Professional Documents
Culture Documents
Read this measurement guide from beginning to end before beginning. Read all warnings and cautions during unit installation.
Read and follow product installation guide for installation instructions.
Before Measuring:
Proper support of projecting bow and bay Be
sure rough opening is sound and suitable for window installation.
windows is required, see installation Existing opening must be plumb, level and square. If not, adjustments must be made
guidelines. Failure to do so may result in to window size when ordering.
injury and/or product/property damage.
Measuring Information:
Record measurements on Measurement Worksheet. (Allow for use of building wraps,
flashing,
sill panning, brackets, fasteners or other items).
Describe
window locations clearly. Record measurements (round down to nearest 1/8").
Measure each rough opening even if they appear the same size.
1 2 3
Interior Interior Interior
Level
Tape
Tape Measure
Measure
Tape
Measure
Measure rough opening width at bottom, Measure rough opening height at sides Check plumb, level, square. Diagonals
middle, and top. Record smallest width on and middle. Record smallest height on must be within 1/8".
worksheet (round down to nearest 1/8"). worksheet (round down to nearest 1/8").
Custom casement bay, box and bow windows are
available in 1 8" increments between minimum
Custom Casement 10 Bow Window Size and Projection Range and maximum width and height dimensions.
Window Dimension Projection
Center Window Minimum Maximum Minimum Maximum Minimum Maximum
Window Configuration Venting Configuration Width Width Height Height Depth Depth
Inches Inches Inches Inches Inches Inches
Venting or
3 Wide 52 1/2" 108 7/8" X 26 1/8" 73 7/8" 4 3/8" 7 5/8"
Stationary
Venting or
4 Wide 69 1/2" 143 7/8" X 26 1/8" 73 7/8" 7 3/8" 13 7/8"
Stationary
Venting or
5 Wide 85 7/8" 164 1/4" X 26 1/8" 73 7/8" 10 3/8" 18 5/8"
Stationary
Venting or
6 Wide 101 5/8" 164 1/4" X 26 1/8" 73 7/8" 14 7/8" 23 3/16"
Stationary
Venting or
7 Wide 116 5/8" 164 1/4" X 26 1/8" 73 7/8" 19 3/16" 26 3/8"
Stationary
Common venting configurations are shown; choose left venting, right venting or stationary.
For 30& 45Bay and 90Box Bay Window size and projection range tables, see page 2 on back side.
1 9044 8 8 5 BA Revised 01/24/11
Custom casement bay, box and bow windows are
available in 1 8" increments between minimum
Custom Casement 30 Angle Bay Window Size and Projection Range and maximum width and height dimensions.
Window Dimension Projection
Sash Ratio Center Window Minimum Maximum Minimum Maximum
Window Configuration Venting Configuration Width Width Height Height Minimum Maximum
Inches Inches Inches Inches Inches Inches
Venting or
1:1:1 1 1 1 1 1 150" 1 101 1/2" X 1 1 26 /8"
1
73 7/8" 1 10 1/4" 19 5/8"
Stationary
1 2 2 3 3
Venting or
1 1:2:1 1 1 1 1 1 1 67 3/8" 1 1137 /2"
1
X 26 11/8" 73 7/8" 10 1/4" 19 5/8"
Stationary
1 2 2 3 3
1 1:2:1 1 1 Picture 1
1 1 1 1
2 2 3 3
115 1/4" 137 5/8" X 38" 61 7/8" 16 5/8" 19 5/8"
Venting or
1:3:11 1 1 1 1 84 1/2" 144" X 26 1/8" 73 7/8" 10 1/4" 16 1/2"
Stationary
2 3 3
1:3:1 1 Picture
1 1
3 3
97 7/8" 116 7/8" X 38" 61 7/8" 11 5/8" 13 5/8"
Venting or
1:1:1 45 3/4" 91 1/4" X 26 1/8" 73 7/8" 14 3/16" 27 1/2"
Stationary
1
1
1
1
1 2 2 3 3
Venting or
1:2:1 63" 127 1/4" X 26 1/8" 73 7/8" 14 1/4" 27 1/2"
Stationary
1
1
1
1
1 2 2 3 3
1:2:1 Picture
1
1
1
2 2 3 3
106 7/8" 127 1/4" X 38" 61 7/8" 23 1/4" 27 1/2"
Venting or
1:3:1 80 1/8" 144" X 26 1/8" 73 7/8" 14 1/4" 24 5/16"
Stationary
1
1
1
2 3 3
1:3:1 Picture
1
1
3 3
92 3/4" 110 3/8" X 38" 61 7/8" 16 1/4" 19"
Venting or
36 3/8" 74 1/4" X 26 1/8" 73 7/8" 17" 35 7/8" 21 1/2" 40 3/8"
Stationary
Picture 53 1/2" 110 3/8" X 26 1/8" 73 7/8" 17" 35 7/8" 21 1/2" 40 3/8"
Common venting configurations are shown; choose left venting, right venting, stationary or picture window.
2 9044885
Measurement Worksheet Page of
for Andersen 400 Series Custom-Size Casement Bow/Bay/Box Windows
NAME PHONE
Customer
ADDRESS E-MAIL
Window
Style & 30 bay 30Angle Bay Jamb
Operation
Andersen Side
10 bow 90 box bay Extension Jambs
45 bay
exterior interior
Color
& Finish white Terratone white - painted clear pine
sandtone forest green white - vinyl wrapped Angled Side
Flange
Glass non-tempered tempered Stormwatch Impact Resistant Glass
Options
45Angle Bay Jamb
Low-E4 glass
Low-E4 glass
Low-E4 SmartSun glass
Low-E4 SmartSun glass
Andersen Side
Extension Jambs
Low-E4 Sun glass Monolithic
Andersen
Adaptor
Grille Divided Light removable Finelight no grille
Style & Size
6 6
Side
Flange
with no no spacer, removable between
spacer spacer removable interior only glass
interior
Andersen and all other marks where denoted are trademarks of Andersen Corporation. 2011 Andersen Corporation. All rights reserved. 9044885
Measurement Worksheet Page of
for Andersen 400 Series Custom-Size Casement Bow/Bay/Box Windows
NAME PHONE
Customer
ADDRESS E-MAIL
Window
Style & 30 bay 30Angle Bay Jamb
Operation
Andersen Side
10 bow 90 box bay Extension Jambs
45 bay
exterior interior
Color
& Finish white Terratone white - painted clear pine
sandtone forest green white - vinyl wrapped Angled Side
Flange
Glass non-tempered tempered Stormwatch Impact Resistant Glass
Options
45Angle Bay Jamb
Low-E4 glass
Low-E4 glass
Low-E4 SmartSun glass
Low-E4 SmartSun glass
Andersen Side
Extension Jambs
Low-E4 Sun glass Monolithic
Andersen
Adaptor
Grille Divided Light removable Finelight no grille
Style & Size
6 6
Side
Flange
with no no spacer, removable between
spacer spacer removable interior only glass
interior
Andersen and all other marks where denoted are trademarks of Andersen Corporation. 2011 Andersen Corporation. All rights reserved. 9044885