Professional Documents
Culture Documents
LSS and
the Instrument
Interface to
1. Session 1
2. Session 2
3 Session 3
4 Session 4
Conclusion
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 2 of 58
Introduction
As modern surveying equipment and methods have evolved, LSS has also developed
much more functionality in order to make the most of the techniques available. This is
especially true when it comes to data acquisition, field coding and transfer from survey
instruments. McCarthy Taylor Systems Ltd has strived to ensure that LSS surveyors are
able to make the most of the options available.
This workshop manual has been prepared for trainees attending the LSS and Survey
Instruments workshops to help with the configuration of both the survey instrument and
computer laptop. It is normal (and recommended) that the trainees bring their own
instruments and laptops to the workshop, so that they leave with a fully configured and
working system.
Hence we will start by ensuring that the latest version of LSS is installed on the trainees
laptops, upload a standard LSS code list onto the instrument and make any required
configuration changes to the survey instrument.
We will look at feature coding for strings and points, plus the LSS Reserved codes and
how these can be used to add extra observations effectively and efficiently into the LSS
survey.
There will be a practical exercise outside to help demonstrate these options, followed by
the downloading (transferring) of the practical exercise survey data onto the laptops and
the processing in LSS.
We will finally look at the export commands in LSS to see how we can upload design
data for setting out back onto the instrument. We will also look at how to update the
LSS legend in a typical LSS prototype survey before creating the necessary code lists to
upload back onto the survey instrument.
Session 1 09:30-11:00
Break
Session 2 11:15-13:00
Lunch
Session 3 13:30-15:00
Break
Session 4 15:15-16:30
Survey instrument support files are held in folders specific to each manufacturer on the
LSS installation DVD.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 3 of 58
1. Session 1 Duration: 1 hour 30 minutes
If the latest version of LSS is not set up on the laptop then the program can be installed
either from a DVD or following downloading from the LSS website at dtmsoftware.com.
From the DVD, the following Installation allows the user to install LSS and Tutorials,
Files for Surveyors for different survey instruments, Rough Guides, Utility Programs, 3D
Demos and the 3D Vantage program.
Follow the default install unless LSS is already installed on this PC.
Testdata contains example data/settings and includes the legend prototype for those
new to LSS (see Configure).
We can install Tutorials and Testdata separately.
The Deskey dongle drivers installation will automatically follow the LSS install but is not
needed if LSS is already running on the PC.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 4 of 58
1.2 Installing Other Files used by LSS
The Survey Instrument support files are also found on the LSS installation DVD, under
Files for Surveyors:
Leica System 1200 includes Viva and the new Nova instruments and for all these loggers
on this platform it is recommended that the survey data is transferred to pc using the
Leica 1200 (DBX) Database Reader, which is installed by hitting the icon below:
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 5 of 58
This will create a new folder Leica 1200 DBX immediately beneath the default folder
which will be the LSS root program folder, namely C:\MTPSYS.
The System 1200 DBX database reader can also be installed from the LSS Installation
DVD using Windows Explorer to find (and run) the Leica_1200_dbx.exe file in the Leica
\ 1200 \ Leica_1200_dbx directory.
All the required installs have been grouped together at the bottom of the above screen.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 6 of 58
Next the System 1200 Example Codelist is installed on the C:drive from the Codelist
directory on the DVD. Three codelists area available on the DVD: the standard LSS
Prototype, the road markings prototype and an advanced version, which uses some
higher functions on the Viva. These are pre-formatted for immediate upload to the
System 1200 instrument without the need to go via Leica Geo Office Tools and we will
transfer across to the instrument data card or USB stick.
Or the codelist files can be copied direct from the DVD onto the Leica System 1200
memory card.
The Leica System 1200 GPS Format File can be ignored here the GPS or TPS
format is copied over as part of the DBX database reader.
But we will need to install Leica Geo Office Tools Program by saving the zip file,
unzipping on the C: drive and running the Setup.exe file to install Leica Geo Office
Tools on the pc.
Alternatively we can open the DVD with Windows Explorer, find the
Leica_Geo_Office_Tools_en directory in Support files \ Leica, and run the Setup.exe file.
For Leica TPS instruments, Leica Geo-Office Tools is the communication software from
Leica and we will see later in the workshop how we use this software to add new feature
codes into a codelist and transfer the updated codelist to the Leica 1200 platform
instruments.
