Professional Documents
Culture Documents
*1Z0012101F*
koda Auto pursues a policy of constant product and model development. We trust that you will understand that changes to models in
terms of shape, equipment and engineering, may be introduced at any time. It is therefore not possible for legal claims to be made
based on the data, illustrations and descriptions contained in this Owners Manual.
Reprint, reproduction or translation, either in whole or in part, is not permitted without the written consent from koda Auto.
koda Auto expressly reserves all rights relating to copyright laws.
We reserve the right to make changes to this document.
Published by KODA AUTO a. s.
KODA AUTO a.s. 2007
s1uk.a.book Page 1 Wednesday, May 2, 2007 12:50 PM
Contents 1
Contents
Radio ....................................... 2
Radio - Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important information . . . . . . . . . . . . . . . . . . . . . . . . 2
Anti-theft protection . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CD player ................................. 7
2 Radio
Radio
Radio - Overview A
14 Current waveband FM1/AM1 (memory spaces 1 - 6) or FM2/AM2 (memory
spaces 7 - 12)
A
1 Rotary/push knob A
15 Selected station key
Radio 3
WARNING Note
Please always pay full attention to the traffic situation around you! As the The code is stored in the instrument cluster. Through this it is automatically
driver you are fully responsible for the traffic safety. Only use the functions decoded (convenience coding). A manual entry of the code is normally not
in such a way that you always maintain the control over your vehicle in all necessary.
traffic situations!
Enter code
Using the display
Switch on the radio if the ignition is on. SAFE is displayed and then
Carefully handle the display because dents and scratches can occur through pres- 1000.
sure of the finger or contact with sharp objects.
Enter the safety code using the station keys 1 - 4 .
The display can be cleaned with a soft cloth and finger marks can be wiped away
with pure alcohol. Confirm the safety code by pressing the station key 6 .
If you have confirmed a wrongly entered code, you can repeat once again the entire
Note process.
Do not use solvent such as turpentine or petrol as they will corrode the display If the code number is entered incorrectly for the second time, the unit will be
surface. blocked for approx. one hour. It is only possible to repeat the entry of the safety
code after an hour has expired and while the unit is switched on and the ignition
key remains in the ignition lock.
Anti-theft protection The cycle - two attempts, blocked for an hour - furthermore applies.
Anti-theft coding
Basic setting
Your radio is equipped with a convenience coding. If the radio is being operated for
the first time, the safety code is not only stored in the radio but also in the vehicle. Switching the unit on and off
After disconnecting and reconnecting the battery, first of all switch on the ignition
and then the radio. The system is switched on or off by pressing the rotary/push knob A
1 .
If you wish to install the radio in another vehicle, the safety code must be entered.
In this case, please do not hesitate to contact a koda Service Partner or a koda If the key is pulled out of the ignition lock when the system is switched on, the
importer. system switches off automatically. You can switch on again the unit by pressing the
rotary/push knob A 1 . If the engine is switched off, the unit (protection of the vehicle
As the unit only functions after entering the safety code, this practically excludes its battery before discharging) switches off automatically after approx. one hour.
use after a theft - a contribution to increased anti-theft safety.
s1uk.a.book Page 4 Wednesday, May 2, 2007 12:50 PM
4 Radio
If you have switched off the radio by withdrawing the ignition key, the radio Setting the special functions
switches on again once the ignition is on.
Press the button TP for some considerable time, in order to activate
Audio settings the menu Setup.
Once again press the button TP or the rocker switch or , in
Setting treble order to select the individual functions of the menu.
Press the button , TRE appears in the display. Confirm the changed setting with the button A
1 .
Set the desired value by turning the button A. 1
By pressing the button TP for some considerable time or 30 seconds
after the setting, the set values are automatically stored and the unit
Setting the bass
returns to the normal mode.
Once again press the button , BASS appears in the display.
GALA
Set the desired value by turning the button A
1 .
Your radio increases automatically its volume with the increasing vehicle speed. A
By pressing again the button or 5 seconds after the setting, the set values are higher setting value results in a stronger volume increase.
stored and the radio returns to the normal mode.
ON VOL
Your radio stores the last volume set before switching off. If the value is higher, the
Adjusting volume ratio volume is reduced to the value of the parameter ON VOL after switching on the
radio again.
Balance PHONE
Press the button A
3 , BAL appears in the display. If your vehicle is equipped with a handsfree system, you can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the
You can set with the button A 1 the desired value of the volume ratio
vehicle.
between the left and right side.
AUX
Fader Switching on or off the functions of the external audio source.
Press the button A
3 repetitively, FAD appears in the display.
You can set the desired value in the range of LEV1 to LEV3. If you set the value OFF,
You can set with the button A
1 the desired value of the volume ratio the tone is not replayed from the external audio source.
between the front and the rear. REG AUTO / REG OFF
By pressing again the button A 3 or 5 seconds after the setting, the set values are
Certain programs of the broadcasting companies are divided into regional
stored and the radio returns to the normal mode. programs at specific times. That is why in individual regions the regional programs
of a station can broadcast different contents.
s1uk.a.book Page 5 Wednesday, May 2, 2007 12:50 PM
Radio 5
First of all the unit attempts to set only alternative frequencies of the selected The process of searching for and storing the radio stations
station.
If the quality is however so low, that there is a risk of a program loss, the unit also Manual search
accepts related frequencies. Set the frequency of the desired radio station by pressing the rocker
When opting for REG AUTO the change to a regional related station can only be switch or .
performed if there is a risk of losing the station. When selecting REGIONAL OFF, the
receiver can access the regional related station unlimited. Automatic station finding SEEK
BEEP The radio searches for the next radio station in the selected waveband
Switching on or off the tone signal when storing the radio stations. by pressing the button or .
CD Function SCAN
Play function of the CD tack (tracks) in continuous or random order. If you select CD The radio station of the current waveband is briefly played (10
PLAY, the tracks are replayed in normal order. If you select CD SCHFFL (Schuffle), seconds) by pressing the button SCAN .
the tracks are replayed in random order.
This function is ended by pressing the button SCAN once again and
LOUD the current station is replayed.
In case of low volume level, the function reinforces the range of bass and treble
frequencies. Store station
After selecting the radio station, hold the station key A
7 , on which it
Note should be stored until it briefly switches to mute and a brief signal
Each setting change is stored by changing to another menu point. sounds.
6 Radio
Note
The stored radio stations are updated and stored once again by repetitively
pressing the button AS .
Radio text
Note
The text information must not be available to all radio stations.
Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters.
Traffic reports
CD player 7
CD player
8 CD player
Caution
Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the
surface of the CD could get damaged.
Never expose CDs to direct sun rays!
Please never write or affix the CD!
Note
Dirt or damage of a CD can lead to difficulties when reading the information. The
difficulty in reading the error depends on the dirt or on the severity of the mechan-
ical damage. Severe scratches cause reading errors which can make the CD jump or
get stuck. All CDs must be treated carefully and always be stored in a protective
case.
External CD changer
*1Z0012101F*