Professional Documents
Culture Documents
of Thermoplastics
PLASTICS DESIGN LIBRARY (PDL)
PDL HANDBOOK SERIES
Series Editor: Sina Ebnesajjad, Ph.D
President, FluoroConsultants Group, LLC
Chadds Ford, PA, USA
www.FluoroConsultants.com
The PDL Handbook Series is aimed at a wide range` of engineers and other professionals working in the plastics industry, and related
sectors using plastics and adhesives.
PDL is a series of data books, reference works and practical guides covering plastics engineering, applications, processing, and
manufacturing, and applied aspects of polymer science, elastomers and adhesives.
Recent titles in the series
Sastri, Plastics in Medical Devices
ISBN: 9780815520276
McKeen, Fatigue and Tribological Properties of Plastics and Elastomers, Second Edition
ISBN: 9780080964508
Wagner, Multilayer Flexible Packaging
ISBN: 9780815520214
Chandrasekaran, Rubber Seals for Fluid and Hydraulic Systems
ISBN: 9780815520757
Tolinski, Additives for Polyolefins
ISBN: 9780815520511
McKeen, The Effect of Creep and Other Time Related Factors on Plastics and Elastomers, Second Edition
ISBN: 9780815515852
Ebnesajjad, Handbook of Adhesives and Surface Preparation
ISBN: 9781437744613
Grot, Fluorinated Ionomers, Second Edition
ISBN: 9781437744576
McKeen, Permeability Properties of Plastics and Elastomers, Third Edition
ISBN: 9781437734690
Kutz, Applied Plastics Engineering Handbook
ISBN: 9781437735147
Kurtz, PEEK Biomaterials Handbook
ISBN: 9781437744637
Ebnesajjad, Fluoropolymer Additives
ISBN: 9781437734614
Brandan, Stretch Blow Molding, Second Edition
ISBN: 9781437735277
To submit a new book proposal for the series, please contact
Sina Ebnesajjad, Series Editor
sina@FluoroConsultants.com
or
Matthew Deans, Senior Publisher
m.deans@elsevier.com
Chemical Resistance
of Thermoplastics
Edited by
William Andrew Woishnis and Sina Ebnesajjad
William Andrew is an imprint of Elsevier
225 Wyman Street, Waltham, 02451, USA
The Boulevard, Langford Lane, Kidlington, Oxford, OX5 1GB, UK
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or any information storage and retrieval system, without
permission in writing from the publisher. Details on how to seek permission, further information about the
Publishers permissions policies and arrangements with organizations such as the Copyright Clearance
Center and the Copyright Licensing Agency, can be found at our website: www.elsevier.com/permissions.
This book and the individual contributions contained in it are protected under copyright by the Publisher
(other than as may be noted herein).
Notice
Knowledge and best practice in this field are constantly changing. As new research and experience
broaden our understanding, changes in research methods, professional practices, or medical treatment may
become necessary.
Practitioners and researchers must always rely on their own experience and knowledge in evaluating and
using any information, methods, compounds, or experiments described herein. In using such information or
methods they should be mindful of their own safety and the safety of others, including parties for whom
they have a professional responsibility.
To the fullest extent of the law, neither the Publisher nor the authors, contributors, or editors, assume any
liability for any injury and/or damage to persons or property as a matter of products liability, negligence or
otherwise, or from any use operation of any methods, products, instructions, or ideas contained in the
material herein.
ISBN: 978-1-4557-7896-6
12 11 10 9 8 7 6 5 4 3 2 1
Dedication
I dedicate Chemical Resistance of Thermoplastics to the memory of my husband, William Andrew Woishnis. He launched
the first version of Chemical Resistance in 1989, creating the Plastics Design Library and initiating one of the first elec-
tronic publishing platforms for scientific technical information. Considering himself an accidental publisher, he founded
William Andrew Publishing and co-founded Knovel Corporation, which put forth hundreds of titles by and for scientists
and engineers around the globe. He had an unabated commitment to his colleagues, authors, editors and the quality of his
work. My perfect partner in business and life, dedication to family topped his list. He clearly relished our son Aidan
and the life, love and laughter they shared. Williams time on earth proved too short, but his contribution great. Sometimes
passionate, sometimes a peacemaker, often affirming, intensely contemplative, William was the kind of person whom, just
by being around him, you found yourself a better person. Deeply, deeply personal and thoughtful, Williams dazzling grace,
brilliance and wit remain an important part of all who knew him.
Jeri Wachter
Material Index
Basic plastics technologies have matured over recent decades, for the most part resulting in a decrease in the number of
experts in the field. Yet applications of plastics and elastomers have proliferated in every area of technology including micro-
electronics, energy, transportation, medicine, drug delivery, and military and civilian apparel. Increasingly, professionals in
various fields with varying levels of expertise in plastics technology have to evaluate and select materials where a plastic
component may be a minor or major part of a larger system.
This Chemical Resistance reference has been available in several editions since its first publication by William Andrew
Inc. in the 1990s. The data in the current volume comes from the CD-ROM edition published in 2008, and not previously
available in print.
Chemical resistance data for high consumption volume commercial thermoplastic families (Commodity Thermoplastics)
are presented in the two volumes of Chemical Resistance of Thermoplastics. A supplementary volume covering Specialty
Thermoplastics is in preparation.
The data chapters of this work comprise data about exposure test conditions and test results, capturing the impact of a
wide range of exposure media on commodity thermoplastics. In addition, a rating number is provided for each test, summaris-
ing the impact according to a system devised by William Andrew Publishing called the PDL Rating.
Chemical Resistance of Thermoplastics also includes introductory chapters which will enhance the usefulness of the informa-
tion to a broader audience. The first of these chapters introduces polymer chemistry, physics and engineering at a fairly elemen-
tary level that is easy to read and accessible to technically informed readers without a background in plastics. The chapter begins
by providing definitions and a history of polymers. It continues with the classification of different types of polymers, including
thermoplastics, thermosets and elastomers. Also covered are properties, structures, and examples of commercial polymers as well
as processing and polymerization techniques. The chapter ends with a discussion of applications and common trademarks of
plastics.
The second introductory chapter discusses the effect of different classes of chemicals on polymers. Definitions of different
types of interactions and methods to measure them are given, and the reasons for different interactions of chemicals with plas-
tics and elastomers are discussed. The general hierarchy of the chemical resistance of different classes of polymers and com-
mercial plastics is reviewed, along with the common methods used to enhance chemical resistance properties. Finally,
examples of some applications that require chemical resistance are given, along with materials that would be suitable for these
applications.
The data presented in Chemical Resistance of Thermoplastics are also provided online for owners of the book.
The online version offers enhanced navigation and search features and includes some additional data about the materials
covered in the book as well as a few additional materials. To access the data online please register using the following link:
http://chemres-pdl.com
Sina Ebnesajjad
December 2011
In Preparation
Chemical Resistance of Specialty Thermoplastics
This additional volume will comprise the following chapters covering Specialty Thermoplastics:
Material Index
All materials are listed alphabetically in this index. The user can easily find a specific material and the location of the table
within the book.
AASC ............... Methyl Methacrylate Butyl Acrylate CTMP .................... Chemi-Thermo Mechanical Pulp ft .......................................................................foot
Copolymer cu-cm ............................................cubic centimeter FVMQ............................... Methylvinylfluorosilicone
ABS ........................ Acrylonitrile Butadiene Styrene cu-foot .................................................... cubic foot g...................................................................... gram
acc. ........................................................ acceptable cyan. ........................................................... cyanide gal. .................................................................gallon
acet............................................................ Acetone DAIP...................................... Diallyl Metaphthalate Gary .................................... AlphaGary Corporation
AEC .................................. Aromatic Estercarbonate DAP................................................Diallyl Phthalate Goodyear .......Goodyear Tire and Rubber Company
alc. .............................................................. Alcohol DDT.......................Dichlorodiphenyltrichloroethane h ......................................................................hour
alc.-contg. ...................................alcohol-containing deg.............................................................. degrees HAF ......................................High Abrasion Furnace
aliph........................................................... aliphatic deriv............................................................ derived halog. hydrocarb............ Halogenated Hydrocarbon
alk................................................................... alkali dg................................................................degrees HALS .................... Hindered Amine Light Stabilizers
AlkylDimeth. Benzylam. Chlor. Alkyldimethylbenzyl dim. ........................................................ dimension HDPE.............................. High Density Polyethylene
Ammonium Chloride
DIN........................ Deutsches Institut fr Normung HDT........................... Heat Deflection Temperature
am......................................................... Ammonium
DMA ............................................... Dimethylamine HEF................................................High Energy Fuel
AMA........................... Acrylonitrile Methyl Acrylate
DMF .................................. N,N-Dimethylformamide HEMPA..................Hexamethylphosphoric Triamide
amend.................................................. amendment
DMSO ........................................Dimethyl Sulfoxide hexachlorocyclopent......... Hexachlorocyclopentane
Ammon. Carbonate .............Ammonium Carbonate
DNP............................................. Dinonyl Phthalate HMWLDPE ......High Molecular Weight Low Density
ANSI............ American National Standards Institute Polyethylene
DOP.............................................. Dioctyl Phthalate
aq............................................................... aqueous hr .....................................................................hour
Dow .................................. Dow Chemical Company
Aramid .....................................Aromatic Polyamide hrs.................................................................. hours
DSM .................................DSM Engineering Plastics
Aristech.................................. Aristech Acrylics, LLC HTF ..................................... High Temperature Fuel
DTBP ......................................di-tert-Butyl Peroxide
arom. ........................................................ aromatic Huls............................... Chemische Werke Hls AG
ea.....................................................................each
ASA ........................... Acrylate Styrene Acrylonitrile hyd. chloride sat........ Hydrogen Chloride saturated
Eastman ......................Eastman Chemical Company
ASTM ...........American Society of Testing Materials hyd.............................................................. hydride
ECTFE ................... Ethylene Chlorotrifluoroethylene
atm. ..................................................... atmosphere ICI Adv. Mat........................ ICI Advanced Materials
EDTA .....................Ethylenediaminetetraacetic Acid
auto. trans. fluids .......Automotive Transport Fluids ICI................................Imperial Chemical Industries
EMA .................................Ethylene Methyl Acrylate
BBP ...................................... Butyl Benzyl Phthalate in.......................................................................inch
EMS...............EMS-GRIVORY Performance Polymers
BR .......................................................Butyl Rubber Inc....................................................... Incorporated
Emser................................................. Emser Werke
CAB ................................Cellulose Acetate Butyrate ind............................................................ individual
EPDM ............. Ethylene Propylene Diene Monomer
cad. .......................................................... Cadmium Ind. .......................................................... Industrial
EPM ......................... Ethylene Propylene Monomer
CDM.................................... Color Difference Meter Indspec ...................INDSPEC Chemical Corporation
ESCR........Environmental Stress Cracking Resistance
chlor........................................................... Chloride inhib........................................................... inhibitor
ETFE ...........................Ethylene Tetrafluoroethylene
CIE lab......... Commission Internationale dEclairage IPS............................................. Impact Polystyrene
ethyl.ox............................................Ethylene Oxide
cm.......................................................... centimeter IRHD.......... International Rubber Hardness Degrees
EtO...................................................Ethylene Oxide
Co. ........................................................... Company irrad. ........................................................irradiance
EVA ...................................... Ethylene Vinyl Acetate
Colorite .............................. Colorite Europe Limited ISO .................International Standards Organization
Eval ............................... EVAL Company of America
com....................................................... commercial ISO/NPG.....................Isophthalic/Neopenthylglycol
EVOH ................................... Ethylene Vinyl Alcohol
compat................................................ compatibility l......................................................................... litre
expos. ....................................................... exposure
compds. ................................................ compounds Labs. ....................................................Laboratories
F.R................................................. Flame Retardant
compn.................................................. composition lb................................................................... pound
Fed. Spec. ............................. Federal Specifications
conc. ................................................. concentration LCP....................................... Liquid Crystal Polymer
fed. .............................................................. federal
concd. ................................................ concentrated LDPE................................ Low Density Polyethylene
FEF .......................................Fast Extrusion Furnace
concs................................................ concentrations liq................................................................... liquid
FEP......................... Fluorinated Ethylene Propylene
cond......................................................... condition liqs. ............................................................... liquids
fermentn. mix........................fermentation mixture
cont..............................................................contain LLDPE ................... Linear Low Density Polyethylene
FFKM..... Tetrafluoroethylene Perfluoromethyl Vinyl
contg....................................................... containing Ether Copolymer long.......................................................longitudinal
Continental .............................. Continental Acrylics Fiberite .................................................. ICI Fiberite LPG ....................................Liquified Petroleum Gas
COPA....... Polyetheramide Thermoplastic Elastomer FKM ........ Vinylidene Fluoride Hexafluoropropylene Ltd................................................................Limited
Corp. .................................................... Corporation FMQ........................................ Methylfluorosilicone m ...................................................................meter
CPVC ........................ Chlorinated Polyvinyl Chloride foliat. talc .............................................foliated talc mag. chloride..........................Magnesium Chloride
CSM ............ Chlorosulfonated Polyethylene Rubber FPE................................... Fluorinated Polyethylene manuf. ............................................. manufacturing
CTFE ....................................Chlorotrifluoroethylene fpm ................................................ foot per minute manufd. ............................................ manufactured
xviii Abbreviations
materi. ....................................................... material PEK.................................................Polyetherketone SAE....................... Society of Automotive Engineers
max..........................................................maximum PEKK ................................... Polyetherketoneketone SAE Tech. Paper.........................SAE Techical Paper
MBS ......... Methyl Methacrylate Butadiene Styrene Pelseal .............................Pelseal Technologies, LLC SAF.....................................Super Abrasion Furnace
MBT ....................................Mercaptobenzothiazole PES................................................ Polyethersulfone SAN ......................................... Styrene Acrylonitrile
MBTS ............................ Dibenzothiazole Disulphide PET............................... Polyethylene Terephthalate sat.............................................................. saturate
MDI..............Methylene Di-p-Phenylene Isocyanate PETG ........................Polycyclohexylenedimethylene satd.......................................................... saturated
MDPE ....................... Medium Density Polyethylene EthyleneTerephthalate SBC........................... Styrene-Butadiene Copolymer
med. .......................................................... medium PFA ................................................. Perfluoroalkoxy SBR ................................ Styrene Butadiene Rubber
MEK ........................................ Methyl Ethyl Ketone Phillips ............ Chevron Phillips Chemical Company SEBS ................. Styrene-Ethylene/Butylene-Styrene
MFA ..............Tetrafluoroethylene Perfluoromethyl photog. .............................................. photographic sec ..............................................................seconds
Vinyl Ether phr .............................................. per hundred resin SEP...............................Styrene Ethylene/Propylene
mg.............................................................milligram phthalic ahhyd...........................Phthalic Ahhydride sep. ............................................................separate
MIBK .................................. Methyl Isobutyl Ketone plast.........................................................plasticizer SEPS ................Styrene-Ethylene/Propylene-Styrene
min .............................................................minutes PMI .......................................... Polymethacrylimide silv. cy. .............................................. Silver Cyanide
misc. ................................................. miscellaneous PMMA.............................. Polymethyl Methacrylate SMA ................................Styrene Maleic Anhydride
Mitsui ................................Mitsui Chemicals Group PMP .......................................... Polymethylpentene sod. cy............................................ Sodium Cyanide
mix.............................................................. mixture PMPPIC ........ Polymethylene Polyphenyl Isocyanate sod. fluosilic.............................. Sodium Fluosilicate
mL.............................................................. millilitre PMQ....................................... Methylphenylsilicone sod. sulfate ..................................... Sodium Sulfate
mm ......................................................... millimeter Polycast ..........................................PolyCast Acrylic sod. ..............................................................sodium
MMA...................................... Methyl Methacrylate POM............................................Polyoxymethylene sol. ..............................................................solution
moist......................................................... moisture pot. carb. ............................... Potassium Carbonate soln. ............................................................solution
mol. wgt. ..................................... molecular weight pot. cy........................................Potassium Cyanide solns. ........................................................ solutions
MPDA ...............................Metaphenylene Diamine pot. ferrocyan.................... Potassium Ferrocyanide Solvay .................... Solvay Advanced Polymers, LLC
MQ................................................... Methylsilicone pot. gold cyan................... Potassium Gold Cyanide SPE ANTEC ...... Society of Plastics Engineers Annual
NASA..................... National Aeronautics and Space potas....................................................... Potassium Technical Conference
Administration PP .....................................................Polypropylene sq-ft ...................................................... square foot
NBR................................................... Nitrile Rubber PPA ............................................... Polyphthalamide sq-in...................................................... square inch
Nippon Gohsei Nippon Synthetic Chemical Industry PPE.......................................... Polyphenylene Ether sq-m................................................... square meter
Company Limited
ppm .............................................. parts per million SR.......................................................Silicone Resin
Nippon Zeon ...............................ZEON Corporation
PPO........................................ Polyphenylene Oxide SRF.................................. Semi-Reinforcing Furnace
nm ......................................................... nanometer
PPS........................................Polyphenylene Sulfide sub. .......................................................... sublimate
no. .............................................................. number
P-PVC ......................... Plasticized Polyvinyl Chloride TBP ............................................ Tributyl Phosphate
non-metal. ...........................................non-metallic
prem. ........................................................ premium TBT............................................ Tetrabutyl Titanate
NR................................................... Natural Rubber
Pro. ...................................................... Proceedings TCA ...........................................Trichloroacetic Acid
OBDPO........................... Octabromodiphenyl Oxide
prod. ...................................................... production TDI ......................................... Toluene Diisocyanate
Occidental..........Occidental Petroleum Corporation
prop. glycol................................... Propylene Glycol tech........................................................... technical
oct.................................................................octane
PS.......................................................... Polystyrene TEL .................................................. Tetraethyl Lead
org. ........................................................... organical
pt .................................................................... point temp. ...................................................temperature
ox....................................................................oxide
PTT.........................Polytrimethylene Terephthalate tetrachlorocyclopent.........Tetrachlorocyclopentane
oz ...................................................................ounce
PUR.................................................... Polyurethane TFE ........................................... Tetrafluoroethylene
PA ........................................................... Polyamide
PVA .............................................. Polyvinyl Acetate TFE/P ...................... Tetrafluoroethylene Propylene
PAI ................................................. Polyamideimide
PVC ............................................. Polyvinyl Chloride The Purdue Frederick Co. ......The Purdue Frederick
PARA................................................. Polyarylamide Company
PVDC...................................Polyvinylidene Chloride
PASU............................................... Polyarylsulfone TMTD .......................Tetramethyl Thiuram Disulfide
PVDF ................................... Polyvinylidene Fluoride
PBI ............................................. Polybenzimidazole TNT .................................................. Trinitrotoluene
PVF ............................................. Polyvinyl Fluoride
PBT .............................. Polybutylene Terephthalate TPAU............ Polyester Polyurethane Thermoplastic
PVMQ .............................Methylphenylvinylsilicone
PC ..................................................... Polycarbonate Elastomer
qt ............................................................... quantity
PCBs................................ Polychlorinated Biphenyls TPE................................... Thermoplastic Elastomer
Quadrant EPP ............ Quadrant Engineering Plastic
PCL............................................... Polycaprolactone Products TPEU ........... Polyether Polyurethane Thermoplastic
PCT....Polycyclohexylenedimethylene Terephthalate Elastomer
R.H. .............................................. relative humidity
PCTG .............................................. Glycol Modified trans. ...................................................... transverse
reg. .............................................................. regular
PolycyclohexylenedimethyleneTerephthalate tsp.............................................................teaspoon
res..............................................................resistant
PE........................................................ Polyethylene turpen.................................................... Turpentine
RIM PUR . Reaction Injection Molding Polyurethane
PEEK...................................... Polyetheretherketone U.S. .................................................... United States
RTPU .........................Rigid Thermoplastic Urethane
PEG .......................................... Polyethylene Glycol UHMWPEUltrahigh Molecular Weight Polyethylene
SABIC ................ Saudi Basic Industries Corporation
PEI....................................................Polyetherimide UL .................................. Underwriters Laboratories
Abbreviations xix
unsatd.................................................. unsaturated VDMA .............Verband Deutscher Maschinen- und wat. ...............................................................Water
UP ........................................ Unsaturated Polyester Anlagenbau weatherom. ....................................weatherometer
Urylon........................ Urylon Plastics Incorporation VMQ ......................................... Methylvinylsilicone wt. ................................................................weight
USP .............................United States Pharmacopeia vol................................................................volume XPE................................... Crosslinked Polyethylene
UV...........................................................Ultraviolet vulcan. ...................................................Vulcanizate yr ..................................................................... year
VDF ........................................... Vinylidene Fluoride w/ .................................................................... with yrs................................................................... years
Introduction to Plastics and Elastomers
1.1.1 Polymerization
Polymerization is the process of chemically bonding monomer building blocks to form large molecules. Commercial polymer
molecules may contain thousands of repeat units. Polymerization transpires by one of several methods. The two most common
methods are addition and condensation polymerization.
In addition polymerization, the polymer molecule grows by the addition of one new monomer at-a-time via a chain
reaction. The addition reaction occurs through the opening of double or triple bonds in the monomer. Each new monomer
unit creates an active site for the next attachment. The net reaction is shown in Figure 1.1. Many plastics are formed in this
manner. Some of the plastics created by addition polymerization include polyethylene, polyvinyl chloride (PVC), acrylics,
polystyrene, polytetrafluoroethylene and polyoxymethylene (acetal).
Another common reaction mechanism is condensation polymerization. The reaction between monomer units and the grow-
ing polymer chain end groups releases a small molecule, which is often water, as shown in Figure 1.2. This reversible reaction
reaches equilibrium and halts, unless this small molecule by-product is removed. Polyesters (which have the by-product
methanol) and polyamides (water is the by-product) are among the plastics made by this process.
Understanding the polymerization process used to make a particular plastic gives insight into the nature of the plastic. For
example, plastics made via condensation polymerization, in which water is released, can degrade when exposed to water at
high temperatures. Polyesters such as polyethylene terephthalate (PET) can degrade by a process called hydrolysis when
exposed to acidic, basic, or even some neutral environments, severing the polymer chains.
1.1.2 Copolymers
A copolymer is a polymer formed when two (or more) monomers are linked in the same polymer chain, as opposed to a
homopolymer where only one monomer is used. If three monomers are used, it is called a terpolymer.
Monomers are sometimes symmetric; such as ethylene CH2QCH2, which has the same structure on the two sides of an
imaginary axis. In ethylene the axis is perpendicular to the double bond at the midpoint. The arrangement of the monomers in
a copolymer can be head-to-tail, head-to-head, or tail-to-tail. Since a copolymer consists of at least two types of repeating
unit, copolymers can be classified based on how these units are arranged along the chain. These classifications include:
Alternating copolymer
Random copolymer (statistical copolymer)
Block copolymer
Graft copolymer
When the two monomers (A and B) are arranged in an alternating fashion, the polymer is called, of course, an alternating
copolymer:
A and B are different monomers which do not have to be present in any particular ratios such as one to one. In a random
copolymer, the two monomers may follow in any order:
In a block copolymer, each type of monomer is grouped together, and all of the others are grouped together. A block
copolymer can be thought of as two homopolymer chains joined together:
A polymer that consists of large grouped blocks of each of the monomers is also considered a block copolymer:
When chains of a polymer made of monomer B are grafted onto a polymer chain of monomer A, it is called a branched
(or graft) copolymer:
Introduction to Plastics and Elastomers xxiii
High-impact polystyrene, or HIPS, is an example of graft copolymer. Its a polystyrene backbone with chains of polybuta-
diene grafted onto the backbone. The polystyrene imparts the material strength, but the rubbery polybutadiene chains give it
resilience to make it less brittle.
1.1.7 Blends
Polymers can often be blended. Occasionally, blended polymers have properties that exceed those of either of the constituents.
For instance, blends of polycarbonate resin and PET polyester, originally created to improve the chemical resistance of poly-
carbonate, actually have fatigue resistance and low temperature impact resistance which is superior to either of the individual
polymers.
Sometimes a material is needed that possesses some of the properties of one polymer, and some of the properties of
another. Instead of returning to the lab and trying to synthesize a brand new polymer with all the properties wanted, two poly-
mers can be melted together to form a blend, which will hopefully have some of the properties of both.
Two polymers that do actually mix well are polystyrene and polyphenylene oxide. A few other examples of polymer pairs
that will blend are:
Polyethylene terephthalate with polybutylene terephthalate
Polymethyl methacrylate with polyvinylidene fluoride
Phase-separated mixtures are obtained when one tries to mix most polymers. Strangely enough, the phase-separated materi-
als often turn out to be rather useful. They are called immiscible blends.
Polystyrene and polybutadiene are immiscible. When polystyrene is mixed with a small amount of polybutadiene, the two
polymers do not blend. The polybutadiene separates from the polystyrene into little spherical blobs. If this mixture is viewed
under a high power microscope something that looks like the picture in Figure 1.5 would be seen.
Introduction to Plastics and Elastomers xxv
Multiphase polymer blends are of major economic importance in the polymer industry. The most common examples involve
the impact modification of a thermoplastic by the microdispersion of a rubber into a brittle polymer matrix. Most commercial
blends consist of two polymers combined with small amounts of a third, compatibilizing polymer ] typically a block or graft
copolymer.
Multiphase polymer blends can be easier to process than a single polymer with similar properties. The possible blends
from a given set of polymers offer many more physical properties than do the individual polymers. This approach has shown
some success but becomes cumbersome when more than a few components are involved.
Blending two or more polymers offers yet another method of tailoring resins to a specific application. Because blends are
only physical mixtures, the resulting polymer usually has physical and mechanical properties that lie somewhere between the
values of its constituent materials. For instance, an automotive bumper made from a blend of polycarbonate resin and thermo-
plastic polyurethane elastomer gains rigidity from the polycarbonate resin and retains most of the flexibility and paintability
of the polyurethane elastomer. For business machine housings, a blend of polycarbonate and ABS resins offers the enhanced
performance of polycarbonate flame retardancy and UV stability at a lower cost.
1.1.8 Elastomers
Elastomers are a class of polymeric materials that can be repeatedly stretched to over twice their original length, with little or
no permanent deformation. Elastomers can be made of either thermoplastic or thermoset materials and generally are tested
and categorized differently than rigid materials. They are commonly selected according to their hardness and energy absorp-
tion characteristics, properties rarely considered in rigid thermoplastics. Elastomers are found in numerous applications, such
as automotive bumpers and industrial hoses.
1.1.9 Additives
Additives encompass a wide range of substances that aid processing or add value to the final product. Found in virtually all
plastics, most additives are incorporated into a resin family by the supplier as part of a proprietary package. For example, you
can choose standard polycarbonate resin grades with additives for improved internal mold release, UV stabilization, and flame
retardancy; or nylon grades with additives to improve impact performance.
Additives often determine the success or failure of a resin or system in a particular application. Many common additives
are discussed in the following sections. Most additives are added in very small amounts.
a decrease in mold shrinkage. Particulate fillers typically reduce shrinkage by a percentage roughly equal to the volume per-
centage of filler in the polymer, an advantage in tight tolerance molding.
1.1.9.2 Combustion Modifiers, Fire, Flame Retardants and Smoke Suppressants
Combustion modifiers are added to polymers to help retard the resulting parts from burning. Generally required for electrical
and medical housing applications, combustion modifiers and their amounts vary with the inherent flammability of the base
polymer. Polymers designed for these applications often are rated using an Underwriters Laboratories rating system. Use these
ratings for comparison purposes only, as they may not accurately represent the hazard present under actual fire conditions.
1.1.9.3 Release Agents, Lubricants, Slip and Antiblocking Agents
External release agents are lubricants, liquids or powders, which coat a mold cavity to facilitate part removal. Internal release
agents can accomplish the same purpose. The identity of the release agent is rarely disclosed, but they are frequently fine
fluoropolymer powders, called micropowders, silicone resins or waxes.
1.1.9.4 Catalysts
Catalysts, substances that initiate or change the rate of a chemical reaction, do not undergo a permanent change in composi-
tion and do not become part of the molecular structure of the final product. Occasionally, they are used to describe a setting
agent, hardener, curing agent, promoter, etc., and are added in minute quantities, typically less than one percent.
1.1.9.5 Impact Modifiers and Tougheners
Many plastics do not have sufficient impact resistance for their intended use. Rather than change to a different type of plastic,
they can be impact modified in order to fulfill the performance in use requirements. The addition of modifiers, called impact
modifiers or tougheners, can significantly improve impact resistance. This is one of the most important additives. There are
many suppliers and chemical types of these modifiers.
General-purpose impact modification is a very low level of impact modification. It improves room temperature impact
strength but does not take into account any requirements for low temperature (below 0C) impact strength. For most of these
types of applications only low levels of impact modifier are required (,10%).
Low temperature impact strength is required for applications that require a certain level of low temperature flexibility and
resistance to break. This is, for example, the case for many applications in the appliance area. For this purpose, modifier
levels between 5]15% of mostly reactive modifiers are necessary. Reactive modifiers can bond chemically to the base
polymer.
Super-tough impact strength may be required for applications that should not lead to a failure of the part, even if hit at low
temperatures (230 to 240C) at high speed. This requirement can only be fulfilled with high levels (20]25%) of reactive
impact modifier, along with a low glass transition temperature.
Figure 1.6 shows the effect of one toughener on the izod performance of a common Nylon 6 plastic. The toughener used
in this graph is DuPonts FusabondsN MN-493D. The graph shows the improvement in notched izod performance vs. tem-
perature with differing levels of toughener additive. As shown in this figure, the performance can be dramatically improved.
1.1.9.6 UV Stabilizers
Sunshine and its UV radiation have a deteriorating effect on many polymers. UV stabilizers play an important role in plastics
for external uses by counteracting the effects of the sun. UV stabilizers are used in plastic items such as greenhouse film, out-
door furniture, and automotive plastic parts. The amounts added are very small, generally less than one percent.
1.1.9.7 Antistatic Agents
Anti-static additives are capable of modifying the properties of plastics in such a way that they become anti-static,
conductive, and/or improve electromagnetic interference shielding (EMI). Carbon fibers, conductive carbon powders, and
other electrically-conductive materials are used for this purpose.
1.1.9.8 Plasticizers
Plasticizers are added to help maintain flexibility in a plastic. Various phthalates are commonly used for this purpose. Since
they are small molecules they may extract or leach out of the plastic, causing a loss of flexibility with time.
1.1.9.9 Pigments, Extenders, Dyes, Mica
Pigments are added to impart color to a plastic, but they may also affect the physical properties. Extenders are usually cheap
materials added to reduce the cost of plastic resins. Dyes are colorants and are chemically different than pigments. Mica is a
special pigment added to impact sparkle or a metallic appearance.
Introduction to Plastics and Elastomers xxvii
Figure 1.6 Notched Izod of BASF Ultramids B-3Nylon 6 Modified with Various Levels of Fusabonds N NM-493D Toughener.
Many plastics families have their own ASTM and ISO guidelines for testing. These guidelines provide standard testing
procedures including sample preparation and often define the subclassification of the plastic products. Some of these stan-
dards are given in Table 1.7.
It may be necessary to ask some or all of the following questions to define the performance needs of a plastic material for
a particular application.
1) WHAT LOAD WILL THE PLASTIC PART HAVE TO CARRY?
(a) Will it carry high loads?
(b) What will the highest load be?
xxx Introduction to Plastics and Elastomers
Table 1.7 ISO and ATSM Standards for Common Polymer Families
Polymer Family ISO Standardsa ASTM Standards
Acrylonitrile-Butadiene-Styrene resin (ABS) DIS 2580]1&2: 2003 D4673]02
Styrene-Acrylonitrile resin (SAN) 4894]1&2: 1997 D4203]07
Polystyrene (PS) 1622]1&2: 1994 D4549]03
Polystyrene, impact (PS-I) 2897]1&2: 2003 D4549]03
Polypropylene (PP) D4101]06b
1873]1&2: 1997
D5857]05a
Polyethylene (PE) 1872]1&2: 2007 D4976]06
Polyvinyl chloride, plasticized (PVC-P) 2898]1&2: 1997 D2287]96
Polyvinyl chloride, unplasticized (PVC-U) 1163]1&2: 1995 D1784]06a
Polymethylmethacrylate (PMMA) 8257]1&2: 2001 D788]06
Polycarbonate (PC) 7391]1&2: 2006 D3935]02
Acetals (POM) 9988]1&2: 2006 D6778]06
Polyamides (PA) 1874]1&2: 2006 D4066]01a
Thermoplastic polyester 7792]1&2: 1997 D5927]03
Polyketone (PK) 15526]1&2: 2000 D5990]00
Polyphenylether (PPE, PPO) 15103]1&2: 2000 D4349]96
Thermoplastic polyester elastomer 14910]1&2: 1997 D6835]02
E-CTFE D3275]06
Poly(Vinylidene Fluoride) (PVDF) D3222]05
Polytetrafluoroethylene (PTFE) D4894]04
Ethylene-Tetrafluoroethylene Copolymer (ETFE) D3159]06
Perfluoroalkoxy (PFA) D3307]06
Tetrafluoroethylene-Hexafluoropropylene Copolymer (FEP) D2116]02
Part 1 of each ISO material standard addresses the Designatory Properties and part 2 describes specific tests, test specimens, and test conditions.
a
(4) WHAT TEMPERATURES WILL THE PART SEE AND FOR HOW LONG?
(a) What is the maximum temperature the material will see in use?
(b) What is the minimum temperature the material will see in use?
(c) How long will the material be at these temperatures?
(d) Will the material have to withstand impact at the low temperature?
(5) WILL THE MATERIAL BE EXPOSED TO CHEMICALS OR MOISTURE?
(a) Will the material be exposed to normal relative humidity?
(b) Will the material be submerged in water? If so, at what temperature?
(c) Will the material be exposed to steam?
(d) Will the material be autoclaved?
(e) Will the material be painted?
(f) Will the material be submerged or wiped with solvents or other chemicals? If so, which ones?
(g) Will the material be exposed to chemical or solvent vapors? If so, which ones and at what temperature?
(h) Will the material be exposed to other materials that can outgas or leach detrimental materials, such as plasticizers?
Fluoroplastics, crystalline, and thermoset materials generally exhibit good chemical resistance. Chemical resistance is the
subject of this book and the associated database.
xxxii Introduction to Plastics and Elastomers
2.1 Introduction
Plastics and elastomers often come in to contact with various chemicals in applications in chemical processing, semiconduc-
tor, automotive, aerospace, consumer and other applications. Even in mundane applications, plastics have to contend with the
ever present ambient oxygen and moisture. Further, many applications rely on interactions (or lack thereof) of polymers with
chemicals in industries such as microlithography, membrane technologies, medical devices, pharmaceuticals, plastics recy-
cling, and drug delivery.
This chapter describes the general effects of chemicals on plastics and elastomers (elastomers) which will be referred to as
polymers for brevity purposes. Even metals are not immune from attack by chemicals. Water corrodes iron, acids dissolve
many metals. There is, however, a perception that metals are by and large not attacked by a large number of chemicals, start-
ing with organic solvents. This perception is basically correct, but it does not apply to plastics. Solvents, acids, bases and
other chemicals affect the overwhelming majority of polymers.
There are several examples of different types of interactions between plastics and chemicals. Water does not wet polyethyl-
ene or polypropylene or affect them in a perceptible manner. Acetone and other ketones swell polyvinyl chloride. Polyvinyl
alcohol is completely dissolved in water. Cellulosic polymers react with acids such as concentrated sulfuric acid, as mani-
fested by the color of the polymer turning black. In this reaction the acid removes the hydrogen and oxygen molecules from
the cellulosic in the form of water leaving behind the carbon backbone that is naturally black.
An ever-present issue when working with plastics and elastomers is that nearly every one of them is affected by chemicals
upon exposure. A chemical environment often poses one of the most demanding tests of a polymers durability. There are
two basic ways that a chemical can affect a polymer: chemical and physical. The extent of the impact of the chemicals varies
based on a variety of factors. Foremost among these factors are the chemical structure and composition of the polymers, and
the properties of the impacting chemical. Increasing the temperature of the environment compounds the effects. There are
other factors that influence the severity of the effect of chemicals on plastics and rubbers, which are described in this chapter.
present in the form of vapor, the equilibrium water absorption is a function of the relative humidity (partial pressure of vapor).
At low partial pressures, there is a linear relationship between water absorption (and consequent dimensional change), accor-
dance to Henrys Law ] the concentration of water within a thermoplastic equals a constant times the partial pressure.[1]
Variations from the ideal case, that is a uniform distribution of water molecules, are caused by molecular clusters of water
that form at high concentrations, and by site effects around a molecular bond. Site effects, which occur in nylons, polye-
sters, polyurethanes and polycarbonates, account for the dramatic changes in physical properties when dry, molded material is
moisture-conditioned.
When a thermoplastic is immersed in water, effects of the water are more rapid than those in a vapor environment.
Attainment of equilibrium is controlled to a greater degree by sorption. Sorption becomes a direct function of water contact,
or wetting. No thermoplastic is wet-out completely by water, since the surface tension of water (72.5 dynes/cm) is too high.
(2.1)
(2.2)
Since they are condensation reactions, Le Chateliers Principle predicts that the addition of water to nylon will push the
reactions back toward the left. This would break the polymer chains down into monomers again with the release of water by
hydrolysis. Hydrolysis reduces the strength of nylon and causes it to become brittle as well. Fortunately, polymerization is
also an exothermic process, so at room temperature the forward direction of the polymerization reaction is heavily favored.
Nylon-66 soaked in water becomes brittle after about 2 months at 66C.
Thermoplastic polyesters have similar physical properties to nylon 66 but have much lower moisture absorption. They are
attacked by ethylene dichloride and is susceptible to hydrolysis in prolonged contact with hot water.
Oxygen has a prominent role in degrading polymers such as polyvinyl chloride (PVC), polyolefins, polyvinyl fluoride, and
others. PVC degrades by a thermo-oxidative mechanism in the presence of oxygen at elevated temperatures. Degradation usually
begins by oxygen attack at an unsaturation point followed by a loss of hydrochloric acid and decrease in unsaturation of the chain.
Consequently, the polymer molecule is destabilized resulting in chain scission or splitting of the chain into two fragments.[3]
Effect of Chemicals on Plastics and Elastomers xxxvii
Many elastomers undergo reactions with oxygen. When elastomers oxidize, they lose mechanical properties, such as tensile
strength, may become rough or cracked on the surface, or discolor. These typical manifestations of oxidation are referred to
as aging when they occur during normal use. The net effect of oxidation on the elastomers is degradation of their chemical
structures. For example, natural rubber and polyolefinic elastomers are among elastomers that are subject to oxidation. Aging
and degradation can be inhibited or retarded by incorporating antioxidants in the compounds.[4]
eliminate dissolution of the polymer in oils and solvents. Another strategy is the introduction of halogen atoms in elastomeric
macromolecules, which impart a number of improvements to their properties, including an increase in chemical resistance
and decrease in swelling in hydrocarbon solvents and oils.
Swelling in liquids is frequently used to estimate the molecular weight between effective cross-links in conventionally vul-
canized elastomers. This molecular weight, Mc, is calculated from the Flory]Rehner in equation (2.3):
1=3
Mc 52 V1 2 22 =2=ln122 12 11 22 2:3
where Mc, is the molecular weight between effective cross-links, 2 is the density of the elastomer in the unswollen state, V1 is
the molar volume of the swelling agent, 2 is the volume fraction of the elastomers in the swollen state, and K1 is the
Flory]Huggins solvent interaction parameter.[4]
2.4.2 Plasticization
A plasticizer is defined as an additive that is incorporated into a plastic to impart softness and flexibility in order to facilitate
the manufacturing process. When added to a plastic, a plasticizer increases its workability and flexibility. Plasticizers tend to
lower the melt viscosity, the glass transition temperature and/or the elastic modulus.[16]
Plasticizers are low molecular or oligometric additives that are compatible with rigid thermoplastic polymers, rendering
them semi-rigid or leathery/rubbery in behavior. They can be either non-polymeric materials or polymer impact modifiers.
Some forms of copolymerization can also produce a degree of internal plasticizing. Certain plasticizers can also perform other
functions, assisting in viscosity control, in the dispersion of particulate additives such as fillers and pigments, and general
lubrication of the compound.[17]
Some plastics may be mixed with high boiling temperature, low-volatility liquids to give products of lower Tg. An impor-
tant example is PVC, which is often mixed with liquids such as di-iso-octyl phthalate, tritolyl phosphate, or other diesters to
reduce the Tg to below room temperature. Some solvents, including aromatic and chlorinated hydrocarbons, ketones and
ethers, will soften PVC by acting as additional plasticizers
The liquid plasticizers work by increasing the free volume in the materials thus facilitating the segmental motions that con-
stitute the glass transition process. If their volatility is a problem in a given case, it may be possible to use either a polymeric
plasticizer or a chemically bound plasticizer. The resultant plasticized PVC is flexible and to some degree quite rubbery.
Other commonly plasticized materials are cellulose acetate and cellulose nitrate. It is important to note that such plasticizers
may be able to modify the chemical properties of the plastic material, since the plasticizer may be readily extracted by certain
chemicals and chemically attacked by others while the base polymer remains unaffected.[18]20]
2.4.3 Dissolution or Polymer Solubility [Adopted from D. J. Hourston, Degradation of Plastics and Polymer, in
Shreirs Corrosion, 4th ed, edit T. J. A. Richardson, Elsevier, Oxford, UK, pp 2369-2386, 2010]
The solution properties of polymers have been subjected to intensive study, in particular to complex mathematical
treatment.[21]23] This section will, however, confine the discussion to a qualitative and practical level.[21]
One chemical will be a solvent for another if the molecules are able to co-exist on a molecular scale, that is, the molecules
show no tendency to separate. In these circumstances, the two species are said to be compatible. The definition concerns equi-
librium properties and gives no indication of the rate of solution, which will depend on other factors such as temperature, the
molecular size of the solvent and the size of voids in the solute.
Molecules of two different species will be able to coexist if the force of attraction between different molecules is not less
than the forces of attraction between two like molecules of either species. This is shown more clearly by reference to Figure 2.1,
which shows two types of molecules A and B. The average forces between like molecules are FAA and FBB, and the average
forces between dissimilar molecules are FAB. If FAA was the largest of these three forces, then the A molecules would tend to
congregate or cohere, rejecting the B molecules. A similar phase separation would occur if FBB was the greatest.
It is, therefore, seen that only when FAB$FAA and FAB$FBB will coexistence or compatibility be possible. Obviously, if it
is possible to obtain some measure of these forces, it should be possible to make predictions about polymer solubility. What
then is a suitable measure of the forces holding like molecules together? One would expect the latent heat of vaporization, L,
to exceed the cohesion energy by an amount corresponding to the work done by evaporation, an amount approximating to
RT, where R is the gas constant and T the absolute temperature. Such a diagram of (L2RT) might be a sufficient measure if
all of the molecules were of about the same size.
However, it is reasonable to suppose that compatibility should not be greatly affected by molecular size and that the shorter
polymer molecules in Figure 2.2(a) should be just as compatible as the longer ones in Figure 2.2(b), although their theoretical
Effect of Chemicals on Plastics and Elastomers xxxix
Figure 2.1 Two different molecular species will be compatible if FAB $ FAA and FAB $ FBB. In other circumstances the
molecules will tend to separate if they have sufficient energy for molecular movement.
latent heats of vaporization will be greatly different. In such circumstances, a reduced diagram of (L2RT)/M will give a mea-
sure of intermolecular energy per unit weight. Similarly, a measure of the intermolecular or cohesion energy per unit volume
will be given by the following expression, where D is the density.
