Professional Documents
Culture Documents
Topology
Project
Date : 05/04/2017
Global settings
Project type : Plane strain
Analysis type : Stress
Tunnels : yes
Advanced input : no
Detailed results : no
Concrete structures : EN 1992-1-1 (EC2)
Interface
No. Interface location Coordinates of interface points [m]
x z x z x z
1 -25,00 16,90 25,00 16,90
1
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Name Sample g E n
3 [MPa] []
[kN/m ]
3 QM 20,50 65,00 0,30
2 QS 21,00
3 QM 20,50
4 TS 20,00
Free points
No. Location No. Location No. Location No. Location
x [m] z [m] x [m] z [m] x [m] z [m] x [m] z [m]
1 5,40 0,34 2 5,40 -0,66 3 5,40 -1,29 4 4,35 -2,72
5 -3,87 -2,72 6 -4,92 -1,29 7 -4,92 -0,66 8 -4,92 0,34
9 1,12 -2,04 10 0,00 5,49 11 -5,32 0,34 12 5,80 0,34
Free lines
No. Type of Mode of Lines topology
line input
1 segment Origin (5,40; 0,34) [m] , end (5,40; -0,66) [m]
2 segment Origin (5,40; -0,66) [m] , end (5,40; -1,29) [m]
3 segment Origin (-4,92; -1,29) [m] , end (-4,92; -0,66) [m]
4 segment Origin (-4,92; -0,66) [m] , end (-4,92; 0,34) [m]
5 arc radius Origin (-3,87; -2,72) [m] , end (4,35; -2,72) [m], radius 10,16 [m] , orientation positive , angle
acute
6 arc radius Origin (5,40; -1,29) [m] , end (4,35; -2,72) [m], radius 2,26 [m] , orientation negative , angle
acute
7 arc radius Origin (-4,92; -1,29) [m] , end (-3,87; -2,72) [m], radius 2,26 [m] , orientation positive , angle
acute
8 arc radius Origin (-4,92; 0,34) [m] , end (0,00; 5,49) [m], radius 5,16 [m] , orientation negative , angle
acute
4
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Type of Mode of Lines topology
line input
9 arc radius Origin (0,00; 5,49) [m] , end (5,40; 0,34) [m], radius 5,16 [m] , orientation negative , angle
acute
10 arc radius Origin (-4,92; -0,66) [m] , end (1,12; -2,04) [m], radius 10,08 [m] , orientation positive , angle
acute
11 arc radius Origin (1,12; -2,04) [m] , end (5,40; -0,66) [m], radius 10,08 [m] , orientation positive , angle
acute
12 segment Origin (-4,92; 0,34) [m] , end (-5,32; 0,34) [m]
13 segment Origin (5,40; 0,34) [m] , end (5,80; 0,34) [m]
14 arc radius Origin (0,00; 5,49) [m] , end (1,12; -2,04) [m], radius 10,16 [m] , orientation negative , angle
acute
15 arc radius Origin (-5,32; 0,34) [m] , end (5,80; 0,34) [m], radius 5,56 [m] , orientation negative , angle
acute
Mesh generation
Mesh generation parameters
1 Active
QS
2 Active
QM
3 Active
TS
4 Active
5
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Region Active / Assigned soil
inactive
VOUTE PARAPLUIE
5 Active
TS
6 Active
TS
7 Active
TS
8 Active
Line supports
No. Location Support
Direction X Direction Z
A1 Mesh line No. 11 fixed free
A2 Mesh line No. 9 fixed free
A3 Mesh line No. 6 fixed free
A4 Mesh line No. 3 fixed free
A5 Mesh line No. 13 fixed free
A6 Mesh line No. 8 fixed free
A7 Mesh line No. 5 fixed free
A8 Mesh line No. 1 fixed free
