Professional Documents
Culture Documents
11
Ordering Information
22
Ductile Iron The Material of Choice
Saint-Gobain PAM UK offers the most comprehensive range of ductile iron pipe
systems for use in both potable water and sewerage application in the UK. Being at
the forefront of innovation means that its customers continuously receive state-of-the-
art products and top class services. At the same time all products and facilities are
subject to stringent quality controls and conform to relevant BS, EN and ISO standards.
2.0
if future demands change from specifications today.
1.5
1.0
Structural Design: Ductile Iron Guarantees Safety
0.5
As a result of the ductility of the material, which gives a high capacity for absorbing
0
Ductile PVC PE Steel GRP work or energy, Saint-Gobain ductile iron pipes and fittings have a high safety margin,
Iron
allowing the opportunity to operate at up-rated pressures in the future.
600 The inherent structural strength of the pipe guarantees durability and reliability for
Measured Pipes
500 bursting long term service.
pressure
Pressure (bars)
400
The high factor of safety of ductile iron gives continued performance even if future
300
demands change, for example through increased usage from housing developments.
200
Working The inherent material strength of ductile iron compensates for unforeseen
100 pressure
environmental changes, for example change of land use or ground settlement.
0
200 400 600 800 1000 1200 1400 1600
DN Easy to design and specify
Excellent resistance to second comer damage
600
Measured No long term reduction in pipe stiffness
500 bursting Fittings
pressure
Ductile iron takes the risk out of pipeline design
Pressure (bars)
400
300
200
Working
100 pressure
0
100 150 200 250 300 350 400
DN
33
High strength and stiffness
Ductile iron is suitable for installation in open fields or high traffic load areas and can
be laid at a variety of depths. The high material strength minimises the need for
imported bedding and surround, hence minimising the impact on the environment.
Can be laid in narrow and/or shallow trenches
Can be laid at a wide range of depths with no detrimental effect on the
performance of the pipe
Minimises risk due to unforeseen site hazards, such as second-comer damage
Depth of Cover
Maximum
8.1
8.2
8.4
8.5
8.6
8.7
8.8
8.9 DN700-800 DN900-1000 DN1200-1400
DN600 DN1600-2000
DN500
DN300 DN400
10.6
DN200
14.6
DN150
44
Reducing Failure Rates: Ductile Iron assured long term
reliability
Reducing Failure Rates: Ductile Iron assured long term
Through a continual programme of developments and innovations the failure rates of
reliability
ductile iron systems consistently reduce compared to alternative materials.
Through a continual programme of developments and innovations the failure rates of
ductile iron systems consistently reduce compared to alternative materials.
Reliable long term solution
Reliable long term solution
Reducing
Failure
Can adapt toCan
future Rates:
changes
adapt to
Ductile
in external
future changes in external load
load
Iron assured long term
0.25
No. of failures by material type (per km per year)
0.15
0.2 0.1
0..35
0.05
0.15
0.3 0
Grey Iron Ductile Iron Steel PE
0.1
No. of Failures / (km x year)
0
0.15 Grey Iron & Testing:
Ductile Iron Steel PE
Installation Trunk Install
Mains TestFailure
Average and Rates
Forget
Saint-Gobain PAM UK offers pipe systems which have well proven and highly
0.1 KEY140
engineered 1997
jointing solutions. These jointing solutions are able to withstand the
Source: DGVW Study
)
rigours of installation, testing and provide long term reliability once in service.
Failure Rates (Nr per 1000Km per annum
118.3
120
0.05
2000
The Rapid push-fit joint is simple and robust and provides high flexibility in both
100
application and installation
Simple
80 jointing techniques, for easy installation
0 68.5 69
Testing ductile iron pipe systems is simple, once passed there is no need to repeat
60Grey Iron Ductile Iron Steel
test at a later time. Install, Test and Forget, requires less supervision on-site.
PE
Installation40 &solutions
Jointing Testing:
30.1
1997
37.2
Install
which allows
38.2
Test the
installation whatever and Forget
weather conditions
KEY
No specialist equipment required
20 UK offers pipe systems which have well proven and highly Source: DGVW Study
Saint-Gobain PAM
Capable of angular deflection and axial withdrawal, providing opportunity to reduce
engineered jointing
the0number of2000
solutions.
fittingsThese
required.jointing solutions are able to withstand the
DI CI Steel PE PVC GRP
rigours of installation, testing and
Caters for unforeseen groundprovide
movementslong term reliability once in service.
Pipe Material Group Source: UKWIR Report 09/WM/08/39
The Rapid push-fit joint is simple and robust and provides high flexibility in both
Jointing
The Rapidsolutions
push-fitwhich
joint isallows
simpleinstallation
and robustwhatever the weather
and provides conditions
high flexibility in both
No specialistand
application equipment required
installation
Capablejointing
Simple of angular deflection
techniques, forand axial
easy withdrawal, providing opportunity to reduce
installation
the number of fittings required.
Testing ductile iron pipe systems is simple, once passed there is no need to repeat
Caters
test at for unforeseen
a later ground
time. Install, Testmovements
and Forget, requires less supervision on-site.
Jointing solutions which allows installation whatever the weather conditions
No specialist equipment required
Capable of angular deflection and axial withdrawal, providing opportunity to reduce
the number of fittings required.
Caters for unforeseen ground movements
55
Hydraulic Flow: Ductile Iron gives constant
performance
The nominal bore of ductile iron pipe remains constant regardless of pressure
requirements. Ductile iron pipe internal bore is clear: for example DN200 = 200mm
internal bore, regardless of pressure required.
Hydraulic flow characteristics are not altered by pressure increases or decreases
An increase in working pressure does not mean an increase in diameter requirement
66
Sectio1
Section
Full Project Life
Support
77
Section 1: Full Project Life Support
Technical
Technical ServicesServices
To ensure
To ensure cost effective costSaint-Gobain
solutions effective solutions
PAM UK Saint-Gobain PAM UK
offers full project lifeoffers full project life
support support
support
from soil
from early design advice, early designand
surveys advice, soil surveys
drawing and
take-offs todrawing take-offs
on-site support to on-site support and
and
installation
installation certification certification
for contractors for contractors and engineers.
and engineers.
Savings Savings
Technical Support: Technical Support:
Drawing Take-Off Drawing Take-Off
Savings
Savings
Savings Savings
Onsite-Support: Onsite-Support:
Induct Plus Induct Plus
Logistics Logistics
Design Phase Design Phase Phase
Installation Installation Phase
PipeSpec
PipeSpec Design Design Software
Software
PipeSpec is a design PipeSpec
software is a design
too software
developed tool
too developed
by Saint-Gobain PAMbyUK Saint-Gobain
as a supportPAM
toolUK as a support tool
to assist engineers intothe
assist engineers
design in the design
and specification and specification
of pipeline schemes.of Thepipeline schemes. The software
software
features
features five analytical fivecan
tools that analytical toolsthroughout
be utilised that can bethe
utilised throughout
planning the planning and design
and design
stages of the project: stages of the project:
Hydraulics - Full Pipe
Hydraulics - Full Pipe
Hydraulics
Hydraulics - Part-full Pipe - Part-full Pipe
Embedment Embedment
Anchorage Anchorage
Installed Cost Installed Cost
PAMCAD
PAMCAD Design Design Software
Software
Tospecifiers
To assist engineers and assist engineers and specifiers
in the creation in the creation
and modification of aand modification
pipework design,of
a a pipework design, a
complete database ofcomplete database
water pipeline of water
products pipeline The
is available. products is available.
software enablesThe software enables accurate
accurate
drawings
drawings to be produced quicklytoand
be produced quicklyup
easily by calling and easily by
pipeline calling up pipeline
components and components and
arranging them on screen.
arranging them on screen.
Benefits: Benefits:
Benefits:
Enables pipe runs l Enables
to Enables
be drawn pipe
pipe runs and
runs
quickly to be
to beeasily
drawn quickly and easily
Make-up pipe
l Make-up
Make-up pipe facility
pipe facility
facility
Use of
l Use
Use of standard products
oftostandard
minimiseproducts minimise
cost andtolead time cost
minimise cost and
and lead
lead time
time
Automatically allows Automatically
joint gaps allows joint gaps
l Automatically gaps
l Bill
Bill ofgives
Bill of materials function
materials function
a clearfunction gives
gives aaclear
list of products usedlist
clear listofofproducts
productsused
used
Download
Download PAMCAD free PAMCAD
of charge free of charge at www.saint-gobain-pam.co.uk/watersewer
at www.saint-gobain-pam.co.uk/watersewer
Download PAMCAD free of charge at www.saint-gobain-pam.co.uk/watersewer
/wscad.cfm.
/wscad.cfm. Alternatively Alternatively
a CD-ROM a CD-ROM
is available is available
via our request via our
brochure tabrequest
on the brochure tab on the
/wscad.cfm. Alternatively a CD-ROM is available from the Brochure Hotline,
website. website.
Tel: 0800 028 2134.
88
Drawing
Drawing
Take-off
Take-off
Service
Service
A teamA of
team
experienced
of experienced
engineers
engineers
is ableistoable
carry
toout
carry
drawing
out drawing
take-offs,
take-offs,
providing
providing
a a
detailed
detailed
list of list
products
of products
required.
required.
The service
The service
includes
includes
optimisation
optimisation
of design
of design
to ensure
to ensure
that the
that
most
the cost-effective
most cost-effective
solution
solution
is achieved.
is achieved.
Saint-Gobain
Saint-Gobain
PAM UKPAMhasUKthe
has
facility
the facility
to accept
to accept
drawings
drawings
in electronic
in electronic
format.format.
PleasePlease
consider
consider
the following
the following
instructions
instructions
for usefor
of use
thisof
facility:
this facility:
All drawings
All drawings
to be compatible
to be compatible
with AutoCAD2002/2004
with AutoCAD2002/2004
All drawings
All drawings
sent tosent
relate
to relate
only toonly
pipework
to pipework take-off
for off-take
for off-take
All drawings
All drawings
to be clean,
to be clean,
i.e. drawings
i.e. drawings
to fill the
to fill
whole
the whole
screenscreen
in a reasonable
in a reasonable
and and
printable
printable
size size
To avoid
To delays
avoid delays
in dealing
in dealing
with requests,
with requests,
pleaseplease
ensureensure
that the
that
relevant
the relevant
sections
sections
of of
the specification
the specification
are sent
areatsent
the at
same
the time
sameastime
the as
drawings,
the drawings,
either either
by mail
byormail
e-mail.
or e-mail.
Technical
Technical
Support
Support
Helpline
Helpline
A technical
A technical
support
support
helpline
helpline
is available
is available
to all existing
to all existing
and potential
and potential
customers,
customers,
staffedstaffed
by an experienced
by an experienced
team of
team
engineers
of engineers
offering
offering
a broada broad
range range
of expertise
of expertise
and advice
and advice
on: on:
Product
Product
and material
and material
compatibility
compatibility
Installation
Installation
and testing
and testing
Embedment
Embedment
and hydraulic
and hydraulic
flow calculations
flow calculations
Regulatory
Regulatory
requirements
requirements
PleasePlease
call our
call
Technical
our Technical
Sales Department,
Sales Department,
Tel: 0115
Tel:930
01150650/0700
930 0650/0700
or email
or email
technical.pipes.uk.pam@saint-gobain.com
technical.pipes.uk.pam@saint-gobain.com
Induct
Induct PlusPlus
This scheme,
This scheme,
offeredoffered
by Saint-Gobain
by Saint-Gobain
PAM UK, PAMaims
UK,to
aims
givetoconfidence
give confidence
to water
to water
utilities
utilities
and contractors
and contractors
that pipes
that and
pipes
fittings
and fittings
will bewill
installed
be installed
effectively
effectively
and inand in
optimum optimum
condition.
condition.
The scheme
The scheme
offers offers
contractors
contractors
hands-on
hands-on
training
training
in handling,
in handling,
storing,storing,
installing
installing
and commissioning
and commissioning
Saint-Gobain
Saint-Gobain
PAM UK PAM ductile
UK ductile
iron pipes
iron and
pipes and
fittings.
fittings.
A process
A process
of on-site
of on-site
evaluation
evaluation
and assessment
and assessment
of actual
of actual
installation
installation
is usedisto
used to
support support
the certification
the certification
of contractors
of contractors
successfully
successfully
completing
completing
the scheme.
the scheme.
For more
For information
more information
on theon installation
the installation
of ductile
of ductile
iron pipes,
iron pipes,
fittingsfittings
and valves,
and valves,
pleaseplease
refer torefer
the to
Installation
the Installation
Guide Guide www.saint-gobain-pam.co.uk
at www.saint-gobain-pipelines.co.uk.
at www.saint-gobain-pipelines.co.uk. This set
This
of set of
instructions
instructions
is based
is based
on bestonpractices
best practices
which which
are acknowledged
are acknowledgedwithinwithin
the industry.
the industry.
This guide
This guide
providesprovides
clear and
clearconcise
and concise
guidance
guidance
for thefor
installation
the installation
of ductile
of ductile
iron iron
pipelines
pipelines
from delivery
from delivery
through through
to on-site
to on-site
commissioning
commissioningand is and
designed
is designed
to ensure
to ensure
that the
that
performance
the performance
of ductile
of ductile
iron pipes
iron and
pipesfittings
and fittings
is not adversely
is not adversely
affected
affected
duringduring
installation.
installation.
PleasePlease
call our
call
Technical
our Technical
Sales Department,
Sales Department,
Tel: 0115
Tel:930
01150650/0700
930 0650/0700
or email
or email
technical.pipes.uk.pam@saint-gobain.com
technical.pipes.uk.pam@saint-gobain.com
9 99
Section 1: Full Project Life Support
Section
Section
Soil Surveys
Soil Surveys
1: 1:FullFull
Our soil assessment procedure has been awarded independent approval by WRc.
conditions, allowing the most appropriate external protection system to be specified.
Please contact Technical S
Project
Our soil assessment procedure has been awarded independent approval by WRc.
0650/0700.
Please contact Technical Sales Department for more information, Tel: 0115 930
0650/0700.
Please contact Technical Sales Department for more information, Tel: 0115 930
LifeLife
0650/0700.
Quality Assurance
Quality Assurance
Support
detailed
Saint-Gobain PAM UK regards quality as essential to the success of its business. metallurgical an
From
liningand
detailed metallurgical analysis of the molten metal to tight control of coating applications, proced
Saint-Gobain PAM UK regards quality as essential to the success of its business. From
lining applications, procedures have been developed to ensure consistent of each
high individual pipe an
quality
detailed metallurgical analysis of the molten metal to tight control of coating and
tested in accordance with
of each individual pipe and fitting. Additionally, every pipe and fitting is pressure
lining applications, procedures have been developed to ensure consistent high quality
tested in accordance with BS EN 545/BS EN 598.
of each individual pipe and fitting. Additionally, every pipe and fitting is pressure
The quality-is-key princi
tested in accordance with BS EN 545/BS EN 598.
The quality-is-key principle applies to every stage of the manufacturing includes:
process and
includes: Validation of suppliers
The quality-is-key principle applies to every stage of the manufacturing process and
Validation of suppliers and/or their materials Continuous assessmen
includes:
Continuous assessment of quality systems On-going monitoring o
Validation of suppliers and/or their materials
On-going monitoring of product quality Technical support prior
Continuous assessment of quality systems
Technical support prior to and after sales On-time delivery of pro
On-going monitoring of product quality
On-time delivery of products and supporting information
Technical support prior to and after sales
On-time delivery of products and supporting information
FM 129
FM 12908
PT/231/0404
FM 12908
PT/231/0404
Compliance with
Compliance with Standards
Saint-Gobain PAM UK pro
Compliance with Standards British, European and Inte
Saint-Gobain PAM UK products comply with and are tested according to relevant
under the quality manage
British, European and International Standards. All pipes and fittings are manufactured
Saint-Gobain PAM UK products comply with and are tested according to relevant
under the quality management system BS EN ISO 9001, 2000.
British, European and International Standards. All pipes and fittings are manufactured
All Saint-Gobain PAM UK
under the quality management system BS EN ISO 9001, 2000. to the latest version of BS
All Saint-Gobain PAM UK ductile iron pipes and fittings for water application conform
to the latest version of BS EN 545 and for sewer applications they conform version
to theof BS EN 598. Dev
latest
All Saint-Gobain PAM UKsductile
ductileiron
ironpipes
pipesand
andfittings
fittingsfor
for water
water application conform PAM UK Pip
Saint-Gobain
version of BS EN 598. Development of pipes and fittings can take place across the
to the latest version of BS EN 545 and for sewer applications they conform to the latest
achieved with the relevan
Saint-Gobain PAM UK Pipe Division. As such, third party accreditation is always
version of BS EN 598. Development of pipes and fittings can take place across France theand MPA-NRW in G
achieved with the relevant auditing body e.g. BSI in the UK, Bureau Veritas (BV) in
Saint-Gobain PAM UK Pipe Division. As such, third party accreditation is alwaysindependently accredited
France and MPA-NRW in Germany. All of these certification bodies are also
achieved with the relevant auditing body e.g. BSI in the UK, Bureau Veritas (BV) in
independently accredited, for example BSI is accredited by UKAS.
France and MPA-NRW in Germany. All of these certification bodies are also In addition, all materials i
independently accredited, for example BSI is accredited by UKAS. havePAM been approved by th
In addition, all materials in contact with potable water used by Saint-Gobain UK
have been approved by the Secretary of State for the Environment, Food and Affairs
Ruralin accordance with
In addition, all materials in contact with potable water used by Saint-Gobain PAM UK 2000 (Englan
Regulations
Affairs in accordance with Regulation 31 of the Water Supply (Water Quality)
have been approved by the Secretary of State for the Environment, Food and Rural with Regulati
Regulations 2000 (England) (2001 in Wales), and by the Scottish Ministersaccordance
in
Affairs in accordance with Regulation 31 31.4.a of the
of the Water
Water Supply
Supply (Water
(Water Quality)
Quality)
Regulations.
accordance with Regulation 27 of the Water Supply (Water Quality) (Scotland)
Regulations 2000 (England) (2001 in Wales), and by the Scottish Ministers in
Regulations.
accordance with Regulation 27 of the Water Supply (Water Quality) (Scotland)
Regulations.
10
10
10
Section
Section 2
Product Range
Product Range
11
11
11
Section 2: Product Range
De
L
L
L
L
H
H
H
L L
Flanged Spigot
Kameleo Collar
12
12
Key Dimensions - Flanged
Pipe/Riser Piece Bend Duckfoot Bend
L
L
L H
L
H
H
45
45
H H H
L L L
All Flanged Level Invert Tee All Flanged Tee Concentric Taper
L
L H
L
L L
L
L
H
H
L
DN80-300 DN350-2000
13
13
Section 2: Product Range
Diameter500
Range K975, 90, 110, 125 and5500
DN/OD 160. 713
Joint 600 Manual
K9push-fit 5500 930
BlutopK9non-restrained, PFA =5500
25 bar
Gasket 700 1185
Blutop restrained Vi (self-anchored), PFA = 16 bar
800 K9 5500 1444
Coating: (Zinalium Zn/Al 85/15 400g/m2 plus 100 m epoxy)**
900 & Lining Lining:K9
Pipes - Coating 6950 thermoplastic 300
Ultramarine blue DUCTAN 2235
m, nominal
1000 adhesion
K9 8MPa 6950 2641
Fittings - Coating &
1100 Epoxy K9 8190
powder (EN14901 compliant) 3605
Lining
Angular 1200
deflection K9
6 degrees 8190 4269
1400 K9 8170 5647
1500 K9 8160 6327
For further information on how to joint a Blutop pipe, please refer to Section 3: Joints of this
brochure 1600
(page 67) K9 8160 7053
* Blutop socket compatible with PVC & HPPE spigot but PVC or HPPE socket not compatible with Blutop spigot
1800 K9 8140
** For information on special coatings for Blutop please refer to Section 5: Pipe Coatings on page 94
8587
PIPES 2000 K9 8130 10190
PIPE - 6M LONG DOUBLE SPIGOT PIPE 1.16M LONG
Weight Product Weight Product
DN/OD
(Kg/m) Code (Kg) Code
Note: Length and weight may vary from the detail provided in these tables. DN60 and
75 5.10 KXL75H60 5.90 229336
DN125 are available on request. BS EN 545 is currently being revised to include C30 pipe
90 6.20 KXL90H60 7.10 225410
in the diameter range DN350-600. This will be published in 2010. C30 pipes will be
110 7.60 KXM11H60 8.70 225412
supplied from Saint-Gobain PAM UK in 2010.
125 8.60 KXM12H60 10.00 227062
160 12.50 KXM16H60 14.50 229337
14
14 Note.-
- Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables
Section 2: Product Range
Pipe Range
Product
Pipe: PAM UK supplies pipes for potable water (Natural and Classic) and sewerage
Saint-Gobain
applications (Integral Plus and Integral) in diameter range DN80-2000. All Saint-Gobain PAM UK
pipes are manufactured
Saint-Gobain in accordance
PAM UK supply with
pipes for the latest
potable waterversion of BS EN 545
and sewerage for potableinwater
applications
and BS EN 598 for sewerage.
diameter range DN60-2000. All Saint-Gobain PAM UK pipes are manufactured in
accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for
Table 1: Standard offer, water - System CL
sewerage.
* Preferred option
1100 K9 8190 3605
Notes.-
- Lengths and weights are provided for estimation purposes only and actual 1200 values may vary from those K9
provided in these tables 8190 4269
- DN1100 and DN1500 pipes available on request (limited range of fittings)
1400
- For further information on the Rapid joint, please refer to Section 3: Joints of this brochure, page 67 K9 8170 5647
Table 2: Standard offer, water - System XL 1500 K9 8160 6327
1600 K9 8160 7053
Natural Pipe Length Spigot OD Socket OD Weight
DN
Prod Code Class 1800 (mm) K9 mm (DE) 8140mm (DE) (Kg/m)
8587
80 189486 C40 2000 5500 K9 98 8130 167.0 1019015.0
100 189509 C40 5500 118 188.0 17.5
150 189515 C40 5500 170 242.0 26.0
200 197942 C40 5500 222 295.0 35.0
250 189518 Note:
C40 Length and weight5500may vary from the
274 detail provided 352.0
in these tables. DN60 and
45.5
300 189519 DN125
C40 are available on request.
5500 BS EN 545 is
326 currently being revised
409.2 to include C30
57.0pipe
350 NSB35G55EC inC30
the diameter range5500
DN350-600. This will
378be published in 2010.
464.2 C30 pipes will be
69.0
400 NSB40G55EC supplied
C30 from Saint-Gobain
5500 PAM UK in 2010.429 516.2 79.5
450 NSB45G55EC C30 5500 480 574.2 94.0
500 NSB50G55EC C30 5500 532 629.2 111.0
600 NSB60G55EC C30 5500 635 738.5 150.5
700 SSB70N55EC C30 5500 738 863.0 188.0
Notes.-
- Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Saint-Gobain is expecting to manufacture 6m long pipes in the 2nd half of 2012. The above table will be updated accordingly in due course
14 15
Table
Table3:
2:Standard
Standardoffer
offer,sewer
sewer
Integral
DN Plus Integral Pipe Length
Length(mm)Spigot OD Socket
WeightOD(kg) Weight
DN
Prod code Prod code (mm) mm (DE mm (DE) (Kg/m)
80 80
205667 TSA80S60 5500
6000 98 85
167.0 13.0
100 205669
100 TSB10S60 6000
5500 118 188.0
102 16.0
150 205670
150 TSB15S60 6000
5500 170 242.0
153 23.5
200 205711 TSB20S60 6000 222 295.0 31.0
200 5500 204
250 205718 TSB25S60 6000 274 352.0 40.5
300 250
205712 TSB30S60 5500
6000 326 262
409.2 51.0
350 205719
300 TSB35S60 6000
5500 378 464.2
331 66.5
400 205720
350 TSB40S60 6000
5500 429 516.2
404 78.0
450 205731 TSB45S60 6000 480 574.2 92.5
400 5500 482
500 205732 TSB50S60 6000 532 629.2 106.5
600 450
205733 TSB60S60 5500
6000 635 565
738.5 138.0
700 205735
500 TSB70E69 6000/6950
5500 738 863.0
656 201.0
800 206666
600 TSB80E69 6950
5500 842 974.0
855 243.5
900 TSB90E69 6950 945 1082.0 291.5
700 5500 1104
1000 TSC10E69 6960 1048 1191.0 343.0
1200 800 TSC12N79 5500
8190 1255 1353
1412.5 507.5
1400 900 TSC14N80 8170
6950 1462 1592.1
2032 679.0
1600 1000 TSC16N80 8160
6950 1668 1815.9
2399 851.5
1800 TSC18N80 8150 1875 2032.2 1036.5
1100 8190 3579
2000 TSC20N80 8130 2082 2259.0 1242.0
1200 8180 4115
Notes.-
1400
- Lengths and weights 8170
are provided for estimation purposes only and actual values may vary from those5546provided in these tables
- DN1100 and DN1500 pipes available on request (limited range of fittings)
1500
- The differentiation 8160
between Integral Plus and Integral relates 6240 please refer to
to the coating of the pipe. For further information,
Section 5: Pipe Coating of this brochure, page 93
1600 8160 6946
1800 8140 8435
For information on the different types of linings and coatings (including TT) that Saint-
Gobain PAM UK 2000 8130
has available please refer to: 10099
- Section 4, Pipe Lining, page 85
- Section 5, Pipe Coating, page 93
Note: Length and weight may vary from the detail provided in these tables.
Also,
DN125for are
further information
available on the different types of joints available from Saint-Gobain PAM
upon request.
UK please refer to Section 3: Joints
of this brochure, page 67
16 15
Section 2: Product Range
Fabricated Pipe
Saint-Gobain
Saint-GobainPAM PAMUK UKoffers a range
offers of fabricated
a range pipepipe
of fabricated tailored to customer
tailored requirements:
to customer
flange spigot, flange
requirements. Flangesocket, double
spigot, flangeflanged,
socketdouble spigotflanged
and double and short length
pipes socket spigot
are available in a
pipe in diameters
variety of lengthsDN80 to DN2000
in diameter for both
range water and
DN80-1600 for sewer applications.
both water Fabricated
and sewer pipes are
application.
manufactured in accordance with BS EN 545 for potable water and BS EN 598 for sewerage.
Fabricated pipes are manufactured in accordance with BS EN 545 for potable water
The
andStandard
BS EN 598flange rating is PN16, but PN10, PN25 and PN40 are also available on request.
for sewerage.
Please contact the Technical Sales Department for further information, Tel: 0115 930 0700
The standard flange rating is PN16. PN10, PN25 and PN40 are also available, contact
Technical Sales Department, Tel: 0115 930 0650/0700.
Puddle Flanges
Puddlepipes
Fabricated Flanges
can be supplied with puddle flanges where required.
Note.- Where multiple puddle flanges are required it is recommended that a drawing is sent
Flanged, double spigot and spigot socket pipes can be supplied with puddle flanges
with the enquiry.
where required.
Table
Note:4: Standard
Where fabricated
multiple puddle pipe offer
flanges are required it is recommended that a drawing is
sent with the enquiry.
Clean Water (EN545) Sewerage (EN 598)
DN
Lining
Table 3: Standard fabricated pipe offer Coating Lining Coating
Notes.-
Please contact our technical team:
- For any requirements outside the above minimum and maximum dimensions
- For information on DN1800 and DN2000
18
16 17
Table 2: Standard offer, sewer
Double Flange Flange spigot Double spigot Socket spigot Flange socket
c/w puddle c/w puddle c/w puddle c/w puddle c/w puddle
DN
flange Pipe Length (mm)
flange flange Weight (kg) flange
flange
Min
DN 80 Max Min Max Min
5500 Max Min Max
85 Min Max
length length length length length length length length length length
80 100
300 170 5500
150 600 102 600
100 300 170 150 600 600
150 5500 153
150 300 173 150 600 600
200 200 5500
300 190 5500 5500150 5500 600 204 650
5500 5500
250 300
250 194 170
5500 600 262 700
300 500 225 450 600 750
350 300
500 420 5500
630 750 331 900
400 500
350 430 630
5500 750 404 900
450 500 450 630 750 950
400 5900 5900 5500 5900 6000
482 5900
500 550 500 680 750 950
600 450
550 550 5500
680 750 565 950
700 700 600 680 750 1000
500 5500 656
7000
800 750 650 680 900 1050
6400 6400 6400 6400
900 600
1100 1000 5500
750 900 855 1150
1000 1100
700 1000 750
5500 900 1104 1150
1200 1500 1200 1000 1000 8190 1300
1400 800 7400
1700 1600 7400 5500
1000 7400 1000 1353 1500 7400
1600 2000
900 1800 1500
6950 1500 2032 1700
Notes.-
1000
Please contact our technical team:
6950 2399
- For any requirements outside the above minimum and maximum dimensions
1100
- For information on DN1800 and DN2000 8190 3579
1200 8180 4115
1400 8170 5546
1500 8160 6240
1600 8160 6946
1800 8140 8435
2000 8130 10099
Note: Length and weight may vary from the detail provided in these tables.
DN125 are available upon request.
18 15
Section 2: Product Range
PAM Range
Product Direxional
APipe:
simple and effective ductile iron solution to situations where open cut trenches are not
suitable or possible.
Saint-Gobain PAM UK supply pipes for potable water and sewerage applications in
The PAM Direxional
diameter range is Saint-Gobain
range DN60-2000. PAM UKs
All Saint-Gobain PAMDirectional
UK pipesdrilling pipe which can
are manufactured in be used
for both water and sewer applications.
accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for
sewerage.
Range overview and technical details
DN100 to 700: ZMU coating
Table 1: Standard
Diameter Rangeoffer, water
DN800 to 1000: PUX based coating
Self-anchored pushfit, Universal TIS-K (Tyton) or Universal Ve
Joint
DN Pipe Class Pipe Length (mm) Weight (kg)
(Standard/Rapid) according to diameter
80 Class 40ZMU : 200mg Zinc 5500
plus 5mm cement 85
Coating
PUX: thick sprayed polyurethane based coating
100 Class 40 5500
Water (EN545) - Blast furnace cement 102
Lining
150 Class 40 Sewer (EN598) - Alumina
5500 cement 153
200 Class 40 5500 204
- Robustness of ZMU coating and PUX coating
250 Class 40 5500 262
ZM-U is a highly robust protective coating. In NO circumstances is further protection required.
This coating is suitable for drilling
300 pipelines
Class 40 through rocky
5500conditions without detrimental
331 effect
on the performance of the coating or pipe. SGG have devised a shock test for this coating to
350
prove its robustness. Class 40 5500 441
400 Class 40 5500 524
PUX is a polyurethane coating intended for use with high aggressive soils. Each pipe is tested
450
individually K9 detector test in order
after coating by a Holiday 5500 to check the protective
616 quality of
the coating.