All these files are also available for downloading and installing from the LSS website at
dtmsoftware.com.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 7 of 58
Rough Guides
The following window is invoked when selecting the Rough Guides from the Home
screen:
For example clicking on 1 Feature coding for Land & Eng. Surveyors will open a
very useful document Principles of Survey and Feature Coding as a pdf file.
This describes in detail the aspects of coding and stringing on the logger for optimum
input into LSS and we will look at some of the details later on as part of the practical
exercise.
The other useful pdf document that can be downloaded and printed is the LSS -
instrument interface guide on setting up LSS and Leica System 1200 / Viva on which
this manual has been based.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 8 of 58
1.3 Installing Programmers Notepad File Editor
The LSS installation DVD contains a shareware program called Programmers Notepad
File Editor that we have found ideal for editing large files of data. It is found in Utility
Programs, or the program can also be downloaded from the LSS Website.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 9 of 58
This will install Programmers Notepad on your
computer. Follow the installation defaults
including the destination location;
C:\Program Files(x86)\Programmers Notepad.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 10 of 58
1.4 Configuring Leica System 1200
The two requirements for using LSS coding to the best advantage are a relevant code
list and a subset of the config set both of which have identical usage for both TPS and
GPS.
Note: the instrument firmware is important for the support of some of the functions in
this section. If you do not have the latest firmware, particularly if it is earlier than
Version 5.62, not all the options will be available.
Code List
An example code list has been built from the LSS prototype legend (supplied with
Testdata) on the LSS DVD (in Support_files\Leica\1200\code_list) and already
copied to the C: drive folder earlier.
The LSS point features translate as point codes and the LSS link features as point
codes with lines (replacing the use of line codes for processing purposes).
The following steps explain the method of transferring this code list to the System 1200;
1) Copy the required Code list files .XCF, .X06 and .X23, from the LSS DVD Code
lists folder to the Code folder on the card.
* Note : The 1200 Simulator card folders are in Configuration/Data Paths/PC card
path
2) Transfer the Compact Flash card from your computer to the System 1200 sensor.
* Note : The Compact Flash card must always be Stopped before removing it
from the PC and the System 1200 must always be switched off before removing
the Compact Flash.
This contains all the predetermined settings for a Leica 1200 instrument of which the
Display mask and the Coding/Linework elements are important to LSS;
Use the scroll bar to reach the fifth attribute e.g. the
tree species in the LSS example code list.
To amend your display mask to match that shown above choose Management /
Configuration Sets from the main menu. Highlight the configuration set to be updated
then select New to create a copy of this config set (select [F3] Edit to change the
existing one) typing in the new Name and Description etc. Click Store to create the
copy.
On the Wizard Mode screen select [F6] List / Display Settings and [F3] Edit.
We suggest the following settings;
Mask 1 Survey - leave as your preferred view of the measurements etc
Mask 2 Offset - remove this by setting Use in Survey to NO (not needed for
LSS).
Mask 3 Code change to see the code list attributes as below by clicking DMASK
Enter the Lines as shown below using the scroll bar to access the settings as shown in
the second screen capture.
Note: These changes are necessary in order for the LSS coding to perform correctly.
On the Wizard Mode screen again select Coding and Linework Settings /[F3] Edit.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 12 of 58
This is essential for the correct use of the Code list
etc.
ID Templates
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 13 of 58
1.5 Configuring Leica Viva System
The two requirements for using LSS coding to the best advantage are a relevant code
list and a subset of the config set both of which have identical usage for TPS and GPS.
Code List An example code list has been built from the LSS prototype legend
(supplied with Testdata) on the LSS DVD (in Support_files\Leica\1200\code_list)
and already copied to the C: drive folder earlier.
The LSS point features translate as point codes and the LSS link features as point
codes with lines (replacing the use of line codes for processing purposes).
The following steps explain the method of transferring this code list to the Viva logger;
1) Copy the required Code list files .XCF, .X06 and .X23, from the LSS CD Code lists
folder to the Code folder on the card or USB memory stick.
2) Transfer the Compact Flash card / USB memory stick from your computer to the
Viva logger.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 14 of 58
Work Settings
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 15 of 58
Coding & Linework
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 16 of 58
My Survey Screen Settings
The My Survey Screen Settings shows the Code and its description along with up to
five associated attributes (as used by the example prototype tree feature PD). Use the
scroll bar to reach the last attribute.