A9 Mesh line No. 12 fixed fixed
A1 up to A9 - automatically generated line supports along model edges
Surcharge
Location / Origin / Length / Width / Slope Magnitude
No. Type Point 1 Point 1 Point 2 Point 2
z [m] / x1 x [m] / z1 l [m] / x2 b [m] / z2 a [] q, q1, f, F q2
unit
[m] [m] [m] [m]
2
1 strip on terrain x = -25,00 l = 50,00 0,00 30,00 kN/m
Surcharges
No. Name
1 Q
Water
Water type : No water
6
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Analysis settings
General
Method : Newton - Raphson
Stiffness matrix change : after each iteration
Max. number of iterations for one calc. step : 100
Initial calculation step : 0,25
Displacement error : 0,0100
Imbalanced forces error : 0,0100
Energy error : 0,0100
Respect material interfaces : no
Newton - Raphson
Relaxation factor of calculation step : 2
Maximum number of relaxations of calculation step : 2
Min. number of iterations for one calc. step : 1
Line search
Solution method : iterate no
Line search limit - minimum : 0,100
Line search limit - maximum : 1,000
Plasticity
Return mapping error : 0,00100
Max. number of iterations for one plast. step : 20
Stress (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Sigma Z, tot. [kPa] -25,00 16,90 0,00 -1,00 -33,00 1019,53
Sigma Z, eff. [kPa] -25,00 16,90 0,00 -1,00 -33,00 1019,53
Sigma X, tot. [kPa] -25,00 16,90 17,33 -1,00 -33,00 436,93
Sigma X, eff. [kPa] -25,00 16,90 17,33 -1,00 -33,00 436,93
Tau XZ [kPa] 4,50 3,91 -73,26 -4,02 3,91 76,07
Strain (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Epsilon eq. [%] -0,73 5,82 0,10 -1,00 -33,00 0,73
Epsilon eq., pl. [%] -25,00 13,90 0,00 -25,00 13,90 0,00
7
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Input data (Stage of construction 2)
Assignment and activation
No. Region Active / Assigned soil
inactive
R
1 Active
QS
2 Active
QM
3 Active
TS
4 Active
VOUTE PARAPLUIE
5 Active
TS
6 Active
7 Inactive
8
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Region Active / Assigned soil
inactive
TS
8 Active
Beams
Displacements (extremes)
10
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Location Min Location Max
x [m] z [m] x [m] z [m]
Displacements x [m] -3,49 3,90 -1,7 -4,92 0,34 2,5
Displacements z [m] -0,98 -2,01 -11,4 -23,00 -33,00 0,0
Stress (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Sigma Z, tot. [kPa] -25,00 16,90 0,00 23,00 -33,00 1009,98
Sigma Z, eff. [kPa] -25,00 16,90 0,00 23,00 -33,00 1009,98
Sigma X, tot. [kPa] -25,00 16,90 17,41 23,00 -33,00 432,49
Sigma X, eff. [kPa] -25,00 16,90 17,41 23,00 -33,00 432,49
Tau XZ [kPa] 4,50 3,91 -79,58 -3,49 3,90 218,54
Strain (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Epsilon eq. [%] -1,90 5,03 0,04 23,00 -33,00 0,72
Epsilon eq., pl. [%] -25,00 13,90 0,00 -3,02 -1,54 0,09
11
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Attained Settlement Settlement Sigma Z, Sigma X,
loading d d tot. tot.