500 K9 5500 713
- Joint 600 K9 5500 930
PAM Direxional is assembled using a simple anchored push fit jointing system. The double
chambered 700 K9 of a locking ring which
socket allows for the use 5500acts as both a restraint
1185 to enable
the pipe to800
be pulled through theK9 required drilling channel
5500and a thrust restraint
1444for the
pipeline. This joint is protected from abrasive conditions with the use of a rubber protective
collar and 900
a metal sheet cone. K9 6950 2235
1000 K9 6950 2641
For further information on how to joint a PAM Direxional pipe, please refer to Section 3:
1100
Joints of this brochure (page 67). K9 8190 3605
1200 K9 8190 4269
Installation calculations and technical support
Saint-Gobain
1400has developed a toolK9that will calculate the pulling forces required
8170 and will also
5647
make weight and lift calculations to ensure that the pipe is correctly balanced in the drilling
1500
channel. For K9this tool please contact
further information on 8160the technical department,
6327
Tel: 0115 930
16000700 K9 8160 7053
1800
Benefits of K9
Ductile Iron vs. Plastics 8140 8587
2000 Ductile Iron Plastics K9 Comments 8130 10190
SAFETY FACTORS HIGH (2.5) LOW (1.2) LOW SAFETY FACTORS IN PLASTICS MEAN
FAILURES ARE A VERY REAL RISK
UNPREDICTABLE NO/LITTLE WILL CAUSE DUCTILE IRON OFFERS ONE SOLUTION TO COVER
GROUND PROBLEM PROBLEMS WITH A WIDE VARIETY OF CONDTIONS EASY TO
CONDITIONS PERFORMANCE SPECIFY, HARD TO GET WRONG
OF PIPE
PULLING FORCES CAN VARIABLE MANY NEW MACHINES IN MARKET HAVE ABILITY
WITHSTAND ACROSS TO PULL AT WITH VERY HIGH FORCES, IN
HIGH FORCES DIFFERENT CERTAIN CASES THIS COULD BE MORE THAN
PRODUCTS MATERIAL CAN TAKE
MACHINERY NO ADDITIONAL EQUIPMENT REQUIRED FOR
PULLING DUCTILE IRON PIPES.
14 19
Section 2: Product Range
PAM Range
Product Direxional
Pipe:
Product Information
Saint-Gobain PAM UK supply pipes for potable water and sewerage applications in
Water Pipes diameter range DN60-2000. All Saint-Gobain PAM UK pipes are manufactured in
accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for
sewerage. Allowable
Product Allowable Length Operating Spigot O/D Socket* Weight Pipe
DN Joint
code deflection (mm) Pressure
Table 1: Standard offer, water (mm) O/D (mm) (Kg/m) Class
(PFA)
DN Pipe Class Pipe Length (mm) Weight (kg)
100 224302 UNV TIS-K 3 5970 64 128 220 22.50 C100
80 Class 40 5500 85
150 224305 UNV TIS-K 3 5970 60 180 260 32.50 C64
100 Class 40 5500 102
200 224307 UNV TIS-K 3 5970 52 232 320 45.00 C64
150 Class 40 5500 153
250 224308 UNV TIS-K 3 200 5970 46 40
Class 284 5500 380 59.00
204 C50
For pipes with a deflection of 3 the minimum radius achievable will be 115m and for pipes with a deflection of 2 the minimum radius achievable will be 172m.
Notes.-
- Lenghts and weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- For information on DN800-DN1000 range, please contact our Technical Department on 0115 930 0700
20
14
Section 2: Product Range
PAM Range
Product Direxional
Pipe:
Other Components
Saint-Gobain PAM UK supply pipes for potable water and sewerage applications in
diameter range DN60-2000. All Saint-Gobain PAM UK pipes are manufactured in
Pulling Heads Gaskets Locking ring Socket sleeve Metallic cone
accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for
sewerage.
WATER Product SEWER Product Product Product Product
DN Product code
Code Code code code code
Table 1: Standard offer, water
100 173371 JCB10BA JSB10BB 110259 110823 110326
500 215792 185414 400 JSB50BB Class 40 JKB50E 5500 110773 524 110320
450 K9 5500 616
600 215897 185415 JSB60BB JKB60E 110776 110327
500 K9 5500 713
700 215988 JSB70BA JSB70BB 110671 110026 110328
For pipes with600
a deflection of 3 the minimum K9 5500
radius achievable will be 115m and for pipes with a deflection 930
of 2 the minimum
radius achievable will be 172m.
700 K9 5500 1185
Jointing
800 K9 5500 1444
900 K9 6950 Products required
2235 for
Products required to make a joint:
dismantling a joint:
DN 1000 K9 6950 2641
Product Product Product
Description Qty 1100code Description
K9 Qty 8190code Description
3605 Qty
code
1200 K9 8190 4269
Disassembling
100 110355 Lever Fork Tool 1 NOT REQD 3 110281 1
set
1400 K9 8170 5647
Disassembling
150 110355 Lever Fork Tool 1 NOT REQD
1500 K9 3 110282
8160 1
set6327
1600 K9 8160 7053
Disassembling
200 110355 Lever Fork Tool 1 NOT REQD 3 110283 1
set
1800 K9 8140 8587
Assembly Assembly Disassembling
250 110279 1 2000111162 K9 1 110284
8130 10190 1
Lever Wedges set
Assembly Assembly Disassembling
300 110279 1 111163 1 110285 1
Lever Wedges set
Assembly Note: Length111163 Assembly
and weight may vary from the detail provided in theseDisassembling
tables. DN60 and 1
350 110279 1 1 111163
Lever Wedges set
DN125 are available on request. BS EN 545 is currently being revised to include C30 pipe
Assembly in1the diameter AssemblyThis will be published in 2010. C30 Assembly
range DN350-600. pipes will be
400 110279 111164 1 111164 1
Lever Wedges Wedges
supplied from Saint-Gobain PAM UK in 2010.
Assembly Assembly Assembly
450 110279 1 111165 1 111165 1
Lever Wedges Wedges
Assembly Assembly Assembly
500 110279 1 111165 1 111165 1
Lever Wedges Wedges
Assembly Assembly
600 1 111165 1 111165 1
Wedges Wedges
Assembly Assembly
700 1 111166 1 111166 1
Wedges Wedges
14 21
Fittings Range
Fittings: PAM UK supplies a comprehensive range of ductile iron fittings in diameter
Saint-Gobain
range DN80-2000. Please note that a selection of flanged fittings are supplied with adjustable
flanges. Further
Saint-Gobain information
PAM on adjustable
UK supplies flanges is
a comprehensive available
range on page
of ductile iron83fittings
of this guide.
in diameter
range DN60-2000. The standard range is detailed in pages 18-57. Please note that a
selectionfittings
Flanged of flanged fittings as
are supplied arestandard
suppliedwith
with adjustable
PN16 flanges. flanges. Further
For availability of information on
PN10, PN25 or
PN40 items flanges
adjustable please contact the Technical
is available on page Sales
89 ofDepartment,
74 this guide. Tel: 0115 930 0700
Flanged fittings
Saint-Gobain PAMareUKsupplied
supplies as
twostandard
ranges ofwith PN16 flanges. For availability of PN10,
fittings:
PN25 or PN40 items
- Blutop please
fittings, contact
which the Technical
are available Sales75,
on DN/OD Department,
90, 110, 125 and 160.
Tel: 0115 930 0650/0700.
- Traditional range of push-fit and flanged fittings, available on DN80-2000.
Gasket Identification
It is important that the appropriate gasket is used, EPDM for potable water application
and Nitrile for sewerage applications. Rapid joint gaskets are easily identifiable being
marked EPDM for use with potable water or marked NBR, indicating Nitrile, for sewer
applications. In addition, to help with identification and eliminating potential confusion
on site, Rapid joint gaskets are colour-coded.
Nitrile gaskets
Nitrile gasketsfor
forsewer
sewerapplications
applicationscan be identified
retain by adouble
the current doubleyellow
yellowring
ring throughout
throughout
the size
size range
rangeDN80-2000.
DN80-2000.
EPDM gaskets for water applications can be identified by a light blue double ring in the
size range DN80-600.
Blutop Gasket
The Blutop range of products utilizes a unique gasket available in non-anchored and
anchored versions:
22 17
Range (Fittings)
Table
The 2: Standard
small diameter offer, sewer compromise. Blutop is an innovative ductile iron pipe system
pipe without
dedicated to small diameter potable water distribution and is available in DN/OD 75, 90, 110,
125 and 160. DN Pipe Length (mm) Weight (kg)
FITTINGS 80 5500 85
90 BEND
100 45 BEND 5500 22 BEND 10211 BEND
Weight Product
150 Weight Product
5500 Weight Product Weight
153 Product
DN/OD
(Kg) Code (Kg) Code (Kg) Code (Kg) Code
75 4.40
200
KXL75CA 4.20 KXL75CB
5500 3.40 KXL75CD
204
3.50 KXL75CE
90 5.50 250
KXL90CA 5.10 5500
KXL90CB 4.40 KXL90CD 262
3.80 KXL90CE
110 7.10 KXM11CA
300 6.20 KXM11CB
5500 5.50 KXM11CD 5.80
331 KXM11CE
125 8.80 KXM12CA 7.00 KXM12CB 6.60 KXM12CD 6.70 KXM12CE
350 5500 404
160 12.30 KXM16CA 10.30 KXM16CB 9.20 KXM16CD 9.10 KXM16CE
400 5500 482
DN 80 FLANGED DUCKFOOT BEND 450 FLANGED SOCKET 5500 FLANGED565
SPIGOT
Weight Product Weight Product Weight Product
DN/OD 500 5500
(Kg) Code (Kg) Code (Kg)656 Code
75 600 5.00 KXL75BE1C
5500 3.85855 KXL75BU1C
90 8.00 KXL90DF0E 5.50 KXL90BE1E 4.70 KXL90BU1E
700 5500 1104
110 11.40 KXM11DF0E 6.70 KXM11BE1F 6.00 KXM11BU1F
800 8.20
5500
KXM12BE1G
1353
7.90 KXM12BU1G
125 13.60 KXM12DF0E
160 900 11.00 6950
KXM16BE1J 2032
12.10 KXM16BU1J
Note.-
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
24 23
15
Section 2: Product Range
Fabricated Pipe
Saint-Gobain PAM UK offers a range of fabricated pipe tailored to customer
FITTINGS requirements. Flange spigot, flange socket and double flanged pipes are available in a
variety of lengths in diameter range DN80-1600 for both water and sewer application.
SEMI SLIDING COLLARFabricated pipes are manufactured in accordance with BS EN 545 for potable water
collar PLUG
WITH BOSS FOR DRILLING
and BS EN 598 for sewerage.
Weight Product Weight Product Weight Product
DN/OD
(Kg) Code (Kg) Code (Kg) Code
The standard flange rating is PN16. PN10, PN25 and PN40 are also available, contact
75 5.30 KXL75MM
Technical Sales Department, Tel: 0115 930 0650/0700.
90 6.30 KXL90MM 4.00 KXL90MN 2.00 KXL90BH
110 7.30 Puddle Flanges
KXM11MM 4.90 KXM11MN 2.20 KXM11BH
125 8.80 KXM12MM 5.50 KXM12MN 2.95 KXM12BH
Flanged, double spigot and spigot socket pipes can be supplied with puddle flanges
160 10.70 KXM16MM
where required.
TAPER QUICK FLANGE (ANCHORED)
Weight Note: Where multiple puddle flanges are required
Product Weightit is recommended
Product that a drawing is
DN/OD DN/OD
(Kg) sentCode
with the enquiry. (Kg) Code
110x90 5.00 KXM11VE0D 75x60/65 2.40 226300
125x90 5.20 Table 3: Standard 90x80
KXM12VE0D fabricated pipe offer 2.80 216901
125x110 5.50 KXM12VE0E 110x100 3.40 216902
Clean Water (EN 545) Sewerage (EN 598)
160x75 6.50 DN
KXM16VE0C 125x125 4.30 216906
Lining Coating Lining Coating
160x90 7.00 KXM16VE0D 160x150 5.70 226301
160x110 7.40 KXM16VE0E Zinc/Aluminium
System CL, High alumina Zinc and red
160X125 7.80 KXM16VE0G
DN80-800 and blue epoxy
cement lined cement epoxy external
external
VALVES
PUSH FIT VALVE FOR BLUTOP OR PLASTIC PIPES Zinc and
System CL, High alumina Zinc and red
DN900+
Anticlockwise Close Clockwise Close bitumen
cement lined cement epoxy external
with cap top no cap top external
DN/OD
Weight Product Weight Product
(Kg) Coderefer to PAMRF04
Please (Kg) Code for fabricated pipe minimum lengths.
datasheet
75 12.30 RDL75KDXH 12.10 RDL75KBXH
90 12.80 RDL90KDXH 12.60 RDL90KBXH
110 16.20 RDM11KDXH 16.00 RDM11KBXH
125 22.80 RDM12KDXH 22.60 RDM12KBXH
160 30.00 RDM16KDXH 29.80 RDM16KBXH
ACCESSORIES
DRILLING &
LUBRICANT REPAIR COATING
TAPPING
DN/OD SADDLE
Contents Product Product
Weight (Kg)
(Kg) Code Code Weight (Kg) Product Code
0.85 158128 1 213686 75 Please enquire Please enquire
90 12.60 223387
110 16.00 223389
125 22.60 223390
160 Please enquire Please enquire
Note.-
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
24
16
Table 2: Standard
Kameleo offer,
is a variable sewer
angle fitting designed for use with water supply pipelines. It consists of a
main component or body and a range of accessories (kits) that combine together to produce
DNof joints: double socket,
different types Pipedouble
Lengthflange,
(mm) socket/flange, mechanical,
Weight (kg) etc
80 5500 85
It has a continuous variable angle from 0 to 45 which allows to make any connection with a
single bend, 100 5500bends.
without the need of using several 102
150 5500 153
It has an allowable operating pressure (PFA) of 16 bar, a 250 m epoxy coating and hot dipped
galvanised steel
200 nuts and bolts. 5500 204
Compliance250 5500
with standards and regulations: 262
Type tests 300
carried out on Kameleo comply with
5500 EN 545 331
The epoxy coating complies with EN 14901
350 in contact with drinking
The components 5500
water are in accordance with 404
European regulations
on potable400water 5500 482
For maintenance 450 and repairs 5500 565
In its flanged socket and collar versions, Kameleo slides along the pipe completely (at 0) and
500 5500 656
can be used in insertion.
Its variable600
angle allows Kameleo to slip 5500
into small gaps, between two pipe
855 spigots, for easy
maintenance and durable repairs to small damaged pipe sections.
700versions of Kameleo can be5500
The different easily pre-assembled outside1104
the trench for ease of
installation.
800 5500 1353
900 6950 2032
1000 6950 2399
Variable Angle BenD 1100 8190 3579
1200 Product Code Push-Fit Gasket
8180 4115
DN/OD Product Code
1400 Rapid
8170 Rapid anchored
5546
80 SZA80CV00TT 1500 185405
8160 JSA80CA
6240
100 SZB10CV00TT 185406 JSB10CA
1600 8160 6946
150 SZB15CV00TT 185407 JSB15DA
1800 8140 8435
2000 8130 10099
Product Product
DN/OD DN/OD
Code Code
80 JZA80KL 80 JZA80KM
100 JZB10KL 100 JZB10KM
150 JZB15KL 150 JZB15KM
25
15
Section 2: Product Range
Hydrant Duckfoot
Flange on Double SSA80CG1ETT - 16 150 95 12.5
Socket Tee DN80 40 25 183 165 12.5
All socket tee DN80 SSA80TE0ETT TSA80TE0E 64 183 92 11.5
Flange45
on Angle
DoubleBranch
Socket Tee* DN80 40
SSA80UD1ETT 65
TSA80UD1E 300
16 183250 Please enquire 13.0
165
Flange
45 Angle & Socket Piece**
Branch 40
SSA80TU0ETT 25
SSA80TU0EFF 110
64 300 250 7.5 15.0
FlangeFlange
& Socket
& Piece*
Spigot Piece SSA80BE10TT
40 TSA80BE1
25 16
350 110 8.0 7.5
45 SFA80CB00TT - 64 56 10.5
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Kameleo length at 0
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
26
18
DN80 Flanged (PN16 Flanges)
11.25
11.25 40
BBA80CE10TT 25
BBA80CE10FF 110
16 113 8.5 9.0
Duckfoot
All Flange Tee DN80 BBA80CF10TT
40 BBA80CF10FF
25 16
330 165
165 11015.6 14.0
LooseBlank
PuddleFlange
Flange Standard 40
BBA80PF00TT 25
BBA80PF00FF 16 110 260 3.5 11.5
D/T 1"
D/T 2" 40 186649 186652
25 16 3.5 4.0
D/T
Flange joint sets are available to1.5" 186650 your customer
order, please contact 186654 16
service representative. 4.0
* Weights are to be used as a D/T
guide.
2" 186651 186653 16 4.0
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
27
19
Section 2: Product Range
FlangeCap
& Socket Piece* SSB10BE10TT
40 TSB10BE1
65 1682 110 Please enquire 9.0
45 SFB10CB00TT - 64 64 16.0
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Kameleo length at 0
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
28
20
DN100 Flanged (PN16 Flanges)
Duckfoot DN80
11.25 40
BBB10CE10TT 25
BBB10CE10FF 180
16 125
115 16.0 16.0
Duckfoot
All Flange Tee DN80
DN80 BBB10CF1ETT
40 BBB10CF1EFF
25 16
360 180
175 125 18.5 20.0
Bellmouth DN80 40
BBB10VT1ETT 25
BBB10VT1EFF 140
16 185
200 Please enquire 9.5
Bellmouth
Blank Flange Standard BBB10BP10TT
40 BBB10BP10FF
25 16 140 185 4.8 6.5
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
29
21
Section 2: Product Range
UNIVERSAL
Cap 40 65 82 Please enquire
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Kameleo length at 0
Notes.-
** Adjustable
- For information on gaskets flanges, for(Rapid,
and joint sets bolt Universal
lengthsandrefer toplease
flange) adjustable flange
refer to Section datasheet
3: Joints on page 67.ref: PAMRF03.
Please note that our fixed flange joint sets are CESWI 7th edition compliant
30
22 - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
DN150 Flanged (PN16 Flanges)
Duckfoot
90 Long radius bend DN80 40
BBB15CH10TT 25
BBB15CH10FF 220
16 160
450 30.5 30.0
Duckfoot DN80
DN150 BBB15CF1ETT BBB15CF1EFF 16
220 220
160 160 31.5 25.5
LooseLoose
PuddlePuddle
Flange Flange 40
BBB15PF00TT 25
BBB15PF00FF 130
16 390
130 23.0 23.0
Blank Blank
FlangeFlange Standard
Standard 40
BBB15QN10TT 25
TBB15QN10FF 16 8.0 8.0
D/TD/T
1" 1" 186674
40 186678
25 16 8.0 8.0
D/TD/T
2" 2" 186675
40 186679
25 16 8.0 8.0
Reducing
Flangeflange** DN80
joint sets are available BBB15RM1ETT
to order, please - service representative.
contact your customer 16 11.0
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
31
23
Section 2: Product Range
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
32
24
DN200 Flanged (PN16 Flanges)
D/TDN100
1" BBB20RM2FTT
40 -
25 16 11.3 15.0
Flange
**Delivered jointwashers
with studs, sets are available
and nutsto order, please contact your customer service representative.
* Weights are to be used as a guide.
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
33
25
Section 2: Product Range
Bend 45 90 SSB25CA00TT
54 TSB25CA
65 50
136 252 32.5 50.5
45 SSB25CB00TT TSB25CB 50 136 41.5
22.5 54 65 69 27.0
22.5 SSB25CD00TT TSB25CD 50 70 33.0
11.25 11.25 54
SSB25CE00TT 65
TSB25CE 54
50 55 24.5 31.5
Duckfoot
Duckfoot SSB25CF00TT
54 SSB25TE0EFF
65 50
350 252
262 225 68.5 68.0
All socket tee DN80 SSB25TE0ETT SSB25TE0EFF 50 234 183 42.0
All Socket Tee DN80 32 37 234 183 35.5
DN100 SSB25TE0FTT TSB25TE0F 50 234 183 41.5
DN100 DN150 32
SSB25TE0JTT 37
TSB25TE0J 234
50 183
251 165 36.0 46.0
Notes.-
** Adjustable
- For information on gaskets flanges, for(Rapid,
and joint sets bolt Universal
lengthsandrefer toplease
flange) adjustable flange
refer to Section datasheet
3: Joints on page 67.ref: PAMRF03.
Please note that our fixed flange joint sets are CESWI 7th edition compliant
34
26 - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
DN250 Flanged (PN16 Flanges)
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
35
27
Section 2: Product Range
4545 BBB30CB20TT
16 BBB30CB20FF
25 16
400 400 76.0 74.0
22.5 BBB30CD20TT BBB30CD20FF 16 210 73.0
22.5 16 25 210 56.0
11.25 BBB30CE20TT BBB30CE20FF 16 175 62.0
90 Long radius bend 11.25 16
BBB30CH20TT 25
BBB30CH20FF 175
16 600 49.0 89.5
Duckfoot
Duckfoot BBB30CF20TT
16 BBB30CF20FF
25 16
400 400
257 255
Please enquire 108.0
All Flange Tee DN80 BBB30TE2ETT BBB30TE2EFF 16 800 290 94.5
All Flange Tee DN80 16 25 800 290 59.5
DN100 BBB30TE2FTT BBB30TE2FFF 16 800 300 93.0
DN100
DN150
16
BBB30TE2JTT
25
BBB30TE2JFF
800
16
305
800 325
62.0 100.0
DN150
DN200 16
BBB30TE2KTT 25
BBB30TE2KFF 800
16 325
800 350 68.7 93.0
DN250 BBB30TE2LTT BBB30TE2LFF 16 800 380 108.0
DN200 16 25 800 350 101
DN300 BBB30TE2MTT BBB30TE2MFF 16 800 400 109.5
DN250 16 25 800 380 85.0
All Flange Radial BBB30TW2MTT BBB30TW2MFF 16 1000 600 146.0
Level invert tee DN300
DN80 16
BBB30TT2ETT 25
BBB30TT2EFF 800
16 400
800 305 85.0 92.0
D/TDN100
2" BBB30RM2FTT
16 -
25 16 23.5 30.0
DN150
Flange joint sets are available BBB30RM2JTT
to order, please - service representative.
contact your customer 16 36.0
* Weights are to be used as DN200
a guide. BBB30RM2KTT - 16 25.0
DN150**DN300 SSB35UD2MTT
16 TSB35UD2M
25 16
314 485
340 370 74.0 119.5
DN350 SSB35UD2YTT TSB35UD2Y 16 485 380 132.0
DN350** 16 25 485 380 117
Flange on Socket Level invert tee* DN150 SSB35UT1JTT SSB35UT1JFF 16 339 340 60.5
Flange on Socket
Concentric Taper DN200 SSB35VE0KTT TSB35VE0K 50 335 54.5
Level Invert
DN150 DN250 16
SSB35VE0LTT 25
TSB35VE0L 334
50 340
260 85.5 52.0
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
38
30
DN350 Flanged (PN16 Flanges)
Duckfoot
90 Long Radius Bend 16
BBB35CH20TT 25
BBB35CH20FF 450
16 290
650 196 121.0
Duckfoot
All Flange Tee DN80 BBB35CF20TT
16 BBB35CF20FF
25 16
850 450
325 294 152 165.0
All Flange Tee DN80
DN100 BBB35TE2ETT
16 BBB35TE2EFF
25 16
850 850
325 325 154 120.0
DN100 BBB35TE2FTT BBB35TE2FFF 16 850 325 122.0
DN150 16 25 850 325 155
DN150 BBB35TE2JTT BBB35TE2JFF 16 850 325 123.0
DN200 16 25 850 325 159
DN200 BBB35TE2KTT BBB35TE2KFF 16 850 325 141.5
DN250 16 25 850 325 161
DN250 BBB35TE2LTT BBB35TE2LFF 16 850 325 132.0
DN300
DN300 16
BBB35TE2MTT 25
BBB35TE2MFF 850
16 425
850 425 177 144.0
DN350
DN350 BBB35TE2YTT
16 BBB35TE2YFF
25 16
850 850
425 425 194 153.0
All Flange Radial BBB35TW2YTT BBB35TW2YFF 16 1100 650 204.0
All Flange Radial 16 25 1100 650 304
Level invert tee DN150 BBB35TT2JTT BBB35TT2JFF 16 850 340 128.0
All Flange Level DN100 16 25 850 340 170
Concentric Taper DN150 BBB35VE2JTT BBB35VE2JFF 16 600 47.0
Invert
DN150 16 25 850 340 176
DN200 BBB35VE2KTT BBB35VE2KFF 16 600 60.5
Tapers Concentric DN200 16 25 600 71.0
DN250 BBB35VE2LTT BBB35VE2LFF 16 300 58.0
DN250
DN300 16
BBB35VE2MTT 25
BBB35VE2MFF 300
16 300 77.0 52.5
Flat DN200
DN250 16
BBB35VT2LTT 25
BBB35VT2LFF 600
16 600 71.0 67.0
DN300
DN250 BBB35VT2MTT
16 BBB35VT2MFF
25 16
600 300 77.0 52.0
LooseBellmouth
Puddle Flange BBB35PF00TT
16 BBB35PF00FF
25 16
225 150
495 660 51.0 50.0
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
39
31
Section 2: Product Range
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
40
32
DN400 Flanged (PN16 Flanges)
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
41
33
Section 2: Product Range
DN150**DN100 SSB45UV1FTT
16 SSB45UV1FFF
25 16
315 315
400 395 108 89.0
DN150 SSB45UD1JTT SSB45UD1JFF 16 315 400 102.0
DN300** 16 25 600 430 147
DN200 SSB45UD2KTT SSB45UD2KFF 16 315 410 115.0
DN450**DN250 16
SSB45UD2LTT 25
SSB45UD2LFF 600
16 460
600 420 196 129.5
DN300 SSB45UD2MTT TSB45UD2M 16 600 430 155.5
Flange on Socket DN100 16 25 229 380 90.0
Level Invert DN400 SSB45UD2NTT SSB45UD2NFF 16 600 450 188.5
DN150 345 380 Please enquire
DN450 SSB45UD2PTT SSB45UD2PFF 16 600 460 178.5
FlangeTapers Concentric
on Socket DN300 DN100
Level invert tee* 40
SSB45UT1FTT 53
SSB45UT1FFF 335
16 229 380 75.0 90.0
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Notes.-
- For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
42
34
DN450 Flanged (PN16 Flanges)
* ProductBlank Flange
offered with 16
PN16 adjustable flanges. For information on joint sets please refer to page 83.25 60.0
Notes.-
Flange joint sets are available to order, please contact your customer service representative.
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
* Weights
- Weights are
are provided to be used
for estimation as aonly
purposes guide.
and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
43
35
Section 2: Product Range
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
*- Product
Weightsoffered with adjustable
are provided flange.
for estimation For information
purposes only andon boltvalues
actual lengths,
mayplease
vary refer
fromto datasheet
those PAMRF03
provided in these tables
- Codes starting with T are gasket inclusive
Notes.-
For information on Joint Sets please see page xx. All our Joint sets are CESWI 7th edition compliant
Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
44
36
DN500 Flanged (PN16 Flanges)
Notes.-
DN400 SFB50UD2NTT - 16 565 480 231.5
- For information on fixed flange joint sets please seeDN500
page 81. PleaseSFB50UD2QTT
note that our fixed flange joint sets
- are CESWI 7th edition
16compliant 680 500 267.5
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
Taper DN400 SFB50VE0NTT - 260 125.0
Flange Socket SFB50BE20TT - 16 170 88.0
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
45
37
Section 2: Product Range
DN400 DN150
DN100 SSB60UD1JTT
SSB50UV1FTT TSB60UD1J
TSB50UD1F 16
570 340
230
380 490 enquire 121.5
325
Please 172.0
DN200
DN150 SSB60UV2KTT
SSB50UD1JTT TSB60UD2K
TSB50UD1J 16 340
325 500
430 196.5
143.0
DN600 25 30 800 400 322
DN300
DN200 SSB60UD2MTT
SSB50UD2KTT TSB60UD2M
TSB50UD2K 16 452
325 520
440 235.0
150.5
Flange on Double DN80** DN250
DN400 16
SSB60UD2NTT
SSB50UD2LTT 25
TSB60UD2N
TSB50UD2L 340
16 455
570
443 540168
450 279.0
173.0
Socket Tee DN600 SSB60UD2RTT TSB60UD2R 16 800 580 402.5
DN100** DN300 SSB50UD2MTT
16 TSB50UD2M
25 16
340 443
475 460169 180.5
Flange on Socket Level invert tee* DN150
DN400 SSB60UT1JTT
SSB50UD2NTT SSB60UT1JFF
TSB50UD2N 16
16 354
555 450
480 176.0
221.0
DN150** 16 25 340 475 172
Concentric Taper DN400
DN500 SSB60VE0NTT
SSB50UD2QTT TSB60VE0N
TSB50UD2Q 40
16 460
675 500 155.0
280.5
DN300** DN450 16
SSB60VE0PTT 25
TSB60VE0P 452
40 520
360 235 125.0
Flange on Socket Level invert tee* DN150 SSB50UT1JTT SSB50UT1JFF 16 348 400 133.0
Concentric Taper DN500
DN400** DN350 SSB60VE0QTT
16
SSB50VE0YTT TSB60VE0Q
25
TSB50VE0Y 40
570
40 258
540
378 325 120.0
88.5
Flange & Socket Piece* DN400 SSB60BE20TT
SSB50VE0NTT TSB60BE2
TSB50VE0N 16
40 170
290 149.0
86.5
DN600** 16 25 800 580 378
Flange & Spigot Piece DN450 BBB60BU20TT
SSB50VE0PTT BBB60BU20FF
TSB50VE0P 16
40 560
160 159.0
80.0
End Flange on Socket
Cap Socket 110085 - - 3.5
Flange & Socket Piece* SSB50BE20TT TSB50BE2 16 170 98.0
Level Invert
Flange & Spigot Piece DN150 Spigot 16 110086
BBB50BU20TT 25 -
BBB50BU20FF 354-
16 450
520 171 3.5
109.0
UNIVERSAL
End Cap Socket 110107 - - 3.0
Tapers Concentric DN400 36 48 460 127
Bend 90
Spigot SFB60CA00TT
110108 -- 40
- 645 350.5
3.0
DN450 45 36
SFB60CB00TT 48 - 360
40 285 121 262.0
UNIVERSAL
Bends DN500 22.5
90 SFB60CD00TT
SFB50CA00TT
36 48 -- 40
258 150
550 118 217.0
235.0
11.25
45 SFB60CE00TT
SFB50CB00TT -- 40 85
240 194.0
176.0
Flange & Socket Piece** 16 25 190 140
Flange on Double Socket Tee* DN80
22.5 SFB60UD1ETT
SFB50CD00TT -- 16 340
130 475 229.5
148.0
Flange & Spigot Piece DN100
11.25 16
SFB60UD1FTT
SFB50CE00TT 25 -- 560
16 340
75 480159 229.0
133.0
Flange on Double
Flange Socket
joint sets areTee* DN150 SFB60UD1JTT
contact your customer --service representative.