To set up Hot Keys and favourites, from the User menu select Work settings then 4
Hot Keys & favourites
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 17 of 58
1.6 Summary of Session
b) How to install the various files needed to download survey data from the
Leica System 1200 and related instruments.
d) How to Configure the Leica System 1200 and Leica Viva instruments.
If you have any questions on the above subjects then please ask the trainer now.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 18 of 58
2. Session 2 Duration: 1 hour 30 minutes
The following plan and accompanying coding document have been designed so that a
practical exercise can be carried in which to practice some of the latest techniques that
have been developed in conjunction with Leica System 1200 and Viva instruments.
These include general feature coding, the use of string numbers and the . and ..
special codes, feature attributes on the instrument and reserved codes used to generate
additional observations in LSS. It is quite a condensed survey so be prepared to take a
bit of time to acclimatize yourself with how the feature and other coding is applied on the
instrument.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 19 of 58
In the plan below the numbers refer to the point identifiers, marked on mini sports
cones, which are to be the point ids on the instrument.
The black numbered observations are the ones to be surveyed; whilst the blue numbered
observations are those representing extra points created by using the LSS reserved
codes, described fully in the rough guide.
The table on the page opposite, to be taken outside along with the plan, is an itinerary of
the codes to use on the instrument in order to make use of the coding options during
Input Load in LSS.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 20 of 58
Leica 1200 / Viva / Nova Workshop Coding Details
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 21 of 58
2.2 Instrument Data Capture on a Leica 1200
Select New
Returning to the Survey Begin page, the Coord System, Codelist and Config Set
should be set for the new survey e.g. as per the LSS CD Support files folder.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 22 of 58
Setup procedure
Press OK [F4].
Control Observations
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 23 of 58
Detail procedure
For basic measurements centre the TPS1200 accurately on the prism at your detail
point, set the Point Id (e.g. to 1) and press ALL [F1].
If the ATR is being used the Total Station needs only to be aimed approximately at the
prism.
If LOCK is being used the Total Station will follow the prism as it is moved from point
to point.
The DIST [F2] and REC [F3] keys can be used instead of the ALL [F1] to measure an
object that the prism cannot occupy the centre of (e.g. a pole).
The prism is placed next to the object and DIST pressed to measure the distance and
place it in a buffer.
The instrument is then turned so that the centre of the object is bisected and REC
pressed.
Detail Coding
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 24 of 58
Attributes
Where Attribute 1 is the string number it can be left blank and a new string is started
each time the code is toggled. This is true even when the code remains the same.
Free-codes
A Free-code applies to One shot only as it only applies to the current observation and
does not appear on subsequent measurements.
The LAST button will show the last used codes in order.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 25 of 58
Subsequent set-up procedure
Press OK [F4].
Important Note:
Never insert or remove the Compact Flash [CF] card unless the System 1200
sensor is switched off. If there is data access to the CF card when removing or
inserting it, your files may become damaged.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 26 of 58
2.3 Instrument Data Capture on a Leica Viva
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 27 of 58
Setup procedure
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 28 of 58
Detail Procedure
LSS uses Point, Point with Line and Free coding. The Codes are accessed via the display
entry Code and the Free Codes via the [F7] key. In each case the relevant Codelist is
displayed as exported from LSS (see the LSS CD support_files folder).
Note: It is necessary to use the ATTRIB button on the code list to change an attribute
that is not set to Mandatory as per reserved codes, -REC and RIN.
Note: The LAST button will show the last used codes in order.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 29 of 58
Smart coding
Method - Not Used (Zig-Zag and Same direction can be used if required)
Note: The following details follows after the Setup during the detailing procedure:
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 30 of 58
2.4 Summary of this Session
If you have any questions on the above subjects then please ask the trainer now.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 31 of 58
3. Session 3 Duration: 1 hour 30 minutes
To configure our logger of choice in LSS we select Configure Hardware & System,
followed by Logger - New (if this is already another logger configured then the option
will be Logger / Change). Now we need to choose the format of the data.
We will configure LSS for a Leica System 1200, for which the recommended method is
to use Leicas 1200 DBX Database Reader to access the list of jobs on the instruments
memory card and which should have been installed in Session 1.