L2RT
M=D
Equation (2.4) is known as the cohesive energy density[21,24] with units of megapascal. The square root of this expression
is more commonly encountered in quantitative studies, and is known as the solubility parameter and given the symbol .
s
L2RT
5 MPa1=2 2:4
M=D
The solubility parameter is, thus, an experimentally determinable property, at least for low-molecular weight materials. In
the case of polymers that cannot be vaporized without decomposition, a method of calculating this from a knowledge of struc-
tural formula has been devised by Small and others.[24,25] It is now possible to provide an estimate of FAA and FBB, but the
magnitude of FAB has to be considered separately for each different system.
2.4.3.1 Amorphous Nonpolar Polymers and Amorphous Nonpolar Solvents
It is generally assumed in these circumstances, by analogy with gravitational and electrostatic attractions, that FAB will be equal
to the geometric mean of FAA and FBB. Thus, if by definition FAA.FBB, then, FAA.FAB.FBB. Considering these conditions, it
can be seen that compatibility will occur between amorphous nonpolar polymers and solvents only when FAA5FAB5FBB; that is,
when polymer and solvent have similar solubility parameters (in practice to within about 2 MPa1/2). Reference to the values of
in Tables 2.1 and 2.2 provides examples of this. For example, natural rubber (unvulcanized) (516.5) is soluble in toluene
(518.2) and carbon tetrachloride (517.5) but not in ethanol (525.9). Cellulose diacetate (523.2) is soluble in acetone
(520.4), but not in methanol (529.6) or toluene (518.2). It should be noted that apart from the problem of achieving a
molecular level of dispersion, it is not necessary for the solvent to be liquid; it may be an amorphous solid. Such tables are of
greatest use with nonpolar materials with values of d not exceeding 19.4 MPa1/2 and when the polymers are amorphous.
2.4.3.2 Crystalline Nonpolar Polymers and Amorphous Solvents
Most polymers of regular structure will crystallize if cooled below the melting point, Tm. This is in accordance with the ther-
modynamic law that a process will occur only if there is a decrease in Gibbs free energy (2G) in going from one state to
another. Such a decrease occurs on crystallization as the molecules pack in a regular fashion. Since a process occurs only
when it is accompanied by a decrease in free energy, there is no reason why a crystalline nonpolar polymer should dissolve in
xl Effect of Chemicals on Plastics and Elastomers
a solvent at temperatures well below the melting point. However, as the melting point is approached, the TS term in the
equation below increases.
G5H2TS 2:5
Here, T is the absolute temperature, S the entropy change, and H the enthalpy change. So, with increasing temperature,
G can become negative and dissolution can therefore occur.
Hence, at room temperature, there are no solvents for polyethylene, polypropylene, poly-4-methylpentene-1, polyacetal or
polytetrafluoroethylene, but at temperatures of about 30C below their melting points, solvents of similar solubility parameter
are effective. It should also be noted that at room temperature swelling may occur in the amorphous zones of the polymer in
the presence of solvents of similar solubility parameter.
2.4.3.3 Amorphous Nonpolar Polymers and Crystalline Solvents
This situation is identical to the previous one, and occurs, for example, when paraffin wax is mixed into rubber above its
melting point. On cooling, the paraffin wax tends to crystallize, some of it on the surface of the rubber. Such a bloom is one
way of protecting a diene rubber from ozone attack.
2.4.3.4 Amorphous Polar Polymers and Solvents
Molecules are held together by one, or more, of four types of forces: dispersion, dipole, induction and hydrogen bonding. In
the case of aliphatic hydrocarbons, the so-called dispersion forces predominate. However, many covalent bonds contain
dipoles, with one end being partially positively charged and the other partially negatively charged. Such dipoles may interact
with dipoles on other molecules and lead to enhancement of the total intermolecular attraction. Molecules that possess dipoles
and interact in this way are said to be polar. Many well-known solvents (e.g., water) and polymers (e.g., PVC) are polar and
it is generally considered that for interaction both the solubility parameter and their degrees of polarity should match. This is
usually expressed in terms of partial polarity,24 which expresses the fraction of total forces which are due to dipole bonds.
Some figures for the partial polarities (P) of solvents are given in Table 2.2, but there is a lack of quantitative data on the par-
tial polarities of polymers. A comparison of polarities has to be made by common sense rather than by a quantitative
approach. For example, hydrocarbon polymers would be expected to have a negligible polarity and would therefore be more
likely to dissolve in toluene rather than diethyl ketone, although both have similar solubility parameters.
2.4.3.5 Crystalline Polar Polymers and Solvents
It has already been pointed out that at temperatures well below their melting point, crystalline nonpolar polymers will not inter-
act with solvents, and similar considerations can apply to a large number of polar crystalline polymers. It has, however, been
Effect of Chemicals on Plastics and Elastomers xli
Table 2.2 Solubility Parameters () and Partial Polarities (P) of Some Common Solvents
Solvent (MPa1/2) P Solvent (MPa1/2) P
Dimethylpropane 12.9 0 Chloromethane 19.8 ]
2-Methylpropene 13.7 0 Dichloromethane 19.8 ]
Hexane 14.9 0 1,2-Dichloroethane 20.0 0
Ethoxyethane 15.1 0.03 Cyclohexane 20.2 ]
Octane 15.5 0 Carbon disulfide 20.4 0
Methyleyctonexane 15.9 0 Acetone 20.4 0.69
2-Methylpropanoate 16.1 ] Octanol 21.0 0.04
2,4-Dimethylpentan-3-one 16.3 0.3 Butanenitrile 21.4 0.72
2-Methyl butyl acetate 16.3 ] Hexanol 21.8 0.06
Cyclohexane 16.7 0 2-Butanol 22.0 0.11
2,2-Dichloropropane 16.7 ] Pyridine 22.2 0.17
3-Methyl-1-butyl acetate 16.9 ] Nitroethane 22.6 0.71
Pentyl acetate 17.3 0.07 Butanol 23.3 0.10
Tetrachloromethane 17.5 0 Cyclohexanol 23.3 0.08
Hexan-2-one 17.7 0.4 2-propanol 23.4 ]
Piperidine 17.7 ] Propanol 24.3 0.15
Xylene 18.0 0 Dimethyl formamide 24.7 0.77
Methoxymethane 18.0 ] Hydrogen cyanide 24.7 ]
Toluene 18.2 0 Acetic acid 25.7 0.30
1,2-Dichloropropane 18.4 ] Ethanol 25.9 0.27
Ethyl acetate 18.6 0.17 Formic acid 27.5 ]
Benzene 18.8 0 Methanol 29.6 0.39
4,4-Hydroxymethylpentan-2-one 18.8 ] Phenol 29.6 0.06
Trichloromethane 19.0 0.02 Glycerol 33.7 0.47
1, 1,2-Trichloroethene 19.0 0 Water 47.7 0.82
Tetrachlorethane 19.2 0.01
2-Hydroxyethoxyethan-2-ol 19.6 ]
possible to find solvents for some polar, crystalline polymers such as the nylons, polyvinyl chloride and the polycarbonates. This
is because of specific interactions between polymer and solvent that may often occur by, for example, hydrogen bonding.
For example, nylon-6,6 will dissolve in formic acid, glacial acetic acid and phenol, solvents that not only have similar solubil-
ity parameters but also are capable of acting as proton donors while the carbonyl groups on the nylon act as proton acceptors.
More interesting examples are PVC and the polycarbonate of bis-phenol A ] both slightly crystalline polymers. It is
noticed here that while dichloromethane is a good solvent and tetrahydrofuran a poor solvent for the polycarbonate, the
reverse is true for PVC, yet all four materials have similar solubility parameters. It would seem that the explanation is that a
form of hydrogen bonding occurs between the polycarbonate and methylene chloride and between PVC and tetrahydrofuran.
In other words, there is a specific interaction between each solvent pair:
Many studies have been made to assess the propensity for hydrogen bonding of chemical structures.24 As a result, the fol-
lowing broad generalizations may be made.
xlii Effect of Chemicals on Plastics and Elastomers
1. Proton donors include highly halogenated compounds such as chloroform and pentachlorethane; less halogenated materials
are weaker donors.
2. Polar acceptors include, in roughly descending order of strength, amines, ethers, ketones, aldehydes, and esters, with aro-
matic materials usually being more powerful than aliphatic ones.
3. Some materials such as water, alcohols, carboxylic acids, and primary and secondary amines may be able to act simulta-
neously as proton donors and acceptors. Cellulose and polyvinyl alcohol are two polymers that also function in this way.
4. A number of solvents such as the hydrocarbons, carbon disulfide and carbon tetrachloride are quite incapable of forming
hydrogen bonds.
2.4.3.6 Rubbers and Thermosetting Plastics
Covalently cross-linked rubbers and plastics cannot dissolve without chemical change. They will, however, swell in solvents
of similar solubility parameter, the degree of swelling decreasing with increasing cross-link density. The solution properties
of the thermoplastic elastomers, which are two-phase materials, are much more complex and depend on whether or not the
rubber phase and the thermoplastic domains are dissolved by the solvent.
scale relaxation processes that take place in the amorphous regions of a glassy polymer, causing volume contraction and den-
sification of the sample. The polymer structure remains unchanged but the local packing of the chain alters. This leads to
dimensional changes and alteration of physical properties such as brittleness, tensile strength, and the glass transition tempera-
ture. As the extent of physical aging increases there are corresponding decreases in the enthalpy, the specific volume and the
fracture toughness, while increases in glass transition temperature, the yield stress and tensile modulus of the material may
also be observed.
Localized concentration of the stress due to local geometrical features as notches, voids, and inclusions will increase the
stress and modify the nature of the stress field. Craze initiation is accelerated by stress fields with high dilational stress and
retarded under hydrostatic pressure.
There are critical polymer properties and variables which affect ESC. The higher the molar mass the longer the polymer
chains, which results in more tie molecules and increased ESC resistance. ESC resistance decreases with increasing the degree
of crystallinity. Higher co-monomer content and longer co-monomer short chain branches (higher ]olefins) provide better
ESC resistance of linear low density polyethylene due to a decrease in the degree of crystallinity. Increased pigment content
usually decreases the ESC resistance. The thermal history of the material and the processing conditions are also important fac-
tors for the ESC resistance behavior of the polymers.
under the desired conditions. Tensile properties of the exposed sample can then be measured. Any loss of elongation and ten-
sile strength would indicate environmental stress cracking.
solubility coefficient.
No permeation will occur if either the diffusion or the solubility coefficients are zero. The lowest diffusion rates occur
with crystalline polymers below the Tg, since there is very little space through which diffusing molecules may pass.[18]
Amorphous polymers below the Tg have a somewhat higher permeability, but diffusion is still difficult. For amorphous poly-
mers above the Tg, that is, in the flexible and rubbery states, there is more space (free volume) available through which dif-
fusing molecules may pass, and so these materials show comparatively high diffusion rates with low molecular-weight
diffusing fluids. For crystalline polymers between Tg and Tm, the diffusion rate is very dependent on the degree of
crystallization.
Several factors affect the permeation rate of the polymer. Temperature increase raises the permeation rate for two rea-
sons. First, solubility of the permeant increases in the polymer at higher temperatures. Second, polymer chain movements
are more abundant which allow easier diffusion of the permeant. The permeation rate of gases increases at higher partial
pressures. For liquids, permeation rates rise with an increase in the concentration of the permeant. Unless the permeant spe-
cies are highly soluble in the polymer, the permeation rate increases linearly with pressure, concentration, and the area of
permeation.
The effect of thickness is usually nonlinear. The permeation rate is very high at a low thickness and rapidly decreases with
an increase in the thickness. After a critical thickness is reached, the effect of thickness is diminished and the permeation rate
reaches a plateau. At lower thicknesses, the effect of surface structure begins to play a significant role in the permeation. A
more oriented (ordered) surface will serve to inhibit permeation.
Chemical and physical characteristics of the polymer have powerful effects on the rate of permeation, by as much as four
orders of magnitude.[32] Chemical affinity for the permeant, intermolecular forces such as van der Waals and hydrogen bond-
ing forces, degree of crystallinity, and degree of cross-linking are the influential variables.
A similarity of chemical structures of the polymer and the permeant will promote solubility and permeation rate. Higher inter-
molecular forces of the polymer result in less permeation because of the resistance that they present to the development of space
between adjacent molecules, which is required for the passage of the permeant. Crystallinity is an important factor, which can be
controlled during the processing of the polymer. The crystalline phase can be considered impermeable by most species because of
its orderly structure (packing) which usually minimizes its specific volume. This means that there is little or no free space among
the polymer chains for the passage of a permeant. The amorphous phase has the opposite construction - it is disorderly with inter-
chain space available for permeation. Cross-linking acts somewhat similar to crystallinity, though is less effective, in limiting
space for permeation. Cross-linking is size-dependent and smaller species may permeate.
The molecular size of the permeant, its chemical structure, and its condensation characteristics affect permeation.
Diffusion of the permeant increases as its molecular size decreases, thus contributing to an increase in permeation. Molecular
structure is important. A polar chemical will normally have a lower permeation rate in a nonpolar polymer than a nonpolar
species and vice versa. This is due to the ability of chemicals with similar structures to the polymer to swell the polymer, that
is, to create space between the chains for permeation. A more easily condensed chemical will also be more effective in swell-
ing the polymer, resulting in higher rates of permeation.
Effect of Chemicals on Plastics and Elastomers xlv
2.6.1 ASTM D543 Method Specification for Evaluating the Resistance of Plastics to Chemical Reagents
The following description has been provided by American Society for Testing Materials (Ref. www.ASTM.org) for the D543
test method.
Significance and Use
The choice of types and concentrations of reagents, duration of immersion or stress, or both, temperature of the test, and proper-
ties to be reported is necessarily arbitrary. The specification of these conditions provides a basis for standardization and serves
as a guide to investigators wishing to compare the relative resistance of various plastics to typical chemical reagents.
Correlation of test results with the actual performance or serviceability of plastics is necessarily dependent upon the simi-
larity between the testing and the end-use conditions. For applications involving continuous immersion, the data obtained in
short-time tests are of interest only in eliminating the most unsuitable materials or indicating a probable relative order of
resistance to chemical reagents.
Evaluation of plastics for special applications involving corrosive conditions should be based upon the particular reagents
and concentrations to be encountered. The selection of test conditions should take into account the manner and duration of
xlvi Effect of Chemicals on Plastics and Elastomers
contact with reagents, the temperature of the system, applied stress, and other performance factors involved in the particular
application.
Scope
1. These practices cover the evaluation of all plastic materials including cast, hot-molded, cold-molded, laminated resinous
products, and sheet materials for resistance to chemical reagents. These practices include provisions for reporting changes
in weight, dimensions, appearance, and strength properties. Standard reagents are specified to establish results on a compa-
rable basis. Provisions are made for various exposure times, stress conditions, and exposure to reagents at elevated tem-
peratures. The type of conditioning (immersion or wet patch) depends upon the end-use of the material. If used as a
container or transfer line, specimens should be immersed. If the material will only see short exposures or will be used in
close proximity and reagent may splash or spill on the material, the wet patch method of applying reagent should be used.
2. The effect of chemical reagents on other properties shall be determined by making measurements on standard specimens
for such tests before and after immersion or stress, or both, if so tested.
2.6.2 ASTM D1239-07 Method Specification for Resistance of Plastic Films to Extraction by Chemicals
The following description has been provided by American Society for Testing Materials (Ref. www.ASTM.org) for the
D1239-07 test method.
Significance and Use
This test method is intended to be a rapid empirical test to determine the loss of the plasticizer or other extractable compo-
nents from the plastic film when immersed in liquids commonly used in households.
Scope
This test method for resistance of plastic films to chemicals covers the measurement of the weight loss of film after immer-
sion in chemicals.
1. There is no known ISO equivalent to this test method.
2. Film is defined as sheeting having nominal thickness not greater than 0.25 mm [0.010 in.], in accordance with
Terminology D 883.
2.6.3 ASTM D3681-06 Method Specification for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe in a Deflected Condition
The following description has been provided by American Society for Testing Materials (Ref. www.ASTM.org) for the
D3681-06 test method.
Significance and Use
This test method evaluates the effect of a chemical environment on pipe when in a deflected condition. It has been found that
effects of chemical environments can be accelerated by strain induced by deflection. This information is useful and necessary
for the design and application of buried fiberglass pipe.
Pipe of the same diameter but of different wall thicknesses will develop different strains with the same deflection. Also,
pipes having the same wall thickness but different constructions making up the wall may develop different strains with the
same deflection.
Scope
1. This test method covers the procedure for determining the chemical-resistant properties of fiberglass pipe in a deflected
condition for diameters 4 in. (102 mm) and larger. Both glass-fiber-reinforced thermosetting resin pipe (RTRP) and glass-
fiber-reinforced polymer mortar pipe (RPMP) are fiberglass pipes.
2. For the purposes for this standard, polymer does not include natural polymers.
2.6.4 ASTM D4398-07 Method Specification for Determining the Chemical Resistance of Fiberglass-Reinforced
Thermosetting Resins by One-Side Panel Exposure
The following description has been provided by American Society for Testing Materials (Ref. www.ASTM.org) for the
D4398-07 test method.
Significance and Use
The results obtained by this test method may serve as a guide in, but not as the sole basis for, predicting the possible perfor-
mance of the particular glass-fiber-reinforced thermosetting resin laminate in the one-side exposure to the specific environ-
ment under evaluation. No attempt has been made to incorporate into the test method all of the factors that may enter into the
serviceability of a glass-fiber-reinforced resin structure when subjected to chemical environments.
Effect of Chemicals on Plastics and Elastomers xlvii
This test method provides for the determination of changes in the physical properties of the test panel and test media dur-
ing and after the one-side exposure in the test media. Determination of changes include: Barcol hardness, appearance of panel,
appearance of test media, flexural properties, and thickness.
Scope
This test method is intended for use in the evaluation of the chemical resistance of fiberglass-reinforced thermosetting resins
that are subjected to one-side panel exposure to specific environments. It takes into consideration the cold wall effects and
radiation losses of heat transfer through the laminate wall.
2.6.5 ASTM C868-02(2008) Method Specification for Chemical Resistance of Protective Linings
The following description has been provided by American Society for Testing Materials (Ref. www.ASTM.org) for the C868-
02(2008) test method.
Significance and Use
The results obtained by this test method should serve as a guide in, but not as the sole basis for, selection of a lining material
for particular application. Simple chemical-resistance evaluations of the lining materials may be performed more conveniently
by other pertinent methods as a prescreening test for this procedure in accordance with Test Methods C 267 and D 471.
Scope
1. This test method covers a procedure for evaluating the chemical resistance of a polymer-based protective lining in immer-
sion service. The method closely approximates the service conditions, including the temperature differential between the
external and internal surfaces of the equipment, which may accelerate permeation of the lining by a corrosive media.
2. This test may be used to simulate actual field use conditions insofar as a qualitative evaluation of the lining system after a
predetermined period of exposure.
2.6.6 ISO 4600 Method Specification for Determination of environmental stress cracking (ESC) ] Ball or Pin Impression
Method (Ref. www.ISO.org)
Abstract The test is applicable to finished products and to test specimens, prepared by molding and/or machining, and can be
used for the assessment of both environmental stress cracking of a plastic product or material exposed to different environ-
ments, and for the determination of ESC of different plastics materials exposed to a specific environment.
2.6.7 ISO 4599 Method Specification for Plastics ] Determination of resistance to environmental stress cracking
(ESC) ] Bent Strip Method (Ref. www.ISO.org).
2.6.7.1 ISO 6252 Method Specification for Plastics ] Determination of environmental stress cracking (ESC) ]
Constant-tensile-stress Method (Ref. www.ISO.org)
Abstract
The test is applicable to test specimens, prepared by molding and/or machining, and can be used for the assessment of both
environmental stress cracking of a plastic product or material exposed to different environments, and for the determination of
ESC of different plastics materials exposed to a specific environment.
c. The grade of polymer. Many types of polymers are available in different grades that vary greatly in chemical resistance.
d. The compound itself. Compounds designed for other outstanding properties may be poorer in performance in a chemical
than one designed especially for fluid resistance.
Each polymer is rated (Table 2.3) for use in individual chemicals at room temperature.[33] Where multiple chemicals are in
use, refer to the rating of the most aggressive fluid when evaluating polymer performance. Polymers are rated as:
1. Recommended. Little or minor effect, 0]5% volume swell where applicable.
2. Minor to moderate effect. Rubber parts probably still useful in most applications, 5]10% volume swell where applicable.
3. Moderate to severe effect. Rubber parts useful in some static applications only. 10]20% volume swell where applicable.
4. Not recommended.
No data available or insufficient evidence.
References
1. Choosing Plastics for Chemical Resistance, SABIC Innovative Plastics, LNP Specialty Compounds, 2008.
2. The chemical resistance of Makrolon, Bayer Corporation, www.plastics.Bayer.com, File No.: KU28057-0409 en, Issued Sep 28, 2004.
3. Thermal Degradation of Polyvinyl Chloride, D. Braun, http://old.iupac.org/publications/pac/1971/pdf/2602x0173.pdf, The International Union of Pure
and Applied Chemistry, 2010.
4. J. G. Drobny, Handbook of Thermoplastic Elastomers, PDL, Elsevier, 2007.
5. Margenau, H., and Kestner, N., Theory of Intermolecular Forces, 3rd ed., Pergamon Press, London, 1971.
6. Hirschfelder, J. O., ed., Intermolecular Forces, Interscience, New York, 1967.
7. Intermolecular Forces, Discussion, Faraday Society, Vol. 40, 1965.
8. Israelachvilli, J. N., and Tabor, D., Prog. Surf. Member. Sci., 7(1), 1973.
9. Israelachvilli, J. N., Quart. Rev. Biophys., 6(4):341, 1974.
10. Israelachvilli, J. N., in Yearbook of Science and Technology, pp. 2331, McGraw-Hill, New York, 1976.
11. Krupp, H., Adv. Colloid Interface Sci., 1:111, 1967.
12. Hirschfelder, J. O., Curtiss, C. F., and Bird, R. B., Molecular Theory of Gases and Liquids, Wiley, New York 1954]
13. Principles of polymer science, P. Bahadur, N. V. Sastry, Alpha Science International, Ltd; 2nd ed, February 2005.
14. Introduction to polymer viscoelasticity by Montgomery T. Shaw, William J. MacKnight, Wiley-Interscience; 3rd ed, New York, 2005.
15. Erman, B., and Mark, J.E., in Science and Technology of Rubber, 2nd ed (Mark, J.E., Erman, B., and Eirich, F.R., Eds.), Academic Press, San Diego,
CA, 1994, p. 190.
16. Materials Selection Deskbook, Chapter: 3: Properties and selection of materials, N. P. Cheremisinoff, Elsevier, Noyes Publications, New York,
1996.
17. Additives for Plastics Handbook, Chapter: Chapter 14: Modifying Processing Characteristics: Plasticizers, J. Murphy, Elsevier, 2001.
18. D. J. Hourston, Degradation of Plastics and Polymer, in Shreirs Corrosion, 4th ed, edit T. J. A. Richardson, Elsevier, Oxford, UK, pp 2369-2386,
2010.
19. www.dsm.com/en_US/html/drs/polymericplasticizers.htm, December, 2010
20. Wilson, A. S. Plasticisers Principles and Practice; The University Press: Cambridge, 1995]
21. Cowie, J. M. G.; Arrighi, V. Polymers: Chemistry & Physics of Modern Materials, 3rd ed.; CRC Press, 2007.
22. Yamakawa, H. Modern Theory of Polymer Solutions; Harper & Row: New York, 1971.
Effect of Chemicals on Plastics and Elastomers li
23. Richards, E. G. An Introduction to Physical Properties of Large Molecules in Solution; Cambridge University Press: Cambridge, 1980.
24. Van Krevelen, D. W. Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive
Group Contributions, 3rd ed.; Elsevier: Amsterdam, 1990.
25. Small, P. A. J. J. Appl. Chem. 1953, 3, 7178.
26. Young, R. J., and Lovell, P. A., Introduction to Polymers, 2nd ed., Chapman & Hall, London, 1991.
27. Environmental Stress Cracking: the Phenomenon and Its Utility, Lustiger, A, in Failure of Plastics, pp. 305-329, 1986, Carl Hanser Verlag.
28. A. Lustiger, A. and Corneliussen, R. D., The role of crazes in the crack growth of polyethylene, J. Materials Science, V. 22, No. 7, pp2470-2476,
1987.
29. Brown, H. R., A theory of the environmental stress cracking of polyethylene, Polymer, V 19, pp1186-1188, October 1978.
30. Brostow, W., Corneliussen, R. D. Failure of Plastics; Hanser: Munich, 1986.
31. Jansen, J. A., Environmental Stress Cracking The Plastic Killer, Advanced Materials & Processes, pp50-53, June 2004.
32. Imbalzano, J. F., Washburn, D. N., and Mehta, P. M., Basics of Permeation and Environmental Stress Cracking in Relation to Fluoropolymers,
Technical Information, DuPont Co., No. H-24240-1, Nov. 1993.
33. DuPont Performance Elastomers, www.dupontelastomers.com, December, 2010.
Part 1: Acrylic Polymers and Copolymers
1.1 Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Accelerated D1501 or L-P-406a, 10 9 No crazing, warping Plexiglas V044; Rohm & Haas; Specimen:
Weathering method 6024; or unmolding According to ASTM D1925-63T for
Fluorescent sunlamp observed yellowness index change
with dew, 10 cycles
" 10 9 " Plexiglas V045; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
" 10 9 " Plexiglas V052; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
" 10 9 " Plexiglas V811; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
" 10 9 " Plexiglas V825; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
" 10 9 " Plexiglas V920; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
" 10 9 " Plexiglas VH; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
" 10 9 " Plexiglas VM; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
" 10 9 " Plexiglas VS; Rohm & Haas; Specimen:
According to ASTM D1925-63T for
yellowness index change
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Acetic Acid (cont) 5 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
5 25 7 8 0.6 Plexiglas VS; Rohm & Haas
5 25 7 8 0.6 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
5 25 9 Excellent resistance Plexiglas V; Rohm & Haas
5 .25 7 Good resistance "
5 .25 7 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
75 23 2 Not recommended for
use
75 65 2 "
100 23 7 3 Crazed or whitened 3.22 NAS 10; Novacor Chemicals
100 23 7 3 " 3.22 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 2 Partly dissolved NAS 10; Novacor Chemicals
100 23 28 2 " NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
glacial 100 25 7 0 Dissolved Plexiglas V044; Rohm & Haas
" 100 25 7 0 " Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 100 25 7 0 " Plexiglas V045; Rohm & Haas
" 100 25 7 0 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 100 25 7 0 " Plexiglas V045FH; Rohm & Haas
" 100 25 7 0 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 100 25 7 0 " Plexiglas V052; Rohm & Haas
" 100 25 7 0 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 100 25 7 0 " Plexiglas V811; Rohm & Haas
" 100 25 7 0 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 100 25 7 0 " Plexiglas V825; Rohm & Haas
3
4
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Acetic Acid (cont) glacial 100 25 7 0 Dissolved Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 100 25 7 0 " Plexiglas V920; Rohm & Haas
" 100 25 7 0 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 100 25 7 0 " Plexiglas VM; Rohm & Haas
" 100 25 7 0 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 100 25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 100 25 7 0 " Plexiglas VMHF; Rohm & Haas
" 100 25 7 0 " Plexiglas VS; Rohm & Haas
" 100 25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 25 2 Not recommended for Plexiglas V; Rohm & Haas
use
" 65 2 "
" 0 Not resistant Acrylite FF; CYRO Industries
Acetone 100 23 7 0 Completely dissolved NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
25 7 0 Dissolved Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
25 7 0 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Acetone (cont) 25 7 0 Dissolved Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 2 Not recommended for Plexiglas V; Rohm & Haas
use
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
2 Do not use as a Acrysteel IGP; Aristech
cleaner-remover
Alcoholic Beverages 20 3 Not suitable for XT; CYRO Industries; Specimen:
packaging Containers, bottles
Aluminum Chloride 23 8 Excellent resistance -
no recognizable attack
65 8 "
Aluminum Sulfate 23 8 "
65 8 "
Ammonia 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Ammonium ,49 8 " Acrylite FF; CYRO Industries
Chloride
,49 8 " Acrylite FF
Ammonium 10 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Hydroxide Containers, bottles
10 20 "
10 23 7 9 0.24 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
10 23 7 9 No visible change 0.24 "
10 23 28 9 0.17 "
10 23 28 9 No visible change 0.17 "
5
6
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ammonium 10 25 7 9 0.5 Plexiglas V044; Rohm & Haas; Specimen:
Hydroxide (cont) In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 8 0.6 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
10 25 Plexiglas V; Rohm & Haas
10 25 9 Excellent resistance "
10 ,49 Acrylite FF; CYRO Industries
10 ,49 8 Resistant "
10 .25 Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
10 .25 9 Excellent resistance "
28 23 7 9 0.44 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
28 23 7 9 No visible change 0.44 "
28 23 28 9 0.37 "
28 23 28 9 No visible change 0.37 "
28 25 7 9 0.3 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 9 0.3 Plexiglas V045; Rohm & Haas; Specimen:
Acrylic
In accordance with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ammonium 28 25 7 9 0.3 Plexiglas V045FH; Rohm & Haas;
Hydroxide (cont) Specimen: In accordance with ASTM
D543
28 25 7 9 0.3 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 9 0.3 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 9 0.3 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 9 0.3 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 9 0.4 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 9 0.4 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
28 25 7 9 0.4 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
concentrated 28 25 Plexiglas V; Rohm & Haas
" 28 25 9 Excellent resistance "
" 28 .25 Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
" 28 .25 9 Excellent resistance "
23
23 6 Good - minor attack
65
65 5 Fair - limited use
concd. ,49 Acrylite FF; CYRO Industries
" ,49 8 Resistant "
Amyl Acetate 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 2 " " Acrylite; Specimen: Molded, tested @
50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " Cyrolite G20; Specimen: 50% Relative
Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
7
8
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Amyl Acetate 20 3 Susceptible to attack XT; Specimen: 50% Relative Humidity,
(cont) low stress
Acrylic
Containers, bottles
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Animal Oils 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Aniseed 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Aromatic low molecular weight 20 3 Not suitable for XT; CYRO Industries; Specimen:
Hydrocarbons packaging Containers, bottles
Baby Oil 20 8 Suitable for packaging "
Bath Oils 20 8 " "
Battery Acid ,49 8 Resistant Acrylite FF; CYRO Industries
Bay Leaves 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Beer 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Benzaldehyde 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Benzene 100 23 7 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 7 0 Completely dissolved "
20 Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
9
10
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Benzene (cont) 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 Susceptible to attack "
20 XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
20 3 Susceptible to attack "
25 7 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 Dissolved "
25 7 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 Dissolved "
25 7 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 Dissolved "
25 7 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 Dissolved "
25 7 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 Dissolved "
25 7 0 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 "
25 7 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 Dissolved "
25 7 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 Dissolved "
25 7 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 Dissolved "
25 7 Plexiglas VS; Rohm & Haas; Specimen: In
Acrylic
accordance with ASTM D543
25 7 0 Dissolved "
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Benzene (cont) 25 Plexiglas V; Rohm & Haas
25 2 Not recommended for "
use
65 "
65 2 Not recommended for "
use
Acrylite FF; CYRO Industries
0 Not resistant "
Acrysteel IGP; Aristech
2 Do not use as a "
cleaner-remover
Benzoic Acid 23 8 Excellent resistance -
no recognizable attack
65 8 "
Bleach bleaching powder 0]2 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
bleaching powder; 0]2 20 8 " Cyrolite G20; CYRO Industries; Specimen:
solution 50% Relative Humidity
" 0]2 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
bleaching powder; paste 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Boric Acid 23 8 Excellent resistance -
no recognizable attack
65 8 "
Bromine 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 Susceptible to attack Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Butyl Acetate 0 Not resistant Acrylite FF; CYRO Industries
Butyl Alcohol butanol 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 3 Susceptible to attack Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
11
12
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Butyl Alcohol (cont) butanol 20 3 Susceptible to attack XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
" 23 2 Not recommended for
use
" 65 2 "
Butyric Acid 23 2 "
65 2 "
Calcium Chloride 23 8 Excellent resistance -
no recognizable attack
65 8 "
satd. ,49 8 Resistant Acrylite FF; CYRO Industries
Calcium Hydroxide 23 5 Fair - limited use
65 2 Not recommended for
use
Calcium 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Hypochlorite Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
,49 8 " Acrylite FF; CYRO Industries
Calcium Nitrate 23 8 Excellent resistance -
no recognizable attack
65 8 "
Calcium Sulfate 23 8 "
65 8 "
Carbon Bisulfide 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 2 Not recommended for
use
65 2 "
Carbon Dioxide 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
Acrylic
50% Relative Humidity
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Carbon Dioxide 20 8 Resistant XT; CYRO Industries; Specimen: 50%
(cont) Relative Humidity, low stress
23 6 Good - minor attack
65 6 "
Carbon Monoxide 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 6 Good - minor attack
65 6 "
Carbon 100 23 7 0 Completely dissolved NAS 10; Novacor Chemicals; Specimen:
Tetrachloride 50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
23 5 Limited resistance Acrylite FF; CYRO Industries
23 2 Not recommended for
use
25 7 2 Attacked; edge 25 Plexiglas V044; Rohm & Haas; Specimen:
swelling In accordance with ASTM D543
25 7 2 " 25 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 " 25 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 2 " 25 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 " 25 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 " 25 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 1 " 28 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 1 Attacked 211 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 1 " 211 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 1 " 224 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
13
14
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Carbon 25 2 Not recommended for Plexiglas V; Rohm & Haas
Tetrachloride (cont) use
65 2 "
Chlorinated 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Hydrocarbons Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Chlorinated 20 3 Not suitable for XT; CYRO Industries; Specimen:
Solvents packaging Containers, bottles
Chlorine 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 Susceptible to attack Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
dry 23 6 Good - minor attack
wet 23 5 Fair - limited use
dry 65 5 "
wet 65 2 Not recommended for
use
Chloroacetic Acid 23 2 "
65 2 "
Chlorobenzene 23 2 "
65 2 "
Chloroform 23 2 "
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
Chlorophenol 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Chocolate milk chocolate 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Chocolate (cont) milk chocolate 20 8 Resistant Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Chromic Acid 40 23 7 9 No visible change 0.09 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
40 23 28 9 " 0.11 "
40 25 7 4 Discolored 4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
40 25 7 4 " 4 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
40 25 7 4 " 4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
40 25 7 4 " 4 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
40 25 7 4 " 4 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
40 25 7 4 " 4 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
40 25 7 4 " 4 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
40 25 7 2 Attacked; discolored Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
40 25 7 2 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
40 25 7 2 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
40 25 5 Fair resistance Plexiglas V; Rohm & Haas
40 .25 2 Not recommended for Plexiglas V; Rohm & Haas; Specimen:
use Literature lists test temperature as
elevated
20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
15
16
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Chromic Acid (cont) 23 5 Limited resistance Acrylite FF; CYRO Industries
65 2 Not recommended for
use
Cinnamon 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Citric Acid 1 23 7 9 No visible change 0.08 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
1 23 28 9 " 0.09 "
10 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
10 25 7 9 0.4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.4 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 8 0.7 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
10 25 9 Excellent resistance Plexiglas V; Rohm & Haas
10 ,49 8 Resistant Acrylite FF; CYRO Industries
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Citric Acid (cont) 10 .25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
23 8 Excellent resistance -
no recognizable attack
65 8 "
Cloves 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Cod Liver Oil 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Coffee 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Cooking Oils 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Copper Chloride 23 8 Excellent resistance -
no recognizable attack
65 8 "
Copper Sulfate 23 8 "
65 8 "
Corn Oil 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Cottonseed Oil 20 8 " "
edible grade 25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
17
18
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Cottonseed Oil edible grade 25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
(cont) Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 25 9 Excellent resistance Plexiglas V; Rohm & Haas
edible ,49 8 Resistant Acrylite FF; CYRO Industries
edible grade .25 5 Fair resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Cresol 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Cyclohexane 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 Susceptible to attack Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Detergents heavy duty 0.25 25 7 9 0.5 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V044; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V045; Rohm & Haas; Specimen:
Acrylic
In accordance with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Detergents (cont) heavy duty 0.25 25 7 9 0.5 Plexiglas V045; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 0.25 25 7 9 0.5 Plexiglas V045FH; Specimen: In
accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V052; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V811; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V825; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas V920; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas VM; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 0.25 25 7 9 0.5 Plexiglas VMHF; Specimen: In accordance
with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 0.25 25 7 9 0.5 Plexiglas VS; Specimen: In accordance
with ASTM D543
solution, heavy grade 0.3 25 7 Good resistance Plexiglas V; Rohm & Haas
" 0.3 25 7 " Plexiglas V
" 0.3 .25 7 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
19
20
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Detergents (cont) solution, heavy grade 0.3 .25 7 Good resistance Plexiglas V; Specimen: Literature lists test
temperature as elevated
solutions 23 7 9 No visible change 0.12 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
" 23 7 9 " 0.12 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
" 23 28 9 " 0.1 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
" 23 28 9 " 0.1 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
soln., heavy duty ,49 8 Resistant Acrylite FF; CYRO Industries
" ,49 8 " Acrylite FF
Diacetone Alcohol 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Diamyl Phthalate 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
1,2-Dibromoethane 20 2 Susceptible to attack " "
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Dibutyl Phthalate 20 2 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 2 " " Acrylite; Specimen: Molded, tested @
50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " Cyrolite G20; Specimen: 50% Relative
Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
20 3 " XT; Specimen: 50% Relative Humidity,
Acrylic
low stress
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Dibutyl Sebacate 25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 5 Fair resistance Plexiglas V; Rohm & Haas
.25 5 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
1,2-Dichloroethane 100 23 7 0 Completely dissolved NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
23 2 Not recommended for
use
25 7 0 Dissolved Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
21
22
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
1,2-Dichloroethane 25 7 0 Dissolved Plexiglas V825; Rohm & Haas; Specimen:
(cont) In accordance with ASTM D543
25 7 0 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 2 Not recommended for Plexiglas V; Rohm & Haas
use
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
Diesel Fuels diesel oil ,49 8 Resistant "
Diethyl Ether 100 23 7 2 Partly dissolved NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 2 " "
23 2 Not recommended for
use
25 7 3 Rubbery; swollen Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 3 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 3 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 3 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 3 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 3 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 3 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 3 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Diethyl Ether (cont) 25 7 3 Rubbery; swollen Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 3 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 5 Fair resistance Plexiglas V; Rohm & Haas
65 2 Not recommended for
use
.25 2 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
0 Not resistant Acrylite FF; CYRO Industries
Diethylene Glycol 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Dioctyl Phthalate 0 Not resistant Acrylite FF; CYRO Industries
1,4-Dioxane 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Electron Beam 1 megarad 8 100 Impact retained is dart Acrycal MP CP1000IG; Continental;
Radiation impact per ASTM Specimen: 3.2 mm (0.125 in) thick
D3209 GB (4 lbs dart samples
weight)
2 megarads 8 100 " "
3 megarads 8 100 " "
4 megarads 8 100 " "
5 megarads 8 100 " "
5 megarads, tested 5 The thinner the "
14 days stored at room plastic; the faster the
temperature after yellowness index
exposure drops
5 megarads, tested 1 day 4 " "
stored at 30C after
exposure
23
24
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Electron Beam 5 megarads, tested 1 day 7 The thinner the Acrycal MP CP1000IG; Continental;
Radiation (cont) stored at 50C after plastic; the faster the Specimen: 3.2 mm (0.125 in) thick
exposure yellowness index samples
drops
5 megarads, tested 1 day 9 " "
stored at 80C after
exposure
5 megarads, tested 1 day 3 " "
stored at room
temperature after
exposure
5 megarads, tested 6 " "
30 days stored at room
temperature after
exposure
5 megarads, tested 7 " "
60 days stored at room
temperature after
exposure
5 megarads, tested 4 " "
7 days stored at room
temperature after
exposure
5 megarads, tested 9 " "
90 days stored at room
temperature after
exposure
1 megarad 8 97.1 Impact retained is dart Acrycal MP CP924G; Continental;
impact per ASTM Specimen: 3.2 mm (0.125 in) thick
D3209 GB (4 lbs dart samples
weight)
2 megarads 8 95.6 " "
3 megarads 7 93.7 " "
4 megarads 7 91.6 " "
5 megarads 7 89.5 " "
5 megarads, tested 3 The thinner the "
14 days stored at room plastic; the faster the
temperature after yellowness index
exposure drops
5 megarads, tested 1 day 3 " "
stored at 30C after
exposure
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Electron Beam 5 megarads, tested 1 day 5 The thinner the Acrycal MP CP924G; Continental;
Radiation (cont) stored at 50C after plastic; the faster the Specimen: 3.2 mm (0.125 in) thick
exposure yellowness index samples
drops
5 megarads, tested 1 day 7 " "
stored at 80C after
exposure
5 megarads, tested 1 day 2 " "
stored at room
temperature after
exposure
5 megarads, tested 5 " "
30 days stored at room
temperature after
exposure
5 megarads, tested 6 " "
60 days stored at room
temperature after
exposure
5 megarads, tested 3 " "
7 days stored at room
temperature after
exposure
5 megarads, tested 7 " "
90 days stored at room
temperature after
exposure
1 megarad 8 97.1 Impact retained is dart Acrycal MP CP927G; Continental;
impact per ASTM Specimen: 3.2 mm (0.125 in) thick
D3209 GB (4 lbs dart samples
weight)
2 megarads 8 94.8 " "
3 megarads 7 91.9 " "
4 megarads 7 89.8 " "
5 megarads 7 87.1 " "
5 megarads, tested 4 The thinner the "
14 days stored at room plastic; the faster the
temperature after yellowness index
exposure drops
5 megarads, tested 1 day 3 " "
stored at 30C after
exposure
25
26
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Electron Beam 5 megarads, tested 1 day 6 The thinner the Acrycal MP CP927G; Continental;
Radiation (cont) stored at 50C after plastic; the faster the Specimen: 3.2 mm (0.125 in) thick
exposure yellowness index samples
drops
5 megarads, tested 1 day 8 " "
stored at 80C after
exposure
5 megarads, tested 1 day 3 " "
stored at room
temperature after
exposure
5 megarads, tested 5 " "
30 days stored at room
temperature after
exposure
5 megarads, tested 6 " "
60 days stored at room
temperature after
exposure
5 megarads, tested 3 " "
7 days stored at room
temperature after
exposure
5 megarads, tested 8 " "
90 days stored at room
temperature after
exposure
Ethers 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Ethyl Acetate 100 23 7 0 Completely dissolved NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Acrylic
25 7 0 Dissolved Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ethyl Acetate (cont) 25 7 0 Dissolved Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 2 Not recommended for Plexiglas V; Rohm & Haas
use
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
2 Do not use as a Acrysteel IGP; Aristech
cleaner-remover
Ethyl Alcohol 30 23 5 Limited resistance Acrylite FF; CYRO Industries
50 23 7 9 No visible change 0.18 NAS 10; Novacor Chemicals
50 23 7 9 " 0.18 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
50 23 28 9 " 0.23 NAS 10; Novacor Chemicals
50 23 28 9 " 0.23 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
50 25 7 5 2 Plexiglas V044; Rohm & Haas
50 25 7 5 2 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
50 25 7 5 2 Plexiglas V045; Rohm & Haas
50 25 7 5 2 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
27
28
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ethyl Alcohol (cont) 50 25 7 5 2 Plexiglas V045FH; Rohm & Haas
50 25 7 5 2 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
50 25 7 5 2 Plexiglas V052; Rohm & Haas
50 25 7 5 2 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
50 25 7 5 2 Plexiglas V811; Rohm & Haas
50 25 7 5 2 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
50 25 7 5 2 Plexiglas V825; Rohm & Haas
50 25 7 5 2 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
50 25 7 4 3 Plexiglas V920; Rohm & Haas
50 25 7 4 3 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
50 25 7 2 5 Plexiglas VM; Rohm & Haas
50 25 7 2 5 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
50 25 7 2 5 Plexiglas VMHF; Rohm & Haas
50 25 7 2 5 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
50 25 7 1 7 Plexiglas VS; Rohm & Haas
50 25 7 1 7 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
aqueous 50 25 9 Excellent resistance Plexiglas V; Rohm & Haas
" 50 .25 9 " "
" 50 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
95 23 7 9 No visible change 0.28 NAS 10; Novacor Chemicals
95 23 7 9 " 0.28 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
95 23 28 8 " 0.52 NAS 10; Novacor Chemicals
95 23 28 8 " 0.52 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
Acrylic
discs in closed glass jars
95 25 7 3 4 Plexiglas V044; Rohm & Haas
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ethyl Alcohol (cont) 95 25 7 3 4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
95 25 7 3 4 Plexiglas V045; Rohm & Haas
95 25 7 3 4 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
95 25 7 3 4 Plexiglas V045FH; Rohm & Haas
95 25 7 3 4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
95 25 7 3 4 Plexiglas V052; Rohm & Haas
95 25 7 3 4 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
95 25 7 3 4 Plexiglas V811; Rohm & Haas
95 25 7 3 4 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
95 25 7 3 4 Plexiglas V825; Rohm & Haas
95 25 7 3 4 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
95 25 7 1 10 Plexiglas V920; Rohm & Haas
95 25 7 1 10 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
95 25 7 2 Swelled 28 Plexiglas VM; Rohm & Haas
95 25 7 2 " 28 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
95 25 7 2 " 28 Plexiglas VMHF; Rohm & Haas
95 25 7 2 " 28 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
