Professional Documents
Culture Documents
IRF
IRF
BFD MAD
LACP MAD
Recovery
Slave
IRF
BFD/LACP MAD
1.
2. IRF
3.
4.
1 / 16
IRF2 undo shutdown IRF IRF
6. BFD MAD
7. LACP MAD
2 / 16
8.
9. Recovery
: Master
10. Slave
11. IRF
3 / 16
12.
1.
Device A
2.
IRF
Device A Device B
XGE1/3/0/1 XGE2/3/0/1
,,
3.
IRF IRF
IRF IRF
4.
# Device A
4 / 16
IRF 1 12 IRF 2
Ten-GigabitEthernet3/0/1
<Sysname> system-view
[Sysname-irf-port 2] quit
[Sysname] quit
<Sysname> save
IRF 3069
<Sysname> system-view
The device will switch to IRF mode and reboot. You are recommended to save the
current running configuration and specify the configuration file for the next
Do you want to convert the content of the next startup configuration file
Please wait...
Slot 1:
IRF
# Device B
IRF 2 26 IRF 1
Ten-GigabitEthernet3/0/1
<Sysname> system-view
[Sysname-irf-port 1] quit
[Sysname] quit
<Sysname> save
IRF
<Sysname> system-view
The device will switch to IRF mode and reboot. You are recommended to save the
current running configuration and specify the configuration file for the next
5 / 16
Do you want to convert the content of the next startup configuration file
Please wait...
Slot 1:
B A IRF
(2) BFD MAD
[Sysname] vlan 3
[Sysname-vlan3] quit
# VLAN 3 MAD IP
[Sysname] interface vlan-interface 3
[Sysname-Vlan-interface3] quit
1.
PC
2.
6 / 16
Device A Device B
IRF
IRF Device A Device B IRF
3.
# Device A
<Sysname> system-view
This command will convert the device to IRF mode and the device will reboot. Are you
sure? [Y/N]: y
IRF-port1/2
Ten-GigabitEthernet1/3/0/25
<Sysname> system-view
7 / 16
[Sysname-Ten-GigabitEthernet1/3/0/25] shutdown
[Sysname-Ten-GigabitEthernet1/3/0/25] quit
[Sysname-Ten-GigabitEthernet1/3/0/25] save
# Device B
<Sysname> system-view
This command will convert the device to IRF mode and the device will reboot. Are you
sure? [Y/N]: y
<Sysname> system-view
Warning: Renumbering the switch number may result in configuration change or loss.
Continue? [Y/N]:y
[Sysname] quit
<Sysname> reboot
IRF-port2/1
Ten-GigabitEthernet2/3/0/25
<Sysname> system-view
[Sysname-Ten-GigabitEthernet2/3/0/25] shutdown
8 / 16
[Sysname-Ten-GigabitEthernet2/3/0/25] quit
[Sysname-Ten-GigabitEthernet2/3/0/25] save
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] quit
# VLAN 3 MAD IP
[Sysname-Vlan-interface3] quit
1.
PC
9 / 16
2.
IP network
GE4/0/1 GE4/0/2
GE1/4/0/2 GE2/4/0/2
XGE1/3/0/1 XGE2/3/0/1
IRF LACP
3.
IRF IRF
IRF IRF
4.
# Device A
IRF 1 12 IRF 2
Ten-GigabitEthernet3/0/1
<Sysname> system-view
[Sysname] irf-port 2
[Sysname-irf-port 2] quit
[Sysname] quit
<Sysname> save
IRF
<Sysname> system-view
10 / 16
The device will switch to IRF mode and reboot. You are recommended to save the
current running configuration and specify the configuration file for the next
Do you want to convert the content of the next startup configuration file
Please wait...
Slot 1:
IRF
# Device B
IRF 2 26 IRF 1
Ten-GigabitEthernet3/0/1
<Sysname> system-view
[Sysname] irf-port 1
[Sysname-irf-port 1] quit
[Sysname] quit
<Sysname> save
IRF
<Sysname> system-view
The device will switch to IRF mode and reboot. You are recommended to save the
current running configuration and specify the configuration file for the next
Do you want to convert the content of the next startup configuration file
Please wait...
Slot 1:
B A IRF
(2) LACP MAD
# LACP MAD
<Sysname> system-view
[Sysname-Bridge-Aggregation2] quit
11 / 16
# 1/4/0/2 2/4/0/2 Device A Device B LACP MAD
[Sysname-GigabitEthernet1/4/0/2] quit
(3) Device C
Device C LACP LACP Device
A Device B Active LACP
#
<Sysname> system-view
[Sysname-Bridge-Aggregation2] quit
[Sysname-GigabitEthernet4/0/1] quit
1.
Device A
2.
12 / 16
3.
Device A
Device B
IRF
IRF Device A Device B IRF
4.
# Device A
<Sysname> system-view
13 / 16
This command will convert the device to IRF mode and the device will reboot. Are you
sure? [Y/N]: y
IRF-port2
Ten-GigabitEthernet1/3/0/25
<Sysname> system-view
[Sysname-Ten-GigabitEthernet1/3/0/25] shutdown
[Sysname-Ten-GigabitEthernet1/3/0/25] quit
[Sysname-Ten-GigabitEthernet1/3/0/25] save
# Device B
<Sysname> system-view
This command will convert the device to IRF mode and the device will reboot. Are you
sure? [Y/N]: y
<Sysname> system-view
Warning: Renumbering the switch number may result in configuration change or loss.
Continue? [Y/N]:y
[Sysname] quit
14 / 16
<Sysname> reboot
IRF-port1
Ten-GigabitEthernet2/3/0/25
<Sysname> system-view
[Sysname-Ten-GigabitEthernet2/3/0/25] shutdown
[Sysname-Ten-GigabitEthernet2/3/0/25] quit
[Sysname-Ten-GigabitEthernet2/3/0/25] save
# LACP MAD
<Sysname> system-view
[Sysname-Bridge-Aggregation2] quit
15 / 16
[Sysname-GigabitEthernet1/3/0/2] quit
(4)
<Sysname> system-view
[Sysname-Bridge-Aggregation2] quit
[Sysname-GigabitEthernet3/0/1] quit
16 / 16