You are on page 1of 2

Chameleon installer log - Sun May 28 05:57:30 PDT 2017

Installer version: 2.2svn 2404


======================================================
/dev/disk0 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *1.0 TB disk0
1: Windows_NTFS win 10 154.8 GB disk0s1
2: Windows_NTFS data 845.4 GB disk0s2
/dev/disk1 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *500.1 GB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS mac os 499.2 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
======================================================
Backup Chameleon files
======================================================
Clearing options...
======================================================
Running Standard postinstall script
Target volume = /Volumes/data on /dev/disk0s2
Target disk has existing Windows boot loader - Will replace with boot0md (boot0w
orkV2).
Detected a Windows installation on this volume.
/dev/rdisk0s2 is on a FAT32 volume formatted by Windows Explorer
======================================================
Written boot0md to /dev/disk0.
Written boot to /Volumes/data on /dev/disk0s2.
======================================================
Preparing to check target disk for previous installations.
Checking disk0.
Nothing found that could cause any problems.
======================================================
Disk: /dev/rdisk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
*1: 07 0 1 1 - 1023 254 63 [ 63 - 302391432] HPFS/QNX/AUX
2: 07 1023 254 63 - 1023 254 63 [ 302398832 - 1651121233] HPFS/QNX/AUX
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused

Windows is installed so that can remain the active partition


======================================================
Standard script complete
======================================================
Module ACPICodec installed
Module KernelPatcher installed
Module klibc installed
Module AutoReso installed
Module FileNVRAM installed
Module Sata installed
Module uClibc installed
Added boot option: EnableHDMIAudio=Yes
File Doesn't Exist, Will Create: /Volumes/data/Extra/org.chameleon.Boot.plist
Added boot option: Graphics Mode=1920x1200x32
Added boot option: GraphicsEnabler=Yes
======================================================
Running Post postinstall script
Target volume = /Volumes/data
===============================================
Unmount all volumes named EFI
/private/tmp/PKInstallSandbox.hT1XNH/Scripts/org.chameleon.post.LWTTml/UnMountEF
Ivolumes.sh: line 25: /private/tmp/PKInstallSandbox.hT1XNH/Scripts/org.chameleon
.post.LWTTml/InstallLog.sh: No such file or directory
/private/tmp/PKInstallSandbox.hT1XNH/Scripts/org.chameleon.post.LWTTml/UnMountEF
Ivolumes.sh: line 26: /private/tmp/PKInstallSandbox.hT1XNH/Scripts/org.chameleon
.post.LWTTml/InstallLog.sh: No such file or directory
======================================================
Post postinstall script complete

You might also like