Note: This must be repeated for all PCs likely to be processing Leica System 1200 data.
Once installed and configured, the DBX Database reader will read the card and the list of
jobs will appear in the next window. The Database reader will then put out an ascii file
with the same job name but a .SVY extension, and it is this data file, in Leica GSI
format, that LSS is able to read and convert.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 32 of 58
3.2 Configuring the New Survey Parameters in LSS
For each survey the following parameters are set during what is termed the survey
initialisation process, which is the starting point for all surveys.
The command Configure Hardware & System - New Survey Parameters allows
many of these options to be set in the following window:
Default Scale factor - this value does not affect any distance calculations directly but is
used to provide a default scale factor to newly loaded or edited stations to relate radial
survey observations to their grid coordinates.
The value is normally be set to 1.0, but, Note: GPS data (including stations) based on
the OSGB36 TN02 transformation should have the local scale factor applied here.
Curvature / refraction adjustment - will apply a fixed correction to radial survey data.
The difference in level between adjusted and non-adjusted observations amounts to
7mm in the first 1km, rising to 7m at 10km, so is rarely of concern for most surveys.
Conditioning tolerance - applies to arcs and circular steps - either surveyed or Co-Go
generated - or when Output smoothed links is used.
Angles format all survey data is displayed in this format and can be changed.
Obs format cannot be changed once radial survey data have been processed. It is
possible to have different formats contained in loadfile(s), but after being processed all
survey data is displayed / reported in this format.
VA Collimation - sets the default Vertical Angle at horizontal- either 90 or 270. LSS is
able to process combined Face Right and Face Left station observations.
Control tolerances refer to the survey data processing of control observations. When
a control (station) observation exceeds the warning or error values it is reported.
However, when an error is issued the survey processing will be terminated as well.
It is the responsibility of the surveyor to be aware of these settings.
Note: It is possible to use negative target heights for when the detail pole is inverted,
but exceeding the set values will also issue a warning.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 33 of 58
3.3 Configuring the File Editor in LSS
Programmers Notepad File Editor (PN) installed earlier from the LSS DVD is a program
that we have found ideal for editing large files of data that are in Ascii (text) format.
The program can also be downloaded from the LSS Website.
We are now ready to process our practical exercise survey in a new LSS survey.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 34 of 58
3.4 Creating a New Survey in LSS
A survey must be open to process data into LSS and we will do this exercise in a new
survey.
Click Save.
Or this window can also be invoked by the command Configure Survey Parameters.
Note: the LSS Prototype is found in Testdata and also in Prototype directory, and either
can be used here. Testdata is set here because this is where all the training datasets are
held.
It is assumed that the surveyor will look to create their own prototype for their features
in say C:\Surveys\Prototype and so will not be accessing the original LSS prototype in
Testdata.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 36 of 58
3.5 Processing the Workshop Survey in LSS
File/New
Existing survey New survey Create survey (.LSS)
File/Open Browse
for LSS file No data file LSS load file Non-LSS load
exists exists file exists
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 37 of 58
Data processing Input Download / Convert
The first task is to transfer the Leica 1200 memory card from the instrument to the card
slot on the pc or card reader, once it is safe to remove from the instrument.
Selecting Input Download / Convert will invoke the Download data window, the
variant shown on the right being displayed if we have not already configured a logger
which prompts us to do so by clicking New and following the dialog boxes:
Either way we will need to save the logger configuration settings in the system registry.
Note: The No data transfer/download tick box can be selected if the survey data has
already been copied across to the hard drive of the computer.
Clicking Next:
Select the System 1200 job data folder on the memory card inserted into the card
reader by either
b) Click Explorer and find a file within the folder and drag and drop into the Job
folder dialog.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 38 of 58
Clicking OK to the selected Job folder will provide a list of the System 1200 jobs in that
folder. You should find a list of surveys in the following window, so choose the required
job and click OK.
The name of the download file to be transferred will default to job file name.SVY
The data type to be downloaded defaults to the recommended instrument raw data in
EDM radial and/or GPS coordinates.
The option All data as coordinates (no QA) will process the job as instrument calculated
coordinates with no checks.
Archive DBX job database will copy the database files to a sub-folder of the current
survey.
Note: The job database files (DBX) are not expected to be archived if they are already
in a folder under the current LSS survey folder tree and the option will be greyed.
