated, .375-24 UNJF-3A.BS4084
AS44401-403 Lubricating Nipples, Hydraulic Surface-Check Type, Metric 1 3 A 45.00
AS44404-406 Elastomeric Grommets (Various), for Aeronautical Purposes 3 3 A 45.00
AS44407 Pin, Shear, Headed, Close Tolerance, Metric 1 3 A 45.00
AS44408 Collar, Aluminium Alloy, Anodised, Metric 1 1 A 18.00
AS44409-412 Washer, Spring Tension, Metric 2 2 A 30.00
AS44413-417 Elastomeric Blind Grommets (Various) 4 4 A 55.00
AS44441 Union Nut O/D Pipe 2 1 A 18.00
AS44442 Bush for DIA. Pipe Union Nut 2 1 A 18.00
AS44443 Washer for DIA. Pipe Union Nut 1 1 A 18.00
AS44444 Assembly - Union Nut, DIA. Pipe 1 1 A 18.00
AS44445 Retaining Cord Assembly (NomeN) 10 2 A 30.00
AS44445-AR AS44445 Amendment Record 10 1 A 18.00
AS44520-523 Balance Weights, Washer Type 3 2 A 30.00
AS44680 Balance Weights, Clamped-on Type 2 2 A 30.00
AS44691-694 Washer, Double Key - Unified Hexagon 3 3 A 45.00
AS44691-AR AS44691 Amendment Record 3 2 A 30.00
AS44695 Balance Weights, Clamped-on Type, for large Diameter 1 2 A 30.00
Applications
AS44696 Clamps, Balance Weight, for large Diameter Applications 1 1 A 18.00
AS44701 Clamp, Balance Weight 2 1 A 18.00
AS44702 Bolt, Machine - Hexagon Head, .190-32 (Balance Weight) 2 1 A 18.00

73
Reference Title Edition Pages Status Price

AS44708-714 Nut, Self Locking, Shank, Flange Restrained 4 2 A 30.00


AS44725 Wire, Locking - Corrosion Resisting Steel for temperatures up to 1 1 A 18.00
600C
AS44750-753 Nut, Self-Locking, Shank, Flange Restrained (Source Control 7 3 A 45.00
Drawing)
AS44750-AR Nut, Self-Locking, Shank, Flange Restrained Amendment Record 7 2 A 30.00
AS44800-817 Pin, Shoulder, Headless 3 1 A 18.00
AS44860-869 Nut, Self-Locking, Spline Drive, BS HR650 (AMS 5737 or 5732) 1 2 A 30.00
AS46700-709 P Section Rubber Seal (General Purpose) 2 2 A 30.00
AS46712 Washer, Flat, Brass, Metric 1 1 A 18.00
AS46713 Shackle - ISO Diameter Wire Rope, C.R. Steel (Metric Pin Sizes) 1 1 A 18.00
AS46714 Shackle - ISO Diameter Wire Rope, Steel (Metric Pin Sizes) 1 1 A 18.00
AS46715 Shackle - ISO Diameter Wire Rope, C.R. Steel (Inch Pin Sizes) 1 1 A 18.00
AS46716 Shackle - ISO Diameter Wire Rope, Steel (Inch Pin Sizes) 1 1 A 18.00
AS46720-722 Nut, Self-Locking, Plate (Source Control Drawing) 2 2 A 30.00
AS46725-727 Nut, Self-Locking, Plate (Source Control Drawing) 8 3 A 45.00
AS46730 Nut Union - Thrust Wire - Male (Steel) 1 2 A 30.00
AS46731 Nut Union - Thrust Wire - Male - 5.0mm size (Steel) 1 2 A 30.00
AS46732 Thrust Wire - Nut Union, Male (Steel) 1 2 A 30.00
AS46733 Union Adaptor Assembly - Nipple End, Male Nut Union (Steel) 1 2 A 30.00
AS46734 Union Adaptor - Nipple End, Male Nut Union (Steel) 1 3 A 45.00
AS46735 Tee Assembly - Nipple Branch, Male Nut Union (Steel) 1 2 A 30.00
AS46736 Tee - Nipple Branch, Male Nut Union (Steel) 1 3 A 45.00
AS46737 Tee Assembly - Nipple End, Male Nut Union (Steel) 1 2 A 30.00
AS46738 Tee - Nipple End, Male Nut Union (Steel) 1 3 A 45.00
AS46739 Elbow Assembly, 90 - Nipple End, Male Nut Union (Steel) 1 2 A 30.00
AS46740 Elbow - 90 - Nipple End, Male Nut Union (Steel) 1 3 A 45.00
AS46741 Elbow Assembly, 135 - Nipple End, Male Nut Union (Steel) 1 2 A 30.00
AS46742 Elbow - 135 - Nipple End, Male Nut Union (Steel) 1 3 A 45.00
AS46744 Stirrup - Rudder Bar 1 1 A 18.00
AS46745-746 Assembly of Foot Pedal (Rudder Bar) 1 1 A 18.00
AS46747-748 Assembly of Foot Pedal (Rudder Bar) 1 1 A 18.00
AS46749 End Plate for Stirrup (Rudder Bar) 1 1 A 18.00
AS46760 Clamp, Loop, C.R. Steel, Fluorosilicone Rubber Cushion 4 2 A 30.00
AS46761 Clamp, Loop, Aluminium Alloy, Fluorosilicone Rubber Cushion 4 2 A 30.00
AS46762 Spacer, Sleeve (Metric), Thin Wall - Aluminium Alloy 1 2 A 30.00
AS46763 Spacer, Sleeve (Metric), Thick Wall - Aluminium Alloy 1 2 A 30.00
AS46764 Spacer, Sleeve (Metric), Thin Wall - Stainless Steel 1 2 A 30.00
AS46765 Spacer, Sleeve (Metric), Thick Wall - Stainless Steel 1 2 A 30.00
AS46766 Covers, Transport/Protective, for 20 Flanges (Metric) 1 3 A 45.00
AS46767 Nut, Self-Locking, Miniature, Double Lug Floating Anchor, 1 2 A 30.00
Carbon Steel, Cadmium Coated (125,000lbf/in2) 235C
AS46768 Nut, Self-Locking, Miniature, Double Lug Floating Anchor, Cres. 1 2 A 30.00
Steel, Silver Plated (125,000lbf/in2) 425C
AS46769 Nut, Self-Locking, Miniature, Double Lug Floating Anchor, Cres. 2 2 A 30.00

74
Reference Title Edition Pages Status Price

Steel, (125,000lbf/in2) 235C


AS46771 Lead Electrical (for Primary Bonding Purposes) 2 1 A 18.00
AS46771-AR Amendment Record for Drawing Standard AS46771(Issue 2) 5 1 A 18.00
AS46772 Lead Electrical (for Static Bonding Purposes) Unsuitable for 4 1 A 18.00
Lightning Strike Purposes
AS46772-AR Amendment Record for Drawing Standard AS46772 (Issue 4) 5 1 A 18.00
AS46773 Pins, Quick-Release (Ball Type), Non C.R. Steel, T Handle Single 1 2 A 30.00
Acting
AS46774 Pins, Quick-Release (Ball Type), Non C.R. Steel, Ring Handle 1 2 A 30.00
Single Acting
AS46775 Pins, Quick-Release (Ball Type), Non C.R. Steel, L Handle, 1 2 A 30.00
Single Acting
AS46776 Pins, Quick-Release (Ball Type), C.R. Steel, T Handle, Single 1 2 A 30.00
Acting
AS46777 Pins, Quick-Release (Ball Type) CR Steel, Ring Handle, Single 1 2 A 30.00
Acting
AS46778 Pins, Quick-Release (Ball Type) CR Steel, L Handle, Single 2 2 A 30.00
Acting
AS46779 Pin, Quick-Release (Ball Type) Alloy Steel, T Handle, Double 1 1 A 18.00
Acting
AS46780 Pin, Quick-Release (Ball Type) Alloy Steel, Ring Handle, Double 1 2 A 30.00
Acting
AS46781 Pin, Quick-Release (Ball Type) Alloy Steel, L Handle, Double 1 1 A 18.00
Acting
AS46782 Clamp, Loop, Corrosion Resistant Steel Fluorosilicone Rubber 2 2 A 30.00
Cushion (Imperial Dimensions)
AS46783 Clamp, Loop, Aluminium Alloy Fluorosilicone Rubber Cushion 1 2 A 30.00
(Imperial Dimensions)
AS46784-785 Rivet, Blind, Self-Plugging, Flush Break, Mechanically Locked 4 2 C (see note)
Spindle, Aluminium Alloy, Universal Head CANCELLED (Note:
Should this drawing be resurrected in the future, Qualification
Approval would be required)
AS46786-787 Rivet, Blind, Self-Plugging, Flush Break, Mechanically Locked 4 2 C (see note)
Spindle, Aluminium Alloy, Universal Head CANCELLED (Note:
Should this drawing be resurrected in the future, Qualification
Approval would be required)
AS46788 Rivet, Blind, Self-Plugging, Flush Break, Mechanically Locked 4 2 A 30.00
Stem, Corrosion-Resisting Steel, Universal Head, Cadmium
Plated
AS46789 Rivet, Blind, Self-Plugging, Flush Break, Mechanically Locked 4 2 A 30.00
Stem, Corrosion-Resisting Steel, Universal Head, Unplated
AS46790-790L Rivet, Blind, Self-Plugging, Blush Break, Mechanically Locked 4 2 A 30.00
Stem, Corrosion Resisting Steel, 100 Countersunk Head,
Cadmium plated
AS46791 Rivet, Blind, Self-Plugging, Blush Break, Mechanically Locked 4 2 A 30.00
Stem, Corrosion Resisting Steel, 100 Countersunk Head,
Unplated
AS46792 Nut & Bolt Assembly (for Chains) 1 1 A 18.00
AS47741-762 Adaptor, Straight, Pipe 2 4 A 55.00
AS47766-787 Adaptor, Straight, Pipe 2 4 A 55.00
AS47791-810 Adaptor, Straight, Pipe 2 4 A 55.00
AS47816-836 Adaptor, Straight, Pipe 2 4 A 55.00
AS47841-848 Adaptor, Elbow, Pipe 3 4 A 55.00
AS47851-858 Adaptor, Elbow, Pipe 2 4 A 55.00

75
Reference Title Edition Pages Status Price

AS47861-868 Adaptor, Elbow, Pipe 2 3 A 45.00


AS47871-892 Adaptor, Straight, Pipe 2 4 A 55.00
AS47896-917 Adaptor, Straight, Pipe 3 4 A 55.00
AS47921-940 Adaptor, Straight, Pipe 2 4 A 55.00
AS47946-966 Adaptor, Straight, Pipe 2 4 A 55.00
AS47971-978 Adaptor, Elbow, Pipe 2 4 A 55.00
AS47981-988 Adaptor, Elbow, Pipe 2 4 A 55.00
AS47991-998 Adaptor, Elbow, Pipe 2 3 A 45.00
AS48014-099 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 2 2 A 30.00
Shank, .190-32 UNJF-3A BS4084
AS48116-199 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 2 2 A 30.00
Shank, .250-28 UNJF-3A. BS 4084
AS48218-299 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 2 2 A 30.00
Shank, .3125-24 UNJF-3A. BS 4084
AS48320-399 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 2 2 A 30.00
Shank, .375-24 UNJF-3A. BS 4084
AS48400-499 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 4 2 A 30.00
Shank, INCO 718 0.1900-32 UNJF-3A. BS 4084
AS48500-599 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 5 3 A 45.00
Shank, INCO 718 0.2500-28 UNJF-3A. BS 4084
AS48600-699 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 4 2 A 30.00
Shank, INCO 718, 0.3125-24 UNJF-3A. BS 4084
AS48700-799 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 4 2 A 30.00
Shank, INCO 718, 0.3750-24 UNJF-3A. BS 4084
AS48800-899 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 2 2 A 30.00
Shank, Waspaloy, 0.2500-28 UNJF-3A. BS 4084
AS48900-999 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 2 2 A 30.00
Shank, Waspaloy, 0.3125-24 UNJF-3A. BS 4084
AS49000-099 Bolt, Machine, Double Hexagon Extended Washer Head, P.D. 2 2 A 30.00
Shank, Waspaloy, 0.3750-24 UNJF-3A. BS 4084
AS49100-199 Bolt, Tee Head, PD Shank, INCO 718, 0.1900-32 UNJF-3A 5 2 A 30.00
BS4084
AS49200-299 Bolt, Tee Head, PD Shank, INCO 718, 0.2500-28 UNJF-3A 5 2 A 30.00
BS4084
AS49300-399 Bolt, Tee Head, PD Shank, INCO 718, 0.3125-24 UNJF-3A 5 2 A 30.00
BS4084
AS49400-499 Bolt, Tee Head, PD Shank, INCO 718, 0.3750-24 UNJF-3A 5 2 A 30.00
BS4084
AS49500-599 Bolt, Tee Head, PD Shank, Waspaloy, 0.2500-28 UNJF-3A 3 2 A 30.00
BS4084
AS49600-699 Bolt, Tee Head, PD Shank, Waspaloy, 0.3125-24 UNJF-3A 3 2 A 30.00
BS4084
AS49700-799 Bolt, Tee Head, PD Shank, Waspaloy, 0.3750-24 UNJF-3A 3 2 A 30.00
BS4084
AS49800-899 Bolt, Hexagon Head, PD Shank, .190-32 UNJF-3A. BS 4084 2 2 A 30.00
AS49900-999 Bolt, Hexagon Head, PD Shank, .250-28 UNJF-3A. BS 4084 2 2 A 30.00
AS50000-099 Bolt, Hexagon Head, PD Shank, .3125-24 UNJF-3A. BS 4084 2 2 A 30.00
AS50100-199 Bolt, Hexagon Head, PD Shank, .375-24 UNJF-3A. BS 4084 2 2 A 30.00
AS50200-299 Bolt, Hex. Head, PD Shank, INCO 718, 0.1900-32 UNJF-3A. BS 4 2 A 30.00
4084
AS50300-399 Bolt, Hex. Head, PD Shank, INCO 718, 0.2500-28 UNJF-3A. BS 4 2 A 30.00