DN80 pleaseSFB50UD1ETT
available to order, 16
16 340
215 490
415 232.0
146.5
DN200
* Weights are to be used as a guide.
DN100 SFB60UD2KTT
SFB50UD1FTT -- 16
16 340
215 500
420 236.5
147.5
DN250
DN150 SFB60UD2LTT
SFB50UD1JTT -- 16
16 570
330 510
430 246.0
166.0
DN300
DN200 SFB60UD2MTT
SFB50UD2KTT -- 16
16 570
330 520
440 288.0
169.5
DN400
DN250 SFB60UD2NTT
SFB50UD2LTT -- 16
16 570
450 540
450 307.0
190.0
DN600
DN300 SFB60UD2RTT
SFB50UD2MTT -- 16
16 800
450 580
470 404.5
197.5
Flange & Socket Piece* DN400 SFB60BE20TT
SFB50UD2NTT -- 16
16 180
565 480 125.0
231.5
DN500 on jointSFB50UD2QTT
* Product offered with PN16 adjustable flange. For information sets please refer to page 83 - 16 680 500 267.5
Taper
Notes.- DN400 SFB50VE0NTT - 260 125.0
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Flange Socket
Weights are provided for estimation purposes only and actual valuesSFB50BE20TT
may vary from those provided in-these tables 16 170 88.0
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
46
38
DN600 Flanged (PN16 Flanges)
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
47
39
Section 2: Product Range
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
48
40
DN700 Flanged (PN16 Flanges)
DN600
Flange joint sets are available BBB70VT2RTT
to order, please BBB70VT2RFF
contact your customer 16
service representative. 600 340.0
* Weights are to be used as a guide.
Bellmouth BBB70BP20TT BBB70BP20FF 16 500 945 259.0
Blank Flange BBB70QN20TT BBB70QN20FF 16 166.0
* Product offered with PN16 adjustable flanges. For information on joint sets please refer to page 83.
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
49
41
Section 2: Product Range
UNIVERSAL
Flange & Socket Piece** 16 25 200 253
Bend 45 SFB80CB00TT - 30 364 700.0
Flange & Spigot Piece 16 25 600 254
22.5 SFB80CD00TT - 30 170 550.0
Flange joint sets are available to order,
11.25 pleaseSFB80CE00TT
contact your customer- service representative.
30 90 470.0
* Weights are to be used
Flange on double socket tee* as a guide.
DN200 SFB80UD2KTT - 16 355 585 530.0
DN600 SFB80UD2RTT - 16 1015 645 845.0
Flange & Socket Piece SFB80BE20TT - 16 200 385.0
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
50
42
DN800 Flanged (PN16 Flanges)
* Product offered with PN16 adjustable flanges. For information on joint sets please refer to page 83
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
51
43
Section 2: Product Range
Flange joint sets are available to order, please contact your customer service representative.
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
* Weights are to be used as a guide.
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
52
44
DN900 Flanged (PN16 Flanges)
Notes.-
- For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
53
45
Section 2: Product Range
Concentric
TapersTaper
Concentric DN800 DN800 SSC10VE0TTT
30 SSC10VE0TFF
41 30
480 480 468 417.0
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
- Codes starting with T are gasket inclusive
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
54
46
DN1000 Flanged (PN16 Flanges)
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
55
47
Section 2: Product Range
DN600**DN800 SSC12TD2TTT
29 SSC12TD2TFF
25 16
823 1245
885 9151190 1353.0
DN900 SSC12TD2UTT SSC12TD2UFF 16 1245 930 1397.0
DN900 29 25 1245 930 1573
DN1000 SSC12TD2VTT SSC12TD2VFF 16 1245 920 1380.0
DN1200DN1200 29
SSC12TD2BTT 25
SSC12TD2BFF 1480
16 950
1480 9501958 1732.0
Flange on Socket Level invert tee* DN200 SSC12UT2KTT SSC12UT2KFF 16 855 700 1084.0
Flange on Socket
Concentric
LevelTaper
Invert DN1000 SSC12VE0VTT SSC12VE0VFF 30 480 543.0
DN200 29 25 840
Flange & Socket Piece SSC12BE20TT SSC12BE20FF 16 240 484.0
Tapers Concentric DN1000 29 39 480 708
Flange & Spigot Piece SEC12BU20TT SEC12BU20FF 16 600 526.0
Flange & Socket Piece**
UNIVERSAL
29 25 240 635
* Product offered with PN16 adjustable flange. For information on joint sets please refer to page 83
Notes.-
- For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
56
48
DN1200 Flanged (PN16 Flanges)
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
57
49
Section 2: Product Range
Flange joint sets are available to order, please contact your customer service representative.
* Weights are to be used as a guide.
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
58
50
DN1400 Flanged (PN16 Flanges)
Flange joint sets are available to order, please contact your customer service representative.
* Weights are to be used as a guide.
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
59
51
Section 2: Product Range
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
60
52
DN1600 Flanged (PN16 Flanges)
* Product offered with PN16 adjustable flanges. For information on joint sets please refer to page 83
DN1600 16 25 2730 1240 3578
Notes.-
TapersonConcentric
- For information DN1200
fixed flange joint sets 16 that our fixed flange joint25
please see page 81. Please note 1085
sets are CESWI 7th edition compliant 1615
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
DN1400 16 25 890 1338
Flange joint sets are available to order, please contact your customer service representative.
* Weights are to be used as a guide.
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
61
53
Section 2: Product Range
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
62
54
DN1800 Flanged (PN16 Flanges)
DN1400 16 25 1250
DN1500 16 25 1250
DN1600 16 25 970
Flange joint sets are available to order, please contact your customer service representative.
* Weights are to be used as a guide.
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
63
55
Section 2: Product Range
FlangeFlange &Piece
& Socket Socket Piece** 16
SSC20BE20TT 25
SSC20BE20FF 395
16 395 1789.0
FlangeFlange
& Spigot
&Piece
Spigot Piece SSC20BU20TT
16 SSC20BU20FF
25 16
885 885 1749.0
Flange
* Product joint
offered with sets
PN16 are available
adjustable to order, on
flange. For information please contact
joint sets your
please refer customer
to page 83 service representative.
Notes.-
* Weights are to be used as a guide.
- For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant
- Weights are provided for estimation purposes only and actual values may vary from those provided in these tables
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
64
56
DN2000 Flanged (PN16 Flanges)
DN1600 16 25 1350
DN1800 16 25 1030
Flange joint sets are available to order, please contact your customer service representative.
* Weights are to be used as a guide.
** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.
65
57
Section 2: Product Range
Buttefly valves
66
58
Section
Section 3
Joints
Joints
59
67
59
Section 3: Joints
Jointing Systems
Saint-Gobain PAM UKspipes
pipesand
andfittings
fittingsare
areavailable
availablewith
with aa range
range of jointing
jointng systems
systems
to suit a range of applications or installation needs. Cost effective alternatives to the
use of thrust blocks are available using either Rapid anchor gaskets, Rapid mechanical
or the Universal joint.
Table 6: Pressure capabilities overview
Table 4: Overview
Joint offer
Non-anchored Anchored Joint offer
Diameter Band
Blutop Universal Universal
Blutop Rapid Rapid Vi Unanchored Anchored Gaskets Rapid
Mechanical
Ve Anchored
PAMLOCK
Vi Rapid Vi Rapid Ve
OD Water Water Sewer Water UTI DN600
Water Sewer WaterRapid
Sewer RapidSewer
Water Anchor Water Rapid Mechanical
Sewer Water Sewer
75 25 - - 16 - - - - - - - - - -
DN700-1200 Rapid N/A Rapid Mechanical
90 25 - - 16 - - - - - - - - - -
110 25 - - 16 DN1400-2000
- - - Rapid - - N/A
- - PAMLOCK
- - -
125 25 - - 16 - - - - - - - - - -
160 25 - - 16Table 5:-Pressure-capabilities
- - - - - - - -
DN Water Water Sewer Water Water Sewer Water Sewer Water Sewer Water Sewer Water Sewer
Joint offer
80 - 40 40 - 22 16 60 60 - - - - - -
Diameter Band
100 - 40 40 - 16 16 Unanchored
56 56 Anchored
64 Gaskets**- Mechanical
64 - Anchored**
- -
150 - 40 40 - 16 16 48 48 60 60 - 50 - -
UTI DN150 64 - 62* 40 - 25 64 - 55
200 - 40 40 - 16 16 43 43 52 52 - 44 - -
250 - 40 38 - DN200-400
16 12 3950 - 40*39 46 23 -46
20 - 3944 - 30 - -
300 - 40 35 - 16 12 34 34 41 41 - 37 - -
DN450-600 40 - 36 27 - 18 30 - 27
350 - 30 32 - 16 12 25 25 38 38 27 27 - -
400 - 30 30 - DN700-800
16 12 20 34 - 3220 35 N/A
35 25 2525 - 16 - -
450 - 30 29 - 13 11 16 16 32 32 23 23 - -
DN900-1200 31 - 28 N/A 16
500 - *30
Class 40 28
Pipe - 11 9 16 16 30 30 22 22 - -
600 - 30 ** K9 26 - DN1400-2000
10 8 16 28 - 2616 30 N/A
30 20 2025 - 16 - -
Pipe
700 - 30/25 29 - - - - - 27 27 16 16 - -
800
- 30/25 28-26 - - - - - 25 - 16 16 - -
-1000
1200 - 25
Rapid
29
Joint
- - - - - 25 - 16 16 - -
1400
- 25 28-26 - The Rapid
- joint is- the standard
- joint- for both- potable -water and
- sewerage
- application
25-16* 25-16*
-2000
* Except DN2000. Please enquire for all sizes from DN80-2000. The introduction of internally and externally
harmonised sockets for all Saint-Gobain PAM UK pipes and fittings offers substantial
benefits to customers in the UK and world-wide. Harmonisation of sockets means that
Blutop Joint (non-anchored)
just one joint can be used for both potable water and sewer products, with easy
identification of gaskets to ensure correct installation. The Rapid joint is a proven
system and has been used successfully and extensively throughout Europe and the
The Blutop
rest Joint isfor
of the World a push-fit joint to be used with Saint-Gobain PAM UKs Blutop range of
50 years.
products. Suitable for drinking water networks for sizes DN/OD75-160. It has been designed
How it works:
to last more than 100 years.
The sealJoints
Blutop is achieved by the compression
are compatible of the
with PVC pipe main body
conforming of the
to EN 1452elastomeric gasket.
or with HDPE pipe
As
conforming to EN 12201, i.e PVC and HDPE spigots conforming to the mentioned that
the pressure in the main increases, the fish-tail design of the gasket ensures standards
the
can seal tightensinto
be inserted proportionally
Blutop pipe.to the pressure.
Please note that Blutop pipe spigots must not be fitted
into sockets designed for other joints (plastic, or other cast iron parts).
Benefits:
How does it work?
Quick to install and dismantle
Capable of angular deflection and longitudinal withdrawal with no loss of
The seal is achieved by the compression of the main body of the elastomeric gasket. As
performance
the pressure in the main increases, the concave design of the gasket ensures that the seal
Provides opportunity to reduce the number of fittings
tightens proportionally to the pressure.
Flexible joint to cope with ground movement
Easy identification of gaskets for water or sewerage
One joint whatever the application
68
60
Section 3: Joints
Jointing
Rapid Joint Systems
Specification
Saint-Gobain PAM UK pipes and fittings are available with a range of jointing systems
Tables 6 & 7 give additional information regarding the joint specification and
Benefits:
to suit a range of applications or installation needs. Cost effective alternatives to the
dimensions.
l Ease of laying
use of thrust blocks are available using either Rapid anchor gaskets, Rapid mechanical
l Quick push fit joint with low insertion forces
or the Universal joint.
Table
l6: Fittings designed
Water pipe: (EPDM with handles for easy of insertion
gasket)
l Angular deflection of up to 6 degrees
Table
l4: Overviewof angular deflection and longitudinal withdrawal with no loss of
Capable
Pressure Rating (bar)
performance
l Enables long bends without
Joint offer Pipe Length
DN Pipe Class the use ofAllowable
Allowable fittings Allowable
Diameter Band
l Additional safety against the hazards of earth and trench movements (mm)
Operating Anchored
Unanchored Test Pressure
GasketsDeflection
Mechanical Anchored
Pressure (PFA) (PEA) (Degree)
UTI DN600 Rapid Rapid Anchor Rapid Mechanical
60 Class 40 64 82 5 6000
TableDN700-1200 Rapid gasket
7: Blutop pipe, non-anchored N/A Rapid Mechanical
80 Class 40 64 82 5 5500
DN1400-2000 Rapid Allowable
N/A PAMLOCK
Allowable
100 DN/OD Class 40 Pipe Class 64 82Operating 5 5500
Deflection (Degree)
Pressure (PFA)
Table 125 Class 40
5: Pressure capabilities 64 82 5 6000
75 C25 25 6
150 Class 40 62 79 offer
Joint 5 5500
Diameter 90 Band C25 25 6
200 110 Class 40Unanchored
C2550 Anchored 65 Gaskets**
25 5
Mechanical 5500
Anchored**
6
250DN150
UTI 125 Class 40 64 - 62*
C2543 56- 25 25
40 5 5500
64 - 55 6
300 160
DN200-400 Class 40 50 - 40*
C2540 53- 20 25
23 5 5500
44 - 30 6
350
Note.- DN450-600 Class 40 40 - 36 40 2753- 18 4 30 - 27 5500
Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculate for the above pipes
by using the following formulas:
DN700-800
400 Class 40 34 - 32 40 N/A
53 4 25 - 16 5500
PMA = PFA x 1.2
PEA = PMA + 5 bar
DN900-1200
450 K9 31 - 28 40 N/A
53 4 16 5500
* Class 40 Pipe
DN1400-2000
500 K9 28 - 26 38 N/A
51 4 25 - 16
5500
** K9 Pipe
600 K9 36 48 4 5500
800 K9 32 43 4 5500
The Rapid
The Rapid joint is the standard
standardjoint for
forboth
bothpotable water and sewerage application
900 joint is theK9 joint31 potable
42 water and sewerage
4 application
7000
for all
for all sizes
sizesfrom
fromDN80-2000.
DN80-2000.The Theintroduction
introductionof of
internally andand
internally externally
externally
1000 sockets
harmonised
harmonised K9 all
sockets for
for 30 PAM
all Saint-Gobain
Saint-Gobain PAMUKs 41 and
pipes
UK pipes 4 offers
and fittings
fittings 7000
offers substantial
substantial
benefits to
benefits customers in the UK and world-wide. Harmonisation ofofsockets means that
1100to customers K9in the UK and29world-wide. Harmonisation
40 4 sockets means 8190 that
just one joint can be used for both potable water and sewer products, witheasy
just one joint can be used for both potable water and sewer products, with easy
1200
identification
identification of K9 to
of gaskets
gaskets toensure 28
ensurecorrect
correct 39 The
installation.
installation. TheRapid 4jointisisa aproven
Rapidjoint 8180
proven
system and
system and has
has been
been used
used successfully
successfullyand
andextensively
extensivelythroughout
throughoutEurope
Europeand andthe
the
1400 K9 28 38 3 8170
rest of the World for over 50
rest of the World for 50 years. years.
1500 K9 27 37 3 8160
How it works:K9
1600 27 37 3 8160
The seal is achieved
is achieved by the compression of the main body of the elastomeric
the compression of the main body of the elastomeric gasket.gasket.
1800 K9 26 36 2.5 8140
As the internal
pressurepressure increases,
in the main the fish-tail
increases, design
the fish-tail of theofgasket
design ensures
the gasket that the
ensures that
sealseal
the tightens
2000 proportionally
tightens to the
proportionally
K9 topressure.
the
26 pressure. 36 2 8130
Benefits:
Quick
Note:
tolength
Pipe install and weight
dismantle
may vary from the detail provided in these tables.
Capablenegative
Allowable
of angular deflection
internal and longitudinal
pressure DN60-2000 iswithdrawal with noexternal
-1 bar, allowable loss of pressure
performance
is +3 bar.
Provides opportunity to reduce the number of fittings
Flexible joint to cope with ground movement
Easy identification of gaskets for water or sewerage
One joint whatever the application
60 69
61
Rapid Joint Specification
Tables 8 & 9 give additional information regarding the joint specification and dimensions.
Tables 6&
Table 8: 7 give
Water additional
pipe information regarding the joint specification and
(EPDM gasket)
dimensions.
Allowable Allowable Rapid Gasket
DN Pipe Class Operating Deflection Water (EPDM)
Table 6: Water pipe: (EPDM gasket) Pressure (PFA) (Degree) Prod Code
80 C40 40 5 185405
Pressure Rating (bar)
100 C40 40 5 185406
Pipe Length
DN150 Pipe ClassC40 Allowable Allowable
40
Allowable
5 185407
Operating Test Pressure Deflection (mm)
200 C40Pressure (PFA) 40 (PEA) 5
(Degree) 185408
250700 Class 40
C25*/C30 43 25/30 56 54 5500
JSB70BA
300800 C25*/C30
Class 40 40 25/30 53 54 JSB80BA
5500
900 C25/C30* 25/30 4 JSB90BA
350 Class 40 40 53 4 5500
1000 C25/C30* 25/30 4 JSC10BA
400 Class 40 40 53 4 5500
1200 C25 25 4 JSC12BA
450 K9 40 53 4 5500
1400 C25 25 3 JSC14BA
500
1600
K9 C25
38 25
51 43 5500
JSC16BA
600
1800 K9 C25 36 25 48 4
2.5 5500
JSC18BA
700
2000 K9 C25 34 25 46 42 5500
JSC20BA
*Preferred option
Notes.-
800 K9 32 43 4 5500
- For information on product codes, weights and lengths for water pipe please refer to table 1 & 2 on page 15
900negative internalK9
- Allowable 31 is -0.9 bar, allowable
pressure DN80-DN2000 42external pressure is4+5 bar 7000
- Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by
using the following formulas:
PMA1000
= PFA x 1.2 K9 30 41 4 7000
PEA = PMA + 5 bar
1100 K9 29 40 4 8190
1200 K9 28 39 4 8180
1400 K9 28 38 3 8170
1500 K9 27 37 3 8160
1600 K9 27 37 3 8160
2000 K9 26 36 2 8130
Note: Pipe length and weight may vary from the detail provided in these tables.
Allowable negative internal pressure DN60-2000 is -1 bar, allowable external pressure
is +3 bar.
70 61
Section 3: Joints
Table
Table7:
9:Sewer
SewerPipe:
Pipe (Nitrile
(Nitrile gasket)
gasket)
Rapid Gasket
Allowable Operating Allowable Deflection
DN Pressure Rating (bar) Sewer (Nitrile) Prod
Pressure (PFA) (Degree)
Code
Pipe Length
DN Allowable Allowable Allowable
80 40 5 JSA80BB
(mm)
Operating Test Pressure Deflection
100 Pressure (PFA) 40 (PEA) 5
(Degree) JSB10BB
80 150 64 40 82 5 5 JSB15BB
5500
200 40 5 JSB20BB
100 64 82 5 5500
250 38 5 JSB25BB
125 64 82 5 6000
300 35 5 JSB30BB
150350 59 32 76 4 5 5500
JSB35BB
200400 45 30 59 4 5 JSB40BB
5500
450 29 4 JSB45BB
250 38 51 5 5500
500 28 4 JSB50BB
300 35 47 5 5500
600 26 4 JSB60BB
350700 32 29 43 4 4 5500
JSB70BB
400800 30 28 41 4 4 JSB80BB
5500
900 27 4 JSB90BB
450 29 40 4 5500
1000 26 4 JSC10BB
500 28 38 4 5500
1200 29 4 JSC12BB
6001400 26 28 36 3 4 5500
JSC14BB
7001600 29 27 40 3 4 JSC16BB
5500
1800 27 2.5 JSC18BB
800 28 38 4 5500
2000 26 2 JSC20BB
900 27 37 4 7000
Notes.-
- For information on product codes, weights and lengths for sewer pipe please refer to table 3 on page 16
1000 26 36 4
- Allowable negative internal pressure DN80-DN2000 is -0.9 bar, allowable external pressure is +5 bar
7000
- Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by
using the following formulas:
1100 29 40 4 8190
PMA = PFA x 1.2
PEA = PMA + 5 bar
1200 28 39 4 8180
1400 28 38 3 8170
1500 27 37 3 8160
1600 27 37 3 8160
2000 26 36 2 8130
Note: Pipe length and weight may vary from the detail provided in these tables.
Allowable negative internal pressure DN80-2000 is -1 bar, allowable external pressure
is +3 bar.
62 71
DN1400-2000 Rapid N/A PAMLOCK
Joint offer
Diameter Band
Anchored
Anchored
Solutions
Solutions Unanchored Anchored Gaskets** Mechanical Anchored**
Rapid Joint
Blutop
Rapid
Rapid ViTheJoint
Anchor
AnchorRapid joint is the standard joint for both potable water and sewerage application
for
Theall
The Rapid sizes
Blutop
Rapid
Anchor fromisuses
Joint
Anchor
joint DN80-2000.
a push-fit
joint the
usessame
the The
joint tointroduction
besocket
socket
same used
as thewith
as ofSaint-Gobain
push
theinternally
fit
push
version. and externally
PAM
fit version.
The UKs
The Blutop
gasket gasket range of
harmonised
products.
features
features
stainless sockets
Suitable
stainless
steel teeth for
steel all
for drinkingSaint-Gobain
moulded water PAM
into networks
teeth moulded the
into UK
thefor
rubber. pipes and fittings offers
sizes OD75-160. It has been
rubber. substantial
designed to
benefits to customers
last more than 100 years. in the UK and world-wide. Harmonisation of sockets means that
HowjustHowit one
works:
itjoint
works:
can be used for both potable water and sewer products, with easy
The Blutop Vi Joint
identification of gaskets is the to
anchored version installation.
ensure correct of the BlutopThe Joint andjoint
Rapid can be
is afitted in all pipes
proven
When When
the joint
the is
joint
underis
within under
pressure
the pressure
Blutopthe teeth
the
range. grip
teeth
The the
grip
gasket pipe
thespigot
pipe
features spigot
and prevent
system and has been used successfully and extensively throughout Europe and the into
and fittings stainless and prevent
steel separation
teeth separation
moulded
of the of
joint.
the
restthe
ofRapid
joint.
rubber.
the WorldRapid
Anchor Anchor
for gaskets gaskets
50 years.can onlycanbeonly
usedbeonce,
used although
once, although
the joint
thecan
jointbecan be
remade remade
using ausing
new agasket.
new gasket.
How itit works:
How works
Benefits:
Benefits:
LowThe
When
cost,
Lowseal
the
highisjoint
cost, achieved
is under
performance
high by the
performance compression
pressure
pipeline the teeth
pipeline
anchorage ofgrip
the the
anchorage main body
pipe of the
spigot andelastomeric gasket. of
prevent separation
QuickAs the
theQuick
pressure
joint,
and easymaking
and toeasyin the
this
install a self-restrained joint. The Blutop Vi gasket can only be usedthat
main
to install increases, the fish-tail design of the gasket ensures once,
the
Eliminates
sealthe
although tightens
Eliminatesthe joint
need
theforproportionally
can
need be
thrust blockstoblocks
forre-made
thrust the
using
at pressure.
a new
changes
at ingasket.
changesdirection
in direction
DN80-600
DN80-600
Benefits:
Proven
Proven
solution solution
over many over many
years years
Benefits:
Quick to unstable
install and dismantle
Ideal for
Ideal
unstable
for ground ground
or where
or where
space space
is limited
is limited
l Ease of laying
Capable of angular deflection and longitudinal withdrawal with no loss of
l Quick push fit joint with low insertion forces
performance
To determine
To determine
l the number
Fittings the number
of anchored
designed of anchored
with joints required
handles joints
for easyrequired
please
of please
contact
insertion contact
Technical
Technical
Sales Sales
l Provides
Angular
Department,
Department, opportunity
Tel: deflection
0115
Tel:930
0115 to
upreduce
of930 to
0650/0700 orthe
0650/0700 usenumber
6 degrees or
PipeSpec.of fittings
use PipeSpec.
For guidance
For guidance
on how ontohow
install
to install
Flexible
l Enablesjoint to
longcope withwithout
bends ground movement
the
ouruse of fittings
Rapid Rapid
Anchor Anchor
gaskets, gaskets,
please please
request request
our Installation
Installation
Guide.Guide.
This isThis
available
is available
to to
l identification
Easy
Additional safety againstforthewater
hazards
ofwww.saint-gobain-pam.co.uk
gaskets of earth and trench movements
or sewerage
download
download
from our from website,
our website, www.saint-gobain-pam.co.uk or call or
ourcall
Brochure
our Brochure
Hotline,
Hotline,
l Low cost, high performance pipeline anchorage
Tel: 0800 One
Tel: 028
0800joint
2134. whatever
028 2134. the application
60 l Eliminates the need for thrust blocks at changes in direction
Rapid Rapid
AnchorAnchor
Joint utilises
Joint utilises
EPDM EPDM
gaskets.
gaskets.
EPDM EPDM
may not
maybenot
suitable
be suitable
for all for
sewerage
all sewerage
applications,
applications,
pleaseplease
consultconsult
Technical
Technical
Sales Department
Sales Department
for information,
for information,
Tel: 0115
Tel:930
0115 930
0650/0700.
0650/0700.
Table 10: Blutop pipe, Vi gasket
72 63 63
such situations. These solutions eliminate the need for thrust blocks so pipelines can
be installed in areas where space is limited or in unstable ground conditions where
thrust blocks are not an option.
Benefits:
Benefits:
Boltless
Low cost,anchoring system pipeline anchorage
high performance
Up to 64
Quick andbar working
easy pressure
to install
Used on PAM
Eliminates
theDirectional pipe blocks at changes in direction
need for thrust
Up
to 3
DN80-600 angular deflection
Can
be solution
Proven used in trenchless
over manyapplications
years
Ideal for unstable ground or where space is limited
applications,
Rapid Anchorplease consultEPDM
Joint utilises Technical Sales EPDM
gaskets. Department
may not forbe
information,
suitable forTel:
all0115Pipe930 0700.
sewerage
Pipe Allowable
applications,
DN please consult Technical Sales Department
Allowable for information,
Allowable Tel: Length930
0115
Class Operating
Note: Rapid Vi Gaskets are not colour coded.Test Pressure Deflection
0650/0700. (mm)
Pressure
(PEA) (Degree)
(PFA)
Note: Rapid Anchor Joint Gaskets are not colour coded.
Rapid 80 Vi Joint K9 Specification 64 82 3 5960
Rapid Anchor Joint Specification
Tables 11 to 13 give additional information regarding the joint specification.
100 K9 64 82 3 5960
Tables 8, 9 & 10 give additional information regarding the joint specification.
Table150
11: Water pipe K9 55 CL or System
(Natural, System 71 XL) - Rapid Vi
3 joint, 5990
EPDM anchor gasket
Table 8: Rapid (EPDM Gasket) Water Pipe, C40
200 K9 44 58 3 5960
Allowable Allowable
250DN K9 Pipe Class39 52Pressure Rating
Operating 3 (bar)
Deflection 5960
DN Pipe Class Pressure (PFA) Allowable
Allowable (Degree) Allowable
300 K9 37 49 3 5960
80 C40 Operating
22 Test Pressure
5 Deflection
350 K9 32Pressure (PFA)
43 (PEA) 3 (Degree)
5970
100 C40 16 5
60
400 K9 C40 C40 30 25 35 3 5
150 16 41 5 5970
80 C40 23 32 5
450200 K9 C40 30 16 41 34 5970
100 C40 C40 23 16 32 4 5
500250 K9 30 41 2 5970 63
125
300 C40 C40 22 16 31 3 5
600 K9 27 37 2 5970
350
150 C40 C30 18 16 26 3 5
700 K9 25 35 2 6950
400
200 C40 C30 16 16 24 2 4
800 K9 25 35 1.5 6890
450 C30 13 2
250 C40 16 24 4
900 K9 25 35 1.5 6870
500 C30 11 2
300 C40 16 24 3
1000600 K9 C30 25 10 35 12 6880
350 C40 20 29 3
Note.- 1100 K9 25 35 1 8150
- For information on product codes, weights and lengths for both system CL or system XL, please refer to tables 1 & 2 on page 15
400
- Allowable test pressure (PEA)K9
C40
and allowable maximum
20 29 2be calculated by using
1200 25 operating pressure
35 (PMA) for the above1 pipes can easily8150
the following formulas:
PMA = PFA x 1.2
Table
PEA = 9:
PMARapid
+ 5 barAnchor (EPDM Gasket) Water Pipe, K9
Rapid
Table 12: Anchor Joint
Push-fit Anchor Specification
Gaskets (Rapid Vi) - EPDM
80 350 C40 23
JSB35CA 32 5
350 Allowable
C40 Allowable
20 29 3
DN Operating Deflection
400 C40
Pressure (PFA) 20
(Degree) 29 2
80 16 5
Table 9: Rapid Anchor (EPDM Gasket) Water Pipe, K9
100 16 5
DN
200 Pipe Class
16
Allowable4
Allowable Allowable
Operating Test Pressure Deflection
250 12 4
Pressure (PFA) (PEA) (Degree)
60300 K9 12 40 3 53 5
350 12 3
80 K9 32 43 5
400 12 2
100 K9 32 43 5
450 11 2
125 K9 28 39 5
500 9 2
150 K9 25 35 5
600 8 2
Notes.-
200 K9 20 29 4
- Rapid anchor gaskets are manufactured from EPDM rubber for further information on gaskets please refer to table 12
250 on product codes,K9
- For information 20refer to table 3 on page
weights and lengths please 2916 4
- Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated
by using the following formulas:
300
PMA = PFA x 1.2
K9 20 29 3
PEA = PMA + 5 bar
350 K9 25 35 3
Nitrile anchor gaskets are currently being developed by Saint-Gobain PAM UK and are
expected400to be available in
K92012. The above23table will be updated
32 accordingly in
2 due
course.