95 25 7 2 " 33 Plexiglas VS; Rohm & Haas
95 25 7 2 " 33 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
95 25 7 Good resistance Plexiglas V; Rohm & Haas
95 .25 5 Fair resistance "
95 .25 5 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
95 0 Not resistant Acrylite FF; CYRO Industries
.15 20 3 Susceptible to attack Cyrolite G20; CYRO Industries
.15 20 3 " Cyrolite G20; CYRO Industries; Specimen:
29
50% Relative Humidity
30
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ethyl Alcohol (cont) .15 20 3 Susceptible to attack XT; CYRO Industries
.15 20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
0]15 20 8 Resistant Low stress Acrylite; CYRO Industries
0]15 20 8 " " Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
0]15 20 8 " Cyrolite G20; CYRO Industries
0]15 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]15 20 8 " XT; CYRO Industries
0]15 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
concentrated 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries
" 20 2 " " Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
23 2 Not recommended for
use
65 2 "
Ethyl Bromide 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Ethyl Butyrate 20 2 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Ethylene Glycol 20 6 Limited resistance Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
,49 8 Resistant Acrylite FF; CYRO Industries
Ethylene Oxide 12 54 0.17]0.25 9 Data from Novacor 100 Specimen: General purpose grade
report
12 54 0.17]0.25 9 " 100 100 Specimen: Toughened
Acrylic
with 88% Freon 12 54 0.17]0.25 9 " 100 Specimen: General purpose grade
" 12 54 0.17]0.25 9 " 100 100 Specimen: Toughened
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ethylene Oxide 100 54 0.17]0.25 9 Data from Novacor 100 Specimen: Gamma grade
(cont) report
100 54 0.17]0.25 9 " 100 Specimen: General purpose grade
100 54 0.17]0.25 9 " 100 100 Specimen: Toughened
2-Ethylhexyl 25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
Sebacate In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 7 Good resistance Plexiglas V; Rohm & Haas
.25 5 Fair resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Ferric Chloride 23 8 Excellent resistance -
no recognizable attack
65 8 "
Ferric Sulfate 23 8 "
65 8 "
Fluoboric Acid 23 8 "
65 8 "
Formaldehyde 37 23 8 "
37 65 6 Good - minor attack
31
32
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Fruit Juices 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Gasoline 100 23 7 2 Partly dissolved NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 2 " "
with benzene 20 2 Susceptible to attack Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 2 " Low stress "
without benzene 20 8 Resistant "
" 20 8 " Low stress "
motor fuel with benzene 20 3 Susceptible to attack Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
motor fuel without 20 6 Limited resistance "
benzene
motor fuel with benzene 20 3 Susceptible to attack XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
motor fuel without 20 6 Limited resistance "
benzene
23 5 " Acrylite FF; CYRO Industries
23 6 Good - minor attack
65 5 Fair - limited use
Glycerin ,49 8 Resistant Acrylite FF; CYRO Industries
Glycols 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
Hair Tonic 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Hexane 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 Limited resistance Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
,49 8 Resistant Acrylite FF; CYRO Industries
Acrylic
Hydrobromic Acid 25 23 6 Good - minor attack
25 65 5 Fair - limited use
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Hydrochloric Acid 10 20 8 Suitable for packaging XT; CYRO Industries
10 20 8 " XT; CYRO Industries; Specimen:
Containers, bottles
10 23 7 9 No visible change 0.05 NAS 10; Novacor Chemicals
10 23 7 9 " 0.05 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
10 23 28 9 " 0.05 NAS 10; Novacor Chemicals
10 23 28 9 " 0.05 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
10 25 7 9 0.4 Plexiglas V044; Rohm & Haas
10 25 7 9 0.4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045; Rohm & Haas
10 25 7 9 0.4 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045FH; Rohm & Haas
10 25 7 9 0.4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.4 Plexiglas V052; Rohm & Haas
10 25 7 9 0.4 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V811; Rohm & Haas
10 25 7 9 0.4 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V825; Rohm & Haas
10 25 7 9 0.4 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V920; Rohm & Haas
10 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas VM; Rohm & Haas
10 25 7 9 0.5 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas VMHF; Rohm & Haas
10 25 7 9 0.5 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
33
34
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Hydrochloric Acid 10 25 7 9 0.5 Plexiglas VS; Rohm & Haas
(cont)
10 25 7 9 0.5 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
10 25 9 Excellent resistance Plexiglas V; Rohm & Haas
10 .25 9 " "
10 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
37 23 6 Good - minor attack
37 65 5 Fair - limited use
38 23 7 9 No visible change 0.45 NAS 10; Novacor Chemicals
38 23 7 9 " 0.45 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
38 23 28 6 Discolored 0.78 NAS 10; Novacor Chemicals
38 23 28 6 " 0.78 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
38 25 7 2 Attacked; turbid Plexiglas V044; Rohm & Haas
38 25 7 2 " Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
38 25 7 2 " Plexiglas V045; Rohm & Haas
38 25 7 2 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
38 25 7 2 " Plexiglas V045FH; Rohm & Haas
38 25 7 2 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
38 25 7 2 " Plexiglas V052; Rohm & Haas
38 25 7 2 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
38 25 7 2 " Plexiglas V811; Rohm & Haas
38 25 7 2 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
38 25 7 2 " Plexiglas V825; Rohm & Haas
38 25 7 2 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
38 25 7 2 " Plexiglas V920; Rohm & Haas
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Hydrochloric Acid 38 25 7 2 Attacked; turbid Plexiglas V920; Rohm & Haas; Specimen:
(cont) In accordance with ASTM D543
38 25 7 2 " Plexiglas VM; Rohm & Haas
38 25 7 2 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
38 25 7 2 " Plexiglas VMHF; Rohm & Haas
38 25 7 2 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
38 25 7 2 " Plexiglas VS; Rohm & Haas
38 25 7 2 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
concentrated 38 .25 7 Good resistance Plexiglas V; Rohm & Haas
" 38 .25 7 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
20 2 Susceptible to attack Low stress Acrylite; CYRO Industries
20 2 " " Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
,49 8 Resistant Acrylite FF; CYRO Industries
Hydrocyanic Acid 23 8 Excellent resistance -
no recognizable attack
65 8 "
Hydrofluoric Acid 25 0 Not resistant Acrylite FF; CYRO Industries
40 23 7 9 0.49 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
40 23 28 6 Crazed or whitened 0.7 "
0]20 20 8 Resistant Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]20 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 6 Good - minor attack
35
65 5 Fair - limited use
36
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Hydrogen Peroxide 3 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
3 23 7 9 No visible change 0.08 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
3 23 28 9 " 0.08 "
3 25 7 8 0.6 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
3 25 7 8 0.6 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
3 25 7 8 0.7 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
3 25 9 Excellent resistance Plexiglas V; Rohm & Haas
3 ,49 8 Resistant Acrylite FF; CYRO Industries
3 .25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
28 23 7 9 No visible change 0.16 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
28 23 28 9 " 0.19 "
28 23 5 Limited resistance Acrylite FF; CYRO Industries
28 25 7 7 0.8 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Hydrogen Peroxide 28 25 7 7 0.8 Plexiglas V045; Rohm & Haas; Specimen:
(cont) In accordance with ASTM D543
28 25 7 7 0.8 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
28 25 7 7 0.8 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 7 0.8 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 7 0.8 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 7 0.8 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 7 1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
28 25 7 7 1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
28 25 7 7 1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
28 25 9 Excellent resistance Plexiglas V; Rohm & Haas
28 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
0]40 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
0]40 20 6 Limited resistance Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]40 20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Hydrogen Sulfide 23 5 Fair - limited use
65 5 "
Hypochlorous Acid 23 8 Excellent resistance -
no recognizable attack
65 5 Fair - limited use
Iodine Tincture of Iodine 5 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 5 20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 5 20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
37
38
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Isooctane 100 23 7 9 No visible change NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 9 " "
25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 7 Good resistance Plexiglas V; Rohm & Haas
.25 7 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Isopropyl Alcohol 95 0.01 0 Sample broke after Specimen: Impact modified
15 minutes; data from
Novacor Zylar
brochure
isopropanol 100 23 7 9 No visible change NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
" 100 23 28 9 " 20.06 "
" 20 5 Limited resistance Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
Acrylic
" 20 5 " Low stress "
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Isopropyl Alcohol isopropanol 20 3 Susceptible to attack Cyrolite G20; CYRO Industries; Specimen:
(cont) 50% Relative Humidity
" 20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 5 Limited resistance Acrylite FF; CYRO Industries
isopropanol 8 Acceptable as a Acrysteel IGP; Aristech
cleaner
Kerosene 100 23 7 9 No visible change 0.02 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 9 " "
20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Fuel Oil #2; ASTM D396 25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 25 7 Good resistance Plexiglas V; Rohm & Haas
,49 8 Resistant Acrylite FF; CYRO Industries
Fuel Oil #2; ASTM D396 .25 5 Fair resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
39
40
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Ketones 20 3 Not suitable for XT; CYRO Industries; Specimen:
packaging Containers, bottles
Lacquer Thinners 25 7 0 Dissolved Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 2 Not recommended for Plexiglas V; Rohm & Haas
use
.25 2 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
0 Not resistant Acrylite FF; CYRO Industries
Lactic Acid 23 8 Excellent resistance -
no recognizable attack
65 8 "
Lactic Acid Butyl 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Ester Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Lanolin 1.9 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Acrylic
Containers, bottles
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Lighter Fluid 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Liquors 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Magnesium 23 8 Excellent resistance -
Chloride no recognizable attack
65 8 "
Maleic Acid 23 6 Good - minor attack
65 5 Fair - limited use
Mayonnaise 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Methane 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Methyl Alcohol 30 23 Acrylite FF; CYRO Industries
30 23 5 Limited resistance "
100 23 7 6 1.08 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 7 7 No visible change 1.08 "
100 23 28 4 2.32 "
100 23 28 4 Crazed or whitened 2.32 "
100 Acrylite FF; CYRO Industries
100 0 Not resistant "
.15 20 Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
.15 20 3 Susceptible to attack "
.15 20 XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
.15 20 3 Susceptible to attack "
0]15 20 Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
41
42
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Methyl Alcohol 0]15 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
(cont) Molded, tested @ 50% Relative Humidity
0]15 20 Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]15 20 6 Limited resistance "
0]15 20 XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
0]15 20 6 Limited resistance "
concentrated 20 Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 2 Susceptible to attack " "
25 7 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 Attacked; turbid "
25 7 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 Attacked; turbid "
25 7 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 2 Attacked; turbid "
25 7 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 Attacked; turbid "
25 7 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 Attacked; turbid "
25 7 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 Attacked; turbid "
25 7 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 Attacked; turbid "
25 7 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 2 Attacked; turbid "
25 7 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
Acrylic
D543
25 7 2 Attacked; turbid "
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Methyl Alcohol 25 7 Plexiglas VS; Rohm & Haas; Specimen: In
(cont) accordance with ASTM D543
25 7 2 Attacked; turbid "
25 Plexiglas V; Rohm & Haas
25 5 Fair resistance "
65
65 2 Not recommended for
use
Acrysteel IGP; Aristech
8 Acceptable as a "
cleaner
Methyl Chloride 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Methyl Ethyl 20 2 " Low stress Acrylite; CYRO Industries; Specimen:
Ketone Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 2 Not recommended for
use
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
2 Do not use as a Acrysteel IGP; Aristech
cleaner-remover
Methylene Chloride 23 2 Not recommended for
use
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
2 Do not use as a Acrysteel IGP; Aristech
cleaner-remover
Milk 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
Mineral Oils 100 23 7 9 No visible change 0.02 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
43
44
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Mineral Oils (cont) 100 23 28 9 No visible change 0.02 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
White, USP 25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
White; USP 25 5 Fair resistance Plexiglas V; Rohm & Haas
,49 8 Resistant Acrylite FF; CYRO Industries
White; USP .25 2 Not recommended for Plexiglas V; Rohm & Haas; Specimen:
use Literature lists test temperature as
elevated
Motor Oils SAE 20 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
N,N- 100 23 7 0 Completely dissolved NAS 10; Novacor Chemicals; Specimen:
Dimethylformamide 50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
25 7 0 Dissolved Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 2 Not recommended for Plexiglas V; Rohm & Haas
use
.25 2 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
0 Not resistant Acrylite FF; CYRO Industries
Nail Polish 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Naphtha VM&P 8 Acceptable as a Acrysteel IGP; Aristech
cleaner
" 8 " Acrysteel IGP;
Natural Gas 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
45
46
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Natural Gas (cont) 20 8 Resistant Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Neats Foot Oil 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
n-Heptane 100 23 7 9 No visible change 0.05 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 9 " 0.12 "
20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 Limited resistance Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
Acrylic
25 9 Excellent resistance Plexiglas V; Rohm & Haas
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
n-Heptane (cont) ,49 8 Resistant Acrylite FF; CYRO Industries
.25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Nitric Acid 10 23 7 9 No visible change 0.06 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
10 23 28 9 " 0.06 "
10 25 7 9 0.4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.4 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 8 0.6 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
10 25 9 Excellent resistance Plexiglas V; Rohm & Haas
10 ,49 8 Resistant Acrylite FF; CYRO Industries
10 .25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
40 23 7 9 No visible change 0.09 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
40 23 28 8 Discolored 0.16 "
40 23 5 Limited resistance Acrylite FF; CYRO Industries
47
48
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Nitric Acid (cont) 40 25 7 2 Attacked 5 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
concentrated 40 25 7 2 " 5 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 40 25 7 2 " 5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 40 25 7 2 " 5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 40 25 7 2 " 5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 40 25 7 2 " 5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 40 25 7 2 " 5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 40 25 7 2 " 5 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 40 25 7 2 " 5 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 40 25 7 2 " 5 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
40 25 7 Good resistance Plexiglas V; Rohm & Haas
40 .25 5 Fair resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
65 23 2 Not recommended for
use
70 23 7 6 Discolored NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
concentrated 70 25 7 2 Attacked Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
70 25 7 2 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
70 25 7 2 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
70 25 7 2 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
70 25 7 2 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Nitric Acid (cont) 70 25 7 2 Attacked Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
70 25 7 2 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
70 25 7 2 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
70 25 7 2 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
70 25 7 2 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
concentrated 70 25 5 Fair resistance Plexiglas V; Rohm & Haas
" 70 .25 2 Not recommended for Plexiglas V; Rohm & Haas; Specimen:
use Literature lists test temperature as
elevated
0]20 20 8 Resistant Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
0]20 20 8 " Low stress "
0]20 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]20 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
20]70 20 5 Limited resistance Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20]70 20 5 " Low stress "
20]70 20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20]70 20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
concd. 0 Not resistant Acrylite FF; CYRO Industries
Nitrobenzene 23 2 Not recommended for
use
65 2 "
Nitrogen Dioxide 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Nitrogen Monoxide 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
49
50
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Nitrogen Monoxide 20 8 Resistant XT; CYRO Industries; Specimen: 50%
(cont) Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Nutmeg 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Oleic Acid 100 23 7 9 No visible change 0.12 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 9 " 0.1 "
25 7 9 20.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 20.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 20.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 20.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 20.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 9 0 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 9 0 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 9 Excellent resistance Plexiglas V; Rohm & Haas
,49 8 Resistant Acrylite FF; CYRO Industries
.25 7 Good resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
Acrylic
elevated
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Oleum 23 2 Not recommended for
use
65 2 "
Olive Oil 100 23 7 9 No visible change NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 9 " "
20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
edible grade 25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 25 9 Excellent resistance Plexiglas V; Rohm & Haas
,49 8 Resistant Acrylite FF; CYRO Industries
edible grade .25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Onions 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
51
Relative Humidity, low stress
52
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Outdoor West Virginia 182 6 Excellent UV 72 Impact retained is Korad; Polymer Extruded Products;
Weathering resistance; many falling dart impact Specimen: 0.076 mm (0.003 in)
years of successful measured on coated pigmented protective film over 3.2 mm
applications surface ABS substrate
" 365 5 " 65 " "
Pennsylvania 730 7 Plexiglas V044; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas V045; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas V052; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas V811; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas V825; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas V920; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas VH; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas VM; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
" 730 7 Plexiglas VS; Rohm & Haas; Specimen:
According to ASTM D1925 for yellowness
index change
West Virginia 1095 4 Excellent UV 28 Impact retained is Korad; Polymer Extruded Products;
resistance; many falling dart impact Specimen: 0.076 mm (0.003 in)
years of successful measured on coated pigmented protective film over 3.2 mm
applications surface ABS substrate
Florida 1460 6 78 Acrysteel IGP; Aristech
" 1460 6 78 Acrysteel IMA; Aristech
Pennsylvania 1825 8 Light transmittance: Plexiglas V044; Rohm & Haas; Specimen:
parallel - 90% total - 2.54 mm (0.1 in) thick, according to
92%; haze - 3% ASTM D542, D1003
" 1825 8 " Plexiglas V045; Rohm & Haas; Specimen:
Acrylic
2.54 mm (0.1 in) thick, according to
ASTM D542, D1003
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Outdoor Pennsylvania 1825 8 Light transmittance: Plexiglas V052; Rohm & Haas; Specimen:
Weathering (cont) parallel - 90% total - 2.54 mm (0.1 in) thick, according to
92%; haze - 3% ASTM D542, D1003
" 1825 8 Light transmittance: Plexiglas V811; Rohm & Haas; Specimen:
parallel - 91% total - 2.54 mm (0.1 in) thick, according to
92%; haze - 2% ASTM D542, D1003
" 1825 8 " Plexiglas V825; Rohm & Haas; Specimen:
2.54 mm (0.1 in) thick, according to
ASTM D542, D1003
" 1825 8 Light transmittance: Plexiglas V920; Rohm & Haas; Specimen:
parallel - 90% total - 2.54 mm (0.1 in) thick, according to
92%; haze - 3% ASTM D542, D1003
" 1825 8 " Plexiglas VH; Rohm & Haas; Specimen:
2.54 mm (0.1 in) thick, according to
ASTM D542, D1003
" 1825 8 " Plexiglas VM; Rohm & Haas; Specimen:
2.54 mm (0.1 in) thick, according to
ASTM D542, D1003
" 1825 8 Light transmittance: Plexiglas VS; Rohm & Haas; Specimen:
parallel - 88% total - 2.54 mm (0.1 in) thick, according to
92%; haze - 5% ASTM D542, D1003
Oxalic Acid 23 8 Excellent resistance -
no recognizable attack
65 8 "
Paint Thinners 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Paints acrylic 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
cellulose 20 2 Susceptible to attack " "
oil base 20 8 Resistant " "
acrylic 20 6 Limited resistance Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
cellulosic 20 3 Susceptible to attack "
oil base 20 8 Resistant "
acrylic 20 6 Limited resistance XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
cellulosic 20 3 Susceptible to attack "
53
oil base 20 8 Resistant "
54
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Paraffin 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Peanut Butter 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Pepper 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Perchloric Acid 23 8 Excellent resistance -
no recognizable attack
65 8 "
Petroleum Ether 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
Petroleum Jelly 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Phenol 5 23 7 9 No visible change 0.19 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
5 23 28 9 " 0.5 "
5 25 7 2 Attacked Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 2 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 2 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
5 25 7 2 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 2 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 2 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 2 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Phenol (cont) 5 25 7 2 Attacked Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 2 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
5 25 7 2 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
5 25 2 Not recommended for Plexiglas V; Rohm & Haas
use
Aqueous solution 5 25 2 " "
5 .25 2 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Aqueous solution 5 .25 2 " "
5 0 Not resistant Acrylite FF; CYRO Industries
soln. 5 0 " "
20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
65 2 Not recommended for
use
Phosphoric Acid 25 23 8 Excellent resistance -
no recognizable attack
25 65 6 Good - minor attack
85 23 6 "
85 65 5 Fair - limited use
0]10 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
0]10 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]10 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Photographic Fixing photographic baths 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Baths Molded, tested @ 50% Relative Humidity
" 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 20 8 " XT; CYRO Industries; Specimen: 50%
55
Relative Humidity, low stress
56
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Phthalic Acid 23 6 Good - minor attack
65 5 Fair - limited use
Potassium 23 6 Good - minor attack
Bicarbonate
65 5 Fair - limited use
Potassium 23 6 Good - minor attack
Carbonate
65 5 Fair - limited use
Potassium 23 6 Good - minor attack
Dichromate
65 6 "
Potassium 20 8 Resistant Acrylite; CYRO Industries; Specimen:
Hydroxide Molded, tested @ 50% Relative Humidity
20 8 " Low stress "
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 5 Fair - limited use
65 2 Not recommended for
use
Potassium Nitrate 23 8 Excellent resistance -
no recognizable attack
65 8 "
Potassium 23 6 Good - minor attack
Permanganate
65 6 "
Potassium Sulfate 23 8 Excellent resistance -
no recognizable attack
65 8 "
Propylene 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
Pyridine 20 2 Susceptible to attack " "
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Salad Dressings 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Acrylic
Containers, bottles
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Soaps white flakes; solution 1 25 7 9 0.5 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas V044; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas V045; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 1 25 7 9 0.5 Plexiglas V045FH; Specimen: In
accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas V052; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas V811; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas V825; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas V920; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas VM; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 1 25 7 9 0.5 Plexiglas VMHF; Specimen: In accordance
with ASTM D543
" 1 25 7 9 0.5 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 1 25 7 9 0.5 Plexiglas VS; Specimen: In accordance
with ASTM D543
57
58
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Soaps (cont) white flakes; solution 1 25 7 Good resistance Plexiglas V; Rohm & Haas
" 1 25 7 " Plexiglas V
" 1 .25 5 Fair resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
" 1 .25 5 " Plexiglas V; Specimen: Literature lists test
temperature as elevated
soap suds 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 8 " " Acrylite; Specimen: Molded, tested @
50% Relative Humidity
" 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 20 8 " Cyrolite G20; Specimen: 50% Relative
Humidity
" 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
" 20 8 " XT; Specimen: 50% Relative Humidity,
low stress
solutions 23 7 9 No visible change 0.13 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
" 23 7 9 " 0.13 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
" 23 28 9 " 0.13 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
" 23 28 9 " 0.13 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
soln., mild dish soap ,49 8 Resistant Acrylite FF; CYRO Industries
" ,49 8 " Acrylite FF;
Sodium 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Bicarbonate Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 6 Good - minor attack
Acrylic
65 5 Fair - limited use
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Carbonate 2 23 7 9 No visible change 0.09 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
2 23 7 9 " 0.09 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
2 23 28 9 " 0.06 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
2 23 28 9 " 0.06 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
2 25 7 9 0.5 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
2 25 7 9 0.5 Plexiglas V044; Specimen: In accordance
with ASTM D543
2 25 7 9 0.5 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
2 25 7 9 0.5 Plexiglas V045; Specimen: In accordance
with ASTM D543
2 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
2 25 7 9 0.5 Plexiglas V045FH; Specimen: In
accordance with ASTM D543
2 25 7 9 0.5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
2 25 7 9 0.5 Plexiglas V052; Specimen: In accordance
with ASTM D543
2 25 7 9 0.5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
2 25 7 9 0.5 Plexiglas V811; Specimen: In accordance
with ASTM D543
2 25 7 9 0.5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
2 25 7 9 0.5 Plexiglas V825; Specimen: In accordance
with ASTM D543
2 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
2 25 7 9 0.5 Plexiglas V920; Specimen: In accordance
with ASTM D543
59
60
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Carbonate 2 25 7 8 0.6 Plexiglas VM; Rohm & Haas; Specimen:
(cont) In accordance with ASTM D543
2 25 7 8 0.6 Plexiglas VM; Specimen: In accordance
with ASTM D543
2 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
2 25 7 8 0.6 Plexiglas VMHF; Specimen: In accordance
with ASTM D543
2 25 7 8 0.6 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
2 25 7 8 0.6 Plexiglas VS; Specimen: In accordance
with ASTM D543
2 25 7 Good resistance Plexiglas V; Rohm & Haas
2 25 7 " Plexiglas V
2 ,49 8 Resistant Acrylite FF; CYRO Industries
2 ,49 8 " Acrylite FF
2 .25 5 Fair resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
2 .25 5 " Plexiglas V; Specimen: Literature lists test
temperature as elevated
20 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
20 20 8 " XT; Specimen: Containers, bottles
20 23 7 9 No visible change 0.08 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
20 23 7 9 " 0.08 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
20 23 28 9 " 0.07 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
20 23 28 9 " 0.07 NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
20 25 7 9 0.3 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
20 25 7 9 0.3 Plexiglas V044; Specimen: In accordance
Acrylic
with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Carbonate 20 25 7 9 0.3 Plexiglas V045; Rohm & Haas; Specimen:
(cont) In accordance with ASTM D543
20 25 7 9 0.3 Plexiglas V045; Specimen: In accordance
with ASTM D543
20 25 7 9 0.3 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
20 25 7 9 0.3 Plexiglas V045FH; Specimen: In
accordance with ASTM D543
20 25 7 9 0.3 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
20 25 7 9 0.3 Plexiglas V052; Specimen: In accordance
with ASTM D543
20 25 7 9 0.3 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
20 25 7 9 0.3 Plexiglas V811; Specimen: In accordance
with ASTM D543
20 25 7 9 0.3 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
20 25 7 9 0.3 Plexiglas V825; Specimen: In accordance
with ASTM D543
20 25 7 9 0.3 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
20 25 7 9 0.3 Plexiglas V920; Specimen: In accordance
with ASTM D543
20 25 7 9 0.4 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
20 25 7 9 0.4 Plexiglas VM; Specimen: In accordance
with ASTM D543
20 25 7 9 0.4 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
20 25 7 9 0.4 Plexiglas VMHF; Specimen: In accordance
with ASTM D543
20 25 7 9 0.4 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
20 25 7 9 0.4 Plexiglas VS; Specimen: In accordance
with ASTM D543
20 25 7 Good resistance Plexiglas V; Rohm & Haas
20 25 7 " Plexiglas V
20 ,49 8 Resistant Acrylite FF; CYRO Industries
61
62
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Carbonate 20 ,49 8 Resistant Acrylite FF
(cont)
20 .25 5 Fair resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
20 .25 5 " Plexiglas V; Specimen: Literature lists test
temperature as elevated
23 6 Good - minor attack
65 5 Fair - limited use
Sodium Chloride 10 23 7 9 No visible change 0.1 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
10 23 28 9 " 0.07 "
10 25 7 9 0.5 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.5 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.5 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
10 25 9 Excellent resistance Plexiglas V; Rohm & Haas
10 ,49 8 Resistant Acrylite FF; CYRO Industries
10 .25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Chloride 23 8 Excellent resistance -
(cont) no recognizable attack
65 8 "
Sodium Cyanide 23 6 Good - minor attack
65 6 "
Sodium 23 6 "
Ferricyanide
65 6 "
Sodium Hydroxide 1 23 7 9 No visible change 0.09 NAS 10; Novacor Chemicals
1 23 7 9 " 0.09 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
1 23 28 9 " 0.09 NAS 10; Novacor Chemicals
1 23 28 9 " 0.09 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
1 25 7 9 0.5 Plexiglas V044; Rohm & Haas
1 25 7 9 0.5 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
1 25 7 9 0.5 Plexiglas V045; Rohm & Haas
1 25 7 9 0.5 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
1 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas
1 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
1 25 7 9 0.5 Plexiglas V052; Rohm & Haas
1 25 7 9 0.5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
1 25 7 9 0.5 Plexiglas V811; Rohm & Haas
1 25 7 9 0.5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
1 25 7 9 0.5 Plexiglas V825; Rohm & Haas
1 25 7 9 0.5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
1 25 7 9 0.5 Plexiglas V920; Rohm & Haas
1 25 7 9 0.5 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
1 25 7 9 0.5 Plexiglas VM; Rohm & Haas
63
64
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Hydroxide 1 25 7 9 0.5 Plexiglas VM; Rohm & Haas; Specimen:
(cont) In accordance with ASTM D543
1 25 7 9 0.5 Plexiglas VMHF; Rohm & Haas
1 25 7 9 0.5 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
1 25 7 8 0.6 Plexiglas VS; Rohm & Haas
1 25 7 8 0.6 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
1 25 9 Excellent resistance Plexiglas V; Rohm & Haas
1 ,49 8 Resistant Acrylite FF; CYRO Industries
1 .25 9 Excellent resistance Plexiglas V; Rohm & Haas
1 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
5 20 8 Suitable for packaging XT; CYRO Industries
5 20 8 " XT; CYRO Industries; Specimen:
Containers, bottles
10 23 7 9 No visible change 0.07 NAS 10; Novacor Chemicals
10 23 7 9 " 0.07 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
10 23 28 9 " 0.07 NAS 10; Novacor Chemicals
10 23 28 9 " 0.07 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
10 25 7 9 0.4 Plexiglas V044; Rohm & Haas
10 25 7 9 0.4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045; Rohm & Haas
10 25 7 9 0.4 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.4 Plexiglas V045FH; Rohm & Haas
10 25 7 9 0.4 Plexiglas V052; Rohm & Haas
10 25 7 9 0.4 Plexiglas V052; Rohm & Haas; Specimen:
Acrylic
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V811; Rohm & Haas
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Hydroxide 10 25 7 9 0.4 Plexiglas V811; Rohm & Haas; Specimen:
(cont) In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V825; Rohm & Haas
10 25 7 9 0.4 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas V920; Rohm & Haas
10 25 7 9 0.4 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas VM; Rohm & Haas
10 25 7 9 0.4 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
10 25 7 9 0.4 Plexiglas VMHF; Rohm & Haas
10 25 7 9 0.4 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
10 25 7 9 0.5 Plexiglas VS; Rohm & Haas
10 25 7 9 0.5 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
10 25 9 Excellent resistance Plexiglas V; Rohm & Haas
10 ,49 8 Resistant Acrylite FF; CYRO Industries
10 .25 9 Excellent resistance Plexiglas V; Rohm & Haas
10 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
10 8 Acceptable as a Acrysteel IGP; Aristech
cleaner
60 23 7 9 No visible change 20.01 NAS 10; Novacor Chemicals
60 23 7 9 " 20.01 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
60 23 28 9 " 20.01 NAS 10; Novacor Chemicals
60 23 28 9 " 20.01 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
60 25 7 9 20.4 Plexiglas V044; Rohm & Haas
60 25 7 9 20.4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
60 25 7 9 20.4 Plexiglas V045; Rohm & Haas
60 25 7 9 20.4 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
65
66
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium Hydroxide 60 25 7 9 20.4 Plexiglas V045FH; Rohm & Haas
(cont)
60 25 7 9 20.4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
60 25 7 9 20.4 Plexiglas V052; Rohm & Haas
60 25 7 9 20.4 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
60 25 7 9 20.4 Plexiglas V811; Rohm & Haas
60 25 7 9 20.4 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
60 25 7 9 20.4 Plexiglas V825; Rohm & Haas
60 25 7 9 20.4 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
60 25 7 9 20.4 Plexiglas V920; Rohm & Haas
60 25 7 9 20.4 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
60 25 7 9 20.2 Plexiglas VM; Rohm & Haas
60 25 7 9 20.2 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
60 25 7 9 20.2 Plexiglas VMHF; Rohm & Haas
60 25 7 9 20.2 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
60 25 7 9 20.2 Plexiglas VS; Rohm & Haas
60 25 7 9 20.2 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
60 25 9 Excellent resistance Plexiglas V; Rohm & Haas
60 ,49 8 Resistant Acrylite FF; CYRO Industries
60 .25 9 Excellent resistance Plexiglas V; Rohm & Haas
60 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Sodium 5 23 7 9 No visible change 0.08 NAS 10; Novacor Chemicals; Specimen:
Hypochlorite 50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
5 23 28 9 " 0.07 "
5 25 7 9 0.4 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sodium 5 25 7 9 0.4 Plexiglas V045; Rohm & Haas; Specimen:
Hypochlorite (cont) In accordance with ASTM D543
5 25 7 9 0.4 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
5 25 7 9 0.4 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 9 0.4 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 9 0.4 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 9 0.4 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 9 0.4 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
5 25 7 9 0.4 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
5 25 7 9 0.4 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
5 25 9 Excellent resistance Plexiglas V; Rohm & Haas
5 ,49 8 Resistant Acrylite FF; CYRO Industries
5 .25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
6 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Sodium Nitrate 23 8 Excellent resistance -
no recognizable attack
65 8 "
Sodium Sulfate 23 8 "
65 8 "
Soybean Oil 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
Spraylat 200 thinner 5 Not recommended as Acrysteel IGP; Aristech
a cleaner-remover
Stannic Chloride 23 8 Excellent resistance -
no recognizable attack
65 8 "
Sulfur Dioxide dry 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
67
68
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sulfur Dioxide liquid 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
(cont) Molded, tested @ 50% Relative Humidity
dry 20 8 Resistant Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
liquid 20 3 Susceptible to attack "
dry 20 8 Resistant XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
liquid 20 3 Susceptible to attack "
dry 23 8 Excellent resistance -
no recognizable attack
moist 23 8 "
dry 65 8 "
moist 65 8 "
Sulfuric Acid 3 23 7 9 No visible change 0.1 NAS 10; Novacor Chemicals
3 23 7 9 " 0.1 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
3 23 28 9 " 0.07 NAS 10; Novacor Chemicals
3 23 28 9 " 0.07 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
3 25 7 9 0.5 Plexiglas V044; Rohm & Haas
3 25 7 9 0.5 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 9 0.5 Plexiglas V045; Rohm & Haas
3 25 7 9 0.5 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas
3 25 7 9 0.5 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
3 25 7 9 0.5 Plexiglas V052; Rohm & Haas
3 25 7 9 0.5 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 9 0.5 Plexiglas V811; Rohm & Haas
3 25 7 9 0.5 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 9 0.5 Plexiglas V825; Rohm & Haas
Acrylic
3 25 7 9 0.5 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sulfuric Acid (cont) 3 25 7 8 0.6 Plexiglas V920; Rohm & Haas
3 25 7 8 0.6 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas VM; Rohm & Haas
3 25 7 8 0.6 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
3 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas
3 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
3 25 7 8 0.6 Plexiglas VS; Rohm & Haas
3 25 7 8 0.6 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
3 25 9 Excellent resistance Plexiglas V; Rohm & Haas
3 ,49 8 Resistant Acrylite FF; CYRO Industries
3 .25 9 Excellent resistance Plexiglas V; Rohm & Haas
3 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
10 23 8 Excellent resistance -
no recognizable attack
10 65 6 Good - minor attack
20 20 8 Suitable for packaging XT; CYRO Industries
20 20 8 " XT; CYRO Industries; Specimen:
Containers, bottles
30 23 7 9 No visible change 0.05 NAS 10; Novacor Chemicals
30 23 7 9 " 0.05 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
30 23 28 9 " 0.03 NAS 10; Novacor Chemicals
30 23 28 9 " 0.03 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
30 25 7 9 0.3 Plexiglas V044; Rohm & Haas
30 25 7 9 0.3 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
30 25 7 9 0.3 Plexiglas V045; Rohm & Haas
30 25 7 9 0.3 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
69
30 25 7 9 0.3 Plexiglas V045FH; Rohm & Haas
70
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sulfuric Acid (cont) 30 25 7 9 0.3 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
30 25 7 9 0.3 Plexiglas V052; Rohm & Haas
30 25 7 9 0.3 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
30 25 7 9 0.3 Plexiglas V811; Rohm & Haas
30 25 7 9 0.3 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
30 25 7 9 0.3 Plexiglas V825; Rohm & Haas
30 25 7 9 0.3 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
30 25 7 9 0.3 Plexiglas V920; Rohm & Haas
30 25 7 9 0.3 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
30 25 7 9 0.3 Plexiglas VM; Rohm & Haas
30 25 7 9 0.3 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
30 25 7 9 0.3 Plexiglas VMHF; Rohm & Haas
30 25 7 9 0.3 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
30 25 7 9 0.3 Plexiglas VS; Rohm & Haas
30 25 7 9 0.3 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
30 25 9 Excellent resistance Plexiglas V; Rohm & Haas
30 ,49 8 Resistant Acrylite FF; CYRO Industries
30 .25 9 Excellent resistance Plexiglas V; Rohm & Haas
30 .25 9 " Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
78 23 2 Not recommended for
use
78 65 2 "
93 23 2 "
93 65 2 "
98 23 7 9 No visible change 20.19 NAS 10; Novacor Chemicals
98 23 7 9 " 20.19 NAS 10; Novacor Chemicals; Specimen:
Acrylic
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sulfuric Acid (cont) 98 23 28 9 No visible change 20.26 NAS 10; Novacor Chemicals
98 23 28 9 " 20.26 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
concentrated 98 25 7 0 Dissolved Plexiglas V044; Rohm & Haas
" 98 25 7 0 " Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 98 25 7 0 " Plexiglas V045; Rohm & Haas
" 98 25 7 0 " Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 98 25 7 0 " Plexiglas V045FH; Rohm & Haas
" 98 25 7 0 " Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 98 25 7 0 " Plexiglas V052; Rohm & Haas
" 98 25 7 0 " Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 98 25 7 0 " Plexiglas V811; Rohm & Haas
" 98 25 7 0 " Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 98 25 7 0 " Plexiglas V825; Rohm & Haas
" 98 25 7 0 " Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 98 25 7 0 " Plexiglas V920; Rohm & Haas
" 98 25 7 0 " Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 98 25 7 0 " Plexiglas VM; Rohm & Haas
" 98 25 7 0 " Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 98 25 7 0 " Plexiglas VMHF; Rohm & Haas
" 98 25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 98 25 7 0 " Plexiglas VS; Rohm & Haas
" 98 25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
98 25 2 Not recommended for Plexiglas V; Rohm & Haas
use
98 .25 2 " "
71
72
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Sulfuric Acid (cont) 98 .25 2 Not recommended for Plexiglas V; Rohm & Haas; Specimen:
use Literature lists test temperature as
elevated
0]30 20 8 Resistant Low stress Acrylite; CYRO Industries
0]30 20 8 " " Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
0]30 20 8 " Cyrolite G20; CYRO Industries
0]30 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]30 20 8 " XT; CYRO Industries
0]30 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
concd. 0 Not resistant Acrylite FF; CYRO Industries
Sulfurous Acid 0]5 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
0]5 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
0]5 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
concentrated 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Tannic Acid 23 8 Excellent resistance -
no recognizable attack
65 8 "
Tartaric Acid 23 8 "
65 8 "
Tea 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Tetrachloroethene 20 5 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
Acrylic
20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Tetrachloroethene 20 6 Limited resistance XT; CYRO Industries; Specimen: 50%
(cont) Relative Humidity, low stress
73
74
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Toluene (cont) 25 7 0 Dissolved Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
25 7 0 " Plexiglas VMHF; Rohm & Haas
25 7 0 " Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
25 7 0 " Plexiglas VS; Rohm & Haas
25 7 0 " Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
25 2 Not recommended for Plexiglas V; Rohm & Haas
use
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
2 Do not use as a Acrysteel IGP; Aristech
cleaner-remover
Transformer Oils 100 23 7 9 No visible change 0.03 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 9 " 0.03 "
ASTM D1040 25 7 9 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 9 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 9 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
Acrylic
" 25 7 9 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Transformer Oils ASTM D1040 25 7 Good resistance Plexiglas V; Rohm & Haas
(cont)
,49 8 Resistant Acrylite FF; CYRO Industries
ASTM D1040 .25 7 Good resistance Plexiglas V; Rohm & Haas; Specimen:
Literature lists test temperature as
elevated
Trichloroethene 23 2 Not recommended for
use
65 2 "
0 Not resistant Acrylite FF; CYRO Industries
Tricresyl Phosphate 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Triethylamine 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Trisodium 23 6 Good - minor attack
Phosphate
65 5 Fair - limited use
Turpentine 100 23 7 2 Partly dissolved NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 7 2 " NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
100 23 28 2 " NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
100 23 28 2 " NAS 10; Specimen: 50.833.2 mm
(230.125 in), ASTM D543 discs in closed
glass jars
20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " " Acrylite; Specimen: Molded, tested @
50% Relative Humidity
75
76
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Turpentine (cont) 20 8 Suitable for packaging XT; CYRO Industries; Specimen:
Containers, bottles
20 8 " XT; Specimen: Containers, bottles
distilled spirit; ASTM D13 25 7 6 Crazing 0.1 Plexiglas V044; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas V044; Specimen: In accordance
with ASTM D543
" 25 7 6 " 0.1 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas V045; Specimen: In accordance
with ASTM D543
" 25 7 6 " 0.1 Plexiglas V045FH; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 6 " 0.1 Plexiglas V045FH; Specimen: In
accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas V052; Specimen: In accordance
with ASTM D543
" 25 7 6 " 0.1 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas V811; Specimen: In accordance
with ASTM D543
" 25 7 6 " 0.1 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas V825; Specimen: In accordance
with ASTM D543
" 25 7 6 " 0.1 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas V920; Specimen: In accordance
with ASTM D543
" 25 7 6 " 0.1 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas VM; Specimen: In accordance
with ASTM D543
" 25 7 6 " 0.1 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 6 " 0.1 Plexiglas VMHF; Specimen: In accordance
Acrylic
with ASTM D543
Acrylic
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Turpentine (cont) distilled spirit; ASTM D13 25 7 6 Crazing 0.1 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 25 7 6 " 0.1 Plexiglas VS; Specimen: In accordance
with ASTM D543
" 25 2 Not recommended for Plexiglas V; Rohm & Haas
use
" 25 2 " Plexiglas V
,49 8 Resistant Acrylite FF; CYRO Industries
,49 8 " Acrylite FF
distilled spirit; ASTM D13 .25 2 Not recommended for Plexiglas V; Rohm & Haas; Specimen:
use Literature lists test temperature as
elevated
" .25 2 " Plexiglas V; Specimen: Literature lists test
temperature as elevated
Vegetable Oils 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Vinegar 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Water mineral water 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
23 7 9 No visible change 0.11 NAS 10; Novacor Chemicals; Specimen:
50.833.2 mm (230.125 in), ASTM D543
discs in closed glass jars
23 28 9 " 0.11 "
distilled, all 25 7 8 0.6 Plexiglas V044; Rohm & Haas; Specimen:
concentrations In accordance with ASTM D543
" 25 7 8 0.6 Plexiglas V045; Rohm & Haas; Specimen:
In accordance with ASTM D543
77
78
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Water (cont) distilled, all 25 7 8 0.6 Plexiglas V045FH; Rohm & Haas;
concentrations Specimen: In accordance with ASTM
D543
" 25 7 8 0.6 Plexiglas V052; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 8 0.6 Plexiglas V811; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 8 0.6 Plexiglas V825; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 8 0.6 Plexiglas V920; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 8 0.6 Plexiglas VM; Rohm & Haas; Specimen:
In accordance with ASTM D543
" 25 7 8 0.6 Plexiglas VMHF; Rohm & Haas;
Specimen: In accordance with ASTM
D543
" 25 7 8 0.7 Plexiglas VS; Rohm & Haas; Specimen: In
accordance with ASTM D543
" 25 9 Excellent resistance Plexiglas V; Rohm & Haas
,49 8 Resistant Acrylite FF; CYRO Industries
distilled, all .25 9 Excellent resistance Plexiglas V; Rohm & Haas; Specimen:
concentrations Literature lists test temperature as
elevated
Waxes wax polish 20 5 Limited resistance Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
" 20 6 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
" 20 6 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Whitewash 20 8 Resistant Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
Wines 20 8 " Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 8 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 8 " XT; CYRO Industries; Specimen: 50%
Acrylic
Relative Humidity, low stress
Methyl Methacrylate Terpolymer
%
% Retained
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) # Tensile Impact
Weight
strength strength
Xylene 20 2 Susceptible to attack Low stress Acrylite; CYRO Industries; Specimen:
Molded, tested @ 50% Relative Humidity
20 3 " Cyrolite G20; CYRO Industries; Specimen:
50% Relative Humidity
20 3 " XT; CYRO Industries; Specimen: 50%
Relative Humidity, low stress
0 Not resistant Acrylite FF; CYRO Industries
2 Do not use as a Acrysteel IGP; Aristech
cleaner-remover
xylol 2 " "
Zinc Chloride 23 8 Excellent resistance -
no recognizable attack
65 8 "
Zinc Sulfate 23 8 "
65 8 "
% Retained
Exp. medium PDL
Exposure medium Resistance note Tensile Impact Material note
note # Elong.
