Professional Documents
Culture Documents
Features:
Unique patented ball & taper grip design enables
wrench power cycle operation on standard hexagon
nuts in any orientation including inverted applications
Quick nut release bayonet collar action
Ultra high grade stainless steel construction
Non-percussive full wrench torque capability
Designed to suit ANSI B18.2.2 Heavy Hex. & ANSI
B18.2.4 STYLE 2 hexagon nuts
Can be supplied in universal SQ.DR. or Hydratight
RSL dedicated wrench formats
Novel pin securing detent feature enables quick fitting
and removal of the SQ.DR. type Gripping Socket from
the wrench
F (RSL Type
Only)
C
B G
Nominal
F G
Nut
Socket (RSL MAX MAX Torque Socket
Across A B C D E
Drive Type Type Stud Weight
Gripping Flats (A/F)
Only) Height
Socket Ref: Dimension
SQ.
DR. RSL
in mm in Spline in mm in mm in mm in mm in mm in mm in mm lbf.ft Nm lb kg
1-1/4" SQ.DR. 1.0 2.84 1.29
1.25 2.06 52.2 0.83 21.0 1.98 50.3 3.11 79.0 2.91 74.0 1.89 48.0 1475.2 2000
1-1/4" HT-RSL RSL4 4.7 119.5 3.77 1.71
1-7/16" SQ.DR. 1.0 3.11 1.41
1.44 36.0 2.30 58.4 0.98 25.0 2.11 53.6 3.24 82.4 2.91 74.0 1.97 50.0 1844.0 2500
1-7/16" HT-RSL RSL4 4.8 122.9 4.10 1.86
1-5/8" SQ.DR. 1.0 3.24 1.47
1.63 41.0 2.54 64.5 1.73 44.0 2.13 54.0 3.26 82.8 2.91 74.0 1.97 50.0 2212.8 3000
1-5/8" HT-RSL RSL4 4.9 123.3 4.14 1.88
1-13/16" SQ.DR. 1.0 3.53 1.60
1.81 46.0 2.77 70.4 2.01 51.0 2.13 54.2 3.27 83.0 2.91 74.0 1.97 50.0 2766.0 3750
1-13/16" HT-RSL RSL4 4.9 123.5 4.43 2.01
2" SQ.DR. 1.0 3.84 1.74
2.0 50.0 2.97 75.4 1.65 42.0 2.11 53.5 3.27 83.0 3.19 81.0 1.97 50.0 3080.2 4176
2" HT-RSL RSL4 4.9 123.5 4.72 2.14
2-3/16" SQ.DR. 1.0 4.23 1.92
2.19 55.0 3.19 81.0 2.13 54.2 2.26 57.5 3.43 87.0 3.19 81.0 2.17 55.0 3080.2 4176
2-3/16" HT-RSL RSL4 5.0 127.5 5.09 2.31
2-3/8" SQ.DR. 1.0 4.54 2.06
2.38 60.0 3.43 87.0 1.93 49.0 2.26 57.5 3.43 87.0 3.19 81.0 2.17 55.0 3080.2 4176
2-3/8" HT-RSL RSL4 5.0 127.5 5.40 2.45
2-9/16" SQ.DR. 1.5 11154.7 15123 9.52 4.32
2.56 65.0 3.78 95.9 1.97 50.0 2.98 75.6 4.52 114.9 4.29 109.0 2.76 70.0
2-9/16" HT-RSL RSL6 6.7 169.2 5303.3 7190 10.96 4.97
2-3/4" SQ.DR. 1.5 11154.7 15123 9.15 4.15
2.75 70.0 3.86 98.0 2.36 60.0 2.98 75.6 4.52 114.9 4.29 109.0 2.76 70.0
2-3/4" HT-RSL RSL6 6.7 169.2 5303.3 7190 10.45 4.74
2-15/16" SQ.DR. 1.5 11154.7 15123 9.77 4.43
2.94 75.0 4.07 103.5 2.85 72.5 3.13 79.6 4.68 118.9 4.29 109.0 2.76 70.0
2-15/16" HT-RSL RSL6 6.8 173.2 5303.3 7190 11.16 5.06
3-1/8" SQ.DR. 1.5 11154.7 15123 10.25 4.65
3.13 4.29 109.0 2.95 75.0 3.13 79.6 4.68 118.9 4.29 109.0 2.76 70.0
3-1/8" HT-RSL RSL6 6.8 173.2 5303.3 7190 11.57 5.25
Note: The grip capacity of all Gripping Socket models is designed to retain approximately 10 times the weight of the largest Hydratight RSL wrench for that
particular sized Gripping Socket, subject to nut conditions. The Gripping Socket will skid at this point causing no damage to the nut producing minimal contact
marks. Gripping Sockets are not suitable for use on PTFE coated nuts.