450 K9 22 31 2
500 K9 19 28 2
600 K9 18 26 2
74
64
ection
ction
3: Section
Advanced
Advanced Solutions
Solutions
Joints
Universal Joint
Universal Joint
3:
3: Joints
Advanced
Advanced Solutions
Universal Solutions
Joint
For very demanding applications such as trenchless installation or for restraint
Joints
Universal Joint
Universal
Universal
Joint
Joint
3: Joints
The Universal
The Universal
Universal
The Universal Rapid
Rapid Rapid
Rapid
Anchor Anchor
Vi joint isjoint
Anchor
joint joint is
is available
available in
available in
in DN80-600.
in DN80-600. Universal
DN80-600.
DN80-600. Universal
RapidViRapid
Rapid
Universal
Universal Anchor
operates
Rapid
Anchor up to a
Anchor
Universal
Universal Rapid
Rapid
Rapid Vi
Vi (Anchor)
Anchor
Anchor How
operates
pressure
operates
operates
pipe
weld
it
up to aup
spigot.
bead
up
of works:
60
on
to a
bar
the
pressure
depending
(water)
to a pressure
pressure of 25 bar
pipe
of 25on
depending
of 25
spigot.
bar (depending
diameter. There
on diameter.
bar (depending
(depending onis diameter).
no
onThere
on diameter). need
diameter).
There There
for a
is no need
There is
weld
is no for no need
bead
a weld
is no
need need
for on for
thea
abead
for aon the
weld
weld bead bead
on the onpipethe pipe
spigot. spigot.
Anchorage is provided by the use of a separate Universal anchoring gasket with
The Universal
The Universal
Universal
moulded-in Rapid Rapid
Rapid
Anchor
stainless Vi jointteeth
Anchor
joint
steel available
isjoint is grip
to in DN80-600.
available
inthe
DN80-600. Universal
in DN80-600.
pipe spigotUniversal Rapid
Universal
to avoid Rapid ViRapid
joint operates
Anchor up to a
Anchor
separation.
How
Howoperates
How
operates it
itupworks:
pressure toitof
aup works:
works:
60 bar
pressure (water)
to a pressure
of 25 bardepending
of 25 (depending on diameter.
bar (depending There
on diameter). is
on diameter). no need
There There for
is no need a weld
is nofor
needa for aon the
bead
pipe
weld bead
weld spigot.
on
beadtheon pipethespigot.
pipe spigot.
Anchorage
Benefits:
Anchorage
Anchorage is
is provided
is provided by theby
provided by the
use
theof use
use of
of aa separate
a separate separate Universal
Universal
Universal anchoring
anchoring gasketgasket
anchoring with with
gasket with
moulded-in
moulded-in
stainless stainless
Boltless anchoring
moulded-in stainless steel
steel teeth
steel teeth
solution
to
teethgripto
tothegrip
grip the
pipe pipe
pipe spigot
thespigot spigot
to avoidto avoid
to joint joint
joint separation.
avoidseparation.
separation.
HowHow it works:
Simple itpush-fit
works: joint with separate anchoring gasket
Benefits:
Anchorage
Benefits: Up to
Anchorage
Benefits: 25
is providedbar working
is provided
by theby pressure
use
theof use
a separate
of a separate
Universal
Universal
anchoring
anchoring
gasketgasket
with with
Boltless anchoring solution
moulded-in
moulded-in
Boltless stainless
Boltless
anchoring stainless
steel
anchoring
solution teeth
steel to
teeth
solution griptothegrip
pipe
thespigot
pipe spigot
to avoidto joint
avoidseparation.
joint separation.
Universal Rapid Anchor Joint Specification:
Simple push-fit joint with separate anchoring gasket
Simple
Simple
push-fit push-fit
joint with joint separate
Up to 25 bar working pressure
with separate
anchoringanchoring
gasketgasket
Benefits:
Benefits:
Up to
Up to
to 60
25 bar 25 bar
barworking
working (water)
working
pressure pressure
working
pressure pressure
Boltless
Boltless
anchoring
anchoring
solution
solution
Table 13 provides additional information regarding the joint performance.
Universal
Universal
Universal Rapid
Rapid
Rapid
Rapid Anchor
Simple
Simple
Vi
push-fit
Joint
Anchor
Anchor Joint
push-fit
joint with
Specification:
Joint
Joint
joint separateSpecification:
Specification:
Specification:
with separate
anchoring
anchoring
gasketgasket
Universal Rapid
Up to
25
Up
13:Vi
bar
to
Table 18
Tables
25 JointRapid
working
bar
&Universal
Specification:
working
pressure
19 provide
pressure
Anchor,
additonal Water andregarding
information Sewer Pipe,
theK9
joint performance.
Table 18: Universal Rapid Vi, water Table
TableTables
13
Table 1413
13&provides
provides 15additional
provide
provides additional
additional
additional information
information information
information
regardingregarding
regarding
regarding
the jointthe joint
thethe performance.
joint performance.
performance.
joint performance.
Universal
Universal Rapid
Rapid Anchor
Anchor Joint
Joint Specification:
Specification: Pressure Rating (bar)
Table 14: Universal Rapid Vi, water Allowableand Sewer Pipe, K9 Pipe
Pipe Code
Prod Table
Table Allowable
13:
Table 13:
13: Universal
UniversalUniversal
Rapid Rapid
Pipe Anchor,
Allowable
Rapid
Anchor, Water Water
Anchor, PipeSewer
Water
and Allowable
andSpigot
Sewer
Pipe, K9 Pipe, K9 Allowable Pipe Length
DN Operating OD Socket OD Universal
DN Code Pipe ClassTableOperating
13
Table
provides
13 provides Deflection
additional Class
additional
information Length
information
regarding Test
regarding Pressure
the(DE)
joint
theperformance.
joint Weight
Deflection
performance. Prod Code
Prod Allowable Allowable Pipe mm
Pressure Rating mm
(bar)(DE) Pipe (mm)Anchoring
Pipe Pressure (PFA) (Degree) Pressure
(mm)
Pressure Pressure
Rating
Spigot Rating
(bar) (bar)(Degree)
OD Socket OD (Kg/m) Universal
DN Code Pipe Class Operating Deflection Length
Allowable
(PEA) Weight Pipe Gasket
Pipe Allowable (PFA)
Allowable mm (DE) mm (DE) Pipe Pipe Anchoring
80 Pipe
NGA80N60 C100 Table Pressure
13:
Table
60 (PFA)
Universal Pipe(Degree)
13: Universal
Rapid Rapid
Anchor,
Pipe
3 Anchor, (mm)
Water Water
and
5970Sewer Allowable
and Sewer
Pipe,
98 K9Pipe, K9159Allowable(Kg/m)
16.0 ANA80CA6
DN DN DN
80 K9 25 Allowable
Operating 35 Allowable
Allowable Allowable
3 LengthLength
5960Gasket
Length
Class Operating
Class Class Operating Test
Test Pressure
Test118Pressure
Pressure Deflection
Deflection
Deflection 16.0
100
80 NGB10N60
NGA80N60 C100 56
60
100
3
K9 Pressure
Pressure
5970
25 Pressure
Pressure
Pressure Rating98 Rating
35(bar) (bar)188
159
3 (mm) (mm)
19.5 (mm)
5960
ANB10CA6
ANA80CA6
(PEA) (PEA)
(PEA) (Degree)(Degree)
(Degree)
(PFA) Pipe Pipe
150
100 NGB15N60
NGB10N60 C64
C100 48
56 Pipe Pipe 3 Allowable
(PFA)Allowable
(PFA)
5970 170
118 230
188 29.0
19.5 ANB15CA5
ANB10CA6
DN 150 K9 25 Allowable 35 Allowable
Allowable Allowable
3 5990
80 DN 80
80 K9
Class Class
K9
K9 Operating
25 25
Operating
25 35 35
35 3 3
3 Length
5960 Length
5960
5960
200
150 NGB20N60
NGB15N60 C64 43
48 3 5970Test Pressure
Test170
222 Deflection
Pressure Deflection 29.0
290
230 40.0
(mm) (mm)
ANB20CA4
ANB15CA5
200
100 K9 Pressure
K9 25
Pressure
25 35
35 3
3 5960
5960
100 100 K9 K9 25 25 35 (PEA)
(PEA) 35 (Degree) 3 (Degree)
3 5960 5960
250
200 NGB25N60
NGB20N60 C50
C64 39
43 3 5970
(PFA) (PFA) 274
222 350
290 52.5
40.0 ANB25CA4
ANB20CA4
250
150 K9
K9 25
25 35
35 3
3 5960
5990
150
80 39 150 K9
K9 K9 25
25 5970 25 35
35 274 35 3
3350 3 5990 5990
5960 5960
300
250 NGB30N60
NGB25N60 C50 34 80 K9
3 25 32635 408 3 67.5
52.5 ANB30CA4
ANB25CA4
300
200 K9
K9 25
25 35
35 3
3 5960
5960
200
10034 200 K9
K9 K9 25
25 5970 25 35
35 326 35 3
3408 3 5960 5960
5960 5960
350
300 NGB35N60
NGB30N60 C40
C50 25 100 K9
3 25 37835 463 3 83.5
67.5 JNB35CA
ANB30CA4
350
250 K9
K9 25
25 35
35 3
3 5970
5960
250
15025 250 K9
K9 K9 25
25 5970 25 35
35 378 35 3
3463 3 5960 5960
5990 5990JNB35CA
400
350 NGB40N60
NGB35N60 C40 20 150 K9
3 25 42935 510 3 98.0
83.5 JNB40CA
400
300 K9
K9 20
25 29
35 3
3 5970
5960
300
20020 300 K9
K9 K9 25
25 5970 25 35
35 429 35 3
3510 3 5960 5960
5960 5960JNB40CA
450
400 NGB45N60
NGB40N60 C40 16 200 K9
3 25 48035 570 3 117.5
98.0 JNB45CA
450
350 K9
K9 16
25 24
35 3
3 5970
5970
350 350
25016 250 K9
K9 K9
K9 25
25 5970 25
25 35
35 480 35
35 3
3570 3 5970 5970
5960 5960JNB45CA
500
450 NGB50N60
NGB45N60 C40 2
3 532 625 3 139.0
117.5 JNB50CA
500
400 K9
K9 16
20 24
29 2
3 5970
5970
400 400
30016 300 K9
K9 K9
K9 20
25 5970 20
25 29
35 532 29
35 3
3625 3 5970 5970
5960 5960JNB50CA
600
500 NGB60N60
NGB50N60 C40 2 635 740 3 188.0
139.0 JNB60CA
600
450 K9
K9 16
16 24
24 2
3 5970
5970
450 450
35016 350 K9
K9 K9
K9 16
25 5970 16
25 24
35 635 24
35 3
3740 3 3 5970 5970
5970 5970JNB60CA
68 600
Notes.- NGB60N60 C40 2 188.0
- Lengths and weights are provided for estimation purposes 500 only500
and actual values
500 K9 may K9
K9vary from16 16
those provided
16 in these
24 24
tables
24 2 2
2 5970
5970 5970
5970
- For information on Rapid gaskets water please refer to400
Notes.- page 70400 K9 K9 20 20 29 29 3 3 5970
- Lengths
- Allowableandtest pressure
weights are(PEA) and allowable
provided maximum
for estimation purposes 600
operating
600only450
pressure
and
600 actual(PMA)
values
K9 mayK9 K9
for the
K9
above
vary pipes
from can
those
16 16
easily
provided be calculated
16 in these 24
by
24 tables24
24 2 2
2 5970
5970 5970
5970
using
- For the following
information gaskets water please refer to450
formulas:
on Rapid page 70 K9 16 16 24 3 3 5970
68
8 76
68 PMA
- = PFA x test
Allowable 1.2 pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas:
PEAPMA= PMA + x5 1.2
= PFA bar 500 500 K9 K9 16 16 24 24 2 2 5970 5970
PEA = PMA + 5 bar
- Limited range of Universal fittings available for DN350600
and DN450. K9 ourK9
600Please contact 16 Department
Technical Sales 16 for24 24 Tel. 0115
further details, 2 930 0700
2 5970 5970
8 68 75
Universal Rapid Locked
Table 12: Universal
The Universal Rapid Rapid
LockedVi, sewer
joint is available in diameters from DN80-1200. The joint
Table 15: Universal Rapid Vi, Sewer
is capable of operating pressure of up to 64 bar (depending on diameter) and is the
joint used on PAM Directional pipes.
Prod Code
Prod Allowable Allowable Pipe
Pipe Length Spigot OD Socket OD Universal
DN Code Operating Deflection Weight
Pipe Pressure (PFA)
How it work:
(Degree)
(mm) mm (DE) mm (DE)
(Kg/m)
Anchoring
Gasket
Anchorage is provided by a locking ring which abuts a weld bead on the pipe spigot to
80 TGA80N60 60 prevent 3joint separation.
5970 98 159 15.5 ANA80CA6
Benefits:
150 TGB15N60 48 3 5970 170 230 28.0 ANB15CA5
Boltless anchoring system
200 TGB20N60 43 Up to364 bar working
5970 222 290 38.5 ANB20CA4
Advanced Solutions
pressure
250 TGB25N60 39 Used 3on PAM Directional
5970 pipe 274 350 51.5 ANB25CA4
Up to 3 angular deflection
300 TGB30N60 34 3 5970 326 408 64.5 ANB30CA4
Can be used in trenchless applications
350 TGB35N60 25 3 5970 378 463 83.5 JNB35CA
400 Universal
TGB40N60 20 Joint 3 5970 429 510 98.0 JNB40CA
450 TGB45N60 16
Universal
3
Rapid
5970
Locked
480
Joint Specification:
570 114.0 JNB45CA
For very demanding applications such as trenchless installation or for restraint
Table 14 provides additional information regarding joint performance.
500 TGB50N60 16 2
requirements under high 5970pressures Saint-Gobain
532 PAM625 UK recommends 135.5the Universal JNB50CA
600 TGB60N60 16 Joint. The Universal joint offers boltless restraint solutions featuring174.0
a double
Table 14:2 Universal Rapid
Notes: 5970Locked: Water 635and Sewer 740 JNB60CA
-chambered socket
Length and weight design.
are provided The Universal
for estimation joint
purposes only anduses the same
actual values may varysealing socket
from those and
provided gasket
in these tables.
Notes.-
- Lengths and weights are provided for estimation purposes as the Rapid
only and joint,
actual values with
may varya from
secondthosechamber providing
provided in these tables for anchorage using either an
- For information on Rapid gaskets sewer please refer to page 71 Pressure Rating (bar)
- Allowable test pressure (PEA) and allowable maximum anchored gasket
operating pressure (PMA)orforathe
weld
abovebead and
pipes can locking
easily ring.by using the following formulas:
be calculated
PMA = PFA x 1.2 Allowable Pipe
Pipe Allowable Allowable
PEA = PMA + 5 bar DN
Note: A selected range of Universal Rapid Fittingsdetails,
Operating are Tel.
available. Length
Please contact the
- Limited range of Universal fittings available for DN350 and DN450. Please contact our Class
Technical Sales Department for further
Test Pressure 0115Deflection
930 0700
Technical Sales Department for further Pressure details, Tel: 0115 930 0650/0700. (mm)
(PEA) (Degree)
(PFA)
100 K9 64 82 3 5960
The Universal Rapid Anchor joint is available in DN80-600. Universal Rapid Anchor
Rapid Ve
Universal Rapid Joint
(Locked)
Locked operates
150up to a pressure
K9 of 25 bar55 (depending on 71diameter). There3 is no need5990for a
weld bead on the pipe spigot.
200 K9 44 58 3 5960
The Universal
Universal Rapid
RapidVe joint joint
Locked is available in DN100
is available - 1200. The
in diameters joint
from is capable ofThe
DN80-1200. operating
joint
How250itof works:
pressure up to 64 K9 (depending39
bar on diameter) 52
and is the joint 3
used on PAM 5960
Direxional
is capable of operating pressure of up to 64 bar (depending on diameter) and is the
pipes.
Anchorage
joint used is provided by the use of a separate Universal anchoring gasket with
300 on PAM Directional
K9 pipes.37 49 3 5960
moulded-in stainless steel teeth to grip the pipe spigot to avoid joint separation.
How it works:
How350it work: K9 32 43 3 5970
Benefits:
400 is providedK9by a locking 30
Anchorage 41 a weld bead3on the pipe 5970
ring which abuts spigot to
Boltless anchoring solution
prevent
Simple
joint separation.
450 push-fit joint
K9 with separate
30 anchoring41gasket 3 5970
Up to 25 bar working pressure
500
Benefits: K9 30 41 2 5970
Boltless anchoring system
Universal Rapid Anchor Joint Specification:
600 K9
Up to 64 bar working pressure
27 37 2 5970
Table 900
13: Universal Rapid
K9 Anchor, Water
25 and Sewer
35 Pipe, K9 1.5 6870
Universal
1000 Rapid
K9 Locked Joint35Rating
25 Pressure Specification:
(bar) 1 6880
Pipe
Pipe Allowable
Table1100 K9
14 provides additional
DN 25
information Allowable
regarding Allowable
35 joint performance.
1 8150
Length
Class Operating
Test Pressure Deflection (mm)
1200 K9 Pressure
25 35 1 8150
Table 14: Universal Rapid Locked: Water (PEA) (Degree)
(PFA) and Sewer
80 K9 25 35 3 5960
76 Pressure Rating (bar) 69
100 K9 25 35 3 5960
Pipe
Pipe Allowable
Section 3: Joints
Universal Rapid Ve Joint Specification:
Table 16 & 17 provides additional information
Universal Rapid Locked regarding joint performance.
Prod
Rapid
The Anchor
Universal
Allowable Jointjoint
Rapid Locked Specification
is available in diameters from DN80-1200. The joint Prod code
is capable ofAllowable
Operating operating pressure of up toSpigot
Pipe Length 64 barOD
(depending
Socket on
Pipe
OD diameter) and is the
Universal
DN Code Pipe Class Tables &Deflection
8, 9 on 10 give additional information regardingmm
the(DE) Weight
joint specification.
Pressure
joint used PAM (mm)
Directional pipes. mm (DE) Locking
Pipe (Degree) (Kg/m)
(PFA) Ring
100 NFB10N60 C100 Table
64 8: it
How Rapid (EPDM
work:3 Gasket)5970
Water Pipe, C40
118 188 19.5 110259
DN
100 Pipe Class
K9 64 Allowable82 Allowable3 Allowable
5960
Allowable Operating Test Prod code Deflection
Pressure
Allowable Pipe
Prod Operating 150 K9 Spigot OD Socket OD71 Weight
55Pressure Universal
DN Deflection Length (PFA) (PEA) 3 5990
(Degree)
code Pressure mm (DE) mm (B) (Kg/m) Locking
(Degree) (mm)
(PFA) 60
200 K9 K9 44 40 58 53 3 Ring 5
5960
100 209956 64 3 5970 118 188 19.0 110259
80
250 K9 K9 39 32 52 43 3 5
5960
150 209958 60 3 5970 170 230 28.0 AKB15E
100
300 K9 K9 37 32 49 43 3 5
5960
200 209959 52 3 5970 222 290 38.5 AKB20E
125
350 K9 K9 32 28 43 39 3 5
5970
250 209960 46 3 5970 274 350 51.5 AKB25E
150 K9 25 35 3 5
300 209981 41 3400 5970K9 326 30 408 41 64.5 AKB30E 5970
64 77
69
Section 3: Joints
PAMLOCK Joints
The PAMLOCK joint is used on pipes and fittings, DN1400-2000 where self restrained
joints are required.
How it works:
provided by the addition
Anchorage is provided addition of
ofaaweld
welded bead
bead onto
onto thethe
pipepipe spigot,
spigot, andand
a a
segmented locking
locking ring
ring which
which abuts
abutsthe
theweld bead and a conformator which
welded bead and a conformator which
restricts the diameter of the socket mouth and is held in place by two locking clamps.
The conformator is filled with steel shot to complete the joint.
Benefits:
Boltless anchoring system
Up to 25 Bar working pressure
Table 18: PAMLOCK Table 15: PAMLOCK, Water and Sewer Application
78
70
DN
200 Allowable13Operating 21
Allowable Allowable4Deflection
Benefits: 600 8 15 2
Provision Pressuremaintaining
(PFA) Test Pressure (PEA) (Degree)
250for anchorage whilst12 flexibility
19 4
Note: Rapid anchor
Eliminates gaskets
need for areblocks
thrusts manufactured from EPDM rubber.
80
300 23
12 32 5
Ideal for unstable ground or where space is limited19 3
Suitable for higher pressure mains
Ve (Mechanical) Joint
100 23 32 5
Rapid Mechanical350
Weld bead can be applied
14
on site*
22 3
125
Requires
400a minimal number of 22
14fittings compared to31 5
22other ductile iron anchor
2
TableRapid
The Ve joint
10: Rapid utilises
Anchor
Mechanical the
(EPDM
joint same socket
Gasket)
utilises andsocket
gasket
the Sewerage
same Pipe as the
and Rapid
gasket aspush-fit version.
the push-fit version.
solutions
150
450 16
12 24
19 5
2
How it works: Pressure Ratings (bar)
200
500 to the Installation13
* Please refer 21
Guide for required equipment.
10 17 4
2
Anchorage DNis provided by the addition of the Rapid mechanical anchor kit which
comprises: 250
Allowable Operating
12
Allowable
19
Allowable Deflection
4 65
600 8 (PFA)
Pressure 15 (PEA)
Test Pressure 2
(Degree)
1. Factory-applied weld bead on the pipe spigot. Where pipes have been cut, the bead
Note: 300anchor gaskets are 12 19 rubber. 3
canRapid
also be welded on site, pleasemanufactured
refer to thefrom EPDM
Installation Guide.
80 23 32 5
2. A locking
350ring (single piece DN80-700,
14 segmented 22 DN800-1200) which abuts3 the
weld bead.
welded bead.
100 23 32 5
Rapid Mechanical 3. A bolted400gland which tightens 14against the pipe socket 22 using hook bolts and2 retains
125 ring.
the locking 22 31 5
450 12 19
The Rapid Mechanical joint utilises the same socket and gasket as the push-fit 2 version.
150 16 24 5
Benefits:
500 10 17 2
How
it200works:
Provision for anchorage whilst 13maintaining flexibility 21 4
Eliminates
600 need for thrusts blocks
8 15 2
Anchorage is provided by the addition of the Rapid mechanical anchor kit which
Ideal for250
unstable ground or 12
where space is limited 19 4
comprises:
Note: Rapidfor
Suitable anchor
highergaskets aremains
pressure manufactured from EPDM rubber.
1. Factory-applied
300 weld bead on12 the pipe spigot. Where 19 pipes have been cut,3 the bead
Weld bead can be applied on site*
can also be welded on site, please refer to the Installation Guide.
Section 3: Joints
Requires aring
minimal
350
2. A locking (singlenumber of
14fittings segmented
piece DN80-700, compared to22 other ductilewhich
DN800-1200) iron anchor
3 the
abuts
Rapid Mechanical solutions
welded bead.
3. A bolted400gland which tightens 14against the pipe socket 22 using hook bolts and2 retains
The Rapid
Note.- Mechanical joint utilises the same socket and gasket as the push-fit version.
the locking
450 ring. 12 19 2
*Please
Pleaserefer
refertoto the
the Installation
Installation Guide
Guide forfor required
required equipment.
equipment.
How it works: 65
Benefits: 500 10 17 2
Rapid Mechanical Joint Specification Rapid Ve Joint Specification
Anchorage
Provision is provided
for anchorage by the addition
whilst of
maintaining the Rapid mechanical
flexibility anchor kit which
comprises:
Eliminates 600 need for thrusts blocks 8 15 2
Tables 11 & 12 provide additional information Tables19 & 20
regarding
1. Factory-applied provide
theweld additional
joint information
specification
beadoronwherethe pipe and regarding
Where pipes have been cut, and
dimensions.
spigot. the joint specification dimensions.
the bead
Ideal
Note: for unstable
Rapid ground
anchor gaskets are manufacturedspace is limited
from EPDM rubber.
can also be
Suitable for welded on site, please
higher pressure mainsrefer to the Installation Guide.
Table 11: Rapid Mechanical,
19: Rapid Ve (Mechanical) Water Pipe,pipe
water K9
2. A locking
Weld beadring can(single pieceon
be applied DN80-700,
site* segmented DN800-1200) which abuts the
welded
Requires bead.
a minimal number of fittings compared to other ductile iron anchor
Rapid Mechanical
Pressure Rating (bar)
Allowable 3. A bolted
solutions
Allowable gland which
External
External
tightens
Diameter
Diameter (OD)
against
(OD)
the pipe socket
Pipe using hook
Bolts
bolts
Bolts
and retains
Prod Pipe Operating Nom. Max. Max. Pipe Weight
DN Pipe Allowable Allowable theDeflection
locking ring. Nom. Max.
Pipejoint utilises
Max.
Pipe theAnchor Length Length
DN code Class Pressure TheAllowable
Rapid Mechanical same socket
Length and (Kg/m)as the
gasket No.push-fit version.
DiaLength
(Degree) Pipe Barrel Pipe Socket Anchor (mm)
Class Operating Test
(PFA) Deflection
Gland
No. Dia
(mm)
Pressure Pressure *Benefits:
Please refer toBarrel
the OD Installation
Socket OD Guide forOD
Gland required(mm)equipment. (mm)
350 NQB35G60 (PFA)
C30 (PEA)
How (Degree)
27 Provision
it3 works: OD378
for anchorage whilst OD570 flexibility
OD465 maintaining 6000 68.0 8 M27 102 65
Anchorage
Eliminates is provided
need for by the addition
thrusts blocks of the Rapid mechanical anchor kit which
40080 NQB40G60 K9 C30
64 25
82 53 98429 168517 234618 6000
5500 79.5
4 10
M22 M27 70 102
comprises:
Ideal for unstable ground or where space is limited
450
100 NQB45G60 C30 23 1. 5 3 for higher 480 bead 575the pipe
K9 64 82 Factory-applied
Suitable 118 weld pressure189onmains 255671 spigot.5500 6000 pipes
Where 93.5 14
M22cut,M27
4 have been the 70
bead102
1200
350 SQC12H80 K9 C25
32 16 Eliminates
43 31.5 need for thrusts
3781255 blocks 570
4651412 1547 8190
5500 461.5
8 40
M27 M27 102 123
Ideal for unstable ground or where space is limited
400
Notes.- K9 30 41 Suitable 3 for higher 429 pressure 517 mains 618 5500 10 M27 102
- Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables.
- For anchoring solutions DN80-DN300 please refer to Universal
Weld joint or enquire.
450 test pressure
- Allowable K9 (PEA) and allowable
30 41 operating
maximum 3bead(PMA)
pressure
can480be applied on site* 671
for the above 575 5500
pipes can easily be calculated by 14 formulas:
using the following M27 102
PMA = PFA x 1.2 Requires a minimal number of fittings compared to other ductile iron anchor
PEA500= PMA + 5 bar K9 30 41 3 532 630 734 5500 16 M27 102
solutions
600 K9 27 37 3 635 739 840 5500 20 M27 102
250
100 TQB25S60 39 4 274 353 457 6000 40.0 6 M27 102
700
350 TQB70E69
19 16
28 32 738
378 863
465 958
570 69505500199.0 8 24 M27
M27 123 102
800
400 TQB80E69
18 16
26 32 842
429 974
517 1100
618 69505500243.5 1030 M27
M27 123 102
900 TQB90E69 16 1.5 945 1082 1218 6950 291.5 28 M27 123
450 18 26 3 480 575 671 5500 14 M27 102
1000 TQC10E69 16 1.5 1048 1191 1306 6955 343.0 30 M27 123
500 18 26 3 532 630 734 5500 16 M27 102
1200 TQC12N79 16 1.5 1255 1412 1547 8185 507.5 40 M27 123
600 16 24 3 635 739 840 5500 20 M27 102
Notes.-
700
- Lengths 20provided for estimation
and weights are 29 2 only and actual
purposes 738values may vary
863from those provided
958 in these 5500
tables. 24 M27 123
- For anchoring solutions DN80-DN100 please refer to Universal joint or enquire.
- Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas:
800
PMA = PFA x 1.2
13 21 2 842 974 1100 5500 30 M27 123
PEA = PMA + 5 bar
900 13 21 1.5 945 1082 1218 6950 28 M27 123
80 67
UTI
UTIDN300
DN300 PN10
PN10 PN16
PN16 PN25/40
PN25/40
DN350-600
DN350-600
DN350-600 PN10
PN10 PN16
PN16 PN25/40
PN25/40
DN700-1200
DN700-1200
DN700-1200 PN10
PN10 PN16
PN16 PN25/40
PN25/40
DN1400-2000
DN1400-2000
DN1400-2000 PN10
PN10 PN16
PN16 PN25/40
PN25/40
Flange Joint
Flanged joints are rigid an
Table
Flanged
Flanged 16: Pressure
joints
joints are
are capabilities
rigid
rigid and
and are
are typically
typically used
used in in above
above ground
ground applications.
applications. Due
risk Due
of toto the bending m
the
excessive
risk
risk ofof excessive
excessive bending
bending moments
moments being
being imposed
imposed it it
is is recommended
recommended that
that flangedis NOT buried. In
flanged
pipework
pipework
pipework is is
NOTNOT buried.
buried. InIn certain
certain situations
situations Pressure
it it
maymay bebe Capability
necessary
necessary toto bury
bury flange please contact T
flange
pipework,
Diameter Band
PCD
PCD
pipework,
pipework, please
please contact
contact Technical
TechnicalLow Sales
Sales Department
Department forfor
Medium advice,
advice, Tel:
Tel: 0115
0115 930930
0650/0700.
High
D
D
g
PCD
PCD
PCD
PCD
0650/0700.
0650/0700.
D
D
D
D
g
g
Benefits:
Benefits: Strength of DI supports
Strength
Strength ofof
DIDI
supports
supportsexternal
external
bending
bending moment
moment
b bb b making
a
makingit it
ideally
ideallysuited
suited forfor
ground above
above
applications
PN16a
DN700-1200
ground
ground applications
applications PN10 PN25/40
High beam strength acc
a a
a a
High
High
beam
beam
strength
strength
accommodates
accommodates
spans
spans
upup
toto
16m
16m
DN1400-2000 PN10 PN16 PN25/40
No risk of performance
NoNo
risk
risk
ofof
performance
performance
loss
loss
through
through
UVUV
degradation
degradation Wide range of flanges a
Wide
Widerange
range
ofof
flanges
flanges
available
available
in in
PN10-PN40.
PN10-PN40.
Flanged joints are rigid and are typically used in above ground applications. Fixed Flanged
Due to the Joi
Fixed
FixedFlanged
risk of FlangedJoint
excessive bending JointSets: Sets:
moments being imposed it is recommended that flanged
Joint sets are available to o
Joint
Joint
sets
setsare
are
available
availabletotoorder
orderforfor
use
use
with
withfixed
fixed
flanges,
flanges,these
these
sets
sets
contain
contain
allall
components required for f
pipework, please contact Technical Sales Department for advice, Tel: 0115 930
components
components required
required forfor
fixed
fixed
flanged
flangedjoints.
joints.
