Professional Documents
Culture Documents
MALAYSIAN
STANDARD
ICS: 91.100.30
Descriptors: masonry units, autoclaved aerated concrete, accessory units, dimensions, tolerances, bed
faces, configuration, density, compressive strength, thermal properties, permeability, initial
type tests
Copyright 2011
DEPARTMENT OF STANDARDS MALAYSIA
DEVELOPMENT OF MALAYSIAN STANDARDS
CONTENTS
Page
Foreword.................................................................................................................................... iii
1 Scope............................................................................................................................ 1
7 Marking ....................................................................................................................... 11
Table 2 Limit deviations for regular shaped units (in millimetres) .......................................... 6
Annex A Sampling for initial type testing and for independent testing of consignments .... 14
Committee representation
The Industry Standards Committee on Building, Construction and Civil Engineering (ISC D) under whose authority
this Malaysian Standard was developed, comprises representatives from the following organisations:
The Technical Committee on Bricks and Blocks which developed this Malaysian Standard consists of representatives
from the following organisations:
Co-opted members:
FOREWORD
This Malaysian Standard was developed by the Technical Committee on Bricks and Blocks
under the authority of the Industry Standards Committee on Building, Construction and Civil
Engineering.
MS 2282 consists of the following parts, under the general title Masonry Units - Specification:
Compliance with a Malaysian Standard does not of itself confer immunity from legal
obligations.