Note: It is recommended that at least None is selected; this will then include those
observations taken to remote heights of features (the VA Reserved code), which are
classed as None on the instrument.
Click OK and the data transfer will now occur and LSS will display the data conversion
dialog on completion.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 39 of 58
We should be prompted to the next Input Download / Convert Conversion of Leica
LSS default window.
Make sure the LSS load file input box is empty and Click 'Next'. LSS will automatically
provide the next available load file number for the current survey, i.e. WORKSHOP
SURVEY.001.
Leave the other settings as per default (the processing of data into LSS is covered in the
LSS for Surveyors and Engineers course including quality control, error analysis and
feature code conversions)
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 40 of 58
If any feature conversions have been responded to during the data conversion (other
than the choice No more feature conversion requests on the first dialog) then at the
end an option to save all the feature conversion responses as a file will be offered.
At completion we see the conversion report window which shows the number of
converted stations, set-ups, observations, text etc and whether used or unused.
This review is well worth checking to make sure all the observations have been
converted and loaded, and (especially) the number of Set-ups is correct.
On choosing OK we will be prompted to Save and Load the newly created load file.
Or Delete, if problems
have been encountered,
or we forgot to use a
conversion file.
Click OK
The 'Save and LOAD file' option will automatically invoke Input Load and highlight the
newly created load file.
Note: If the load file name is for a survey that does not exist then the Save and Load
option will prompt File New to create a new survey prior to Input Load.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 41 of 58
Data processing Input Load
Introduction
The LSS Load Input file is the format by which all external data is processed into LSS
e.g. data from a survey instrument has to first be converted to a load file via the Input
Download & Convert option.
The Input Load command will invoke the following window, highlighting the correct
load file i.e. .001 if Save and Load has been chosen.
A Load Report
file will be
generated we
select the file
type.
Leave the
options as per
default and click
'Next'.
Click OK.
Otherwise the station coordinates from the Leica instrument are loaded along with the
detail.
Clicking the Edit button next to the Load file 001 will open the load file in Programmers
Notepad, if this has been set as the File editor, The Load file can be viewed and edited
to address any issues raised during Input Load.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 42 of 58
An explanation of the LSS Load file format
A load file can contain either radial observations, coordinate observations or both, which
can be opened in Programmers Notepad;
We may also use the special or Reserved codes, described in detail in the next session.
The end of the Input Load Report should appear, with a note
*** Warning(s) issued *** recognising that some warnings had been issued.
Any misclosures that exceed the warning parameter are labelled Large differences,
and Load will pause. Likewise for any that exceed the error parameter except that
here Load will not complete.
If we scroll back up the following report file, we might find Warning : Feature does
not exist. and Warning : Large Difference. Warnings have been generated during
the Input Load process. Otherwise, click Continue to update DTM and OK to close
window.
If a loaded feature is not found in the Legend, then the Warning : Feature does not
exist. is created. We will also be prompted to save new feature selections to CNV file.
For each control observation, the combined 3D measured slope distance is compared
with any stored values and tested against the Control Tolerance warning and error
values set in Survey Parameters.
Those control observations with Warning : Large Difference. next to them, are
where the warning tolerance (0.01m) was exceeded (but not the error tolerance).
Note: if an observed station does not exist in the survey, then the first observation is
used to compute its coordinates they are not meaned here. Subsequent station shots
become check observations.
Note: if any errors are encountered the load will not be permitted. It will be necessary
to review these errors and maybe respecify the error tolerance to allow the load.
Often errors occur simply because the stations have been incorrectly labelled during the
set-ups, or there is one poor observation.
To correct these click Back and then Edit to open up the load file. If you have set PFE
as your editor program then use CTRL+G to go to the line directly.
If available, Click 'OK' to continue and 'Continue' to complete the load and display the
data. This includes updating the triangulation to create the DTM.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 44 of 58
On the screen, the loaded survey should look like the screenshot:
Note: Attachments in the form of images have come through from the survey data.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 45 of 58
3.6 Leica 1200 format file
In normal circumstances the format file is not required for the 1200 when using LSS
because the DBX Reader replaces the need for its presence on the instrument. However,
if it does become necessary to use a format file it is important that the right one is used.