76
Reference Title Edition Pages Status Price

4084
AS50400-499 Bolt, Hex. Head, PD Shank, INCO 718, 0.3125-24 UNJF-3A. BS 4 2 A 30.00
4084
AS50500-599 Bolt, Hex. Head, PD Shank, INCO 718, 0.3750-24 UNJF-3A. BS 4 2 A 30.00
4084
AS50600-699 Screw, 100 Countersunk Head, Torq-Set, ACR Recess, 112-40 5 2 A 30.00
UNJC-3A. BS 4084
AS50700-799 Screw, 100 Countersunk Head, Torq-Set, ACR Recess, .138-32 5 2 A 30.00
UNJC-3A. BS 4084
AS50800-899 Screw, 100 Countersunk Head, Torq-Set, ACR Recess, .164-32 5 2 A 30.00
UNJC-3A. BS 4084
AS50900-999 Screw, 100 Countersunk Head, Torq-Set, ACR Recess, .190- 5 2 A 30.00
32UNJC-3A. BS 4084
AS51000-099 Screw, 100 Countersunk Head, Torq-Set, ACR Recess, 250-28 5 2 A 30.00
UNJC-3A. BS 4084
AS52000-599 Bolt, Hexagon, Self Retaining Impedance Type, Metric Series 4 3 A 45.00
AS52600-699 Nut, Reduced Hexagon, S/Locking, Deep Counterbored, Metric 1 2 A 30.00
Series
AS52700-709 Nut, Union, Friction Locked (Steel) 1 2 A 30.00
AS52710-719 Ferrule, Welding, Pipe Fitting (Steel) 2 2 A 30.00
AS52720-729 Adaptor, Straight, Tube (Steel) 1 3 A 45.00
AS52730-739 Nut, Union, Friction Locked (Titanium) 3 2 I 30.00
AS52740-749 Ferrule, Welding, Pipe, Fitting (Titanium) 2 2 I 30.00
AS52750-759 Adaptor, Straight, Tube (Titanium) 4 3 I 45.00
AS52760-769 Insert - Inch, Thinwall - Short, Screw Locking (INCO 718) 5 1 A 18.00
AS52770-780 Insert - Metric, Thinwall - Long, Screw Locking (INCO 718) 4 1 I 18.00
AS52790-99 Insert - Inch, Thinwall - Long, Screw Locking (INCO 718) 4 1 A 18.00
AS52800-849 Ring, Welding (Metric and Inch) 1 5 A 60.00
AS52850-990 Spacer, Welding (Metric and Inch) 1 7 A 60.00
AS53761-360 Bolt, Hexagon, Self Retaining Impedance Type, Inch Series 4 3 A 45.00
AS54361-370 Nut, Reduced Hexagon, Self-Locking, Deep Counterbored, Inch 4 2 A 30.00
Series for uses up to 425C - for use with Impedance Type Bolts
AS54381-390 Nut, Self Locking, Extended Washer, Double Hexagon - for use 1 2 A 30.00
with Impedance Type Bolts
AS54461-464 Balance Weights, Washer Type, to suit Metric Fasteners 1 2 A 30.00
AS54470 Nut, S/Locking, Shank, Flange Restrained, 0.1900-32 UNJF-3B 1 3 A 45.00
BS4084, based on AS44750 with 1g,2g,3g, & 6g of additional
mass
AS54471 Nut, S/Locking, Shank, Flange Restrained, 0.2500-28 UNJF-3B 3 3 A 45.00
BS4084, based on AS44751 with 2g,5g & 12g of additional mass
AS54472 Nut, S/Locking, Shank, Flange Restrained, 0.3125-24 UNJF- 3B 2 2 A 30.00
BS4084, based on AS44752 with 2g, 5g, & 14g of additional mass
AS54473 Nut, S/Locking, Shank, Flange Restrained, 0.3750-24 UNJF-3B 2 2 A 30.00
BS4084, based on AS44753 with 3g, 5g, & 15g of additional mass
AS54500-599 Bolt, Close Tolerance - Double Hexagon Extended Washer Head 4 2 A 30.00
INCO 718, 0.1900-32 UNJF-3A MOD BS4084
AS54600-699 Bolt, Close Tolerance - Double Hexagon Extended Washer Head 4 2 A 30.00
INCO 718, 0.2500-28 UNJF-3A MOD BS4084
AS54700-799 Bolt, Close Tolerance - Double Hexagon Extended Washer Head 4 2 A 30.00
INCO 718, .3125-24 UNJF-3A MOD BS4084
AS54800-899 Bolt, Close Tolerance - Double Hexagon Extended Washer Head 4 2 A 30.00

77
Reference Title Edition Pages Status Price

INCO 718, 0.3750-24 UNJF-3A MOD BS4084


AS54900-999 Bolt, Close Tolerance - Double Hexagon Extended Washer Head 4 2 A 30.00
INCO 718, 0.4375-20 UNJF-3A MOD BS4084
AS55000-099 Bolt, Close Tolerance - Double Hexagon Extended Washer Head 4 2 A 30.00
INCO 718, 0.5000-20 UNJF-3A MOD BS4084
AS55200 Nut, Self Locking Shank, Flange Restrained, 0.1900-32 UNJF-3B 1 2 A 30.00
BS4084, based on AS27852 with 1g, 2g, & 3g of additional mass
AS55201 Nut, Self Locking Shank, Flange Restrained, 0.2500-28 UNJF-3B 1 2 A 30.00
BS4084, based on AS27857 with 2g, 4g, & 6g of additional mass
AS55202 Nut, Self Locking Shank, Flange Restrained, 0.3125-24 UNJF- 3B 1 2 A 30.00
BS4084, based on AS27870 with 2g, 5g, & 8g of additional mass
AS55203 Nut, Self Locking Shank, Flange Restrained, 0.3750-24 UNJF- 3B 1 2 A 30.00
BS4084, based on AS27883 with 3g, 6g, & 10g of additional mass
AS55460-469 2 Bolt Flanged Adaptor, Straight Spigot, without Integral Filler, for 1 3 A 45.00
Metric Tube, O Ring Groove & Fasteners
AS55470-479 2 Bolt Flanged Adaptor, 90 Elbow, without Integral Filler, for 1 3 A 45.00
Metric Tube, O Ring Groove & Fasteners
AS55480-489 2 Bolt Flanged Adaptor, Straight Housing, without Integral Filler, 2 3 A 45.00
for Metric Tube, O Ring Groove & Fasteners

AS55500-599 Bolt, Machine, Double Hexagon Extended Washer Head, PD 1 2 A 30.00


Shank, Waspaloy 0.4375-20 UNJF-3A.BS4084
AS55600-699 Bolt, Machine, Double Hexagon Extended Washer Head, PD 1 2 A 30.00
Shank, Waspaloy 0.5000-20 UNJF-3A.BS4084
AS55700-799 Bolt, Tee Head, PD Shank, Waspaloy, 0.4375-20 UNJF- 1 2 A 30.00
3A.BS4084
AS55800-899 Bolt, Tee Head, PD Shank, Waspaloy, 0.5000-20 UNJF- 1 2 A 30.00
3A.BS4084
AS55900-999 Bolt, Machine, Double Hexagon Extended Washer Head, PD 3 2 A 30.00
Shank, INCO 718 0.4375-20 UNJF-3A.BS4084
AS56000-099 Bolt, Machine, Double Hexagon Extended Washer Head, PD 3 2 A 30.00
Shank, INCO 718 0.5000-20 UNJF-3A.BS4084
AS56100-199 Bolt, Tee Head, PD Shank, INCO 718, 0.4375-20UNJF- 3 2 A 30.00
3A.BS4084
AS56200-299 Bolt, Tee Head, PD Shank, INCO 718, 0.5000-20UNJF- 3 2 A 30.00
3A.BS4084
AS56300-399 Bolt, Hex. Head, PD Shank, INCO718, 0.4375-20UNJF- 3 2 A 30.00
3A.BS4084
AS56400-499 Bolt, Hex. Head, PD Shank, INCO718, 0.5000-20UNJF- 3 2 A 30.00
3A.BS4084
AS56500-599 Bolt, Hex. Head, PD Shank, Waspaloy, 0.1900-32UNJF- 2 2 A 30.00
3A.BS4084
AS56600-699 Bolt, Hex. Head, PD Shank, Waspaloy, 0.2500-28UNJF- 1 2 A 30.00
3A.BS4084
AS56700-799 Bolt, Hex. Head, PD Shank, Waspaloy, 0.3125-24UNJF- 1 2 A 30.00
3A.BS4084
AS56800-899 Bolt, Hex. Head, PD Shank, Waspaloy, 0.3750-24UNJF- 1 2 A 30.00
3A.BS4084
AS56900-999 Bolt, Hex. Head, PD Shank, Waspaloy, 0.4375-20UNJF- 1 2 A 30.00
3A.BS4084
AS57000-099 Bolt, Hex. Head, PD Shank, Waspaloy, 0.5000-20 UNJF- 1 2 A 30.00
3A.BS4084
AS57100-199 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 1 2 A 30.00
Waspaloy, 0.1900-32 UNJF - 3A MOD BS4084

78
Reference Title Edition Pages Status Price

AS57200-299 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 1 2 A 30.00
Waspaloy, 0.2500-28 UNJF - 3A MOD BS4084
AS57300-399 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 1 2 A 30.00
Waspaloy, 0.3125-24 UNJF - 3A MOD BS4084
AS57400-499 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 1 2 A 30.00
Waspaloy, 0.3750-24 UNJF - 3A MOD BS4084
AS57500-599 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 1 2 A 30.00
Waspaloy, 0.4375-20 UNJF - 3A MOD BS4084
AS57600-699 Bolt, Close Tolerance - Double Hexagon Extended Washer Head, 1 2 A 30.00
Waspaloy, 0.5000-20 UNJF - 3A MOD BS4084
AS57800-899 Bolt, Tee Head, Close Tolerance Shank, Waspaloy, 0.2500-28 1 2 A 30.00
UNJF- 3A MOD BS4084
AS57900-999 Bolt, Tee Head, Close Tolerance Shank, Waspaloy, 0.3125-24 1 2 A 30.00
UNJF - 3A MOD BS4084
AS58000-099 Bolt, Tee Head, Close Tolerance Shank, Waspaloy, 0.3750-24 1 2 A 30.00
UNJF - 3A MOD BS4084
AS58100-199 Bolt, Tee Head, Close Tolerance Shank, Waspaloy, 0.4375-20 1 2 A 30.00
UNJF - 3A MOD BS4084
AS58200-299 Bolt, Tee Head, Close Tolerance Shank, Waspaloy, 0.5000-20 1 2 A 30.00
UNJF - 3A MOD BS4084
AS58300-399 Bolt, Tee Head, Close Tolerance Shank, INCO718, 0.1900-32 3 2 A 30.00
UNJF - 3A MOD BS4084
AS58400-499 Bolt, Tee Head, Close Tolerance Shank, INCO718, 0.2500-28 3 2 A 30.00
UNJF - 3A MOD BS4084
AS58500-599 Bolt, Tee Head, Close Tolerance Shank, INCO718, 0.3125-24 3 2 A 30.00
UNJF - 3A MOD BS4084
AS58600-699 Bolt, Tee Head, Close Tolerance Shank, INCO718, 0.3750-24 3 2 A 30.00
UNJF - 3A MOD BS4084
AS58700-799 Bolt, Tee Head, Close Tolerance Shank INCO718, 0. 4375-20 3 2 A 30.00
UNJF - 3A MOD BS4084
AS58800-899 Bolt, Tee Head, Close Tolerance Shank INCO718, 0.5000-20 3 2 A 30.00
UNJF - 3A MOD BS4084
AS58900-999 Bolt, Hex. Head, PD Shank, FV535, 0.1900-32 UNJF-3A BS4084 1 2 A 30.00
AS59000-099 Bolt, Hex. Head, PD Shank, FV535, 0.2500-28 UNJF-3A BS4084 1 2 A 30.00
AS59100-199 Bolt, Hex. Head, PD Shank, FV535, 0.3125-24 UNJF-3A BS4084 1 2 A 30.00
AS59200-299 Bolt, Hex. Head, PD Shank, FV535, 0.3750-24 UNJF-3A BS4084 1 2 A 30.00
AS59300-399 Bolt, Hex. Head, PD Shank, FV535, 0.4375-20 UNJF-3A BS4084 1 2 A 30.00
AS59400-499 Bolt, Hex. Head, PD Shank, FV535, 0.5000-20 UNJF-3A BS4084 1 2 A 30.00
AS59500-599 Bolt, Tee Head, PD Shank, FV535, 0.1900-32 UNJF-3A BS4084 1 2 A 30.00
AS59600-699 Bolt, Tee Head, PD Shank, FV535, 0.2500-28 UNJF-3A BS4084 1 2 A 30.00
AS59700-799 Bolt, Tee Head, PD Shank, FV535, 0.3125-24 UNJF-3A BS4084 1 2 A 30.00
AS59800-899 Bolt, Tee Head, PD Shank, FV535, 0.3750-24 UNJF-3A BS4084 1 2 A 30.00
AS59900-999 Bolt, Tee Head, PD Shank, FV535, 0.4375-20 UNJF-3A BS4084 1 2 A 30.00
AS60000-099 Bolt, Tee Head, PD Shank, FV535, 0.5000-20 UNJF-3A BS4084 1 2 A 30.00
AS60100-199 Bolt, Machine, Double Hexagon, Extended Washer Head, PD 1 2 A 30.00
Shank, FV535, 0.1900-32 UNJF-3A BS4084
AS60200-299 D.Hex.ext.washer head, machine, PD shank, PD Shank, FV535, 1 2 A 30.00
0.2500-28UNJF-3A BS4084
AS60300-399 Bolt, Machine, Double Hexagon, Extended Washer Head, PD 1 2 A 30.00
Shank, FV535, 0.3125-24 UNJF-3A BS4084
AS60400-499 Bolt, Machine, Double Hexagon, Extended Washer Head, PD 1 2 A 30.00

79
Reference Title Edition Pages Status Price

Shank, FV535, 0.3750-24UNJF-3A BS4084


AS60500-599 Bolt, Machine, Double Hexagon, Extended Washer Head, PD 1 2 A 30.00
Shank, FV535, 0.4375-20 UNJF-3A BS4084
AS60600-699 Bolt, Machine, Double Hexagon, Extended Washer Head, PD 1 2 A 30.00
Shank, FV535, 0.5000-20UNJF -3A BS4084
AS60700-799 Bolt, Tee Head, Close Tolerance Shank, FV535, 0.1900-32 UNJF- 1 2 A 30.00
3A MOD BS4084
AS60800-899 Bolt, Tee Head, Close Tolerance Shank, FV535, 0.2500-28 UNJF- 1 2 A 30.00
3A MOD BS4084
AS60900-999 Bolt, Tee Head, Close Tolerance Shank, FV535, 0.3125-24 UNJF- 1 2 A 30.00
3A MOD BS4084
AS61000-099 Bolt, Tee Head, Close Tolerance Shank, FV535, 0.3750-24 UNJF- 1 2 A 30.00
3A MOD BS4084
AS61100-199 Bolt, Tee Head, Close Tolerance Shank, FV535, 0.4375-20 UNJF- 1 2 A 30.00
3A MOD BS4084
AS61200-299 Bolt, Tee Head, Close Tolerance Shank, FV535, 0.5000-20 UNJF- 1 2 A 30.00
3A MOD BS4084
AS61300-399 Bolt, Close Tolerance - Double Hexagon, Extended Washer Head, 1 2 A 30.00
FV535, 0.1900-32 UNJF-3A MOD BS4084
AS61400-499 Bolt, Close Tolerance - Double Hexagon, Extended Washer Head, 1 2 A 30.00
FV535, 0.2500-28 UNJF-3A MOD BS4084
AS61500-599 Bolt, Close Tolerance - Double Hexagon, Extended Washer Head, 1 2 A 30.00
FV535, .3125-24 UNJF-3A MOD BS4084
AS61600-699 Bolt, Close Tolerance - Double Hexagon, Extended Washer Head, 1 2 A 30.00
FV535, 0.3750-24 UNJF-3A MOD BS4084