Z X
[%] [mm] [mm] [kPa] [kPa]
75,0 -1,4 0,0 56,70 23,56
100,0 -1,8 0,1 56,68 23,63
2 0,0 0,0 0,0 262,03 139,14
25,0 -0,9 -0,2 267,00 187,29
50,0 -1,7 -0,3 276,68 199,76
75,0 -2,5 -0,5 286,93 212,09
100,0 -3,4 -0,7 298,15 223,05
3 0,0 0,0 0,0 397,40 172,57
25,0 -0,9 -0,2 419,25 181,55
50,0 -1,7 -0,4 420,58 180,46
75,0 -2,6 -0,6 422,59 179,44
100,0 -3,4 -1,0 425,97 178,79
1 Active
QS
2 Active
QM
3 Active
TS
4 Active
VOUTE PARAPLUIE
5 Active
12
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Region Active / Assigned soil
inactive
6 Inactive
7 Inactive
TS
8 Active
Beams
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
1 No No Free line Yes without without (not (not
No. 8 modification modification inputted) inputted)
2 No No Free line Yes without without (not (not
No. 14 modification modification inputted) inputted)
3 No No Free line Yes without without (not (not
No. 10 modification modification inputted) inputted)
4 No No Free line Yes without without (not (not
No. 4 modification modification inputted) inputted)
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
5 Yes Yes m /m; Iy = MPa; a =
No. 9 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
28551,00
A= MPa; G =
Free line 4,82E-01 11606,00 (not (not
2
6 Yes Yes m /m; Iy = MPa; a =
No. 1 9,30E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
13
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
7 Yes Yes m /m; Iy = MPa; a =
No. 11 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
No. Cross-section Material
4 2 E [MPa] G [MPa]
Iy [m /m] A [m /m]
1 1,60E-03 2,31E-01 31418,00 12771,00
2 1,60E-03 2,31E-01 31418,00 12771,00
3 1,60E-03 2,31E-01 31418,00 12771,00
4 9,30E-03 4,81E-01 28551,00 11606,00
5 1,60E-03 2,31E-01 31418,00 12771,00
6 9,30E-03 4,82E-01 28551,00 11606,00
7 1,60E-03 2,31E-01 31418,00 12771,00
Line supports
No. Line support Location Support
new modified Direction X Direction Z
A1 Yes Mesh line No. 11 fixed free
A2 Yes Mesh line No. 9 fixed free
A3 Yes Mesh line No. 6 fixed free
A4 Yes Mesh line No. 3 fixed free
A5 Yes Mesh line No. 13 fixed free
A6 Yes Mesh line No. 8 fixed free
A7 Yes Mesh line No. 5 fixed free
A8 Yes Mesh line No. 1 fixed free
A9 Yes Mesh line No. 12 fixed fixed
A1 up to A9 - automatically generated line supports along model edges
Surcharge
Surcharge Location Origin / Length / Width / Slope Magnitude
No. Type / Point 1 Point 1 Point 2 Point 2
new change z [m] / x1 x [m] / z1 l [m] / x2 b [m] / z2 a [] q, q1, f, F q2
unit
[m] [m] [m] [m]
1 No No strip on terrain x = l = 50,00 0,00 30,00 2
kN/m
-25,00
Surcharges
No. Name
1 Q
Water
Water type : No water
Analysis settings
General
Method : Newton - Raphson
Stiffness matrix change : after each iteration
Max. number of iterations for one calc. step : 100
Initial calculation step : 0,25
Displacement error : 0,0100
14
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Imbalanced forces error : 0,0100
Energy error : 0,0100
Respect material interfaces : no
Newton - Raphson
Relaxation factor of calculation step : 2
Maximum number of relaxations of calculation step : 2
Min. number of iterations for one calc. step : 1
Line search
Solution method : iterate no
Line search limit - minimum : 0,100
Line search limit - maximum : 1,000
Plasticity
Return mapping error : 0,00100
Max. number of iterations for one plast. step : 20
Displacements (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Displacements x [m] 1,29 1,83 -19,2 -4,92 0,34 4,1
Displacements z [m] -0,98 -2,01 -17,8 3,02 5,16 0,0
Stress (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Sigma Z, tot. [kPa] -25,00 16,90 0,00 23,00 -33,00 1003,70
Sigma Z, eff. [kPa] -25,00 16,90 0,00 23,00 -33,00 1003,70
Sigma X, tot. [kPa] 25,00 16,90 17,46 23,00 -33,00 429,43
Sigma X, eff. [kPa] 25,00 16,90 17,46 23,00 -33,00 429,43
Tau XZ [kPa] 3,80 4,07 -223,90 -3,49 3,90 217,44
Strain (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Epsilon eq. [%] 0,00 5,49 0,04 23,00 -33,00 0,72
Epsilon eq., pl. [%] -25,00 13,90 0,00 -3,02 -1,54 0,18
15
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Monitors
No. Monitor Active Monitor type Point / Point 1 Point 2 Results
new x [m] z [m] x [m] z [m] Variable Value Unit
Settlement d Z -1,5 [mm]
1 No Yes point -2,36 16,90 Settlement d X -0,1 [mm]
Sigma 56,68 [kPa]
Z, tot.
