Professional Documents
Culture Documents
4
Pipe Data
5
Pipe Data
6
Pipe Data
All products manufactured by Charlotte Testing with or use of compressed air or gas in PVC / ABS
Pipe and Foundry Company are proudly / CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
made in the U.S.A. NEVER test with or transport/store
R
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
NEVER test PVC / ABS / CPVC pipe or
e
P
fittings with compressed air or gas, or air
over water boosters.
ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
V
Refer to warnings in PPFA User Bulletin C
4-80 and ASTM D 1785.
-
D
W
V
P
I
P
E
7
Pipe Data
8
Pipe Data
SDR-35 GASKETED - PS 46
PART NO. NOM. SIZE UPC # QTY. PER LAYING WT. PER AVG. OD MIN. WALL
611942- SKID LENGTH 100 FT. (LBS.) (IN.) (IN.)
9
Pipe Data
Pipe listed in this section meets or exceeds the requirements of ASTMD 2729.
All products manufactured by Charlotte Pipe and Foundry Company are proudly made
in the U.S.A.
10
PVC and ABS DWV Fittings
HUB DIMENSIONS
ABS
SIZE A B C D
112 1.910 1.895 .687 .156
2 2.385 2.370 .750 .156
3 3.515 3.495 1.500 .218
4 4.515 4.495 1.750 .250
6 6.647 6.614 3.000 .281
PVC
SIZE A B C D P
114 1.675 1.650 .687 .156 V
C
112 1.915 1.895 .687 .156 &
2 2.390 2.370 .750 .156 A
3 3.520 3.495 1.500 .218 B
S
4 4.520 4.495 1.750 .250 D
6 6.647 6.614 3.000 .281 W
V
8 8.655 8.610 4.000 .322 F
10 10.776 10.737 5.000 .365 I
T
12 12.778 12.736 6.000 .406 T
I
14 14.035 13.085 7.000 .437 N
16 16.045 15.980 8.000 .500 G
S
11
PVC and ABS DWV Fittings
3 x 6 612 2
4 x 6 6932 134
4 x 8 712 12332
6 x 8 81332 11332
4 x 10** 112564 41532
4 x 12**
4 x 14(F) 19 934
4 x 16 (F)
2058 1014
6 x 10 92732 178
6 x 12** 1338 438
6 x 14 (F)
6 x 16(F)
8 x 10 1034 1116
8 x 12 1234 2116
8 x 14 (F)
2212 1138
8 x 16 (F)
2414 1218 P
10 x 12 1234 11116 V
10 x 14(F) 1734 534 C
&
10 x 16(F) 25 12 A
12 x 14(F) 161116 3316 B
12 x 16(F) 2034 6716 S
D
14 x 16(F) 1978 4716 W
V
F
I
T
T
I
N
Fabricated
(F)
G
** Assembled from two molded components S
Note: Shading indicates available in PVC only.
13
PVC and ABS DWV Fittings
10 x 8 112
12 x 8 11316
Fabricated
(F)
of PVC 444X.
Note: Shading indicates available in PVC only.
18
PVC and ABS DWV Fittings
gasket only.
Fabricated
(F)
Fabricated
(F)
25
PVC and ABS DWV Fittings
2 112 238
3 134 314
4 2316 31516
6 2116 51564
8 2 6332
10 318 8532
12 33164 912
14(F) 938 15916
16(F) 10516 1812
3 1316 2516
4 1 234
6 112 5364
8(F) 618 101516
10(F) 51116 1134
12(F) 512 14116
14(F) 6916 1378
16(F) 8516 1634
Fabricated
(F)
P
V
C
PART NO. 330X* &
A
Closet Bend, Reducing B
with Test Cap S
HUB X SPIGOT D
SIZE A B W
V
3 x 4* 6 358 F
I
T
T
I
N
Fabricated
(F)
G
* Available in ABS only S
Note: Shading indicates available in PVC only.
31
PVC and ABS DWV Fittings
14 x 14 x 6 1114 12 6
(N)(F)
16 x 16 x 6(N)(F) 1214 14 7
16 x 16 x 8(N)(F) 1258 16 8
16 x 16 x 10(N)(F) 13 18 9
16 x 16 x 12(N)(F) 13716 1934 978
16 x 16 x 14 131516 23 1112
(N)(F)
Fabricated
(F)
P
PART NO. 431 V
C
Double Sanitary Tee &
Street, Reducing A
(Sanitary Cross) B
SPIGOT X HUB X HUB X HUB S
SIZE A B C D
3 x 3 x 112 x 112 2916 4316 314 W
V
F
I
T
T
I
N
G
S
Note: Shading indicates available in PVC only.
