Professional Documents
Culture Documents
Time Tested
Foster Cold Stores is serving the refrigeration needs of the food processing industry, agriculture and
hospital industry according to international standards with the support of highly qualified team of
expert to meet the need of customer before and after completion of projects.
Customizable
Foster Cold Stores believes in a simple motto: "Any Project Any Size, Any
Where! No job is too big or too small for us.
Turn-Key provider
Foster Cold Store is a true "Turn-Key" provider for the cold storage and food
processing industry.We maintain long term relation with our customer buy
providing them excellent package of after sale services.
Foster has been maintaining its record of manufacturing the strongest walk-in coolers by using the heaviest metal. Foster is using 24-
gauge galvanized steel sheets that are white polyester powder-coated.
Galvanized Steel Sheets With 120-micron Polyester Paint Vs. 10 Micron Powder Coated Steelz
Foster Cold Store is the only company in Pakistan that is using the most modern technology of galvanized steel sheets with a 120-
micron powder coating. Polyester powder paint is electro-statically applied to the galvanized steel sheets and then baked at 230 C.
This process not only increases the life of coolers 5 times but also gives an elegant white textured look to the coolers. Most of the
companies are using 10 to 20 micron pre-panted steel which can be rusted with a little scratch.
No Wood In Door, Frame And Floors
Most companies are still using the old technology of placing small pieces of wood and plywood inside the door and doorframe for
various purposes. In a permanently moist environment, deterioration, bending, and expansion of wood starts after some time and
customers are forced to replace the doors within few years.
Fiberglass Instead of Plastic
Most companies are using metal and plastic in the manufacturing of doors and frames (door jambs and plugs), whereas Foster is using
metal and fiberglass, which is most hi-tec thermal breaker in the industry. Fiberglass reduces the thermal conductivity to the best
level. Additionally, the strength of fiberglass is many times more than that of plastic.
Space Shuttle Insulation Vs Coffee Cup Insulation
NASA is using Polyurethane in space shuttles as an insulation material .Foster is also using polyurethane in manufacturing of walk-in
coolers and freezers. Whereas most of the new companies are using cheap insulation material called polystyrene (AK-Green Dot EPS),
which is most commonly used as packaging material or in manufacturing of coffee cups. With the lowest k-factor and the highest R-
value, polyurethane foam can provide more thermal resistance than any other insulation material on earth. These values are
confirmed by the US Department of Energy and disprove all the misconceptions. A brief comparison of both materials is available at
http://www.sipsupply.com/r-control_sips.html
ADVANTAGES
Foster Cold Stores is aware of the every changing need for quality control during the food
preparation process, which is why we continue to educate ourselves on changing international
standards. We want you, our client, to feel and know that your facility is designed and constructed to
the highest food-grade quality possible!
Give us a call and let our experienced experts help with your next project!
Foster Cold Stores is aware of the every changing need for quality control during the food
preparation process, which is why we continue to educate ourselves on changing international
standards. We want you, our client, to feel and know that your facility is designed and constructed to
the highest food-grade quality possible!
PRODUCTS
Walk-in Coolers & Freezers
These units are the humble beginnings of Foster Cold Stores and continues to be a major
focus of our market segment. Foster Cold Store has been instrumental in advancing the
design and construction methods for Walk-in Units. We continue to refine our
manufacturing process and keep most refrigeration equipment for Walk-in Units in-stock,
all to shorten the turn around time of your order. We have become so deeply efficient in
this process that we have been able to provide and install most Walk-in units within days
of the order.
This is a unique market segment with specialized requirements and specifications. Fortunately, Foster Cold
Stores has innate knowledge of this industry. We have been providing refrigerated and heated walk-in
units for this market ever since we began manufacturing insulated panels.
Foster Cold Stores can also provide Environmental Test Chambers, Pharmaceutical Cold Storage and
Rooms Accelerated Weather Testing Vaults.Our test chambers and vaults can operate at temperatures as
low as -40Celsius (-40F) and as high as +85 Celsius (+185F).
PRODUCTS
Vaccine refrigerators and freezers for medical industry
Foster is manufacturing all kinds of vaccine refrigerators, ice
liners and cold stores for medicine industry following WHO &
UNICEF standards.