Sigma 24,22 [kPa]
X, tot.
1 Active
QS
2 Active
16
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Region Active / Assigned soil
inactive
QM
3 Active
TS
4 Active
VOUTE PARAPLUIE
5 Active
6 Inactive
7 Inactive
TS
8 Active
Beams
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
1 No No Free line Yes without without (not (not
No. 8 modification modification inputted) inputted)
2 No No Free line Yes without without (not (not
No. 10 modification modification inputted) inputted)
3 No No Free line Yes without without (not (not
No. 4 modification modification inputted) inputted)
4 No No Free line Yes without without (not (not
No. 9 modification modification inputted) inputted)
17
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
5 No No Free line Yes without without (not (not
No. 1 modification modification inputted) inputted)
6 No No Free line Yes without without (not (not
No. 11 modification modification inputted) inputted)
No. Cross-section Material
4 2 E [MPa] G [MPa]
Iy [m /m] A [m /m]
1 1,60E-03 2,31E-01 31418,00 12771,00
2 1,60E-03 2,31E-01 31418,00 12771,00
3 9,30E-03 4,81E-01 28551,00 11606,00
4 1,60E-03 2,31E-01 31418,00 12771,00
5 9,30E-03 4,82E-01 28551,00 11606,00
6 1,60E-03 2,31E-01 31418,00 12771,00
Line supports
No. Line support Location Support
new modified Direction X Direction Z
A1 Yes Mesh line No. 11 fixed free
A2 Yes Mesh line No. 9 fixed free
A3 Yes Mesh line No. 6 fixed free
A4 Yes Mesh line No. 3 fixed free
A5 Yes Mesh line No. 13 fixed free
A6 Yes Mesh line No. 8 fixed free
A7 Yes Mesh line No. 5 fixed free
A8 Yes Mesh line No. 1 fixed free
A9 Yes Mesh line No. 12 fixed fixed
A1 up to A9 - automatically generated line supports along model edges
Surcharge
Surcharge Location Origin / Length / Width / Slope Magnitude
No. Type / Point 1 Point 1 Point 2 Point 2
new change z [m] / x1 x [m] / z1 l [m] / x2 b [m] / z2 a [] q, q1, f, F q2
unit
[m] [m] [m] [m]
1 No No strip on terrain x = l = 50,00 0,00 30,00 2
kN/m
-25,00
Surcharges
No. Name
1 Q
Water
Water type : No water
Analysis settings
General
Method : Newton - Raphson
Stiffness matrix change : after each iteration
Max. number of iterations for one calc. step : 100
Initial calculation step : 0,25
Displacement error : 0,0100
Imbalanced forces error : 0,0100
Energy error : 0,0100
Respect material interfaces : no
Newton - Raphson
Relaxation factor of calculation step : 2
18
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Maximum number of relaxations of calculation step : 2
Min. number of iterations for one calc. step : 1
Line search
Solution method : iterate no
Line search limit - minimum : 0,100
Line search limit - maximum : 1,000
Plasticity
Return mapping error : 0,00100
Max. number of iterations for one plast. step : 20
Displacements (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Displacements x [m] 5,40 0,34 -7,6 -4,92 0,34 7,6
Displacements z [m] -0,98 -2,01 -22,0 0,00 5,49 7,9
Stress (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Sigma Z, tot. [kPa] -25,00 16,90 0,00 -21,00 -33,00 1005,82
Sigma Z, eff. [kPa] -25,00 16,90 0,00 -21,00 -33,00 1005,82
Sigma X, tot. [kPa] 25,00 16,90 16,70 -21,00 -33,00 430,02
Sigma X, eff. [kPa] 25,00 16,90 16,70 -21,00 -33,00 430,02
Tau XZ [kPa] 3,80 4,07 -202,57 -3,49 3,90 196,82
Strain (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Epsilon eq. [%] 0,00 5,49 0,05 -21,00 -33,00 0,72
Epsilon eq., pl. [%] -25,00 13,90 0,00 -3,87 -2,72 0,26
19
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Monitors
No. Monitor Active Monitor type Point / Point 1 Point 2 Results
new x [m] z [m] x [m] z [m] Variable Value Unit
Settlement d Z 3,6 [mm]
1 No Yes point -2,36 16,90 Settlement d X -1,5 [mm]
Sigma 56,37 [kPa]
Z, tot.