AS61700-799 Bolt, Close Tolerance - Double Hexagon, Extended Washer Head, 1 2 A 30.00
FV535, 0.4375-24 UNJF-3A MOD BS4084
AS61800-899 Bolt, Close Tolerance - Double Hexagon, Extended Washer Head, 1 2 A 30.00
FV535, 0.5000-20 UNJF-3A MOD BS4084
AS61900-934 Clamp, Loop Style, Cushion Reinforced (Electrical Harness) (for 4 2 I 30.00
use with 5mm or 0.190 Inch Bolts)
AS61935-969 Clamp, Loop Style, Cushion Reinforced (Electrical Harness) (for 4 2 I 30.00
use with 6mm or 0.250 Inch Bolts)
AS61970-979 2 Bolt Flanged Adaptor, Straight Spigot, with Integral Filler - for 1 3 A 45.00
Metric Tube O Ring Groove & Fasteners
AS61980-989 2 Bolt Flanged Adaptor - 90 Elbow with Integral Filler - for Metric 1 3 A 45.00
Tube O Ring Groove & Fasteners
AS61990-999 2 Bolt Flanged Adaptor, Straight Housing, with Integral Filler - for 2 3 A 45.00
Metric Tube O Ring Groove & Fasteners
AS62120-129 Ring Wrench - Double Hexagon - Double Ended - Modified Offset 2 2 A 30.00
AS62130-139 Insert Salvage - Metric, Thinwall - Short Screw Locking (INCO 2 1 A 18.00
718)
AS62140-149 Insert Salvage - Inch, Thinwall - Short Screw Locking (INCO 718) 2 1 A 18.00
AS62150-159 Insert Salvage - Metric, Thinwall - Long Screw Locking (INCO 2 1 A 18.00
718)
AS62160-169 Insert Salvage - Inch, Thinwall - Long Screw Locking (INCO 718) 2 1 A 18.00
AS62200-234 Clamp, Loop Style (Snap Lock) Cushion Reinforced (Electrical 5 3 A 45.00
Harness) (for 5,00mm & 0.1900 Inch Fasteners)
AS62250-284 Clamp, Loop Style (Snap Lock) Cushion Reinforced (Electrical 5 3 A 45.00
Harness) (for 6,00mm & 0.2500 Inch Fasteners)
AS62300-349 Nut, Self Locking, Shank, Flange Restrained, Waspaloy 2 2 A 30.00
AS62350 Nut Union (Cres) 1 2 A 30.00

80
Reference Title Edition Pages Status Price

AS62351 Nut Union - Male (Cres) 1 2 A 30.00


AS62352 Nipple - Blanking Short (Cres) 1 2 A 30.00
AS62353 Union - Hexagon - Bulkhead (Cres) 1 2 A 30.00
AS62354 Union - Bulkhead Triangular Flange (Cres) 1 2 A 30.00
AS62355 Tee-Equal (Cres) 1 2 A 30.00
AS62356 Tee-Reduced Branch (Cres) 1 3 A 45.00
AS62357 Tee-Increased Branch (Cres) 1 3 A 45.00
AS62358 Tee-Reduced End (Cres) 1 3 A 45.00
AS62359 Tee-Increased End (Cres) 1 3 A 45.00
AS62360 Elbow Assembly - 90 Nipple End Female Nut Union (Cres) 1 2 A 30.00
AS62361 Elbow 90 Nipple End Female Nut Union (Cres) 1 3 A 45.00
AS62362 Nut Union-Thrust Wire - Female (Cres) 1 3 A 45.00
AS62363 Tee Assembly - Nipple Branch Female Nut Union (Cres) 1 2 A 30.00
AS62364 Tee - Nipple Branch Female Nut Union (Cres) 1 3 A 45.00
AS62365 Tee Assembly - Nipple End Female Nut Union (Cres) 1 2 A 30.00
AS62366 Tee - Nipple End Female Nut Union (Cres) 1 3 A 45.00
AS62367 Cross-Equal Branches (Cres) 1 2 A 30.00
AS62368 Elbow - 90 Bulkhead (Cres) 1 4 A 55.00
AS62369 Elbow - Forged Blank (Cres) Swaged Pipe Coupling 1 2 A 30.00
AS62370 Tee - Forged Blank (Cres) Swaged Pipe Coupling 1 2 A 30.00
AS62371 Cross-Forged Blank (Cres) Swaged Pipe Coupling 1 2 A 30.00
AS62372 Cross-Forged Blank (Cres) Swaged Pipe Coupling 1 2 A 30.00
AS62373 Bulkhead Adaptor - Forged Blank (Cres) Swaged Pipe Coupling 1 2 A 30.00
AS62374 Bulkhead Elbow Forged Blank (Cres) Swaged Pipe Coupling 1 2 A 30.00
AS62403-440 Assembly of Clamp, Loop Style, Box Cushion 6 2 A 30.00
AS62500-534 Clamp, Loop Style, Cushion Reinforced (Electrical Harness) (for 5 2 A 30.00
use with 5mm or 0.190 Bolts)
AS62600-634 Clamp, Loop Style, Cushion Reinforced (Electrical Harness) (for 5 2 A 30.00
use with 6mm or 0.250 Bolts)
AS62700-742 Clamp, Loop Style (Grounding Strip) Cushion 6 4 A 55.00
Reinforced(Electrical Harness) (for use with 5mm or .190 Bolts)
AS62800-842 Clamp, Loop Style (Grounding Strip) Cushion 5 4 A 55.00
Reinforced(Electrical Harness) (for use with 6mm or .250 Bolts)
AS62900-999 Bolt, Machine, Double Hexagon, Extended Washer Head P.D. 1 2 A 30.00
Shank, Waspaloy, 0.1900-32 UNJF-3A. BS4084
AS63000-049 Adaptor, Elbow, Pipe (for Inch Pipes) 1 3 A 45.00
AS63050-099 Adaptor, Elbow, Pipe (for Inch Pipes) 1 3 A 45.00
AS63100-149 Adaptor, Elbow, Pipe (for Metric Pipes) 1 3 A 45.00
AS63150-199 Adaptor, Elbow, Pipe (for Metric Pipes) 1 4 A 55.00
AS63200-235 Clamp, Loop Style (Snap Lock) Cushion High Temperature up to 2 3 A 45.00
550C (for 5,00mm to 0.1900 inch Fasteners)
AS63236 Safety Cable - 0,58mm 3 1 A 18.00
AS63237 Safety Cable - 0,89mm 4 1 A 18.00
AS63238-239 Safety Cable Ferrule (for use with AS63236 & AS63237 Safety 4 1 A 18.00
Cable)
AS63240-245 Rivet, Blind, Self-Plugging, Flush Break, Visible Mechanically 2 4 C (see note)
Locked Stem, Aluminium Alloys Universal Head CANCELLED

81
Reference Title Edition Pages Status Price

(Note: Should this drawing be resurrected in the future,


Qualification Approval would be required)
AS63250-255 Rivet, Blind, Self-Plugging, Flush Break, Visible Mechanically 2 4 C (see note)
Locked Stem, Aluminium Alloys 100 Countersunk Head
CANCELLED (Note: Should this drawing be resurrected in the
future, Qualification Approval would be required)
AS63260-261 Rivet, Blind, Self-Plugging, Flush Break, Visible Mechanically 2 4 C (see note)
Locked Stem, Corrosion Resisting Steel, Universal Head
CANCELLED (Note: Should this drawing be resurrected in the
future, Qualification Approval would be required)
AS63270-271 Rivet, Blind, Self-Plugging, Flush Break, Visible Mechanically 2 4 C (see note)
Locked Stem, Corrosion Resisting Steel 100 Countersunk Head
CANCELLED (Note: Should this drawing be resurrected in the
future, Qualification Approval would be required)
AS63280-289 Nut, Union, Self Locking, Metric Thread 4 2 A 30.00
AS63280-AR AS63280 Amendment Record 4 2 A 30.00
AS63297 Safety Cable - 0,89mm, Reduced End Fitting 2 1 A 18.00
AS63298-299 Safety Cable Ferrule - Extended 2 1 A 18.00
AS63300-399 Assembly of Clamp, Loop Style (Metric) Box Cushion 3 2 A 30.00
3
AS63400 Pipe Couplings, Cone Caps /16 to 1 2 A 30.00
AS63401 Ring, Split, Steel 2 1 A 18.00
AS63402 Pin, Quick-Release, T Handle, Single Acting, Alloy Steel 2 2 A 30.00
AS63403 Pin, Quick-Release, L Handle, Single Acting, Alloy Steel 2 2 A 30.00
AS63410 Drain Valve ( BSP) 1 6 A 60.00
AS63411 Assembly - M16 Adaptor & Drain Valve ( BSP) 1 2 A 30.00
AS63412 Assembly - M18 Adaptor & Drain Valve ( BSP) 1 2 A 30.00
AS63420-423 Nut, Self-Locking, Shank, Flange Restrained, Waspaloy 5 3 A 45.00
AS63420-AR Nut, Self-Locking, Shank, Flange Restrained, Waspaloy 5 2 A 30.00
Amendment Record
AS63450-459 Nut, Self-Locking, Extended Washer, Double Hexagon 1 2 A 30.00
AS63460-469 Nut, Self-Locking, Extended Washer, Double Hexagon - Deep 2 2 A 30.00
Counterbored
AS63470-475 Nut, Self-Locking, Bi-Hexagon, Waspaloy 5 3 A 30.00
AS63476-479 Nut, Self-Locking, Shank, Flange Restrained 4 3 A 45.00
AS63476-AR Nut, Self-Locking, Shank, Flange Restrained Amendment Record 4 2 A 30.00
AS63480-529 Nut, Self-Locking, Shank, Flange Restrained 2 2 A 30.00
AS63530-535 Nut, Self-Locking, Shank, Flange Restrained 2 2 A 30.00
AS63536-539 Nut, Self-Locking Plate 2 2 A 30.00
AS63540-589 Nut, Self-Locking, Shank, Flange Restrained, Waspaloy 4 2 A 30.00
AS63600-659 Spacer, Welding (Metric) 1 2 A 30.00
AS63660-679 Ring, Welding (Metric) 1 2 A 30.00
AS63700-749 Clamp, Loop Style Cushion Reinforced 1 3 A 45.00
AS63750-761 Nut, Union, Tube and Hose Coupling 2 2 A 30.00
AS63762 Balance Weights, Clamped-on Type 1 2 A 30.00
AS63763 Balance Weights, Clamped-on Type, for Large Diameter 1 2 A 30.00
Applications
AS63764 Clamp, Balance Weight for Large Diameter Applications 1 1 A 18.00
AS63765 Clamp, Balance Weight 1 1 A 18.00
AS63850-864 Sealing Ring 2 1 A 18.00

82
Reference Title Edition Pages Status Price

AS63900-999 Bolt, Captive, Reduced Shank 1 2 A 30.00


AS64000-099 Bolt, Captive, Reduced Shank 1 2 A 30.00
AS64100-199 Bolt, Captive, Reduced Shank 1 2 A 30.00
AS64350-362 Nut, Union, Self Locking, Tube and Hose Coupling 1 2 A 30.00
AS64363 Quick Release Pip Pin Push Pull (Imperial) 1 6 A 60.00
AS64364 Quick Release Push Type Pip Pin with Handle (Imperial) 1 3 A 45.00
AS64365 Quick Release Pull Type Pip Pin 3/16 in Diameter 1 1 A 18.00
AS64366-374 Nut, Self Locking, Spline Drive BSHR650 (AMS5737 or 1 2 A 30.00
AMS5732)
AS64375-378 Nut, Reduced Hexagon, Self Locking, Deep Counterbored, Inch 1 2 A 30.00
Series for uses up to 425C for use with Impedance Type Bolts
AS64379-380 Nut, Self-Locking, Extended Washer, Double Hexagon for use 1 2 A 30.00
with Impedance Type Bolts
AS64381-391 Nut Assembly, Pipe Closure, Self-Locking Union Nuts 1 1 A 18.00

AS64400 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 1 2 A 30.00
Spindle, 100 Countersunk Head Aluminium Alloy
AS64401 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 1 2 A 30.00
Stem, 100 Countersunk Head Aluminium Alloy, CRES Cd plated
AS64402 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 1 2 A 30.00
Stem, 100 Countersunk Head Aluminium Alloy, CRES unplated
AS64403 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 1 2 A 30.00
Spindle, Universal Head, Aluminium Alloy
AS64404 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 1 2 A 30.00
Stem, Universal Head,, CRES Cd plated
AS64405 Rivet, Blind, Self Plugging, Flush Break, Mechanically Locked 1 2 A 30.00
Stem, Universal Head,, CRES unplated
AS65000 Bolt, 100 Csk Reduced Head, Spiral Drive, UNJF Thread 3 12 A 70.00
AS65000-AR Bolt, 100 Csk Reduced Head, Spiral Drive, UNJF Thread 3 3 A 45.00
Amendment Record
AS65010 Bolt, 100 Csk, Spiral Drive, UNJF Thread 2 6 A 60.00
AS65010-AR Bolt, 100 Csk, Spiral Drive, UNJF Thread Amendment Record 2 3 A 45.00
AS65110 Nut Self locking Shank Flange Restrained based on AS63476 2 4 A 55.00
with additional mass.
AS65111 Nut Self locking Shank Flange Restrained based on AS63477 2 4 A 55.00
with additional mass.
AS65112 Nut Self locking Shank Flange Restrained based on AS63478 2 4 A 55.00
with additional mass.
AS65113 Nut Self locking Shank Flange Restrained based on AS63479 2 4 A 55.00
with additional mass.
AS65300 Bolt, 100 Csk Reduced Head, Spiral Drive, MJ Thread Split Pin 1 8 A 65.00
Hole Option, Titanium Alloy (1100 MPa, 315C)