PRODUCTS
Vaccine Cold Room
Model SAN 199
DIMENSIONS 8' (L) X 10' (W) X 10' (H)
VOLTS 380-420 THREE PHASE
FREQUENCY 50 HZ
REFRIGERANT COPELAND BRAND
CONDENSING UNIT GALVANIZED STEEL SHEET
120 MICRON PRE PAINTED
METAL FINISH B2 FIRE RESISTANCE GRADE CFC
FREE POLYURETHANE 4" THICK
INSULATION TONGUE & GROOVE SANDWICH
PANELS WITH PERMANENT
CAM LOCK SYSTEM AND PVC GASKET
PANELS FOR AIR TIGHT STRUCTURE.
Width 600mm
Length 1560mm
Height 850mm
Volts 220
Frequency 50Hz
Refrigerant R134-A or 404-A
Capacity 252 Liter
Icepack basket WHO/UNICIF standard
Extenal Volume 800 liter
PRODUCTS
Polyurethane Insulated Panels For Prefabricated Buildings
Foster is manufacturing Polyurethane insulated sandwich panels in collaboration with Izhar Group which is the largest manufacturer of prefabricated buildings
in Pakistan.
Roof Panel
HIGH RIB OUTER SKIN PANEL
Wall Panel
LOW RIB OUTER SKIN PANEL
Roof and Wall Cladding Chose Huge production capacity, near-immediate delivery
Environment friendly blowing agent
Thermofab
Partitions for Commercial & Industrial Purpose Green products: Better than average insulation values,
less carbon-emission, highly recyclable
Cold Rooms
Fire-resistant panels (B2 Fire Rated)
Food Processing Areas Low thermal conductivity
Easy to Handle
Residential Purpose
Noise Retardant
Equipment Rooms Easy to Install
One Step Solution
Chemical Storage Rooms
Excellent Customer Support
High Occupancy Areas, Clean Rooms In House Design and R&D
Client Inspection
Stringent Code Compliance
No hidden Cost
After Sales Services
PRODUCTS
Telecom Shelters
Some of our valued customers for telecom shelters are Warid, Wateen, Ericsson, Siemens, Alcatel Lucent and Wincom.
VALUED CUSTOMERS
Listed below are the names of some of our International
customers.
Siemens (Telenor)
Warid Telecom (Pvt) Ltd
Wateen Telecom (Pvt) Ltd
Wincom (Pvt) Ltd
Alcatel Lucent Pakistan limited Ericsson Pakistan Limited
PVC Gasket instead of Silicon (International standard to keep the electric bill at same level)
A bulb type PVC gasket is molded into the foam on all male panels which creates a permanent airtight and water proof seal without the need of silicon. It has
been proved in the international market that filling of silicon in between panels is a temporary measure to keep the shelter airtight. Over the period of time,
direct sunlight dries out the silicon and tiny holes are created. These holes cause a continuous leakage of cooling from the shelter and the electric bill keeps going
up with the age of shelter. No other manufacturer in Pakistan is using PVC gasket due to which their customers will be losing money on operational cost in long
the run.
Diaphragmatic cam-lock system. (International Standard) Interconnected by steel strip structure all around
the shelter can resist wind storm. Other manufacturers are using the following two techniques for the assembly of shelters:
(a)Riveting system, in which all wall, ceiling and floor panels are assembled by using thousands of rivets.(b)Floating cam-lock system, in which cam-locks are
floating in polyurethane foam and the use of a little extra force during assembly can pull the locks out of the panels. There is no solid support that can hold the
cam-locks securely in case of wind storm.
The Foster diaphragmatic cam-lock system is bolstered by steel strips welded between male and female cam-locks in all panels, before injection of polyurethane.
When assembling of all the panels is completed, the entire shelter is interconnected by metal strip structure through diaphragmatic cam-lock system. This gives
extra strength to the entire structure of the shelter and enables it to sustain a wind velocity of 200 km/hour with ease.
