Professional Documents
Culture Documents
OBJECTIVE
My objective is to work as a team member in a reputable Organization which will improvise my engineering,
management and decision making skills. I believe in my ability to deliver tangible results.
EXPERTISE
• Site survey and analysis of technical requirement and coordination with end user to establish basic design
criteria.
• Preparation of Instrumentation / automation design including formulation of control & automation schematics
/ philosophies, logic diagrams, instrument data sheets, instrument hook up details, control wiring & cabling,
general specifications, BOQ, Material Take-offs, etc.
PROFESSIONAL EXPERIENCE
More than 02 years of experience as Instrument Design Engineer in reputed Oil & Gas Design Firm with key
experience in ESD, F&G & other Field Instrumentation like valves, Transmitters.
Familiar with various Internationals standards like API, IEC, BS, NFPA etc.
MAJOR PROJECTS:
This project scope comprises of providing design house services to ENI Ltd. To prepare all instrument and
electrical related detail design documents necessary for procurement and execution of project. To supervise
construction contractors during project execution.
• Designing of Fire & Gas Detection Systems including formulation of basic philosophies, equipment and
system specifications, Layout drawings, associated cabling and control system, etc.
• Area classification for hazardous location based on relevant codes and standards.
• Sizing of pressure relief valves, control valves & flow meters.
• Preparation of Instrumentation design drawings / layouts including distribution systems, cabling, lighting,
earthing, etc. along with preparation of BOQs, specifications, data sheets, material take-offs, etc.
o Project: Review Of Design And Operational Optimization Of EPF Facility
This project is meant to enhance the gas capacity from 4MMScfd to 15MMScfd and to design a SIL 3 rated
Fire & Gas Detection System for Dehydration plant and upto 24 Wellheads with its complete control and
design philosophy by means of cause and effect matrix.
• Study and review of P&IDs for enhancements to 4MMScfd to 15MMScfd and development
equipment/instruments layouts.
• Amendment of field instruments from pneumatic to electronic with all its control loops, electronic hookups
drawings, and internal control cabinets wiring drawings, cable schedules, cable sizing and cable layout
drawings.
• Designing of Fire & Gas Detection Systems including formulation of basic philosophies, equipment and
system specifications, Layout drawings, associated cabling and control system, etc.
• Area classification for hazardous location based on relevant codes and standards.
o Project: Detail Designing For Provision Of ATG System For Shell Pakistan Ltd At Tarujabba Depot
This project scope comprises of provision of detail design documents for installation of Tank gauging system
on 05 numbers Fixed and Internal Floating Roof Storage Tanks.
Completion of Instrument and Electrical Data Sheets, Earthing Layouts, Single line Diagrams, Typical Hook-
up detail’s and Bill of Quantity.
o Project: Detail Designing For Provision Of ATG System For Bosicor Refinery Storage Tanks.
This project scope comprises of provision of detail design documents for installation of Tank gauging system
on 46 numbers Fixed, Internal Floating and External Floating Roof Storage Tanks.
o Project: Detail Designing For Provision Of Overfill Protection System For Shell Pakistan Limited at Machike
and Chaklala.
This project scope comprises of provision of detail design documents for installation of Tank gauging system
on 05 numbers Fixed and Internal Floating Roof Storage Tanks.
Job Responsibilities:
• P & ID Review.
• Control System Specifications.
• Ladder Logic Drawings.
• Control Valve Sizing (Fisher & Masoneilan)
• Orifice Sizing (Isize Tool)
• Lighting (Calculux)
• Fire and Gas Dispersion Modeling (Shell Fred)
• Loop Diagrams.
• Cable Routing Schedule.
• Termination Diagrams.
• Datasheets.
• Installation Details.
• Instrument Hook-up Drawings.
• Co-ordination with Vendors & Sub-contractors.
• Supervision of Instrumentation of Instrumentation Works, Installation of Various Equipments and
Commissioning.
o Design of Micro Motion Mass Flow Meter(Emerson) for Shell Honk Kong.
o Design of PD Meter(Smith) with complete all its specification.
WORKED IN TELENOR PAKISTAN(JANUARY 2008 TO MARCH 2008)
Major working in “RF AND PLANNING SECTOR” section with hands on knowledge of different processes
like
• Clarification of HANDOVER TECHNIQUES,
• Drive Test.
• The basic idea to develop a wireless communication device because the future is in wireless.
• The splendor of the project is that, all this multipoint communication just utilizes single frequency of 433
MHz i.e. maximum bandwidth utilization, and can be further expanded to handle multi channel or Spread
Spectrum technique (CDMA)
WORKSHOPS ATTENDED:
Workshop for Youth “Lets Discover The Leader in You” organized by City District Government.
One day workshop on “Enhancing Quality and Productivity through Interview and Presentation Skill”.
Two days work shop on ISO CERTIFICATIONS 9001-2000.
SEMINARS ATTENDED
Seminar on “The Energy Crisis in Pakistan-Power Generation from Coal, a Major Option” organized by the
Institution of Engineers, Pakistan in collaboration with the Federation of Pakistan, Chambers of Commerce and
Industry (FPCCI).
ACADEMY