strength strength
Gamma Radiation 7.5 megarads, 6 Color is time dependent 75.7 98.6 78.9 Cyrolite G20; Specimen: 50.833.2 mm (230.125 in) discs for yellowness
Cobalt 60 index change
2.5 megarads, 7 Turns light green; color is time dependent 93 98.6 89.5 "
Cobalt 60
5 megarads, 7 Color is time dependent 100.9 100 84.2 "
Cobalt 60
7.5 megarads, 5 " 150.9 101.5 72.2 Cyrolite G20 HIFLO; Specimen: 50.833.2 mm (230.125 in) discs for
Cobalt 60 yellowness index change
5 megarads, 7 " 72.7 100 88.9 "
Cobalt 60
2.5 megarads, 8 Turns light green; color is time dependent 93.6 100 94.4 "
Cobalt 60
" 6 Turns dark olive green; color is time dependent 163 101.3 92.9 XT 250; Specimen: 50.833.2 mm (230.125 in) discs for yellowness
index change
5 megarads, 6 Color is time dependent 153 101.3 85.7 "
Cobalt 60
79
80
% Retained
Exp. medium PDL
Exposure medium Resistance note Tensile Impact Material note
note # Elong.
strength strength
Gamma Radiation 7.5 megarads, 7 Color is time dependent 115 101.3 78.6 XT 250; Specimen: 50.833.2 mm (230.125 in) discs for yellowness
(cont) Cobalt 60 index change
2.5 megarads, 6 Turns dark olive green; color is time dependent 138 102.7 90.5 XT 375; Specimen: 50.833.2 mm (230.125 in) discs for yellowness
Cobalt 60 index change
5 megarads, 6 Color is time dependent 161 102.7 81 "
Cobalt 60
7.5 megarads, 6 " 147 102.7 76.2 "
Cobalt 60
5 megarads, 5 " 173.7 101.5 84.2 XT X800RG; Specimen: 50.833.2 mm (230.125 in) discs for yellowness
Cobalt 60 index change
7.5 megarads, 6 " 122.5 101.5 79 "
Cobalt 60
2.5 megarads, 7 Turns dark olive green; color is time dependent 81.2 97 94.7 "
Cobalt 60
Outdoor 4 Not recommended; impact modifier will be Cyrolite; Specimen: Transparent
Weathering affected by UV light
5 Not recommended for long term outdoor use Cyrolite; Specimen: Opaque
4 Not recommended; impact modifier will be XT; Specimen: Transparent
affected by UV light
5 Not recommended for long term outdoor use XT; Specimen: Opaque
% Retained
Exposure medium Exp. medium note Conc. (%) Temp. (C) Time (days) PDL # Material note
Elong. Tensile strength Impact strength
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
81
82
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Acetic Acid (cont) 5 23 7 8 0.7 Chemical resistance Acrylite H-15; CYRO Industries
per ASTM D543
5 23 7 8 0.7 " Acrylite M-30; CYRO Industries
5 25 7 9 0.4 Aristech GPA; Aristech
5 25 7 9 0.5 Aristech I-300; Aristech
10 23 8 Satisfactory resistance Diakon; ICI
10 23 8 " Diakon; ICI; Specimen: Small,
unstressed samples
,25 5 Limited resistance ACRYLITE PLUS; CYRO Industries
.25 0 Not resistant "
23 2 Unsatisfactory resistance Diakon; ICI
23 2 " Diakon; ICI; Specimen: Small,
unstressed samples
glacial 23 2 " Diakon; ICI
" 23 2 " Diakon; ICI; Specimen: Small,
unstressed samples
Acetic Anhydride 23 5 Some attack but only "
slight reduction in
mechanical properties
Acetone 23 2 Unsatisfactory resistance "
25 0.6 6 Cleaned by application Per ASTM D-1300; Aristech I-300; Aristech
of a mild abrasive 2]3 drops applied
and covered with
watch glass
25 7 0 Dissolved Aristech GPA; Aristech
25 7 4 Rubbery; swollen Aristech I-300; Aristech
0 Not resistant ACRYLITE PLUS; CYRO Industries
8 No stain per ANSI Aristech I-300; Aristech;
83
84
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Ammonium Hydroxide 10 23 7 8 0.7 Chemical resistance Acrylite M-30; CYRO Industries
(cont) per ASTM D543
10 25 7 9 0.4 Aristech GPA; Aristech
10 25 7 9 0.5 Aristech I-300; Aristech
Ammonium Sulfate 9 Resistant ACRYLITE PLUS; CYRO Industries
Amyl Acetate 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
23 2 " Diakon; Specimen: Small,
unstressed samples
25 0.6 8 Sample unaffected Per ASTM D-1300; Aristech I-300; Aristech
2]3 drops applied
and covered with
watch glass
25 0.6 8 " " Aristech I-300;
0 Not resistant ACRYLITE PLUS; CYRO Industries
8 No stain per ANSI Aristech I-300; Aristech;
Z124.1-1987 Specimen: Covered samples
8 " Aristech I-300; Aristech;
Specimen: Uncovered specimen
8 Unaffected per ANSI Aristech I-300; Aristech
Z124.1-1971
8 No stain per ANSI Aristech I-300; Specimen: Covered
Z124.1-1987 samples
8 " Aristech I-300; Specimen:
Uncovered specimen
8 Unaffected per ANSI Aristech I-300;
Z124.1-1971
8 No stain per ANSI Aristech S-300; Aristech;
Z124.1-1987 Specimen: Covered samples
85
86
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Bromine 5 Limited resistance ACRYLITE PLUS; CYRO Industries
0 Not resistant "
1-Bromonaphthalene 9 Resistant "
Butyl Acetate 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Butyl Acetyl 23 5 Some attack but only "
Ricinoleate slight reduction in
mechanical properties
Butyl Alcohol n-butyl alcohol 23 2 Unsatisfactory resistance "
0 Not resistant ACRYLITE PLUS; CYRO Industries
Butyl Chloride n-butyl chloride 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Butyl Lactate 0 Not resistant ACRYLITE PLUS; CYRO Industries
Butyl Stearate 23 5 Some attack but only Diakon; ICI; Specimen: Small,
slight reduction in unstressed samples
mechanical properties
Butyraldehyde 23 2 Unsatisfactory resistance "
Butyric Acid ,5 5 Limited resistance ACRYLITE PLUS; CYRO Industries
n-butyric acid; 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
concentrated unstressed samples
Calcium Chloride saturated solution 23 8 Satisfactory resistance "
9 Resistant ACRYLITE PLUS; CYRO Industries
Calcium Hypochlorite 9 " "
Carbon Bisulfide 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
0 Not resistant ACRYLITE PLUS; CYRO Industries
Carbon Dioxide 9 Resistant "
87
88
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Cloves 0 Not resistant ACRYLITE PLUS; CYRO Industries
Coffee 9 Resistant "
8 Unaffected per ANSI Aristech I-300; Aristech
Z124.1-1971
Cooking Oils 5 Limited resistance ACRYLITE PLUS; CYRO Industries
Cresol 0 Not resistant "
Cyclohexane 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
5 Limited resistance ACRYLITE PLUS; CYRO Industries
Cyclohexanol 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
23 2 " Diakon; Specimen: Small,
unstressed samples
Cyclohexanone 23 2 " Diakon; ICI; Specimen: Small,
unstressed samples
Cyclohexene 23 2 " "
Decahydronaphthalene decahydronaphthalene 23 2 " "
Detergents solutions 23 7 8 0.7 Chemical resistance Acrylite H-12; CYRO Industries
per ASTM D543
" 23 7 8 0.7 " Acrylite H-12;
" 23 7 8 0.7 " Acrylite H-15; CYRO Industries
" 23 7 8 0.7 " Acrylite H-15;
" 23 7 8 0.7 " Acrylite M-30; CYRO Industries
" 23 7 8 0.7 " Acrylite M-30;
soapless 8 Unaffected per ANSI Aristech I-300; Aristech
Z124.1-1971
" 8 " Aristech I-300;
89
90
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Ethyl Acetate 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
25 0.6 6 Cleaned by application Per ASTM D-1300; Aristech I-300; Aristech
of a mild abrasive 2]3 drops applied
and covered with
watch glass
25 7 0 Dissolved Aristech GPA; Aristech
25 7 4 Rubbery; swollen Aristech I-300; Aristech
0 Not resistant ACRYLITE PLUS; CYRO Industries
4 Stained and required Aristech I-300; Aristech;
phenol solution to Specimen: Covered samples
remove per ANSI
Z124.1-1987
4 " Aristech I-300; Aristech;
Specimen: Uncovered specimen
6 Superficial stain only per Aristech I-300; Aristech
ANSI Z124.1-1971
5 Stained and required Aristech S-300; Aristech;
phenol solution to Specimen: Covered samples
remove per ANSI
Z124.1-1987
5 " Aristech S-300; Aristech;
Specimen: Uncovered specimen
Ethyl Alcohol 10 23 6 Short term contact Diakon; ICI
satisfactory; not
recommended for
prolonged contact
10 23 6 " Diakon; ICI; Specimen: Small,
unstressed samples
50 23 7 4 2.5 Chemical resistance Acrylite H-12; CYRO Industries
per ASTM D543
91
92
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Formic Acid 10 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
90 23 2 Unsatisfactory resistance "
,20 9 Resistant ACRYLITE PLUS; CYRO Industries
.40 0 Not resistant "
20]40 5 Limited resistance "
Fruit Juices 9 Resistant "
Fuels motor fuel with 0 Not resistant "
benzene
motor fuel without 5 Limited resistance "
benzene
5 Fair resistance RTP 1800; RTP Company
Gamma Radiation 2.5 megarads, Cobalt 60 7 Turns yellow; color is 98.6 97.9 Acrylite H-15; CYRO Industries;
time dependent Specimen: 50.833.2 mm
(230.125 in) discs for yellowness
index change
5 megarads, Cobalt 60 7 Color is time dependent 101.4 86.5 "
7.5 megarads, Cobalt 60 4 " 84.1 64.6 "
7 Good resistance RTP 1800; RTP Company
Gasoline or naphtha 25 0.6 8 Sample unaffected Aristech I-300; Aristech
" 25 0.6 8 " Per ASTM D-1300; "
2]3 drops applied
and covered with
watch glass
heptane 25 7 9 0 Aristech GPA; Aristech
" 25 7 9 0 Aristech I-300; Aristech
8 Unaffected per ANSI "
Z124.1-1971
93
94
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Inks washable 25 0.6 8 Sample unaffected Per ASTM D-1300; Aristech I-300; Aristech
2]3 drops applied
and covered with
watch glass
" 8 Unaffected per ANSI "
Z124.1-1971
Insect Spray fly spray 8 " "
Iodine solution, 1% in alcohol 1 25 0.6 6 Cleaned by application Per ASTM D-1300; "
of a mild abrasive 2]3 drops applied
and covered with
watch glass
tincture 5 0 Not resistant ACRYLITE PLUS; CYRO Industries
9 Resistant "
solution 6 Superficial stain only per Aristech I-300; Aristech
ANSI Z124.1-1971
Iranoline 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Iron Perchloride 23 5 Some attack but only "
slight reduction in
mechanical properties
Isopropyl Alcohol 10 23 5 " "
50 23 5 " "
isopropanol 99 25 7 9 0.1 Aristech GPA; Aristech
" 99 25 7 9 20.2 Aristech I-300; Aristech
23 5 Some attack but only Diakon; ICI; Specimen: Small,
slight reduction in unstressed samples
mechanical properties
5 Limited resistance ACRYLITE PLUS; CYRO Industries
isopropanol 8 Unaffected per ANSI Aristech I-300; Aristech
95
96
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Methyl Alcohol (cont) .30 0 Not resistant ACRYLITE PLUS; CYRO Industries
23 Diakon; ICI; Specimen: Small,
unstressed samples
23 2 Unsatisfactory resistance "
25 0.6 Per ASTM D-1300; Aristech I-300; Aristech
2]3 drops applied
and covered with
watch glass
25 0.6 8 Sample unaffected " "
"
8 Unaffected per ANSI "
Z124.1-1971
Methyl Benzoate 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Methyl Chloride 0 Not resistant ACRYLITE PLUS; CYRO Industries
Methyl Cyclohexanol 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Methyl Ethyl Ketone 25 0.6 6 Cleaned by application Per ASTM D-1300; Aristech I-300; Aristech
of a mild abrasive 2]3 drops applied
and covered with
watch glass
0 Not resistant ACRYLITE PLUS; CYRO Industries
Methyl Naphthalene 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Methyl Salicylate 23 2 " "
Methylamine 23 8 Satisfactory resistance "
Methylene Dichloride 23 2 Unsatisfactory resistance "
Metoquinone 23 8 Satisfactory resistance "
97
98
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Nitric Acid (cont) ,20 9 Resistant ACRYLITE PLUS; CYRO Industries
.70 0 Not resistant "
20]70 5 Limited resistance "
Nitrobenzene 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Nitrogen Dioxide 9 Resistant ACRYLITE PLUS; CYRO Industries
Nitrogen Monoxide 9 " "
Nutmeg 9 " "
Octane n-octane 23 5 Some attack but only Diakon; ICI; Specimen: Small,
slight reduction in unstressed samples
mechanical properties
9 Resistant ACRYLITE PLUS; CYRO Industries
Oleic Acid 25 7 9 0 Aristech GPA; Aristech
25 7 9 0 Aristech I-300; Aristech
Olive Oil 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
8 Unaffected per ANSI Aristech I-300; Aristech
Z124.1-1971
Onions 9 Resistant ACRYLITE PLUS; CYRO Industries
Outdoor Weathering Florence, Kentucky; 730 7 Aristech 300; Aristech; Specimen:
45 degrees south 3.2 mm (0.125 in) nominal
caliper, continuous cast
" 730 7 Aristech GPA; Aristech; Specimen:
5.6 mm (0.22 in) nominal caliper,
continuous cast
" 730 7 Aristech GPA; Aristech; Specimen:
3.2 mm (0.125 in) nominal
caliper, continuous cast
99
100
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Phenol (cont) solution 5 5 Stained and required Aristech S-300; Aristech;
sanding to remove per Specimen: Uncovered specimen
ANSI Z124.1-1987
23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
0 Not resistant ACRYLITE PLUS; CYRO Industries
Phenol Resins 0 " "
Phosphates 9 Resistant "
Phosphoric Acid 10 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
95 23 2 Unsatisfactory resistance "
,20 9 Resistant ACRYLITE PLUS; CYRO Industries
Phosphorus white 0 Not resistant "
Phosphorus Trichloride 0 " "
Photographic Fixing 9 Resistant "
Baths
Piperidine 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Polypropylene Adipate 23 8 Satisfactory resistance "
Polypropylene Laurate 23 8 " "
Polypropylene 23 8 " "
Sebacate
Potash caustic 9 Resistant ACRYLITE PLUS; CYRO Industries
Potassium Carbonate 9 " "
Potassium Chlorate saturated solution 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Potassium Cyanide 9 Resistant ACRYLITE PLUS; CYRO Industries
101
102
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Sodium Carbonate 2 25 7 9 0.5 Aristech I-300; Aristech
(cont)
2 25 7 9 0.5 Aristech I-300;
saturated solution 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
" 23 8 " Diakon; Specimen: Small,
unstressed samples
9 Resistant ACRYLITE PLUS; CYRO Industries
Sodium Chlorate saturated solution 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
9 Resistant ACRYLITE PLUS; CYRO Industries
Sodium Chloride 10 23 7 8 0.6 Chemical resistance Acrylite H-12; CYRO Industries
per ASTM D543
10 23 7 8 0.6 " Acrylite H-15; CYRO Industries
10 23 7 8 0.6 " Acrylite M-30; CYRO Industries
10 25 7 9 0.3 Aristech GPA; Aristech
10 25 7 9 0.4 Aristech I-300; Aristech
9 Resistant ACRYLITE PLUS; CYRO Industries
Sodium Hydroxide 1 25 7 9 0.4 Aristech GPA; Aristech
1 25 7 9 0.5 Aristech I-300; Aristech
10 23 7 8 0.6 Chemical resistance Acrylite H-12; CYRO Industries
per ASTM D543
10 23 7 8 0.6 " Acrylite H-15; CYRO Industries
10 23 7 8 0.6 " Acrylite M-30; CYRO Industries
10 25 7 9 0.3 Aristech GPA; Aristech
10 25 7 9 0.4 Aristech I-300; Aristech
saturated solution 23 8 Satisfactory resistance Diakon; ICI
103
104
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Sulfuric Acid (cont) 98 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
,30 9 Resistant ACRYLITE PLUS; CYRO Industries
Sulfurous Acid ,5 9 " "
concentrated 5 Limited resistance "
Sulfuryl Chloride 9 Resistant "
Tartaric Acid saturated solution 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Tea 9 Resistant ACRYLITE PLUS; CYRO Industries
8 Unaffected per ANSI Aristech I-300; Aristech
Z124.1-1971
Tetrachloroethene 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
Tetrahydrofuran 23 2 " "
Tetrahydronaphthalene Tetraline 23 2 " "
Thionyl Chloride 0 Not resistant ACRYLITE PLUS; CYRO Industries
Toluene 23 2 Unsatisfactory resistance Diakon; ICI
23 2 " Diakon; ICI; Specimen: Small,
unstressed samples
25 0.6 6 Cleaned by application Per ASTM D-1300; Aristech I-300; Aristech
of a mild abrasive 2]3 drops applied
and covered with
watch glass
25 7 5 Dissolved 0 Aristech GPA; Aristech
25 7 9 0 Aristech I-300; Aristech
0 Not resistant ACRYLITE PLUS; CYRO Industries
4 Stained and required Aristech I-300; Aristech
phenol solution to
105
106
%
% Retained
Temp. Time PDL Change
Exposure medium Exp. medium note Conc. (%) Resistance note Test note Material note
(C) (days) # Tensile Impact
Weight
strength strength
Vegetable Oils 9 Resistant ACRYLITE PLUS; CYRO Industries
Vinegar 9 " "
8 Unaffected per ANSI Aristech I-300; Aristech
Z124.1-1971
Water 23 8 Satisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
distilled, all 25 7 9 0.4 Aristech GPA; Aristech
concentrations
" 25 7 9 0.5 Aristech I-300; Aristech
9 Resistant ACRYLITE PLUS; CYRO Industries
mineral 9 " "
Waxes Polishes 5 Limited resistance "
Weak Acids 2 Poor resistance RTP 1800; RTP Company
Weak Alkalis 7 Good resistance "
Whitewash 9 Resistant ACRYLITE PLUS; CYRO Industries
Wines 9 " "
Xylene 23 2 Unsatisfactory resistance Diakon; ICI; Specimen: Small,
unstressed samples
0 Not resistant ACRYLITE PLUS; CYRO Industries
Zinc Sulfate aqueous 9 Resistant "
solid 9 " "
2. Acrylonitrile Polymers
Chapter Outline:
2.1 Acrylonitrile Methyl Acrylate (AMA)
2.2 Acrylonitrile Styrene Acrylate (ASA)
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Acetaldehyde 23 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
softened; ballooned capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 0]112 4 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost capped, per method PT-60, 50% Relative Humidity
38 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Acetic Acid 5 23 3 Good resistance; satisfactory 24.36 " "
for 16 to 20 weeks
5 38 3 " 29.01 " "
25 23 4 " 23.33 " "
25 38 3 " 28.56 " "
99 23 9 Excellent resistance; 20.38 " "
satisfactory @ 1 year
99 38 3 Poor resistance; failure @ less " "
than 16 weeks
99.8 23 365 8 Satisfactory @ 1 year; slight 20.38 Barex 210; BP Chemicals
frost
99.8 23 365 8 " 20.38 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
99.8 38 84 2 Test failed; frost; softened Barex 210; BP Chemicals
99.8 38 84 2 " Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
Acetic Anhydride 23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 3 " " "
109
110
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Benzaldehyde 23 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
softened; top concave capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost; softened capped, per method PT-60, 50% Relative Humidity
38 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Benzene 23 365 6 21.06 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
23 365 7 Satisfactory @ 1 year; good 21.06 "
appearance
23 8 Excellent resistance; 21.06 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 1 26.39 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
38 365 4 Satisfactory @ 1 year; good 26.39 "
appearance
38 5 Excellent resistance; 26.39 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Benzoyl Peroxide 23 3 Poor resistance; failure @ less " "
than 16 weeks
23 9 Excellent resistance; 10.20 " "
satisfactory @ 1 year
Bleach sodium hypochlorite 5.25 23 365 5 Satisfactory @ 1 year; good 23.2 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
27.28
111
112
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Butyl Cellosolve 23 9 Excellent resistance; 10.39 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
Acetate (cont) satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 8 Satisfactory @ 1 year; good 0.55 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
38 9 Excellent resistance; 10.55 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Butyl Ether 23 365 8 Satisfactory @ 1 year; good 20.31 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 9 Excellent resistance; 20.31 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Calcium Chloride 23 8 " 21.48 " "
38 8 " 21.41 " "
Calcium Hydroxide saturated 23 6 " 24.19 " "
" 38 5 " 29.13 " "
saturated solution 23 365 5 Satisfactory @ 1 year; good 24.19 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
" 38 365 4 " 29.13 "
Calcium 23 9 Excellent resistance; 20.20 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
Hypochlorite satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 8 " 10.91 " "
Carbon Bisulfite 23 2 Poor resistance; failure @ less 236.80 " "
than 16 weeks
38 2 " 276.93 " "
Carbon Tetrachloride 23 365 6 Satisfactory @ 1 year; good 22.8 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
113
Plastikote Choke & 38 56 9 " " "
Cart
114
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Cresol mixture of ortho, 23 56 2 Test failed; softened; cracking Barex 210; BP Chemicals; Specimen: 6 oz bottles,
meta & para capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
mixture of ortho, 38 56 2 Test failed; softened; cracking Barex 210; BP Chemicals; Specimen: 6 oz bottles,
meta & para capped, per method PT-60, 50% Relative Humidity
38 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Cyclohexanone 23 365 7 Satisfactory for 16]20 weeks; 0.15 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
slight frost capped, per method PT-60, 50% Relative Humidity
23 7 Good resistance; satisfactory 10.15 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
for 16 to 20 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost; softened capped, per method PT-60, 50% Relative Humidity
38 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Daquiri cocktail 5 540 8 No change 20.99 50% Relative Humidity Barex; BP Chemicals; Specimen: Bottle size 6 oz
" 23 540 7 " 22.84 " "
" 38 540 1 Caved in 211.40 " "
1,2-Dichlorobenzene 23 365 9 Satisfactory @ 1 year; good 20.24 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 9 Excellent resistance; 20.24 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 7 Satisfactory @ 1 year; good 20.79 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
115
116
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Diethylamine (cont) 23 9 Excellent resistance; 10.14 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 112]140 4 Satisfactory for 16]20 weeks; 22.65 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
rounded bottom capped, per method PT-60, 50% Relative Humidity
38 4 Good resistance; satisfactory 22.65 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
for 16 to 20 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Diethylene Dioxide 23 5 " " "
38 3 Poor resistance; failure @ less " "
than 16 weeks
Diethylene Glycol 2,2-dihydroxyl 23 365 7 Satisfactory @ 1 year; good 1.11 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
diethyl ether appearance capped, per method PT-60, 50% Relative Humidity
23 8 Excellent resistance; 11.11 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
2,2-dihydroxyl 38 365 6 Satisfactory @ 1 year; good 2.2 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
diethyl ether appearance capped, per method PT-60, 50% Relative Humidity
38 7 Excellent resistance; 12.20 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Diethylformamide 23 0]112 0 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
dissolved bottle capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 0]112 0 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
dissolved bottle capped, per method PT-60, 50% Relative Humidity
38 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
117
118
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Edible Oils crisco oil 23 154 9 No change 10.02 50% Relative Humidity Barex; BP Chemicals; Specimen: Bottle size 6 oz
mazola oil 23 154 9 " 10.26 " "
planters olive oil 23 154 9 " 10.17 " "
safflower oil 23 154 9 " 10.24 " "
sutana olive oil 23 154 9 " 10.14 " "
wesson oil 23 154 9 " 10.15 " "
crisco oil 38 154 9 " 10.16 " "
mazola oil 38 154 9 " 10.26 " "
planters olive oil 38 154 9 " 10.10 " "
safflower oil 38 154 9 " 10.20 " "
sutana olive oil 38 154 9 " 10.16 " "
wesson oil 38 154 9 " 10.18 " "
Essential Oils balsam fir oil 23 280 9 " 20.11 " "
clove oil 23 280 9 " 20.22 " "
lemon oil 23 280 8 " 20.94 " "
nutmeg oil 23 280 9 " 20.19 " "
orange oil 23 280 8 " 21.06 " "
siberian pine oil 23 280 9 " 20.04 " "
wintergreen oil 23 280 9 " 20.01 " "
camphorated oil 23 360 9 " 20.23 " Barex; BP Chemicals; Specimen: Bottle size 1.5 oz
citronella oil 23 360 9 " 20.29 " "
imitation vanilla 23 360 5 " 210.93 " "
extract
penick almond oil 23 360 9 " 20.02 " Barex; BP Chemicals; Specimen: Bottle size 6 oz
peppermint essence 23 360 6 " 23.30 " Barex; BP Chemicals; Specimen: Bottle size 1.5 oz
21.02
119
120
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Ethyl Alcohol (cont) 23 9 Excellent resistance; 20.16 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 4 Satisfactory @ 1 year; very 3.07 Barex 210; BP Chemicals
slight frost; round bottom
38 365 4 " 3.07 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
hydroxylethylamine 38 365 5 Satisfactory @ 1 year; good 5.99 Barex 210; BP Chemicals
appearance
" 38 365 5 " 5.99 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
38 6 Excellent resistance; 13.07 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Ethyl Ether 23 9 " " "
Ethyl Methacrylate 23 365 8 Satisfactory @ 1 year; good 20.71 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 9 Excellent resistance; 20.71 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 7 Satisfactory @ 1 year; good 21.28 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
38 8 Excellent resistance; 21.28 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Ethylbenzene 23 365 7 Satisfactory @ 1 year; good 20.96 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 8 Excellent resistance; 20.96 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
22.81
121
for 16 to 20 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
122
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Formic Acid 5 23 365 5 Satisfactory @ 1 year; slight 24 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost capped, per method PT-60, 50% Relative Humidity
5 23 6 Excellent resistance; 24.00 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
5 38 112]140 3 Satisfactory for 16]20 weeks; 28.46 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost; softened capped, per method PT-60, 50% Relative Humidity
5 38 3 Good resistance; satisfactory 28.46 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
for 16 to 20 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
90 23 1 2 Test failed; softened Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
90 23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Fuel Additive Multi Mac; diesel 23 9 9 No change 20.08 50% Relative Humidity Barex; BP Chemicals; Specimen: Bottle size 12 oz
Multi Mac; gasoline 23 9 9 " 10.18 " "
gasoline 38 9 8 Frosted 10.07 " "
Multi Mac; diesel 38 9 9 No change 20.71 " "
Motor-Klenz; 38 30 9 " 10.01 " "
improver
gasoline 49 9 7 Severe bulge 10.05 " "
Multi Mac; diesel 49 9 4 Bloating 21.49 " "
Lubrizol 8195 300#/ 49 180 9 No change 20.40 " Barex; BP Chemicals; Specimen: Bottle size 8 oz
MB
Furfuryl Alcohol 23 56 2 Test failed; soft; cracked Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
123
124
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Hexane (cont) 38 0]112 2 Test failed in ,16 weeks; 24.93 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
round bottom capped, per method PT-60, 50% Relative Humidity
38 2 Poor resistance; failure @ less 24.93 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Hydrochloric Acid 10 23 365 5 Satisfactory @ 1 year; good 23.03 Barex 210; BP Chemicals
appearance
10 23 365 5 " 23.03 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
10 23 6 Excellent resistance; 23.03 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
10 38 365 4 Satisfactory @ 1 year; good 26.1 Barex 210; BP Chemicals
appearance
10 38 365 4 " 26.1 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
10 38 5 Excellent resistance; 26.10 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
30 23 365 2 Test failed in ,16 weeks; Barex 210; BP Chemicals
frost; yellow; milky liquid
30 23 365 2 " Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
30 23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
30 38 3 " " "
Hydrofluoric Acid solution 5 23 2 " 24.94 " "
" 5 38 2 " 210.10 " "
" 15 23 2 " 26.83 " "
125
126
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Lactic Acid 23 365 8 Satisfactory @ 1 year; good 20.29 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 9 Excellent resistance; 20.29 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 7 Satisfactory @ 1 year; good 21.41 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
38 8 Excellent resistance; 21.41 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Leak Repair Bars Leak 23 90 9 No change 20.17 50% Relative Humidity Barex; BP Chemicals; Specimen: Bottle size 6 oz
" 38 90 9 " 20.20 " "
Mai Tai cocktail 5 540 8 " 21.00 " "
" 23 540 7 " 22.91 " "
" 38 540 1 Caved in 211.70 " "
Margarita " 5 540 8 No change 20.99 " "
" 23 540 7 " 22.72 " "
" 38 540 1 Caved in 211.20 " "
Methacrylonitrile 23 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost; softened capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost; softened capped, per method PT-60, 50% Relative Humidity
38 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Methyl Acrylate 23 112]140 5 Satisfactory for 16]20 weeks; 21.07 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
127
128
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Methyl Methacrylate 23 365 7 Satisfactory @ 1 year; good 21.08 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 8 Excellent resistance; 21.08 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 7 Satisfactory @ 1 year; good 20.88 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
38 9 Excellent resistance; 10.02 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 8 " 20.88 " "
Methyl Salicylate methyl 23 140 9 Satisfactory resistance 20.03 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
2-hydroxybenzoate capped, per method PT-60, 50% Relative Humidity
23 9 Excellent resistance; 20.03 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
methyl 38 140 9 Satisfactory resistance 20.1 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
2-hydroxybenzoate capped, per method PT-60, 50% Relative Humidity
38 9 Excellent resistance; 20.10 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Methylene Chloride 23 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals; Specimen: 6 oz bottles,
frost; softened; rubbery capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Motor Oils BP Nitrex 23 390 9 No change 10.09 50% Relative Humidity Barex; BP Chemicals; Specimen: Bottle size 6 oz
38 390 9 " 10.11 " "
BP Nitrex 38 390 9 " 10.07 " "
Nail Polish 23 60 8 " 20.80 " "
129
appearance
130
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Pentyl Acetone 23 9 Excellent resistance; 10.11 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
(cont) satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 8 Satisfactory @ 1 year; good 20.36 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
38 9 Excellent resistance; 20.36 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Petroleum Ether 23 84 8 Satisfactory @ 1 year; good Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 9 Excellent resistance; 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Phenol 23 21 3 Top concave; softened Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Phosphoric Acid 10 23 365 6 Satisfactory @ 1 year; good 22.92 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
10 23 7 Excellent resistance; 22.92 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
10 38 365 5 Satisfactory @ 1 year; good 25.83 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
10 38 5 Excellent resistance; 25.83 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
30 23 365 6 Satisfactory @ 1 year; good 22.92 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
30 23 7 Excellent resistance; 22.92 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
131
132
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Propylene Glycol 38 7 Excellent resistance; 12.02 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
(cont) satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Propylhexedrine 1-cyclohexyl- 23 365 8 Satisfactory @ 1 year; good 0.47 Barex 210; BP Chemicals; Specimen: 12 gram
2-methyl appearance containers, per method PT-60, 50% Relative
aminopropane Humidity
23 9 Excellent resistance; 10.47 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
1-cyclohexyl- 38 365 7 Satisfactory @ 1 year; good 0.91 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
2-methyl appearance capped, per method PT-60, 50% Relative Humidity
aminopropane
38 8 Excellent resistance; 10.91 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Rust Inhibitor autoarmor inside 23 30 9 No change 0.00 50% Relative Humidity Barex; BP Chemicals; Specimen: Bottle size 6 oz
coating
Number 13 23 30 8 " 21.13 " "
outside coating 23 30 9 " 10.01 " "
" 38 30 9 " 20.10 " "
autoarmor inside 38 30 9 " 20.14 " "
coating
Shake Oil 23 56 9 " 10.02 " "
38 56 9 " 20.21 " "
Sodium Bicarbonate 10 23 365 5 Satisfactory @ 1 year; good 23.92 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
10 23 6 Excellent resistance; 23.92 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
10 38 365 3 Satisfactory @ 1 year; tinted 27.63 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
133
134
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Sodium Hydroxide 10 23 6 Excellent resistance; 23.00 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
(cont) satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
10 38 0]112 2 Test failed in ,16 weeks; Barex 210; BP Chemicals
frost; softened
10 38 0]112 2 " Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
10 38 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
30 23 365 8 Satisfactory @ 1 year; good 20.61 Barex 210; BP Chemicals
appearance
30 23 365 8 " 20.61 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
30 23 9 Excellent resistance; 20.61 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
30 38 112]140 5 Satisfactory for 16 to 20 Barex 210; BP Chemicals
weeks; frost
30 38 112]140 5 " Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
30 38 5 Good resistance; satisfactory 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
for 16 to 20 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Sodium Hypochlorite bleach 5 23 6 Excellent resistance; 23.20 " "
satisfactory @ 1 year
" 5 38 3 Good resistance; satisfactory 27.28 " "
for 16 to 20 weeks
bleaches 5.25 23 365 5 Satisfactory @ 1 year; good 23.2 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
27.28
135
136
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Sulfuric Acid (cont) 30 38 6 Excellent resistance; 23.54 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Tetrachloroethene 23 365 7 Satisfactory @ 1 year; good 21.47 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
perchloroethylene 23 365 7 " 21.47 "
tetrachloroethylene 23 365 7 " 21.47 "
23 8 Excellent resistance; 21.47 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 5 Satisfactory @ 1 year; good 23.99 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
perchloroethylene 38 365 5 " 23.99 "
tetrachloroethylene 38 365 5 " 23.99 "
38 6 Excellent resistance; 23.99 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Tetrahydrofuran 23 168 2 Distorted; cracked Barex 210; BP Chemicals; Specimen: 6 oz bottles,
capped, per method PT-60, 50% Relative Humidity
23 3 Poor resistance; failure @ less 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
than 16 weeks between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Tetrahydrofurfuryl 23 9 Excellent resistance; 20.33 " "
satisfactory @ 1 year
38 5 Good resistance; satisfactory 21.23 " "
for 16 to 20 weeks
Tetrahydrofurfuryl 23 365 8 Satisfactory @ 1 year; good 20.33 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
Alcohol appearance capped, per method PT-60, 50% Relative Humidity
38 112]140 5 Satisfactory for 16]20 weeks; 21.23 "
frost
137
138
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Test note Material note
(%) (C) (days) #
Weight
Triethylamine (cont) 38 7 Excellent resistance; 21.56 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Urea 23 365 9 Satisfactory @ 1 year; good 20.05 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
23 9 Excellent resistance; 20.05 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 9 Satisfactory @ 1 year; good 20.13 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
38 9 Excellent resistance; 20.13 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Water distilled, all 23 365 5 Satisfactory @ 1 year; good 23.73 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
concentrations appearance capped, per method PT-60, 50% Relative Humidity
" 38 365 4 Satisfactory for 16]20 weeks; 211.45 "
slight frost
Xylene 23 365 7 Satisfactory @ 1 year; good 21.19 "
appearance
23 8 Excellent resistance; 21.19 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
38 365 7 Satisfactory @ 1 year; good 20.99 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
38 8 Excellent resistance; 20.99 50% Relative Humidity Barex; BP Chemicals; Specimen: Extruded blow
satisfactory @ 1 year between 6 months and molded bottles, typically 4]8 oz in size and
1 year cylindrical shape
Zinc Chloride Solid 23 365 7 Satisfactory @ 1 year; good 1.03 Barex 210; BP Chemicals; Specimen: 6 oz bottles,
appearance capped, per method PT-60, 50% Relative Humidity
" 23 365 7 " 1.03 Barex 210; Specimen: 6 oz bottles, capped, per
method PT-60, 50% Relative Humidity
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Acetamide 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 9 " "
Acetic Acid 5 20 0]365 9 " Luran S 757 R; BASF
5 20 0]365 9 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
5 50 0]365 7 Resistant for months Luran S 757 R; BASF
5 50 0]365 7 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
25 20 0]365 9 Resistant for years Luran S 757 R; BASF
25 20 0]365 9 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
25 50 0]365 7 Resistant for months Luran S 757 R; BASF
25 50 0]365 7 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 20 0]365 7 " Luran S 757 R; BASF
50 20 0]365 7 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 50 0]365 4 Resistant for days Luran S 757 R; BASF
50 50 0]365 4 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
20 0]365 3 Resistant for hrs Luran S 757 R; BASF
20 0]365 3 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 3 " Luran S 757 R; BASF
50 0]365 3 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
Acetol 20 0]365 5 Resistant for weeks "
Acetone 20 0]365 0 Dissolved "
50 0]365 0 " "
Acetophenone 20 0]365 0 " "
50 0]365 0 " "
Acetylene 20 0]365 5 Resistant for weeks "
Acetylsalicylic Acid saturated solution 20 0]365 7 Resistant for months "
" 50 0]365 7 " "
Allyl Alcohol 20 0]365 3 Resistant for hrs "
50 0]365 3 " "
Allyl Mustard Oil 20 0]365 0 Dissolved "
50 0]365 0 " "
139
Almond Oil bitter 20 0]365 7 Resistant for months "
140
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Almond Oil (cont) sweet 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
bitter 50 0]365 5 Resistant for weeks "
sweet 50 0]365 9 Resistant for years "
Aluminum Acetate 20 0]365 9 " "
50 0]365 7 Resistant for months "
Aluminum Chloride solution 20 0]365 9 Resistant for years "
" 50 0]365 9 " "
Aluminum Potassium 20 0]365 9 " "
Sulfate
50 0]365 9 " "
Aluminum Sulfate solution 20 0]365 9 " "
" 50 0]365 9 " "
Ammonia aqueous solution 25 20 0]365 9 " "
" 25 50 0]365 7 Resistant for months "
Ammonium Carbonate solution 20 0]365 9 Resistant for years "
" 50 0]365 7 Resistant for months "
Ammonium Molybdate " 20 0]365 9 Resistant for years "
" 50 0]365 9 " "
Ammonium Nitrate solutions 20 0]365 9 " "
" 50 0]365 9 " "
Ammonium Rhodanide solution 20 0]365 7 Resistant for months "
" 50 0]365 7 " "
Ammonium Sulfate " 20 0]365 9 Resistant for years "
" 50 0]365 9 " "
Amyl Acetate 20 0]365 0 Dissolved "
141
142
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Benzoic Acid 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 9 " "
Benzyl Acetate 20 0]365 0 Dissolved "
50 0]365 0 " "
Benzyl Alcohol 20 0]365 0 " "
50 0]365 0 " "
beta-Naphthol dissolved in alcohol 20 0]365 5 Resistant for weeks "
" 50 0]365 3 Resistant for hrs "
Bismuth Chloride solution 20 0]365 9 Resistant for years "
" 50 0]365 9 " "
Bismuth Subnitrate " 20 0]365 9 " "
" 50 0]365 9 " "
Bleach solutions 12 20 0]365 9 " "
" 12 50 0]365 9 " "
Boric Acid solution 20 0]365 9 " "
" 50 0]365 9 " "
Brake Fluids ATE 20 0]365 3 Resistant for hrs "
BASF 20 0]365 3 " "
ATE 50 0]365 3 " "
BASF 50 0]365 3 " "
Brandy 20 0]365 9 Resistant for years "
Bromine bromine liquid 20 0]365 3 Resistant for hrs "
50 0]365 3 " "
Bromochloromethane 20 0]365 3 " "
50 0]365 3 " "
143
50 0]365 9 " "
144
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Carbon Tetrachloride 20 0]365 3 Resistant for hrs Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 0 Dissolved "
Cardamom ground 20 0]365 9 Resistant for years "
" 50 0]365 7 Resistant for months "
Carrot Juice 20 0]365 9 Resistant for years "
Castor Oil 20 0]365 9 " "
sulfated 20 0]365 9 " "
50 0]365 9 " "
sulfated 50 0]365 9 " "
Cetamoll 13 ester of an aromatic 20 0]365 4 Resistant for days "
monocarboxylic acid
" 50 0]365 4 " "
Cetyl Alcohol 20 0]365 9 Resistant for years "
50 0]365 9 " "
Chlorine chlorine water 20 0]365 5 Resistant for weeks "
dry gas 20 0]365 3 Resistant for hrs "
Liquid 20 0]365 3 " "
dry gas 50 0]365 3 " "
Liquid 50 0]365 3 " "
Chloroacetic Acid 20 0]365 4 Resistant for days "
50 0]365 3 Resistant for hrs "
Chlorobenzene 20 0]365 3 " "
50 0]365 3 " "
Chloroform 20 0]365 0 Dissolved "
50 0]365 0 " "
145
146
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Cyclohexanol (cont) 50 0]365 5 Resistant for weeks Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 5 " Luran S 757 R; Specimen: Uncolored, unstressed
Cyclohexanone 20 0]365 0 Dissolved Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 0 " "
Dairy Products 20 0]365 9 Resistant for years "
50 0]365 9 " "
DDT emulsion 20 0]365 3 Resistant for hrs "
" 50 0]365 3 " "
Decahydronaphthalene 20 0]365 4 Resistant for days "
50 0]365 4 " "
Dehydroacetic Acid 20 0]365 9 Resistant for years "
50 0]365 7 Resistant for months "
Detergents solutions 20 0]365 9 Resistant for years "
" 20 0]365 9 " Luran S 757 R; Specimen: Uncolored, unstressed
Diacetone Alcohol 20 0]365 0 Dissolved Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 0 " "
Dibutyl Phthalate dibutyl phthalate 20 0]365 3 Resistant for hrs "
Palatinol C 20 0]365 3 " "
dibutyl phthalate 20 0]365 3 " Luran S 757 R; Specimen: Uncolored, unstressed
Palatinol C 20 0]365 3 " "
dibutyl phthalate 50 0]365 3 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
Palatinol C 50 0]365 3 " "
dibutyl phthalate 50 0]365 3 " Luran S 757 R; Specimen: Uncolored, unstressed
Palatinol C 50 0]365 3 " "
Dichlorobenzene 20 0]365 0 Dissolved Luran S 757 R; BASF; Specimen: Uncolored, unstressed
147
148
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Ethyl Chloride 20 0]365 0 Dissolved Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 0 " "
Ethylbenzene 20 0]365 0 " "
50 0]365 0 " "
Ethylene Glycol 20 0]365 9 Resistant for years "
50 0]365 9 " "
Ethylene Glycol Ethers ethylene glycol mono(ethyl to 20 0]365 3 Resistant for hrs "
butyl) ethers
" 50 0]365 3 " "
Eucalyptus Oil 20 0]365 4 Resistant for days "
50 0]365 4 " "
Ferrous Chloride 20 0]365 9 Resistant for years "
solution 20 0]365 9 " "
50 0]365 7 Resistant for months "
solution 50 0]365 7 " "
Fertilizers fertilizer salts 20 0]365 9 Resistant for years "
" 50 0]365 9 " "
Foot Oil Neat's Foot Oil 20 0]365 9 " "
" 50 0]365 9 " "
Formaldehyde 30 20 0]365 7 Resistant for months "
30 50 0]365 5 Resistant for weeks "
Formic Acid 40 20 0]365 9 Resistant for years "
40 50 0]365 5 Resistant for weeks "
85 20 0]365 5 " "
85 50 0]365 4 Resistant for days "
149
pork dripping 50 0]365 9 Resistant for years "
150
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Greases cup grease 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
mirror housing 25 7 9 Tensile strength retained is at yield 100 Geloy 1120; GE Plastics
cup grease 50 0]365 7 Resistant for months Luran S 757 R; BASF; Specimen: Uncolored, unstressed
Gum Tragacanth 20 0]365 9 Resistant for years "
50 0]365 7 Resistant for months "
Heptyl Alcohol 20 0]365 7 " "
50 0]365 5 Resistant for weeks "
Hexachlorobenzene 20 0]365 9 Resistant for years "
50 0]365 9 " "
Hexane 20 0]365 9 " "
Hexanetriol 20 0]365 7 Resistant for months "
50 0]365 7 " "
Hexyl Alcohol 20 0]365 7 " "
50 0]365 5 Resistant for weeks "
Honey 20 0]365 9 Resistant for years "
50 0]365 9 " "
Horseradish sauce 20 0]365 7 Resistant for months "
Hydrochloric Acid 10 25 7 8 Tensile strength retained is at yield 90 Geloy 1120; GE Plastics
15 20 0]365 7 Resistant for months Luran S 757 R; BASF
15 20 0]365 7 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
15 50 0]365 5 Resistant for weeks Luran S 757 R; BASF
15 50 0]365 5 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
40 20 0]365 5 " Luran S 757 R; BASF
40 20 0]365 5 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
40 50 0]365 5 " Luran S 757 R; BASF
151
152
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Laurel ground 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
" 50 0]365 9 " "
Lauryl Alcohol 20 0]365 9 " "
50 0]365 9 " "
Lead Acetate 20 0]365 9 " "
50 0]365 9 " "
Lead Nitrate 20 0]365 9 " "
50 0]365 7 Resistant for months "
Lead Stearate 20 0]365 9 Resistant for years "
50 0]365 9 " "
Lead Sulfate 20 0]365 9 " "
50 0]365 9 " "
Lemon Grass Oil 20 0]365 3 Resistant for hrs "
50 0]365 3 " "
Lemon Oil 20 0]365 5 Resistant for weeks "
50 0]365 4 Resistant for days "
Licorice powder 20 0]365 9 Resistant for years "
" 50 0]365 9 " "
Ligroin 20 0]365 9 " "
50 0]365 7 Resistant for months "
Linseed Oil 20 0]365 9 Resistant for years "
50 0]365 9 " "
Mace ground 20 0]365 9 " "
" 50 0]365 5 Resistant for weeks "
Magnesium Bromide 20 0]365 9 Resistant for years "
153
154
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Methyl Isopropyl 20 0]365 0 Dissolved Luran S 757 R; BASF; Specimen: Uncolored, unstressed
Ketone
50 0]365 0 " "
155
156
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Outdoor Weathering Arizona 180 8 E color change of 2.72 (Hunter); Geloy 1320; GE Plastics; Specimen: 1.5 mm (0.060 mm)
(cont) retains 92% of gloss extruded, solid sheet, high gloss
" 360 6 E color change of 1.09 (Hunter D-25 Geloy 1220; GE Plastics; Specimen: 1 mm (0.040 in) thick
D2-P color meter) dark brown extruded profile
Florida 360 6 E color change of 1.62 (Hunter D-25 "
D2-P color meter)
Arizona 360 5 " Geloy 1221; GE Plastics; Specimen: 1 mm (0.040 in) thick
dark brown extruded profile
Florida 360 5 E color change of 0.98 (Hunter D-25 "
D2-P color meter)
Arizona 360 7 E color change of 2.94 (Hunter); Geloy 1320; GE Plastics; Specimen: 1.5 mm (0.060 mm)
retains 80% of gloss extruded, solid sheet, high gloss
" 720 5 E color change of 1.16 (Hunter D-25 Geloy 1220; GE Plastics; Specimen: 1 mm (0.040 in) thick
D2-P color meter) dark brown extruded profile
Florida 720 5 E color change of 2 (Hunter D-25 "
D2-P color meter)
Arizona 720 4 E color change of 2.42 (Hunter D-25 Geloy 1221; GE Plastics; Specimen: 1 mm (0.040 in) thick
D2-P color meter) dark brown extruded profile
Florida 720 4 E color change of 1.56 (Hunter D-25 "
D2-P color meter)
Arizona 720 6 E color change of 2.46 (Hunter); Geloy 1320; GE Plastics; Specimen: 1.5 mm (0.060 mm)
retains 71% of gloss extruded, solid sheet, high gloss
" 1080 5 E color change of 1.93 (Hunter D-25 Geloy 1220; GE Plastics; Specimen: 1 mm (0.040 in) thick
D2-P color meter) dark brown extruded profile
Florida 1080 4 E color change of 3.27 (Hunter D-25 "
D2-P color meter)
Arizona 1080 3 E color change of 3.1 (Hunter D-25 Geloy 1221; GE Plastics; Specimen: 1 mm (0.040 in) thick
D2-P color meter) dark brown extruded profile
Florida 1080 4 E color change of 2.02 (Hunter D-25 "
157
158
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Peppermint Oil 20 0]365 3 Resistant for hrs Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 3 " "
Perhydrol 20 0]365 9 Resistant for years "
Petroleum Ether 20 0]365 5 Resistant for weeks "
50 0]365 4 Resistant for days "
Petroleum Jelly 20 0]365 9 Resistant for years "
50 0]365 9 " "
Phenacetin 20 0]365 9 " "
50 0]365 9 " "
Phenol 10 20 0]365 4 Resistant for days "
10 50 0]365 4 " "
20 0]365 3 Resistant for hrs "
50 0]365 3 " "
Phenylethyl Alcohol 20 0]365 3 " "
50 0]365 3 " "
Phosphoric Acid 1 20 0]365 9 Resistant for years "
1 50 0]365 7 Resistant for months "
30 20 0]365 7 " "
30 50 0]365 7 " "
86 20 0]365 7 " "
86 50 0]365 7 " "
Phthalic Acid solution 20 0]365 9 Resistant for years "
" 50 0]365 9 " "
Pimento ground 20 0]365 5 Resistant for weeks "
" 50 0]365 4 Resistant for days "
159
160
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Potassium 20 0]365 7 Resistant for months Luran S 757 R; BASF; Specimen: Uncolored, unstressed
Permanganate
50 0]365 4 Resistant for days "
Potassium Persulfate 20 0]365 9 Resistant for years "
50 0]365 7 Resistant for months "
Potassium Sulfate 20 0]365 9 Resistant for years "
50 0]365 9 " "
Potassium Sulfide 20 0]365 9 " "
50 0]365 9 " "
Prontosil 20 0]365 9 " "
Propane liquid 20 0]365 9 " "
2-Propyl Acetate 20 0]365 0 Dissolved "
50 0]365 0 " "
Propyl Alcohol 1-propanol 20 0]365 7 Resistant for months "
" 50 0]365 4 Resistant for days "
Propylene Dichloride 20 0]365 0 Dissolved "
