You are on page 1of 1

Common questions:

1. What is the purpose of ECA/EE-II lab?


2. We are too much focusing about frequency in our lab experiments. Why this
is so?
3. Define amplifier?
4. Define transistor?
5. Why CE configuration only we are used in lab?
6. How to describe an amplifier in three/four sentences?
7. Identify the main reason behind the transistor configuration BC107 used in
amplifier operations?
8. What is the role of bias resistor (R1 || R2)?
9. What is the role of emitter capacitor (CE)?
10.What is the role of emitter resistor (RE)?
11.What is the role of coupling/collector capacitor (C c)?
12.What is the role of collector resistor (RC)?
13.What is the role of base resistor (Rb)?
14.What is the role of base capacitor (Cb)?
15.Define upper and lower 3-dB frequency?
16.Define Bandwidth?
17.Why supply voltage taken as 12V only?
18.Write a short note on breadboard functionality?
19.What are the things one should concern before going to do experiments on
CRO? I mean to say, which triggers should be minimized and which triggers
should be maximized? Justify your reasons?
20.What is the role of function generator?
21.What happens when ports are shorted in breadboard?
22.What cautions one should be taken before going to do experiments on
breadboard?
23.What happen when ground is not connected?

You might also like