37
PVC and ABS DWV Fittings
P
V
C
&
A
B
S
D
W
V
F
I
T
T
Fabricated
(F) I
** Assembled from two molded components
N
G
*** Assembled from three molded components S
Note: Shading indicates available in PVC only.
39
PVC and ABS DWV Fittings
Cleanout Tee
HUB X HUB X FPT
SIZE A B C
112 11516 238 1316
2 214 3 112
3 21116 378 11516
4 338 518 2916
6 4 8 4
8 514 1012 5532
8 x 8 x 4(F) 734 914 458
8 x 8 x 6(F) 814 1114 558
10(F) 1234 1212 614
10 x 10 x 4(F) 81116 1134 578
10 x 10 x 6(F) 1058 1134 578
10 x 10 x 8 1038 1038 5316
12(F) 1338 1412 714
12 x 12 x 4(F) 91116 10 5
12 x 12 x 6(F) 9516 1218 6116
12 x 12 x 8 11532 1014 6132
12 x 12 x 10(F) 13516 1212 614
Fabricated
(F)
Fabricated
(F)
10 x 10 x 6 x 6(F) 141516 3
4 1458
10 x 10 x 8 x 8 18 3 16 15116
(F) 7
12 x 12 x 4 x 4(F) 111316 1 14
12 x 12 x 6 x 6(F) 151116 716 1718
12 x 12 x 8 x 8(F) 1878 3316 1612
12 x 12 x 10 x 10(F) 211116 378 18116
14 x 14 x 4 x 4(F)
14 x 14 x 6 x 6(F) 15 1 16316
14 x 14 x 8 x 8(F) 19 2716 171932
14 x 14 x 10 x 10(F) 2178 4 1834
14 x 14 x 12 x 12 25 16 5 19 8
(F) 3 7
16 x 16 x 4 x 4
(F)
Fabricated
(F)
P
V
C
&
PART NO. 700 A
B
S
Return Bend
HUB X HUB D
SIZE A B C
W
V
112 312 134 134 F
2 5732 238 238 I
T
3 634 3116 3116 T
4 812 31116 31116 I
N
G
S
Note: Shading indicates available in PVC only.
49
PVC and ABS DWV Fittings
P
PART NO. 910* V
C
Swivel Tray Plug Adapter &
with Washer A
H X FPT B
SIZE A B S
112* 11316 15
32 D
W
V
F
I
T
T
I
N
G
S
* Available in ABS only
55
Pipe Data
Pipe listed in this section meets or exceeds the requirements of ASTM D 2949.
56
PVC Thin Wall Schedule 30 Fittings
HUB DIMENSIONS
T
H
I
N
PVC Thin Wall SCH 30 Fittings
Hub Dimensional Tolerances W
A
SIZE A B C D L
L
3.265 3.245 1.500 0.140
3.25 O.D. P
.008 .008 MIN. MIN. V
C
IPS Hub Dimensional Tolerances D
W
SIZE A B C D V
11 1.915 1.894 0.750 0.156
2
+.010/-.005 .006 MIN. MIN.
2 2.390 2.369 0.875 0.156
+.010/-.005 .006 MIN. MIN.
3 3.520 3.498 1.500 0.218
+.010/-.005 .008 MIN. MIN.
4 4.520 4.491 1.500 0.250
+.010/-.005 .009 MIN. MIN.
57
PVC Thin Wall Schedule 30 Fittings
58
PVC Thin Wall Schedule 30 Fittings
3 x 2 2716 112 32
29
D
W
PART NO. PVC 1129 V
Hub Adapter
(Adapts 3 IPS Hub to 3 Thin Wall Pipe)
SPIGOT X HUB
SIZE A B
3 x 3 112 12532
59
PVC Thin Wall Schedule 30 Fittings
60
PVC Thin Wall Schedule 30 Fittings
D
W
V
PART NO. PVC 1418
Sanitary Tee with Right & Left Side Inlets
ALL HUB
SIZE A B C
3 x 3 x 3 x 112 x 112 21516 41332 21516
3 x 3 x 3 x 2 x 2 21516 41332 21516
61
PVC Thin Wall Schedule 30 Fittings
62
PVC Thin Wall Schedule 30 Fittings
D
W
PART NO. PVC 1812 V
Closet Flange, Adjustable with Metal Ring
SPIGOT
SIZE A B C D
4 x 3 634 114 1
4 112
63
Certification
65
LIMITED WARRANTY
Charlotte Pipe and Foundry Company (Charlotte Pipe) Products are warranted to be free from
manufacturing defects and to conform to currently applicable ASTM standards for a period of
five (5) years from date of delivery. Buyers remedy for breach of this warranty is limited to
replacement of, or credit for, the defective product. This warranty excludes any expense for removal
or reinstallation of any defective product and any other incidental, consequential, or punitive
damages. This limited warranty is the only warranty made by seller and is expressly in lieu
of all other warranties, express and implied, including any warranties of merchantability
and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe
or its representative, in addition to or beyond this Limited Warranty, shall constitute a warranty.