50 0]365 0 " "
Propylene Glycol 20 0]365 9 Resistant for years "
50 0]365 7 Resistant for months "
Propylene Glycol 20 0]365 3 Resistant for hrs "
Methyl Ether
50 0]365 3 " "
1,2-Propylene Oxide 20 0]365 3 " "
50 0]365 3 " "
Pyridine 20 0]365 0 Dissolved "
161
20 0]365 9 " Luran S 757 R; Specimen: Uncolored, unstressed
162
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Sodium Carbonate 50 0]365 7 Resistant for months Luran S 757 R; BASF; Specimen: Uncolored, unstressed
(cont)
50 0]365 7 " Luran S 757 R; Specimen: Uncolored, unstressed
Sodium Chloride 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 9 " "
Sodium Chromate 20 0]365 9 " "
50 0]365 7 Resistant for months "
Sodium Fluoride 20 0]365 9 Resistant for years "
50 0]365 9 " "
Sodium Hydrosulfite 20 0]365 9 " "
50 0]365 7 Resistant for months "
Sodium Hydroxide 10 25 7 7 Tensile strength retained is at yield 80]90 Geloy 1120; GE Plastics
10 25 7 8 " 90 "
50 20 0]365 9 Resistant for years Luran S 757 R; BASF
50 20 0]365 9 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 50 0]365 7 Resistant for months Luran S 757 R; BASF
50 50 0]365 7 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
20 0]365 9 Resistant for years Luran S 757 R; BASF
20 0]365 9 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 7 Resistant for months Luran S 757 R; BASF
50 0]365 7 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
Sodium Hypochlorite 12% chlorine 20 0]365 9 Resistant for years "
" 50 0]365 7 Resistant for months "
Sodium m-Bisulfite 20 0]365 9 Resistant for years "
50 0]365 9 " "
163
50 20 0]365 9 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
164
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Sulfuric Acid (cont) 50 50 0]365 7 Resistant for months Luran S 757 R; BASF
50 50 0]365 7 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
concentrated 20 0]365 3 Resistant for hrs Luran S 757 R; BASF
" 20 0]365 3 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
" 50 0]365 3 " Luran S 757 R; BASF
" 50 0]365 3 " Luran S 757 R; BASF; Specimen: Uncolored, unstressed
Tannic Acid 20 0]365 9 Resistant for years "
50 0]365 9 " "
Tar and Bug Remover 25 7 7 Tensile strength retained is at yield 85 Geloy 1120; GE Plastics
25 7 6 " 83 "
25 7 6 " 82 "
Tartaric Acid 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 9 " "
Tea instant 20 0]365 9 " "
moist leaves 20 0]365 9 " "
instant 50 0]365 9 " "
moist leaves 50 0]365 7 Resistant for months "
tert-Sodium Phosphate 20 0]365 9 Resistant for years "
50 0]365 9 " "
Tetrachloroethane 20 0]365 3 Resistant for hrs "
50 0]365 0 Dissolved "
Tetrachloroethene 20 0]365 5 Resistant for weeks "
50 0]365 4 Resistant for days "
Tetrahydrofuran 20 0]365 0 Dissolved "
50 0]365 0 " "
165
Trypaflavin 20 0]365 9 Resistant for years "
166
%
Conc. Temp. Time PDL Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Tensile
strength
Turpentine 20 0]365 5 Resistant for weeks Luran S 757 R; BASF; Specimen: Uncolored, unstressed
substitute 20 0]365 9 Resistant for years "
20 0]365 5 Resistant for weeks Luran S 757 R; Specimen: Uncolored, unstressed
substitute 20 0]365 9 Resistant for years "
50 0]365 4 Resistant for days Luran S 757 R; BASF; Specimen: Uncolored, unstressed
substitute 50 0]365 5 Resistant for weeks "
50 0]365 4 Resistant for days Luran S 757 R; Specimen: Uncolored, unstressed
substitute 50 0]365 5 Resistant for weeks "
Undecyl Alcohol 20 0]365 9 Resistant for years Luran S 757 R; BASF; Specimen: Uncolored, unstressed
50 0]365 7 Resistant for months "
Urea 20 0]365 9 Resistant for years "
50 0]365 9 " "
Urotropin 20 0]365 9 " "
50 0]365 9 " "
Valerian Drops 20 0]365 7 Resistant for months "
Verbena Oil 20 0]365 0 Dissolved "
Vinegar 20 0]365 9 Resistant for years "
50 0]365 7 Resistant for months "
Water 20 0]365 9 Resistant for years "
50 0]365 9 " "
Water Colors 20 0]365 9 " "
50 0]365 9 " "
Waxes bleached 20 0]365 9 " "
carnauba wax 20 0]365 9 " "
bleached 50 0]365 7 Resistant for months "
167
Part 3: Cellulosics Polymers
3. Cellulosics Polymers
Chapter Outline:
3.1 Cellulose Acetate
3.2 Cellulose Acetate Butyrate (CAB)
3.3 Cellulose Propionate
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Acetic Acid 5 23 365 2 Soft; surface attack; generally unsatisfactory 5.53 Eastman
5 23 365 2 " 5.53 Eastman; Specimen: Injection
molded, dry
10 23 7 2 " 5.44 Eastman
10 23 7 2 " 5.44 Eastman; Specimen: Injection
molded, dry
30 23 7 2 Soft; generally unsatisfactory 17.03 Eastman
30 23 7 2 " 17.03 Eastman; Specimen: Injection
molded, dry
Acetone 23 0 Dissolved; generally unsatisfactory "
Aircraft Fuels 100 octane 23 365 5 Slightly stained 24.41 "
Aluminum Acetate basic 33 23 60 5 Appearance unchanged 3.97 "
Aluminum Chloride 10 23 60 5 " 3.25 "
saturated solution 23 60 9 " 0.34 "
Aluminum Potassium Sulfate 21 38 120 4 Slight surface attack 3.89 "
Aluminum Sulfate 30 23 90 6 Appearance unchanged 2.95 "
Ammonium Bifluoride saturated 23 60 5 Slightly bleached 3.56 "
Ammonium Chloride saturated solution 23 60 8 Appearance unchanged 1.43 "
" 23 60 8 " 1.43 Specimen: Injection molded, dry
Ammonium Hydroxide 10 23 30 4 2.99 Eastman; Specimen: Injection
molded, dry
10 23 30 2 Soft; surface attack; generally unsatisfactory 2.99 "
Ammonium Nitrate 10 23 7 6 Appearance unchanged 2.91 "
solid 23 7 9 " 0.14 "
Ammonium Sulfate 10 23 365 5 " 3.68 "
169
170
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Carbon Bisulfide saturated 23 2 5 Appearance unchanged 5.85 Eastman; Specimen: Injection
molded, dry
23 30 7 " 0.59 "
Carbon Tetrachloride 23 60 3 Appearance unchanged; generally 14.92 "
unsatisfactory
Carboseal gas antileak compound 38 60 1 Swelled; soft; stained; generally 26.6 "
unsatisfactory
Catsup 23 7 7 Slightly stained "
Caulking Compound average of five brands 60 7 7 Appearance unchanged 22.68 "
Cellosolve Ektasolve EE 23 2 1 Soft; swollen; generally unsatisfactory 23.1 "
Cellosolve Acetate Ektasolve EE Acetate 23 2 3 Surface attack; generally unsatisfactory "
Chlordane 20 23 3 5 Appearance unchanged 1.83 "
Chlorine dry 23 7 3 Crazed; brittle; generally unsatisfactory 3.58 "
moist 23 7 4 " 2.96 "
saturated 23 7 2 Soft; swollen; generally unsatisfactory "
Chlorobenzene 23 0 Dissolved; generally unsatisfactory "
Chlorobromoethane 23 0 " "
Chloroform 23 0 " "
Chocolate Syrup Hershey 23 7 7 Appearance unchanged 1.67 "
Chromic Acid 6 38 8 2 Soft; swollen; generally unsatisfactory "
Citric Acid 10 23 365 6 Appearance unchanged 2.83 "
10 60 60 0 Decomposed; generally unsatisfactory "
30 60 7 0 " "
Citronella 23 2 8 Appearance unchanged 0.56 "
Clorox Chlorox solution 23 2 3 Soft; generally unsatisfactory "
Cloves 23 0 Dissolved; generally unsatisfactory "
Coca Cola Syrup concentrated 23 365 7 Slightly stained 0.32 "
Coffee grounds 23 3 9 Appearance unchanged "
iced 23 7 6 Stained 1.87 "
Copper Sulfate 10 23 60 5 Appearance unchanged 3.5 "
saturated 23 60 5 " 3.07 "
Cellulose Acetate
Creosote 23 240 6 " 22.69 "
Crude Oils sour crude 23 365 5 Slightly stained 23.2 "
Cuprous Chloride saturated 23 7 5 Appearance unchanged 2.28 "
Cyclohexanone 23 0 Dissolved; generally unsatisfactory "
DDT solid 23 7 9 Appearance unchanged 0.17 "
Cellulose Acetate
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Detergents dreft 5 23 60 7 Appearance unchanged 0.93 Eastman; Specimen: Injection
molded, dry
" 5 23 60 7 " 0.93 Specimen: Injection molded, dry
Glim 10 23 60 6 " 1.99 Eastman; Specimen: Injection
molded, dry
" 10 23 60 6 " 1.99 Specimen: Injection molded, dry
Diacetone 23 0 Dissolved; generally unsatisfactory Eastman; Specimen: Injection
molded, dry
1,2-Dichlorobenzene 23 3 2 Slightly swollen; generally unsatisfactory 9.8 "
1,4-Dichlorobenzene 23 3 7 Appearance unchanged 2.24 "
38 3 2 Plasticizer exudation; generally 6.57 "
unsatisfactory
1,2-Dichloroethane 23 0 Dissolved; generally unsatisfactory "
Diethyl Ether 23 2 3 Swelled; blushed; generally unsatisfactory 1.38 "
Diethylene Glycol 23 120 1 Soft; warped; surface attack; generally 20.78 "
unsatisfactory
Diisopropyl Ketone 23 2 9 Appearance unchanged 0.04 "
1,4-Dioxane 23 0 Dissolved; generally unsatisfactory "
Dishwashing Detergents Joy liquid 10 23 60 7 Appearance unchanged 20.32 "
" 23 60 2 Slightly warped; swollen; generally 23.27 "
unsatisfactory
Ektasolve DB butyl carbitol 23 2 5 Slight surface attack; generally 1.02 "
unsatisfactory
Ektasolve DE carbitol 23 2 1 Swelled; surface attack; generally 11.2 "
unsatisfactory
Ektasolve DM methyl carbitol 23 0 Dissolved; generally unsatisfactory "
Ektasolve EB Butyl Cellosolve 23 2 4 Slight surface attack; generally 1.95 "
unsatisfactory
Ektasolve EE Cellosolve 23 2 1 Soft; swollen; generally unsatisfactory 23.1 "
Ektasolve EE Acetate cellosolve acetate 23 2 3 Surface attack; generally unsatisfactory "
Ektasolve EM methyl cellosolve 23 0 Dissolved; generally unsatisfactory "
Ethyl Acetate 23 2 0 " "
Ethyl Alcohol 50 23 7 2 Soft; swollen; generally unsatisfactory 14.48 Eastman
50 23 7 2 " 14.48 Eastman; Specimen: Injection
molded, dry
23 2 1 " 12.7 Eastman
23 2 1 " 12.7 Eastman; Specimen: Injection
molded, dry
171
Ethyl Lactate 23 2 0 Dissolved; generally unsatisfactory "
172
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Ethylene Glycol 23 365 5 Slightly softened 1.29 Eastman; Specimen: Injection
molded, dry
Ethylene Oxide 23 1 1 Soft; swollen; generally unsatisfactory 18.54 "
gas 23 1 1 " 18.54 "
2-Ethylhexyl Alcohol 2-ethylhexanol 23 7 9 Appearance unchanged "
Eucalyptus Oil 23 2 9 " 0.28 "
Eugenol 23 0 Dissolved; generally unsatisfactory "
Ferric Chloride 5 23 60 5 Appearance unchanged 2.93 "
20 23 60 6 " 2.5 "
40 23 60 7 " 2.81 "
saturated 23 7 3 Surface tacky; generally unsatisfactory "
Floor Cleaners 23 7 5 Soft; generally unsatisfactory 1 "
Formaldehyde 35 23 7 3 Soft; swollen; generally unsatisfactory 11.82 "
Formic Acid 3 23 20 9 Appearance unchanged "
Freon 11 monofluorotrichloromethane, Frigen 23 0.083 4 Showed exudation "
11
" 23 0.083 4 " Specimen: Injection molded, dry
Freon 114 tetrafluorodichloroethane, Frigen 114; 23 30 9 Appearance unchanged 0.38 Eastman; Specimen: Injection
gas molded, dry
tetrafluorodichloroethane, Frigen 114; 23 30 8 " 0.55 "
liquid
Freon 12 difluorodichloromethane, Frigen 12; 23 30 9 " 0.32 "
gas
difluorodichloromethane, Frigen 12; 23 30 6 " 23.37 "
liquid
difluorodichloromethane, Frigen 12; 23 30 9 " 0.32 Specimen: Injection molded, dry
gas
difluorodichloromethane, Frigen 12; 23 30 6 " 23.37 "
liquid
Freon 22 gas 23 30 7 " 2.68 Eastman; Specimen: Injection
molded, dry
difluoromonochloromethane, Frigen 23 0 Dissolved; generally unsatisfactory "
22; liquid
Gasoline Amoco premium 23 365 7 Appearance unchanged 22.92 "
Cellulose Acetate
Amoco regular 23 365 6 Stained yellow 22.8 "
Shell premium 23 365 6 " 22.29 "
Shell regular 23 365 7 " 21.9 "
Glycerin 23 365 9 Appearance unchanged 20.66 "
Cellulose Acetate
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Grape Juice 23 7 6 Appearance unchanged 2.25 Eastman; Specimen: Injection
molded, dry
Hair Tonic Vitalis 23 3 2 Swelled; generally unsatisfactory "
Horseradish 23 3 9 Appearance unchanged "
Household Cleaners Lysol 23 365 2 Soft; generally unsatisfactory "
Hydraulic Fluids Skydrol 23 365 8 Appearance unchanged 21.07 "
Skydrol 500 23 365 7 Surface dulled 1.15 "
Hydrochloric Acid 6 23 2 8 Appearance unchanged 1.28 Eastman
6 23 2 8 " 1.28 Eastman; Specimen: Injection
molded, dry
8 23 2 5 Soft; generally unsatisfactory 0.08 Eastman
8 23 2 5 " 0.08 Eastman; Specimen: Injection
molded, dry
10 23 30 3 Soft; swollen; generally unsatisfactory 2.06 Eastman
10 23 30 3 " 2.06 Eastman; Specimen: Injection
molded, dry
Hydrofluoric Acid 10 23 30 2 " "
48 23 30 0 Decomposed; generally unsatisfactory "
Hydrofluorosilicic Acid 10 23 60 5 Slight warp; generally unsatisfactory 21.3 "
28 23 60 5 " 21.67 "
Hydrogen Peroxide 3 23 365 3 Soft; bleached; generally unsatisfactory 4.46 "
5 23 2 5 Slightly bleached 3.1 "
Hydrogen Sulfide dry 23 30 7 Appearance unchanged 1.05 "
moist 23 60 5 " 3.95 "
saturated 23 60 6 " 1.58 "
Hydroquinone 20 grams/gal. 23 7 3 Stained yellow; generally unsatisfactory 5.58 "
Inks Dwin 23 7 9 Appearance unchanged 20.02 "
Insecticides Mortemoth Liquid 23 60 7 " 1.69 "
Iodine saturated 23 2 5 Stained brown; generally unsatisfactory 2.48 "
Isoamyl Acetate 23 2 5 Surface attack; generally unsatisfactory 1.89 "
Isoamyl Alcohol 23 2 9 Appearance unchanged 20.36 "
Isobutyl Acetate 23 2 2 Surface attack; generally unsatisfactory 7.82 "
Isobutyl Alcohol 23 2 7 Appearance unchanged 21.7 "
Isopropyl Acetate 23 2 2 Surface attack; generally unsatisfactory 7.32 "
Isopropyl Alcohol isopropanol 23 2 1 Swelled; generally unsatisfactory 10.9 "
Isopropyl Ether 23 2 5 Appearance unchanged; generally 29.31 "
173
unsatisfactory
174
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Jet Aircraft Fuels JP 3 23 365 5 Appearance unchanged 26 Eastman; Specimen: Injection
molded, dry
Kerosene 23 7 7 " 20.84 "
Lactic Acid 10 23 2 6 " 3.14 "
50 23 2 2 Soft; surface attack; generally unsatisfactory 6.8 "
Latex latex emulsion 23 365 5 Appearance unchanged 26 "
Laundry Detergents Tide 5 23 60 7 Slightly warped 0.08 "
Lemon Juice 23 7 4 Appearance unchanged 4.3 "
Lemon Oil 23 2 9 " 0.26 "
Lemonade 23 7 6 " 2.47 "
Lubricating Oils Shell Diala Oil AX 23 60 7 " 21.72 "
Aeroshell No. 12 23 365 5 " 25.95 "
Texaco #50; low temperature 50 28 5 21.92 "
Magnesium Chloride solid 23 2 6 Appearance unchanged 2.93 "
Magnesium Sulfate " 23 2 5 " 3.12 "
Margarine 23 3 9 " "
Mayonnaise 23 3 9 " "
Menthol Oil in n-butanol 50 23 2 9 " 0.04 "
Mercuric Chloride 5 23 2 5 " 5.86 "
Mercurochrome 23 2 5 Stained 3.26 "
Mercury ammoniated 60 7 9 Appearance unchanged "
Methyl Acetate 23 0 Dissolved; generally unsatisfactory "
Methyl Alcohol 5 23 365 3 3.98 "
5 23 365 3 Soft; blushed; generally unsatisfactory 3.98 "
23 2 1 22.6 "
23 2 1 Soft; swollen; blushed; generally 22.6 "
unsatisfactory
Methyl Butyl Ketone 23 2 1 Swelled; surface attack; generally 13.4 "
unsatisfactory
Methyl Carbitol Ektasolve DM 23 0 Dissolved; generally unsatisfactory "
Methyl Cellosolve Ektasolve EM 23 0 " "
Cellulose Acetate
Methyl Cellosolve Acetate 23 0 " "
Methyl Ethyl Ketone 23 0 " "
Methyl Isobutyl Ketone 23 2 1 Swelled; surface attack; generally 40.4 "
unsatisfactory
23 2 1 " 40.4 Specimen: Injection molded, dry
Cellulose Acetate
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Methyl Propyl Ketone 23 2 1 Swelled; surface attack; warp; generally 51.3 Eastman; Specimen: Injection
unsatisfactory molded, dry
Methyl Salicylate 23 2 4 Slight surface attack 2.74 "
Methylene Chloride 23 0 Dissolved; generally unsatisfactory "
Milk 23 3 9 Appearance unchanged "
Mineral Oils 23 120 6 " 22.18 "
Mineral Spirits 23 10 5 " 26.5 "
Moth Balls naphthalene 38 2 4 Plasticizer exudation; generally 1.01 "
unsatisfactory
" 60 1 3 " 8.58 "
Motor Oils Socony DTE heavy 23 3 9 Appearance unchanged 20.08 "
Purol HD, SAE 10 23 180 9 " 20.31 "
Mustard 23 2 5 Stained 2.78 "
Naphtha industrial 23 30 6 Appearance unchanged 23.24 "
" 23 30 6 " 23.24 Specimen: Injection molded, dry
Naphthalene moth balls 38 2 4 Plasticizer exudation; generally 1.01 Eastman; Specimen: Injection
unsatisfactory molded, dry
" 60 1 3 " 8.58 "
n-Heptane 23 365 5 Appearance unchanged 25.36 "
Nitric Acid 10 23 7 0 Decomposed; generally unsatisfactory "
Nitrobenzene 23 3 2 Soft; swollen; warped; generally "
unsatisfactory
Oleic Acid 23 365 6 Appearance unchanged 23.33 "
Orange Juice 23 7 6 " 2.5 "
Paint Removers Taxite paint and varnish remover 23 1 2 Swelled; partially dissolved "
Paints oil base 23 7 7 Appearance unchanged 21.52 "
water emulsion 23 7 5 " 3.31 "
Palmarosa Oil 23 2 8 " 0.98 "
Peanut Butter 23 3 9 " "
Pennyroyal 23 2 7 " 1.03 "
Phenol 5 23 7 0 Decomposed; generally unsatisfactory "
Phorone 23 2 8 Stained yellow 0.04 "
Phosphoric Acid 0.5 23 60 4 Brittle; surface attack; generally 1.63 "
unsatisfactory
30 23 60 5 Appearance unchanged; generally 2.03 "
unsatisfactory
175
75 23 7 0 Decomposed; generally unsatisfactory "
176
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Photographic Developers Kodak D-72 23 7 3 Slightly softened; generally unsatisfactory 3.43 Eastman; Specimen: Injection
molded, dry
Kodak DK-50 23 7 4 Stained 4.58 "
Photographic Fixing Baths photographic acid fixer 23 7 5 Appearance unchanged 4.46 "
Potassium Chloride 10 23 365 6 " 3.29 "
solid 23 365 9 " 0.02 "
Potassium Cyanide 10 23 60 2 Soft; discolored; generally unsatisfactory 25.84 "
saturated 23 60 4 " 21.15 "
Potassium Iodide " 23 3 6 Stained yellow "
Potassium Permanganate " 23 2 5 Stained black 3.27 "
Potassium Sulfate 10 23 365 6 Appearance unchanged 2.6 "
solid 23 365 9 " 0.08 "
Propane liquid 23 30 6 " 23.88 "
gas 23 60 8 " 20.76 "
Propyl Alcohol n-propyl alcohol 23 2 3 Blushed; generally unsatisfactory 2.2 "
Propylene Dichloride 23 2 2 Blistered; generally unsatisfactory 25.3 "
Propylene Glycol 23 2 9 Appearance unchanged 0.39 "
Pyranol transformer oil 90 7 6 " 23.58 "
Pyrogallic Acid 4 23 7 3 Stained yellow 7.88 "
Quinine 49 2 9 Appearance unchanged "
sec-Butyl Acetate 23 2 3 Surface attack; generally unsatisfactory 3.74 "
sec-Butyl Alcohol 23 2 7 Surface bleached 0.36 "
sec-Tetrabromoethane 23 3 3 Slightly swollen; generally unsatisfactory 5.36 "
Shaving Cream Mennen 23 2 9 Appearance unchanged "
Shoe Polish Kusan 23 3 8 Stained 0.15 "
Silver Nitrate 3 23 2 6 Slightly softened 1.97 "
Skydrol hydraulic fluid 23 365 8 Appearance unchanged 21.07 "
Skydrol 500 Monsanto; hydraulic fluid 23 365 7 Surface dulled 1.15 "
Soaps 10 88 1 "
10 88 1 Specimen: Injection molded, dry
Sodium Bicarbonate solid 23 2 6 Appearance unchanged 2.96 Eastman; Specimen: Injection
Cellulose Acetate
molded, dry
Sodium Bisulfite 20 23 7 5 " 4.03 "
Sodium Borate 2.5 23 2 6 " 2.88 "
Sodium Carbonate 2.5 23 365 3 Slightly softened 28.74 "
2.5 23 365 3 " 28.74 Specimen: Injection molded, dry
Cellulose Acetate
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Sodium Carbonate (cont) solid 23 4 9 Appearance unchanged 20.1 Eastman; Specimen: Injection
molded, dry
" 23 4 9 " 20.1 Specimen: Injection molded, dry
Sodium Chloride 10 23 365 6 " 2.52 Eastman; Specimen: Injection
molded, dry
saturated 23 60 7 " 1.26 "
" 60 60 7 " 1.03 "
Sodium Cyanide 10 23 60 2 Soft; discolored; generally unsatisfactory 24.2 "
saturated 23 60 4 " 20.84 "
Sodium Ferrocyanide dry crystals 23 7 9 Appearance unchanged 0.37 "
Sodium Fluoride 4 23 30 6 " 3.6 "
Sodium Hydroxide 1 23 30 5 Soft; warped; generally unsatisfactory 21.94 Eastman
1 23 30 5 " 21.94 Eastman; Specimen: Injection
molded, dry
10 23 7 0 Decomposed; generally unsatisfactory Eastman
10 23 7 0 " Eastman; Specimen: Injection
molded, dry
Sodium Hypochlorite 5 23 2 5 Soft; surface attack; generally unsatisfactory 0.85 "
Sodium Nitrate 10 23 365 6 Appearance unchanged 2.58 "
saturated 23 60 7 " 1.48 "
solid 23 60 9 " 20.26 "
Sodium Nitrite saturated 23 60 8 " 0.78 "
solid 23 60 9 " 20.42 "
Sodium Silicate saturated 23 60 4 Soft; generally unsatisfactory 20.34 "
solid 23 60 6 Etched; generally unsatisfactory 0.57 "
Spearmint spearmint oil 23 7 9 Appearance unchanged "
Sperm Oil 90 7 3 Slightly warped 24.03 "
Stearic Acid 23 7 9 Appearance unchanged "
Stoddard Solvents white spirits 23 3 9 " 20.05 "
Sulfur Dioxide dry 23 60 1 Swelled; warped; generally unsatisfactory 17.3 "
moist 23 60 1 " 13.5 "
saturated 23 60 1 " 10.6 "
Sulfuric Acid 3 23 30 3 Soft; generally unsatisfactory 3.04 Eastman
3 23 30 3 " 3.04 Eastman; Specimen: Injection
molded, dry
10 23 365 0 Decomposed; generally unsatisfactory Eastman
177
178
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Sulfuric Acid (cont) 10 23 365 0 Decomposed; generally unsatisfactory Eastman; Specimen: Injection
molded, dry
20 23 240 0 " Eastman
20 23 240 0 " Eastman; Specimen: Injection
molded, dry
Tannic Acid 10 60 120 3 Soft; generally unsatisfactory 7.62 "
Tartaric Acid 23 2 6 Appearance unchanged 2.93 "
Tea iced 23 7 6 " 1.98 "
Terpineol 23 2 9 " 0.06 "
tert-Amyl Alcohol 23 2 9 " 20.17 "
tert-Butyl Alcohol 23 2 7 " 22 "
Tetra-(2-Ethylbutyl) Silicate 50 30 6 " 22.39 "
Tetrachloroethane 23 0 Dissolved; generally unsatisfactory "
Tetrachloroethene 23 14 9 Appearance unchanged "
Tetrahydrofurfuryl 23 3 4 Soft; swollen "
Thyme Oil white 23 2 9 Appearance unchanged 0.37 "
Titanium Tetrachloride 23 3 2 Very brittle; generally unsatisfactory "
Toluene 23 365 2 Swelled; soft; generally unsatisfactory 21.72 Eastman
23 365 2 " 21.72 Eastman; Specimen: Injection
molded, dry
Tomato Juice 23 7 6 Appearance unchanged 2.06 "
Toothpaste Lever 38 4 7 " 0.97 "
Transformer Oils GE#10-C 82 7 7 " 22.94 "
Pyranol 90 7 6 " 23.58 "
Trichloroacetic Acid 23 30 0 Decomposed; generally unsatisfactory "
Trichloroethene 23 0.67 2 Surface attack; generally unsatisfactory 32.2 Eastman
23 0.67 2 " 32.2 Eastman; Specimen: Injection
molded, dry
Triethanolamine 10 7 4 Soft; surface attack; generally unsatisfactory 25.16 "
10 7 4 " 25.16 Specimen: Injection molded, dry
23 7 2 Soft; generally unsatisfactory 11.72 Eastman; Specimen: Injection
molded, dry
Cellulose Acetate
23 7 2 " 11.72 Specimen: Injection molded, dry
Triethylene Glycol 23 120 1 Soft; warped; surface attack; generally 25.4 Eastman; Specimen: Injection
unsatisfactory molded, dry
Trimethylbenzylammonium 5 23 17 6 Appearance unchanged 0.59 "
Chloride
Cellulose Acetate Butyrate (CAB)
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Trimethylbenzylammonium 5 23 17 2 Swelled; checked; generally unsatisfactory 24.87 Eastman; Specimen: Injection
Hydroxide molded, dry
Turpentine 23 365 8 Appearance unchanged 20.85 "
23 365 8 " 20.85 Specimen: Injection molded, dry
Varsol 2 solvent 23 7 7 " 21.6 Eastman; Specimen: Injection
molded, dry
Water 23 365 5 " 3.09 "
Weed Killer Weed-B-Gon 23 30 5 Appearance unchanged; generally 1.9 "
unsatisfactory
End-O-Weed 23 60 5 Slightly softened; generally unsatisfactory 2.8 "
Xylene 23 365 5 Appearance unchanged 25.64 "
Zinc Chloride hydrous salt 23 7 8 " 0.88 "
saturated solution 23 7 0 Dissolved; generally unsatisfactory "
hydrous salt 23 7 8 Appearance unchanged 0.88 Specimen: Injection molded, dry
saturated solution 23 7 0 Dissolved; generally unsatisfactory "
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Accelerated Outdoor EMMAQUA-Arizona, specimens 365 2 Data from Aristech literature Uvex; Eastman; Specimen: 3.2 mm (0.125 in)
Weathering track sun, 1 yr. = 4 yrs. normal nominal caliper, extruded
exposure
Accelerated Weathering carbon arc Weather-Ometer 125 2 Retains 82% of light 8.2 "
transmission; data from
Aristech literature
Acetic Acid 5 23 365 4 Slightly softened 3.59 Tenite Butyrate; Eastman
5 23 365 4 " 3.59 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
10 23 60 3 " 5.22 Tenite Butyrate; Eastman
10 23 60 3 " 5.22 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
30 23 60 1 Soft; swollen; generally 12.6 Tenite Butyrate; Eastman
unsatisfactory
179
180
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Acetic Acid (cont) 30 23 60 1 Soft; swollen; generally 12.6 Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
Acetone 23 0 Dissolved; generally "
unsatisfactory
Aircraft Fuels 100 octane 23 365 4 Slight discoloring 3.03 "
Aircraft Turbine Oils Aeroshell No. 300 49 3 "
Aluminum Acetate 33 23 60 7 Appearance unchanged 1.83 "
Aluminum Chloride 10 23 60 7 " 1.48 "
saturated solution 23 60 9 " 0.1 "
Aluminum Potassium 21 38 120 7 " 1.94 "
Sulfate
Aluminum Sodium Sulfate solid 23 7 7 " 1.64 "
Aluminum Sulfate " 23 90 6 " 1.68 "
Ammonium Bifluoride saturated 23 30 5 Slightly bleached 2.34 "
Ammonium Chloride saturated solution 23 30 6 Appearance unchanged 2.11 "
" 23 30 6 " 2.11 Tenite Butyrate; Specimen: Injection molded, dry
Ammonium Hydroxide 10 23 60 1 21.87 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
10 23 60 2 Soft; generally unsatisfactory 21.87 "
Ammonium Nitrate 10 23 7 7 Appearance unchanged 1.65 "
solid 23 7 9 " 0.16 "
Ammonium Sulfate 10 23 365 7 " 1.3 "
solid 23 365 9 " 0.11 "
Amyl Alcohol n-amyl alcohol 23 2 5 " 3.06 "
" 23 2 5 " 3.06 Tenite Butyrate; Specimen: Injection molded, dry
Aniline 23 0 Dissolved; generally Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
181
182
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Chlorobromoethane 23 0 Dissolved; generally Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
Chloroform 23 0 " "
Chocolate Syrup Hershey 23 7 8 Appearance unchanged 1.3 "
Chromic Acid 6 38 8 7 Slightly stained 2 "
Citric Acid 10 23 365 7 Appearance unchanged 1.38 "
10 60 120 5 Slightly softened 1.64 "
60 60 120 3 Surface attack; generally "
unsatisfactory
Citronella 23 2 2 Slightly softened; generally 6.1 "
unsatisfactory
Cleaners Bon Ami; saturated 23 2 8 Appearance unchanged 1.42 "
Clorox Chlorox solution 23 42 9 " "
Coca Cola Syrup concentrated 23 365 5 Stained yellow 1.69 "
Coffee grounds 23 3 9 Appearance unchanged "
iced 23 7 6 Stained 1.46 "
Cologne sticks 23 0 Dissolved; generally "
unsatisfactory
Cooking Oils Wesson, all vegetable 23 7 7 Appearance unchanged 0.19 "
Copper Sulfate 10 23 60 7 " 1.67 "
saturated 23 60 7 " 1.68 "
Creosote 23 365 2 Soft; generally unsatisfactory 11.65 "
Crude Oils sour crude 23 180 4 Appearance unchanged 6.4 "
Cuprous Chloride saturated 23 7 7 " 1.5 "
Cyclohexanone 23 0 Dissolved; generally "
unsatisfactory
Decongestant Vicks 50 2 2 Swelled; stained; generally "
183
184
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Ethylene Oxide 23 1 1 Swelled; soft; generally 20.85 Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
gas 23 1 1 " 20.85 "
41 0.007 9 Appearance unchanged "
gas 41 0.007 9 " "
2-Ethylhexyl Alcohol 2-ethylhexanol 23 7 2 Swelled; generally "
unsatisfactory
Eucalyptus Oil 23 2 5 Slightly softened; generally 0.45 "
unsatisfactory
Ferric Ammonium Sulfate solid 38 7 9 Appearance unchanged 0.25 "
Ferric Chloride 5 23 60 7 " 2 "
20 23 60 7 " 1.73 "
40 23 60 8 " 1.34 "
saturated 23 30 8 " 0.88 "
Fertilizers 20% disokdium phosphate 38 3 6 Stained yellow "
Floor Cleaners Stanley 23 7 8 Appearance unchanged 1.8 "
Formaldehyde 4 23 0.035 9 " 0.24 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry, exposed 5 min per day for 5 days
35 23 60 1 Swelled; soft; generally 12.98 Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
Formic Acid 3 23 20 9 Appearance unchanged "
Freon 114 tetrafluorodichloroethane, Frigen 23 30 8 " 0.84 "
114; gas
tetrafluorodichloroethane, Frigen 23 30 4 " 7.76 "
114; liquid
Freon 12 difluorodichloromethane, Frigen 23 30 8 " 0.88 "
12; gas
difluorodichloromethane, Frigen 23 30 2 Slightly swollen; generally 18.75 "
185
Sheaffer's Skrip 23 30 5 " 4.09 "
186
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Insecticides Mortemoth Liquid 23 7 1 Soft; swollen; generally 26.45 Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
Isoamyl Acetate 23 0 Dissolved; generally "
unsatisfactory
Isoamyl Alcohol 23 2 3 Slightly softened; generally 2.02 "
unsatisfactory
Isobutyl Acetate 23 0 Dissolved; generally "
unsatisfactory
Isopropyl Acetate 23 0 " "
Isopropyl Alcohol isopropanol 23 2 1 Soft; tacky; generally 23.4 "
unsatisfactory
Isopropyl Ether 23 2 7 Appearance unchanged 0.78 "
Jet Aircraft Fuels JP 3 23 240 5 " 3.87 "
Kerosene 23 7 8 " 0.41 "
Lactic Acid 50 23 2 7 " 1.6 "
Latex latex emulsion 23 365 8 " 1.11 "
Laundry Detergents Tide 5 23 60 8 " 1.58 "
Wisk 23 365 6 Discolored 1.1 "
Lavender 23 2 8 Appearance unchanged 0.89 "
Lemon Juice 23 2 7 " 2.4 "
Lemon Oil 23 2 9 " 0.41 "
Linseed Oil 23 30 9 " "
Lipstick Coty 23 42 6 Stained "
Lithium Bromide 50 23 7 9 Appearance unchanged 20.04 "
solid 23 7 9 " 20.68 "
Lubricating Oils Houghton Safe 112 23 7 7 " ,1 "
Shell Diala Oil AX 23 60 9 " 20.08 "
187
188
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Outdoor Weathering Arizona, 45 south 182 6 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick clear or colored outdoor type
Tenite Butyrate
" 182 8 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick of a black outdoor type Tenite
Butyrate
Tennessee, vertical position facing 182 2 59 Tenite Butyrate; Eastman; Specimen: 3.2 mm
due south (0.125 in) thick clear or colored outdoor type
Tenite Butyrate
" 182 9 97 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick of a black outdoor type Tenite
Butyrate
Arizona, 45 south 365 3 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick clear or colored outdoor type
Tenite Butyrate
" 365 7 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick of a black outdoor type Tenite
Butyrate
Tennessee, vertical position facing 365 1 40 Tenite Butyrate; Eastman; Specimen: 3.2 mm
due south (0.125 in) thick clear or colored outdoor type
Tenite Butyrate
" 365 9 95 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick of a black outdoor type Tenite
Butyrate
Arizona, 45 south 730 3 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick clear or colored outdoor type
Tenite Butyrate
" 730 6 Tenite Butyrate; Eastman; Specimen: 3.2 mm
(0.125 in) thick of a black outdoor type Tenite
Butyrate
Florence, Kentucky; 45 degrees 730 3 Data from Aristech literature Uvex; Eastman; Specimen: 3.2 mm (0.125 in)
south nominal caliper, extruded
189
190
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Propyl Acetate n-propyl acetate 50 0 Dissolved; generally Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
Propyl Alcohol n-propyl alcohol 23 2 2 Slightly softened; generally 15 "
unsatisfactory
Propylene Dichloride 23 0 Dissolved; generally "
unsatisfactory
Propylene Glycol 23 2 9 Appearance unchanged 0.44 "
Pyranol transformer oil 90 7 8 " 20.74 "
Pyrogallic Acid 4 23 7 5 Stained yellow 2.56 "
sec-Butyl Acetate 23 0 Dissolved; generally "
unsatisfactory
sec-Butyl Alcohol 23 2 1 Swelled; generally 7.2 "
unsatisfactory
sec-Tetrabromoethane 23 3 2 Soft; swollen; tacky; generally "
unsatisfactory
Silicone Oil Dow Corning # 200 23 90 8 Appearance unchanged 0.77 "
Silver Nitrate 2.5 23 2 7 " 1.46 "
Skydrol hydraulic fluid 23 0 Dissolved; generally "
unsatisfactory
Skydrol 500 Monsanto; hydraulic fluid 23 0 " "
Sodium Acetate 3 38 3 7 Appearance unchanged 1.3 "
Sodium Bicarbonate 2.5 23 2 7 " 1.68 "
Sodium Bisulfate 1 38 3 7 " 1.25 "
solid 38 7 9 " 0.1 "
Sodium Bisulfite 20 23 7 6 " 2.14 "
Sodium Borate 2.5 23 2 7 " 1.53 "
Sodium Carbonate 2.5 23 365 7 " 1.28 "
191
Sulfur solid 23 7 9 Appearance unchanged "
192
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Sulfur Dioxide dry 23 60 1 Swelled; warped; generally 19.4 Tenite Butyrate; Eastman; Specimen: Injection
unsatisfactory molded, dry
moist 23 60 1 " 31.9 "
saturated 23 60 1 " 23.2 "
Sulfuric Acid 3 23 365 6 Slight discoloring 1.6 Tenite Butyrate; Eastman
3 23 365 6 " 1.6 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
10 23 365 7 " 1.5 Tenite Butyrate; Eastman
10 23 365 7 " 1.5 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
20 23 365 5 Soft; surface attack; generally 0.91 Tenite Butyrate; Eastman
unsatisfactory
20 23 365 5 " 0.91 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
30 365 6 Surface attack; generally 20.42 Tenite Butyrate; Eastman
unsatisfactory
30 365 6 " 20.42 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
94 23 0 Disintegrated; generally Tenite Butyrate; Eastman
unsatisfactory
94 23 0 " Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
Talcum Powder 23 3 5 Appearance unchanged 2.93 "
Tannic Acid 10 38 120 6 " 2.75 "
Tea iced 23 7 7 " 1.5 "
Terpineol 23 2 8 " 0.56 "
tert-Amyl Alcohol 23 2 1 Soft; tacky; generally 14 "
unsatisfactory
193
Xylene 23 7 2 Soft; generally unsatisfactory 41.52 "
194
% %
Conc. Temp. Time PDL Change Retained
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) # Impact
Weight
strength
Zinc Chloride hydrous salt 23 7 8 Appearance unchanged 0.53 Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
saturated solution 23 7 6 Slightly etched 1.37 "
hydrous salt 23 7 8 Appearance unchanged 0.53 Tenite Butyrate; Specimen: Injection molded, dry
saturated solution 23 7 6 Slightly etched 1.37 "
Zinc Oxide solid 23 7 9 Appearance unchanged Tenite Butyrate; Eastman; Specimen: Injection
molded, dry
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Cellulose Propionate
Crude Oils 23 365 9 " "
Decongestant Vicks 50 2 3 Stained; soft; generally unsatisfactory "
Ektasolve EE Acetate cellosolve acetate 23 0 Dissolved; generally unsatisfactory "
Ethyl Acetate 23 365 0 " "
Cellulose Propionate
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Ethyl Alcohol 50 23 365 2 Soft; swollen; generally unsatisfactory Eastman
50 23 365 2 " Eastman; Specimen: Injection molded,
dry
95 23 365 2 " Eastman
95 23 365 2 " Eastman; Specimen: Injection molded,
dry
Ethylene Glycol 23 365 9 Appearance unchanged "
Formaldehyde 35 23 365 2 Soft; swollen; generally unsatisfactory "
Gasoline Amoco premium 23 365 1 Swelled; wavy surface; generally unsatisfactory 6.28 "
Amoco regular 23 365 4 Yellowed 2.25 "
regular 23 365 4 Yellowed; generally unsatisfactory "
Shell premium 23 365 2 Pink; warped; generally unsatisfactory 4.81 "
Shell regular 23 365 3 Yelllowed; slightly warped; generally 3.58 "
unsatisfactory
Glycerin 23 365 9 Appearance unchanged "
Hydrochloric Acid 10 23 365 0 Disintegrated; generally unsatisfactory Eastman
10 23 365 0 " Eastman; Specimen: Injection molded,
dry
Hydrogen Peroxide 3 23 365 9 Appearance unchanged "
Inks Quick Dry Blue # 353 23 18 4 2.2 "
Lubricants Burndy's Penetrox A conductive 50 28 8 Appearance unchanged 20.9 "
lubricant
Lubricating Oils Bardahl 50 7 7 20.92 "
Texaco #50; low temperature 50 7 4 22.04 "
Bardahl 50 28 5 21.96 "
Texaco #50; low temperature 50 28 3 23.38 "
Malathion 0.5 23 7 1 Soft; swollen; surface pitted; generally 9.36 "
unsatisfactory
Methyl Alcohol 5 23 365 "
5 23 365 9 Appearance unchanged "
100 23 365 "
100 23 365 0 Dissolved; generally unsatisfactory "
Methyl Cellosolve 23 0 " "
Acetate
Methyl Ethyl Ketone 23 0 " "
Methyl Isoamyl Ketone 23 0 " "
195
196
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Motor Oils Purol HD SAE 10 23 60 9 Appearance unchanged 20.1 Eastman; Specimen: Injection molded,
dry
" 23 180 9 20.3 "
n-Heptane 23 365 9 Appearance unchanged "
Nitric Acid 23 365 0 Disintegrated; generally unsatisfactory "
Oleic Acid 23 365 9 Appearance unchanged "
Ozone 0.05-0.15 ppm 23 45 9 " "
0.7 ppm 49 45 9 " "
Phenol 5 23 365 0 Disintegrated; generally unsatisfactory "
Propane gas 23 365 9 Appearance unchanged "
liquid 23 365 9 " "
Radiator Sealant Dane Head 23 21 9 " "
Sachet Powder 50 30 9 " "
Soaps solution; USP 23 365 9 " "
" 23 365 9 " Specimen: Injection molded, dry
Sodium Carbonate 2.5 23 365 9 " Eastman; Specimen: Injection molded,
dry
2.5 23 365 9 " Specimen: Injection molded, dry
Sodium Chloride 10 23 365 9 " Eastman; Specimen: Injection molded,
dry
Sodium Ferrocyanide dry crystals 23 7 7 " 0.8 "
Sodium Hydroxide 1 23 365 9 " Eastman
1 23 365 9 " Eastman; Specimen: Injection molded,
dry
10 23 365 0 Disintegrated; generally unsatisfactory Eastman
10 23 365 0 " Eastman; Specimen: Injection molded,
dry
Sulfuric Acid 3 23 365 9 Appearance unchanged Eastman
3 23 365 9 " Eastman; Specimen: Injection molded,
dry
30 23 365 5 Slightly warped; generally unsatisfactory Eastman
Cellulose Propionate
30 23 365 5 " Eastman; Specimen: Injection molded,
dry
Toluene 23 365 2 Soft; swollen; generally unsatisfactory Eastman
23 365 2 " Eastman; Specimen: Injection molded,
dry
Cellulose Propionate
%
Conc. Temp. Time PDL Change
Exposure medium Exp. medium note Resistance note Material note
(%) (C) (days) #
Weight
Turpentine 23 365 9 Appearance unchanged Eastman; Specimen: Injection molded,
dry
23 365 9 " Specimen: Injection molded, dry
Vicks decongestant 50 2 3 Stained; soft; generally unsatisfactory Eastman; Specimen: Injection molded,
dry
Water 23 365 9 Appearance unchanged "
Xylene 23 365 2 Soft; swollen; generally unsatisfactory "
197
Part 4: Ionomers
4. Ionomers
Chapter Outline:
4.1 Ionomer
4.1 Ionomer
Trade name: Ethylene acid copolymers (Surlyns by DuPont Company)
199
200
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Ammonium 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
m-Phosphate greater than 20 mils
60 8 " "
Ammonium Nitrate 21 8 " "
60 8 " "
Ammonium Persulfate 21 8 " "
60 8 " "
Ammonium Phosphate 21 8 " "
60 8 " "
Ammonium Sulfate 21 8 " "
60 8 " "
Ammonium Sulfide 21 8 " "
60 8 " "
Ammonium 21 8 " "
Thiocyanate
60 8 " "
Amyl Acetate 21 2 Not recommended for any conditions; possible stress crack Specimen: Data for applications with material thickness greater
agent; plasticizer than 20 mils
21 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 " Specimen: Data for applications with material thickness greater
than 20 mils
60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Amyl Alcohol 21 4 Variable resistance - depends on use conditions; oxidizer; Specimen: Data for applications with material thickness greater
plasticizer than 20 mils
21 4 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 4 " Specimen: Data for applications with material thickness greater
than 20 mils
60 4 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Amyl Chloride 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Aniline 21 5 Resistant - no indication of impaired service; plasticizer "
60 2 Not recommended under any conditions; plasticizer "
Aniline Hydrochloride 21 2 " "
60 2 " "
Ionomer
Animal Oils lard oil 21 8 Resistant - no indication of impaired service "
" 60 8 " "
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Anthraquinone 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " "
Anthraquinonesulfonic 21 8 " "
Acid
60 8 " "
Antimony Trichloride 21 8 " "
60 8 " "
Aqua Regia 21 2 Not recommended under any conditions; oxidizer "
60 2 " "
Aromatic Hydrocarbons 21 5 Resistant - no indication of impaired service; plasticizer "
60 4 Variable resistance - depends on use conditions; plasticizer "
Arsenic Acid 21 8 Resistant - no indication of impaired service "
60 8 " "
Ascorbic Acid 10 21 8 " "
10 60 8 " "
Barium Carbonate 21 8 " "
60 8 " "
Barium Chloride 21 8 " "
60 8 " "
Barium Hydroxide 21 8 " "
60 8 " "
Barium Sulfate 21 8 " "
60 8 " "
Barium Sulfide 21 8 " "
60 8 " "
Beer 21 8 " "
60 8 " "
Beet Sugar Liquors 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 6 " "
Benzaldehyde 21 5 Variable resistance - depends on use conditions; possible "
stress crack agent
60 2 Not recommended under any conditions; possibble stress "
crack agent
Benzene 21 "
21 6 Resistant - no indication of impaired service; plasticizer "
60 "
201
60 5 Variable resistance - depends on use conditions; plasticizer "
202
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Benzenesulfonic Acid 10 21 6 Resistant - no indication of impaired service; plasticizer DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
10 60 6 " "
Benzoic Acid 21 8 Resistant - no indication of impaired service "
60 8 " "
Bismuth Carbonate 21 8 " "
60 8 " "
Black Liquor 21 8 " "
60 8 " "
Bleach Lye 10 21 8 " "
10 60 8 " "
Boric Acid 21 8 " "
60 8 " "
Brines 21 8 " "
60 8 " "
Bromic Acid 21 8 " "
60 6 Variable resistance - depends on use conditions "
Bromine bromine vapor 25 21 2 Not recommended under any conditions; oxidizer "
" 25 60 2 " "
bromine liquid 21 2 " "
bromine water 21 2 " "
bromine liquid 60 2 " "
bromine water 60 2 " "
Butadiene 21 6 Variable resistance - depends on use conditions; plasticizer "
Butanediol 21 5 Resistant - no indication of impaired service; known stress "
crack agent
60 4 Variable resistance - depends on use conditions; known "
stress crack agent
Butter 21 8 Resistant - no indication of impaired service "
60 8 " "
Butyl Acetate n-butyl acetate 21 6 Resistant - no indication of impaired service; plasticizer "
" 60 5 Variable resistance - depends on use conditions; plasticizer "
Butyl Alcohol n-butanol 21 4 Variable resistance - depends on use conditions; known "
stress crack agent
" 60 2 Not recommended under any conditions; known stress "
crack agent
Ionomer
Butyric Acid 21 2 Not recommended under any conditions "
60 2 " "
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Cadmium Cyanide 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " "
Calcium Bisulfide 21 8 " "
60 8 " "
Calcium Bisulfite 21 8 " "
60 8 " "
Calcium Carbonate 21 8 " "
60 8 " "
Calcium Chlorate 21 8 " "
60 8 " "
Calcium Chloride 21 8 " "
60 8 " "
Calcium Hydroxide 21 8 " "
bleach solution 21 5 Variable resistance - depends on use conditions; possible "
stress crack agent
60 8 Resistant - no indication of impaired service "
bleach solution 60 5 Variable resistance - depends on use conditions; possible "
stress crack agent
Calcium Nitrate 50 21 8 Resistant - no indication of impaired service "
50 60 8 " "
Calcium Oxide 21 8 " "
60 8 " "
Calcium Sulfate 21 8 " "
60 8 " "
Camphor oil 21 2 Not recommended for any conditions; possible stress crack "
agent; plasticizer
" 60 2 " "
Carbon slurry 21 8 Resistant - no indication of impaired service "
" 60 8 " "
Carbon Bisulfide 21 2 Not recommended under any conditions "
60 2 " "
Carbon Dioxide 21 8 Resistant - no indication of impaired service "
60 8 " "
Carbon Monoxide 21 8 " "
60 8 " "
Carbon Tetrachloride 21 2 Not recommended under any conditions; plasticizer "
203
60 2 " "
204
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Carbonic Acid 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " "
Castor Oil 21 8 " "
60 8 " "
Cellosolve 2-ethoxyethanol 21 6 Resistant - no indication of impaired service; plasticizer "
" 60 2 Not recommended under any conditions; plasticizer "
Chloral Hydrate 21 2 " "
60 2 " "
Chlorine chlorine water 2 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
" 2 60 5 Variable resistance - depends on use conditions; possible "
stress crack agent
dry gas 21 2 Not recommended under any conditions; oxidizer "
Liquid 21 2 " "
moist gas 21 2 " "
dry gas 60 2 " "
liquid 60 2 " "
moist gas 60 2 " "
Chlorobenzene 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Chloroform 21 2 " "
60 2 " "
Chlorosulfonic Acid 21 2 Not recommended under any conditions "
60 2 " "
Chromic Acid 10 21 8 Resistant - no indication of impaired service "
50 21 6 Resistant - no indication of impaired service; oxidizer "
Cider 21 8 Resistant - no indication of impaired service "
60 8 " "
Citric Acid 21 8 " "
60 8 " "
Coca Cola Syrup Cola concentrates 21 8 " "
" 60 8 " "
Coconut Oil Alcohols 21 5 Resistant - no indication of impaired service; known stress "
crack agent
60 4 Variable resistance - depends on use conditions; known "
Ionomer
stress crack agent
Coffee 21 8 Resistant - no indication of impaired service "
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Coffee (cont) 60 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Copper Carbonate 21 8 " "
60 8 " "
Copper Chloride 21 8 " "
60 8 " "
Copper Cyanide 21 8 " "
60 8 " "
Copper Fluoride 2 21 8 " "
2 60 8 " "
21 8 " "
60 8 " "
Copper Nitrate 21 8 " "
60 8 " "
Copper Sulfate 21 8 " "
60 8 " "
Corn Oil 21 8 " "
60 8 " "
Corn Syrup 21 8 " "
60 8 " "
Cottonseed Oil 21 6 Resistant - no indication of impaired service; plasticizer "
60 6 " "
Cresol 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Crude Oils 21 8 Resistant - no indication of impaired service "
sour crude 21 6 Resistant - no indication of impaired service; plasticizer "
60 8 Resistant - no indication of impaired service "
sour crude 60 5 Variable resistance - depends on use conditions; plasticizer "
Cuprous Chloride 21 8 Resistant - no indication of impaired service "
60 8 " "
Cyclohexanol 21 6 Resistant - no indication of impaired service; possible stress Specimen: Data for applications with material thickness greater
crack agent than 20 mils
21 6 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 5 Variable resistance - depends on use conditions; possible "
stress crack agent
60 5 " DuPont; Specimen: Data for applications with material thickness
205
greater than 20 mils
206
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Cyclohexanone 21 6 Resistant - no indication of impaired service; plasticizer DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 Not recommended under any conditions; plasticizer "
Detergents synthetic 21 6 Resistant - no indication of impaired service; possible stress Specimen: Data for applications with material thickness greater
crack agent than 20 mils
" 21 6 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
" 60 6 " Specimen: Data for applications with material thickness greater
than 20 mils
" 60 6 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Dextrin 21 8 Resistant - no indication of impaired service "
60 8 " "
Diazo Salts 21 8 " "
60 8 " "
1,2-Dibromoethane 21 2 Not recommended for any conditions; possible stress crack "
agent; plasticizer
60 2 " "
Dibutyl Phthalate 21 8 Resistant - no indication of impaired service Specimen: Data for applications with material thickness greater
than 20 mils
21 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 6 Variable resistance - depends on use conditions Specimen: Data for applications with material thickness greater
than 20 mils
60 6 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
1,2-Dichlorobenzene 21 2 Not recommended for any conditions; possible stress crack "
agent; plasticizer
60 2 " "
1,4-Dichlorobenzene 21 2 " "
60 2 " "
1,2-Dichloroethane 21 2 " "
60 2 " "
Diethyl Ether 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Diethylene Glycol 21 5 Resistant - no indication of impaired service; known stress "
crack agent
60 4 Variable resistance - depends on use conditions; known "
stress crack agent
Ionomer
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Diglycolic Acid 21 5 Resistant - no indication of impaired service; known stress DuPont; Specimen: Data for applications with material thickness
crack agent greater than 20 mils
60 5 " "
Dimethylamine 21 2 Not recommended under any conditions "
60 2 " "
Dioctyl Phthalate 21 6 Resistant - no indication of impaired service; plasticizer "
60 2 Not recommended under any conditions; plasticizer "
Disodium Phosphate 21 8 Resistant - no indication of impaired service "
60 8 " "
Esters 21 6 Resistant - no indication of impaired service; plasticizer "
60 5 Variable resistance - depends on use conditions; plasticizer "
Ethers 21 6 Resistant - no indication of impaired service; plasticizer "
60 5 Variable resistance - depends on use conditions; plasticizer "
Ethyl Acetate 21 6 Resistant - no indication of impaired service; plasticizer "
60 2 Not recommended under any conditions; plasticizer "
Ethyl Acrylate 21 6 Resistant - no indication of impaired service; plasticizer "
60 5 Variable resistance - depends on use conditions; plasticizer "
Ethyl Alcohol 21 4 Variable resistance - depends on use conditions; known DuPont
stress crack agent
21 4 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 Not recommended under any conditions; known stress DuPont
crack agent
60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Ethyl Chloride 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Ethylbenzene 21 2 Not recommended for any conditions; possible stress crack "
agent; plasticizer
60 2 " "
Ethylene Chlorohydrin 21 2 " "
60 2 " "
Ethylene Glycol 21 4 Variable resistance - depends on use conditions; known "
stress crack agent
60 2 Not recommended under any conditions; known stress "
crack agent
Ethylene Oxide 21 8 Resistant - no indication of impaired service "
60 6 Variable resistance - depends on use conditions "
207
208
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Ferric Chloride 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " "
Ferric Hydroxide 21 8 " "
60 8 " "
Ferric Nitrate 21 8 " "
60 8 " "
Ferric Sulfate 21 8 " "
60 8 " "
Ferrous Chloride 21 8 " "
60 8 " "
Ferrous Sulfate 21 8 " "
60 8 " "
Fish Solubles 21 8 " "
60 8 " "
Fluoboric Acid 21 8 " "
60 8 " "
Fluorine wet gas 21 2 Not recommended under any conditions; oxidizer "
" 60 2 " "
Formaldehyde 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 5 Variable resistance - depends on use conditions; possible "
stress crack agent
Formic Acid 21 8 Resistant - no indication of impaired service "
60 8 " "
Fructose 21 8 " "
60 8 " "
Fruit Pulp 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 6 " "
2-Furaldehyde 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Furfuryl Alcohol 21 2 Not recommended for any conditions; possible stress crack "
agent; plasticizer
60 2 " "
Gallic Acid 21 6 Resistant - no indication of impaired service; possible stress "
Ionomer
crack agent
60 6 " "
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Gasoline 21 6 Resistant - no indication of impaired service; plasticizer DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
high octane 21 6 " "
60 5 Variable resistance - depends on use conditions; "
plasticizer
high octane 60 5 " "