PCD
0650/0700.
D
D
Full face
Inside
InsideBolt gasket
Bolt
Circle
Circle80
(IBC)IRHD
(IBC)gaskethardness
gasket 8080
IRHD
IRHDhardness
hardness Mild steel (grade 4.6) bo
Benefits:
Mild
Mild
steel
steel
(grade
steel (grade
(grade4.6)
4.6)
bolts,
4.6) bolts,
nuts
bolts, nuts
and
nuts and
andwashers
washers
washerscoated
coated
rilsan toto
water
coatedwater
to industry
industry
water specification
specification
(WIS)
industry 4-52-03
specification
Strength
(WIS) of DI
WIS 4-52-03
4-52-03
(WIS) 4-52-03 supports external bending moment making it ideally suited for above
b b
ground applications
a a EPDM gaskets are supplied
EPDMHigh
EPDM beam
gaskets
gaskets strength
are
are accommodates
supplied
supplied
forfor
use
use
in in spans
potable
potable up
waterto
water 16m
applications
applications
and
and
Nitrile
Nitrile
gaskets
gaskets
sewerage for
for
applications.
sewerage
sewerage
applications.
No risk applications.
of performance loss through UV degradation
Wide range of flanges available in PN10-PN40.
EPDM gaskets are supplied for use in potable water applications and Nitrile gaskets for
sewerage applications.
7171
81
71
Section 3: Joints
PCD
PCD
PCD
PCD
gg
gg
DD
DD
b b
b b
a a
a a
Tables 21 & 22 provide additional information regarding fixed flange joint dimensions.
9 & 20 provide additional information
Tables 17, 18, regarding
19 & 20 provide fixed flange
additional joint dimensions.
information regarding fixed flange joint dimensions.
Table 21: Fixed flanges PN16
Flanges PN16 Flanges
Table 17:
(standard
Fixed Flanges
range) PN16 Flanges (standard range)
Prod Code Bolt Hole Details Bolt size
DN DBolt Hole gDetails a b Bolt Hole
Bolt Size
Details Bolt Size
D g DN aWaterD b Sewer g PCD a No. b Dia PCD PCD
Dia No. No.
Length (mm)
Dia Dia DiaDia Length
Length (mm)
(mm)
200 132 8080 228458
19.0 200 16.0228480 132 160 200 19.0 813216.0 19.0
19 16016.0M16 8160 65 8 19 19 M16M16 65 70
220 100 228460
156 100 19.0 220 16.0 156 180 19.0 228481 220 815616.0 19.0
19 180 16.0M16 8 180 8
65 19 19 M16
M16 65 70
285 211150 150 19.0 228471285 16.0228482 211 240 285 19.0 821116.0 19.0
23 24016.0M20 8240 70 8 23 23 M20
M20 70 80
340 266200 200 20.0 228472340 17.0228483 266 295 340 20.0 1226617.0 20.0
23 29517.0M20 12295 70 1223 23 M20
M20 70 80
400 250 228473
319 250 22.0 400 19.0 319 355 22.0 228484 400 1231919.0 22.0
28 35519.0M24 12355 85 1228 28 M24
M24 85 90
455 370300 300 24.5 228474455 20.5228485 370 410 455 24.5 1237020.5 24.5
28 41020.5M24 12410 85 1228 28 M24
M24 85100
520 429 350 26.5 520 22.5 429 470 520
350 228475 228486 26.5 1642922.5 26.5
28 47022.5M24 16470 85 1628 28 M24
M24 85100
580 400 228476
480 400 28.0 580 24.0 480 525 28.0 228487 580 1648024.0 28.0
31 52524.0M27 16525 100 1631 31 M27
M27 100100
640 548450 450 30.0 228477640 26.0228488 548 585 640 30.0 2054826.0 30.0
31 58526.0M27 20585 100 2031 31 M27
M27 100110
715 609 500 31.5 715 27.5 609 650 715
500 228478 228489 31.5 2060927.5 31.5
34 65027.5M30 20650 110 2034 34 M30
M30 110115
840 600 228479
720 600 36.0 840 31.0 720 770 36.0 228490 840 2072031.0 36.0
37 77031.0M33 20770 120 2037 37 M33
M33 120130
910 794700 700 39.5 229045910 34.5229054 794 840 910 39.5 2479434.5 39.5
37 84034.5M33 24840 130 2437 37 M33
M33 130135
1025 901 800 43.0 1025 38.0 901 950 1025
800 229047 229056 43.0 2490138.0 43.0
40 95038.0M36 24950 140 2440 40 M36
M36 140155
1125 900 229050
1001 900 46.5 1125 41.5 1001 1050 46.5 229058 1125 28100141.5 46.5
40 105041.5M36 1050
28 140 2840 40 M36
M36 140155
1255 111210001000 50.0 229051
1255 45.0229060 1112 11701255 50.0 281112
45.0 50.0
43 117045.0M39 1170
28 160 2843 43 M39
M39 160165
1355 1218 1100 53.5 1355 48.5 1218 12701485
1200 229052 229061
53.5 321328
48.5 57.0
43 127052.0M39 1390
32 160 3243 49 M45
M39 160190
1400 Enquire Enquire 1685 1530 60.0
1485 1328 1200 57.0 1485 52.0 1328 1390 57.0 32 52.0 49 139055.0M45 1590
32 180 3649 49 M45
M45 Enquire*
180
1685 15301600 Enquire
1400 60.0 1685 55.0 1530 1590 60.0
Enquire 1930
3617055.0 65.0
49 60.0
1590 M45
1820
36 180 4049 56 M52
M45
Enquire*
180
1800 Enquire Enquire 2130 1950 70.0 65.0 2020 44 57 M52 Enquire*
1930 1750 1600 65.0 1930 60.0 1750 1820 65.0 40 60.0 56 1820 M52 40 200 56 M52 200
2000 Enquire Enquire 2345 2150 75.0 70.0 2230 48 62 M56 Enquire*
2130 1950 1800 70.0 2130 65.0 1950 2020 70.0 44 65.0 57 2020 M52 44 220 57 M52 220
*Bolt length will be calculated on a project by project basis.
2345 2150 2000 75.0 2345 70.0 2150
Note.- PN10 & 40 available on request
75.0 70.0
Saint-Gobain PAM UK supplies fixed flange joint sets with full face EPDM/Nitrile gasket and bolts (as per above lengths), nuts and
82
72 two washers per bolt as standard. These joint sets are CESWI 7th edition compliant
Section 3: Joints
Adjustable
Adjustable Flanges
Flanges
Saint-Gobain
Saint-Gobain PAM UK PAMareUK is able
are
able totooffer
toable
offer adjustable
offer adjustable
adjustable flanges
flanges on aon
flanges a range
on
range of fittings
a range in in in
of fittings
of fittings
DN80-600
DN80-600
DN80-600.
DN80-600. On a selected
On a selected number number of flanged
of flanged fittingsfittings Saint-Gobain
Saint-Gobain PAM UK PAMwillUK will provide
provide
a a
c c adjustable
adjustable flangesflanges
as the as the standard
standard product product
range.range.
PleasePlease refer
refer to the to the product
product range range
sectionsection for details.
for details.
Adjustable
Adjustable flangesflanges haveused
have been beenfor
used for25
over over 25 in
years years in Europe.
Europe. Adjustable
Adjustable flanges flanges
facilitate
facilitate flangeflange assembly
assembly by allowing
by allowing the flange
the loose loose flange to be rotated
to be rotated and positioned
and positioned to to
D
D
g
g
alignholes.
align bolt bolt holes. Saint-Gobain
Saint-Gobain PAM UK PAMcanUK canoffer
also alsoanoffer an additional
additional range range of flanged
of flange
fittingsfittings with adjustable
with adjustable flanges,
flanges, pleaseplease
contactcontact Technical
Technical Sales department
Sales department for further
for further
information,
information, Tel:930
Tel: 0115 0115 930 0650/0700.
0650/0700.
The
The key key benefits
benefits offeredoffered by adjustable
by adjustable flangesflanges are&time
are time & effort
effort saved saved
on site,on site,
particularly
particularly above above
groundground or in pumping
or in pumping stations/treatment
stations/treatment works.works.
Adjustable
Adjustable foralignment
for easy easy alignment if flanges
if flanges are off-set
are off-set
Able toAble
to quickly
quickly changechange
flangeflange to higher/lower
to higher/lower rating rating
Jointare
Joint sets sets are available
available to for
to order order
usefor useadjustable
with with adjustable flanges,
flanges, thesecontain
these sets sets contain
all all
components
components required
required for adjustable
for adjustable flangedflanged
joints.joints.
Metal
Metal insert insert
gasketgasket
Mildbolts,
Mildsteel steel nuts
bolts,and
nuts and washers
washers
Note: Adjustable
Note: Adjustable flanges
flanges utiliseutilise different
different bolt lengths
bolt lengths toflanges.
to fixed fixed flanges.
PleasePlease refer to
refer to
adjustable
adjustable data for
data sheet sheet
boltforlengths;
bolt lengths; ref: PAMRF03.
ref: PAMRF03. This isThis is available
available from from
www.saint-gobain-pam.co.uk.
www.saint-gobain-pam.co.uk.
4 74 83
Section 3: Joints
Table 24: Adjustable flanges joint sets
Product Code
DN
Adjustable Flanges
WATER SEWER
Kit reference (incl. gasket, bolts, nuts and washers Gasket Bolt and nut Washer
300 JBB30KV2
align bolt holes. Saint-Gobain PAM UK canJBB30GW1 JXM24BM130
also offer an additional JXM24RQE
range of flange
Gasket fittings with adjustable
Bolt and nut flanges,
Washer please contact Technical
Gasket Sales department
Bolt and nut for further
Washer
information, Tel: 0115 930 0650/0700.
350 JBB35GV1 JXM24BM130 JXM24RQE JXM24BM130 JXM24RQE
450 JBB45GV1
particularly above ground
JXM27BM130
or in pumpingNitrile
JXM27RQE
gasket
stations/treatment works.
JXM27BM130 JXM27RQE
not available
500 JBB50GV1
Adjustable for easy alignment
JXM30BM160 JXM30RQEif flanges are off-set JXM30BM160 JXM30RQE
Able to quickly change flange to higher/lower rating
600 JBB60GV1 JXM33BM180 JXM33RQE JXM33BM180 JXM33RQE
Joint sets are available to order for use with adjustable flanges, these sets contain all
components required for adjustable flanged joints.
Metal insert gasket
Mild steel bolts, nuts and washers
Note: Adjustable flanges utilise different bolt lengths to fixed flanges. Please refer to
adjustable data sheet for bolt lengths; ref: PAMRF03. This is available from
www.saint-gobain-pam.co.uk.
84
74
Section
Section 4
Pipe Lining
Pipe Lining
75
85
75
Section 4: Pipe Linings
Pipe Linings
Saint-Gobain PAM UK is highly experienced in providing high performance and
fit-for-purpose linings for use with both potable water and sewage. All linings used by
Saint-Gobain PAM UK conform to the requirements of the latest versions of BS EN 545
for use with potable water. Sewage linings conform to BS EN 598.
The standard linings offered by Saint-Gobain PAM UK are suitable for virtually all water
and sewer applications within the UK. However, Saint-Gobain PAM UK has access to a
wide range of specific solutions to suit even the most demanding requirements.
Water Water
Potable Pipes
Since
All potable
ductile ironwater
pipesmay prove
for use aggressive
with for pipelines
potable water due to its
are approved by mineral composition
the Secretary of Stateor to
treatment
for products,
use in public ductile
water iron under
supplies pipelines are lined31
Regulation with an internal
of the coating.
Water Supply (Water
Quality) Regulations 2000 and are listed in the List of Approved Products and
All ductile iron pipes for use with potable water are approved by the Secretary of State
Processes published by the DWI.
for use in public water supplies under Regulation 31.4.a of the Water Supply (Water
Quality) Regulations 2000, Regulation 27 of the Water Supply (Water Quality) (Scotland)
The internal 2001
Regulations surfaces
and of
arealllisted
sizesinofthe
ductile iron
List of pipes used
Approved for theand
Products conveyance ofpublished
Processes raw
by the
and DWI. water, are protected against corrosion by the use of cement mortar
potable
linings. Cement mortar linings create an alkaline environment at the metal surface of
the pipe thereby producing conditions under which corrosion cannot take place.
Cement mortar linings are applied in accordance with BS EN 545.
86
76
Standard Offer:
Ductan: Potable
System XL: water
Potable OD75-160
Water - Blutop range
DN80-800
Traditionally,
Saint-Gobainthe PAMinternal liningXL
UK System forisductile iron pipes
the standard pipehas been for
system cement mortar.
diameters upFor
to the
and
Blutop
including DN800. The system comprises an epoxy seal coat applied to the cement called
range, the cement mortar is replaced by an innovative thermoplastic coating
Ductan.
mortar lining under factory conditions with tight control over process parameters.
Main characteristics:
Saint-Gobain
300m thickPAM UK System XL controls both inorganic and organic leachates to
Perfectly adherent,
exceptionally withWhen
low levels. an adhesion
used invalue greaterwith
accordance thanSaint-Gobain
8MPa (80kg/cm2) the same as
PAM UK
fusion bonded epoxy. DUCTAN withstands without damage:
recommendations, System XL controls the pH within regulatory limits, for all waters,
perforation under load
hard and soft. The current Saint-Gobain PAM UK System XL Instructions for Use
cuts on site
document may be found on the website: www.saint-gobain-pam.co.uk
Approved by the Secretary of State under Regulation 31.4.a of the Water Supply (Water
Quality) Regulations 2000
Features and benefits of Saint-Gobain PAM UK System XL:
Advantages:
Availablesmooth
Perfectly in diameters utisurface,
internal DN800DUCTAN minimizes head losses
Extra-light,
Suitable forDUCTAN reduces
all water types the pipe weight by 25 %
Thinner than the cement coating, DUCTAN increases the pipes hydraulic cross-section.
pH controlled within regulatory limits
Exceptional abrasion resistance
Anti-corrosion
Residence timesprotection
compatiblefor 100
withyears
normal commissioning and operating conditions
In
addition,
Approvedthe
by DUCTAN liningofisState
the Secretary impact resistant
under and therefore
Regulation does
31 of the not Supply
Water flake in (Water
case of
point impact.
Quality) Regulations 2000
The Ductan lining
Excellent covers
Hydraulic the inside of the pipe completely from the socket to the end of the
Performance
spigot
Socket Coating
Cement
Socket areas mortar
which comelinings
into contact with potable water are coated with an approved
blue epoxy
Cement paint.
mortar linings create an alkaline environment at the metal surface of the pipe
thereby producing conditions under which corrosion cannot take place. Cement mortar
System
linings CL: Potable
are applied in accordanceWater DN900-2000
with BS EN 545. Saint-Gobain PAM UK applies two types of
cement mortar linings: System CL and System XL
Saint-Gobain PAM UK System CL is the standard pipe system for diameters DN900-
2000. Saint-Gobain PAM UK System CL comprises a cement mortar which fully
complies with BS EN 545 and is applied as a pipe lining under strict factory conditions.
1) System CL : Potable Water DN80-2000, Natural range
When used in accordance with Saint-Gobain PAM UK System CL Instructions for Use
Saint-Gobain PAM UK
document, System CLSystem CL is thepH
gives excellent standard pipe system
and leachate for diameters
performance DN80-2000.
for hard and soft
System CL comprises blast furnace cement
waters, even with extended residence times.
which fully complies with BS EN 545 and is
applied as a pipe lining under strict factory conditions.
When used
Features in benefits
and accordance with Saint-Gobain
of Saint-Gobain PAM
PAM UK UK System
System CL: CL Instructions for Use
document, System CL gives excellent pH and leachate performance for hard and soft waters,
Available
even in diameters
with extended DN900-2000
residence times.
Suitable
Features andforbenefits
all wateroftypes
Saint-Gobain PAM UK System CL:
Available in diameters DN80-2000
pH controlled within regulatory limits
pH controlled within regulatory limits
Residence times compatible with normal commissioning and operating conditions
Residence times compatible with normal commissioning and operating conditions
Approved
Approved byby the
theSecretary
SecretaryofofState
Stateunder
underRegulation
Regulation31.4.a
31 ofof the
the WaterSupply
Water Supply(Water
(Water
Quality)
Quality)Regulations
Regulations2000
2000
Excellent hydraulic performance
Excellent hydraulic performance
Socket areas which come into contact with potable water are coated with an approved blue
epoxy paint.
Socket Coating
Socket areas which come into contact with water have a coating of approved bitumen
paint.
87
77
Section
Section
Section
Special Requirements
Special Requirements
4: 4:Pipe
DN900+
2) SystemLinings
Special Requirements Soft Water
XL: Potable WaterSolutions
DN80-700, Natural range
DN900+
Upon request Linings Soft
PAM Water
UK is also Solutions
4:
Saint-Gobain PAM UK System XL is the standard pipe system for diameters up to and
lining
Upon which
request isSaint-Gobain
particularly suitable
PAM UKfor use
is also in soft
able water
toseal
supply areas and/or
aapplied
seal coatedwhere
cement long
mortar
DN900+
including Linings
DN700. The systemSoft Water
comprises Solutions
an epoxy coat to the cement mortar
Linings
Pipe
residence
lining times
under
which in excess
factory
is particularly ofsuitable
conditionsthose
withdefined
tight
for use in
in the
control System
softover CL Instructions
process
water areas parameters.
and/or where for Use
Saint-Gobain
long
Linings
Upon
PAM UK request
document
residence are Saint-Gobain
System
times XL controlsof
envisaged.
in excess PAM
both
This UK is also
inorganic
solution
those defined able
and
is approved
in thetoSystem
supply
organic ainseal
for leachates
use
CL coated cement
to exceptionally
public water
Instructions mortar
lowas
supplies
for Use
levels.
lining which
Saint-Gobain is particularly
PAM UK suitable
Snowcrete. for
Pleaseuse in soft
contact water
the areas
Technical and/or
Service
document are envisaged. This solution is approved for use in public water supplies as where long
Department,
Linings
residence
Tel:
When 0115
used
Saint-Gobaintimes
930
in PAM in UK
excess
0650/0700
accordance of
for
withthose
more
Snowcrete. defined inPAM
information.
Saint-Gobain
Please the UKs
contact System CL Instructions
Instructions
the Technical for Use,
Service for Use XL
System
Department,
document
controls
Tel: 0115the are
930pH envisaged. This
within regulatory
0650/0700 solution
for morelimits. is approved
information. for use in public water supplies as
DN80-800
Saint-Gobain
Features andPAM Blast
benefits of Furnace
UK Snowcrete. Please
Saint-Gobain Cement
contact
PAM the Technical
UK System XL: Service Department,
DN80-800
Tel: 0115 930
Available inPAM
Saint-Gobain Blast
0650/0700
diameters
UK can Furnace
for
uti more
DN700
also Cement
information.
offer blast furnace cement in the diameter range DN80-
Recommended
800, this lining for
is the soft water areas
Saint-Gobain PAM UKsame as that
can also offerused
blastfor PAM Directional.
furnace cement in the Blast Furnacerange
diameter Cement is
DN80-
DN80-800
pH controlled
approved for use
Blast
within
in
Furnace
regulatory
potable water limits Cement
applications by the Secretary of State in accordance
800, this lining is the same as that used for PAM Directional. Blast Furnace Cement is
Residence
Saint-Gobain times
PAM compatible with normal commissioning and
theoperating conditions
with Regulation
approved for use 31inUK
of can Water
the
potablealso offer
water blast(Water
Supply furnace
applications cement
Quality)
by in
Regulations
the Secretary diameter
of 2000.
State inrange DN80-
accordance
Approved
800, this by
lining the
is theSecretary
same asof State
that under
used for Regulation
PAM 31.4.a
Directional. of the
Blast Water
Furnace Supply
Cement (Water
is
with Regulation 31 of the Water Supply (Water Quality) Regulations 2000.
Quality) Regulations 2000
Instructions
approved for use in for Use:
potable
Excellent Hydraulic Performance
water applications by the Secretary of State in accordance
Instructions
with
The
Regulation
Saint-Gobain
31 for
of theUse:
Water Supply (Water Quality) Regulations 2000.
Socket areas whichPAM comeUKinto
instructions for use
contact with documents
potable water are forcoated
SystemwithXL, an
System CL blue
approved
and
The Snowcrete
paint. arePAM
Saint-Gobain available to download for from our website: forwww.saint-gobain-
Instructions
epoxy
pam.co.uk/alldownload.cfm
forUKUse:
instructions use documents System XL, System CL
and Snowcrete are available to download from our website: www.saint-gobain-
Note.-
The Saint-Gobain PAM UK instructions for use documents for System XL, System CL
pam.co.uk/alldownload.cfm
The Saint-Gobain PAM UK instructions for use documents for System XL and System CL are
and Snowcrete
available are available
on request. to download
Please contact from our
our Technical website:
Sales www.saint-gobain-
Department on 0115 930 0700.
Sewerage Pipes
pam.co.uk/alldownload.cfm
Sewerage Pipes
High Alumina Cement Mortar Lining: Sewerage
Sewerage Pipes
High Alumina Cement Mortar Lining: Sewerage
DN80-2000
DN80-2000
High Alumina
Saint-Gobain Cement
PAM UK supplies Mortar
its standard Lining:
sewer Sewerage
Sewerage
pipes with a high alumina cement
mortar lining to allow for extreme operating conditions ranging
Saint-Gobain PAM UK supplies its standard sewer pipes with a high from pH 4 (highly
alumina cement
DN80-2000,
DN80-2000 Integral Range
acidic) to pH 12 (highly alkaline). High alumina cement mortar linings conform to the
mortar lining to allow for extreme operating conditions ranging from pH 4 (highly
Saint-Gobain
requirements
acidic) PAM
to pH 12 BSUKENsupplies
of(highly 598 andits standard
offer
alkaline). high
High sewer
abrasion
alumina pipes with
resistance.
cement a high
mortar alumina
linings cement
conform to the
mortar lining to
requirements BS ENfor
of allow 598operating
extreme conditions
operating
and offer ranging
conditions
high abrasion from pH 4from
ranging
resistance. (highly
pH acidic)
4 (highly
Socket
to pH 12
acidic) Coating
to(highly
pH alkaline).
12 (highly High alumina
alkaline). cement mortar
High alumina cementlinings
mortarconform to the to the
linings conform
Socket
requirements
Socket areasCoating
of
of BS
BS EN
EN 598
598 and
andoffer
offerhigh
highabrasion
abrasion resistance.
resistance.
which could come into contact with effluent receive a coating of red
epoxy paint.
Socket areas which could come into contact with effluent receive a coating of red
Socket Coating
epoxy paint.
Socket
Benefitsareas which
of high could cement:
alumina come into contact with effluent receive a coating of red
Benefits of high alumina cement:
epoxy paint.
Benefits of high alumina cement:
Resistance to septic attack
Socket areas which
Resistance could
to septic come into contact with effluent are coated with a epoxy paint.
attack
Resistance
Resistance to
to septic attack
chemical attack
Benefits of high
Resistance alumina attack
to chemical cement:
Resistance
Resistance to
Resistanceto
Resistance
chemical
toabrasion
abrasion attack
to septic attack
Resistance to abrasion
Resistance to chemical attack
Resistance to abrasion
88
78
78
Benefits to
Resistance High Alumina
Septic AttackCement Mortar Lining (Integral range)
Benefits to
Resistance High Alumina
Septic AttackCement Mortar Lining (Integral range)
Resistance toflowSeptic Attack A two year test (see fig 1) to compare
Sewers are occasionally at risk from attack due to the septicity of effluents, particularly
during periods of low or high temperature.
the resistance of High Alumina and other cements found that High Alumina cement
Sewers are occasionally at risk from attack due to the septicity of effluents, particularly
offers excellent resistance to septic attack.
during periods of low flow or high temperature. A two year test (see fig 1) to compare
the
Fig:resistance
1 of High Alumina and other cements found that High Alumina cement
offers excellent resistance to septic attack. Cold Water
Cold Water
Inlet Overflow
Fig: 1
Cold Water
Cold
Air Water Cement
Inlet
+ Overflow Iron
H 2S Cement Effluent
Iron
Air Cement
+ Iron
Water at 37C Cement Water at 37C
H 2S Effluent
Iron
Type of Cement
Water at 37C Attack depth at water line
Water at 37C
Blast Furnace 1.7mm to 2mm
Portland A 1.9mm to 2.3mm
Type of Cement Attack depth at water line
Portland B 1.7mm
Blast Furnace 1.7mm to 2mm
Sulphate Resisting 4.4mm
Portland A 1.9mm to 2.3mm
High Alumina 0.6mm (surface layer only)
Portland B 1.7mm
Sulphate Resisting 4.4mm
High Alumina 0.6mm (surface layer only)
Resistance
Resistance to ChemicaltoAttack
Chemical Attack
Resistance
Resistance toAttack
toChemical
Chemical Attack
Attack
Sewers are at risk from attack by chemicals found in industrial discharges. Table 22
30
Resistance to Chemical
shows the resistance of high alumina cement, compared to ordinary Portland cement,
against some common aggressive substances.
26
Sewers are at risk from attack by chemicals found in industrial discharges. Table 22
30
shows the resistance of high alumina cement, compared to ordinary Portland cement,
Table 30
22 Resistance of High Alumina Cement Vs. Portland Cement
against some common aggressive substances.
Limitation of Resistance (mg/2)
Table30
Table 26:Resistance
22 Resistance
ofof High
High Alumina
Alumina Cement
Cement Vs.vs. Portland
Portland Cement
Cement
Effluent Aggressive
Example Substance Portland High Alumina
Limitation of Resistance (mg/2)
Cement Cement
Effluent Aggressive
Example Substance Portland High Alumina
Chemical Condensate Ammonia < 30 < 2000
Cement Cement
Effluents Magnesium < 300 No limit
Chemical Condensate Ammonia < 30 < 2000
Mine Waters Sulphates < 400 No limit
Effluents Magnesium < 300 No limit
Raw Waters CO2 < 20 No limit
Mine Waters Sulphates < 400 No limit
pH Range > 5.5 4 to 12
Raw Waters CO2 < 20 No limit
89
79
Section 4: Pipe Linings
Table 23:
Table 27: Chemical
Chemical Resistance
Resistance
Alcohols
Ethanol 50% No limit No limit
Methanol 50% No limit No limit
Glycol No limit No limit No limit
Aliphatic Hydrocarbons
White Spirit No limit No limit No limit
Petrol, Diesel, Gas, Oil No limit No limit No limit
Kerosene No limit No limit No limit
Aromatic Hydrocarbons
Xylene Toluene No limit No limit No limit
Benzene, Styrene, Naphtha No limit No limit Not suitable
Oils
Lubricants, Petrol, Derivatives No limit No limit No limit
Organic No limit No limit No limit
Detergents
Teepol No limit No limit No limit
Water
Soft Water No limit No limit No limit
Saline Solution No limit 10% No limit
Distilled Water No limit No limit No limit
Chlorinated Water No limit No limit No limit
Chlorinated Solution
Trichloroethylene No limit 10% Not suitable
Chloroform No limit 10% Not suitable
Genklene No limit 10% Not suitable
Acids
Actic 40 ppm 40 ppm No limit
Chromic 10 ppm 10 ppm No limit
Citric 20 ppm 20 ppm No limit
Hydrochloric 3 ppm 3 ppm No limit
Lactic 15 ppm 15 ppm No limit
Nitric 6 ppm 6 ppm No limit
Oxalic 12 ppm 12 ppm No limit
Phosphoric 10 ppm 10 ppm No limit
Sulphuric 10 ppm 10 ppm No limit
Tannic 200 ppm 10% No limit
Tartaric 50 ppm 50 ppm No limit
Bases
Ammonia 18% 40% No limit
Aniline No limit No limit No limit
Dimethylamine 0.6% No limit No limit
Phenol/Cresol No limit No limit No limit
Potassium Hydroxide 560 ppm 500 ppm No limit
Pyridine No limit No limit No limit
Quinoline No limit No limit No limit
Sodium Hydroxide 400 ppm 400 ppm No limit
Trimethylamine No limit No limit No limit
Salts
Sodium Chloride 25% 10% No limit
Potassium Chloride 25% 10% No limit
Ammonium Sulphate 5% 10% No limit
Please consult us regarding the suitability of Integral for conveyance of other industrial effluents.
90
80
Resistance toResistance
Abrasion to Abrasion
Abrasion is the degradation of the internal lining of the pipe due to the impact of solid
particles contained in the effluent.
High alumina cement lining used by Saint-Gobain PAM UK offers excellent resistance
to abrasion. The lining allows regular maximum flow rates of 7m/s with minimal
abrasive attack in each of the applications.
The effect of abrasion can be calculated from the formula: U=K x V3 N1/2 10-4
U= Wear in mm per annum
K= The coefficient characteristic of the material (the lower the value, the greater
the resistance to abrasion)
Resistance to Septic Attack
V= Flow rate m/s
N= Characteristic of particle abrasiveness (according to the Miller Index)
Sewers are occasionally at risk from attack due to the septicity of effluents, particularly
Table 28periods
during24 demonstrates the or
of low flow superior abrasion resistance
high temperature. of High
A two year test Alumina
(see fig 1)cement in
to compare
comparison with
the resistance mostAlumina
of High other common sewer
and other pipeline
cements materials.
found As greater
that High Alumina effluent
cement
velocities can beresistance
offers excellent permitted,tosavings at the design stage can be achieved by avoiding
septic attack.
manhole backdrops or flow control chambers on steep inclines.
Fig: 1
Cold Water
Cold Water
Table
Table 24
28 Abrasion resistance of High Alumina Cement vs. Other materials
Inlet Overflow
Abrasive K value
Air Cement
+
Basalt/Polyurethane 5 to 15 Iron
H 2S Cement Effluent
Iron
High alumina cement/Natural rubber 15 to 30
Water at 37C Water at 37C
Unlined iron 30 to 50
Special to
Resistance requirements
Special requirements:
Chemical Attack
Sewers
For are at<pH4
effluents risk from attackSaint-Gobain
or >pH12 by chemicalsPAM
found
UKinplc
industrial discharges.
offers a pH1 Table 22
pipe-system. For
Intergral pH1
shows the resistance
information of highTechnical
please contact aluminaSales
cement, comparedTel:
Department, to ordinary
0115 930Portland cement,
0650/0700.
against some<pH4
For effluents common aggressive
or >pH12 substances.
Saint-Gobain PAM UK plc offers a pH1 pipe-system. For
information please contact Technical Sales Department, Tel: 0115 930 0700.