Floors can take more load than any other Shelter manufacturer
Foster floors are insulated with polyurethane and small wooden blocks. The bottom of the floor is 120-micron pre-painted steel sheet. Wooden blocks are
placed on top of the metal sheet at equal distances. Size of each block is 3 x 4. A 19 mm marine plywood sheet is placed on the top of these wooden blocks,
which makes a 75 mm empty space in between the bottom metal sheet and the plywood. Polyurethane is injected into the floor to fill the space. The wooden
blocks and the polyurethane insulation together support the plywood. This way, the floor can take a load of 2000 lb/m3 with an ease. In some of the local and
imported shelters being used in Pakistan, only 19 mm plywood is used in the floors. No polyurethane insulation is used to support the plywood. If heavy
equipment is placed on this kind of floor for a long period of time, it can cause settlement of floor, which can lead to serious damages.
Quick assembly
Foster shelters can be erected within approximately 6 hours using the speed-lock system. Since other manufacturers are using rivets also for assembly, it takes
much longer to assemble the shelter.
Refrigerated Vehicles
Foster is using the most modern technology of manufacturing the latest
structure for refrigerated vehicles this lighter structure help our customer to
transport more weight and also increase the life of vehicle.
PRODUCTS
Specifications for Cold Stores:
Panel Fabrication:
Wall, ceiling and floor panels are 1ft to 5ft in width and are interchangeable with like panels. Length of panels can be up to 40ft.
Foster is capable of manufacturing 30mm thick panels to 300mm thick panels. Panels are made of foamed-in-place polyurethane
insulation, sandwiched between interior and exterior metal skins which is die formed and gauged for uniformity in size. All panels are
built to NSF specifications.
Aluminum Floors
Floors are designed to readily withstand a uniformly distributed load of 700 lb per sq ft. In the manufacturing of floor. 2.5mm
Aluminum sheet is used on the top of four inches polyurethane insulation. In case no floor is required, then a 4" high screed is
provided. Screeds are nailed or screwed to the floor through the center during assembling.
PVC Gaskets
To keep the cooler airtight and dust proof, PVC gaskets are foamed in place to the male sides of the panels, on both the interior and
the exterior.
Health Department KPK 33 Medicine & Vaccine Cold Stores Mr. Saeed 0321-912-5801
Health Department KPK Government 1100 Vaccine Refrigerators & Freezers Mr.Saeed 0321-912-5801
Flatties Hotel Lahore 6 Cold Stores Mr. AnjumIqbal 0302-8469072
Fruit & Vegetable Market Kahna ,Lahore GOP 3,00,000 sq.ft panels
Huma Cash & Carry, Lahore Central Park 80,000sq.ft panels
Alcatel Lucent Pakistan Limited 400 telecom Shelters Mr. Sher Mohammad 0300-5550561
Wateen Telecom (pvt) Ltd. 35 Telecom Shlters Mr.Ashiq 042-111-999-919
Sky Frozen Food Gilgit. 2 Cold Stores Bashir Ahmed 0300-8569587
Anis Associates Slaughter House 5 Cold store and Blast Freezers Dr. AzmatSaifi 0333-4606473
Bar B Q Tonight MM Alam Road Lahore 2 Cold Store Mr. AnjumIqba :0302-8469072
Ikan Engineering(pvt)Ltd. Lahore. Passenger Tunnel for Sialkot Airport Mr.Hashim 042-35380462-4
National Development Complex Islamabad Fire proof doors for Cold Stores for
sensitive installations. Mr. Waseem
Bahria Town Muree Road Club 2 Cold Stores
DHA Islamabad Club 4 Cold Stores
FEW OF OUR VALUABLE CLIENTS
Client Name Product Delivered Contact Person
Hotel Park Plaza Lahore 5 Cold stores, 2 Freezer rooms AnjumIqbal : 03028469072
Pakistan Army 20,000 sq.ft panels
Nazria-e-Pakistan Trust 18,000 sq.ft Panels
Riaz Bottlers 3000 sq.ft panels
Inter Market(pvt)Ltd. 5,000 sq.ftpanels
Ericson Pakistan(Pvt)Ltd 45 Telecom Shelters HabiburRehman 051-2800231
CMH Muzafarabad One Cold store
Multiline Engineering 300 insulated Telecom Cabinets Mr.Amir 0300-4263185
Noodle House Lahore 2 cold Stores
Hotel One Lahore & Hotel One Wazirabad 2 Cold store One freezer Pakeeza Engineering 042-35751751
Phone: 92-42-35141320 to 22 Fax: 92-42-35141323
E-mail: fosterpakistan@aol.com
Web: www.fostercoldstore.com, www.fosterprefab.com