Genetron 11 21 6 Resistant - no indication of impaired service; plasticizer "
Genetron 12 21 6 " "
Genetron 22 21 6 " "
Glucose 21 8 Resistant - no indication of impaired service "
60 8 " "
Glycerin 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 6 " "
Glycolic Acid 30 21 5 Resistant - no indication of impaired service; known stress "
crack agent
30 60 5 " "
Glycols 21 4 Variable resistance - depends on use conditions; known "
stress crack agent
60 2 Not recommended under any conditions; known stress "
crack agent
Grape Sugar saturated, aqueous 21 8 Resistant - no indication of impaired service "
" 60 8 " "
Hexachlorobenzene 21 8 " "
60 8 " "
Hexane 21 6 Resistant - no indication of impaired service; "
plasticizer
60 5 Variable resistance - depends on use conditions; "
plasticizer
Hydrobromic Acid 50 21 8 Resistant - no indication of impaired service "
50 60 8 " "
Hydrochloric Acid 21 8 " DuPont
21 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
dry gas 21 8 " DuPont
" 21 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " DuPont
60 8 " DuPont; Specimen: Data for applications with material thickness
209
greater than 20 mils
210
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Hydrochloric Acid (cont) dry gas 60 8 Resistant - no indication of impaired service DuPont
" 60 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Hydrocyanic Acid 21 8 " "
60 8 " "
Hydrofluoric Acid 60 21 8 " "
60 60 8 " "
Hydrofluorosilicic Acid 32 21 8 " "
32 60 8 " "
concentrated 21 8 " "
" 60 6 Variable resistance - depends on use conditions "
Hydrogen 21 8 Resistant - no indication of impaired service "
60 8 " "
Hydrogen Peroxide 3 21 8 " "
3 60 6 Variable resistance - depends on use conditions "
Hydrogen Sulfide 21 8 Resistant - no indication of impaired service "
60 8 " "
Hydroquinone 21 8 " "
60 8 " "
Hydroxylamine Sulfate 21 8 " "
60 8 " "
Hypochlorous Acid 21 8 " "
60 8 " "
Inks 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 6 " "
Iodine 21 2 Not recommended under any conditions; oxidizer "
60 2 " "
Isopropyl Alcohol isopropanol 21 4 Variable resistance - depends on use conditions; known "
stress crack agent
" 60 2 Not recommended under any conditions; known stress "
crack agent
Jet Aircraft Fuels JP4 and JP5 21 5 Variable resistance - depends on use conditions; plasticizer "
60 2 Not recommended under any conditions; plasticizer "
Kerosene 21 5 Variable resistance - depends on use conditions; plasticizer "
60 2 Not recommended under any conditions; plasticizer "
Ionomer
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Lactic Acid 25 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
25 60 8 " "
Latex 21 8 " "
60 8 " "
Lauric Acid 21 8 " "
60 6 Variable resistance - depends on use conditions "
Lauryl Chloride 21 5 Variable resistance - depends on use conditions; plasticizer "
Lead Acetate 21 8 Resistant - no indication of impaired service "
60 8 " "
Lead Chloride 21 8 " "
60 8 " "
Lead Nitrate 21 8 " "
60 8 " "
Lead Sulfate 21 8 " "
60 8 " "
Linseed Oil 21 5 Variable resistance - depends on use conditions; plasticizer "
60 2 Not recommended under any conditions; plasticizer "
Liquors Kraft liquors 21 8 Resistant - no indication of impaired service "
" 60 8 " "
Lithium Bromide 21 8 " "
60 8 " "
Lubricating Oils ASTM Oil No. 1,2,3 21 6 Resistant - no indication of impaired service; plasticizer "
60 5 Variable resistance - depends on use conditions; plasticizer "
Machining Oils 21 6 Resistant - no indication of impaired service; plasticizer "
60 5 Variable resistance - depends on use conditions; plasticizer "
Magnesium Carbonate 21 8 Resistant - no indication of impaired service "
60 8 " "
Magnesium Chloride 21 8 " "
60 8 " "
Magnesium Citrate 21 8 " "
60 8 " "
Magnesium Hydroxide 21 8 " "
60 8 " "
Magnesium Nitrate 21 8 " "
60 8 " "
211
212
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Magnesium Sulfate 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " "
Maleic Acid 21 8 " "
60 8 " "
Mercuric Chloride 21 8 " "
60 8 " "
Mercuric Cyanide 21 8 " "
60 8 " "
Mercurous Nitrate 21 8 " "
60 8 " "
Mercury 21 8 " "
60 8 " "
Methane 21 6 Resistant - no indication of impaired service; plasticizer "
Methyl Alcohol 21 "
21 4 Variable resistance - depends on use conditions; known "
stress crack agent
60 "
60 2 Not recommended under any conditions; known stress "
crack agent
Methyl Chloride 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Methyl Ethyl Ketone 21 6 Resistant - no indication of impaired service; plasticizer "
60 5 Variable resistance - depends on use conditions; plasticizer "
Methyl Isobutyl Ketone 21 6 Resistant - no indication of impaired service; plasticizer Specimen: Data for applications with material thickness greater
than 20 mils
21 6 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 5 Variable resistance - depends on use conditions; plasticizer Specimen: Data for applications with material thickness greater
than 20 mils
60 5 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Methyl Sulfate 21 8 Resistant - no indication of impaired service "
60 8 " "
Methyl Sulfuric Acid 21 8 " "
60 8 " "
Methylene Chloride 21 2 Not recommended for any conditions; possible stress crack "
Ionomer
agent; plasticizer
60 2 " "
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Milk 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " "
Mineral Oils 21 8 " "
60 6 Variable resistance - depends on use conditions "
Molasses 21 8 Resistant - no indication of impaired service "
60 8 " "
Naphtha 21 5 Variable resistance - depends on use conditions; plasticizer Specimen: Data for applications with material thickness greater
than 20 mils
21 5 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 Not recommended under any conditions; plasticizer Specimen: Data for applications with material thickness greater
than 20 mils
60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Naphthalene 21 2 " "
60 2 " "
Natural Gas dry and wet 21 6 Resistant - no indication of impaired service; plasticizer "
n-Heptane 21 6 " "
n-heptane 21 6 " "
60 5 Variable resistance - depends on use conditions; plasticizer "
n-heptane 60 5 " "
Nickel Chloride 21 8 Resistant - no indication of impaired service "
60 8 " "
Nickel Nitrate 21 8 " "
60 8 " "
Nickel Sulfate 21 8 " "
60 8 " "
Nicotine dilute 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
" 60 6 " "
Nitric Acid 10 21 8 Resistant - no indication of impaired service "
10 60 6 Variable resistance - depends on use conditions "
98 21 2 Not recommended under any conditions; oxidizer "
98 60 2 " "
fuming 21 2 " "
" 60 2 " "
213
214
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Nitrobenzene 21 2 Not recommended under any conditions; plasticizer DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 " "
Nitrous Oxide 21 6 Resistant - no indication of impaired service; plasticizer "
Octane n-octane 21 6 " "
" 60 6 " "
Oleic Acid 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Oxalic Acid 21 8 Resistant - no indication of impaired service "
60 8 " "
Oxygen 21 6 Resistant - no indication of impaired service; oxidizer "
60 5 Variable resistance - depends on use conditions; oxidizer "
Ozone 21 6 Resistant - no indication of impaired service; oxidizer "
3-Pentanone 21 5 Variable resistance - depends on use conditions; possible "
stress crack agent
60 2 Not recommended under any conditions; possible stress "
crack agent
Perchloric Acid 70 21 2 Not recommended under any conditions; oxidizer "
70 60 2 " "
Phenol 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Phenylhydrazine 21 2 " "
60 2 " "
Phenylhydrazine 21 2 " "
Hydrochloride
60 2 " "
Phosphoric Acid 21 8 Resistant - no indication of impaired service "
60 8 " "
Photographic 21 8 " "
Developers
60 8 " "
Photographic Solutions 21 8 " "
60 8 " "
Picric Acid 21 2 Not recommended under any conditions; oxidizer "
60 2 " "
Plating Solutions brass 21 8 Resistant - no indication of impaired service "
Ionomer
cadmium 21 8 " "
copper 21 8 " "
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Plating Solutions (cont) gold 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
lead 21 8 " "
nickel 21 8 " "
silver 21 8 " "
tin 21 8 " "
zinc 21 8 " "
brass 60 8 " "
cadmium 60 8 " "
copper 60 8 " "
gold 60 8 " "
lead 60 8 " "
nickel 60 8 " "
silver 60 8 " "
tin 60 8 " "
zinc 60 8 " "
Potassium Bicarbonate 21 8 " "
60 8 " "
Potassium Borate 21 8 " "
60 8 " "
Potassium Bromate 21 8 " "
60 8 " "
Potassium Bromide 21 8 " "
60 8 " "
Potassium Carbonate 21 8 " "
60 8 " "
Potassium Chlorate 21 8 " "
60 8 " "
Potassium Chloride 21 8 " "
60 8 " "
Potassium Chromate 40 21 8 " "
40 60 8 " "
Potassium Cyanide 21 8 " "
60 8 " "
Potassium Dichromate 40 21 8 " "
40 60 8 " "
215
216
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Potassium Dichromate 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
(cont) greater than 20 mils
60 8 " "
Potassium Ferricyanide 21 8 " "
60 8 " "
Potassium Ferrocyanide 21 8 " "
60 8 " "
Potassium Fluoride 21 8 " "
60 8 " "
Potassium Hydroxide 21 8 " "
60 8 " "
Potassium Nitrate 21 8 " "
60 8 " "
Potassium Perborate 21 8 " "
60 8 " "
Potassium Perchlorate 10 21 8 " "
10 60 8 " "
Potassium 20 21 8 " "
Permanganate
20 60 8 " "
Potassium Persulfate 21 8 " "
60 8 " "
Potassium Sulfate 21 8 " "
60 8 " "
Potassium Sulfide 21 8 " "
60 8 " "
Potassium Sulfite 21 8 " "
60 8 " "
Propane 21 2 Not recommended under any conditions; plasticizer "
60 2 " "
Propargyl Alcohol 21 5 Resistant - no indication of impaired service; known stress "
crack agent
60 4 Variable resistance - depends on use conditions; known "
stress crack agent
Propyl Alcohol n-propyl alcohol 21 4 " "
" 60 2 Not recommended under any conditions; known stress "
Ionomer
crack agent
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Propylene Dichloride 21 2 Not recommended under any conditions; plasticizer DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 " "
Propylene Glycol 21 5 Resistant - no indication of impaired service; known stress "
crack agent
60 4 Variable resistance - depends on use conditions; known "
stress crack agent
Pyridine 21 8 Resistant - no indication of impaired service "
60 2 Not recommended under any conditions "
Resorcinol 21 8 Resistant - no indication of impaired service "
60 8 " "
Salicylic Acid 21 8 " "
60 8 " "
Sea Water 21 8 " "
60 8 " "
Selenic Acid 21 8 " "
60 8 " "
Sewage 21 8 " "
60 8 " "
Shortening 21 8 " "
60 8 " "
Silicic Acid 21 8 " "
60 8 " "
Silver Cyanide 21 8 " "
60 8 " "
Silver Nitrate solution 21 8 " "
" 60 8 " "
Silver Sulfate 21 8 " "
60 8 " "
Soaps solutions 21 8 " Specimen: Data for applications with material thickness greater
than 20 mils
" 21 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
" 60 8 " Specimen: Data for applications with material thickness greater
than 20 mils
" 60 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Sodium Acetate 21 8 " "
217
60 8 " "
218
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Sodium Benzoate 35 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
35 60 8 " "
Sodium Bicarbonate 21 8 " "
60 8 " "
Sodium Bisulfate 21 8 " "
60 8 " "
Sodium Bisulfite 21 8 " "
60 8 " "
Sodium Borate 21 8 " "
60 8 " "
Sodium Bromide dilute 21 8 " "
" 60 8 " "
Sodium Carbonate 21 8 " Specimen: Data for applications with material thickness greater
than 20 mils
21 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " Specimen: Data for applications with material thickness greater
than 20 mils
60 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Sodium Chlorate 21 8 " "
60 8 " "
Sodium Chloride 21 8 " "
60 8 " "
Sodium Cyanide 21 8 " "
60 8 " "
Sodium Dichromate 21 8 " "
60 8 " "
Sodium Ferricyanide 21 8 " "
60 8 " "
Sodium Ferrocyanide 21 8 " "
60 8 " "
Sodium Fluoride 21 8 " "
60 8 " "
Ionomer
Sodium Hydroxide 21 8 " DuPont
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Sodium Hydroxide 21 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
(cont) greater than 20 mils
60 8 " DuPont
60 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Sodium Hypochlorite 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 5 Variable resistance - depends on use conditions; possible "
stress crack agent
Sodium Nitrate 21 8 Resistant - no indication of impaired service "
60 8 " "
Sodium Nitrite 21 8 " "
60 8 " "
Sodium Peroxide 21 6 Resistant - no indication of impaired service; oxidizer "
Sodium Sulfate 21 8 Resistant - no indication of impaired service "
60 8 " "
Sodium Sulfide 21 8 " "
60 8 " "
Sodium Sulfite 21 8 " "
60 8 " "
Stannic Chloride 21 8 " "
60 8 " "
Stannous Chloride 21 8 " "
60 8 " "
Starch solution 21 8 " "
" 60 8 " "
Stearic Acid 21 8 " "
60 8 " "
Stoddard Solvents white spirits 21 6 Resistant - no indication of impaired service; plasticizer "
" 60 5 Variable resistance - depends on use conditions; plasticizer "
Sulfur 21 8 Resistant - no indication of impaired service "
60 8 " "
Sulfur Dioxide dry or wet 21 8 " "
" 60 6 Variable resistance - depends on use conditions "
Sulfuric Acid 30 21 8 Resistant - no indication of impaired service DuPont
30 21 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
219
30 60 8 " DuPont
220
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Sulfuric Acid (cont) 30 60 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
98 21 2 Not recommended under any conditions; oxidizer DuPont
98 21 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
98 60 2 " DuPont
98 60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
fuming, oleum 21 2 " DuPont
" 21 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
" 60 2 " DuPont
" 60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Sulfurous Acid 21 8 Resistant - no indication of impaired service "
60 8 " "
Tallow 21 6 Resistant - no indication of impaired service; plasticizer "
60 5 Variable resistance - depends on use conditions; plasticizer "
Tannic Acid 21 8 Resistant - no indication of impaired service "
60 8 " "
Tanning Solutions tanning liquors 21 8 " "
" 60 8 " "
Tartaric Acid 21 8 " "
60 8 " "
tert-Hexyl Alcohol tert-hexanol 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
" 60 6 " "
Tetrachloroethene 21 6 Resistant - no indication of impaired service; plasticizer "
60 2 Not recommended under any conditions; plasticizer "
Tetrahydrofuran 21 2 " "
60 2 " "
Thionyl Chloride 21 2 " "
60 2 " "
Titanium Tetrachloride 21 2 Not recommended under any conditions "
60 2 " "
Toluene 21 2 Not recommended under any conditions; plasticizer DuPont
Ionomer
21 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Ionomer
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Toluene (cont) 60 2 Not recommended under any conditions; plasticizer DuPont
60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Tributyl Phosphate 21 5 Variable resistance - depends on use conditions; plasticizer "
60 5 " "
Trichloroethene 21 2 Not recommended under any conditions; plasticizer DuPont
21 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 " DuPont
60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Triethylene Glycol 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 5 Variable resistance - depends on use conditions; possible "
stress crack agent
Trisodium Phosphate 21 8 Resistant - no indication of impaired service "
60 8 " "
Turpentine 21 5 Variable resistance - depends on use conditions; plasticizer Specimen: Data for applications with material thickness greater
than 20 mils
21 5 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 2 Not recommended under any conditions; plasticizer Specimen: Data for applications with material thickness greater
than 20 mils
60 2 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Urea 30 21 8 Resistant - no indication of impaired service "
30 60 8 " "
Urine 21 8 " "
60 8 " "
Vanilla vanilla extract 21 5 Resistant - no indication of impaired service; known stress "
crack agent
" 60 4 Variable resistance - depends on use conditions; known "
stress crack agent
Vinegar 21 8 Resistant - no indication of impaired service "
60 8 " "
Vinyl Acetate 21 5 Variable resistance - depends on use conditions; plasticizer "
Water 21 8 Resistant - no indication of impaired service "
acid mine water 21 8 " "
distilled, all 21 8 " "
concentrations
221
salt and sea 21 8 " "
222
Conc. Temp. PDL
Exposure medium Exp. medium note Resistance note Material note
(%) (C) #
Water (cont) 60 8 Resistant - no indication of impaired service DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
acid mine water 60 8 " "
distilled, all 60 8 " "
concentrations
salt and sea 60 8 " "
Wetting Agents 21 8 " "
60 8 " "
Whiskey 21 5 Resistant - no indication of impaired service; known stress "
crack agent
60 4 Variable resistance - depends on use conditions; known "
stress crack agent
Wines 21 6 Resistant - no indication of impaired service; possible stress "
crack agent
60 5 Variable resistance - depends on use conditions; possible "
stress crack agent
Xylene 21 6 Resistant - no indication of impaired service; plasticizer "
60 6 " "
Yeast 21 8 Resistant - no indication of impaired service "
60 8 " "
Zinc Bromide 21 8 " "
60 8 " "
Zinc Carbonate 21 8 " "
60 8 " "
Zinc Chloride 21 8 " Specimen: Data for applications with material thickness greater
than 20 mils
21 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
60 8 " Specimen: Data for applications with material thickness greater
than 20 mils
60 8 " DuPont; Specimen: Data for applications with material thickness
greater than 20 mils
Zinc Nitrate 21 8 " "
60 8 " "
Zinc Oxide 21 8 " "
60 8 " "
Zinc Stearate 21 8 " "
60 8 " "
Ionomer
Zinc Sulfate 21 8 " "
60 8 " "
Part 5: Olefinic Polymers
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Acetaldehyde aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
technical grade 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Acetaldehyde/Acetic 90/10 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
Acid at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
90/10 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Acetamide 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Acetanilide 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Acetic Acid 5 20 9 " "
Woishnis and Ebnesajjad. Chemical Resistance of Thermoplastics. DOI: 10.1016/B978-1-4557-7896-6.00005-4
224
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Acetic Acid (cont) 5 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
50 20 9 " "
50 60 9 " "
aqueous 70 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 70 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 70 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 70 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
100 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
technical grade 100 20 9 " " "
100 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
technical grade 100 20 9 " " "
100 60 7 Discoloration possible " Luflexen; Basell; Specimen:
5032531 mm
technical grade 100 60 7 " " "
100 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
technical grade 100 60 7 " " "
glacial 20 9 Good resistance; the SABIC LLDPE; SABIC
225
226
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Adipic Acid (cont) aqueous saturated 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Air technical grade 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Aktivin aqueous 1 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 1 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 1 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 1 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
227
product has no effect
228
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Aluminum Alum (cont) all types 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Aluminum Chloride aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
solid 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Aluminum Fluoride concentrated 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
229
5032531 mm
230
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Amino Acids (cont) 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
2-Aminoethanol technical grade 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Ammonia water any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
gaseous 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
liquid 20 9 " " "
gaseous 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
liquid 20 9 " " "
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Ammonium Acetate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
231
232
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Ammonium Nitrate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Ammonium Phosphate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Ammonium Sulfate " " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
233
234
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Amyl Chloride (cont) 100 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
100 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Amyl Phthalate 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 " " Luflexen; Basell; Specimen:
5032531 mm
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Aniline any 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Aniline Hydrochloride aqueous any 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
(cont) at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Animal Oils 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Aniseed 20 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
oil 20 1 " " "
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
oil 20 1 " " "
" 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
oil 60 1 " " "
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 1 " " "
oil 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Anisole 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
235
236
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Anisole (cont) 20 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Anthraquinone 20 9 " "
60 9 " "
Anthraquinonesulfonic aqueous 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
Acid at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Antifreeze automotive; as 20 9 " " Luflexen; Basell; Specimen:
supplied commerc. 5032531 mm
237
reduced
238
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Aromatic Oils (cont) 20 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Arsenic 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Arsenic Acid aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Arsenic Acid Anhydride 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
239
product has no effect
240
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Barium Sulfide (cont) 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Battery Acid 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Beef Tallow 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Beer 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
241
242
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Benzaldehyde (cont) 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Benzene technical grade 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Benzene Hexachloride 20 9 " "
60 9 " "
Benzenesulfonic Acid 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
243
244
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Bichromate Sulfuric Acid concentrated 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
20 3 Doubtful; application of PE SABIC LLDPE; SABIC
as packaging material
(bottles) involves hazards
wich can be disregarded in
some special cases only
60 1 Not recommended for "
packaging applications
Bicycle Oil 20 9 Good resistance; the "
product has no effect
60 9 " "
Bismuth Salts 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Bismuth Trichloride 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
245
5032531 mm
246
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Bone Oil (cont) 60 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
Borax aqueous saturated 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Boric Acid aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
solution 20 9 " "
60 9 " "
247
248
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Bromic Acid concentrated 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
Bromine liquid 100 20 1 " " Luflexen; Basell; Specimen:
5032531 mm
" 100 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
vapour 20 1 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
20 1 Not recommended for SABIC LLDPE; SABIC
packaging applications
60 1 " "
Bromine Water cold 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
saturated at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Bromobenzene 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Bromochloromethane 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
249
product has no effect
250
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Butyl Acrylate 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Butyl Alcohol aqueous any 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" " 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Butyl Benzyl Phthalate 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
251
252
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Butyric Acid aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" " 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Cadmium Sulfide 20 9 " "
60 9 " "
Caffeine and its salts 20 9 " "
" 60 9 " "
Calcium Carbide 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
253
break unchanged 527-2
254
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Calcium Nitrate (cont) aqueous 50 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 50 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 50 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Calcium Oxide powder 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Calcium Phosphate 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Calcium Sulfate 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
255
256
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Carbolineum (cont) as supplied 20 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
commerc. strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
aqueous; for fruit 60 7 Discoloration possible Test specimen 1B Luflexen; Basell; Specimen:
trees according to ISO 5032531 mm
527-2
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Carbon black 20 9 " "
" 60 9 " "
Carbon Bisulfide 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
257
5032531 mm
258
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Cetyl Alcohol (cont) 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Chloral Hydrate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 7 Discoloration possible " Luflexen; Basell; Specimen:
5032531 mm
" " 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Chloramines aqueous saturated 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Chloric Acid aqueous 1 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 1 20 9 " " Lupolex; Basell; Specimen:
259
260
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Chlorine Water saturated 60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Chloroacetic Acid aqueous ,=85 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
" ,=85 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" ,=85 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" ,=85 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
aqueous; mono any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
mono; aqueous " 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" " 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
mono 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
261
262
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Chloropropionic Acid 60 9 Good resistance; the SABIC LLDPE; SABIC
(cont) product has no effect
Chlorosulfonic Acid technical grade 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 1 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Chromate yellow 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
" 60 9 " "
Chromatic Acid 20 5 Fair resistance; less "
suitable grades and
unfavourable conditions
give rise to difficulties
60 1 Not recommended for "
packaging applications
Chrome Alum aqueous saturated 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
Chrome Salts (cont) aqueous any 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Chromic Acid " 50 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 50 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
" 50 60 7 Discoloration possible " Luflexen; Basell; Specimen:
5032531 mm
" 50 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Chromium Trioxide " 50 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 50 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
" 50 60 7 Discoloration possible " Luflexen; Basell; Specimen:
5032531 mm
" 50 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Chromosulfuric Acid 20 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
Cider 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Cinnamon 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
263
264
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Cinnamon (cont) 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Cinnamon Oil 20 9 " "
60 9 " "
Citric Acid aqueous saturated 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Citronel Oil 20 9 " "
60 9 " "
Citrus Juices 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
fruit 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
265
266
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Cod Liver Oil (cont) 60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Coffee 20 9 " "
60 9 " "
Coffee Extract 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Cognac 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Cola Concentrates 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Copper Chloride (cont) aqueous saturated 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Copper Cyanide " " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Copper Fluoride " " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Copper Nitrate " 30 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 30 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 30 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 30 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Copper Oxide 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Copper Oxychloride 20 9 " "
60 9 " "
Copper Salts aqueous cold 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
saturated at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Copper Sulfate " any 20 9 " " Luflexen; Basell; Specimen:
267
5032531 mm
268
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Copper Sulfate (cont) aqueous any 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Corn Oil 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Cottonseed Oil technical grade 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
269
270
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Crude Oils (cont) minerals 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Cyanamide 20 9 " "
60 9 " "
Cyclanone fatty alcohol 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
sulphonate; as at yield and elongation at according to ISO 5032531 mm
supplied commerc. break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Cyclohexane 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Cyclohexanol 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Cyclohexanone (cont) 20 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
DDT powder 20 9 " "
" 60 9 " "
Decahydronaphthalene technical grade 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Defoamer 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
60 7 " " Lupolex; Basell; Specimen:
271
5032531 mm
272
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Detergents synthetic end use 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
concen- at yield and according to ISO 5032531 mm
tration elongation at break 527-2
unchanged
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
liquid 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
powder 20 9 " "
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
liquid 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
powder 60 9 " "
Developing Solutions photographic 20 7 Discoloration possible Test specimen 1B Luflexen; Basell; Specimen:
according to ISO 5032531 mm
273
reduced
274
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
1,2-Dibromoethane 20 1 Not resistant; tensile Test specimen 1B Lupolex; Basell; Specimen:
(cont) strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Luflexen; Basell; Specimen:
5032531 mm
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Dibutyl Ether 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Dibutyl Phthalate technical grade 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
275
276
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Dichlorobenzene (cont) 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 5 Fair resistance; less SABIC LLDPE; SABIC
suitable grades and
unfavourable conditions
give rise to difficulties
Dichlorodiphenyl- DDT; powder 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
trichloroethane at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
1,2-Dichloroethane 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
277
278
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Diethanolamine technical grade 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Diethyl Ether 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Diethyl Ketone 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
279
280
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Diisobutyl Ketone (cont) technical grade 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Diisoctyl Phthalate " 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
Diisopropyl Ether 20 7 " " Luflexen; Basell; Specimen:
5032531 mm
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Dimethyl Sulfoxide 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Dimethylamine 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
281
break unchanged 527-2
282
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Diphenylamine (cont) 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Disodium Phosphate 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Disodium Sulfate 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
283
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
284
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Electroplating Baths for electroplating 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 " " Luflexen; Basell; Specimen:
5032531 mm
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Emulsifiers 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and 5032531 mm
elongation at break
unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Emulsions photographic 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Engine Oils 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Ephetin aqueous 10 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
285
elongation at break slightly 527-2
reduced
286
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Ethyl Acetate (cont) technical grade 20 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Ethyl Alcohol 96 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
denatured with 96 20 9 " " "
toluene
96 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
denatured with 96 20 9 " " "
toluene
96 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
96 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
287
288
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Ethylene Chlorohydrin technical grade 60 7 Discoloration possible Test specimen 1B Luflexen; Basell; Specimen:
(cont) according to ISO 5032531 mm
527-2
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Ethylene Glycol 20 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Ethylene Glycol Butyl technical grade 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
Ether at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
289
290
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
291
5032531 mm
292
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Ferric Chloride (cont) aqueous any 60 9 Resistant; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Ferric Nitrate " saturated 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Ferric Sulfate " " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Ferrous Chloride " " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Fertilizers (cont) salts; aqueous any 60 9 Resistant; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Fir Needle Oil 20 9 " "
60 9 " "
Fixative 20 9 " "
60 9 " "
Fixer salt; aqueous any 20 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
salt; solid 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Floor Waxe 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Fluoboric Acid aqueous 20 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
293
reduced
294
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Fluoboric Acid (cont) aqueous 60 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
Fluorine gaseous 20 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
" 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
Fluosilicic Acid any 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
aqueous " 20 9 " " "
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
aqueous " 20 9 " " "
" 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
aqueous " 60 9 " " "
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 9 " " "
Formaldehyde aqueous up to 40 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
295
296
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Freon 12 (cont) 100 60 1 Not resistant; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
Frigene 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Fructose aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Fruit Juices unfermented " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
fermented 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
297
5032531 mm
298
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
299
300
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Gamma Radiation (cont) 2.5 megarads Cobalt 9 Retains 966% of 85 97 Tensile strength per Dowlex 2535; Dow
60, tested 6 months instrumented dart impact ASTM D638-84; 10 Chemical; Specimen:
stored in dark after energy mil notched Izod 3.2351 mm (0.12532 in)
exposure per ASTM D256-84 injection molded discs;
ASTM Type I tensile bars
Gas Liquor 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Gases manufactured; as 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
supplied commerc. at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Gasoline regular-grade; DIN 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
51635 strength at yield and 5032531 mm
elongation at break slightly
reduced
" 20 7 " " Lupolex; Basell; Specimen:
301
302
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Glues (cont) 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
fish; bone 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Glycerin aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
303
304
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Glysantin (cont) 60 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
Gypsum 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Heptane 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Hexachlorocyclohexane 20 9 " "
60 9 " "
Hexane 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
Hexanetriol (cont) 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Hexyl Alcohol 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Honey 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Hydraulic Fluids 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Hydrazine Hydrate 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Hydrobromic Acid aqueous 50 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 50 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
305
306
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Hydrobromic Acid (cont) aqueous 50 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 50 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
gaseous; technical 20 9 " " Luflexen; Basell; Specimen:
grade 5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Hydrochloric Acid aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
chemical pure 20 9 " "
60 9 " "
chemical pure 60 9 " "
307
308
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Hydrogen Peroxide aqueous 30 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
(cont) strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 30 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
" 30 60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
" 30 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
100 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
100 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
100 60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
100 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
solution 20 5 Fair resistance; less SABIC LLDPE; SABIC
suitable grades and
unfavourable conditions
give rise to difficulties
309
310
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Igepal (cont) 10 50 1 3 Exposure time represents Per ASTM D1693 Petrothene PA 436;
time to failure for 50% of condition A Quantum; Specimen: 5.5
the test specimens melt index; 0.935 g/cu-cm
density; rotational molded
grade; butene based
10 50 3.8 4 " " Petrothene GA 635;
Quantum; Specimen: 6.5
melt index; 0.935 g/cu-cm
density; rotational molding
grade; hexene based
10 50 14.6 6 " " Petrothene GA 625;
Quantum; Specimen: 5.0
melt index; 0.935 g/cu-cm
density; rotational molded
grade; hexene based
detergent solution; 10 50 .20.8 7 " ASTM D1693B; bent DFDA-7540; Union Carbide;
Igepal CO-630 specimens placed in Specimen: Notched thin
tube containing strips; wire and cable grade;
exposure medium natural color
" 10 50 .20.8 7 " " DFDB-6059; Union Carbide;
Specimen: Notched thin
strips; wire and cable grade
" 10 50 .20.8 7 " " DFDB-6425; Union Carbide;
Specimen: Notched thin
strips; wire and cable grade
100 50 27.1 7 " Per ASTM D1693 Petrothene PA 444;
condition A Quantum; Specimen: 4.0
melt index; 0.939 g/cu-cm
density; rotational molded
311
312
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Iodine (cont) tincture; DAB 6; as 60 7 Discoloration possible Test specimen 1B Luflexen; Basell; Specimen:
supplied commerc. according to ISO 5032531 mm
527-2
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
tincture 60 9 " "
Isoamyl Alcohol technical grade 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Isobutyl Alcohol 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
Isobutyric Acid (cont) technical grade 60 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
Isooctane 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Isopropyl Acetate 100 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
100 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
100 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
100 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Isopropyl Alcohol 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
technical grade 20 9 " " "
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
technical grade 20 9 " " "
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
313
314
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Isopropyl Alcohol (cont) technical grade 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
technical grade 60 9 " " "
Isopropyl Ether " 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Jams 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
315
5032531 mm
316
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Lanolin wool fat 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
wool fat 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Lard 20 9 " "
60 9 " "
Latex 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
rubber dispersions 20 9 " " "
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
rubber dispersions 20 9 " " "
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
317
318
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Lindane powder 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
" 60 9 " "
Linseed Oil technical grade 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Lithium Bromide 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Lotion hair; shaving 20 9 Good resistance; the SABIC LLDPE; SABIC
319
5032531 mm
320
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Magnesium Sulfate aqueous any 20 9 Resistant; tensile Test specimen 1B Lupolex; Basell; Specimen:
(cont) strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Maleic Acid " up to 100 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Malic Acid aqueous 50 20 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" 50 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Manganese Sulfate 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Margarine 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
321
322
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Methoxybutyl Acetate butoxyl 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
(cont) at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
Methoxybutyl Alcohol 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Methyl Acetate technical grade 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Methyl Acrylate 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Methyl Alcohol 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
technical grade 20 9 " " "
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
technical grade 20 9 " " "
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
323
324
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Methyl Salicylate (cont) 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Methyl Sulfuric Acid 50 20 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
50 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
4-Methyl-2-Pentanol 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Methylamine aqueous 32 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 32 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Methylbenzoic Acids saturated 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
Methylcyclohexane 20 7 " " Luflexen; Basell; Specimen:
5032531 mm
325
5032531 mm
326
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Morpholine (cont) 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Motor Oils heavy duty oil 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Mowilith emulsion 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Mustard 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Nail Polish Remover 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Nail Varnish 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
327
328
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Nicotine (cont) 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Nicotinic Acid ,=10 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
,=10 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Nitric Acid 25 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
25 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
50 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
50 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
95 20 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
95 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
,=50 20 5 Fair resistance; less SABIC LLDPE; SABIC
suitable grades and
unfavourable conditions
give rise to difficulties
,=50 60 9 Good resistance; the "
product has no effect
329
330
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Octyl Alcohol (cont) 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Octyl Cresol technical grade 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
Oleic Acid 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Oleum 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
20 3 Doubtful; application of PE SABIC LLDPE; SABIC
as packaging material
(bottles) involves hazards
wich can be disregarded in
some special cases only
60 1 Not recommended for "
packaging applications
331
332
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Palmitic Acid (cont) 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Palmityl Alcohol 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Paraffin liquid 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
wax emulsions; as 20 9 " " "
supplied commerc.