Table 22
Thickness
Lining thicknesses for pipes are in accordance with the latest version of BS EN 545/BS
EN 598. The standard allows for the lining thickness to taper down at the end of pipes
and fittings. Please refer to BS EN 545/BS EN 598 for lining thicknesses.
Lining Condition
The surface of the lining will be substantially smooth but may occasionally contain
longitudinal and circumferential shrinkage cracks which do not affect the stability of
the lining. The widths of the cracks and any radial displacement at the cracks will not
exceed the values given in BS EN 545/BS EN 598. These shrinkage cracks are
permissible under the relevant product standards and close on continuous exposure to
water - a process known as autogenous healing. Jointing surfaces i.e the inside of
sockets and flange faces are free from cement mortar.
Installation Instructions
For guidance on testing and commissioning of pipelines, lining repair, installation
guidance and storage instructions please download the Installation Guide from our
website, www.saint-gobain-pam.co.uk.
92
82
Sectio5
Section
Pipe Coating
Pipe Coating
83
93
83
Section 5: Pipe Coatings
External Coatings
Saint-Gobain PAM
PAM UKUKoffers
offersaarange
rangeofofproven
provenexternal
externalcoatings
coatingstotosuit allall
suit types ofof
types
ground conditions. The
ground conditions. Thestandard
standardcoating
coatingisisZinalium, Saint-Gobain
Saint-Gobain PAM UKPAM zinc UKs
and zinc and
aluminium
aluminium alloy
alloy system. system.
First Firstwith
launched launched with PAM
PAM Natural Natural
Water Water
pipe. This pipe. Thisiscoating
coating is now
now available
available on PAM Integral Plus sewer pipe and on Blutop water pipe as standard.
on PAM Integral Plus DN80-800 sewer pipe as standard.
For extreme soil conditions a wide variety of special coating systems can be offered.
To ensure the most cost effective and appropriate solution is supplied, Saint-Gobain
PAM UK offers soil resistivity surveys, please see Table 10.
page 10.
Table
Table 29: Matrix of coating available from 25: Matrix of
Saint-Gobain PAMcoatings
UK. available from Saint-Gobain PAM UK.
Zinalium
Tape Wrap
Product
Product Dia (Zinc/
Zinc & Zinc &&
Zinc ZincZinc
& & PETape Wrap Tape Wrap PE PUX
Dia RangeAluminium) + 25mm or ZM-U ZM-U TT
Range
Range Range Aluminium Bitumen
Bitumen Epoxy
Epoxy Sleeving25% 55% 55mm (Polyethylene) (Polyurethane)
Epoxy
Directional
Standard
Drill Pipes
Water Standard Special Special Special request
DN800 Optional
Pipe (Natural) request* request (TT range)
Standard
DN900- Special Special Special request
Optional (Classic) -
DN1000 request* request (TT range)
Black
Standard
DN900- Special Special Special request
(Classic) -
DN2000 request request (TT range)
Black
Special request
Uti Standard Standard Special Special
uti DN700 only
DN800 (Integral Plus) (Integral) request * request
(TT range)
Sewerage
Pipe
Special request
DN900- Standard Special Special
DN800-2000
DN2000 (Integral) request request
(TT range)
Directional
Standard
Drill pipes DN100-
(PAM
- Water & DN700
Direxional)
Sewer
Natural
Ref soils Protection
with a pH< 5 without
Systems Availability
R A a A
water table
95
85
Section 5: Pipe Coatings
Robustness
The PAM Natural/Integral Plus system has been tested under real life conditions and
has been shown to withstand the extremes of handling, transportation and laying
without compromising the protective coating.
96
86
Section 4: Pipe Linings
Zinc/Aluminium
Zinc/ Aluminium Alloy
Lining Thickness & Alloy
Condition: Water & Sewerage pipe linings
40 years
How of Research
it works:
Thickness
and Development
The coating utilises an 85% zinc/15% aluminium alloy which gives increased longevity
Lining thicknesses
of the active corrosion for pipes are in layer.
protection accordance with the latest version of BSLaunch EN 545/BS
of
the BLUTOP range
EN 598. The standard allows for the lining thickness to taper down at the end of pipes
Zinc ions within therefer
alloyto provide Complete
and fittings. Please BS EN sacrificial
545/BS ENgalvanic
598 for protection
characterization
to areas which may
lining thicknesses.
Launch
have been damaged during the transportation, of the zinc-aluminium
handling orNATURAL
of the installation
range of the pipe.
alloys in the DN 60 to 300
Lining
Once
Discovery
Condition
the pipe
of the alloy DUNOY
has been installed and is in contact with the surrounding soil the zinc-
Initial results from
Decisionthe
to launch
Extension of the
aluminum
(zinc alloy provides a long
- aluminium) termtests
in-the-field barrier through formation
a new product using
NATURALof arange
stable
to the
The surface of the lining DN 350 to 600
insoluble protective
Lab testing layer.will be substantially smooth but may occasionally
the zinc-aluminium contain
coating
longitudinal and circumferential
Initial in-the-field tests shrinkage cracks which do not affect the stability of
the lining.aThe
Although widths
coating of thezinc
of pure cracks and any
provides radialprotection
galvanic displacement at the
for the cracks willitnot
1969 - 1970/72 - 1971/72 - 1978 - 1982/1998 - 1998 - 2000 - ductile
2005 - pipe,
2009 is
exceed the values given in BS EN 545/BS EN 598. These
100% active, and its effect can be rapidly depleted. Similarly, although zinc shrinkage cracks areprovides a
permissible
protective layer under when the it
relevant
transforms productintostandards and close on layer
a dense, impermeable continuous
of zincexposure to
salts, these
Using zinic aluminium alloys instead of zinc means:
water - a process known as autogenous
salts can only form under specific conditions. healing. Jointing surfaces i.e the inside of
sockets and flange faces are free from cement mortar.
If zinc
A Galvanic protection
transforms offered
too quickly theby zinc
resulting passive layer is of poor quality. The
High performance epoxy Installation
An Imporoved
presence of aluminum Instructions
chemical and
slows mechanical
this stability
conversion, by considerably decreasing the rate at
coating > 100m
Forofguidance
which the
thecoating thanks
zinconistesting to the
transformed; use of aluminium
and commissioning ofmore
and creating a stablelining
pipelines, protective
repair,layer compared to
installation Blue epoxy
Metallic zinc/aluminium (pore-sealer)
coating (400g/m2)
zinc alone,and
guidance whilst allowing
storage the sacrificial
instructions pleasegalvanic
download healing process toGuide
the Installation take place.
from our ZnAI alloy
website, www.saint-gobain-pam.co.uk. Ductile
Epoxy socket coating Iron
(>40m) The dual structure (islands of zinc within the aluminium skeleton) of the alloy used on
The protective layers stick to the
Cement mortar lining PAM Natural/Integral Plus means the duration of active protection
ductile increases
iron pipe perfectly, covering
the entire barrel and socket.
(System XL water/HAC significantly.
Sewer) The scientific explanation
Ductile Iron
Zinalium offers an active protection to ductile iron pipes, thanks to the power of galvanic
protection offered by the alloy ZnAL 85-15.
If zinc transforms too quickly the resulting passive layer is of poor quality. The
High performance epoxy
coating > 100m
The quantity
presence of slows
of aluminum alloythisapplied
conversion, by considerably decreasing the rate at
which the zinc is transformed; and creating a more stable protective layer compared to
Metallic zinc/aluminium Increasing the thickness of the alloy over the minimum specified standard (EN 545 or
zinc alone, whilst allowing the sacrificial galvanic healing process to take place.
coating (400g/m2) EN 598) results in exponential increase in the longevity of the coating, offering greater
Epoxy socket coating protection in a wider range of soils.
(>40m) The dual structure (islands of zinc within the aluminium skeleton) of the alloy used on
Cement mortar lining PAM Natural/Integral Plus means the duration of active protection increases
(System XL water/HAC significantly.
Sewer)
Ductile Iron
82 97
87
Section 5: Pipe Coatings
400.00 Zn + SC A
Zn + SC B
Increasing the weight of zinc does not significantly extend the lifetime when exposed to an
aggressive
600.00 environment. The extra zinc is rapidly consumed by auto-corrosion and does not
produce the stable conversion layer that is needed for long term durability. Fig 2 shows how
the protection given to ductile iron by zinc rapidly ceases in aggressive environments.
800.00
1000.00
1200.00
0 100 200 300 400 500 600 700 800 900
KEY
A negative potential of more than 750 mV (with respect to a saturated calomel
electrode) is required to prevent corrosion of the ductile iron. This graph shows how
that potential changes after about 450 days for the zinc coatings but remains constant
for the zinc/aluminium coating.
A negative potential of more than 750 mV (with respect to a saturated calomel
electrode) is required to prevent corrosion of the ductile iron. This graph shows how
that potential changes after about 450 days for the zinc coatings but remains constant
Epoxy Topcoat coating.
for the zinc/aluminium
Pam Natural/Integral Plus is finished with a tough, porous epoxy coating. This epoxy
The role of the epoxy layer
coating is applied at an optimum thickness to provide durability and robustness to the
With ZINALIUM,
coating the conventional
but also allow the galvanicblack pore-sealer
action is to
of the zinc replaced by blue epoxy coating
continue:
(signal blue for the Natural range and ultramarine for the Blutop range) or by red epoxy
coating
Able to(for thewith
cope Integral Plus range).
real-life situations i.e. transportation and handling
This tough
Severe porous
impact epoxy
and dropcoating is applied
tests fails to crackatthe
an optimum
epoxy sealthickness
(WRc Ref,toUC
provide
3841)durability
and robustness to the coating but also allow the galvanic action of the zinc to continue.
Scrape tests fail to expose bare metal
The main Improvements provided by the epoxy includes:
Controlled porosity allows the zincs galvanic action to take place
Greater chemical stability
Better long-term performance in soil as it ages
Better control of the zinc-aluminium alloy conversion process (controlled porosity allows
the zincs galvanic action to take place)
Better mechanical resistance of the coating (during transport and use), scrape tests fail to
expose bare metal
Improved resistance to solvents present in the soil (contaminated soil)
Possibility of colouring the pipe to enable easier identification
Better organoleptic (taste/odour) performance
Severe impact and drop tests fails to crack the epoxy seal (WRc Ref, UC 3841)
98
88
Section 5: Pipe Coatings
Supplementary Coating
Supplementary Coating Systems
Systems:
Introduction
Why not apply greater thickness of zinc?
Introduction
Increasing thePAM
Saint-Gobain weight
UK offers
of zincadoes
range not
of significantly
external coatingextendsystems
the lifetime
to suit when
different
exposed
Saint-Gobain PAM UK offers a range of external coating systems to suit different ground
ground
to an aggressive
conditions.
conditions. PAM environment.
PAM (OD
Blutop Natural/Integral
The extra
75-160), Plus
zinc(DN80-800)
Natural is
pipe
rapidly
is theconsumed
standard
and by
pipeline
Integral auto-corrosion
Plus product pipe
(DN80-800)
from
and does
is theSaint-Gobain
not produce
standard PAM
pipelinethe
UKstable
in thefrom
product conversion
diameter range
layer that
Saint-Gobain DN60-800
PAMis and
needed
andfor
can can
be long
be used
used term
in theinmajority of
soilmajority
the conditions
durability. Figof2found
soil
shows inhow
the U.K.
conditionsthefound
protection
in the given
U.K. Forto diameters
ductile irongreater
by zincthan
rapidly
DN800
ceases
Saint-Gobain
in aggressive environments.
PAM UK offers a coating system of zinc plus a top coat. For water (PAM
Large DN Water Pipes) the top coat is bitumen, and for waste water and sewage (PAM
Integral), red epoxy is applied.
Zinc + a Topcoat
Fig 2
Protection of samples exposed in aggressive seawater environment
0.00
For diameters greater than DN800 Saint-Gobain PAM UK offers a coating system of zinc plus
a top coat. For waterKEY
(PAM Classic) the
Zinctop
A coat is bitumen and for waste water and sewage
(PAM200.00
Integral), red epoxy is applied.Zinc B
ZnAI A
Zinc + a Topcoat
Zinc coating is an active protection,ZnAI
dueB to the galvanic action of the zinc/iron.
Mixed potential mV: SCE
400.00 Zn + SC A
The and
Zinc Zincaand
toptop coat
coat works
works in two
in two ways:
Zn + SC B
ways:
Zinc Coated: Deposit of zinc
transformation product healing the Formation
If the zincof
600.00 a stable
coating protective
is damaged layer transport
during and laying, the zinc metal adjacent
damaged area. Under
to thethe top coating,
damage the zinc is transformed
site cathodically protects theinto a passive
exposed iron barrier
until a protection layer,
healing layer of which
adheres tightly to the iron surface.
Deposit of Zinc corrosion product zinc800.00
transformation products forms over the damage site
Zn2+ Current i Damage
Under the self-healing
top coating, the zinc is transformed into a passive barrier protection layer,
If the zinc coating is damaged during transport and laying, the zinc metal adjacent
which adheres tightly to the iron surface
1000.00
to the damage site cathodically protects the exposed iron until a healing layer of zinc
transformation products forms over the damage site.
Metallic Zinc
1200.00
Coating
200g/m02 Zinc
100 + Bitumen:
200 300 Large
400 Diameter
500 600 Water
700 Pipes900
800
Ductile Iron
DN900-2000 Test duration in days
Zinc corrosion
Permeable In the KEYrange
Pore-sealer
diameter Metallic zinc
DN900-2000PipeSaint-Gobain
wall PAM UK offers a products
ductile iron pipe
Seal Coat A negative potential of more than 750 mV (with respect to a saturated calomel
externally coated with 200g/m2 zinc plus bitumen topcoatZn++ . This allows
ions a Current
high degree
i
electrode) is required to prevent corrosion of the ductile iron. This graph shows how
of protection against the majority of soil conditions. This protection system conforms
that potential changes after about 450 days for the zinc coatings but remains constant
to the latest version of BS EN 545.
for the zinc/aluminium coating. Iron
Damage
200g/m2 Zinc + Red Epoxy: PAM Integral DN80-2000
Stable protective layer Damage self-healing
Epoxy
PAM Topcoat
Integral pipes are supplied with a 200g/m2 zinc coating and finished with a tough
red epoxy layer applied in accordance with BS EN 598. The PAM Integral coating
Pam Natural/Integral Plus is finished with a tough, porous epoxy coating. This epoxy
provides a high degree of protection in most soil conditions.
coating is applied at an optimum thickness to provide durability and robustness to the
200g/m Zinc + Bitumen: Large Diameter Water Pipes
2
coating but also allow the galvanic action of the zinc to continue:
DN900-2000
In specific conditions
Able to cope where Saint-Gobains
with real-life situations i.e. standard offer isand
transportation nothandling
suitable, the use of PE
sleeving may be appropriate.
InSevere
the diameter
impactrange DN900-2000
and drop tests failsSaint-Gobain
to crack the PAM UKseal
epoxy offers a ductile
(WRc Ref, UCiron pipe externally
3841)
coated with 200g/m2 zinc plus bitumen topcoat . This allows a high degree of protection
Scrapethe
against tests fail toof
majority expose bare metal
soil conditions. This protection system conforms to the latest version
ofControlled
BS EN 545. porosity allows the zincs galvanic action to take place
88 99
89
Section 5: Pipe Coatings
Special Applications:
In
In certain soils and under
under specific
specific conditions,
conditions, PAM
PAMBlutop/Natural/Integral
Natural/Integral Plus and PlusPAM
andLarge
PAM
DN Water Pipe/Integral, may not offer sufficient protection. For these instances, Saint-
Classic/Integral, may not offer sufficient protection. For these instances, Saint-Gobain PAM
Gobain PAM various
UK can offer UK can alternative
offer various alternative
protection protection
systems. systems.
See table See table
30 detailing 26 detailing
types of soil
types of soil conditions and the appropriate recommended
conditions and the appropriate recommended protection system. protection system.
Zinc + PE Sleeving
ZM-U
How Sleeving
For trenchless Works:
installations Saint-Gobain PAM UK can offer PAM Directional, a ductile
iron pipe specifically designed for trenchless installation. PAM Directional has a coating
The principal function of the polyethylene sleeving is to separate the pipe from contact
which is able to cope with the rigors of trenchless installations. 200mg/m2 of Zinc +
with the soil environment thus preventing non-uniform contact with the soil solids.
ZM-U is applied to Pam Directional pipes to ensure protection from potentially
The system is therefore relatively insensitive to minor handling damage and the
damaging conditions. ZM-U provides protection against damage to pipes being pulled
presence of ground water inside the sleeving. Where major damage to the sleeving is
through rocky conditions and performs in the most extreme conditions.
caused however, repairs must be carried out before laying.
Zinc +
Zinc + Tape
TT (PEC and PUX Coating)
Wrap
Extruded PE
Extruded coating
polyethylene - PEC coating Saint-Gobain PAM UK is also able to supply an external protective systems called TT
In highly aggressive soil conditions Saint-Gobain PAM UK would normally recommend
Tape
(Total
the
Wrapping
useTerrain).
of TapeThe TT (either
Wrap external25%
coating system
or 55mm comprises
overlap). thick organic
However, coatings.
Saint-Gobain PAM (Extruded
UK is
In highly
also able aggressive
to supply
polyethylene soils
an a more
alternative
PEC DN80-700 robust type
external
& sprayed of protection
protective
polyurethane maycalled
systems
PUX be necessary.
TT. The TTSaint-
DN800-2000). external
Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive
coating system comprises thick organic coatings. (Extruded polyethylene PE DN60-700 tape
throughout the diameterPUX
& sprayed polyethylene PUrange. The tape consists of a combined anti-corrosion mastic
DN800-2000).
DN800-2000).
How TT works:
and pressure sensitive adhesive, laminated to a flexible PVC backing.
How TT works:
The TT external coating system uses thick organic coatings. These coatings provide a
How
complete barrierWrap
Tape betweenWorks:
the pipe and the surrounding soil. The TT coating system is
The TT external coating system uses thick organic coatings. These coatings provide a
suitable
The tapefor
complete use inbetween
exhibits
barrier highly
high aggressive
resistance
the pipe soils.
toand
bacterial attack, lowsoil.
the surrounding water vapour
The transmission
TT coating system is
and low water absorption as well as providing
suitable for use in highly aggressive soils. high electrical resistance.
Spray PUpolyurethane
Sprayed coating - PUX coating
Application of
Application ofTape
TT Wrap
TT
DN80-700 pipes are supplied with a nominally 2mm thick polyethylene coating, which is
Tape is factory
DN60-700 applied
pipes around the body
are supplied of the pipe.
2mmThe tape is applied around and
applied using a heat bonding with a nominally
adhesive, co-extrusion thick polyethylene
technique. coating,
DN800-2000 pipeswhich
are
along the pipe until it covers the pipe from the back of the socket to
is applied using a heat bonding adhesive, co-extrusion technique. DN800-2000 pipes a point
supplied with a sprayed polyurethane coating, 900 microns thick. The TT coating system
sufficiently
are suppliedremoved from the
with a sprayed spigot such coating,
polyurethane that it will
900not interfere
microns with
thick. jointing.
The Each
TT coating
minimises risk of damage during transportation and installation.
wrap
system overlaps the preceding
minimises risk of damageone by approximately
during 25mm
transportation or installation.
and 55%, depending upon the
degree of protection required. The tension in the tape results in a protective wrap
which
For moreadheres strongly
information ontoTTthe pipe body,
external completely
coating isolating
please contact it from
Pipes the soil.
Technical Sales
Department, Tel: 0115 930 0650/0700.
100
90
Section 5: Pipe Coatings
Special Applications:
Table 31: TT Water Pipe, Rapid Joint
Allowable Socket
Allowable Pipe Spigot OD
Product In Operating
certain soils and under specific conditions, PAM OD
Natural/Integral Weight
Plus and PAM Large
DN Pipe Class Deflection Length mm
Code (Kg/m)
DNPressure
Water Pipe/Integral,
(Degree)may not offer
(mm) sufficient
(DE)
mmFor these
protection. instances, Saint-
(PFA) (B)
Gobain PAM UK can offer various alternative protection systems. See table 26 detailing
80 SSA80F60AG C40 types of40 soil conditions
5 and the 6000 98
appropriate recommended 167.0
protection 13.5
system.
Details on the size of sleeving required for each pipe diameter with the weight and
700 SSB70G60AG C25 25 4 6000 738 863.0 223.0
approximate length of sleeving per standard roll can be found in the Installation
Guide, www.saint-gobain-pam.co.uk
800 SSB80H70AH C25 25 4 6950 842 974.0 233.0
In highly aggressive soils a more robust type of protection may be necessary. Saint-
1200 SSC12H79AH C25 25 4 8190 1255 1412.5 467.0
Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive tape
throughout the diameter range. The tape consists of a combined anti-corrosion mastic
1400 SSC14H80AH C25 25 3 8170 1462 1592.1 641.0
and pressure sensitive adhesive, laminated to a flexible PVC backing.
The tape exhibits high resistance to bacterial attack, low water vapour transmission
1800 SSC18H80AH C25 25 2.5 8150 1875 2032.2 1004.0
and low water absorption as well as providing high electrical resistance.
Notes.- Tape is factory applied around the body of the pipe. The tape is applied around and
- Lengths and weights are provided for estimation purposes only and
along theactual
pipevalues mayit
until vary from those
covers theprovided in thesethe
pipe from tables
back of the socket to a point
- For information on Rapid gaskets water please refer to page 70
sufficiently
- Allowable test pressure (PEA) and allowable maximum operating pressureremoved from
(PMA) can easily the spigot
be calculated for thesuch
abovethat it using
pipes by will the
notfollowing
interfere with jointing. Each
formulas:
PMA = PFA x 1.2
PEA = PMA + 5 bar wrap overlaps the preceding one by approximately 25mm or 55%, depending upon the
degree of protection required. The tension in the tape results in a protective wrap
which adheres strongly to the pipe body, completely isolating it from the soil.
90 101
Section 5: Pipe Coatings
Special Applications:
Table 32: TT Water Pipe, Universal Vi Joint
Allowable Socket
Allowable Pipe Spigot OD
Product In Operating
certain soils and under specific conditions, PAM OD
Natural/Integral Weight
Plus and PAM Large
DN Pipe Class Deflection Length mm
Code (Kg/m)
DNPressure
Water Pipe/Integral,
(Degree)may not offer
(mm) sufficient
(DE)
mmFor these
protection. instances, Saint-
(PFA) (B)
Gobain PAM UK can offer various alternative protection systems. See table 26 detailing
80 SGA80N60AG C100 types of60soil conditions
3 and the 5970
appropriate recommended
98 protection16.0
159 system.
102
90
Section 5: Pipe Coatings
Special Applications:
Table 33: TT Water Pipe, Universal Ve Joint
Allowable Socket
Allowable Pipe Spigot OD
Product InOperating
certain soils Deflection
and under specific conditions, PAM OD
Natural/IntegralWeight
Plus and PAM Large
DN Pipe Class Length mm
Code (Kg/m)
DNPressure
Water Pipe/Integral,
(Degree)may not
(mm)offer sufficient
(DE)
mm For these
protection. instances, Saint-
(PFA) (B)
Gobain PAM UK can offer various alternative protection systems. See table 26 detailing
100 SFB10N60AG C100 types 64 3 and the5970
of soil conditions appropriate117.8
recommended 188protection
20.0system.
Details on the size of sleeving required for each pipe diameter with the weight and
800 SFB80N70AH C30 25 1.5 6890 840.4 980 282.0
approximate length of sleeving per standard roll can be found in the Installation
Guide, www.saint-gobain-pam.co.uk
900 SFB90N70AH C30 25 1.5 6870 943.2 1087 349.0
In highly aggressive soils a more robust type of protection may be necessary. Saint-
Notes.-
- Lengths and weights are provided for estimation purposes Gobain
only and PAM UK ismay
actual values able
varyto supply
from pipesinwrapped
those provided these tableswith heavy duty self-adhesive tape
- For information on Rapid gaskets water please refer to page 70
- For information on Universal Ve Locking ring please refer throughout
to page 77 the diameter range. The tape consists of a combined anti-corrosion mastic
- Allowable test pressure (PEA) and allowable maximum operating pressure (PMA)
and pressure can easilyadhesive,
sensitive be calculatedlaminated
for the above pipes
to abyflexible
using the PVC
following formulas:
backing.
PMA = PFA x 1.2
PEA = PMA + 5 bar
How Tape Wrap Works:
The tape exhibits high resistance to bacterial attack, low water vapour transmission
and low water absorption as well as providing high electrical resistance.
90 103
Section 5: Pipe Coatings
Special Applications:
Table 34: TT Sewer Pipe, Rapid Joint
Allowable
Allowable Pipe Spigot OD Socket OD
Product Operating In certain soils and under specific conditions, PAM Natural/Integral
Weight Plus and PAM Large
DN Deflection Length mm mm
Code Pressure DN Water Pipe/Integral, may not(DE)
offer sufficient
(B)
(Kg/m)
protection. For these instances, Saint-
(Degree) (mm)
(PFA)
Gobain PAM UK can offer various alternative protection systems. See table 26 detailing
80 TSA80S60BG 40 types of5soil conditions
6000and the appropriate
98 167.0
recommended 13.5
protection system.
Details on the size of sleeving required for each pipe diameter with the weight and
700 TSB70E60BG 29 4 6000 738 863.0 206.0
approximate length of sleeving per standard roll can be found in the Installation
Guide, www.saint-gobain-pam.co.uk
800 TSB80E69BH 28 4 6950 842 974.0 243.5
In highly aggressive soils a more robust type of protection may be necessary. Saint-
1200 TSC12N79BH 29 4 8190 1255 1412.5 513.0
Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive tape
throughout the diameter range. The tape consists of a combined anti-corrosion mastic
1400 TSC14N80BH 28 3 8170 1462 1592.1 686.0
and pressure sensitive adhesive, laminated to a flexible PVC backing.
The tape exhibits high resistance to bacterial attack, low water vapour transmission
1800 TSC18N80BH 27 2.5 8150 1875 2032.2 1045.0
and low water absorption as well as providing high electrical resistance.
104
90
Section 5: Pipe Coatings
Special Applications:
Table 35: TT Sewer Pipe, Universal Ve Joint
Allowable
Allowable Pipe
Prod Operating In certain soils and under specific
Spigotconditions,
OD SocketPAM
ODNatural/Integral
Weight Plus and PAM Large
DN Deflection Length
code Pressure DN Water Pipe/Integral, maymm not (DE)
offer mm (B)
sufficient (Kg/m)
protection. For these instances, Saint-
(Degree) (mm)
(PFA) Gobain PAM UK can offer various alternative protection systems. See table 26 detailing
100 Enquire 64 3 soil conditions
types of 5970 and the 118 188
appropriate recommended 20.0protection system.
250 TFB25N60BG
Zinc46+ PE Sleeving
3 5970 274 350 54.0
350 TFB35N60BG 38
How3 Sleeving
5970
Works:378 463 85.0
Notes.-
Application of PE sleeving
- Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables
Polyethylene
- For information on Rapid gaskets water please refer to page 70 sleeving may be obtained from Saint-Gobain PAM UK for application on
- For information on Universal Ve Locking ring please refer site.
to page 77
Polyethylene sleeving can be fitted on site and no special equipment is needed
- Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the following formulas:
PMA = PFA x 1.2 other than that necessary to lift the pipes and fittings.
PEA = PMA + 5 bar
Details on the size of sleeving required for each pipe diameter with the weight and
Table 36: Socket sleeve for TT Pipes approximate length of sleeving per standard roll can be found in the Installation
Guide, www.saint-gobain-pam.co.uk
Product
DN Material Description
Code
80 JSA80YAT
Zinc
EPDM
+ Tape Wrap Rubber sleeve
800 -
158030 HEPS Heat shrink Roll (30m)
2000
800 -
158098 HEPS Raychem fastners - Pk 25
2000
90 105
Gobain PAM UK can offer various alternative protection systems. See table 26 detailing
e Coatings types of soil conditions and the appropriate recommended protection system.
Zinc
Zinc +
+ PE Sleeving
ZM-U
How Sleeving
For trenchless Works:
installations
installations Saint-GobainPAM
Saint-Gobain PAMUK
UKcan
canoffer
offerPAM
PAMDirexional,
Directional, a ductile
a ductile iron
iron pipe specifically
pipeprincipal
specifically designed
designed for trenchless
for polyethylene
trenchless installation.
installation. PAM PAM Directional
Direxional has a coating
(DN100-700) has a
The function of the sleeving is to separate the pipe from contact
which is able to cope with the rigors of trenchless installations. 200mg/m 2 of Zinc
coating which is able to cope with the rigors of trenchless installations.
with the soil environment thus preventing non-uniform contact with the soil solids. 200mg/m 2
of+Zinc
ZM-U is applied to Pam Directional pipes to ensure protection from potentially
+ ZM-U
The is applied
system to Pamrelatively
is therefore Direxional pipes to ensure
insensitive to minorprotection
handlingfrom potentially
damage and thedamaging
damaging conditions. ZM-U provides protection against damage to pipes being pulled
presence
conditions. ofZM-U
ground water inside
provides the sleeving.
protection Where major
against damage damage
to pipes being to the sleeving
pulled through isrocky
through rocky conditions and performs in the most extreme conditions.
caused however, repairs must be carried out
conditions and performs in the most extreme conditions. before laying.
TT Wrap
Zinc + Tape
In highly aggressive soil conditions Saint-Gobain PAM UK would normally recommend
Extruded PE coating
Tape Wrapping
the use of Tape Wrap (either 25% or 55mm overlap). However, Saint-Gobain PAM UK is
In highly
also able aggressive soils
to supply an a more robust
alternative type
external of protection
protective maycalled
systems be necessary.
TT. The TTSaint-
external
Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive
coating system comprises thick organic coatings. (Extruded polyethylene PE DN60-700tape
throughout the diameter range. The
& sprayed polyethylene PU DN800-2000). tape consists of a combined anti-corrosion mastic
and pressure sensitive adhesive, laminated to a flexible PVC backing.
How TT works:
How Tape Wrap Works:
The TT external coating system uses thick organic coatings. These coatings provide a
The tape exhibits
complete high resistance
barrier between toand
the pipe bacterial attack, lowsoil.
the surrounding water vapour
The transmission
TT coating system is
and low for
suitable water
useabsorption as well as soils.
in highly aggressive providing high electrical resistance.
Spray PU coating
Application
Application of
of Tape
TT Wrap
Tape is factory
DN60-700 applied
pipes aroundwith
are supplied the body of the pipe.
a nominally 2mmThe tape
thick is applied around
polyethylene coating,and
which
along the pipe until it covers the pipe from the back of the socket to a
is applied using a heat bonding adhesive, co-extrusion technique. DN800-2000 pipespoint
sufficiently
are suppliedremoved from the
with a sprayed spigot such coating,
polyurethane that it will
900not interfere
microns with
thick. jointing.
