Professional Documents
Culture Documents
Standard Test Method for Metal Recovery of Waste Printed Circuit Board
Keyword: Extraction, Waste, Electronic, Acid
10.5.
10.6. References:
1. ASTM D 3987 Standard Test Method for Shake Extraction of Solid Waste with Water.
2. ASTM D 1193 Specifications for Reagent Water.
3. ASTM D 3370 Practiecs for Sampling Water.
4. ASTM D 4687 Standard Guide for General Planning of Waste Sampling.
5. ASTM D 4793 Standard Test Method for Sequential Batch Extraction of Waste with Water.
6. ASTM D 7740 Practice for Optimization, Calibration, and Validaion of Atomic Absorption
Spectrometry for Metal Analysis of Petroleum Products and Lubricants.
7. ASTM E 122 Practice for Choice of Sample Size to Estimate a Measure of Quality for a Lot or
Process.
8. Wang, Z. Leaching of Coper from Metal Powders Mechanically Separated from Waste Printed
Circuit Board in Chloride Media Using Hydrogen Peroxide as Oxidant. Procedia Environ. Sci.,
Vol. 31, pp. 917 - 924, 2016.
9. Zhang, Y. Current Status on Leaching Precious Metals from Waste Pprinted Circuit Board.
Procedia Environ. Sci., Vol. 16, pp. 560 568, 2012.
10.7.
10.8.
10.9.
10.10.
10.11.
10.12. UNIVERSITAS INDONESIA
10.13.
10.14.
10.15. STANDARD TEST METHOD FOR METAL RECOVERY OF
WASTE PRINTED CIRCUIT BOARD
10.16.
10.17.
10.18.
10.19.
10.20. Disusun untuk memenuhi ujian tengah semester mata kuliah Standarisasi
Material
10.21.
10.22.
10.23. ADITYA WISNU PRAKOSO
10.24. 1306402734
10.25.
10.26.
10.27.
10.28.
10.29. FAKULTAS TEKNIK
10.30. DEPARTEMEN TEKNIK METALURGI DAN MATERIAL
10.31. DEPOK
10.32. MARET 2017