liquid 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
wax emulsions; as 20 9 " " "
supplied commerc.
solid 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
" 60 9 " "
Paraffin Oil 20 9 " "
60 9 " "
Paraformaldehyde 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
333
334
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Perchloroethylene 20 9 Good resistance; the SABIC LLDPE; SABIC
(cont) product has no effect
60 9 " "
Perfumes 20 9 " "
60 9 " "
Petrol regular-grade; DIN 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
51635 strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
Petroleum 20 7 " " Luflexen; Basell; Specimen:
5032531 mm
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Petroleum Ether 20 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Phenolic Resins molding compounds 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Phenolsulfonic Acid 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Phenoxyacetic Acid 20 9 " "
60 9 " "
Phenylethyl Alcohol 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Phenylhydrazine technical grade 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
Phenylhydrazine 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
Hydrochloride at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Phenylphenol 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Phenylsulfonate 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Phosphates aqueous any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
liquor for metal 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
335
" 60 9 " "
336
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Phosphoric Acid aqueous 50 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 50 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 80]95 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 80]95 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
concentrated 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
" 60 9 " "
Phosphorus Oxychloride 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Phosphorus Pentoxide 100 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
100 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Phosphorus Trichloride 20 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
Photographic 20 7 Discoloration possible " Luflexen; Basell; Specimen:
Photographic Solutions emulsion; as 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
(cont) supplied commerc. at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
Phthalic Acid aqueous 50 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 50 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Phthalic Acid Dibutyl technical grade 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
Ester strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
Phthalic Acid Ester 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Phthalic Anhydride 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Picric Acid aqueous 1 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 1 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Pigments dry for paints; 20 9 " "
plastics
" 60 9 " "
Pine Needle Oil 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
337
338
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Pine Oil 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Pineapple Juice 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Plasticizers 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 " " Luflexen; Basell; Specimen:
5032531 mm
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Polyacrylic Acid 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
Emulsions at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Polyesters plasticizer 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
339
340
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Potassium Aluminum any 60 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
Sulfate (cont) strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Bicarbonate aqueous saturated 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Bisulfate " " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Bisulfite " " 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
341
5032531 mm
342
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Potassium Chromate aqueous 40 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 40 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 40 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 40 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Cyanide " any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Potassium Dichromate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
343
product has no effect
344
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Potassium Hypochlorite aqueous saturated 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" " 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
" " 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Iodide " any 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Potassium Nitrate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
345
5032531 mm
346
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Potassium Persulfate aqueous any 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
(cont) at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Phosphate " saturated 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Sulfate " any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Potassium Sulfide " saturated 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
347
348
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Propyl Alcohol 20 9 Resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Propylene Dichloride 100 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
100 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
Propylene Glycol 20 9 Resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break
unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
349
350
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Salad Oil 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Salad Sauce 20 9 " "
60 9 " "
Salicylaldehyde 20 9 " "
60 9 " "
Salicylic Acid 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Salt Brine saturated 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
351
352
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Silicone Oil technical grade 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Silicones emulsion; as 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
supplied commerc. at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Silver Nitrate aqueous any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 " " Luflexen; Basell; Specimen:
353
break unchanged 527-2
354
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Soda (cont) aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
caustic; solution " 20 9 " " "
aqueous " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
caustic; solution " 60 9 " " "
aqueous " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
caustic; solution " 60 9 " " "
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
caustic 20 9 " "
60 9 " "
caustic 60 9 " "
Sodium Acetate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
355
356
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Sodium Carbonate aqueous any 60 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
(cont) at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
Sodium Chlorate " saturated 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Chloride " any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Chlorite " 50 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 50 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Chromate 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
357
358
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Sodium Fluoride (cont) 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium aqueous saturated 20 9 " " Luflexen; Basell; Specimen:
Hexametaphosphate 5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Hydrosulfite " up to 10 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Hydroxide " any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
359
5032531 mm
360
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Sodium Perborate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" " 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Perchlorate " " 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Peroxide " 10 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 10 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 10 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" 10 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Silicate aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Sulfate aqueous cold 20 9 " " Luflexen; Basell; Specimen:
saturated 5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sodium Sulfide " any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Sodium Tetraborate aqueous saturated 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
361
362
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Sodium Thiosulfate aqueous saturated 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Soldering Fluid 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Soya Oil 20 9 " "
60 9 " "
Soybean Oil 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Spermaceti 20 7 " " Luflexen; Basell; Specimen:
5032531 mm
363
364
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Stearic Acid (cont) 60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Styrene 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Sublimate 20 9 " "
60 9 " "
Succinic Acid 50 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
365
366
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Sulfur Dioxide (cont) aqueous any 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Sulfur Trioxide 20 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
20 3 Doubtful; application of PE SABIC LLDPE; SABIC
as packaging material
(bottles) involves hazards
wich can be disregarded in
some special cases only
60 1 Not recommended for "
packaging applications
Sulfuric Acid aqueous 70 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 70 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" 70 60 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
" 70 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
367
5032531 mm
368
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Sulfuryl Chloride 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
Superphosphate 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Syrups sugar 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
sugar 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Talcum Grease 20 9 " "
60 9 " "
Talcum Powder 20 9 " "
60 9 " "
369
reduced
370
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Tetrabromomethane 20 1 Not resistant; tensile Test specimen 1B Lupolex; Basell; Specimen:
(cont) strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Luflexen; Basell; Specimen:
5032531 mm
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
Tetrachloroethane 20 1 " " Luflexen; Basell; Specimen:
5032531 mm
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Tetrachloroethene 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
371
break unchanged 527-2
372
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Thioglycolic Acid (cont) 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Thionyl Chloride 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
20 1 " " Lupolex; Basell; Specimen:
5032531 mm
Thiophene 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
373
5032531 mm
374
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Tomato Juice (cont) 60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Tomato Sauce 20 9 " "
60 9 " "
Toothpaste 20 9 " "
60 9 " "
Transformer Oils insulating oil; 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
technical grade at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
insulating oil; 60 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
technical grade strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Tri-beta-Chloroethyl 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
Phosphate at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Tributyl Phosphate 20 9 " " Luflexen; Basell; Specimen:
375
60 9 " "
376
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Trichloroethene technical grade 20 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 20 1 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
technical grade 60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
" 60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Tricresyl Phosphate 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Triethanolamine aqueous any 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" " 20 9 " " Lupolex; Basell; Specimen:
377
378
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Trisodium Phosphate 20 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
(cont) at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Turkey Red Oil 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Turpentine 20 9 " "
synthetic 20 9 " "
varnish 20 9 " "
60 9 " "
synthetic 60 9 " "
varnish 60 9 " "
Turpentine Oil technical grade 20 7 Limited resistance; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 20 7 " " Lupolex; Basell; Specimen:
5032531 mm
" 60 1 Not resistant; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break greatly
reduced
379
380
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Vaseline Oil (cont) technical grade 20 7 Limited resistance; tensile Test specimen 1B Lupolex; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break slightly 527-2
reduced
" 60 7 " " Luflexen; Basell; Specimen:
5032531 mm
" 60 7 " " Lupolex; Basell; Specimen:
5032531 mm
Vegetable Oils 20 9 Resistant; tensile strength " Luflexen; Basell; Specimen:
at yield and elongation at 5032531 mm
break unchanged
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Vinegar wine vinegar; as 20 9 " " Luflexen; Basell; Specimen:
supplied commerc. 5032531 mm
" 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
wine vinegar; as 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
supplied commerc. at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Vinyl Acetate 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
381
382
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Water Distilled (cont) 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Water Glass 20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 9 " "
Waterproofing Cable mixture of mineral 70 16 4 Data from 1989 SPE ANTEC 6.3 87 Tensile yield Specimen: Density - 0.936;
Jelly oil, low mol. wgt. Conference Proceedings strength measured MI-0.35; 1 mm (0.04 in)
PE, SEBS; melting @ 50 mm/min per thick compression molded
point 67C ASTM D638 ASTM D638 specimen
straight chain 70 16 6 " 4.7 102 " "
paraffins;
naphthenic
structures; branched
isoparaffins
synthetic 70 16 7 " 1.7 95 " "
polyisobutene; drop
melting point 84C
mixture of mineral 70 64 4 " 6.5 87 " "
oil, low mol. wgt.
PE, SEBS; melting
point 67C
straight chain 70 64 5 " 5.6 105 " "
paraffins;
naphthenic
structures; branched
isoparaffins
383
384
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Wine Vinegar (cont) table vinegar; as 60 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
supplied commerc. at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
" 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Wines 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
Xylene 20 7 Limited resistance; tensile " Luflexen; Basell; Specimen:
strength at yield and 5032531 mm
elongation at break slightly
reduced
20 7 " " Lupolex; Basell; Specimen:
5032531 mm
20 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
60 1 Not resistant; tensile Test specimen 1B Luflexen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break greatly 527-2
reduced
60 1 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 Good resistance; the SABIC LLDPE; SABIC
product has no effect
Yeast 20 9 Resistant; tensile strength Test specimen 1B Luflexen; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
385
5032531 mm
386
%
% Retained
Temp. Time Change
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Test note Material note
(C) (days) Tensile
Weight Elong.
strength
Zinc Sludge (cont) 60 9 Resistant; tensile strength Test specimen 1B Lupolex; Basell; Specimen:
at yield and elongation at according to ISO 5032531 mm
break unchanged 527-2
Zinc Stearate 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
20 9 " " Lupolex; Basell; Specimen:
5032531 mm
60 9 " " Luflexen; Basell; Specimen:
5032531 mm
60 9 " " Lupolex; Basell; Specimen:
5032531 mm
Zinc Sulfate aqueous any 20 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 20 9 " " Lupolex; Basell; Specimen:
5032531 mm
" " 60 9 " " Luflexen; Basell; Specimen:
5032531 mm
" " 60 9 " " Lupolex; Basell; Specimen:
5032531 mm
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Acetaldehyde 100 21 5 Variable resistance - depends Sclair; DuPont Canada
on conditions; known stress
crack agent
100 60 2 Not recommended under any "
conditions; known stress crack
agent
aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
technical grade 20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Acetaldehyde/Acetic Acid 90/10 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Acetamide 20 9 " " "
Acetanilide 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
389
390
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Acetoacetic Acid 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Acetone technical grade 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
23 365 6 No change in appearance; 1.2 Tenite; Eastman; Specimen:
stress crack agent 50.8 mm (2 in) 3 3.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Acetophenone 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Acetylsalicylic Acid 20 9 " "
60 9 " "
391
9 Excellent resistance RTP 700 A; RTP Company
392
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Aliphatic Esters technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
" 60 1 Not resistant; tensile strength " "
at yield and elongation at
break greatly reduced
Allyl Acetate 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Allyl Alcohol 96 20 7 " " "
96 60 7 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 2 " " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Allyl Chloride 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
393
394
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Aluminum Fluoride (cont) all 60 8 Resistant; no indication that Sclair; DuPont Canada
concentrations serviceability would be
impaired
Aluminum Hydroxide 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Aluminum m-Phosphate 20 9 " " "
60 9 " " "
Aluminum Oxide 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Aluminum Sodium Sulfate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Aluminum Sulfate aqueous saturated 20 9 " " "
" " 60 9 " " "
solid 20 9 " " "
concentrated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
all 21 8 Resistant; no indication that Sclair; DuPont Canada
concentrations serviceability would be
impaired
all types 21 8 " "
solid 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
395
396
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Ammonium Carbonate 21 8 Resistant; no indication that Sclair; DuPont Canada
(cont) serviceability would be
impaired
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Ammonium Chloride aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 21 8 Satisfactory resistance Static Petrothene; Specimen:
solution conditions Unstressed specimen
" 21 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair
serviceability would be
impaired
" 21 8 " Sclair; DuPont Canada
" 60 8 Satisfactory resistance Static Petrothene; Specimen:
conditions Unstressed specimen
" 60 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
397
398
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Ammonium m-Phosphate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
Ammonium Nitrate aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
399
400
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Ammonium Thiocyanate saturated 60 8 Satisfactory resistance Static Petrothene; Quantum;
(cont) conditions Specimen: Unstressed
specimen
Amyl Acetate 100 21 2 Not recommended; suspected Sclair
stress crack agent; plasticizer
100 21 2 " Sclair; DuPont Canada
100 60 2 " Sclair
100 60 2 " Sclair; DuPont Canada
technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Specimen:
conditions Unstressed specimen
21 2 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
technical grade 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Specimen:
conditions Unstressed specimen
60 2 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Amyl Alcohol 100 21 6 Known stress crack agent; Sclair
401
402
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Aniline (cont) any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
dyes dry; 20 9 " "
-oil-soluble
dyes dry; -water- 20 9 " "
soluble
salts 20 9 " "
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 2 Unsatisfactory; possible stress " "
crack agent
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
dyes dry; 60 9 " "
-oil-soluble
dyes dry; 60 9 " "
-water-soluble
salts 60 9 " "
Aniline Hydrochloride aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
403
404
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Antifreeze (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Antimony 20 9 " "
60 9 " "
Antimony Chloride anhydrous 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 60 9 " " "
Antimony Pentachloride 20 9 " " "
60 9 " " "
Antimony Trichloride 20 9 " " "
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
Aqua Regia 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
20 1 Not recommended for SABIC LDPE; SABIC
packaging applications
21 2 Not recommended under any Sclair; DuPont Canada
conditions; oxidizer
405
ISO 527-2
406
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Ascorbic Acid (cont) 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Asphalt 20 9 " " "
60 7 Discoloration possible " "
Aspirin 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Atropine and its salts 20 9 " "
" 60 9 " "
Barium Carbonate saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Barium Chloride " 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
407
specimen
408
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Barium Sulfide (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Battery Acid 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Beef Tallow 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Beer 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
409
410
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Benzene (cont) 21 Sclair; DuPont Canada
21 2 Not recommended; suspected "
stress crack agent; plasticizer
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 2 Unsatisfactory resistance " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 Sclair; DuPont Canada
60 2 Not recommended; suspected "
stress crack agent; plasticizer
Benzene Hexachloride 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Benzenesulfonic Acid 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
411
412
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Bichromate Sulfuric Acid concentrated 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
20 3 Doubtful; application of PE as SABIC LDPE; SABIC
packaging material (bottles)
involves hazards wich can be
disregarded in some special
cases only
60 1 Not recommended for "
packaging applications
Bicycle Oil 20 9 Good resistance; the product "
has no effect
60 9 " "
Bismuth Carbonate saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Bismuth Salts 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Bismuth Trichloride 20 9 Good resistance; the product SABIC LDPE; SABIC
413
414
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Bleach Powder (cont) 60 5 Fair resistance; less suitable SABIC LDPE; SABIC
grades and unfavourable
conditions give rise to
difficulties
Blue Ashes 20 9 Good resistance; the product "
has no effect
60 9 " "
Bone Oil 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Borax aqueous saturated 20 9 " " "
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Boric Acid aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
solution 20 9 " "
concentrated 21 8 Satisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
dilute 21 8 " " "
415
Brillantine 20 9 " "
416
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
417
has no effect
418
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Butanediol (cont) 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 6 " " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Butanetriol aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
2-Butene-1,4-diol technical grade 20 9 " " "
Butter 20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 7 Suspected stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 7 Suspected stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Butyl Acetate n-butyl acetate 100 21 4 Suspected stress crack agent; "
plasticizer; resistance depends
on condit
" 100 60 2 Not recommended; suspected "
stress crack agent; plasticizer
technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
Butyl Acetate (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Butyl Acrylate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Butyl Alcohol n-butyl alcohol 100 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
" 100 60 6 " "
aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
butanol 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 " " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Butyl Benzyl Phthalate 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 7 " " "
Butyl Chloride 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Butyl Glycol technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
419
420
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Butyl Phenol technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Butyl Phenone technical grade 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
Butyl Phthalate " 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
" 60 7 " " "
Butylene Glycol " 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
" 60 9 " " "
2-Butyne-1,4-diol " 20 9 " " "
Butyraldehyde 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Butyric Acid aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
421
impaired
422
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Calcium Chlorate aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Calcium Chloride 2.5 23 365 9 No change in appearance 0 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
Saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
423
424
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Calcium Nitrate aqueous 50 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
50 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
50 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
aqueous 50 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
50 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
50 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Calcium Oxide powder 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
powder 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
425
426
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Camphor Oil 20 1 Not resistant; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break greatly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Cane Sugar Liquors aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
Caprolactam 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Carbazole 20 9 " "
60 9 " "
Carbolineum aqueous; for 20 7 Discoloration possible Test Lupolen; Basell; Specimen:
fruit trees specimen 1B 5032531 mm
according to
ISO 527-2
as supplied 20 7 Limited resistance; tensile " "
commerc. strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
aqueous; for 60 7 Discoloration possible Test Lupolen; Basell; Specimen:
fruit trees specimen 1B 5032531 mm
according to
ISO 527-2
427
428
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Carbon Monoxide (cont) 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
concentrated 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Carbon Tetrachloride 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Petrothene; Quantum;
Specimen: Unstressed
specimen
21 2 " Static "
conditions
21 2 Not recommended under any Sclair; DuPont Canada
conditions; plasticizer
23 365 2 Swelled; stress crack agent 37.9 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Petrothene; Quantum;
Specimen: Unstressed
429
Cellosolve 20 9 " "
430
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Cellosolve (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Cetyl Alcohol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Chloral Hydrate aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 7 Discoloration possible " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Chloramines aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Chloric Acid aqueous 1 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 1 60 9 " " "
" 10 20 9 " " "
Chlorine (cont) chlorine water; 2 60 8 Resistant; no indication that Sclair; DuPont Canada
saturated serviceability would be
solution impaired
dry gas 100 21 5 Resistant depends on use "
conditions; oxidizer
" 100 60 2 Not recommended under any "
conditions; oxidizer
aqueous solution saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
bleaching 20 7 Limited resistance; tensile " "
solution with strength at yield and
12.5% active elongation at break slightly
chlorine reduced
gaseous; dry 20 7 " " "
gaseous; moist 20 7 " " "
liquid 20 1 Not resistant; tensile strength " "
at yield and elongation at
break greatly reduced
liquid 21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
moist gas 21 5 Some attack " "
liquid 21 2 Not recommended under any Sclair; DuPont Canada
conditions; oxidizer
bleaching 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
solution with at yield and elongation at specimen 1B 5032531 mm
12.5% active break greatly reduced according to
chlorine ISO 527-2
gaseous; dry 60 1 " " "
gaseous; moist 60 1 " " "
liquid 60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
moist gas 60 2 " " "
liquid 60 2 Not recommended under any Sclair; DuPont Canada
conditions; oxidizer
Chlorine Water saturated 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
431
reduced ISO 527-2
432
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Chloroacetic Acid aqueous ,=85 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" ,=85 60 9 " " "
aqueous; mono any 20 9 " " "
mono; aqueous " 60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
mono 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 2 " " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Chloroacetic Acid Ethyl mono 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
Ester yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Chloroacetic Acid Methyl " 20 9 " " "
Ester
Chlorobenzene 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
433
60 9 " "
434
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Chlorosulfonic Acid 100 21 2 Not resistant; not Sclair; DuPont Canada
recommended under any
conditions
100 60 2 " "
technical grade 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
Chromate yellow 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
" 60 9 " "
Chromatic Acid 20 5 Fair resistance; less suitable "
grades and unfavourable
conditions give rise to
difficulties
60 1 Not recommended for "
packaging applications
Chrome Alum aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
435
436
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Cider (cont) 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Cinnamon 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Cinnamon Oil 20 9 " "
60 9 " "
Citric Acid 10 23 365 7 No change in appearance; 0 Tenite; Eastman; Specimen:
stress crack agent 50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
solution crack agent conditions Specimen: Unstressed
specimen
" 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
437
438
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Coconut Oil Alcohols technical grade 20 9 Resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation specimen 1B 5032531 mm
at break unchanged according to
ISO 527-2
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
technical grade 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Cod Liver Oil 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
439
specimen
440
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Copper Chloride (cont) saturated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Copper Cyanide aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Copper Fluoride 2 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
2 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
2 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
2 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
441
442
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Corn Oil (cont) 60 7 Suspected stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Cottonseed Oil technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
technical grade 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Cream face; hands 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
" 60 9 " "
Creolin 20 9 " "
443
444
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Cyclanone fatty alcohol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
sulphonate; as yield and elongation at break specimen 1B 5032531 mm
supplied unchanged according to
commerc. ISO 527-2
Cyclohexane 20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Cyclohexanol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 6 Satisfactory; possible stress Static Petrothene; Specimen:
crack agent conditions Unstressed specimen
21 6 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 6 Satisfactory; possible stress Static Petrothene; Specimen:
crack agent conditions Unstressed specimen
60 6 " " Petrothene; Quantum;
Specimen: Unstressed
445
446
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Detergents (cont) synthetic 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
" 21 6 Known stress crack agent; Sclair
otherwise no indication of
impaired service
" 21 6 " Sclair; DuPont Canada
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
synthetic 60 6 Satisfactory; possible stress Static Petrothene; Specimen:
crack agent conditions Unstressed specimen
" 60 6 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
liquid 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
powder 60 9 " "
synthetic 60 6 Known stress crack agent; Sclair
otherwise no indication of
impaired service
" 60 6 " Sclair; DuPont Canada
Developing Solutions photographic 20 7 Discoloration possible Test Lupolen; Basell; Specimen:
specimen 1B 5032531 mm
according to
ISO 527-2
" 60 7 " " "
Dextrin aqueous 18 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
447
448
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Dibutyl Ether (cont) 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
Dibutyl Phthalate technical grade 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 5 Some attack Static Petrothene; Specimen:
conditions Unstressed specimen
21 5 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
21 6 Resistant depends on use Sclair
conditions; suspected stress
crack agent
21 6 " Sclair; DuPont Canada
60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 5 Some attack Static Petrothene; Specimen:
conditions Unstressed specimen
60 5 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 7 Suspected stress crack agent; Sclair
otherwise no indication of
449
450
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
1,2-Dichloroethane (cont) 23 365 3 Swelled; stress crack agent 6.9 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 2 Not recommended; suspected Sclair; DuPont Canada
stress crack agent; plasticizer
Dichloroethane 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 1 " " "
1,1-Dichloroethylene technical grade 20 1 " " "
" 60 1 " " "
Dichloroethylene 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Dichloropropane 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 1 " " "
Dichloropropene 20 1 " " "
451
452
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Diethylene Dioxide 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Diethylene Glycol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
453
454
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Dimethylamine (cont) 60 2 Not resistant; not Sclair; DuPont Canada
recommended under any
conditions
Dimethylformamide technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
technical grade 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Dinonyl Phthalate DNP; technical 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
grade strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
Dioctyl Phthalate 20 7 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 2 Unsatisfactory resistance " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Diphenyl Ether 20 9 " "
60 9 " "
Diphenyl Oxide 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
455
456
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Dolomite 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Dyes 20 7 Discoloration possible Test Lupolen; Basell; Specimen:
specimen 1B 5032531 mm
according to
ISO 527-2
60 7 " " "
Eau de Cologne 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Eau de Javelle 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 5 Fair resistance; less suitable SABIC LDPE; SABIC
grades and unfavourable
conditions give rise to
difficulties
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 1 Not recommended for SABIC LDPE; SABIC
packaging applications
Eau de Labarraque 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 1 Not resistant; tensile strength " "
at yield and elongation at
break greatly reduced
457
458
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Ethyl Acetate (cont) 100 60 2 Not recommended; suspected Sclair; DuPont Canada
stress crack agent; plasticizer
technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
23 365 6 No change in appearance; 2.8 Tenite; Eastman; Specimen:
possible stress crack agent 50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Ethyl Alcohol 35 21 6 Satisfactory; possible stress Static Petrothene; Quantum
crack agent conditions
35 21 6 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
35 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
459
460
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Ethyl Chloride technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 2 Not recommended under any Sclair; DuPont Canada
conditions; plasticizer
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 2 Not recommended under any Sclair; DuPont Canada
conditions; plasticizer
Ethyl Ether technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
Ethylaniline 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Ethylbenzene technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
461
462
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Ethylene Glycol (cont) 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 6 Satisfactory; possible stress Petrothene; Quantum;
crack agent Specimen: Unstressed
specimen
60 6 " Static "
conditions
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Ethylene Glycol Butyl Ether technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Ethylene Glycol Ethyl 23 365 8 No change in appearance; 0.3 Tenite; Eastman; Specimen:
possible stress crack agent 50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
Ethylene Salicylate 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Ethylenediamine technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
technical grade 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
463
464
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Fermentation Mixture ethyl alcohol 1 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
(cont) acetic acid; as yield and elongation at break specimen 1B 5032531 mm
used in unchanged according to
production ISO 527-2
Ferric Alum saturated 20 9 " " "
aqueous " 60 9 " " "
Ferric Chloride " any 20 9 " " "
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Ferric Nitrate aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
465
60 9 " "
466
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
467
468
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Formamide (cont) 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Formic Acid aqueous 10 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 10 60 9 " " "
20 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
20 60 6 " " "
50 21 6 " " "
50 60 6 " " "
aqueous 85 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 85 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
all 21 8 Resistant; no indication that Sclair; DuPont Canada
concentrations serviceability would be
impaired
469
470
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Fruit Pulp 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 7 Suspected stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 7 Suspected stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Fuel Oils 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
domestic use 20 9 " "
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
471
specimen
472
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Gallic Acid (cont) saturated 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
" 60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Galvanizing Liquor 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Gamma Radiation 5 Fair resistance RTP 700 A; RTP Company
Gas Liquor 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Gases manufactured; 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
as supplied yield and elongation at break specimen 1B 5032531 mm
commerc. unchanged according to
ISO 527-2
473
ISO 527-2
474
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Glucose (cont) aqueous any 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
saturated 21 8 " " "
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
saturated 21 8 " "
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
saturated 60 8 " " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
saturated 60 8 " "
Glues 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
fish; bone 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
475
unchanged according to
ISO 527-2
%
476
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Glycolic Acid (cont) aqueous up to 70 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Glycolic Acid Butyl Ester 20 9 " " "
Glycols aqueous; as 20 9 " " "
supplied
commerc.