The Each
TT coating
wrap overlaps the preceding one by approximately 25mm or
system minimises risk of damage during transportation and installation.55%, depending upon the
degree of protection required. The tension in the tape results in a protective wrap
which
For moreadheres strongly
information ontoTTthe pipe body,
external completely
coating isolating
please contact it from
Pipes the soil.
Technical Sales
Department, Tel: 0115 930 0650/0700.
90
106 91
Section 5: Pipe Coatings
Cathodic Protection
Ductile iron mains which contain sections that may be buried adjacent to pipelines
with cathodic protection systems or other sources of electrical currents such as train or
tram lines may be subject to eddy currents. In these circumstances further advice
should be sought from Technical Sales Department, Tel: 0115
0115 930
9300700.
0650/0700.
The use of Cathodic protection systems for new ductile iron mains is not
recommended by Saint-Gobain PAM UK for the following reasons:
Other effective and maintenance free protection systems provide suitable
Blutop/Natural/Integral
protection for iron pipelines, e.g. PAM Natural/Integral Plus, polyethylene
Plus, polyethylene sleeving
sleeving
and tapeand tape wrapping.
wrapping.
Most types of joint used in ductile iron pipelines provide a degree of insulation
between both pipes and fittings. This insulation prevents the establishment of the
long-line corrosion currents which are a feature of welded steel pipelines.
80
Epoxy Coated Fittings DN60-2000
80
All ductile iron fittings in the sizes DN60-2000 are supplied with an epoxy coating
conforming to BS EN 14901.
Potable water fittings are coated internally and externally with blue epoxy. The blue
epoxy is approved to BS 6920.
are DN600
Coated products uti also approved
are alsoby the Secretary
approved by theofSecretary
State under Regulation
of State under 31.4.a
of the Water31
Regulation Supply
of the(Water
WaterQuality) Regulations
Supply (Water 2000.
Quality) These are 2000.
Regulations listed as PAMare
These Natural
listed
as PAM Natural Pipeline Components in the DWI list
Pipeline Components in the DWI list of approved products. of approved products.
Sewerage fittings are internally and externally coated with a red epoxy.
92 107
saint-gobain.com downpipes
A EPAMS
100 diameter,
innew range systems
of cast supplied
Kitemarked Induct Plus
iron push-fit in BS
to a blackEN 877
fittings primer
and coat.
for gravity
couplings pipeFire
Standards hydrants
Butterfly
materials valves
and DN50
ISOaccordance
in to DN2000
9001 requirements. with British, A diversified
European range
Sales Enquiries
available
Classical
sanitary
in 100 A EPAMS
for immediate
available
in a factory
Plus
in a
is asyphonic
installations.
diameter,
complete standard
Kitemarked
installation.
factory
applied
applied
semi-gloss
Induct Plus
range
to BSofEN
rainwater
semi-gloss
gutters
system,
black finished
877 forand
black
downpipes
gravity
consisting
finished
coat
of steel from
coat
An wide
Butterfly
Standards
Control installation
tolerance
valves
and
valves ISO DN50 accreditation
9001fittings
to DN2000
requirements. scheme,
to dedicated designed to
products.
A diversified rangegive
Tel +44
Sales (0) 115 9300681
Enquiries sanitary
syphonic
A installations.
complete roof outlets rainwater
syphonic and cast iron system, pipework consisting to BSof ENsteel877 peace of mind and confidence to water utilitiesto and
Timesaver
for immediate
BBA certified. installation.
Valves Plus
from An wideinstallation
Control valves tolerance accreditation
fittings to scheme,
dedicated designed
products. give
Tel +44 (0) 115 9300681
EPAMS
syphonic
Timesaver Induct
roof outlets and cast iron pipework to BS EN 877 contractors
peace of mind in the andknowledge
confidencethat to waterthe ductile
utilities ironandpipeline
products and services available from Saint-Gobain CastBBAProducts above PAM:
and services available from Saint-Gobain
ironcertified.
EPAMS PAM UK:
Valves Plus
ground system BSI Kitemark approved to
A BScomplete
416 Integral
part and Integral
syphonic
2, used Induct
Plus from Saint-Gobain
forrainwater
soil and waste system, consisting of steel
refurbishment, and
that they have
contractors
A comprehensive
An installation
in the purchased
knowledge
range of valves
accreditation
will that
scheme,
be installed
and designed
the ductile
accessories
effectively
iron pipeline
to suitable
give
and in
products and services available from Saint-Gobain Cast
syphonic Products
iron and services
above PAM:
available
ground system PAM UK:
BSI Kitemark approved to its optimum
that they have condition.
purchased will be installed effectively and in
A
BBA
complete
external
BS 416 Integral and Integral Plus
part
A complete
certified.
roof outlets
soilsyphonic
2,stacks
used range for
for
and
rainwater cast
traditional
soil
of and Other
sewerage
iron
system,
waste
pipework
appearance. consisting
products
refurbishment,
pipeline
to
products
BS EN
and
877
of steel
and services
available
for
peace
An
in
water
available
installation
its optimum
and
of mind and
A comprehensive sewerage confidence
range
from
accreditation
condition.
applications.
of valves to water
Saint-Gobain
scheme, All
and designed valves
utilitiesto
accessories
PAM:
are
and supplied
suitable
give
Other
syphonic products
roof outlets forandand cast services
iron pipework available to BStheEN from
877 forcompliance
Saint-Gobain
contractors in thewith
PAM: WRAS
knowledge requirements
that theAll where
ductile
valvesiron applicable,
andpipeline
gn BBA
CastA
Blutop
external iron
from soil
below
complete
certified.
DN80 stacks ground
to
range DN2000, of Access covers and gratings
traditional
system fully BSI appearance.
Kitemark
compliant
Other products and services
sewerage pipeline approved
with
products to
available
peace
and
that
waterof mind
available
and
manufactured
they have
in compliance
sewerage
and confidence
from
purchased
with in
applications.
to water
Saint-Gobain
accordance
WRAS will with
be installed
requirements
utilities
ISO PAM:
9001.
are
effectively
where
supplied
applicable, and in
gn above and below ground drainage system Other
BS
Cast fromproducts
437, favoured
Blutop
requirements for
Integral and Integral Plus
iron below
DN80 to DN2000, of
ground BSand
under EN
system services
Access covers and gratings
building
598.
fully BSI drainage,
Kitemark
compliant available
with the from Saint-Gobain PAM:
and
approved unstable to contractors
A
in
comprehensive
the knowledge
range
that
ofbeductile
the ductile
iron
iron
access covers
pipeline
Aground
small diameter,
conditions push
due fit
to water
its superior pipe system strength compatible
performance. its
and
that optimum
manufactured
they have condition.
purchasedin accordance
will with
installed ISO 9001.
effectively andand in
mark above approved
and below to BS EN 877.
ground drainage system with
BS 437, favoured for
requirements
Integral
plastic and
Natural pipe Ensign
Integral Plus
made
ofunderBS ENbuilding
from
598.
ductile Blutop drainage, and unstable
iron. It has the added
Gate valves, resilient and metal faced DN50 to DN300
gratings. For high performance products which meet the
AA small
Ensign
complete diameter,range
Ensign
of
push fit
Blutop
sewerage water
ground conditions due to its superior strength performance. pipeline
pipe
Blutop
systemproducts available
compatible A comprehensive
its optimum condition.
Gate valves,valves resilient
range
and
of
metal
ductile
faced
iron
to aDN50
access covers
to DN300
and
mark approved
soil and waste,torainwater,
BS EN 877. suspended, buried and advantages
from
with
A
Cast
Classical
DN80 to
plastic
Ensign
complete
Natural Classical
of
pipe
rangea
Plus
corrosion
DN2000,
made
and
of
below
Access
fully
from
Blutop
sewerage
A new generation of potable water pipeline products
iron above
covers
resistant
Cast and
compliant
ductile
ground
gratings
iron
pipeline exterior
iron.
drainage
above
with
It coating
has
products and
thethe
system
belowand ground
added
available the drainage
EN 877. A small
Non return
increasing
system
gratings.
diameter,
For demands
high
push
DN80 from to
performance
fitfrom
water
A DN300
traffic
small
pipe
products
diameter,
system
purposewhich
push
compatible
designed
meet
fit waterthepipe system c
rainage
soil andapplications,
cial
waste, rainwater,
and applications,
public buildings.
providing lifetimeburied
suspended, Technical
serviceandfor
Enquiries
innovative
advantages
from
for Cast
Cast
Classical Classical Plus
requirementsDN80
available
A
BSI Kitemarkiron
new
iron
Ductan
of of
to a
DN80
rainwater
generation
above approved
BSlining
and
EN
corrosion
DN2000, to of
and
below
Access covers and gratings
598.
fully
DN800
gutter
to BS potable
BSI
toresistant
prevent
Cast
compliant
with
Kitemark
systems
EN 877.
iron
water
theabove
exterior
a new
risk
with
to
approved
BS
pipeline
of
coating
and
the corrosion.
revolutionary
460 below
BBA
to BS
and
products
the
ground
systemdrainage A
with
range
Non
Tidal return
flap
increasing
system
comprehensive
plastic
access
forvalves
pipe
cover
low
valves
lowmade
density
demands
range
products
DN80
DN80
of
from
applications,
to toA
ductile
DN300
DN600
traffic
with
small
ductile
provide
plastic
iron
to Saint-Gobain
apipe
diameter,
access
iron.
targeted
purpose
It has
pushdesigned
made
covers
the added
asolutions
PAM
from
fit
andfor
waterUKpipeiron.
ductile
the
It has
system
UKkeyexterior
c
products
rainage Technicaland services
Enquiriesproviding available
for lifetime
Access service from
Coversfor andSaint-Gobain
innovative
requirements
Grating of Ductan
external of PAM:
BS lining
EN
protection, 598. togroundBSI
Used
prevent
fully drainage
Kitemark
for the
compliant soil riskand system
approved
of
with waste,
corrosion.
the torainwater,
BS EN 877. A small
suspended,
range
Tidal
Air diameter,
flap
valves for
buried
valves push
density
and DN80 fit water
to DN600
with pipe
applications,
advantages
plasticsystemof
pipe compatible
Saint-Gobain
corrosion
made PAM
from resistant
ductile iron. co
It has
cial and AccesspublicCovers
Brochure buildings.
Hotline and Grating
Technical Enquiries for Cast
Used Natural and flange adaptors
certified.
available
Couplings
BSI Kitemarkiron Seven
rainwater
for soil and
requirements
gutter
DN80 and
approved waste,
ofsupplied
profiles
to DN800gutter
BStorainwater,
EN BS545.bridge
and
with
systems
EN 877.
circular
a new
suspended,
drainage
to and
BS 460 rectangular
revolutionary BBA
buriedrainwater,
applications,
system A
and providing
gratings.
withcomprehensive
advantages
civil
lifetime
plastic
access
For high
of
engineering,
service
pipe
cover
performance
range
a corrosion
made of
for utility
products from ductile
resistant
and products
ductile
provide iron
innovative exterior
infrastructure which
access
iron.Ductan
targeted acoating
It has
meet
covers
sectors.
the
solutions
lining
the
and
and
addedfor the
the keyexterior
toresistant
prevent the risk coof
products
gn EEZI-FIT Technical and services
Enquiries for available
Access Covers from andSaint-Gobain
downpipes
Grating of
certified. externalsystems
Seven PAM:
protection,
Natural and flange adaptors
gutter profiles Used
inand
fully for
acompliant
black soil
circular and
primer andwaste,
with coat.
the
rectangular suspended,
AirFirevalves
increasing
gratings.
buried
hydrants
For demands
ofhigh
and fromtotraffic
performance
advantages
to athe
products
of
purpose
which
corrosion
ofdesigned
meet thethe
Tel:+44(0)800
Access Covers
Brochure Hotline 028 and 2134
GratingTel: +44 (0)1664 814014
bridge
A
Used new Couplings
Classical
Accommodating
downpipes
fordrainage
generation
soil
Plus
requirements and
systems
applications,
is aawaste,of
standardpotable
ofsupplied
wide
rainwater,
EN range
BS range
providing
commercial
water
bridge
545.inof a of pipeline
suspended,
drainage
external
black gutters
lifetime
andand service
public
products
buried
applications,
diameters
primer downpipes
coat.
and
and
for providing
buildings. innovative
advantages
range
lifetime
for low
Ductan
civil engineering,
service
density
lining
a corrosion
for utility prevent
resistant
applications,
and
innovative exterior
infrastructure
to Saint-Gobain
risk
Ductan corrosion.
coatingsectors.
lining
PAM UK
and to prevent the risk of
gn
gnEEZI-FIT
nge of Fax:+44(0)115
Tel:cast+44
Tel:+44(0)800iron (0)1664 932
0289513
push-fit 814014
fittings and
2134 Faxcouplings
Tel: +44 (0)1664
+44 (0) 1664814014
commercial
available
bridge
A
812060
pipe new Large diameter water pipes
Blutop
available
Classical
materials
DN80
drainage andto
in a factory
generation
Plus
public
DN800
applications,
of
isinaaaccordance
standardapplied
potable PAM Estate Couplings and flange adapt
buildings.
with a new
providing
commercial
semi-gloss
water
range
with of
revolutionary
pipeline
gutters
British,
lifetime
and
black service
public
finished
products
and
European
systemfor
buildings.
downpipes coat
increasing
Fire
innovative hydrants
Butterfly demands
valves
Ductan from
DN50
lining to
totraffic
DN2000
prevent athepurpose
risk ofdesigned
corrosion.
ameter, brochures.uk.pam@saint-gobain.com
Fax
Tel: +44
Kitemarked
Fax:+44(0)115
+44 (0)
(0)16641664
to BS
932 812060
9513 EN 877 and
814014 for gravity
Accommodating
Email:technical.covers.uk.pam@
of
commercial
available Large
forexternal
immediate
diameter
DN80 Ensign
water
protection, EEZI-FIT
wide
pipes
andinstallation.
public
to DN800 Couplings
range
fully
buildings.
with and flange
of
PAM Estate
complianta new adaptors
external
Couplings
diameters
with the
and flange adapt
revolutionary
and
system
access
range
Butterfly
Control
cover
for
Other
low products
density provide
applications,
valves DN50 to DN2000
valves
products and
targeted
services
solutions
Saint-Gobain for
PAM
available
the
UK key
offrom Saint-
gn nge of
ninstallations.
above
ameter, Fax
cast iron push-fit
and below ground drainage
brochures.uk.pam@saint-gobain.com
Email:technical.covers.uk.pam@
+44
Kitemarked (0) 1664
to BS
fittings
812060
EN 877
Fax
for
couplings
+44 (0) 1664 812060
system
saint-gobain.com
gravity
Standards
pipe
ofA small
for BlutopEEZI-FIT Ensign EEZI-FIT
available
Ensign
Large
materials
requirements
external
DN2000,
in
anda factory
diameter
diameter,
immediate
ofISO
in
protection,
fully
9001
push
installation.
applied
water
accordance
BS EN
compliant
requirements.
545.
fit water
fully
semi-gloss
pipeline
with
compliant
A new
with
pipe
products
British,
Couplings and flange adaptors
the
system
range with
black
A diversified
of the
requirements
finished
available
Europeancompatible
cast iron
range
of
coat to civil
DN900
push-fit
BS EN
access
fittings
545.
Designed
engineering,
and
Control
Accommodating
cover products
housing couplings
valves
to meet
utility
acommercial
widethe
theand
provide
range
requirements
infrastructure
Accommodating
targeted
of external
andsectors.
solutionsexpectations
a wide
diameters
for the range
and
key the
of external diam
mark Technical
approved
saint-gobain.com
ninstallations.
above
Enquiries
to BS EN
and below ground drainage system 877. Email:technical.covers.uk.pam@
from
Standards
A with
new
small
wide and
Ensign
EPAMS
Large
plastic
requirements range
tolerance
EEZI-FIT
diameter
diameter,pipe ISO
ofofcast
9001
made
BS pushEN
fittings
water
iron from
545.
fitpush-fit
water
to dedicated
requirements.
pipeline
Induct Plus
ductile
in 100
products
fittings
pipe iron.A
system
diameter,
products.
diversified
It has
and
available rangeDN900 to civil
the addedto BS EN 877 for gravity
couplings
compatible
Kitemarked
Other
Designed
engineering, and
products
to meet
utility and and sectors.
requirements
pipe services
materials
infrastructure
Accommodating and in available
expectations
accordance
sectors.
a wide range of from
the
with
of Saint-
British,
external Euro
diam
Email:technical.covers.uk.pam@
saver
mark
Tel:+44(0)115
Technical
approved
soil and waste, to
930 0700
Enquiries
BS EN
rainwater, 877.suspended,
saint-gobain.com from
buried and inwith Large
EPAMS
advantages
100 diameter water pipes
DN2000,
wide
diameter,
plastic of
fully compliant
tolerance
pipe a corrosion
Kitemarked
made
fittingsPAM Estate
Induct
from
A
to
Plus
resistant
to
new
withdedicated
BS
sanitary
ductile
the
EN
range
exterior
877
of cast
requirements
products.
for
installations.
iron. It hascoating
gravity
ironofpush-fit
theof and
added
BS EN 545.
the
pipe housing
fittings materials
and couplings
Accommodating andin aaccordance
wide rangepipe
commercial with
sectors.
StandardsBritish,
of external
materials and European
diameters
in 9001and
ISOaccordance requirements.
with A divers
British, Euro
saver
rainage
soil
saint-gobain.com
products
Tel:+44(0)115
Sales
Sales
and
and
applications,
Enquiries
Enquiries
waste,
930 services
rainwater,
0700
providing
Sales Enquiries
available
lifetime
suspended, Tel +44
from
serviceand
buried(0) to for
115
A A new
sanitary Valves
complete
Saint-Gobain
innovative
advantages
Large
9300681
in
rangesyphonic
100 diameter
syphonic
of cast
installations.
diameter, Ductan
roofof outlets
PAM:
Large diameter water pipes
awater
iron
lining
corrosion
Kitemarked
push-fit
rainwater
PAM Ensign
tocast
pipeline
and
in
Estate
prevent
resistant
to
100 fittings
system,
products
BS EN
sanitary
iron
diameter,
the
exterior
and
risk
877availableBlu
consisting
installations.
pipework of
couplings
Kitemarked
tocorrosion.
forcoating
gravityBSDN900
EN
steelto BS ENpipe
and877 the
to
An877installation
Standards
Designed
for gravity
materials and in ISO
totolerance
9001 requirements.
accreditation
accordance
meet thefittings requirements
scheme,
with
from
StandardsBritish,
wide Atolerance
and and
diversified
designed ISO to
European
expectations 9001 range
give
fittings
of the
to dedicated
requirements. prod
A divers
above
products
cial
rainage
art
and
Tel
ground
public
+44
Tel:+44(0)115
Sales
2, Sales
used applications,
system
and
buildings.
(0)
Enquiries
for soil 115
930
BSI Kitemark
services
9300681
0630
providing
and waste lifetime
approved
Sales
available
refurbishment,
Enquiries
service from
and for A
A
Saint-Gobain Valves
complete
Your
comprehensive
DN2000,
sanitary
innovative
BBA certified. fully
syphonic
local
installations.
Ductan PAM:
stockist
Timesaver
range
compliant lining
rainwater
is:
of Ensign
withvalves
to prevent the
system,
and accessories
requirements
the available Blu
consisting
of
risk oftocorrosion.
of
suitable
BS
steel
EN 545.
from
peace
Standards
An
housing
Designed
wide
Cast
of mind
installation
and
and
iron
and
ISO
above
commercial
totolerance
meet the
confidence
9001
accreditation
and below
sectors.
requirements
to
requirements.dedicated
to
scheme,
from water
ground
A products.
utilities
diversified
designed
wide tolerance
drainage
andductile
expectations
and
to rangeto dedicated prod
give
fittings
system of the A sm
above
cial
Enquiries
ground system
sales.uk.pam@saint-gobain.com
and public buildings.
BSI Kitemark Telapproved
+44 (0) 115 9300681
to Large
for
syphonic diameter
Timesaver
roof
Couplings and flange
waterYourand local
water
outlets
adaptors
stockist
Timesaver
sewerage
pipeline
and
applications. Valves
products
is:cast iron pipework All valves are
BSDN900
EN 877to
supplied
contractors
from
peace wide
BSI ofKitemark
mind in the knowledge
andapproved fittings
confidence tothat
to BS
the
dedicated
to water
EN 877.
iron
products.
utilities andpipeline
gn
soil Tel
stacks +44 for
Tel:+44(0)115 (0) 115
traditional
930 9300681
0630
art 2, used for soil and waste refurbishment, and
gn EEZI-FIT
appearance. A comprehensive
DN2000,
BBA certified.
Blutop
Timesaver
fully range
compliant TechnicalCastValves
ofwithvalves the
Enquiriesand accessories
requirements
Valves
iron above of suitable
BS EN
for ground system BSI Kitemark 545. housing Cast and
that theyapproved
contractors
iron
have above
commercial
in the to
purchased and
knowledge
below
sectors.
will that ground
be installed drainage
the ductile effectively system
iron pipeline and in
with
A sm
soil
below sales.uk.pam@saint-gobain.com
stacks groundfor traditional
system BSI appearance.
Kitemark approved to
in
for
Cast Integral and
Couplings
compliance
water
Accommodating Integral
and flangePlus
with
and sewerage
iron above adaptors
ground
a
WRAS
Access
wide
Technical
requirements
applications.
Valves
system
range BS
Covers of BSI
416
Enquiries
Kitemark
andpart
external
where
AllGrating
valves
2,
for used
applicable,
are
approved
diameters for supplied
soil
andto
and waste BSI Kitemark
Used
refurbishment,
its optimum forcondition.
soiland approved
and waste,to Arainwater,
comprehensive
BS EN 877. suspended, rangeburied of valves andand accessor adva
with
gn EEZI-FIT
gn
ange
n above
avoured
below
Head Office
of
Lows
Head
cast
and iron push-fit
below ground
forLane,Stanton-by-Dale,
ground under
Office
building
system
fittings
BSI drainage
drainage,
Kitemark
and couplings
system
and
Ilkeston, unstable
approved to
and
in
BS
A
Cast small
pipe Blutop
Integral and Integral Plus
manufactured
compliance
416
AYour ironpart
local
diameter,
materials
complete
Accommodating aboverange
with
2, used
stockist in
WRAS
for
push
inground
accordance
aaccordance
Access
of
wide
soil
is:sewerage
fit
system
rangewater
Cast
requirements
and waste
external
with
BS
Covers
iron
pipe
BSI
416
pipeline
of
above
withrefurbishment,
ISO
soil
system
Kitemark
British,
andpart
external
where9001.
2,stacks
ground
European
used
Grating
products
diameters
applicable,
for
compatible
approved
for
system
and
traditional
soil
available
andto
and waste
BSI Kitemark
Athat
appearance. Used
refurbishment,
its optimum
approved
they have purchased
comprehensive
bridgefor drainage
soiland
condition.
to
range of will
andapplications,
waste,A
valves
for
be and
installed
comprehensive
rainwater, and
effectively
accessories
providing
water lifetime
sewerage
suspended, rangesuitable
of
and in
service
buried valves forand All
applications.
and valves
innov
accessor
adva
markameter, Kitemarked
approved to BS to
EN BS EN
877. 877 for gravity external
and soil
manufactured stacks for
in traditional
accordance appearance.
with ISO 9001. for
A water
comprehensive and
commercial sewerage
and
range applications.
public
of buildings.
valves
in and
compliance All valves
accessorieswith areWRAS supplied
suitable requirements
for All where
ange
n
mark
onditions
above
avoured
ameter,
of
Lows cast
installations.
due
Derbyshire,
and
Tel:+44(0)115
below
Kitemarked
approved
to its
iron push-fit
DE7
930
superior
to
torainwater,
BS EN
4QUfittings
ground
forLane,Stanton-by-Dale,
under building
5000
BS EN
877.
strength
drainage
drainage, and performance.
couplings
system
and
Ilkeston,
877 for gravity
unstable with
BS
A 416
Your
small
from
Standards
pipeGate
external
Cast
advantages
plastic
part
local
DN80
materials
iron soil
and
valves,
below
pipe
2, used
stockist
diameter,
to
stacks
of a
ISO made
DN2000,
resilient
in
ground
for
Tel:
pushis:
9001
accordance
for
corrosion
soil
+44
fit
andAccess covers and gratings
from
fully and
waterductile
(0)1664
requirements.
A complete range of sewerage pipeline products available
traditional
system
metal
with
resistant
waste
external
compliant
Cast pipe
BSI
iron iron.
faced 814014
soil
system
British,
appearance.
Kitemark
exterior
A Itstacks
with
below has
refurbishment,
diversified
DN50
European
Cou
the
to for
compatible
the
ground
approved
coating
added
DN300 and
traditional
system
range
and to
BSIappearance.
Kitemark
in
bridge
forcompliance
the BSI Kitemark water
drainage
approved
commercial with
andunstable
sewerage
to
and
applications,
WRAS
public requirements
applications.
and
buildings.
in
providing
compliance All where
manufactured
lifetime
for water and sewerage applications.
withapplicable,
valves are
in
WRAS
service
supplied
accordance with ISO
requirements
valves
innov
900
where
soil and waste, suspended, buried and Fax +44 (0) 1664 812060
onditions
rainage
due to
Derbyshire,
ical Classical Plus
Fax:+44(0)115
installations.applications,
Tel:+44(0)115
its
DE7
932
930
superior
4QU
9513
providing
5000
strength performance.
lifetimeburiedserviceand for
with
BS
from
Standards
Gate
Non
437,
innovative
Cast
advantages
plastic
requirements
from wide
DN80
iron
and
valves,
return
favoured
pipe
to
Ductan
belowof of
of
tolerance
valves made
BS
DN2000,
ISO
resilient
for
a ground
Tel:EN
9001 DN80
under
lining
corrosion
Access
from
598.
fittings
+44fully
and tocovers
BS
(0)1664
Ensign
toresistant
system
and gratings
ductile
to DN300
building
prevent
Email:technical.covers.uk.pam@
ground
437,
dedicated
EEZI-FIT
compliant
Cast
requirements.
metal
BSI
iron favoured
iron.
faced 814014
drainage,
the
437,Kitemark
exterior
Awith
below
risk
conditions Cou
of
for
Itproducts.
has the
and
the
ground
diversified
DN50 to under
added
DN300
unstable
corrosion.
due
approved
coating to
and
building
system
range
its
to superior
the
drainage,
and
in
and
approved
manufactured
Astrength
comprehensive
compliance
to
withrange
performance.
in
WRASaccordance
ofrequirements
ductile with
and manufactured ISO
iron access 9001.
wherecovers applicable,and
in accordance with ISO 900
soil and waste, rainwater, suspended, Fax +44 (0)
BS 1664 812060
favoured for under building drainage, and unstable
saver
ical Classical Plus
cial
rainage and
rainwater
public buildings.
Fax:+44(0)115
applications,
and gutter 932 9513
providing
systems lifetime
to BS 460service
BBA for BS
requirements
from
groundNon
Tidal
wide
Natural
Valves
return
437, favoured
innovative
tolerance
flap valves
conditions
Ductan
valvesBS
for
EN
DN80
due DN80 598.
fittings
toto
saint-gobain.com
under
lining
to
itsto to
building
prevent
Email:technical.covers.uk.pam@
ground
dedicated
Ensign EEZI-FIT
DN300 strength performance.
DN600
superior drainage,
the
products.
risk ofand
conditions corrosion.
due
gratings.
and
to its superiorAstrength
unstable comprehensive
GateA new Forrange
manufactured
valves,
high rangeperformance
of
resilient
performance.
incast
accordance
ofiron
and
ductile
Gate
products
with
push-fit
metal iron
faced
valves,
ISO which
access
fittings
DN50
resilient
9001. meet
covers
and
to DN300
and
the
and
couplings
metal faced Accom
DN50
pipe
saver
ncial above
Sevenand
rainwater
ground
public
gutter system
buildings.
andprofiles
gutter and
BSI
systems
Kitemark
circular
to BS andapproved
460 rectangular
BBA
to groundAir Couplings
Natural and flange
Tidal
Valves
flap
conditions
valves Classical
valves
A new generation saint-gobain.com Classical Plus
adaptors
DN80
due to to
its DN600
superior
of potable water pipeline products strength performance. increasing
gratings.
Gate
in
A new100 For
valves,
demands
high
diameter,
range
from
performance
of cast
resilient
Kitemarked
andiron
Gate
traffic Non
to
products
to
push-fit
metal faced
valves,
return
aBSpurpose
EN which
fittings
resilient
valves
877
DN50 and
meet
for DN80
designed
to DN300
andto
gravity
couplings
metal faced DN50
the DN300
Accom
Stand
gn EEZI-FIT
nartes 2, used
systems
above
Seven ground
gutter
for soil
supplied and
system
profiles
waste
inand a
BSIblack refurbishment,
primer
Kitemark
circular and coat.
approved and
rectangularto
A Classical
Couplings and
comprehensive
available
Accommodating
A Air
Fire
new valves Classical
flange
DN80 to
hydrants
generation
Plus
a
range
Classical
adaptors
Sales
DN800
of
wide
of
Classical Plus
potable
range
valves
Enquiries
withCast
water
of
and
a external
new
iron
accessories
revolutionary
rainwater
pipeline products
diameters
suitable
and system
gutter systems
and
Non
range return
for
sanitary
increasing
toinBS100
low
460
valves
density
installations.
demands
diameter,
BBA
DN80
from
to
applications, DN300
traffic
Non
to
Tidal Saint-Gobain
areturn
purpose
flap
Kitemarked to BS EN 877 for gravity valves
valves PAM
DN80
designed
DN80 UK
to to DN300
DN600
pipe
from
Stand
gn EEZI-FIT
soil2,stacks
Plus
art
angees isused
of
systems acast for
standard
for
iron traditional
soil
supplied range
and
push-fit a of
inwaste
appearance.
gutters
fittings
black and
primer and
refurbishment, downpipes
couplings
coat. and
for
A
Cast Classical Classical Plus
water
ofcomprehensive
external
iron
available
and sewerage
protection,
rainwater
DN80 into
range
Tel
Sales
and
DN800 +44 applications.
of valves
fully
gutter (0) 115
compliant
Enquiries
with systems
certified.
and9300681
a external
new
All valves
accessories
with
Seven BSthe
to European
revolutionary
are
460and
gutter BBA
supplied
suitable
profiles
gutter and
system
Non
Tidal
access
rangesanitary
circular
return
and
flap
cover
for low valves
valves
products
installations.
rectangular
DN80
DN80
density applications, to
provide to DN300
DN600
targeted
Tidal
Air valves
solutions
Saint-Gobain
flap valves DN80 for
PAM UK the key
to DN600
in
soil
nameter,
ange
a
below
Plus factory
stacks
of groundforapplied
Kitemarked
is acaststandard
iron traditional
system semi-gloss
to BS
range
push-fit BSI black
appearance.
of Kitemark
EN 877 and
gutters
fittings
finished
approved
forand
gravity
downpipes
couplings
coat
to
pipe Fire
certified.
of
Cast
materials
Butterfly
Accommodating
in
for
requirements
external
Standards iron
hydrants
compliance
water and
Seven
valveswith
protection,
rainwater
and
a
sewerage
ofgutter
accordance
DN50
wide
BSTel WRAS
EN+44
and
ISOaccordance
9001
profiles
fully Timesaver
gutter (0)
with
Cast
torequirements
range DN2000
applications.
