Professional Documents
Culture Documents
The gasket will not damage the flange surface and can be easily removed.
Reduces maintenance costs and leakage - thanks to the camprofile gaskets reliability
and sealing performance.
The wide seating stress range (minimum to maximum seating stress) of The above values are based on parallel root form gaskets. The values have slight variations
the camprofile gasket makes it: for convex root form gaskets.
- Highly suitable for varying temperatures and pressures.
- Less sensitive to assembly faults (inaccurate bolt tensioning). Flange surface finish
- Suitable for light and heavy designed flanges. The recommended flange surface finish for camprofiles with sealing layers is from
3.2 to 6.3 m Ra (125-250 RMS), also referred to as a smooth finish, however stock finish
Dependent upon the layer material camprofile gaskets can resist is acceptable as well.
temperatures up to approx. 1000C.
CAMPROFILE GASKETS
Core thickness
Core thickness depends on the assembly circumstances. The most common
camprofile core thickness nowadays is 3 mm. When a camprofile is replacing Parallel root cores
an existing gasket, the use of a 4 mm. thick core should not be problematic.
Only in very exceptional situations using a thicker gasket might cause
SM20 Without centering ring
unnecessary stress on existing pipe runs, this especially in rigid systems.
(for male/female, tongue/groove and grooved flanges
Advantages of parallel root cores
Gasket profiles
All profiles feature a standard profile with a 1 mm cam pitch and a maximum
groove depth of 0.5 mm. Alternative profiles are available on request e.g. Convex root cores
1.5 mm cam pitch and a maximum groove depth
of 0.75 mm (DIN profile).
SM38
With integral centering ring
SM41
With floating centering ring,
attached outside the sealing area
CAMPROFILE GASKETS
Profile selection Note
Camprofile gaskets with centering rings ensure optimum gasket positioning Optimal gasket performance is ultimately ensured by flange surface finish and proper
between the bolts. Thermal-shock conditions (sudden changes in temperatures) assembly as well. Apart from standard round gaskets, camprofiles can be made in a
may damage camprofiles with integral centering rings (thermal tension may variety of shapes, oval, rectangular and exchanger gaskets with pass-bars. Correctly
cause cracks in the core). This is prevented by using camprofile gaskets with dimensioned drawings are required to make non-standard gaskets and gasket shapes.
floating guide rings.The centering rings on styles SM21 and SM41 allow for
expansion and contraction without reactionary forces being applied to the core. Core material selection
The core material is generally fabricated in identical material to the piping system
The SM21 and SM41 styles offer the following advantages
to prevent corrosion problems.Stainless steel 316 camprofiles cores are generally
The guide ring is stable and free from expansion stresses.
used with carbon steel pipe systems to prevent gasket corrosion.
No distortion of the centering ring by the threads of the bolts, as sometimes
occurs in vertical assemblies, causing the camprofile to be positioned eccentrically.
The recommended camprofile metal cores are shown in the table.
This also increases the possibility of re-use, reducing costs in the long run!
The floating guide ring allows for expansion without applying mechanical stress
to the camprofile core.
Stainless Steel 316 L (1) X2CrNiMo 1713 1.4404 316L 316S11/13 130 - 190 -100 550 7.9
Stainles s Steel 316 Ti X6Cr NiM oTi 1712 1.4571 316Ti 320S31 130 - 190 -100 550 7.8
Stainless Steel 321 X6CrNiTi 1810 1.4541 321 321S12/49/87 130 - 190 -250 550 7.9
Stainles s Steel 347 X6Cr NiNb 1810 1.4550 347 347S31 130 - 190 -250 55 0 7.9
A lum inium A l 99, 5 3.0255 - - 20 - 23 -250 300 2.73
Incoloy 800 X10NiCrAITi 3220 1.4876 N08800 3072-76 NA15 140 - 220 -100 850 8.0
Incoloy 825 NiCr 21 Mo 2.4858 N08825 3072-76 NA16 120 - 180 -100 450 8.14
Hastelloy B2 NiM o 28 2.4617 N106 65 - 170 - 230 -200 450 9.2
Hastelloy C276
NiM o16Cr15 W 2.4819 N102 76 - 170 - 230 -200 450 8.9
Titaniu m Ti 99,8 3.7025 - - 110 - 140 -250 350 4.5
(1)
Standard material for camprofile gaskets
CAMPROFILE GASKETS
Layer material selection Waranty exclusion
The following table may be used to determine the appropriate sealing layer In view of the variety of different installation and operation conditions as well as
material. Seaco recommends the use of graphite layers for most applications. application and process engineering options, the information given in this datasheet
Only in cases where graphite may cause media pollution, or is not chemically resistant, can only provide approximate guidance and cannot be used as basis for warranty
an alternative layer material should be chosen. claims.
Graphite
This is a universal, high quality, non-asbestos sealing material featuring:
Very good chemical resistance
Resistance to high (fluctuating) temperatures and pressures
Non ageing properties
Excellent gas tightness qualities
The standard graphite quality used has an ash content of < 2% and chloride
content < 50 ppm. Other graphite qualities are available on request.
PTFE (Teflon)
Is a high quality synthetic material featuring:
Excellent chemical resistance
Temperature resistant up to 250C
Good ageing resistance
Excellent gas tightness