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
aqueous; as 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
supplied yield and elongation at break specimen 1B 5032531 mm
commerc. unchanged according to
ISO 527-2
60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Glysantin 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
477
60 9 " " "
%
478
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Hydrobromic Acid (cont) aqueous 50 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
50 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
50 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
gaseous; 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
technical grade yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Hydrocarbons 5 Fair resistance RTP 700 A; RTP Company
Hydrochloric Acid 10 21 8 Satisfactory resistance Static Petrothene; Quantum
conditions
10 21 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
10 23 365 9 No change in appearance 20.2 Tenite; Eastman
10 23 365 9 " 20.2 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
10 60 8 Satisfactory resistance Static Petrothene; Quantum
conditions
10 60 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
30 21 8 " " Petrothene; Quantum
30 21 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
30 60 8 " " Petrothene; Quantum
30 60 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
35 21 8 " " Petrothene; Quantum
35 21 8 " " Petrothene; Quantum;
479
Specimen: Unstressed
specimen
%
480
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
481
482
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Hydrofluoric Acid (cont) 60 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
75 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
75 60 5 Some attack " "
aqueous 40]85 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 40]85 60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Hydrofluorosilicic Acid 32 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
32 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
32 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
32 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
483
specimen
484
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
485
impaired
%
486
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
487
tincture 60 9 " "
488
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Iodine (cont) in Kl solution 60 2 Not recommended under any Sclair; DuPont Canada
conditions; oxidizer
Isoamyl Alcohol technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Isobutyl Alcohol 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Isobutyric Acid technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Isooctane 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
Isopropyl Acetate (cont) 100 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Isopropyl Alcohol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
technical grade 20 9 " " "
" 60 9 " " "
60 9 " " "
Isopropyl Ether technical grade 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Jams 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Kerosene 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
489
has no effect
490
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Kerosene (cont) 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Ketones 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 1 Not resistant; tensile strength " "
at yield and elongation at
break greatly reduced
Lactic Acid 10 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
10 60 6 " " "
90 21 6 " " "
90 60 6 " " "
aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Lactose milk sugar 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
491
specimen
492
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Lead Acetate (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Lead Nitrate 21 8 " "
60 8 " "
Lead Oxide 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Lemon Oil 20 9 " "
60 9 " "
Lime 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Lime Milk 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Lime Slaked 20 9 " "
60 9 " "
Lime Unslaked 20 9 " "
60 9 " "
Lime Water 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Linseed Oil (cont) technical grade 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Lithium Bromide 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Lotion hair; shaving 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
" 60 9 " "
Lubricating Oils 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
lube oil 21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
technical grade 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
lube oil 60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Machining Oils 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Magnesia 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
493
494
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Magnesium Carbonate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
Magnesium Chloride aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Magnesium Fluosilicate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
495
496
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Maleic Acid (cont) 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 " " "
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Malic Acid aqueous 50 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Manganese Sulfate 20 9 " " "
Margarine 20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Mash 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Mayonnaise 20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
m-Cresol 20 9 " "
60 9 " "
Menthol 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
497
Methoxybutyl Alcohol 20 9 " " "
498
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Methyl Acetate technical grade 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Methyl Acrylate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Methyl Alcohol 5 23 365 9 0 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
5 23 365 7 No change in appearance; 0 "
stress crack agent
100 21 Sclair; DuPont Canada
100 21 6 Known stress crack agent; "
otherwise no indication of
impaired service
100 60 "
100 60 6 Known stress crack agent; "
otherwise no indication of
impaired service
20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
technical grade 20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
499
%
500
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Methyl Ethyl Ketone (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Methyl Glycol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Methyl Isobutyl Ketone 20 9 " " "
Methyl Methacrylate 20 9 " " "
Methyl Propyl Ketone 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Methyl Salicylate 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Methyl Sulfuric Acid 50 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 6 " " "
4-Methyl-2-Pentanol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Methylamine aqueous 32 20 9 " " "
Methylene Chloride (cont) 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Petrothene; Quantum;
Specimen: Unstressed
specimen
21 2 " Static "
conditions
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Petrothene; Quantum;
Specimen: Unstressed
specimen
60 2 " Static "
conditions
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Milk 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Mineral Oil Wax 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Mineral Oils without 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
additives yield and elongation at break specimen 1B 5032531 mm
unchanged according to
501
ISO 527-2
502
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Mineral Oils (cont) 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 5 Resistant depends on use Sclair; DuPont Canada
conditions; plasticizer
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 2 Not recommended under any Sclair; DuPont Canada
conditions; plasticizer
Mohr's Salt 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Molasses 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
wort 20 9 " " "
commercial 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
503
%
504
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
505
%
506
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Nickel Salts aqueous 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Nickel Sulfate " any 20 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
concentrated 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
saturated 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
concentrated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Nicotine 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
dilute 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
" 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
" 60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
507
specimen
%
508
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
509
has no effect
510
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Octane (cont) n-octane 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Octyl Alcohol 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Octyl Cresol technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 2 Unsatisfactory resistance " "
Oleic Acid 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
concentrated 21 5 " " "
23 365 6 No change in appearance; 2.4 Tenite; Eastman; Specimen:
possible stress crack agent 50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
511
512
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Oxalic Acid (cont) saturated 21 6 Known stress crack agent; Sclair; DuPont Canada
solution otherwise no indication of
impaired service
dilute 60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
saturated 60 8 Satisfactory resistance " "
solution
solid or solution 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 60 6 Known stress crack agent; Sclair; DuPont Canada
solution otherwise no indication of
impaired service
Oxygen 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
Ozone 0.005 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
21 5 Some attack Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 2 Unsatisfactory resistance " "
Paints emulsion 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
513
has no effect
514
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Pepper (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Peppermint Oil 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Perchloric Acid 10 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
10 60 8 " " "
aqueous 20 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 50 20 9 " " "
" 70 20 9 " " "
solution 20 5 Fair resistance; less suitable SABIC LDPE; SABIC
grades and unfavourable
conditions give rise to
difficulties
" 60 3 Doubtful; application of PE as "
packaging material (bottles)
involves hazards wich can be
disregarded in some special
cases only
Perchloroethylene 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
515
Phenoxyacetic Acid 20 9 " "
516
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Phenoxyacetic Acid (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Phenylethyl Alcohol 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Phenylhydrazine technical grade 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Phenylhydrazine 20 9 Resistant; tensile strength at " "
Hydrochloride yield and elongation at break
unchanged
Phenylphenol 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Phenylsulfonate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Phosphates aqueous any 20 9 " " "
liquor for metal 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
" 60 9 " "
Phosphoric Acid 30 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
30 60 8 " " "
aqueous 50 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
517
518
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Photographic Solutions emulsion; as 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
supplied yield and elongation at break specimen 1B 5032531 mm
commerc. unchanged according to
ISO 527-2
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
photographic 21 6 Satisfactory; possible stress " "
emulsions crack agent
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
photographic 21 6 Known stress crack agent; "
emulsions otherwise no indication of
impaired service
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
photographic 60 6 Satisfactory; possible stress " "
emulsions crack agent
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
photographic 60 6 Known stress crack agent; "
emulsions otherwise no indication of
impaired service
Phthalic Acid aqueous 50 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
519
indium 21 8 Satisfactory resistance " "
520
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Plating Solutions (cont) lead 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
nickel 21 6 " " "
rhodium 21 6 " " "
brass 21 6 " " "
cadmium 21 6 " " "
chromium 21 2 Unsatisfactory; possible stress " "
crack agent
silver 21 6 Satisfactory; possible stress " "
crack agent
tin 21 6 " " "
zinc 21 6 " " "
tin 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
zinc 21 6 " "
brass 21 6 " "
cadmium 21 6 " "
copper 21 6 " "
gold 21 6 " "
lead 21 6 " "
nickel 21 6 " "
silver 21 6 " "
brass 60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
cadmium 60 6 " " "
521
has no effect
522
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Potash (cont) caustic 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
patent 20 9 " "
60 9 " "
caustic 60 9 " "
patent 60 9 " "
Potassium Aluminum aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
Sulfate yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 60 9 " " "
Potassium Bicarbonate aqueous saturated 20 9 " " "
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium Bisulfate aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
523
524
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Potassium Carbonate (cont) 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium Chlorate aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium Chloride aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
525
526
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Potassium Dichromate 40 60 8 Resistant; no indication that Sclair; DuPont Canada
(cont) serviceability would be
impaired
aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
Potassium Ferricyanide " " 20 9 " " "
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium Ferrocyanide aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
Potassium Fluoride (cont) aqueous any 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium Hydroxide 20 21 8 Satisfactory resistance Petrothene; Quantum;
Specimen: Unstressed
specimen
20 21 8 " Static "
conditions
20 60 8 " "
20 60 8 " Static "
conditions
solution 50 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" 50 60 9 " " "
aqueous any 20 9 " " "
" " 60 9 " " "
20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
concentrated 21 8 Satisfactory resistance Petrothene; Quantum;
Specimen: Unstressed
specimen
" 21 8 " Static "
conditions
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
527
impaired
528
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Potassium Hydroxide (cont) 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
concentrated 60 8 Satisfactory resistance Petrothene; Quantum;
Specimen: Unstressed
specimen
" 60 8 " Static "
conditions
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
concentrated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium Hypochlorite aqueous saturated 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
" " 60 1 Not resistant; tensile strength " "
at yield and elongation at
break greatly reduced
Potassium Iodide " any 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Potassium Nitrate aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
529
530
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Potassium Permanganate 20 21 8 Satisfactory resistance Static Petrothene; Quantum;
(cont) conditions Specimen: Unstressed
specimen
20 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
20 60 7 Discoloration possible Test Lupolen; Basell; Specimen:
specimen 1B 5032531 mm
according to
ISO 527-2
20 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
20 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
aqueous up to 6 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 7 Discoloration possible " "
20 5 Fair resistance; less suitable SABIC LDPE; SABIC
grades and unfavourable
conditions give rise to
difficulties
60 5 " "
Potassium Persulfate aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
Potassium Phosphate aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
Potassium Sulfate " any 20 9 " " "
" " 60 9 " " "
concentrated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium Sulfide aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
concentrated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
concentrated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
531
532
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Potassium Sulfite aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
concentrated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Potassium aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
Tetracyanocuprate yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
Potassium Thiosulfate " " 20 9 " " "
" " 60 9 " " "
Propargyl Alcohol " 7 20 9 " " "
" 7 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
533
534
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
535
536
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Salad Sauce 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Salicylaldehyde 20 9 " "
60 9 " "
Salicylic Acid 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Salt Brine saturated 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 " " "
Saponin 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
537
specimen
538
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Shortening (cont) 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Silicic Acid aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 8 " " "
Silicone emulsion; as 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
supplied yield and elongation at break specimen 1B 5032531 mm
commerc. unchanged according to
ISO 527-2
Silicone Oil technical grade 20 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
technical grade 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
539
ISO 527-2
540
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Soaps (cont) 60 6 Satisfactory; possible stress Static Petrothene; Specimen:
crack agent conditions Unstressed specimen
60 6 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
soft; green and 60 9 Good resistance; the product SABIC LDPE; SABIC
yellow has no effect
solution; all 60 6 Known stress crack agent; Sclair
concentrations otherwise no indication of
impaired service
" 60 6 " Sclair; DuPont Canada
Soda aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
caustic; solution " 20 9 " " "
aqueous " 60 9 " " "
caustic; solution " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
caustic 20 9 " "
60 9 " "
caustic 60 9 " "
Sodium Acetate aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
541
542
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
543
544
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Sodium Carbonate (cont) concentrated 60 8 Resistant; no indication that Sclair
serviceability would be
impaired
" 60 8 " Sclair; DuPont Canada
Sodium Chlorate aqueous saturated 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
Sodium Chloride 10 23 365 9 No change in appearance 0 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
545
546
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Sodium Dichromate (cont) saturated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Sodium 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
Dodecylbenzenesulfonate yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Sodium Ferricyanide aqueous saturated 20 9 " " "
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
" 60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Sodium Ferrocyanide 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
547
solid 20 9 " " "
548
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Sodium Hydroxide (cont) 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
concentrated 21 8 Satisfactory resistance Static Petrothene; Quantum
conditions
" 21 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
solid 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
concentrated 60 8 Satisfactory resistance Static Petrothene; Quantum
conditions
" 60 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
concentrated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Sodium Hypochlorite 5 23 365 9 No change in appearance 0 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
aqueous with 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
12.5% active strength at yield and specimen 1B 5032531 mm
chlorine elongation at break slightly according to
549
550
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Sodium Perchlorate aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
Sodium Peroxide " 10 20 9 " " "
" 10 60 9 " " "
" saturated 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Sodium Phosphate " " 20 9 Resistant; tensile strength at " "
yield and elongation at break
unchanged
" " 60 9 " " "
Sodium Silicate " any 20 9 " " "
" " 60 9 " " "
20 9 " " "
60 9 " " "
Sodium Sulfate aqueous cold saturated 20 9 " " "
" " 60 9 " " "
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
551
552
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Soya Oil 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Soybean Oil 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
Spermaceti 20 7 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Spindle Oil 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Spirits 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Stain Removers 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
553
impaired service
554
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Stearic Acid (cont) 100 60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Strong Acids 7 Good resistance RTP 700 A; RTP Company
Strong Alkalis 9 Excellent resistance "
Styrene 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
555
556
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Sulfur Trioxide 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
20 3 Doubtful; application of PE as SABIC LDPE; SABIC
packaging material (bottles)
involves hazards wich can be
disregarded in some special
cases only
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 8 " " "
60 1 Not recommended for SABIC LDPE; SABIC
packaging applications
Sulfuric Acid 3 23 365 9 No change in appearance 0 Tenite; Eastman
3 23 365 9 " 0 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
30 23 365 9 " 0 Tenite; Eastman
30 23 365 9 " 0 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
50 21 8 Satisfactory resistance Static Petrothene; Quantum
conditions
50 21 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
50 60 8 " " Petrothene; Quantum
557
558
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Sulfuric Acid (cont) 96 60 2 Unsatisfactory resistance Static Petrothene; Quantum
conditions
96 60 2 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
96 60 2 Not recommended under any Sclair; DuPont Canada
conditions; oxidizer
aqueous 98 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
98 21 5 Some attack Static Petrothene; Quantum
conditions
98 21 5 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
concentrated 98 21 5 Resistant depends on use Sclair; DuPont Canada
conditions; oxidizer
aqueous 98 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
98 60 2 Unsatisfactory resistance Static Petrothene; Quantum
conditions
98 60 2 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
concentrated 98 60 2 Not recommended under any Sclair; DuPont Canada
conditions; oxidizer
0]50 21 8 Resistant; no indication that "
serviceability would be
impaired
559
560
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Sulfurous Acid 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Sulfuryl Chloride 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
Superphosphate 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Syrups sugar 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
561
has no effect
562
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Tannin (cont) 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Tanning Extracts vegetable; as 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
supplied yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Tanning Solutions tanning extracts 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
" 60 6 " " "
Tar 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
oil 20 9 " "
60 9 " "
oil 60 9 " "
Tartaric Acid 10 21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
10 60 8 " " "
aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
saturated 21 2 Unsatisfactory resistance Static Petrothene; Quantum;
solution conditions Specimen: Unstressed
specimen
" 60 2 " " "
563
ISO 527-2
564
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Tetrahydrofuran (cont) 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 2 Not recommended for service; Sclair; DuPont Canada
plasticizer; suspected stress
crack agent
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 2 Not recommended for service; Sclair; DuPont Canada
plasticizer; suspected stress
crack agent
Tetrahydronaphthalene technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
" 60 1 Not resistant; tensile strength " "
at yield and elongation at
break greatly reduced
Tetralin 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Thermal Air Aging 70 16 8 Data from 1989 SPE ANTEC 107 Tensile yield Specimen: Density - 0.924,
Conference Proceedings strength MI-0.25, 1 mm (0.04 in) thick
565
specimen
566
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Titanium Tetrachloride saturated 60 2 Not recommended under any Sclair; DuPont Canada
(cont) conditions; possible stress
crack agent
Toluene technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Quantum
conditions
21 2 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
21 2 Not recommended for service; Sclair; DuPont Canada
plasticizer; suspected stress
crack agent
23 365 3 Swelled; possible stress crack 15.1 Tenite; Eastman
agent
23 365 3 " 15.1 Tenite; Eastman; Specimen:
50.8 mm (2 in)33.2 mm
(0.125 in) thick injection
molded discs, 0.918 density
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 2 Unsatisfactory resistance Static Petrothene; Quantum
conditions
60 2 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
567
unchanged
568
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Trichloroacetic Acid (cont) aqueous 50 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
technical grade 20 7 Limited resistance; tensile " "
strength at yield and
elongation at break slightly
reduced
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
technical grade 60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Trichlorobenzene 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
break greatly reduced according to
ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Trichloroethane 20 9 " "
60 9 " "
Trichloroethene technical grade 20 1 Not resistant; tensile strength Test Lupolen; Basell; Specimen:
at yield and elongation at specimen 1B 5032531 mm
569
ISO 527-2
570
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
571
572
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Turpentine Oil technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
" 60 1 Not resistant; tensile strength " "
at yield and elongation at
break greatly reduced
Urea 30 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
30 60 6 " " "
0]30 21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
0]30 60 8 " "
aqueous up to 33 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 9 " "
Uric Acid 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 9 " " "
Urine 20 9 " " "
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
UV Weathering (cont) 4 9 Data from 1989 SPE ANTEC 99 Specimen: LDPE with no
Conference Proceedings additives
10 6 " 80 Specimen: LDPE with
photodegradable additive
10 9 " 95 Specimen: LDPE with no
additives
Vanilla extract 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
vanilla extract 21 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
" 21 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
" 60 6 Satisfactory; possible stress Static Petrothene; Quantum;
crack agent conditions Specimen: Unstressed
specimen
extract 60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
vanilla extract 60 6 Known stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Varnish cellulose 20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
" 60 9 " "
Vaseline technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
technical grade 60 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
Vaseline Oil technical grade 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
" 60 7 " " "
573
574
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Vegetable Oils 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
Vinegar wine vinegar; as 20 9 " " "
supplied
commerc.
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
wine vinegar; as 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
supplied yield and elongation at break specimen 1B 5032531 mm
commerc. unchanged according to
ISO 527-2
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be
impaired
Vinyl Acetate 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
60 7 Limited resistance; tensile " "
575
576
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Waterproofing Cable Jelly straight chain 70 16 5 Data from 1989 SPE ANTEC 6.2 102 Tensile yield Specimen: Density - 0.924,
(cont) paraffins; Conference Proceedings strength MI-0.25, 1 mm (0.04 in) thick
naphthenic measured @ compression molded ASTM
structures; 50 mm/min D638 specimen
branched per ASTM
isoparaffins D638
synthetic 70 16 6 " 2.6 96 " "
polyisobutene;
drop melting
point 84C
mixture of 70 64 4 " 10 85 " "
mineral oil, low
mol. wgt. PE,
SEBS; melting
point 67C
straight chain 70 64 5 " 7 104 " "
paraffins;
naphthenic
structures;
branched
isoparaffins
synthetic 70 64 6 " 3.2 97 " "
polyisobutene;
drop melting
point 84C
mixture of 70 180 4 " 9.5 86 " "
mineral oil, low
mol. wgt. PE,
SEBS; melting
point 67C
straight chain 70 180 5 " 7.2 105 " "
paraffins;
naphthenic
structures;
577
578
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Wine Vinegar as supplied 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
commerc. yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
table vinegar; as 60 9 " " "
supplied
commerc.
Wines 20 9 " " "
21 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 7 Suspected stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
60 8 Satisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
60 7 Suspected stress crack agent; Sclair; DuPont Canada
otherwise no indication of
impaired service
Xylene 20 7 Limited resistance; tensile Test Lupolen; Basell; Specimen:
strength at yield and specimen 1B 5032531 mm
elongation at break slightly according to
reduced ISO 527-2
20 9 Good resistance; the product SABIC LDPE; SABIC
has no effect
21 2 Unsatisfactory resistance Static Petrothene; Quantum;
conditions Specimen: Unstressed
specimen
21 2 Not recommended under any Sclair; DuPont Canada
conditions; plasticizer
23 365 3 Swelled; possible stress crack 15.4 Tenite; Eastman; Specimen:
579
580
%
% Retained
Exp. medium Temp. Time Change
Exposure medium Conc. (%) PDL # Resistance note Test note Material note
note (C) (days) Tensile
Weight Elong.
strength
Zinc Carbonate (cont) 60 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
saturated 60 8 Resistant; no indication that Sclair; DuPont Canada
serviceability would be impaired
Zinc Chloride aqueous any 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
unchanged according to
ISO 527-2
" " 60 9 " " "
saturated 21 8 Satisfactory resistance Static Petrothene; Specimen:
solution conditions Unstressed specimen
" 21 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
" 21 8 Resistant; no indication that Sclair
serviceability would be
impaired
" 21 8 " Sclair; DuPont Canada
" 60 8 Satisfactory resistance Static Petrothene; Specimen:
conditions Unstressed specimen
" 60 8 " " Petrothene; Quantum;
Specimen: Unstressed
specimen
" 60 8 Resistant; no indication that Sclair
serviceability would be
impaired
" 60 8 " Sclair; DuPont Canada
Zinc Oxide 20 9 Resistant; tensile strength at Test Lupolen; Basell; Specimen:
yield and elongation at break specimen 1B 5032531 mm
581
7. Polyethylene, HDPE
Chapter Outline:
7.1 Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Accelerated Atlas Weather-Ometer 30 4 71 Tensile properties Marlex; Phillips;
Weathering under standard ASTM tested at strain rate Specimen: Natural color,
D1499 conditions of 50.8 mm/min ASTM D638, type IV
(2 in/min) tensile specimen, 0.95
density
" 60 1 41 " "
" 80 1 9 " "
" .250 9 100 Marlex; Phillips;
Specimen: ASTM D638,
type IV tensile specimen,
0.95 density
Acetaldehyde 40 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
40 15]25 9 " Cestidur; Quadrant EPP
40 15]25 9 " Cestilene; Quadrant EPP
40 15]25 9 " Cestilite; Quadrant EPP
w/10% AcOH 90 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
with 10% acetic acid 90 20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
100 21 5 Variable resistance ] Sclair; DuPont Canada
depends on conditions;
known stress crack
agent
583
584
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acetaldehyde (cont) technical grade 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
21 8 Satisfactory resistance Fortiflex; Solvay
tech. 60 60 4 Limited resistance 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
all concs. 60 60 4 " 3]8 0.5]5 .50 "
60 60 5 " 3]5 0.5]5 .50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 5 Some attack Fortiflex; Solvay
technical grade 60 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
and elongation at break 527-2
slightly reduced
60 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
Acetaldehyde/Acetic 90/10 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
Acid strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Acetamide 50 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical use
50 15]25 9 " Cestidur; Quadrant EPP
50 15]25 9 " Cestilene; Quadrant EPP
Polyethylene, HDPE
50 15]25 9 " Cestilite; Quadrant EPP
20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
585
suitable for practical use
586
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
10 15]25 9 " Cestilene; Quadrant EPP
10 15]25 9 " Cestilite; Quadrant EPP
20 60 9 " Cesticolor; Quadrant EPP
20 60 9 " Cestidur; Quadrant EPP
20 60 9 " Cestilene; Quadrant EPP
20 60 9 " Cestilite; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acetic Acid (cont) 20 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
20 15]25 9 " Cestidur; Quadrant EPP
20 15]25 9 " Cestilene; Quadrant EPP
20 15]25 9 " Cestilite; Quadrant EPP
30 15]25 9 " Cesticolor; Quadrant EPP
30 15]25 9 " Cestidur; Quadrant EPP
30 15]25 9 " Cestilene; Quadrant EPP
30 15]25 9 " Cestilite; Quadrant EPP
50 20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
50 23 1 7 Good resistance Latene HD; LATI Industria
Termoplastici S.p.a.
50 60 1 5 Fair resistance "
50 60 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
50 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
50 15]25 9 " Cestidur; Quadrant EPP
50 15]25 9 " Cestilene; Quadrant EPP
50 15]25 9 " Cestilite; Quadrant EPP
60 21 8 Satisfactory resistance Fortiflex; Solvay
60 21 6 Known stress crack Sclair; DuPont Canada
agent; otherwise no
indication of impaired
service
60 60 5 Some attack Fortiflex; Solvay
60 60 5 Variable resistance - Sclair; DuPont Canada
depends on conditions;
known stress crack
agent
70 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese
587
588
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
80 15]25 9 " Cestidur; Quadrant EPP
80 15]25 9 " Cestilene; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
589
Celanese
590
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acetic Acid (cont) 100 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
100 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
technical grade 100 20 9 " " "
100 60 60 4 Limited resistance/ 3]8 0.5]5 .50 Hostalen; Hoechst
possible discoloration Celanese
100 60 60 4 " 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
glacial, tech. 100 60 60 4 " 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese
" 100 60 60 4 " 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
100 60 60 4 Limited resistance; 3]5 0.5]5 .50 Hostalen HMW; Hoechst
discolors Celanese
100 60 60 4 " 3]5 0.5]5 .50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
100 60 7 Discoloration possible Test specimen 1B Lupolen; Basell; Specimen:
according to ISO 5032531 mm
527-2
Polyethylene, HDPE
technical grade 100 60 7 " " "
100 9 Specimen is resistant; Polystone G; Rchling
swelling ,3% or weight Engineered Plastics
loss ,0.5%; break
elongation not
significantly altered
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acetic Acid (cont) 80]100 27]65 0]90 7 Excellent resistance; Bottles stored Marlex; Phillips
,3% permeability loss/ 4 months @ 27C
year; possible stress to determine
cracking permeability
80]100 27]65 0]90 7 " " Marlex; Phillips;
Specimen: ASTM D638
bars for chemical
resistance, 4 oz Boston
round bottles for
permeability
glacial 20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
" 60 9 " "
glacial, technically pure 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese
" 20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
with ethyl alcohol, 20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
fermentation mixture, Celanese
concentrated
" 20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
21 8 Satisfactory resistance Fortiflex; Solvay
23 7 5 79 LNP Engineering Plastics;
Filler: 30% Glass fiber
23 7 5 79 LNP Engineering Plastics;
Filler: 30% Glass fiber;
Specimen: ASTM D1822
tensile impact samples
23 7 5 79 Flexural stress LNP Engineering Plastics;
Filler: 30% Glass fiber
23 7 5 79 " LNP Engineering Plastics;
Filler: 30% Glass fiber;
Specimen: ASTM D1822
tensile impact samples
591
592
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acetic Acid (cont) glacial 27 90 7 0.81 113 99.6 Tensile properties Marlex; Phillips
tested at strain rate
of 508 mm/min
(20 in/min)
" 27 90 7 0.81 113 99.6 " Marlex; Phillips;
Specimen: 25.4350.8 mm
(132 in) for weight
change
" 49 90 7 0.73 139.1 96.6 " Marlex; Phillips
" 49 90 7 0.73 139.1 96.6 " Marlex; Phillips;
Specimen: 25.4350.8 mm
(132 in) for weight
change
glacial, technically pure 60 60 7 Resistant; discolors ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese
" 60 60 7 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
with ethyl alcohol, 60 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
fermentation mixture, Celanese
concentrated
" 60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 5 Some attack Fortiflex; Solvay
glacial 66 90 7 0.39 143.5 99 Tensile properties Marlex; Phillips
tested at strain rate
of 508 mm/min (20
in/min)
" 66 90 7 0.39 143.5 99 " Marlex; Phillips;
Specimen: 25.4350.8 mm
Polyethylene, HDPE
(132 in) for weight
change
27]65 0]90 7 Excellent resistance; Bottles stored Marlex; Phillips
,3% permeability loss/ 4 months @ 27C
year; possible stress to determine
cracking permeability
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acetic Acid (cont) 27]65 0]90 7 Excellent resistance; Bottles stored Marlex; Phillips;
,3% permeability loss/ 4 months @ 27C Specimen: ASTM D638
year; possible stress to determine bars for chemical
cracking permeability resistance, 4 oz Boston
round bottles for
permeability
Acetic Acid Ethyl 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Ester Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 "
Acetic Anhydride 20 60 8 " ,3 ,0.5 .85 "
technical grade 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
21 8 Satisfactory resistance Fortiflex; Solvay
21 2 Not recommended Sclair; DuPont Canada
under any conditions;
possible stress crack
agent
60 60 4 Limited resistance; 3]5 0.5]5 .50 Hostalen HMW; Hoechst
discolors Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 8 Satisfactory resistance Fortiflex; Solvay
technical grade 60 7 Discoloration possible Test specimen 1B Lupolen; Basell; Specimen:
according to ISO 5032531 mm
527-2
60 9 Good resistance; SABIC HDPE; SABIC
the product has
no effect
60 2 Not recommended Sclair; DuPont Canada
under any conditions;
possible stress crack
agent
593
594
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
50 15]25 9 " Cesticolor; Quadrant EPP
50 15]25 9 " Cestidur; Quadrant EPP
50 15]25 9 " Cestilene; Quadrant EPP
50 15]25 9 " Cestilite; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acetone (cont) 100 9 Specimen is resistant; Polystone G; Rchling
swelling ,3% or weight Engineered Plastics
loss ,0.5%; break
elongation not
significantly altered
undiluted 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
tech. 20 60 8 " ,3 ,0.5 "
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
technical grade 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
21 8 Satisfactory resistance Fortiflex; Solvay
23 1 2 Poor resistance; loss of Latene HD; LATI Industria
mechanical properties; Termoplastici S.p.a.
swelling
60 1 2 " "
60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
595
596
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
DIN 53455
20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
597
DIN 53455
598
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
immersed specimen under
static conditions
" 60 8 " Fortiflex; Solvay
" 60 8 " Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
599
600
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Acrylonitrile (cont) technical grade 60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
Adipic Acid aqueous saturated 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
satd. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
saturated 20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 9 Good resistance; SABIC HDPE; SABIC
the product has
no effect
21 8 Satisfactory resistance Fortiflex; Solvay
satd. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
saturated 60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
Polyethylene, HDPE
DIN 53455
60 8 Satisfactory resistance Fortiflex; Solvay
60 9 Good resistance; SABIC HDPE; SABIC
the product has
no effect
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
601
602
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
unchanged
NH2Cl 1 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
603
DIN 53455
604
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Aliphatic Esters technically pure 60 60 7 Limited resistance to ,3 ,0.5 .85 Hostalen HMW; Hoechst
(cont) resistance Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
technical grade 60 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
and elongation at break 527-2
slightly reduced
Allyl Acetate 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 60 4 Resistant/limited ,8 ,5 .50 Hostalen; Hoechst
resistance Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 7 Limited resistance to ,3 ,0.5 .85 Hostalen HMW; Hoechst
resistance Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
Polyethylene, HDPE
and elongation at break 527-2
slightly reduced
Allyl Alcohol 96 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
605
606
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Allyl Chloride undiluted 15]25 2 Not resistant; after a Cesticolor; Quadrant EPP
short time, the material
is seriously affected
(considerable reduction
of the mechanical
strength and changes in
weight); using the
material under these
conditions is not
recommended
" 15]25 2 " Cestidur; Quadrant EPP
" 15]25 2 " Cestilene; Quadrant EPP
" 15]25 2 " Cestilite; Quadrant EPP
20 60 4 Limited resistance 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 5 " 3]5 0.5]5 .50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
and elongation at break 527-2
slightly reduced
60 60 2 Not resistant .8 .5 0]50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 3 " .8 .5 ,50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
Polyethylene, HDPE
press-molded sheets to
DIN 53455
60 1 Not resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
greatly reduced
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Aluminum Alum aqueous any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
all types 20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
" 60 9 " "
Aluminum Chloride 10 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
10 15]25 9 " Cestidur; Quadrant EPP
10 15]25 9 " Cestilene; Quadrant EPP
10 15]25 9 " Cestilite; Quadrant EPP
100 9 Specimen is resistant; Polystone G; Rchling
swelling ,3% or weight Engineered Plastics
loss ,0.5%; break
elongation not
significantly altered
aqueous any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
saturated 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
aqueous change in weight; small
solution effect on mechanical
properties; generally
suitable for practical
use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
aq., all concs. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
solid 20 60 8 " ,3 ,0.5 "
607
608
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
solid 60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
concentrated 60 8 Satisfactory resistance Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
609
610
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Aluminum Fluoride concd. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
(cont) Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
concentrated 60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 8 Satisfactory resistance Fortiflex; Solvay
" 60 8 " Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
all concentrations 60 8 Resistant; no indication Sclair; DuPont Canada
that serviceability
would be impaired
Aluminum Hydroxide saturated 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
aqueous change in weight; small
solution effect on mechanical
properties; generally
suitable for practical
use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
Polyethylene, HDPE
(23130.04 in) from
press-molded sheets to
DIN 53455
20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
611
unchanged
612
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Aluminum Oxide 20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
60 9 " "
Aluminum Potassium aq., all concs. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Sulfate Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
aq., all concs. 60 60 8 " ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Aluminum Salts 20 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
20 15]25 9 " Cestidur; Quadrant EPP
20 15]25 9 " Cestilene; Quadrant EPP
20 15]25 9 " Cestilite; Quadrant EPP
saturated 50 9 " Cesticolor; Quadrant EPP
Polyethylene, HDPE
aqueous
solution
" 50 9 " Cestidur; Quadrant EPP
" 50 9 " Cestilene; Quadrant EPP
" 50 9 " Cestilite; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
613
" " 60 9 " " "
614
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
would be impaired
all types 21 8 " "
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
615
616
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Amino Acids (cont) 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
2-Aminoethanol ethanolamine, tech. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
Polyethylene, HDPE
(23130.04 in) from
press-molded sheets to
DIN 53455
technical grade 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonia 10 23 1 7 Good resistance Latene HD; LATI Industria
Termoplastici S.p.a.
10 60 1 7 " "
20 60 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
liquid 20 60 9 " "
20 60 9 " Cestidur; Quadrant EPP
liquid 20 60 9 " "
20 60 9 " Cestilene; Quadrant EPP
liquid 20 60 9 " "
20 60 9 " Cestilite; Quadrant EPP
liquid 20 60 9 " "
gas 20 15]25 9 " Cesticolor; Quadrant EPP
liquid 20 15]25 9 " "
gas 20 15]25 9 " Cestidur; Quadrant EPP
liquid 20 15]25 9 " "
gas 20 15]25 9 " Cestilene; Quadrant EPP
liquid 20 15]25 9 " "
gas 20 15]25 9 " Cestilite; Quadrant EPP
liquid 20 15]25 9 " "
50 23 1 7 Good resistance Latene HD; LATI Industria
Termoplastici S.p.a.
50 60 1 7 " "
dry gas 100 21 8 Resistant; no indication Sclair; DuPont Canada
that serviceability
would be impaired
" 100 60 8 " "
100 9 Specimen is resistant; Polystone G; Rchling
swelling ,3% or weight Engineered Plastics
loss ,0.5%; break
elongation not
significantly altered
water any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
617
618
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonia (cont) water any 60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
liquid undiluted 70 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
" " 70 9 " Cestidur; Quadrant EPP
" " 70 9 " Cestilene; Quadrant EPP
" " 70 9 " Cestilite; Quadrant EPP
" 15]25 9 " Cesticolor; Quadrant EPP
liquid " 15]25 9 " "
" 15]25 9 " Cestidur; Quadrant EPP
liquid " 15]25 9 " "
" 15]25 9 " Cestilene; Quadrant EPP
liquid " 15]25 9 " "
" 15]25 9 " Cestilite; Quadrant EPP
liquid " 15]25 9 " "
aq., all concs. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
gas 20 60 8 " ,3 ,0.5 "
liquefied 20 60 8 " ,3 ,0.5 "
gaseous 20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
liquefied 20 60 8 " ,3 ,0.5 .85 "
Polyethylene, HDPE
solution 20 60 8 " ,3 ,0.5 .85 "
ammonia water 20 60 8 " ,3 ,0.5 .85 "
solution
gaseous 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonia (cont) liquid 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
dry gas 21 8 Satisfactory resistance Fortiflex; Solvay
" 21 8 " Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
gas 60 60 8 " ,3 ,0.5 "
ammonia water 60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
solution Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
gaseous 60 60 8 " ,3 ,0.5 .85 "
solution 60 60 8 " ,3 ,0.5 .85 "
dry gas 60 8 Satisfactory resistance Fortiflex; Solvay
gaseous 60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
dry gas 60 8 Satisfactory resistance Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
60 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
Ammoniacal Liquor gases liquor 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 .85 "
619
620
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonium Acetate aqueous any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
saturated 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
aqueous change in weight; small
solution effect on mechanical
properties; generally
suitable for practical
use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
aq., all concs. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
21 8 Satisfactory resistance Fortiflex; Solvay
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
60 8 Satisfactory resistance Fortiflex; Solvay
Ammonium aqueous saturated 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
Bicarbonate strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonium saturated 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
Bicarbonate (cont) aqueous change in weight; small
solution effect on mechanical
properties; generally
suitable for practical
use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
satd. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 "
Ammonium Bromide 21 8 Satisfactory resistance Fortiflex; Solvay
60 8 " "
Ammonium 10 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
Carbonate change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
10 15]25 9 " Cestidur; Quadrant EPP
10 15]25 9 " Cestilene; Quadrant EPP
10 15]25 9 " Cestilite; Quadrant EPP
aqueous any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
saturated 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
aqueous change in weight; small
solution effect on mechanical
properties; generally
suitable for practical
use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
621
622
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
would be impaired
Ammonium Chloride 10 60 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical use
10 60 9 " Cestidur; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
623
DIN 53455
624
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonium Chloride 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Specimen:
(cont) 5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 9 Good resistance; SABIC HDPE; SABIC
the product has
no effect
saturated solution 21 8 Satisfactory resistance Fortiflex
" 21 8 " Fortiflex; Solvay
" 21 8 " Marlex; Specimen:
Unstressed immersed
specimen under static
conditions
" 21 8 " Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
" 21 8 Resistant; no indication Sclair
that serviceability
would be impaired
" 21 8 " Sclair; DuPont Canada
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 Hostalen; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
Polyethylene, HDPE
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
625
626
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
DIN 53455
aq., all concs. 60 60 8 " ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonium 60 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Hydrosulfide (cont) Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Ammonium 1 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
Hydroxide change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
1 15]25 9 " Cestidur; Quadrant EPP
1 15]25 9 " Cestilene; Quadrant EPP
1 15]25 9 " Cestilite; Quadrant EPP
10 21 Sclair; DuPont Canada
10 21 8 Resistant; no indication "
that serviceability
would be impaired
10 23 1 7 Good resistance Latene HD; LATI Industria
Termoplastici S.p.a.
10 60 1 7 " "
10 60 Sclair; DuPont Canada
10 60 8 Resistant; no indication "
that serviceability
would be impaired
10 81 3 2 58 LNP Engineering Plastics;
Filler: 30% Glass fiber;
Specimen: ASTM D1822
tensile impact samples
10 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
10 15]25 9 " Cestidur; Quadrant EPP
10 15]25 9 " Cestilene; Quadrant EPP
10 15]25 9 " Cestilite; Quadrant EPP
28 21 Sclair; DuPont Canada
28 21 8 Resistant; no indication "
that serviceability
627
would be impaired
628
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
23 7 1 46 Flexural stress "
all concs. 60 60 9 ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
629
unchanged
630
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
631
" 10 15]25 9 " Cestilite; Quadrant EPP
632
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonium aqueous any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
Phosphate (cont) strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
aq., all concs. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
21 8 Satisfactory resistance Fortiflex; Solvay
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 8 Satisfactory resistance Fortiflex; Solvay
Ammonium Salts 10 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
10 15]25 9 " Cestidur; Quadrant EPP
10 15]25 9 " Cestilene; Quadrant EPP
Polyethylene, HDPE
10 15]25 9 " Cestilite; Quadrant EPP
Ammonium Sulfate fertilizer 10 15]25 9 " Cesticolor; Quadrant EPP
" 10 15]25 9 " Cestidur; Quadrant EPP
" 10 15]25 9 " Cestilene; Quadrant EPP
" 10 15]25 9 " Cestilite; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonium Sulfate aqueous any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
(cont) strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" " 60 9 " " "
aq., all concs. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
saturated solution 21 8 Satisfactory resistance Fortiflex; Solvay
" 21 8 " Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
" 21 8 Resistant; no indication Sclair; DuPont Canada
that serviceability
would be impaired
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
saturated solution 60 8 Satisfactory resistance Fortiflex; Solvay
" 60 8 " Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
" 60 8 Resistant; no indication Sclair; DuPont Canada
that serviceability
would be impaired
633
634
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
static conditions
aq., all concs. 60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
635
DIN 53455
636
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ammonium 60 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Thiocyanate (cont) Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
saturated 60 8 Satisfactory resistance Fortiflex; Solvay
60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
saturated 60 8 Satisfactory resistance Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
Amyl Acetate 100 21 2 Not recommended; Sclair
suspected stress crack
agent; plasticizer
100 21 2 " Sclair; DuPont Canada
100 60 2 " Sclair
100 60 2 " Sclair; DuPont Canada
undiluted 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
tech. 20 60 8 Resistant ,3 ,0.5 Hostalen; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 20 60 8 " ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
Polyethylene, HDPE
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Amyl Acetate (cont) 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
technical grade 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
21 5 Some attack Fortiflex
21 5 " Fortiflex; Solvay
27 90 3 3.31 204.3 89.4 Tensile properties Marlex; Specimen:
tested at strain rate 25.4350.8 mm(132 in)
of 508 mm/min for weight change
(20 in/min)
27 90 3 3.31 204.3 89.4 " Marlex; Phillips;
Specimen: 25.4350.8 mm
(132 in) for weight
change
tech. 60 60 8 Resistant ,3 ,0.5 Hostalen; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 2 Unsatisfactory Fortiflex
637
resistance
638
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
pentanol 20 60 8 " ,3 ,0.5 .85 "
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Amyl Alcohol (cont) 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
pentanol 20 60 8 " ,3 ,0.5 .85 "
20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
technical grade 20 9 " " "
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
21 8 Satisfactory resistance Fortiflex
21 8 " Fortiflex; Solvay
tech. 60 60 8 Resistant ,3 ,0.5 Hostalen; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 8 Satisfactory resistance Fortiflex
60 8 " Fortiflex; Solvay
technical grade 60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
639
640
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
100 60 1 Not resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
greatly reduced
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
641
DIN 53455
642
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Amyl Phthalate 60 60 5 Limited resistance 3]5 0.5]5 .50 Hostalen HMW; Hoechst
(cont) Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
and elongation at break 527-2
slightly reduced
Aniline 100 21 2 Not recommended Sclair; DuPont Canada
under any conditions;
plasticizer; stress crack
agent
100 60 4 Known stress crack "
agent; plasticizer;
variable resistance
100 9 Specimen is resistant; Polystone G; Rchling
swelling ,3% or weight Engineered Plastics
loss ,0.5%; break
elongation not
significantly altered
any 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
" 60 9 " " "
undiluted 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
all concs. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
Polyethylene, HDPE
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
643
(20 in/min) change
644
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
lard 60 8 Satisfactory resistance Fortiflex; Solvay
" 27]65 0]90 6 Possible container Bottles stored Marlex; Phillips;
distortion/stress 4 months @ 27C Specimen: ASTM D638
cracking; ,3% to determine bars for chemical
permeability loss/year permeability resistance, 4 oz Boston
round bottles for
permeability
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Animal Oils 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 60 4 Limited resistance 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 5 " 3]5 0.5]5 .50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
and elongation at break 527-2
slightly reduced
Anise Oil 20 60 4 Limited resistance 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 5 " 3]5 0.5]5 .50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
21 5 Some attack Fortiflex; Solvay
645
646
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Anise Oil (cont) 60 60 2 Not resistant .8 .5 0]50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 3 " .8 .5 ,50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 2 Unsatisfactory Fortiflex; Solvay
resistance
Aniseed 20 60 4 Limited resistance 3]8 0.5]5 .50 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
and elongation at break 527-2
slightly reduced
oil 20 7 " " "
" 20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
60 60 5 Limited resistance/Not .3 .0.5 .0 Hostalen; Hoechst
resistant Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 1 Not resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
greatly reduced
oil 60 1 " " "
" 60 9 Good resistance; the SABIC HDPE; SABIC
Polyethylene, HDPE
product has no effect
Anisole 20 60 5 Limited resistance 3]5 0.5]5 .50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
647
648
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
(23130.04 in) from
press-molded sheets to
DIN 53455
antifreeze agents; 20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Specimen:
vehicles; usual 5032531 mm
commercial (23130.04 in) from
concentration press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Antifreeze (cont) antifreeze agents; 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
vehicles; usual Celanese; Specimen:
commercial 5032531 mm
concentration (23130.04 in) from
press-molded sheets to
DIN 53455
automotive; as supplied 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
commerc. strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
20 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
vehicles, usual com. 60 60 8 Resistant ,3 ,0.5 Hostalen; Specimen:
conc. 5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
antifreeze agents; 60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Specimen:
vehicles; usual 5032531 mm
commercial (23130.04 in) from
concentration press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
automotive; as supplied 60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
commerc. strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 9 Good resistance; the SABIC HDPE; SABIC
product has no effect
Antimony 20 9 " "
60 9 " "
Antimony Chloride anhydrous 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
649
unchanged
650
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Antimony Chloride anhydrous 60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
(cont) strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Antimony 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Pentachloride Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Antimony Trichloride 10 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
Polyethylene, HDPE
suitable for practical
use
10 15]25 9 " Cestidur; Quadrant EPP
10 15]25 9 " Cestilene; Quadrant EPP
10 15]25 9 " Cestilite; Quadrant EPP
50 50 9 " Cesticolor; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
651
652
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Antimony Trichloride 60 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
(cont) Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
anhydrous 60 60 8 " ,3 ,0.5 .85 "
60 8 Satisfactory resistance Fortiflex; Solvay
60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 8 Satisfactory resistance Marlex; Phillips;
Specimen: Unstressed
immersed specimen under
static conditions
Anyl Acetate tech. 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
" 60 60 8 " ,3 ,0.5 "
Aqua Regia 10 23 1 2 Poor resistance; loss of Latene HD; LATI Industria
mechanical properties; Termoplastici S.p.a.
swelling
10 60 1 2 " "
10 75 1 2 " "
50 23 1 2 " "
50 60 1 2 " "
50 75 1 2 " "
undiluted 15]25 2 Not resistant; after a Cesticolor; Quadrant EPP
short time, the material
is seriously affected
(considerable reduction
of the mechanical
strength and changes in
Polyethylene, HDPE
weight); using the
material under these
conditions is not
recommended
" 15]25 2 " Cestidur; Quadrant EPP
" 15]25 2 " Cestilene; Quadrant EPP
" 15]25 2 " Cestilite; Quadrant EPP
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Aqua Regia (cont) 20 60 3 Not resistant .8 .5 ,50 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
20 1 Not resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
greatly reduced
20 1 Not recommended for SABIC HDPE; SABIC
packaging applications
21 5 Some attack Fortiflex; Solvay
21 2 Not recommended Sclair; DuPont Canada
under any conditions;
oxidizer
60 2 Unsatisfactory Fortiflex; Solvay
resistance
60 1 Not recommended for SABIC HDPE; SABIC
packaging applications
60 2 Not recommended Sclair; DuPont Canada
under any conditions;
oxidizer
27]65 0]90 1 Attacked @ ambient Bottles stored 4 Marlex; Phillips;
temperature; ,3% months @ 27C to Specimen: ASTM D638
permeability loss/year determine bars for chemical
permeability resistance, 4 oz Boston
round bottles for
permeability
Argon undiluted 15]25 9 Resistant; little or no Cesticolor; Quadrant EPP
change in weight; small
effect on mechanical
properties; generally
suitable for practical
use
" 15]25 9 " Cestidur; Quadrant EPP
" 15]25 9 " Cestilene; Quadrant EPP
" 15]25 9 " Cestilite; Quadrant EPP
Aromatic Acids 20 60 8 Resistant ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
653
654
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
Aromatic Oils 20 7 Limited resistance; Test specimen 1B Lupolen; Basell; Specimen:
tensile strength at yield according to ISO 5032531 mm
and elongation at break 527-2
slightly reduced
60 1 Not resistant; tensile " "
strength at yield and
elongation at break
greatly reduced
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
655
press-molded sheets to
DIN 53455
656
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Polyethylene, HDPE
DIN 53455
20 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
Polyethylene, HDPE
% Change % Retained
Temp. Time
Exposure medium Exp. medium note Conc. (%) PDL # Resistance note Tensile Test note Material note
(C) (days) Vol. Weight Elong.
strength
Ascorbic Acid (cont) 20 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
60 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 60 8 " ,3 ,0.5 .85 Hostalen HMW; Hoechst
Celanese; Specimen:
5032531 mm
(23130.04 in) from
press-molded sheets to
DIN 53455
60 9 Resistant; tensile Test specimen 1B Lupolen; Basell; Specimen:
strength at yield and according to ISO 5032531 mm
elongation at break 527-2
unchanged
Asphalt 20 60 8 Resistant ,3 ,0.5 Hostalen; Hoechst
Celanese; Specimen: