Professional Documents
Culture Documents
RELIEF VALVES
H-900HP SERIES
2
3
MATERIALS OF CONSTRUCTION
Item No. Components Qty. Valve Body Material
1 Cap Plug 1 PTFE
4
2 Label 1 Polyester
3 Adjustment Cap 1 St.St 316
4 Spring 1 St.St. 302,17-7PH
5 Lower Spring Button 1 St.St 316 5
6 Locking Nut 1 St.St 316
7 Bonnet 1 St.St 316
6
8 O-Ring 1 Fluorocarbon FKM
9 Quad Ring 1 Fluorocarbon FKM
10 Retaining Ring 1 PH15-7Mo
11 Poppet 1 St.St 316
12 Clamps Screw 1 St.St 316
13 O-Ring 1 Fluorocarbon FKM
7
14 Insert 1 St.St 316
15 Body 1 St.St 316
12
13
14
Lock Wire
Holes
15
D
B
C
A B
si
800 700 p 55 800 700 psi 55
Inlet Pressure (Psig)
150 psi
200 14 200 150 psi 14
50 psi 50 psi
0 0
0 10 20 30 40 50 60 70 80 90 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2
Air Flow (SCFM) Water Flow (US.GPM)
VALVES & ACTUATORS
C D
si
psi 2000 p
2000
Inlet Pressure (Psig)
si
1200 83 1200 1000 p 83
1000 psi
i 800 psi
800 ps
800 55 800 55
0 10 20 30 40 50 60 70 80 90 100 0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Air Flow (SCFM) Water Flow (US.GPM)
E F
psi psi
3800 3800
4000 275 4000 275
Inlet Pressure (Psig)
550 0 psi i
5600 386 0 ps
5800 550 400
Inlet Pressure (Psig)
psi 0 ps
i
4400 4200 303 420
4600 317
Warning
n Valves that were not actuated for some time may contain
pressure higher than the set pressure.
n System designer and users shall determine what system
applications require using relief valves for meeting
specific safety codes and which valves conform to such codes.
OPTIONAL
H-9 00 - HP - SS - L - 1/4 - A - - -
1/4 for all end connections A, B, C, D, E, F, G, H 1/4 for all end connections VI - Fluorocarbon FKM
See table above BU - Buna N
EP - EPDM
n For oxygen applications work shall be carried out according to procedures for
NE - Polychloroprene (CR)
working with oxygen. In case spare kits are ordered for oxygen clean valves, such
kits have to be ordered as oxygen clean by adding "-OC" designator.
Example: Z-900-HP-SK-1/4-VI-OC
Warning!
The system designer and user have the sole responsibility for selecting products suitable for their special
application requirements, ensuring their safe and trouble-free installation, operation, and maintenance. Ap-
plication details, material compatibility and product ratings should all be considered for each selected product.
Improper selection, installation or use of products can cause property damage or personal injury.