83
ESC Specifications

84
Reference Title Edition Pages Status Price

ESC10 High Temperature Electrical Connectors (generally to MIL-C- 3 33 A 120.00


83723 Series III)
ESC30 High Temperature Electrical Contacts (generally to MIL-C-39029) 2 7 A 60.00
ESC50 Connector Accessory : End Fittings (Cable Clamps without Strain 2 2 I 30.00
Relief)
ESC51 Connector Accessory : End Fittings (Cable Clamps without Strain 2 3 I 45.00
Relief)
ESC52 Connector Accessory : End Fittings (Cable Clamps, 90 Strain 2 3 I 45.00
Relief)
ESC53 Bush (Cable Support), Connector Accessory 4 3 A 45.00
ESC61 Connector Accessory: Outlet Nut 2 5 A 60.00
ESC62 Connector Accessory: Outlet 2 5 A 60.00
ESC63 Connector Accessory: Clip 1 6 A 60.00
ESC65 Backshell, Assembly Straight, RFI / EMI Cone Grounding, anti- 3 7 A 60.00
decoupling (MS 3155 Connector Interface MOD)
ESC66 Backshell, Assembly 90 RFI / EMI Cone Grounding, anti- 3 7 A 60.00
decoupling. (MS 3155 Connector Interface MOD)
ESC67 Backshell, Assembly 45 RFI / EMI Cone Grounding, anti- 3 7 A 60.00
decoupling. (MS 3155 Connector Interface MOD)
ESC72 Backshell, Assembly Straight, RFI / EMI Cone Grounding, anti- 1 7 A 60.00
decoupling (MS 3155 Connector Interface MOD)
ESC73 Backshell, Assembly 90 RFI / EMI Cone Grounding, anti- 1 7 A 60.00
decoupling. (MS 3155 Connector Interface MOD)
ESC74 Backshell, Assembly 45 RFI / EMI Cone Grounding, anti- 1 7 A 60.00
decoupling. (MS 3155 Connector Interface MOD)
ESC75 Backshell, Assembly Straight, RFI / EMI Cone Grounding, 100% 3 7 A 60.00
Anti-Decoupling
ESC76 Backshell, Assembly 90 RFI / EMI Grounding, 100% anti- 5 7 A 60.00
decoupling
ESC76-AR Amendment Record for Backshell, Assembly 90 RFI / EMI 5 1 A 18.00
Grounding, 100% anti-decoupling
Backshell, Assembly 45 RFI / EMI Grounding, 100% anti-
ESC77 decoupling 4 7 A 60.00

85
RS Specifications

86
Reference Title Edition Pages Status Price

RS1 Standard Abbreviations 1 3 A 45.00


RS2-18 Angle Extrusions 1 1 A 18.00
RS31-42 Bulb Angle Extrusions 1 1 A 18.00
RS51-78 Tee Extrusions 1 1 I 18.00
RS91-115 Symmetric Square Channel Extrusions 1 1 A 18.00
RS116 A|D|S Protective Treatment Chart 5 13 A+I 70.00
(Sheets
1-4 = A)
RS118 Radii and Widths of Milling Cutters 1 1 A 18.00
RS119 Armour Protection 1 4 A 55.00
RS127 Standard Rolled Angle Section (24 Gauge) 1 1 A 18.00
RS128 Standard Rolled Angle Section (22 Gauge) 1 1 A 18.00
RS129 Standard Rolled Angle Section (20 Gauge) 1 1 A 18.00
RS130 Standard Rolled Angle Section (18 Gauge) 1 1 A 18.00
RS131 Standard Rolled Angle Section (16 Gauge) 1 1 A 18.00
RS132 Standard Rolled Top-Hat Section (Lipped) (24 Gauge) 1 1 A 18.00
RS133 Standard Rolled Top-Hat Section (Lipped) (22 Gauge) 1 1 A 18.00
RS134 Standard Rolled Top-Hat Section (Lipped) (20 Gauge) 1 1 A 18.00
RS135 Standard Rolled Top-Hat Section (Lipped) (18 Gauge) 1 1 A 18.00
RS136 Standard Rolled Top-Hat Section (Lipped) (16 Gauge) 1 1 A 18.00
RS137 Standard Rolled Top-Hat Section (Lipped) (20 Gauge) 1 1 A 18.00
RS138 Standard Rolled Top-Hat Section (Lipped) (18 Gauge) 1 1 A 18.00
RS139 Standard Rolled Top-Hat Section (Lipped) (16 Gauge) 1 1 A 18.00
RS178 Standard Diameters 1 1 A 18.00
RS179 Standard Threads 1 1 A 18.00
RS182 Fits for Ball Bearings 1 1 A 18.00
RS183 Standard Capacity Ratings for Hydraulic Components 2 1 A 18.00
RS185 Standard Jack and Shock Absorber Data 1 1 A 18.00
RS186 Standard Airman 1 2 A 30.00
RS193 Standard Layout Tables 1 1 A 18.00
RS194 Standard Layout Blank 1 1 A 18.00
RS195 Preparation of Surface of Layout Blanks for Photographic 1 1 A 18.00
Reproduction.
RS196 Full Scale Layout Reproduction. Recommended Terms & 2 2 A 30.00
Abbreviations.
RS197 Full Scale Layout Reproduction Negative Sizes 1 1 A 18.00
RS198 Full Scale Layout Reproduction, Fuselage Lines, Identification & 1 2 A 30.00
Layout
RS199 Standard Diameters of Shock Absorbers and Jack Cylinders 1 1 A 18.00
RS200 Standard Diameters of Jack Piston Rods 1 1 A 18.00
RS201 Hydraulic Hand Pump (Double Acting Type) 1 1 A 18.00
RS202 Preparation of Surface of Layout Blanks, for Lithographic 1 1 A 18.00
Reproduction
RS208 Bend Allowances for Full Scale Layout 1 1 A 18.00
RS209 Bend Allowances for Full Scale Layout 1 1 A 18.00
RS210 Bend Allowances for Full Scale Layout 1 1 A 18.00
RS211 Master Reference 1 1 A 18.00

87
Reference Title Edition Pages Status Price

RS214 Gauging Systems for A|D|S Standard Propeller Shaft & Hub 3 9 A 65.00
Serrations
RS217 Cable Identification Sleeves 2 1 I 18.00
RS250 Installation Drawing of Flanged Half of 1 Fuelling Coupling 5 1 A 18.00
RS251 Installation Drawing of Flanged Half of 2 Fuelling Coupling 3 1 A 18.00
RS255 Standard No.1 Propeller Shaft 2 1 A 18.00
RS256 Ring Nuts 1 1 A 18.00
RS263 Standard No. 2 Propeller Shaft and Engine Nose 1 1 A 18.00
RS264 Standard No. 3 Propeller Shaft and Engine Nose 1 1 A 18.00
RS265 Standard No. 4 Propeller Shaft and Engine Nose 1 1 A 18.00
RS266 Standard No. 5 Propeller Shaft and Engine Nose 1 1 A 18.00
RS267 Standard No. 6 Propeller Shaft and Engine Nose 1 1 A 18.00
RS268 Standard No. 4/6 Counter Rotating Propeller Shafts (Integral 1 1 A 18.00
Bearing Race) & Engine Nose
RS269 Standard No. 4/6 Counter Rotating Propeller Shafts (Separate 1 1 A 18.00
Bearing Race) & Engine Nose
RS270 Standard No. 5/7 Counter Rotating Propeller Shafts & Engine 1 1 A 18.00
Nose
RS271 Standard 5 / 7 Counter Rotating Propeller Shafts & Engine 1 1 A 18.00
Nose
RS299 Table and General Information of Accessory Flanges 2 4 A 55.00
RS300 Circular Accessory Flange & Drive / Accessory Pad & Drive, 2 2 A 30.00
4.290 P.C.D. N .500
RS301 Circular Flange & Drive / Circular Pad & Drive, 4.290 P.C.D. N 3 2 A 30.00
.625
RS302 Circular Flange & Drive / Circular Pad & Drive 5.000 P.C.D. N 3 2 A 30.00
.750
RS303 Circular Flange & Drive / Circular Pad & Drive 6.000 P.C.D. N 3 2 A 30.00
.875
RS304 Circular Flange & Drive / Circular Pad & Drive 7.000 P.C.D. N 3 2 A 30.00
1.000
RS305 Circular Flange & Drive / Circular Pad & Drive 8.000 P.C.D. N 3 2 A 30.00
1.125
RS306 Circular Flange & Drive / Circular Pad & Drive 9.000 P.C.D. N 3 2 A 30.00
1.250
RS307 Triangular Flange & Drive / Triangular Pad & Drive 3.450 P.C.D. 3 2 A 30.00
N .375
RS308 4 P.C. Diameter Starter Mounting Flange / Starter Pad & Drive 1 2 A 30.00
RS309 5 P.C. Diameter Starter Mounting Flange / Starter Pad & Drive 1 2 A 30.00
RS310 5.750 P.C. Diameter Starter Mounting Flange / Starter Pad & 1 2 A 30.00
Drive
RS311 7 P.C. Diameter Starter Mounting Flange / Starter Pad & Drive 1 2 A 30.00
RS313 6 Constant Speed Unit Pad & Drive / Flange & Shaft 5.400 4 2 A 30.00
P.C.D. N .875 (Twin Oilway)

RS314 Circular Flange & Drive / Circular Pad & Drive, 4.290 P.C.D. N 3 2 A 30.00
.500
RS316 Circular Flange & Drive / Circular Pad & Drive, 6.000 P.C.D. N 4 2 A 30.00
.625
RS317 Circular Flange & Drive / Circular Pad & Drive, 7.000 P.C.D. N 3 2 A 30.00
.750
RS318 Circular Accessory Flange & Drive / Accessory Pad & Drive 3 2 A 30.00

88
Reference Title Edition Pages Status Price

8.000 P.C.D. N .875


RS319 Circular Accessory Flange & Drive / Accessory Pad & Drive 2 2 A 30.00
9.000 P.C.D. N 1.000
RS320 Circular Accessory Flange & Drive / Accessory Pad & Drive 10.5 2 2 A 30.00
P.C.D. N 1.125
RS321 Circular Accessory Flange & Drive / Accessory Pad & Drive 12 2 2 A 30.00
P.C.D. N 1.250
RS323 Supercharger Mounting Flange / Supercharger Pad & Drive 1 2 A 30.00
6.000 CTS
RS324 Supercharger Mounting Flange / Supercharger Pad & Drive 2 2 A 30.00
2.4404 (62M.M.) CTS
RS325 Supercharger Mounting Flange / Supercharger Pad & Drive 2 2 A 30.00
3.307 (84M.M.) CTS
RS326 Supercharger Mounting Flange / Supercharger Pad & Drive 2 2 A 30.00
4.500 CTS
RS327 Square Flange & Drive / Square Pad & Drive, 1.437 P.C. DIA 1 2 A 30.00
RS328 Square Flange & Drive / Square Pad & Drive, 2.000 P.C. DIA 1 2 A 30.00
RS329 Square Flange & Drive / Square Pad & Drive, 2.625 P.C. DIA 1 2 A 30.00
RS330 Square Flange & Drive / Square Pad & Drive, 3.125 P.C. DIA 1 2 A 30.00
RS331 Square Flange & Drive / Square Pad & Drive, 3.812 P.C. DIA 1 2 A 30.00
RS332 Square Flange & Drive / Square Pad & Drive, 4.312 P.C. DIA 2 2 A 30.00
RS333 Circular Flange & Drive for Electrical Machines / Pad & Drive for 1 2 A 30.00
Electrical Machines : 5.000 P.C.D. N .500
RS334 Circular Flange & Drive for Electrical Machines / Pad & Drive for 1 2 A 30.00
Electrical Machines : 6.000 P.C.D. N .5625
RS335 Circular Flange & Drive for Electrical Machines / Pad & Drive for 1 2 A 30.00
Electrical Machines : 7.000 P.C.D. N .6875
RS336 Circular Flange & Drive for Electrical Machines / Pad & Drive for 1 2 A 30.00
Electrical Machines : 8.000 P.C.D. N .8125
RS337 Circular Flange & Drive for Electrical Machines / Pad & Drive for 1 2 A 30.00
Electrical Machines : 9.000 P.C.D. N .9375
RS338 2.175 P.C. DIA. Square Accessory Flange & Mounting Pad 1 2 A 30.00
RS340 2 Bolt Flange & Drive / 2 Bolt Actuator Flange Drive (primarily for 1 2 A 30.00
Valves and Cocks)
RS341 Circular Flange & Drive / Circular Pad & Drive (Pinion Located) 3 2 A 30.00
8.000 P.C. DIA. N 1.125
RS342 5 Propeller Control Unit Pad & Drive / Flange & Shaft 4.400 2 2 A 30.00
P.C.D. N .650 (Three Oilway)
RS343 6 Propeller Control Unit Pad & Drive / Flange & Shaft 5.400 2 2 A 30.00
P.C.D. N .875 (Three Oilway)
RS344 Circular Flange & Drive / Mounting Pad & Drive, 5.197 P.C.D. N 1 2 A 30.00
.500

RS345 Circular Flange & Drive / Mounting Pad & Drive, 5.197 P.C.D. N .625 1 2 A 30.00
RS346 Square Flange & Drive / Square Pad & Drive, 3.812 P.C.D. N 1 2 A 30.00
.375
RS403 Dimensions for Mounting Rings & for Circular Flanges of Tank 1 1 A 18.00
Mounted Accessories
RS404 Typical Assembly showing Incorrect & Correct Method. Non- 1 1 A 18.00
reversible Chain
RS405 Typical Assembly showing Incorrect & Correct Method. Non- 1 1 A 18.00
Reversible Chain
RS406 Typical Assembly showing Incorrect & Correct Method. Non- 1 1 A 18.00