Sigma 28,11 [kPa]
X, tot.
1 Active
QS
2 Active
20
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Region Active / Assigned soil
inactive
QM
3 Active
TS
4 Active
VOUTE PARAPLUIE
5 Active
6 Inactive
7 Inactive
TS
8 Active
Beams
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
1 No No Free line Yes without without (not (not
No. 8 modification modification inputted) inputted)
2 No No Free line Yes without without (not (not
No. 4 modification modification inputted) inputted)
3 No No Free line Yes without without (not (not
No. 9 modification modification inputted) inputted)
4 No No Free line Yes without without (not (not
No. 1 modification modification inputted) inputted)
21
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
5 Yes Yes m /m; Iy = MPa; a =
No. 5 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
6 Yes Yes m /m; Iy = MPa; a =
No. 7 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
7 Yes Yes m /m; Iy = MPa; a =
No. 6 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
8 Yes Yes m /m; Iy = MPa; a =
No. 3 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
9 Yes Yes m /m; Iy = MPa; a =
No. 2 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
No. Cross-section Material
4 2 E [MPa] G [MPa]
Iy [m /m] A [m /m]
1 1,60E-03 2,31E-01 31418,00 12771,00
2 9,30E-03 4,81E-01 28551,00 11606,00
3 1,60E-03 2,31E-01 31418,00 12771,00
4 9,30E-03 4,82E-01 28551,00 11606,00
5 1,60E-03 2,31E-01 31418,00 12771,00
6 1,60E-03 2,31E-01 31418,00 12771,00
7 1,60E-03 2,31E-01 31418,00 12771,00
8 1,60E-03 2,31E-01 31418,00 12771,00
9 1,60E-03 2,31E-01 31418,00 12771,00
22
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Point supports
No. Point support Location Support
new modified Direction X Direction Z About Y
1 Yes Mesh point No. 17 free fixed free
2 Yes Mesh point No. 12 free fixed free
Line supports
No. Line support Location Support
new modified Direction X Direction Z
A1 Yes Mesh line No. 11 fixed free
A2 Yes Mesh line No. 9 fixed free
A3 Yes Mesh line No. 6 fixed free
A4 Yes Mesh line No. 3 fixed free
A5 Yes Mesh line No. 13 fixed free
A6 Yes Mesh line No. 8 fixed free
A7 Yes Mesh line No. 5 fixed free
A8 Yes Mesh line No. 1 fixed free
A9 Yes Mesh line No. 12 fixed fixed
A1 up to A9 - automatically generated line supports along model edges
Surcharge
Surcharge Location Origin / Length / Width / Slope Magnitude
No. Type / Point 1 Point 1 Point 2 Point 2
new change z [m] / x1 x [m] / z1 l [m] / x2 b [m] / z2 a [] q, q1, f, F q2
unit
[m] [m] [m] [m]
1 No No strip on terrain x = l = 50,00 0,00 30,00 2
kN/m
-25,00
Surcharges
No. Name
1 Q
Water
Water type : No water
Analysis settings
General
Method : Newton - Raphson
Stiffness matrix change : after each iteration
Max. number of iterations for one calc. step : 100
Initial calculation step : 0,25
Displacement error : 0,0100
Imbalanced forces error : 0,0100
Energy error : 0,0100
Respect material interfaces : no
Newton - Raphson
Relaxation factor of calculation step : 2
Maximum number of relaxations of calculation step : 2
Min. number of iterations for one calc. step : 1
Line search
Solution method : iterate no
Line search limit - minimum : 0,100