545. of
and
compliant
systems
certified.
requirements.
British,
iron
circular
115 9300681
downpipes
rainwater
All
with
to
Seven
A
diameters
where
valves
Val
and
systems
BS the460
gutter
diversified
applicable,
are
rectangular
and
supplied
supplied
BBA range inand
profiles
systems
a blackcivil
circular
toengineering,
Tidal
access
Air
BS
primer
460
flap
cover
valves
andcoat.
BBA utility and infrastructure
valves
products
rectangular
DN80 to
provide DN600
targeted
AirFirevalves
hydrants
sectors.
solutions for the key
from
ediate
navoured
below
ameter,
installation.
installations.
in a factory for under
ground applied
Kitemarked building
system semi-gloss
to BSIEN
BS drainage,
877black
Kitemark and unstable
finished
approved
for gravity coat
to
pipe
and
downpipes
in materials
manufactured
Butterfly
compliance
Control
requirements
certified. Seven
valves
valves
systemsin
with
of gutter
insupplied
DN50
BS WRAS EN profilesTimesaver
accordance
to DN2000with
545.requirements
inand
Classical
downpipes
British,
with
a black ISO
Plus
circular
European
9001.
where
primer is
Val
and
systems
applicable,
coat.
a standard
rectangular
supplied rangein a of civil
gutters
black Air
Fireengineering,
primer and
valves
Cast iron
hydrants downpipes
coat. above utility
groundand system
infrastructureBSI Kitemark sectors.approved to
conditions
ediate
avoured www.saint-gobain-pam.co.uk
due
installation.
installations.
products for to its superior strength
under building drainage, and unstable
and services available from Saint-Gobain
performance.
from
Standards
and
Classical
downpipes
wide
manufactured
The
Control
Gate Plus
tolerance
Large diameter water pipes
andisISO
information
valves
valves,systems a
PAM:
resilient
9001
in
standard
given
fittings
supplied PAM
accordance
in
and Estate
to
requirements.
range
this
dedicated
available
in
metal a
Classical
with
of
literature
black gutters
faced inA to
ISO
is,
Plus a
primer
products.
diversified
DN50
9001.
and
the
factory
is a
best
coat.
to
range
downpipes
of our
applied
DN300
standard
knowledge,
semi-gloss
range of
correct
gutters black at
BShydrants
Cast 416
and
the time
finished
ironpart
downpipes
above
of
coat
2, usedgoing
ground
to
for soil
print. Fire
system
hydrants
Butterfly
However,
and wasteBSI
valves
Saint-GobainDN50PAM
refurbishment,
Kitemark approved
to DN2000
UKandis
to
A com
MS
saver
conditionswww.saint-gobain-pam.co.uk
due to its superior strength performance. available
Classical Induct
fromconstantly
wide
The Plus
Plus
information
looking
intolerance
Large diameter water pipes
a factory
is a standard
given
fittings
appliedPAM
at ways of
in Estate
to
for
range
this
improving
dedicated
semi-gloss
immediate
of
literature gutters
their
is, to
products and services and therefore
products.
black and
the finished
installation.
bestdownpipes
of ourcoat
knowledge,
Fire
Butterfly
external
correct at the
valves
reserve
soil
time
theDN50right to
stacks
of going
tochange,
forto
DN2000
print.
without prior notice,
Butterfly
Control
traditional
However, valves
valves
appearance.
Saint-GobainDN50PAM
any of the
tothe
DN2000
UK is for
A comw
Valves available in a factory applied semi-gloss black finished coat
data contained in this publication. Any orders placed will be subject to our Standard
DesignedBS 416 to Conditions
meet
part 2, the
used of Sale,
requirements
for available
soil and on
and
waste request.
expectations
refurbishment, of and
products and services available from Large
Saint-Gobain
Gate diameter
valves,looking waterat
PAM:
resilient pipeline
andto metal products facedtheir available
DN50 DN900
to DN300 to
sical
MS
nete Classical Plus
saver syphonic Saint-Gobain
rainwater
system system, PAM UK
consisting of steel
for
An
Non
available
DN2000,Induct
return
immediate
Plus
constantly
2011
installation in a
valves
installation.
factory
Saint-Gobain
fully compliant
accreditation
DN80
ways
applied
PAM UK
of
for
withscheme,
DN300
improving
semi-gloss
the immediate
requirements
Anydesigned black products
finished
installation.
ofgive
to
and services and
BS EN coat545.
Butterfly
therefore
Control
housing external
Castand iron
valves
reserve
valves
soil
below
theDN50
commercial
right to
stacks
theground
tochange,
for
DN2000
system
without prior notice, any of the
Control
traditional
sectors. valves
BSIappearance.
Kitemark approved of the to
in
for co
w
above ground BSI Kitemark approved to
Valves
data contained in this publication. orders placed will be subject
to to our Standard
Designed toConditions
meet of Sale,
requirementsavailable on
and request.
expectations
Large diameter water pipeline
sical Classical Plus
n artroof outlets
rainwater
2, used Head and
Saint-Gobain
and
for Office:
cast
gutter
soil and iron
waste pipework
PAM
systems UK
to BS to
460
refurbishment, BSBBA
ENsteel
877
and
for
A
peace
Non
Tidal
of
return
immediateflap valves
comprehensivemind EPAMS
valves
and
DN80
installation.
range DN80
confidence ofto to
valves to
products
DN300
DN600 Induct Plus
and accessories
water
available
utilities and
DN900
suitable ControlBS 437, valves
favoured for under building drainage, and unstable and
in com
gn
ete syphonic rainwater system, consisting of
Blutop
2011 Saint-Gobain PAM UK
n above
ified.
nart.soil
Seven
roof
www.saint-gobain-pam.co.uk
2,stacks
ground system BSI Kitemark approved to
outlets
rainwater
Lows
Head
gutterfor
and
Lane,
Office:
profiles
traditional
and cast
andiron
gutter
Stanton-by-Dale,
and
systems circular
appearance.
pipework
to BSandto
460rectangular
BSBBA
ENand
877
An
The
A
DN2000,
constantly
contractors
peace
EPAMS
installation
information
comprehensive
for Tidal
water
Air
of mind
fully compliant
flap
valves and
looking
accreditation
given
EPAMS
invalves
sewerage
the
and atrangeDN80
ways
knowledge
confidence
Induct Plus
in thiswith
of
of tovalves
the is,
scheme,
literature
DN600
applications.
Athat
improving to
requirements
and
complete
todesigned
Induct Plus
their
the
water
the best ofto
All valves
accessories
syphonic
products
ductile
utilities iron
of
our
are
and
BS
give EN 545. correct
knowledge,
supplied
suitable
rainwater
services and
pipeline system,
therefore
atCast
housing the and
ground
consisting
reserve
BS
ironcommercial
time
437, the
ofbelow
going to
conditions
ofright
favoured
ground
steeltofor
sectors.
print.
due
change,
underto
system BSI
However,
An its
without
building
KitemarkPAM
Saint-Gobain
superior strength
priordrainage,
installation notice,
approved
anyand
accreditation of
UK is to
performance.
the
unstable
scheme, designed and m
Ga
used for soil waste refurbishment, ofand
gn
n
pes
n above
ified.
.soil
Seven
below
www.saint-gobain-pam.co.uk
systems
stacksand Ilkeston,
Lows
gutter
ground below
supplied
for Lane,
profiles Derbyshire,
ground
traditional
system Stanton-by-Dale,
inandBSI drainage
a black
circular
appearance.
Kitemark
DE7
primerand 4QU
system
coat.
rectangular
approved to
data
in
A
for
that
Your
Air
constantly
contractors
Blutop
EPAMS
The information
contained
compliance
complete
small
water
they
Fire valves
Quality and
have
hydrants
local in
ingiven
syphonic
diameter,
this
with
sewerage push
purchased
Assurance
stockist
looking the at waysis:UK
knowledge ofInduct Plus
in this literature
publication.
WRASrainwater
fit water
will
Any
requirements
syphonic
applications.be
Athat
improving
is, to the
orders
system,
pipe
installed
complete their
the ductile
best will
placed
where
consisting
system
roof
All valves
syphonic
products
our
are
effectively
be
compatible
outlets of
knowledge,
subject
applicable,
and steel
cast
supplied
iron rainwater
and and in
to
iron
correct
our
pipework
An
pipeline system, consisting
services and therefore
at the
Standard time of going
Conditions
to
installation
ground
Environmental
reserve BS
the EN
of
877
to print.
Sale,
accreditation
conditions
of steel
right to
available
due
However,
to
Standard
change,
on
scheme,
its
peace
Saint-Gobain PAM UK is
request.
superior
without of designed
mind
prior strength
and
notice, to
any giveperformance.
confidence
of
An installation accreditation scheme, designed the to water utilitie
nral and Integral Plus
mark
pes
n
Plus
above
avoured
Saint-Gobain
approved
is aand
systems
below Head
standard
forIlkeston,
ground below to BS
supplied
under
Office:system
PAM
EN
range
Derbyshire,
ground
in BSI
building ofUK
a877. gutters
drainage
black DE7
primer
drainage,
Kitemark
and 4QU
system downpipes
coat.
and
approvedunstable
to
and
data
in
A
its
that
2011
syphonic
with
complete
Saint-Gobain
contained
plastic
compliance
optimum
small
Your they
Fire
roof
manufactured
have
hydrants
outlets
in
pipe
syphonic
diameter,
this
with
condition.
PAM
made in
push
purchased
and
publication.
WRAS from
is:rainwater
fit Classical Classical Plus
cast
accordancewater
will BBA iron
Any
ductile
requirements
besystem,
syphonic with
pipe pipework
orders
certified.
installediron.ISO
placed9001.
consisting
system
roof to
will
Iteffectively
where has BSbeof
the
compatible
outlets EN
and 877
subject
added
applicable,steel
andcast
to our Standard
peace
in iron pipework
An ofConditions
mind
to
installation BS EN and of confidence
877
Sale, available
accreditation toonwater
scheme,
request.
contractors
peace utilities
of designed
mind in the and
to
andknowledgegive
confidence that
Ga
the ductile
to water
No
utilitie
Quality
local
Butterfly Assurance
stockist
valves DN50 to DN2000 Environmental Standard
ral and Integral Plus
e
mark in
Plus
soil
conditions
ete
avoured
a Saint-Gobain
factory
approved
is afor
and
range
Lows
Tel:
standard
waste,
due
of
+44
applied
sewerage
under
Lane,
BS
its
PAM
(0)115
semi-gloss
EN
range
torainwater,
superior
buildingpipeline
Stanton-by-Dale,
UK
930
877. 5000
ofsuspended,
gutters black
strength
products
drainage, and finished
and downpipes
buried coat
and
performance.
available
unstable
BBA
2011
with
its
certified.
advantages
syphonic
and Saint-Gobain
Quality roof
manufactured
plastic
optimum
Gate valves,
Management
of
pipe
condition.
PAM
a corrosion
outlets made
resilient
in andUK
Classical Classical Plus
accordance
from
and
Systems
resistant
cast BBA iron
ductile
metal
with BS
certified.
faced
EN
exterior
pipework
iron. ISO
ISOIt9001.
DN50 has 9001:2000
coating
to the
BS EN
to DN300
and
added877the Environmental
contractors
peaceCast of mindironin theandknowledge
rainwater Management
confidence that
to water
that
and contractors
gutter Systems
the
they ductile
systems BS
utilities
havein the
EN
toironand
purchased
BS ISO 14001:2004
pipeline
460
knowledge will that
BBA be installed
the ductile
No
Tid
effe
e ediate
80 in
rainage a
to
Head
factory
soilrange
conditions
ete andDN2000,Fax:
Tel:Office:
installation.
waste,
due
of
+44
+44
applied
applications,fully
to
(0)115
(0)115
semi-gloss
providing
compliant
rainwater,
sewerage its superior
pipeline
932 5000
930 9513
black
lifetime
with
suspended,
strength the finished
4QUburied
products
service coat
and
performance.
available
for BBA Butterfly
(Registered
Control
Access
innovative
Qualitycovers
certified. valves
and
DuctanIntegral
valves
Management and Integral Plus
firm:
gratings
DN50
lining12908) to
to DN2000
prevent
Systems
advantages of a corrosion resistant exterior coating and the BSthe EN risk
ISO of corrosion.
9001:2000 that they have
Environmental
certified.
contractors purchased
in Seven
the Management
gutter
knowledge will be
andprofiles
that
its installed
Systems
and
the
optimum ductileeffectively
BS
circular EN
toiron
condition. and ISO and in
14001:2004
rectangular
pipeline Tid
Ai
Ilkeston,
Lows
sical Classical Plus Lane, Derbyshire,
Stanton-by-Dale, DE7 Gate Integral and Integral
valves, Plus
resilient andto metal faced DN50 to DN300 Cast iron rainwater that
gutter they have
systems purchased
BS 460 will be installed effe
BBA
andIntegral and Integral Plus
Fax: +44 Non return valves DN80 DN300
fully (0)115 932 with
9513the service for
ediate
cial and installation.
public buildings. Quality (Registered
Control valves
Assurance firm: 12908) Environmental Standard
ments
MS80 to of
rainage BS
DN2000, EN 598.
applications, providing
compliant lifetime
Access
innovative
Induct covers
Plus
Integral
Ductan
gratings lining to prevent
A complete the risk range of corrosion.
of sewerage pipelineits
that optimum
downpipes
they
products
certified.have condition.
systems
purchased
available
Seven gutter supplied
will be
profiles in a
installed
and black primer
effectively
circular
its optimum condition. and coat.
and in
rectangular Ai
Fir
Ilkeston, Derbyshire, DE7 4QU
Couplings and flangePlus
and Integral
A comprehensive range ofto ductile iron access covers and
sical
ments Classical Plus
cial and of BS
Tel:
public
+44EN
and598.
buildings.
(0)115
gutter930 5000to BS 460 BBA A
Quality Non return
Tidal
complete flap range
Assurancevalves
valves adaptors
ofDN80 DN80
sewerage to DN300
DN600
from Access covers and gratings
pipeline DN80products to DN2000, available
fully compliant Classical
Environmental
its with
optimum Plus
the available
downpipes condition. isStandard
systems a standard
supplied range
in a of blackgutters
primer andcoat. downpipes
ral
n rainwater
MS
gn EEZI-FIT
ete syphonic rainwater
systems
system, consisting of steel
Quality
gratings.
Afrom Induct Plus
Management
comprehensive
Couplings
DN80
For high Systems
performance
range
and flange adaptors
to DN2000, ofto
fully
A
ductile complete
BS EN
products
Access covers andAccess
compliant gratings
ISO
irondesigned range
9001:2000
which
access
with the
of
meet
covers sewerage
the
and pipeline products
Environmental
available Management Systems BS
in a factory applied semi-gloss black finished coat EN ISO 14001:2004 Fir
Bu
nc. Seven
ral
gn
Fax:
Tel:
rainwater
EEZI-FIT
+44
gutter
+44 and (0)115
profiles
(0)115
gutter 932
and
930systems 9513to BS
circular
5000 and 460rectangular
BBA
An
A installation
Tidal
Air
complete
(Registered
Accommodating
increasing
Quality
gratings.
flapfirm:
valves valves
range
demands
Management
For high
accreditation
of
12908)DN80sewerage
aperformance
widefrom range
Systems traffic
scheme,
DN600
requirements
from pipeline
of
BS covers and gratings
DN80
external
to EN
products a purpose
ISO
of
products
9001:2000
which
BStoEN
todiameters
DN2000,
designed
meet
give
598.
available
fully
and
the
compliant with Classical
Environmental
for
the Plus is a standard range of gutters and downpipes
immediate Management
installation. A comprehensive
Systems BS EN ISOrange of
14001:2004 ductile iron access
Buc
ange
pes roof
eneration
ete
.ified. ofoutlets
syphonic
systems
Seven Fax: cast
+44
gutter
andpush-fit
ofsupplied
potable
iron cast
rainwater water
(0)115in932
profiles
iron
and
pipework
pipeline
system,
fittings
a black
9513primer
circular and
and
to BSof
products
consisting ENsteel
couplings
coat. 877
rectangular
requirements
peace
from
An
pipe
of mind
DN80
installation
Air valves
materials to of and BS confidence
DN2000, EN 598.
accreditation
in aaccordance Access covers and gratings
to water
fully requirements
compliant
scheme,
with
utilities
with
designed
British, oftheBSto
European
and
EN give
598. available in a factory applied semi-gloss black finished coat Co
c DN80
roof
ameter,
Plus
eneration to
outletsDN800
Kitemarked
is cast
a standard and
ofsupplied
potable with
cast to
range a
iron
BS
in a of
water new
EN revolutionary
pipework
877
gutters
pipeline forandto BS
gravity
products system
EN 877
downpipes
Fire
(Registered
range
Accommodating
increasing
contractors
requirements
peace
hydrants
for
of
low
mind
firm:
demands
inof Natural
density
the
and
12908)
wide
BSknowledge
applications,
from
EN 598.
confidence
range
traffic ofto
that
to water
Saint-Gobain
external
a purpose
the ductile
diameters
utilities iron
PAM
designed
and
UK
and
pipeline
A comprehensive range of ductile
for immediate installation. gratings.
A iron For
comprehensive accesshighcovers
performance
range and
of ductileproducts
iron which
access
Coc
ange
pes
nal
of
systems
inprotection,
ified.
installations.
eameter,
DN80
Plusa factory
is to DN800
iron
aKitemarked
standard
push-fit
fullywith
applied compliant
fittings
black
semi-gloss
to
range aBSnew
ofEN with
and
primer
forthe
black
revolutionary
877
gutters
couplings
coat.
finished
gravity
and coat
system
downpipes
access
pipe
range
that Natural
Standards
Fire
contractors
cover
materials
for
they
and
hydrants
Butterfly low
have valves
in
ISO
products
in
Natural
density
purchased
the
9001
accordance
DN50 provide
EPAMS
requirements.
towill
applications,
knowledge A
targeted
with
DN2000be
new
that
British, A
Saint-Gobain
installed
generation
the ductile Ind
diversified
solutions
European
effectively
of
iron
for range
PAM the
potable
UKkey
and
pipeline in
water
gratings.
A comprehensive
pipeline
For high range
products
performanceof ductile products
gratings.iron For
increasing which
accesshighcovers
demands meet from
performance the
and trafficproducts
to a purpose
whichd
gral and Integral Plus
ments
eediate
nal ofinstallation.
inprotection,
installations.
a factoryBS ENapplied545. compliant
fully semi-gloss with
blackthefinished coat
from
civil
access
that
A Natural
wide
engineering,
Standards cover
Butterfly
Control
itsnew
optimum
they
tolerance
and
generation
have valves
valves
ISO
products
condition.
utility
of
purchased
9001
DN50
fittings
and
potable EPAMS
towill
totargeted
requirements.
provide DN2000
water
dedicated
infrastructure
available
A be installed pipeline
A
DN80
products.
Ind
sectors.
diversified
solutions products
to of
for range
DN800
effectively
the key
andwith in a new
increasing
gratings. For
A complete
revolutionary
demands
high performancefrom traffic
syphonic rainwater
system
to for
products
range
increasing a purpose
low which
demands
system,
designed
density meet
consistingfrom the
applications,
traffic
of steel to Saint-Goba
a purpose d
An in
tonew generation potable water pipeline
range for products
low densityfrom applications, Saint-Gobain PAM UK targeted
gral
mentsand Integral Plus
saver
ete range
ediate ofinstallation.
BSofEN 545.
sewerage pipeline products available
fromengineering,
civil
available
itsnew
A
wideDN80
Valves
Control
optimum
tolerance
valves
generation to
condition.
utility
DN800 fittings
and with
of potable available of
water
dedicated
infrastructure
a new
external
products.
sectors.
revolutionary
pipeline protection,
products system
fullywith
compliant
increasing
with syphonic
the
demandsroof traffic
outlets rainwater access
range to
and cast iron a
for purpose
coverlowpipework designed
products
density provide
applications,
to BSof ENsteel solutio
877 Saint-Goba peac
esaver
diameter water pipes
MS
N80
nete to
rangeDN2000,of seweragefully compliant
pipeline with the
products available available PAM Estate
Induct
Access
of external Plus
covers and gratings
DN80protection,
to DN800 fullywith compliant
requirements
of aexternal
DN80
with
new revolutionary
to DN800
oftheBS EN fully
protection, 545.
system
a newaccess
compliant
range
with
A
BBA
complete
revolutionary
cover
for
syphonic
the
low
certified.
syphonic
system
products
density
roofutility
provide
applications,
outlets and
targeted
civil
access
cast iron
system,
solutions
Saint-Gobain
engineering,
coverpipework
consisting
productsto for
PAM
utility theUK
and
provide key
infrastructure
BS EN targeted
877
Ansec
solutio
contr
in
above ground
e diameter water pipes
MS
system BSI Kitemark approved to
Valves
PAM Estate
Induct
civil
access engineering,
cover products and
provide infrastructure
targeted sectors.
solutions for the key peac
Access Plus
requirements of BS EN 545. civil engineering, utility and infrastructure sec
ments
ameter
N80art
nete
of
toused
2,
above
BS
water
DN2000,
syphonicground
EN 598.
pipeline
fully
forrainwater
soil and
system products
compliant
waste
system,
BSI Kitemark available
with the
refurbishment,
consisting DN900
approved andtoto
of steel An
A
of external
Designed
covers and gratings
comprehensive
installationtoprotection,
meet range
accreditation
of
the requirements valves
fully compliant
requirements
scheme,
and and
PAM Estate
Integral and Integral Plus
accessories
with
designed ofthe
expectationsBStoEN suitable
giveof the
545. BBA certified. that
contr
fully
soil www.saint-gobain-pam.co.uk
compliant
2,stacks for withandthe
traditional requirements
appearance. toof BS
ENEN 545.
A
for
comprehensive
The
housing
A information
requirements
water and
comprehensive and Large diameter water pipes
ofgiven
BS
sewerage
commercial
range
rangein this
EN
ofliterature
545.
ductile
applications.
sectors.
of valves
iron
is, toAll
and
access
the bestcovers
valves
accessories ofare and
oursupplied
knowledge,
suitable
civilatengineering,
correct the time of going utility and infrastructure
to print. However, Saint-Gobain sectors. PAM UK is
sical
ments
ments Classical
of Plus
Ilkeston,
of BS
BS EN
EN Derbyshire, DE7 4QU
545.
598.
civil
Nonengineering,
Tidal
Your return
flapstockist
local
Access
valves
valves DN80
covers and gratings
PAM Estate
utility
is: DN80 and
Natural
toinfrastructure
to DN600 DN300 sectors.
A new generation of potable water pipeline products
incre
grati
e diameter
n80
water
rainwater
toTel:
pipes
DN2000,+44and(0)115
gutter
fully systems
compliant
930 to BSthe
5000with 460 BBA Quality
A comprehensive
Quality
YourTidal
Air local
Assurance
valvesrange
Management
flapstockist
valves DN80
is:
ofto
Systems ductileYouriron
DN600BS EN ISO
localaccess stockist
9001:2000covers is: and Environmental
Environmental
available DN80
Standard
Management
to ofDN800 Systems
with a newBS EN ISO 14001:2004
revolutionary
productssystem
range
incre
n. Seven
ments ofgutter
BS+44 andprofiles
EN 598. and circular and rectangular
PAM Estate A new generation potable water pipeline
eral
diameter water pipes
rainwater
ameter
pes
Fax:
Tel:
systems
. Seven
+44
water
gutter
gutter930
(0)115
(0)115 systems
932
pipelineinproducts
supplied
profiles and
9513
5000
a black
to BS
circular
460
available
primerandcoat.
BBA
DN900 to
rectangular
(Registered
gratings.
A comprehensive
Designed
Quality
AirFirevalves
For
to
hydrants
firm:
high
meet 12908)
performance
range
the of ductile
requirements
Management Systems BS EN ISO 9001:2000 products
ironand which
access
expectations meet
covers the
and
of the of external
Environmental
available DN80 protection,
Management fully
to DN800Systems compliant
with a new BS EN with the
ISO 14001:2004
revolutionary system
acces
range
civil e
ral
,ameter
pes
fully
Plus
eneration
Fax:
systems water+44
compliant
is a standard (0)115
withrange
pipelinewater
ofsupplied
potable
932
the
inproducts
9513
requirements
of gutters
pipeline
a black primer and
available of BS EN
downpipes
productsDN900 to
coat.
545. increasing
(Registered
gratings.
housing
Designed
Fire
range
For
andto
hydrants
Butterfly
for
demands
low
firm:
high
commercial
meet
valves
density
12908)
the
DN50
from
performance trafficproducts
sectors.
requirements
to
applications,DN2000
to aand purpose
Saint-Gobain
which
expectationsdesigned
meet
PAM
the
of
UK
the requirements
of external of
protection,BS EN 545.
fully compliant with the acces
civil e
e in
, Plus
fully
eeneration
DN80 a factory
compliant
to DN800 applied
with
with semi-gloss
the black
requirements
a new revolutionary finished
of coat
BSsystem
EN 545. increasing demands
housing and commercial sectors. from traffic to a purpose designed requirements of BS EN 545.
e ediate
nal in a
is a standard
of potable
installation.
protection,
factory fully
applied
range
water
compliant
of
semi-gloss
e DN80 to DN800 with a new revolutionary system
gutters
pipeline
with
and
the
black
downpipes
products
finished coat
access
Butterfly
range Control cover
for low products
valves
valvesdensity DN50 provideto DN2000
applications, targeted solutionsPAM
Saint-Gobain for the UKkey Large diameter water pipes PAM
ments
ediate
cal
nal ofinstallation.
stockist BS EN
protection, 545. compliant with the
is: fully civil engineering,
access
Control cover products
valves
utility and infrastructure
provide targeted solutions sectors. for the key Large diameter water pipes
Large diameter water pipeline products available DN900 to PAM Desig
MS
ments of BS EN
cal stockist is: 545. Induct Plus
civil engineering, utility and infrastructure sectors. DN2000,
Large fully compliant
diameter water pipeline with the requirements
products available ofDN900
BS EN 545. to hous
Desig
eetediameter
MS water
syphonic rainwater pipes
system, consisting of steel PAM
Induct
An Estate
Plus
installation accreditation scheme, designed to give DN2000, fully compliant with the requirements of BS EN 545. hous
eameter
diameter
cete
roof outlets and water
cast
waterrainwater
syphonic pipeline iron pipes
pipework
products
system, to BSDN900
available
consisting ENsteel
of 877to PAM
Designed
peace of Estate
to meet
mind
An installation the
and requirements
confidence
accreditation and
to water
scheme, expectations
utilitiesto
designed and of the
give
c,ified.
fully
roof compliant
outlets andwith
ametergiven
mation water castthe
ironrequirements
pipeline
in this
pipework to of
products
literature
BSBS
ENEN 545.
877
available
is, to the best of ourDN900 to correct
knowledge, contractors
Designed
peace to in
oftime
at the mind ofthe
meetand
going
housing and commercial sectors.
knowledge
the
confidence that
torequirements the
to water
print. However, and ductile
utilities
Saint-Gobain iron
expectationsand
PAMpipeline
of the
UK is
Your local stockist is:
y,ified.
looking at ways ofwith
fully compliant improving their products and
the requirements services
of BS EN 545. that they
and therefore
housing
contractors have
reserve
and the purchased
right
commercial
in the willwithout
to change,
sectors.
knowledge be installed
that theprior effectively
notice,
ductile and in
any pipeline
iron of the Your local stockist is:
gral and Integral Plus
mation given in this literature is, to the best of our knowledge, correct at the time of going to print. However,
ained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request.
y looking at ways of improving their products and services and therefore its optimum
that they have
reserve condition.
the purchased willThe
right to change,
Saint-Gobain
beinformation
installed
without
PAM
effectively
prior notice,
UK is
and in
any of the
gral and Integral Plus
nt-Gobain
ained PAM
in this
etestockist
cal
UK
publication. Any orders placedwww.saint-gobain-pam.co.uk
range ofis:sewerage pipeline products availablewill be subject to our Standard Conditions of Sale, available on request. given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Goba
www.saint-gobain-pam.co.uk www.saint-gobain-pam.co.uk
its optimum
The informationcondition. constantly
given in this literature is, to looking
the bestatofways of improving
our knowledge, their at
correct products and
the time ofservices
going toand therefore
print. reserve
However, the rightPAM
Saint-Gobain to change,
UK is without prior notice
Access covers and gratings
nt-Gobain PAM UK The information
data contained ingiven in this
thisand literature
publication. is, to the
Any therefore
orders best
placed of our
will be knowledge,
subject
right toto correct
our at the
Standard timenotice,
of going
Conditions toof
of any
Sale, print.
the However,
available Saint-Goba
on request.
N80 to DN2000,
etestockist
cal range fully compliant
ofis:sewerage with
pipeline products the available constantly looking at ways of improving their products services and reserve the change, without prior
www.saint-gobain-pam.co.uk Saint-Gobain PAM UK The information
data contained ingiven
this publication. constantly
in this literature
Any looking
is,Saint-Gobain
to the
orders
2011
at ways
best will
placed of
PAMour of improving
knowledge,
beUK
subject to our their
correct products
at the
Standard and services
time of going
Conditions and therefore
to print.
of Sale, reserve
However,
available Saint-Gobain PAM UK is without prior notice
on request.the right to change,
eameter
diameter water
water pipeline pipes
products available DN900 to PAM Estate
Designed www.saint-gobain-pam.co.uk
to meet the requirements and expectations of the
The information given in this literature is, to the best of our knowledge, correct at
constantly looking at ways of improving their products and services and therefore
yameter
Assurance
, fully compliant with the
water pipeline requirements
products ofDN900
available BS EN 545.
to Environmental
housing
Designedand
to meet www.saint-gobain-pam.co.uk
Standard
commercial
the sectors. and expectations of the
requirements
The information
data contained ingiven in this literature
this publication. is, to the
Any orders best will
placed of our
be knowledge, correct
subject to our
constantly looking at ways of improving their products and services and therefore
at
Standa
Saint-Gobain PAM UK 2011 Saint-Gobain PAM UK