89
Reference Title Edition Pages Status Price

Reversible Chain
RS407 Relation of Sprocket to Guard. Non-Reversible Chain. 1 1 A 18.00
RS408 Project Plates. Non-Reversible Chain. 1 1 A 18.00
RS409 Full Scale Layout Reproduction recommended Standard Symbols 1 3 A 45.00
RS410 Coupling Flanges, 60 Vee Form 3 1 I 18.00
RS411 Standard Dimensions for Manhole Flanges for Aircraft Tanks 1 1 A 18.00
RS412 Standard Dimensions for Manhole Flanges for Aircraft Tanks 1 1 A 18.00
RS413 Non-Reversible Chains 1 1 A 18.00
RS414 A Standard Method of Dimensioning Compressor Blades 2 3 A 45.00
RS415 A Standard Method of Dimensioning Turbine Blades 2 4 A 55.00
RS417 Std. No.1 Propeller Shaft (with Unified Screw Threads) 2 1 A 18.00
RS418 Std. No.2 Propeller Shaft & Engine Nose (Unified Screw Threads) 2 1 A 18.00
RS419 Std. No.3 Propeller Shaft & Engine Nose (with Unified Screw 2 1 A 18.00
Threads)
RS420 Std. No.4 Propeller Shaft & Engine Nose (with Unified Screw 2 1 A 18.00
Threads)
RS421 Std. No.5 Propeller Shaft & Engine Nose (with Unified Screw 2 1 A 18.00
Threads)
RS422 Std. No.6 Propeller Shaft & Engine Nose (with Unified Screw 2 1 A 18.00
Threads)
RS428 Tapped Holes for Wire Thread Inserts , (B.A., B.S.F., B.S.W. 5 2 A 30.00
Threads) Unplated, Cadmium Plated
RS429 Tapped Holes for Wire Thread Inserts, (B.S.P.F. Threads), 4 2 A 30.00
Unplated, Cadmium plated
RS430 Tapped Holes for Wire Thread Inserts, (Unified Threads), 5 2 A 30.00
Unplated, Cadmium plated
RS432 Lofting Procedure 1 2 A 30.00
RS433 Handle for Escape Hatch Control 1 1 A 18.00
RS434 Knob for High Pressure Fuel Control (incorporating Re-Light 2 1 A 18.00
Switch)
RS435 Grooves for Retaining Rings. AS 4570 2 1 A 18.00
RS436 Grooves for Circlips, AS 4571 2 1 A 18.00
RS437 Knob - Braking Parachute Control 3 1 A 18.00
RS438 Wing Spreading and Folding Control Lever 2 1 A 18.00
RS440 Identification of B.A. & B.S.F. Nuts & Bolts, and Identification of 2 2 A 30.00
Unified Nuts, Bolts & Screws
RS441 Details of Screwdriver for use with Plunge Milled Slots 1 2 A 30.00
RS442 Basic Seat Rail Geometry & Basic Seat Pin Geometry 2 2 A 30.00
RS443 40 V, Coupling Data 2 2 A 30.00
RS444 Dimensions.of Threads, not included in B.S.2779 (5/16 & 7/16 Pipe 3 2 A 30.00
Diameters, Special Truncation)
RS445 Flanged Lightening Holes 1 3 A 45.00
RS446 Sleeve for increasing 5/16 O/D Pipe to 3/8 O/D 3 1 A 18.00
RS501-521 Circular Flanges & Drives / Circular Pads & Drives 1 2 A 30.00
RS538 2.175 P.C.DIA. Square Accessory Flange & Square Mounting 1 2 A 30.00
Pad - Unified Thread
RS542 5 PCU Pad & Drive 4.400 PCD N .650, Three Oilway. Unified 2 2 A 30.00
Threads 5 PCU Flange & Shaft 4.400 PCD N .650, Three
Oilway Unified Threads
RS543 6 PCU Pad & Drive 5.400 PCD N .875. Three Oilway. Unified 2 2 A 30.00
Threads 6 PCU Flange & Shaft 5.400 PCD N .875. Three

90
Reference Title Edition Pages Status Price

Oilway. Unified Threads


RS560-569 Pipe Coupling Flanges 1 1 A 18.00
RS570 Percentage R.P.M. Tachometer Flange & Drive 2 2 A 30.00
RS571-588 Accessory Drives & Pads (Taper Flanges) 4 2 I 30.00
RS589-594 Accessory Drives & Pads (Taper Flanges) 3 2 I 30.00
RS600 Code to Protective Treatments 3 19 I 90.00
RS605 Standard No.6 Propeller Shaft & Engine Nose (with Unified Screw 1 1 A 18.00
Threads & Four-Line Oil System)
RS610 Identification Markings of Parts and Assemblies 8 12 A 70.00
RS610-AR Amendment Record for RS610 8 1 A 18.00
RS611 Recommendations for the Identification & Packaging of Rubber 5 1 I 18.00
Components
RS612 Recommended Storage Procedure for Rubber & Rubber 4 4 I 55.00
Components
RS613 Recommended Storage Life for Rubber & Rubber Components 3 4 I 55.00
RS614 Recommended Colour Code for the Identification of Rubbers in 3 3 I 45.00
Aircraft
RS616 B.S.W. Thread Insert - Wire Section 1 1 A 18.00
RS617 B.A. Thread Insert - Wire Section 1 1 A 18.00
RS618 B.S.F. Thread - Wire Section 1 1 A 18.00
RS619 B.S.P.F. Thread Insert - Wire Section 1 1 A 18.00
RS620 U.N.C. Thread Insert - Wire Section 3 1 A 18.00
RS621 U.N.F. Thread - Wire Section 2 1 A 18.00
RS622 Definition of Drawing State 4 1 A 18.00
RS623 Accessory Drives & Mounting Pads (Taper Flanges - Involute 3 8 A 65.00
Splines)
RS678 Fasteners, Rolled Threads, Chamfers, Lead Threads & Runouts 6 6 A 60.00
RS678-AR Amendment Record for RS678 6 1 A 18.00
RS679 Insert, Screw Thread, Unified, Helical Coil - Tang & Notch Details 1 1 A 18.00
RS680 Wrenching Configuration Double Hexagon (12 point) for Threaded 4 1 A 18.00
Fasteners
RS681 Directions for Application of P.T.F.E. Impregnated Marker Tape 2 1 A 18.00
RS682 Standard Servicing Earth Bolt (Ground Contact) 1 1 A 18.00
RS683 Minimum effective Wrench Pad Heights for Double Hexagon 1 1 A 18.00
Fasteners
RS684 Spring Clips and Bushes for use with Rigid Tubes 1 1 A 18.00

RS685 Pipe Couplings, Unified Threads, Thrust Wire Nuts Assembly & 3 2 A 30.00
Tube Couplings Unified Threads
RS686 Application of Locating Pins 2 3 A 45.00
RS696 Recommended Diameters & Thickness for Meta Tube - Metric 2 1 A 18.00
Series
RS697 The Wire Locking of Threaded Items 6 16 A 75.00
RS698 Application of Self Locking Nut Retainers 1 1 A 18.00
RS699 Installation Information for Rivet Blind AGS 3920 to 3923 1 1 A 18.00
RS700 General Requirements for A.S. and A.G.S. Parts 2 3 A 45.00
RS701 Recommended Thicknesses for Sheet Metal in the Metric Series 2 1 A 18.00
RS702 Recommended Diameters for Wire in the Metric Series 1 1 A 18.00
RS704 Recommended Size & Location of Locking Wire Holes in Bolts, 3 2 A 30.00
Screws & Nuts

91
Reference Title Edition Pages Status Price

RS709 Tolerances for High Performance Austenitic Steel Piping (Tubing) 2 1 A 18.00
Metric in the Softened Condition
RS712 Decimal Marker 2 1 I 18.00
RS713 Rivet Tails 1 1 A 18.00
RS714 External Markers Definition of Sizes 5 16 A 75.00
RS715 Legend Markers Self Adhesive 1 2 A 30.00
RS716 Application of Self Adhesive External Markers 1 6 A 60.00
RS717 Practical Expression of Aerospace System Pressures 1 1 A 18.00
RS718 Connection, Threaded, Geometry Low Pressure Corrugated Hose 1 1 A 18.00
RS719 The Sponsor System 2 6 A 60.00
RS720 Minimum Clearance around Hydraulic Lubricating Nipples 1 1 A 18.00
RS721 Paint Container Label 1 1 A 18.00
RS722 Selection of Cotter Pins - Metric 1 1 A 18.00
RS723 Selected Aerospace Diameter-Pitch Combinations of Metric 60 1 1 A 18.00
Screw Threads for Nuts and Bolts
RS724 Forgins, Tolerances and Surface Condition 1 2 A 30.00
RS726 Removal of Incomplete Threads 1 2 A 30.00
RS727 Tapped Hole and Fitted Size Data for Helical Coil Wire Thread 2 2 A 30.00
Inserts (Metric)
RS728 Insert, Screw Thread, Metric, Helical Coil - Tang & Notch details 2 1 A 18.00
RS729 Metric Thread Insert Wire Section 1 2 A 30.00
RS730 Alternative Materials for the Manufacture of Metric Swaged Pipe 2 3 A 45.00
Couplings
RS732 Manufacturers Identification Monogram for Aerospace Fasteners 20 1 I 18.00
(RS732 Sheets 1 26 : This document is frozen at the current
issue - for symbols for Qualified Manufacturer see TS200)
RS733 Hole sizes for Solid Rivets 1 1 A 18.00
RS734 Groove Dimensions for Gaskets (Metallic Seals) 1 2 A 30.00
RS735 Component Tapped Hole Geometry (for use with Swaged 1 2 A 30.00
Coupling Male Nut Units ref AS43020 & 43090)
RS736 British Metric Swaged Pipe Coupling (AS 43020 and AS 43090 1 25 A 95.00
Series) Summary of Tests
RS740 British Metric Swaged Pipe Coupling (AS 43020 and AS 43090 1 23 A 95.00
Series) Designer's Guide
RS741 Shaft & Groove Dimensions for Ring, Retaining (Friction Locking) 1 5 A 60.00
RS742 Shaft Dimensions and Data for Nut, Plan, Round 2 2 A 30.00
RS743 Connector Specifications Identification System 4 3 A 45.00
RS745 Ring Spanner Wrench Configuration and Ring Envelope 1 2 A 30.00
RS746 Tapped Hole & Counterbore Details for Thinwall Inch Threaded 1 5 A 60.00
Inserts Long and Short Series
RS747 Hole Sizes for Self Retaining Impedance Type Bolts. Inch 1 1 A 18.00
Series
RS748 Hole Sizes Self Retaining Impedance Type Bolts. Metric Series 1 1 A 18.00
RS749 Tube Couplings Unified Threads, Self-Locking Nuts 1 2 A 30.00
RS750 Cancellation of AGS4719/20 & AS46788/89/90/91 (MBC) Rivets 2 4 A No charge
on website
www.adsgr
oup.org.uk

92
TS Specifications

93
Reference Title Edition Pages Status Price

TS2 Performance Specification for All Metal Self-Locking Nuts (Unified 5 26 A 95.00
Threads) strength 125,000 lbf/in min.tensile (56 tonf/in)
250C.max.
TS3 Performance Specification for All Metal Self-Locking Nuts (Unified 5 26 A 95.00
Threads) strength 125,000 lbf/in min.tensile (56 tonf/in)
450C.max.
TS4 Performance Specification for All Metal Self-Locking Nuts (Unified 5 26 A 95.00
Threads) strength 160,000 lbf/in min.tensile (71 tonf/in)
250C.max.
TS8 Performance Specification for All Metal Self-Locking Nuts (UNJ 10 39 A 120.00
Threads) 1100MPa (160,000 lbf/in) Minimum Tensile Strength at
Room Temperature
TS9 Performance Specification for All Metal Self-Locking Shaft Nuts 4 23 A 95.00
Unified Threads). Non Corrosion Resistant Steel, rated
temperature 235C.
TS17 Performance Specification for Inserts, Screw Thread, Metric, 2 13 A 70.00
Screw- Locking Helical Coil, AMS 7246 (Inconel N750), Silver
Coated
TS21 Manufacturing Specification for Bolts, 900 MPa (130,000 lbf/in) 11 21 A 95.00
Tensile at Room Temperature
TS22 Manufacturing Specification for Bolts, 1100 MPa (159,000 lbf/in) 10 21 A 95.00
Tensile at Room Temperature
TS23 Manufacturing Specification for Bolts, 1000 MPa (145,000 lbf/in) 9 22 A 95.00
Tensile at Room Temperature
TS24 Manufacturing Specification for Bolts, 1275 MPa (185,000 lbf/in) 6 24 A 95.00
Tensile at Room Temperature, 1000 MPa (145,000 lbf/in) Tensile
at 650C
TS25 Manufacturing Specification for Bolts, 1210 MPa (175,000 lbf/in) 8 22 A 95.00
Tensile at Room Temperature
TS26 Technical Specification for All Metal Self-Locking Nuts (UNJ 3 45 A 140.00
Threads) 1210 MPa (175,000 lbf/in) Minimum Tensile Strength at
Ambient Temp.
TS27 Manufacturing Specification for Studs, Bolts & Screws in BS 4 18 A 85.00
HR601 (Nimonic) Material. 1000 MPa (145,000 lbf/in) Tensile at
Room Temp. (for which Forging is optional & Qualification not a
requirement)
TS38 Manufacturing & Inspection Requirements for Rivets, Blind, Self- 4 14 A 70.00
plugging, Flush Breaks, mechanically Locked Stem, Corrosion
Resisting Steel, plain and cadmium plated (AS46788 thru
AS46791), (AS49788L thru AS46791L)
TS39 Manufacturing & Inspection Requirements for Rivets, Blind, Self- - - I -
plugging, Flush Break, mechanically Locked Stem, Aluminium
Alloys (AS46794 to AS46787) Note : Should this Specification for (see
the drawings be resurrected in the future, Qualification Approval note)
shall be required
TS40 Performance Specification for Inserts, Screw Thread, Unified, 6 9 A 65.00
Screw Locking, Helical Coil, Corrosion Resistant Steel, DTD734,
Cadmium coated
TS41 Manufacturing Specification for Inserts, Screw Thread, Unified, 6 17 A 80.00
Screw Locking, Helical Coil, BS HR503 (Nimonic 90), Silver
coated
TS46 Assembly of Union Nuts, Thrust Wires and Union Ferrules 3 5 A 60.00
TS48 Technical Specification - Performance of Sockets & Ring Spanners 4 9 A 65.00
TS49 Elastomeric Toroidal Sealing Rings (O rings) Manufacturing & 2 11 A 70.00
Inspection Standards for Aerospace Applications
TS50 Manufacturing & Inspection Requirements for Alloy Steel Jo-Bolt' 6 10 A 65.00
Fasteners
TS53 Manufacturing Specification for Rivet, Blind, Self-Plugging, 2 4 A 55.00

