Professional Documents
Culture Documents
On a tanker vessel,
what is the required
combined capacity of
the inert gas generating
C11 system as compared to 1.25
the total capacity of all
the cargo pumps which
can be operated
simultaneously?
What percent of oxygen
content by volume,
must each inert gas
C11 system be designed to 5% or less
supply the cargo tanks
with a gas, or mixture
of gases?
A vessel which is
C11 subjected to hogging Has its main deck plating under tensile stress.
_____.
Corrosion resistant
material and non-
corrodible material will
C11 include which of the I, II & III
following _____. I.
Plastics II. Silver III.
Copper nickel
Which of the following
methods of finished
applications is/are
considered to be
satisfactory for resisting
C11 I, II & III
corrosion? I.
Electroplating with
cadmium II
Sherardizing III.
Galvanizing
Corrosion resistant
material and non-
corrodible material will
include which of the I, II & III
following _____. I.
Brass II. Copper nickel
III. Plastics
The blowers of an inert
gas generation system
aboard a tanker, will be
automatically secured if
C11 _____. I. Normal water I, II & III
supply at the water seal
is lost II. The
temperature of the inert
gas being delivered to
WHAT HAPPENS
WHEN YOU ADD
reduce reserve buoyancy
WEIGHT TO A
C11 VESSEL
what will be the result
of counter flooding into
empty tanks, if the
decrease list or trim
couse of severe list, or
trim is due to off-center
C11 ballast
Flooding of any ships
compartment, resulting
in a serious loss of
c11 decrease ship stability
reserve buoyancy, will
always
________________.
Stability is determined
principally by the
location of two points in
center of gravity
a vessel: The center of
buoyancy and the
________________.
When a vessel is
inclined, the tendency
for it to return to its movement of the center of buoyancy toward the
original position is low side of the vessel
caused by the
_______________.
The collision bulkhead As the first watertight bulkhead aft of the bow in
is located _____. the ship
Penetrations and
openings in watertight
bulkheads in a vessel Be kept as high and as far inboard as practicable.
of less than 100 gross
tons must _____.
Vertical support
members used to
Stiffeners
strengthen bulkheads
are called _____.