The correct one can be found on the LSS DVD in
\support_files\leica\1200\format\lss1200.frt
In this case copy the format file to the CF Card and then Transfer it from the CF-card
to System RAM using the similar procedure to transferring the code list shown
earlier.
Then from the main menu choose 4 Convert then 1 Export Ascii and then select the
LSS format file.
This will create a file identical to the SVY file created by the DBX Reader and can be
copied to the PC.
Following the processing sequence shown earlier just tick the box No data
transfer/download which will skip the DBX reader and then Browse the exported file
as Downloaded file in the conversion dialog.
a.
Filetype Custom Ascii
b.
Right click on New Settings Add name
c.
Settings button
d.
Coord class Current
e.
Sort by time i.e. not Point ID
f.
Format template: use LSS1200.frt from the
\support_files\leica\1200\format folder on the LSS CD.
g. Deactivated points turn off
h. In LSS Input / Download and Convert select Data transfer/download not
required and on the following conversion dialog Browse the downloaded file
from LGO.
Note: This will not include the free codes.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 46 of 58
3.7 GPS Survey Instrument Issues
GPS data can be read directly from the 1200 DBX database as long as the GPS
coordinate system has been fixed either;
An O.S. Grid OSTN02(GB).CSC and OSGM02GB.gem. The LSS DBX reader also
supports the use of OSGM02NT.gem and OSGM02RI.gem files for Ireland.
Note: During the Input Download / Convert process LSS will report if a job is using
CSCS or GEM files on the job list.
Or as a local grid via a coordinate transformation or a fixed base station and the levels
relate to Orthoheights.
Scale factor
If the GPS coordinate system contains a scale factor then LSS can combine this GPS
data with radial (EDM) data in the same LSS model.
Do this by setting the TPS corrections / GeomPPM / Calc Scale to Automatically in the
configuration set.
This enables LSS to read the scale factor at each station coordinate and hence process
the radial data with the correct scale factor.
There is now a new Transform option that applies/removes the scale factor in an LSS
survey as long as all the raw observations have been first transformed to their
calculated XYZ coordinates first (File Transform - Observations to XYZ).
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 47 of 58
3.8 Summary of this Session
a) Configuring LSS for the Leica 1200 System and other functions.
c) How to convert a Leica 1200 survey into LSS Load file format.
If you have any questions on the above subjects then please ask the trainer now.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 48 of 58
4. Session 4 Duration: 1 hour 10 minutes
LSS exports data to most types of survey instruments using the same logger
configuration as Input / Download / Convert.
From the main menu the export commands are listed under Export;
The generated files are copied across the instrument card or USB data stick ready for
transferring to the Leica.
For the Leica System 1200, Viva and Nova, we can ignore the Onboard instrument DTM
option, since this will be included in the Export Leica DBX database.
Export LandXML is currently being developed in LSS Beta for the next main release, so
we will ignore it for this course.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 49 of 58
Exporting Data direct to the Leica 1200 Datalogger as a Leica DBX File
New to LSS V9.90 is the option to export direct in DBX Database format, which is the
most convenient option for the Leica System 1200 platform instruments;
Standard survey
Note:
DTM and
Road (alignment SPF) are also
available.
OK
LSS will export the entire survey into the necessary DBX files which are copied onto the
instrument card job folder via the card reader.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 50 of 58
Exporting Data as a Leica GSI File
'Next'.
Next.
Note: The observations can have the code added to the point number, which can be
related to the SPF chainage.
Note: The data selected by the Selection filter is grouped in the export set first as
complete strings and then as individual points related to their loaded order. To export
the observations in the order they were located use Individual observations from the
previous dialog.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 51 of 58
4.2 Exporting an LSS Code List to a Leica System 1200 / Viva
The LSS option Export Upload code list to survey instruments will produce a Leica
1200 code list. However, we suggest that for new users the LSS prototype legend
(supplied with Testdata on the LSS DVD) is used as a standard starting point for which
there is a pre-built Leica 1200 code list available in the Support Files\Leica\1200
series\Code list folder of the DVD. Please refer to the Transferring a code list in
Session 1 above that explains how to copy these files onto the device.
As a consequence it is suggested that the Export code list option is best used for sending
new additional features to the Leica 1200 code list as they are added to the LSS
Prototype Survey. Follow the process below to create a new code list in Leica Geo Office
and then cut and paste the new features to the existing code list before placing it back on
the instrument.