94
Reference Title Edition Pages Status Price

Interference Lock, (Avedel), Corrosion-Resisting Steel


TS54 Performance Specification & Assessment Procedure for 5 10 A 65.00
Elastomeric Toroidal Sealing Rings (Fluorocarbon).
TS55 Installation Specification for Inserts, Screw Thread, Unified Screw 4 14 A 70.00
Locking, Helical Coil, BS HR503
TS57 Recommended Practice for the Identification of Plastics (by 3 9 A 65.00
Labeling)
TS64 Standard Method for Microscopic Evaluation of Hydraulic Fluid 2 8 A 65.00
Samples for Particle Contamination.
TS65 Recommendations on the Adhesive Bonding of Rubbers to other 2 45 A 140.00
Substrates
TS66 Draughting and Part Numbering Procedures for A|D|S Drawings 6 26 A 110.00
TS70 Installation of Inserts, Screw Thread, Unified, Screw Locking, 5 13 I 70.00
Helical Coil, Corrosion Resistant Steel DTD734, Cadmium coated
TS70-AR Amendment Record for TS70 5 2 I 30.00
TS74 Code of Practice for Control of Contamination during Production 8 5 A 60.00
TS76 Standard Method of Hydraulic Fluid Sampling. 2 15 A 75.00
TS77 Recommended Technical Requirements for a General Purpose 3 4 A 55.00
Grade of Fluorocarbon Rubber
TS78 Recommended Technical Requirements for a General Purpose 3 4 A 55.00
Grade of Silicone Rubber
TS79 Recommended Technical Requirements for a General Purpose 3 4 A 55.00
Grade of Ethylene Propylene Rubber.
TS80 Recommendations for the Control of Flammability Testing of Non- 2 3 A 45.00
Metallic Materials and TeNtiles for Aeronautical Purposes
TS81 Performance Specification for Insert, Screw Thread, Metric, Screw 3 9 A 65.00
Locking, Helical Coil, Corrosion Resistant Steel DTD734,
Cadmium plated
TS82 Installation Specification for Insert, Screw Thread, Metric, Screw 5 13 I 70.00
Locking, Helical Coil, Corrosion Resistant Steel DTD734,
Cadmium plated
TS82-AR Amendment Record for TS82 5 1 I 18.00
TS83 Performance Specification for Insert, Threaded, Metric, Solid Wall, 2 11 A 70.00
Self-Locking, Alloy Steel, Cadmium plated
TS84 Installation Specification for Insert, Threaded, Metric, Solid Wall, 2 5 A 60.00
Self-Locking, Alloy Steel, Cadmium plated
TS85 Technical Specification for Lubricating Nipples, Hydraulic, 2 3 A 45.00
Surface-Check type, Metric
TS86 Procurement Test Requirements for Pin, Shear, Headed, Close 3 2 A 30.00
Tolerance, Metric
TS88 Standard Drawing Numbering System and Drawing Format. - - C -
TS93 British Metric Swage Pipe Coupling: Swaging Process 2 37 A 120.00
Specification For AS43022 & 43160 (Nipples) and AS43024 &
43161 Unions (without Jointing Compound)
TS95 A|D|S Recommendations for Metallic Materials Specifications 7 31 A No charge
on A|D|S
website
www.adsgr
oup.org.uk

TS96 Metallic Materials : Tables of Similar Material Specifications 4 44 A No charge


on A|D|S
website
www.adsgr

95
Reference Title Edition Pages Status Price

oup.org.uk
TS97 Recommended Design Guide on Rubber Materials for Aerospace 2 33 A 120.00
Applications
TS100 British Metric Swaged Pipe Coupling (AS 43020 & AS 43090 2 19 A 90.00
Series) Type Approval Test Requirements
TS102 Procurement Document - Shackles, Wire Rope, ISO Diameters 2 2 A 30.00
TS103 Recommendations for Design Considerations for Aircraft 2 6 A 60.00
Hydraulic Systems
TS104 Manufacturing Specification for Gaskets (Metallic Seals) 5 9 A 65.00
TS105 Recommended Standards for Surface Finish (with special 2 3 A 45.00
reference to machine produced surfaces)
TS106 Manufacturing and Inspection Requirements for British Metric 2 15 A 75.00
Swaged Pipe Coupling (AS43020 and AS43090 series)
TS108 Manufacturing Specification for Studs, Bolts and Screws in BS 5 18 A 85.00
S159 Material, 1100 Mpa (159,000 lbf/in) Tensile at Room Temp.
(for which forging is optional & qualification not a requirement)
TS109 Manufacturing Specification for Studs, Bolts and Screws in BS 5 17 A 80.00
HR650, EN2398, EN2399 & EN3639 Material, 900 Mpa (130,000
lbf/in) Tensile at Room Temperature, (for which forging is
optional & qualification not a requirement)
TS110 British Metric Swaged Pipe Coupling : Swaging Process 2 39 A 120.00
Specification for AS43022 & 43160 (Nipples) and AS43024 &
43161 (Unions) (incorporating use of a Jointing Compound)
TS111 Manufacturing and Performance Specification for Rings, Retaining 3 10 A 65.00
Friction Locking
TS112 Manual of Recommended Lofting Procedures 3 18 A 85.00
TS114 A|D|S Guide to Packaging Specifications 2 24 A 95.00
TS115 A|D|S Specification for the Manufacture, Testing & Procurement 2 13 A 70.00
of: Quick Release Pins (Ball Type), Metric
TS116 Code of Practice for Microcopying 2 46 A 140.00
TS117 Manufacturing & Inspection Requirements for Rivet, Blind, Self- 4 14 A 70.00
Plugging, Flush Break, Mechanically Locked Spindle. Aluminium
Alloy (2014 Material)
TS118 A|D|S Packaging Code 2 11 A 70.00
TS120 Technical Specification for AGS2000 Series Stiffnuts (including 5 22 A 95.00
Clinch Nuts) (BA & BSF Threads) for Aircraft
TS121 Manufacturing Specification for Studs, Bolts and Screws in 4 18 A 85.00
DTD5639, EN2959 & EN3220 Material. 1210 Mpa (175,000
lbf/in) Tensile at room temperature (for which forging is optional &
qualification Is not a requirement
TS128 Technical Specification for All Metal Self-Locking Nuts (UNJ 6 38 A 120.00
Threads). 1100 Mpa (160,000 lbf/in) minimum tensile strength at
room temperature
TS129 Performance Specification for All Metal Self-Locking Shaft Nuts 3 29 A 110.00
(Unified Threads). Non-Corrosion Resistant Steel, rated
temperature 350C.
TS134 Technical Specficiation for self retaining Impedance Type Bolts - 4 26 A 110.00
Metric Tensile Strength: 1275 Mpa at ambient temperature, 1065
Mpa at 425C

TS135 Technical Specification for All Metal Self-Locking Nuts (MJ 2 18 A 85.00
Threads) reduced Hexagon, deep counterbored tensile strength:-
1100 Mpa at ambient temperature
TS137 Technical Specification for Self Retaining Impedance Type Bolts 4 27 A 110.00
- Imperial Tensile strength: 1275 Mpa (185,000 lbf/in) at ambient
temperature, 1065 Mpa (154,000 lbf/in) at 425C
TS138 Manufacturing Specification for Inserts, Imperial, Thinwall, Screw 6 21 A 95.00

96
Reference Title Edition Pages Status Price

Locking, (Inconel 718), Silver coated


TS139 Tool Definitions, Wire Thread Inserts - - I -
TS140 Tool Definitions, Wire Thread Inserts - - I -
TS141 Tool Definition for Insert, Screw Thread, Unified, Screw Locking, 4 10 A 65.00
Helical coil, BS HR503
TS143 Financial Influence of Computer Aided Engineering 2 20 A 95.00
TS144 CAE Systems Training 2 4 A 55.00
TS145 Manufacturing Specification for Bolts 1000 MPa (145,000 lbf/in) 4 23 A 95.00
Tensile at Room Temperature
TS146 Technical Specification for the Performance of Insert - Metric, 2 5 A 60.00
Thinwall, Screw Locking, EN2404 (Inconel 718), Silver coated
TS147 Technical Specification for Silicone Elastomer, Glassfibre Fabric 6 10 A 65.00
reinforced Cushion
TS148 Manufacturing Specification for Studs, Bolts and Screws in 4 18 A 55.00
DTD5638, EN2952, EN2961 & EN3219 material, 1275 Mpa
(185,000 lbf/in) tensile at room temperature, (for which forging is
optional and qualification not a requirement)
TS149 Technical Specification for All Metal Self-Locking Nuts (UNJ 2 41 A 140.00
Threads), 1550 Mpa (225,000 lbf/in) minimum tensile strength at
ambient temperature
TS152 Technical Specification for Installation and Removal of Inserts 2 14 A 70.00
Inch Threaded, Thinwall, Short and Long Series
TS153 Performance Specification of Insert Salvage, Imperial, Thinwall 2 23 A 95.00
Screw Locking, Inconel 718, silver coated
TS154 Manufacturing and Inspection Requirements for Rivet, Blind, Self- - - I -
Plugging, Flush Break, visible mechanically locked Stem,
Aluminium Alloys (Note: Should this Spec for the drawings be
resurrected in the future, Qualification Approval shall be required)
TS155 Manufacturing and Inspection Requirements for Rivet, Blind, Self- - - I -
Plugging, Flush Break, visible mechanically locked Stem,
Corrosion Resisting Steel (Note: Should this Spec for the
drawings be resurrected in the future, Qualification Approval shall
be required)
TS156 Performance Specification of Insert Salvage Metric, Thinwall 2 23 A 95.00
Screw Locking, Inconel 718, silver coated
TS157 Aerospace Sector Certification Scheme (ASCS) Requirements - - I -
and Procedures. See below
TS163 AutHextication of the Aerospace Experience of Auditors of Quality - - I -
Systems. See below
TS157 and TS 163 have been superseded by the UK Standard
Operating Procedure for the ASCS programme which is freely
available on the A|D|S website. The UK does not require a
standard to govern this as the UK CBMC (governing committee)
will to invoke AS/prEN/JISQ 9104 directly. The UK SOP
describes the UK interpretation of 9104.
TS167 Technical Specification for the Performance of AMS5689 Safety 2 8 A 65.00
Cables and Ferrules
TS170 Technical Specification for Fibreglass Woven Sleeving and the 5 10 A 65.00
respective Clamp Loop Assemblies
TS172 Performance Specification for Nut, Union, Metric Threaded, Self- 4 24 A 95.00
Locking A286 Dry Film lubricated
TS173 Guidance for Record Retention 2 3 A 45.00
TS175 Specification for Manufacture, Performance & Testing of Quick 2 18 A 85.00
Release pins (Ball Type), Metric
TS200 Qualified manufacturers for ADS Aerospace Industry Standard 39 44 A No charge
Parts (AS, AGS and ESC Series) on A|D|S
website

97
Reference Title Edition Pages Status Price

www.adsgr
oup.org.uk
TS200-AR Qualified manufacturers for A|D|S Aerospace Industry Standard 7 5 A No charge
Parts (AS, AGS and ESC Series) Amendment Record on A|D|S
website
www.adsgr
oup.org.uk
TS201 Method Change Approval for Qualified Parts 5 6 A No charge
on A|D|S
website
www.adsgr
oup.org.uk
TS201-AR Method Change Approval for Qualified Parts Amendment Record 5 2 A No charge
on A|D|S
website
www.adsgr
oup.org.uk
TS202 Qualification Test Requirements & Procedures for Aerospace 12 11 A No charge
Industry Standard Parts. on A|D|S
website
www.adsgr
oup.org.uk
TS202-AR Qualification Test Requirements & Procedures for Aerospace 5 2 A No charge
Industry Standard Parts. Amendment Record on A|D|S
website
www.adsgr
oup.org.uk
TS220 A|D|S Technical Specification for Self Locking Union Nuts (Unified 1 23 A 95.00
Threads) manufactured from INCO718 Material.1270 MPa
(185,000 lbf/in2) minimum Tensile Strength at Room Temperature
TS221 A|D|S Specification for Manufacture, Performance & Testing of 2 17 A 80.00
Quick Release Pins (Ball Type) Imperial
TS250 Manufacturing and Inspection Requirements for Rivet, CRES 1 16 A 75.00
TS251 Manufacturing and Inspection Requirements for Rivet, Al Alloy 1 16 A 75.00
TS260 Metallic Materials Equivalence List of Material Standards Only 4 19 A 90.00
Authorised for Use on A|D|S Standard Parts
TS300 A|D|S Manufacturing Specification for ESC Series of Circular 2 7 A 60.00
Electrical Connectors
TS301 A|D|S Manufacturing Specification for ESC Series Electrical 4 6 A 60.00
Contacts
TS302 A|D|S Manufacturing Specification for ESC Series of Circular 2 5 A 60.00
Electrical Connector Accessories
TS320 Test for Electrical Connectors - Contact Retention 2 1 A 18.00
TS321 Test for Electrical Connectors - Insert Retention 1 1 A 18.00
TS322 Test for Electrical Connectors - Coupling Torque. 2 2 A 30.00
TS323 Test for Electrical Connectors - Dialectic Withstand 1 1 A 18.00
TS324 Test for Electrical Connectors - Insulation Resistance 2 1 A 18.00
TS325 Test for Electrical Connectors - Thermal Shock 1 1 A 18.00
TS326 Test for Electrical Connectors - Low Temperature Handling 1 1 A 18.00
TS327 Vibration - See TS 360 - - I -
TS328 High Temperature Vibration Test - See TS 360 - - I -
TS329 Test for Electrical Connectors Physical Shock 2 2 A 30.00
TS330 Test for Electrical Connectors Dust and Sand Contamination 1 1 A 18.00
TS331 Test for Electrical Connectors Climatic Tests 2 3 A 45.00
TS332 Test for Electrical Connectors High Temperature Cyclic 2 1 A 18.00
Endurance

98
Reference Title Edition Pages Status Price

TS333 Test for Electrical Connectors Corrosion 1 1 A 18.00


TS334 Test for Electrical Connectors Fluid Resistance Test 2 2 A 30.00
TS335 Fire Proof, Firewall See TS370 - - I -
TS337 Test for Electrical Connectors - Environmental Sealing 2 2 A 30.00
TS338 Test for Electrical Connectors - Visual Examination 1 1 A 18.00
TS339 Test for Electrical Connectors - Examination of Dimensions and 1 1 A 18.00
Mass
TS340 Test for Electrical Connectors - Contact resistance Low Current 1 3 A 45.00
(Size 16 and 20 sizes only)
TS341 Test for Electrical Connectors - Contact Resistance at Rated 1 4 A 55.00
Current
TS342 Test for Electrical Connectors - Housing (Shell) Electrical 1 1 A 18.00
Continuity
TS343 Test for Electrical Connectors - Shielding Effectiveness from 100 1 4 A 55.00
MHz to 1 GHz
TS344 Test for Electrical Connectors - Immersion at Low Air Pressure 1 3 A 45.00
TS345 Test for Electrical Connectors - Ozone Resistance TS300 1 1 A 18.00
TS346 Test for Electrical Connectors - Damp Heat - Cyclic Test 1 2 A 30.00
TS347 Test for Electrical Connectors - Hermeticity 1 1 A 18.00
TS348 Test for Electrical Connectors - Thermal Shock (for hermetically 1 2 A 30.00
sealed Connectors)
TS349 Test for Electrical Connectors - Interfacial sealing 1 1 A 18.00
TS350 Test for Electrical Connectors - Contact Engaging & Separating 1 1 A 18.00
Forces
TS351 Test for Electrical Connectors - Test Probe Damage 1 2 A 30.00
TS352 Contact Resistance See TS 340 and TS 341 - I -
TS353 Test for Electrical Connectors - Thermocouple Contacts 1 2 A 30.00
TS354 Load & Temperature (Non Thermocouple Contacts) See TS 340 - I -
and TS 341
TS355 Test for Electrical Connectors - Contact Deformation after 1 2 A 30.00
Crimping
TS356 Test for Electrical Connectors - Contact Bending Strength 1 2 A 30.00
TS357 Test for Electrical Connectors - Restricted Entry 1 1 A 18.00
TS360 Test for Electrical Connectors - Random Vibration 1 5 A 60.00
TS361 Test for Electrical Connectors - Durability of Contact Retention 1 2 A 30.00
Systems and Seals (Maintenance ageing)
TS362 Test for Electrical Connectors - Transverse Load (External 1 2 A 30.00
Bending Moment)
TS363 Test for Electrical Connectors - Mechanical Endurance 1 1 A 18.00
TS364 Test for Electrical Connectors - Contact Insertion and Extraction 1 2 A 30.00
Forces
TS365 Test for Electrical Connectors - Holding Force of Grounding 1 1 A 18.00
Spring System
TS366 Test for Electrical Connectors - Stability of Male Contacts in the 1 2 A 30.00
Insert
TS367 Test for Electrical Connectors - Contact Retention System 1 2 A 30.00
Effectiveness (Removable Contact Walkout)
TS368 Test for Electrical Connectors - Robustness of Protective Cover 1 2 A 30.00
Attachment
TS369 Test for Electrical Connectors - Use of Tools 1 2 A 30.00
TS370 Test for Electrical Connectors - Fire Resistance 1 4 A 55.00

