Professional Documents
Culture Documents
1) Name :
2) Roll No :
INSTRUCTIONS:
1)Assume suitably any data that is missing.
2)Answers should be written in correct serial order and each answer should start on
a separate page.
5) Submit both assignment and tutorial work together in a spiral bound booklet. Use
A4 size sheets. Insert page numbers.
ASSIGNMENT ASSESMENT Roll
No:
Q.No Date of Marks Signature Remarks
Submission
10
11
12
13
14
15
ASSIGNMENT QUESTIONS
Subject: Finite Element Method Class: BE CIVIL IV year II
semester( AY 16-17)
Using the figure 1 and data given below answer the following questions.
Q2) Carry out the assembly of the element matrices to form the structure stiffness matrix. Apply the
boundary conditions and obtain the reduced structure stiffness matrix. Form the global load vector.
A three bar truss is shown in figure. The area of cross section of each element is 500 mm 2 and E =
210 GPa. Use N, mm units in your calculations.
Figure 1
Q6) Explain plane stress and plane strain problems. Give examples. Obtain [D] matrices.
Using the figure 2 and data given below answer the following questions.
Q7) Obtain [k] matrix for the element. Its a plane stress case.
The triangular plate is fixed along one edge and is subjected to concentrated loads
at one of the nodes as shown in figure. Assume E = 70,000 Mpa, t = 10 mm and
Poissons ratio is 0.3.
Figure 2
Q10) What are shape functions. Write two properties of shape function.
Q11) What are isoparametric finite elements. Give examples. What are the
advantages of using isoparametric elements.
b) For a four noded rectangular element 1(0,0), 2(3,0), 3(3,2), 4(0,2), determine the
Jacobian matrix [J ] and strain-displacement matrix [B] at the centre of the
element.
Q14) Write strain displacement and stress-strain relation for axisymmetric problems
10
TUTORIAL QUESTIONS
Subject: FINITE ELEMENT METHOD Class: BE CIVIL IV year II
semester(AY 16-17)
Using the figure 2 and data given below answer the following questions.
Q3) Write the element stiffness matrices. Carry out the assembly of the element matrices to
form the structure stiffness matrix. Apply the boundary conditions and obtain the reduced structure
stiffness matrix. Form the global load vector. Solve for nodal displacement.
Figure 2
Q5)a)
b)
Q6)
Use Gaussian quadrature with two and three Gauss points and evaluate the
following integrals.
Q7)
Q8)
Q9)
Q10)
WRITE TUTORIAL QUESTION ANSWERS IN THE FOLLOWING
PAGES IN CORRECT SERIAL ORDER AND EACH ANSWER
SHOULD START IN A FRESH PAGE