Line search limit - maximum : 1,000
Plasticity
Return mapping error : 0,00100
Max. number of iterations for one plast. step : 20
23
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Analysis settings : standard
Attained loading = 100,00 %
Extremes
Displacements (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Displacements x [m] 5,40 -0,66 -5,6 -4,92 -0,66 5,6
Displacements z [m] 1,12 -2,04 -26,3 0,00 5,49 5,8
Stress (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Sigma Z, tot. [kPa] -0,98 -2,01 0,00 -21,00 -33,00 1002,22
Sigma Z, eff. [kPa] -0,98 -2,01 0,00 -21,00 -33,00 1002,22
Sigma X, tot. [kPa] 25,00 16,90 16,73 -21,00 -33,00 428,31
Sigma X, eff. [kPa] 25,00 16,90 16,73 -21,00 -33,00 428,31
Tau XZ [kPa] 3,80 4,07 -192,89 -4,55 2,26 188,58
Strain (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Epsilon eq. [%] 0,00 5,49 0,04 -4,92 -0,66 0,74
Epsilon eq., pl. [%] -25,00 13,90 0,00 -3,02 -1,54 0,63
24
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Attained Settlement Settlement Sigma Z, Sigma X,
loading d d tot. tot.
Z X
[%] [mm] [mm] [kPa] [kPa]
1 0,0 3,7 -1,5 56,37 28,11
25,0 3,4 -1,4 56,39 27,92
50,0 3,1 -1,4 56,40 27,73
75,0 2,8 -1,3 56,42 27,53
100,0 2,5 -1,2 56,44 27,30
2 0,0 7,9 -0,1 164,61 307,32
25,0 7,4 -0,1 168,81 307,72
50,0 6,9 -0,1 173,08 308,14
75,0 6,4 -0,1 177,71 308,59
100,0 5,8 -0,1 183,09 309,12
3 0,0 -21,6 -0,6 107,56 89,65
25,0 -22,5 -0,6 88,03 75,06
50,0 -23,5 -0,7 68,34 62,15
75,0 -24,7 -0,9 47,98 46,87
100,0 -26,3 -1,3 21,84 21,88
1 Active
QS
2 Active
QM
3 Active
TS
4 Active
25
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Region Active / Assigned soil
inactive
VOUTE PARAPLUIE
5 Active
6 Inactive
7 Inactive
8 Inactive
Beams
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
1 No No Free line Yes without without (not (not
No. 8 modification modification inputted) inputted)
2 No No Free line Yes without without (not (not
No. 4 modification modification inputted) inputted)
3 No No Free line Yes without without (not (not
No. 9 modification modification inputted) inputted)
4 No No Free line Yes without without (not (not
No. 1 modification modification inputted) inputted)
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
5 Yes Yes m /m; Iy = MPa; a =
No. 3 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
26
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Beam Support [m] Include Cross-sectio Material / Contacts
No. Location /
self Degradation Beam
new modified Start pt. End pt. in current current left right
weight
stage [%] activity [%]
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
6 Yes Yes m /m; Iy = MPa; a =
No. 7 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
7 Yes Yes m /m; Iy = MPa; a =
No. 5 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
8 Yes Yes m /m; Iy = MPa; a =
No. 6 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
E=
31418,00
A= MPa; G =
Free line 2,31E-01 12771,00 (not (not
2
9 Yes Yes m /m; Iy = MPa; a =
No. 2 1,60E-03 1,000000 inputted) inputted)
4
m /m 1/K; g =
10,00
3
kN/m
No. Cross-section Material
4 2 E [MPa] G [MPa]
Iy [m /m] A [m /m]
1 1,60E-03 2,31E-01 31418,00 12771,00