99
Reference Title Edition Pages Status Price

TS371 Test for Electrical Connectors - Electrical Overload 1 2 A 30.00


TS372 Mechanical Strength of Rear Accessories 1 3 A 45.00
TS373 Residual Magnetism 1 1 A 18.00
TS374 Test for Accessory Thread Strength 1 2 A 30.00
TS375 Locking Wire Hole Strength 1 1 A 18.00
TS376 Cable Clamp Effectiveness 1 1 A 18.00
TS377 Test for Silicone Elastomer 1 5 A 60.00
TS378 Testing and Assembly Requirements ESC 61, ESC 62 & ESC 63 1 2 A 30.00

100
ADS Aerospace
Industry Standards

Numerical Index of
Cancelled Standards

101
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

A|D|S AEROSPACE INDUSTRY STANDARDS


NUMERICAL INDEX OF CANCELLED STANDARDS

AGS / AS / RS / ESC / TS

Status Symbols

C Cancelled

N Not Published or Not Available

102
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

AGS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

AGS2--99 -- -- N AGS296-302 -- -- N AGS594 -- -- N


AGS100 2 to 8 -- C AGS303-306 -- -- N AGS598-599 -- -- C
AGS101 -- -- C AGS307-317 -- -- N AGS603 -- -- N
AGS102--103 -- -- N AGS318-319 -- -- N AGS611-612 -- -- C
AGS104 -- -- N AGS320-330 -- -- N AGS613-615 -- -- N
AGS105 -- -- N AGS331-332 -- -- N AGS616-622 -- -- C
AGS106 -- -- C AGS333343 -- -- N AGS623 -- -- N
AGS107 -- -- N AGS344345 -- -- N AGS624-625 -- -- C
AGS108 -- -- C AGS346356 -- -- N AGS766 -- -- N
AGS109 -- -- N AGS357364 -- -- N AGS767 -- -- C
AGS110 -- -- C AGS365 -- -- N AGS768 -- -- N
AGS111--112 -- -- N AGS366 -- -- N AGS769 -- -- C
AGS114--115 -- -- N AGS367-369 -- -- N AGS771 -- -- N
AGS116--119 -- -- C AGS370 -- -- N AGS772-783 1 1 C
AGS121 -- -- N AGS371-380 -- -- C AGS785 -- -- C
AGS122--125 -- -- N AGS381 -- -- N AGS786 -- -- N
AGS126--129 -- -- N AGS382 -- -- N AGS787 -- -- C
AGS130--135 -- -- N AGS383-384 -- -- C AGS788-795 -- -- N
AGS136 -- -- C AGS386-391 -- -- C AGS802 -- -- C
AGS137--149 -- -- N AGS392-394 -- -- N AGS804-807 -- -- C
AGS150--153 -- -- N AGS395-404 -- -- C AGS808 -- -- N
AGS155 -- -- N AGS405-407 -- -- N AGS809 -- -- C
AGS156 -- -- C AGS408-410 -- -- C AGS810-825 -- -- N
AGS158 -- -- N AGS411-422 -- -- N AGS826-832 -- -- C
AGS167 -- -- C AGS423-424 -- -- N AGS833-835 -- -- N
AGS168--178 -- -- N AGS425-435 -- -- C AGS836-837 -- -- C
AGS179--182 -- -- N AGS436-437 -- -- N AGS838 10 of 23 -- C
AGS183--189 -- -- N AGS438-448 -- -- N AGS838 12 of 23 -- C
AGS190--193 -- -- C AGS449 -- -- N AGS838 16 of 23 -- C
AGS196--202 -- -- N AGS450-461 -- -- C AGS838 17 of 23 -- C
AGS203 -- -- C AGS462-463 -- -- N AGS838 18 of 23 -- C
AGS204--205 -- -- N AGS464-474 -- -- N AGS841-843 -- -- C
AGS206 -- -- C AGS475-476 -- -- N AGS844-848 -- -- N
AGS208 -- -- N AGS477-488 -- -- N AGS849-853 -- -- C
AGS210 -- -- N AGS489-493 -- -- C AGS854-855 -- -- N
AGS21l -- -- C AGS494-498 -- -- N AGS856-857 -- -- C
AGS212 -- -- N AGS499 -- -- N AGS860-862 -- -- N
AGS213--214 -- -- C AGS500 -- -- C AGS863-865 -- -- C
AGS215 -- -- N AGS502-505 -- -- C AGS866-869 -- -- N
AGS217--222 -- -- C AGS509-510 -- -- C AGS870-874 -- -- N
AGS223 -- -- N AGS512 -- -- N AGS875-876 -- -- C
AGS225--228 -- -- C AGS517-518 -- -- C AGS877-878 -- -- N
AGS229--231 -- -- N AGS520-531 -- -- N AGS879-880 -- -- C
AGS233--237 -- -- N AGS532-535 -- -- N AGS881-882 -- -- N
AGS238 -- -- C AGS536-547 -- -- N AGS890-891 -- -- C
AGS239--243 -- -- N AGS548-551 -- -- N AGS892 -- -- N
AGS244--249 -- -- C AGS552-553 -- -- N AGS896 -- -- C
AGS254--264 -- -- C AGS554 -- -- C AGS898 -- -- C
AGS265 -- -- N AGS55--557 -- -- N AGS901-903 -- -- C
AGS266--268 -- -- C AGS558 -- -- C AGS906-907 -- -- C
AGS269--274 -- -- N AGS559 -- -- N AGS909 -- -- C
AGS275 -- -- N AGS561-563 -- -- N AGS911 1 3 C
AGS276--279 -- -- C AGS564 -- -- C AGS912 1 7 C
AGS280 -- -- N AGS569-570 -- -- C AGS913 -- -- N
AGS281--282 -- -- C AGS573-574 -- -- C AGS914 1 7 C
AGS283--289 -- -- N AGS577-580 -- -- C AGS915 -- -- N
AGS290-295 -- -- C AGS587-588 -- -- C AGS916 1 7 C

103
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

AGS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

AGS917 -- -- N AGS1565-70 -- -- N AGS3443-498 -- -- C


AGS918 1 3 C AGS1571-72 -- -- C AGS3499 -- -- N
AGS919 -- -- N AGS1573-79 -- -- N AGS3502-99 -- -- N
AGS922-933 -- -- N AGS1580 -- -- C AGS3817 1 12 C
AGS936 -- -- C AGS1581 -- -- N AGS3818 1 12 C
AGS938 -- -- C AGS1584 -- -- C AGS3819 -- -- N
AGS940-943 -- -- C AGS1585-90 -- -- N AGS3916-919 -- -- N
AGS944-945 -- -- N AGS1597-98 -- -- N AGS3926-4669 -- -- N
AGS951 -- -- C AGS1602 -- -- C AGS4679-713 -- -- N
AGS953 -- -- C AGS1604-05 -- -- N AGS4717 3 of 4 -- C
AGS956 -- -- C AGS1607-10 -- -- C AGS4717 4 of 4 -- C
AGS960-962 -- -- C AGS1611 -- -- N AGS4718 3 of 4 -- C
AGS967-969 -- -- C AGS1613 -- -- N AGS4718 4 of 4 -- C
AGS971-973 -- -- C AGS1614 -- -- N AGS4719 3 of 3 -- C
AGS975-976 -- -- C AGS1618 -- - N AGS4720 3 -- C
AGS979 -- -- C AGS1622-23 -- -- N
AGS982-985 -- -- C AGS1626-27 -- -- N
AGS988-994 -- -- C AGS1628 -- -- N
AGS999 -- -- N AGS1629 -- -- C
AGS1003-006 -- -- N AGS1631 -- -- N
AGS1007-009 -- -- C AGS1632-33 -- -- N
AGS1012 -- -- C AGS1637 -- -- C
AGS1013-014 -- -- N AGS1641 -- -- C
AGS1015 -- -- C AGS1642-50 -- -- N
AGS1016 -- -- N AGS1659 -- -- N
AGS1017 -- -- C AGS1679-80 -- -- N
AGS1018-099 -- -- N AGS1682 -- -- N
AGS1127 -- -- C AGS1692 -- -- N
AGS1141 -- -- C AGS1698-702 -- -- N
AGS1150-151 -- -- C AGS1707-709 -- -- C
AGS1152 -- -- N AGS1717-721 -- -- N
AGS1154-159 -- -- C AGS1728 -- -- C
AGS1161 -- -- N AGS1730 -- -- N
AGS1179-181 -- -- C AGS1736 -- -- C
AGS1188 -- -- C AGS1742-743 -- -- C
AGS1189-192 -- -- N AGS1750-751 -- -- N
AGS1202-209 -- -- N AGS1752 -- -- C
AGS1210 -- -- C AGS1755 -- -- N
AGS1221-228 -- -- N AGS1758 -- -- N
AGS1240-499 -- -- N AGS1768-1999 -- -- N
AGS1501-509 -- -- C AGS2000 4 - 10 -- C
AGS1510 -- -- N AGS2022 -- -- C
AGS1525-526 -- -- C AGS2024-029 -- -- N
AGS1529 -- -- C AGS2030 1 - 12 6 C
AGS1532-533 -- -- C AGS2031 1 - 12 6 C
AGS1535 -- -- C AGS2032-033 -- -- N
AGS1539 -- -- N AGS2057-058 -- -- N
AGS1540 -- -- C AGS2061-064 -- -- N
AGS1543-544 -- -- C AGS2075-079 -- -- N
AGS1545 -- -- N AGS2102-103 -- -- N
AGS1546-548 -- -- C AGS2121-3004 -- -- N
AGS1549-550 -- -- N AGS3008-011 -- -- N
AGS1552 -- -- N AGS3015 -- -- N
AGS1553 -- -- C AGS3019 -- -- N
AGS1554-557 -- -- N AGS3100-400 -- -- N
AGS1559 -- -- C AGS3416-419 -- -- C
AGS1563 -- -- C AGS3428 -- -- N

104
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

AS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

AS115 -- -- C AS1718 -- -- N AS2165 -- -- C


AS118 -- -- C AS1727 -- -- N AS2168 -- -- C
AS121 -- -- C AS1839 -- -- N AS2169 -- -- N
AS126 -- -- C AS1853 -- -- N AS2172 -- -- N
AS131 -- -- C AS1882 -- -- N AS2173 -- -- N
AS132 -- -- C AS1783 -- -- N AS2233 -- -- C
AS137 -- -- C AS1793 -- -- N AS2234 -- -- C
AS138 -- -- C AS1883 -- -- N AS2235 -- -- N
AS141 -- -- C AS1884 -- -- N AS2238 -- -- N
AS142 -- -- C AS1885 -- -- N AS2240 -- -- C
AS143 -- -- C AS1912 -- -- C AS2241 -- -- C
AS146-148 -- -- C AS1916 -- -- C AS2243 -- -- C
AS150 -- -- C AS1917 -- -- C AS2245 -- -- C
AS151 -- -- C AS1919 -- -- C AS2248 -- -- C
AS199 -- -- N AS1928 -- -- C AS2253 -- -- C
AS401 -- -- C AS1929 -- -- C AS2258 -- -- C
AS406 -- -- C AS1932 -- -- C AS2259 -- -- C
AS412 -- -- C AS1935 -- -- C AS2262 -- -- C
AS417-419 -- -- C AS1936 -- -- C AS2263 -- -- C
AS430 -- -- C AS1949 -- -- C AS2265 -- -- C
AS434 -- -- C AS1950 -- -- C AS2266 -- -- C
AS436-438 -- -- C AS1962 -- -- C AS2267 -- -- C
AS453 -- -- C AS1964 -- -- N AS2276 -- -- C
AS456 -- -- C AS1966 -- -- N AS2287 -- -- C
AS461 -- -- C AS1967 -- -- C AS2290-2291 -- -- C
AS464 -- -- C AS1968 -- -- C AS2319 -- -- N
AS550-599 -- -- N AS1969 -- -- N AS2401 -- -- N
AS700-749 -- -- N AS1970 -- -- C AS2413 -- -- N
AS800-849 -- -- N AS1973 -- -- N AS2423 -- -- C
AS850 -- -- C AS1974 -- -- N AS2433 -- -- N
AS851 -- -- C AS1991 -- -- N AS2468 -- -- N
AS853 -- -- C AS2005 -- -- C AS2496-2503 -- -- N
AS854 -- -- C AS2061 -- -- C AS2503 -- -- N
AS857 -- -- C AS2062 -- -- N AS2518 -- -- C
AS858 -- -- C AS2065 -- -- C AS2521 -- -- C
AS859 -- -- C AS2066 -- -- C AS2522 -- -- C
AS863-865 -- -- C AS2067 -- -- C AS2526 -- -- C
AS871 -- -- C AS2069 -- -- C AS2537 -- -- C
AS880 -- -- N AS2072 -- -- C AS2538 -- -- C
AS890 -- -- N AS2079 -- -- C AS2539 -- -- C
AS894 -- -- C AS2088 -- -- C AS2561 -- -- C
AS895 -- -- C AS2090 -- -- C AS2566 -- -- N
AS896 -- -- C AS2094 -- -- C AS2596 -- -- C
AS899 -- -- N AS2095 -- -- C AS2597 -- -- C
AS900-1142 -- -- C AS2096 -- -- C AS2600 -- -- C
AS1143-1150 -- -- C AS2101 -- -- C AS2799 -- -- C
AS1164-1178 -- -- N AS2109 -- -- C A52828 -- -- C
AS1179 -- -- N AS2115 -- -- N AS2836 -- -- N
AS1229 -- -- N AS2119 -- -- N AS2837 -- -- N
AS1236 -- -- N AS2120 -- -- C AS2838 -- -- N
AS1239 -- -- N AS2123 -- -- C AS2901 -- -- C
AS1250 -- -- N AS2126 -- -- C AS2930 -- -- C
AS1517 -- -- N AS2127 -- -- C AS2935 -- -- C
AS1528 -- -- N AS2129 -- -- N AS2937 -- -- N
AS1584 -- -- N AS2131 -- -- N AS2957 -- -- C
AS1606 -- -- N AS2139 -- -- N AS2960 -- -- C
AS1662 -- -- N AS2146 -- -- N AS2962 -- -- C
AS1672 -- -- N AS2159 -- -- N AS2968 -- -- C