This Limited Warranty may only be modified in writing signed by an officer of Charlotte Pipe.
This Limited Warranty will not apply if:
1) The Products are used for purposes other than their intended purpose as defined by local
plumbing and building codes, and the applicable ASTM standard.
2) The Products are not installed in good and workmanlike manner consistent with normal
industry standards; installed in compliance with the latest instructions published by Charlotte
Pipe and good plumbing practices; and installed in conformance with all applicable plumbing,
fire and building code requirements.
3) This limited warranty does not apply when the products of Charlotte Pipe are used with the
products of other manufacturers that do not meet the applicable ASTM or CISPI standards
or that are not marked in a manner to indicate the entity that manufactured them.
4) The Products fail due to defects or deficiencies in design, engineering, or installation of the
piping system of which they are a part.
5) The Products have been the subject of modification; misuse; misapplication; improper
maintenance or repair; damage caused by the fault or negligence of anyone other than
Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe.
6) The Products fail due to the freezing of water in the Products.
7) The Products fail due to contact with chemical agents, fire stopping materials, thread sealant,
plasticized vinyl products, or other aggressive chemical agents that are not compatible.
8) Pipe outlets, sound attenuation systems or other devices are permanently attached to the
surface of Charlotte PVC, ABS or CPVC products with solvent cement or adhesive glue.
Charlotte Pipe products are manufactured to the applicable ASTM or CISPI standard. Charlotte
Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or
compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe
and Foundry.
Any Charlotte Pipe products alleged to be defective must be made available to Charlotte Pipe at
the following address for verification, inspection and determination of cause:
Charlotte Pipe and Foundry Company
Attention: Technical Services
2109 Randolph Road
Charlotte, North Carolina 28207
Purchaser must obtain a return materials
authorization and instructions for return
shipment to Charlotte Pipe of any product
Testing with or use of compressed air or gas in PVC / ABS claimed defective or shipped in error.
/ CPVC / Cast Iron pipe or fittings can result in explosive
failures and cause severe injury or death. Any Charlotte Pipe product proved to be
NEVER test with or transport/store defective in manufacture will be replaced
compressed air or gas in PVC / ABS /
CPVC / Cast Iron pipe or fittings. F.O.B. point of original delivery, or credit
NEVER test PVC / ABS / CPVC / Cast Iron will be issued, at the discretion of Charlotte
pipe or fittings with compressed air or
gas, or air over water boosters. Pipe.
ONLY use PVC / ABS / CPVC / Cast Iron
pipe or fittings for water or approved
4/15/10
chemicals.
Refer to warnings in PPFA User Bulletin
4-80 and ASTM D 1785.
Charlotte and Charlotte Pipe are registered trademarks of Charlotte Pipe and Foundry Company.
66
This catalog accurately reflects dimensional information to the best
of our knowledge. If the dimensions on your job are critical, please
verify dimensional information with our factory.
This dimensional catalog accurately reflects our product line at the
time the catalog was printed. However, we add and delete items on
an ongoing basis to better serve our customers. Please refer to our
current list price sheets for an accurate listing of items offered.
Charlotte Pipe products are manufactured to the applicable ASTM
standard. Charlotte Pipe and Foundry cannot accept responsibility
for the performance, dimensional accuracy, or compatibility of pipe,
fittings, gaskets, or couplings not manufactured or sold by Charlotte
Pipe and Foundry.
67
PO BOX 35430
CHARLOTTE
NORTH CAROLINA 28235
PHONE (704) 348-6450
(800) 572-4199
FAX (800) 553-1605
LITERATURE BY FAX (800) 745-9382
WWW.CHARLOTTEPIPE.COM