Professional Documents
Culture Documents
I. Key specification
A catamaran designed to sail and live aboard both in high latitudes and tropical
waters.
Coachroof
GRP made coachroof vacuum infusion composite (Fiberglass, PVC high density foam,
Polyester resin)
Interface between hulls and roof structure by gluing and bolting
Insulation
Thermic and acoustic insulation above the waterline by automotive grade polyethylene
foam
Additional insulation for engine compartments with foam
Cathodic protection
Cathodic protection by sacrificial anodes under the hull and on the rudders
Options
Running rigging
Sails
1 x 107m Dacron cross-cut fully-battened mainsail with ball bearing mast slider system
and 3 reefs, triradial shape
1 x 60m Dacron cross-cut furling Solent with anti-UV strip
Lazy-bag and Lazy-jacks
Options
Self-tacking staysail
Fittings for Code Zero, gennaker or Asymetrical spinnaker
Gennaker/ Code Zero with furling system and banana bag
Asymmetric spinnaker with sock
Upgrade to Hydranet fully battened square mainsail, Jib and staysail
Additional spinnaker halyard with jammer at the mast
Reinforced boom toping lift with jammer
Sailing hardware
Control lines brought back to the helmsman
1 self-tailing solent winch size 55
1 self-tailing mainsail winch size 55
1 self-tailing reefing lines/halyard winch size 50 electrical
1 self-tailing mainsail traveller winch size 45
3 winch-handles One-Touch
Travellers, clutches, pulleys
2 forward trampolines Ribola
Water and fuel inlet on port and starboard sides
Options
Options
Options
Safety and emergency pack (as per description)
Options
Cockpit cushions upholstery
Seawater electrical pump in cockpit
Second integrated bathing ladder
Cockpit tent based on the hard bimini
Quay passerelle
Steering position :
Options
Rigid dodger at the helm
Textil dodger at the helm
Forward cockpit :
Sail-lockers :
V. Interior fittings
General characteristics
Interior finish : furniture in solid or laminated wood (choice of colors)and synthesis stone for
bathroom and galley work-top
Bathroom junctions from white laminated
Laminated anti-slip floor insulated with sandwich 40mm foam (choice of colors)
4 to 8 mm marine ply head linings covered with fabric or leather like
2,05 m headroom
Large access to saloon, gangways, heads and forward cockpit
Handrails in gangways
LEDs lights
Marine quality hardware
Interior upholstery from Dickson or Trojan range
Indirect lighting and lighting under steps
Curtains on all portholes
Mattress in 100 mm thick highly resilient 40 kg/m3 foam with removable Cool plus cover
Mosquito screens and blinds on deck hatches in saloon and cabins
Options
Saloon
Spacious, airy and luminous saloon, on the same level than cockpit
2,05 m headroom
Panoramic side and front windows with UV protection
Sliding door through aft cockpit
Seating area for 6-8 persons + 3 seats
High density foam seats covered with fabric
Large wooden table for 8-10 persons
Storage lockers under seats
Toilets-bathroom/technical area on the starboard side
Chart Table
Chart table with panoramic view
Seat
Navigation station
Electric panel
Indicators and navigation lights panel
Reading light with white/red switch
Storage unit alongside
Storage area under chart table
Large cupboard behind the navigator seat with shelves and synthesis stone work-top
Galley
Panoramic view and direct access on the exterior through a sliding door
L shape galley on portside
Double stainless steel sink with pressurized hot and cold mixer top
Worktop in mineralized synthetic resin
1 x stainless steel 144 liters vertical two-drawer refrigerator unit
1 x stainless steel vertical one-drawer freezer unit
3 burner hob and stainless steel oven with manual valve gas
3 ways valve for fresh or seawater selection on the foot pump
Storage units and drawers
2 x garbage can under the sink
LED overhead spotlights
Options
Starboard hull
Aft cabin
Bathroom
Access from the companion way with two large wardrobe and cupboard
Separated with marine toilet on portside
Bathroom with separated shower tray in gelcoat and Plexiglas walls
Washbasin in synthetic resin with mixer tap hot/cold water
Storage with stainless steel rail on higher part
Under the washbasin - 4 doors cupboard
Mirror
Towel rail
1 x opening hatch
Portside hull
Aft cabin
Forward cabin
Access from the companion way with dedicated volume for washing-machine
160 x 200 cm double bed with frontal access
High density foam mattress on slatted base
2 drawers under bed
Large wardrobe and cupboard at the entrance
Desk with seat on the bed side
LED lights
2 reading lights
1 large PMMA window including an opening porthole
Curtains on all portholes
2,05 m headroom
Bathroom
Options
VI. Systems
Motorisation
2 x Volvo Penta D2-75
Fixed three blades propeller
Cooling via sea water intake with quarter turn seacock and filter
Options
Electricity
220V circuit with sockets in cabins, saloon, galley, chart table and technical locker
1 x 12 V bipolar general electrical panel tableau at chart table
Gauges (fuel, freshwater, waste waters)
2 x 12 V 88 AH engine start-up batteries
2 x 115 AH / 12 V alternators for batteries
24 V 440 AH AGM service batteries
Battery charger
Leak tester
Shore power cable
Options
Options
Energy
8 K Generator Pack including:
- 1x 220V Fischer Panda 8000i
- 2x additional 108A service batteries
- 1x Victron Quattro 24V/5000W charger/converter
- isolation transformer 3600W 110/220V
Anchoring pack
35 kg Spade anchor with 100m of 12mm chain
Mooring pack
Diving pack
220V Junior 2 Bauer compressor with accessories (requires generator), with 2 diving
bottles storage racks
Engine 2 x 75 Hp
Architect/Designers
Naval Architect: Pierre Delion
Construction
Built in France by Garcia Yachting SAS
Certification
Category A CE certification
Layouts
3 cabin version
4 cabin version
Charter version
Profil