2 9,30E-03 4,81E-01 28551,00 11606,00
3 1,60E-03 2,31E-01 31418,00 12771,00
4 9,30E-03 4,82E-01 28551,00 11606,00
5 1,60E-03 2,31E-01 31418,00 12771,00
6 1,60E-03 2,31E-01 31418,00 12771,00
7 1,60E-03 2,31E-01 31418,00 12771,00
8 1,60E-03 2,31E-01 31418,00 12771,00
9 1,60E-03 2,31E-01 31418,00 12771,00
Point supports
No. Point support Location Support
new modified Direction X Direction Z About Y
1 No No Mesh point No. 17 free fixed free
2 No No Mesh point No. 12 free fixed free
27
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Line supports
No. Line support Location Support
new modified Direction X Direction Z
A1 Yes Mesh line No. 11 fixed free
A2 Yes Mesh line No. 9 fixed free
A3 Yes Mesh line No. 6 fixed free
A4 Yes Mesh line No. 3 fixed free
A5 Yes Mesh line No. 13 fixed free
A6 Yes Mesh line No. 8 fixed free
A7 Yes Mesh line No. 5 fixed free
A8 Yes Mesh line No. 1 fixed free
A9 Yes Mesh line No. 12 fixed fixed
A1 up to A9 - automatically generated line supports along model edges
Surcharge
Surcharge Location Origin / Length / Width / Slope Magnitude
No. Type / Point 1 Point 1 Point 2 Point 2
new change z [m] / x1 x [m] / z1 l [m] / x2 b [m] / z2 a [] q, q1, f, F q unit
2
[m] [m] [m] [m]
1 No No strip on terrain x = l = 50,00 0,00 30,00 2
kN/m
-25,00
Surcharges
No. Name
1 Q
Water
Water type : No water
Analysis settings
General
Method : Newton - Raphson
Stiffness matrix change : after each iteration
Max. number of iterations for one calc. step : 100
Initial calculation step : 0,25
Displacement error : 0,0100
Imbalanced forces error : 0,0100
Energy error : 0,0100
Respect material interfaces : no
Newton - Raphson
Relaxation factor of calculation step : 2
Maximum number of relaxations of calculation step : 2
Min. number of iterations for one calc. step : 1
Line search
Solution method : iterate no
Line search limit - minimum : 0,100
Line search limit - maximum : 1,000
Plasticity
Return mapping error : 0,00100
Max. number of iterations for one plast. step : 20
Displacements (extremes)
28
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Location Min Location Max
x [m] z [m] x [m] z [m]
Displacements x [m] 5,40 -0,66 -6,2 -4,92 -0,66 6,1
Displacements z [m] 0,24 -3,59 -25,5 0,00 5,49 5,9
Stress (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Sigma Z, tot. [kPa] -25,00 16,90 0,00 -21,00 -33,00 1001,07
Sigma Z, eff. [kPa] -25,00 16,90 0,00 -21,00 -33,00 1001,07
Sigma X, tot. [kPa] 25,00 16,90 16,68 -21,00 -33,00 427,71
Sigma X, eff. [kPa] 25,00 16,90 16,68 -21,00 -33,00 427,71
Tau XZ [kPa] 3,80 4,07 -193,91 -4,55 2,26 189,56
Strain (extremes)
Location Min Location Max
x [m] z [m] x [m] z [m]
Epsilon eq. [%] 0,00 5,49 0,04 -21,00 -33,00 0,72
Epsilon eq., pl. [%] -25,00 13,90 0,00 -3,87 -2,72 0,27
29
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. Attained Settlement Settlement Sigma Z, Sigma X,
loading d d tot. tot.
Z X
[%] [mm] [mm] [kPa] [kPa]
25,0 5,8 -0,1 182,64 309,06
50,0 5,9 -0,1 182,19 308,99
75,0 5,9 -0,1 181,74 308,93
100,0 5,9 -0,1 181,28 308,87
3 0,0 -26,3 -1,3 21,84 21,88
100,0
30
[GeoStructural Analysis - FEM | version 5.19.4.0 | Copyright 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]