Within a survey containing the prototype legend use the option Export Code list to
survey instrument / Leica.
Provide the filename for the code list.
Use LSS to generate the IDX code list
Note: It is suggested that no path is provided i.e. no backslash, so that LSS will save the
file in the current survey path. When imported to LGO this will also then become the
path for the LGO database files.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 52 of 58
Select the required point features.
Tick the Use trailing digits as dimension attributes under Points if there are dimension
items e.g. PT1, PT2, ,PT20 etc. This will allow LSS to export these as a single feature
with a Mandatory integer attribute for a more efficient code list.
Note: It is important in this instance to have an extra feature without the numeric suffix
e.g. PT, within the legend so that LSS can convert the items cleanly during the survey
processing.
Tick theInclude attributes for string numbers (links only) under Links if required. This
will add a Normal integer attribute, with a default of 0, so that each link feature can have
a string number if required for multiple string coding management.
Leave the Extra LSS codes box ticked to create all the Reserved codes as Free codes.
Note: This option will also export the String codes and Code words code groups that
contain a mixture of free and point codes for extra functionality. OffsetLR, OffsetFB and
OffsetUD are identical to the relevant reserved code offsets and SetupFr, SetupPt and
CTLObsRO are for use when not using the instrument set-up and coordinate menus. The
primary String codes and Code words are;
CTLObsID for point coding a control observation for the instrument and LSS
simultaneously.
Notes for adding general text at an observation
Freecode for adding multiple codes to one shot only
Start a new string from the previous point
The reserved codes as a group
The Tree feature requires two Point features with digit suffixes for dimensions, the first
feature represents the spread and the second the trunk e.g. PD1 and PS1.
Note: The Tree feature has several attributes combined to make it a tree function
including adding height and species information as well as the spread and trunk.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 53 of 58
4.3 Leica Geo Office Importing an LSS Codelist from an IDEX file
Click OK.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 54 of 58
The new Codelist will be displayed in the Contents
pane with the same name as the IDEX file. If you
wish to rename your Codelist, right click on the
Codelists file name and select Modify
Then in the right hand pane right click on each link feature and select Properties.
Change the Linework from None to Start (This applies to v5 firmware format upwards).
The right hand end of the dialog will now show the additional properties e.g. Lins Style and
colour which can now also be set.
Important Note: The LSS prototype code list LSSv9_80 on the LSS DVD has been
generated from the LSS prototype legend and has had all the above work already applied
and is ready to put straight on the instrument.
If you require to amend this code list and/or export an IDX code list from LSS you will need
to have Leica Geo Office installed (LGO Tools v6 is available on the LSS DVD).
As an LSS user you only need direct use of LGO for the Code List Manager and only then
when you wish to amend the prototype codelist supplied with LSS. Other examples of code
lists have also been provided e.g. LSSv980Road and LSS1200Adv, to give examples of
what can be added to a code list.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 55 of 58
4.4 Advanced code list use - example code list LSS1200Adv
To shorten the number of items on the main code list but maintain the same number of
codes in the code list overall;
If a feature code
has the two extra
characters >>
added LSS will
ignore it on import.
In order for the stringing to be seen on the Map you will need to change the coding and
linework String Attribute setting in the config set to 2 (as in the example code list it is
better to change all the codes in this way so that they will all appear on the Map).
Where a code does not have a main code with >> it is necessary to introduce a blank
attribute so that the string number is still attribute 2.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 56 of 58
4.5 Summary of this Session
c) How to use Leica Geo Office Tools Code List Managerand to append codes to
an existing code list
If you have any questions on the above subjects then please ask the trainer now.
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 57 of 58
Conclusion
In this workshop we hope that you will be in a position to start making the most of the
survey instrument, feature coding in the field, transferring survey data and design data
from and to the survey instrument. We have looked at the LSS Reserved codes and
using LSS to coordinate and check the survey control stations.
We should have covered a good deal of the options, but there are always new possible
methods and developments so do keep in contact by visiting the LSS Help and other on-
line resources, such as the LSS Online Forum and calls to our support line. You should
very quickly become comfortable using LSS and feel able to apply what you have learnt
today to undertake a wide range of survey and engineering tasks in the future.
March 2014
lss_with_system_1200.docx
Copyright McCarthy Taylor Systems Ltd, 2014
Page 58 of 58