105
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

AS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

AS2971 -- -- C AS4579 -- -- N AS6211 -- -- C


AS2972 -- -- C AS4582 -- -- N AS6212 -- -- C
AS2974 -- -- C AS4583 -- -- N AS6224 -- -- C
AS2975 -- -- C AS4584 -- -- N AS6242 -- -- C
AS2983 -- -- C AS4601 2 5 C AS6243 -- -- C
AS2984 -- -- C AS4614 -- -- C AS6244 -- -- C
AS2986 -- -- C AS4626 -- -- C AS6272 2 -- C
AS2987 -- -- C AS4627 -- -- N AS6292 -- -- N
AS2988 -- -- C AS4628 -- -- C AS6293 -- -- N
AS2990 -- -- C AS4629 -- -- N AS6294 -- -- N
AS2997 -- -- C AS4637 -- -- C AS6297 2 -- C
AS3002 -- -- C AS4638 -- -- C AS6327 -- -- C
AS3072 -- -- N AS4650 1 5 C AS6328 -- -- C
AS3080-3089 -- -- C AS4651 1 4 C AS6353 -- -- N
AS3090 -- -- N AS4652-57 1 4 C AS6355 -- -- C
AS3103 -- -- N AS4658-66 1 2 C AS6356 -- -- C
AS3106 -- -- N AS4667 -- -- N AS6620 -- -- N
AS3120 -- -- C AS4668 -- -- N AS6630 -- -- N
AS3150 -- -- C AS4669 -- -- N AS6675 -- -- N
AS3151 -- -- C AS4700 2 5 C AS6679 -- -- N
AS3169 -- -- N AS4716 -- -- C AS6697 -- -- N
AS3182 -- -- N AS4717 -- -- N AS6708 -- -- C
AS3193 -- -- N AS4724 -- -- N AS6718 -- -- N
AS3198 -- -- C AS4732 -- -- C AS6719 -- -- N
AS3204 -- -- C AS4735 -- -- C AS6740 -- -- N
AS3206 -- -- N AS4757 -- -- N AS6741 -- -- N
AS3207 -- -- N AS4758 -- -- N AS6751 -- -- N
AS3209 -- -- N AS4759 -- -- N AS6757 -- -- N
AS3219 -- -- N AS4763 -- -- N AS6805 -- -- N
AS3246 -- -- N AS4797 -- -- N AS6849 -- -- N
AS3249 -- -- N AS4798 1 2 C AS6940 -- -- N
AS3275 -- -- N AS4801-04 1 4 C AS6984 -- -- N
AS3280 -- -- N AS4826 -- -- N AS7078 -- -- N
AS3299 -- -- N AS4829 -- -- N AS7122 -- -- N
AS3307 -- -- N AS4878 -- -- N AS7216 -- -- N
AS3308 -- -- N AS4879 -- -- N AS7263 -- -- N
AS3309 -- -- N AS4921 2 4 C AS7309 -- -- N
AS3329 -- -- N AS4934 2 4 C AS8438 -- -- N
AS3340 -- -- N AS4961 -- -- N AS8450 -- -- N
AS3349 -- -- N AS5338 -- -- N AS8593 -- -- C
AS3359 -- -- N AS5355 -- -- N AS8594 -- -- C
AS3361 -- -- N AS5361 -- -- N AS8599 -- -- C
A53372 -- -- N AS5385 -- -- C AS8613 -- -- N
AS3373 -- -- C AS5400 -- -- C AS8622 -- -- N
AS3395 -- -- N AS5401-16 1 7 C AS8635 -- -- N
AS3396 -- -- N AS5417 -- -- N AS8645 -- -- N
AS4000-4499 -- -- C AS5424 -- -- N AS8647 -- -- N
AS4499 -- -- C AS5425 -- -- C AS8648 -- -- C
AS4512-4520 -- --- N AS5427 -- -- C AS8649 -- -- C
AS4520 -- --- N AS5430 -- -- C AS8667 -- -- C
AS4529 -- -- N AS5437 -- -- N AS8670 -- -- N
AS4530 -- -- C AS5438 -- -- N AS8675 -- -- N
AS4545 -- -- C AS5478 -- -- N AS8678 -- -- N
AS4546 -- -- N AS5549 -- -- N AS8684 -- -- N
AS4547 -- -- N AS6204 -- -- C AS8689 -- -- N
AS4548 -- -- N AS6205 -- -- C AS8700 -- -- N
AS4557 -- -- N AS6206 -- -- C
AS4560 -- -- C AS6209 -- -- N
AS4570 9 -- C AS6210 -- -- C

106
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

AS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

AS10699 -- -- N AS43004-12 -- -- N
AS10702 -- -- N AS25413 -- -- N AS43015-19 -- -- N
AS12799 -- -- N AS25999 -- -- N AS43028-29 -- -- N
AS12802 -- -- N AS26050 -- -- N AS43033 -- -- N
AS12809 -- -- N AS26069 -- -- N AS43035 -- -- N
AS12960 -- -- N AS26075 -- -- N AS43050-43060 -- -- C
AS12979 -- -- N AS26079 -- -- N AS43066-43067 -- -- C
AS12999 -- -- N AS26085 -- -- N AS43073-43079 -- -- N
AS14200 -- -- N AS26089 -- -- N AS43092 -- -- N
AS14499 -- -- N AS27300-49 3 of 4 -- C AS43094 -- -- N
AS15712 -- -- N AS27300-49 4 of 4 -- C AS43096 -- -- N
AS15719 -- -- N AS27450 -- -- N AS43106-43111 -- -- C
AS15744 -- -- N AS27464 -- -- N AS43112-43119 -- -- N
AS15759 -- -- N AS27800 -- -- N AS43120 -- -- C
AS15762 -- -- N AS27819 -- -- N AS43121-30 -- -- N
AS15765 -- -- N AS27820-29 3 of 3 -- C AS43131-32 -- -- C
AS15770 -- -- N AS27833 -- -- N AS43134-38 -- -- N
AS15775 -- -- N AS27849 -- -- N AS43153 -- -- C
AS15788 -- -- N AS27850-99 4 of 4 -- A AS43139-41 -- -- C
AS15788 -- -- N AS27950 -- -- N AS43143-149 -- -- N
AS15848 -- -- N AS27999 -- -- N AS43150-151 -- -- C
AS15799 -- -- N AS28011 -- -- N AS43153 -- -- C
AS16800-999 -- -- N AS28012 -- -- N AS43154 -- -- N
AS20619 -- -- N AS28020 -- -- N AS43156-158 -- -- C
AS20620-639 3 of 3 -- C AS28099 -- -- N AS43162-169 -- -- N
AS20767 -- -- N AS28700-949 -- -- N AS43172 -- -- N
AS20799 -- -- N AS28960-99 -- -- N AS43174-175 -- -- N
AS22300 -- -- N AS32005 -- -- N AS43179 -- -- N
AS22399 -- -- N AS32099 -- -- N AS44400 -- -- N
AS22800 -- -- N AS32700 -- -- N AS44418-440 -- -- N
AS22899 -- -- N AS36499 -- -- N AS44446-519 -- -- N
AS23300-399 -- -- N AS36800 -- -- N AS44524-679 -- -- N
AS23800 -- -- N AS40599 -- -- N AS44681-90 -- -- N
AS23899 -- -- N AS40600-49 3 of 3 -- C AS44697-700 -- -- N
AS24300 -- -- N AS40650 -- -- N AS44703-707 -- -- N
AS24399 -- -- N AS40659 -- -- N AS44715-724 -- -- N
AS24800 -- -- N AS40676 -- -- N AS44726-749 -- -- N
AS24899 -- -- N AS40829 -- -- N AS44754-799 -- -- N
AS25302 -- -- N AS40830 -- -- C AS44818-859 -- -- N
AS25309 -- -- N AS40990 -- -- C AS44870-699 -- -- N
AS25312 -- -- N AS40991 -- -- N AS46710-711 -- -- N
AS25319 -- -- N AS41086 -- -- N AS46717-719 -- -- N
AS25323 -- -- N AS41095 -- -- N AS46720-722 3 of 3 -- C
AS25329 -- -- N AS41096 -- -- N AS46723-724 -- -- N
AS25333 -- -- N AS41098 -- -- N AS46725-727 3 of 3 -- C
AS25339 -- -- N AS41099 -- -- N AS46728-729 -- -- N
AS25343 -- -- N AS41110 -- -- N AS46743 -- -- N
AS25349 -- -- N AS41899 -- -- N AS46750-759 -- -- N
AS25353 -- -- N AS41904 -- -- N AS46770 -- -- N
AS25359 -- -- N AS41909 -- -- N AS46784-785 -- -- C
AS25363 -- -- N AS41916 -- -- N AS46786-787 -- -- C
AS25369 -- -- N AS42459 -- -- N AS46788 3 of 3 -- C
AS25373 -- -- N AS42699 -- -- N AS46789 3 of 3 -- C
AS25385 -- -- N AS42800 -- -- N AS46790 3 of 3 -- C
AS25388 -- -- N AS42909 -- -- N AS46791 3 of 3 -- C
AS25395 -- -- N AS42916 -- -- N AS46793-740 -- -- N
AS25398 -- -- N AS42950 -- -- N AS47763-765 -- -- N
AS25403 -- -- N AS42952-79 -- -- N AS47811-815 -- -- N
AS25409 -- -- N AS43001-02 -- -- N AS47837-840 -- -- N

107
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

AS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

AS47849-47850 -- -- N
AS47859-47860 -- -- N
AS47869-47870 -- -- N
AS47893-47895 -- -- N
AS47918-47920 -- -- N
AS47941-47945 -- -- N
AS47967-47970 -- -- N
AS47979-47980 -- -- N
AS47989-47990 -- -- N
AS47999-48013 -- -- N
AS47989-990 -- -- N
AS48100-48115 -- -- N
AS48200-48217 -- -- N
AS48300-48319 -- -- N
AS51100-51999 -- -- N
AS51100-51999 -- -- N
AS52781-52789 -- -- N
AS52991-53760 -- -- N
AS54371-54380 -- -- N
AS54391-54460 -- -- N
AS54465-54469 -- -- N
AS54474-54499 -- -- N
AS55100-55199 -- -- N
AS55204-459 -- -- N
AS55490-499 -- -- N
AS57700-799 -- -- N
AS62000-119 -- -- N
AS62170-199 -- -- N
AS62235-249 -- -- N
AS62285-299 -- -- N
AS62375-402 -- -- N
AS62441-499 -- -- N
AS62535-569 -- -- C
AS62570-599 -- -- N
AS62635-699 -- -- N
AS62743-799 -- -- N
AS62843-899 -- -- N
AS63240-245 -- -- C
AS63246-249 -- -- N
AS63250-255 -- -- C
AS63260-261 -- -- C
AS63270-271 -- -- C

108
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

RS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

RS 19-30 -- -- N RS 273-298 -- -- N RS 624-677 -- -- N


RS 43-50 -- -- N RS 315 -- -- N RS 687-695 -- -- N
RS 79-90 -- -- N RS 322 -- -- N RS 703 -- -- N
RS 117 -- -- N RS 339 -- -- N RS 705-708 -- -- N
RS 120-126 -- -- C RS 347-399 -- -- N RS 710-711 -- -- N
RS 140-176 -- -- N RS 400 -- -- C RS 714 10 of 20 -- N
RS 177 -- -- C RS 401-402 -- -- N RS 714 13 of 20 -- N
RS 180-181 -- -- C RS 416 -- -- N RS 714 15 of 20 -- N
RS 184 -- -- C RS 423-427 -- -- N RS 714 18 of 20 -- N
RS 187-191 -- -- C RS 431 -- -- N RS 725 -- -- N
RS 192 -- -- C RS 439 -- -- N RS 731 -- N
RS 203-207 -- -- C RS 447-500 -- -- N RS 732 2-26 - C
RS 212 -- -- C RS 522-537 -- -- N RS 737 -- -- N
RS 213 -- -- N RS 539-541 -- -- N RS 738 -- -- N
RS 215-216 -- -- C RS 544-559 -- -- N RS 739 -- -- N
RS 218-249 -- -- C RS 595-599 -- -- N RS 744 -- -- N
RS 252-254 -- -- N RS 601-604 -- -- N
RS 257-262 -- -- N RS 606-609 -- -- N
RS 272 -- -- N RS 615 -- -- N

ESC
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

ESC 11 - 29 -- -- N
ESC 31 - 49 -- -- N
ESC 54 - 60 -- -- N
ESC 64 -- -- N
ESC 68 - 71 -- -- N

TS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

TS1 -- -- C TS16 -- -- C TS36 -- -- C


TS5 -- -- C TS18 -- -- C TS37 -- -- C
TS6 -- -- N TS19 -- -- C TS38 -- -- C
TS7 -- -- C TS20 -- -- C TS39 -- -- C
TS10 -- -- C TS28 -- -- C TS42 -- -- N
TS11 -- -- C TS29 -- -- C TS43 -- -- N
TS12 -- -- C TS30 -- -- C TS44 -- -- N
TS13 -- -- C TS31 -- -- C TS51 -- -- C
TS14 -- -- C TS32 -- -- C TS52 -- -- C
TS15 -- -- C TS33 -- -- C TS56 -- -- C
TS34 -- -- C TS58 -- -- C
TS35 -- -- C TS59 -- -- C

109
A|D|S AEROSPACE INDUSTRY STANDARDS
NUMERICAL INDEX OF CANCELLED STANDARDS

TS
Number Sheet Issue Status Number Sheet Issue Status Number Sheet Issue Status

TS60 -- -- C TS107 -- -- C TS155 -- -- C


TS61 -- -- C TS113 -- -- C TS157 -- -- C
TS62 -- -- C TS119 -- -- C TS158 -- -- R
TS63 -- -- C TS122 -- -- N TS160 -- -- N
TS67 -- -- C TS123 -- -- N TS161 -- -- N
TS68 -- -- C TS124 -- -- N TS162 -- -- N
TS69 -- -- C TS125 -- -- N TS168 -- -- C
TS71 -- -- C TS126 -- -- N TS169 -- -- C
TS72 -- -- C TS127 -- -- N TS171 -- -- C
TS73 -- -- C TS130 -- -- N TS174 -- -- C
TS75 -- -- C TS131 -- -- N
TS87 -- -- C TS132 -- -- N
TS88 -- -- N TS133 -- -- C
TS89 -- -- C TS136 -- -- C
TS90 -- -- C TS139 -- -- C
TS91 -- -- C TS140 -- -- C
TS92 -- -- N TS142 -- -- C
TS98 -- -- C TS150 -- -- C
TS99 -- -- C TS151 -- -- C
TS101 TS154 -- -- C

110

You might also like