Professional Documents
Culture Documents
3 CODE
Volume -1
PART 4
Examination
1
ASME B 31.3
Final Exam
1. To have a safe Pressure Test of Piping which type of test will
you recommend?
a. Hydrostatic
b. Pneumatic
c. Either a or b both are equally safe.
d. Code does not accept a or b
a. Category M
b. Category D
c. Category N
d. Category K
a. 150 psig
b. 130 psig
c. 165 psig
d. None of above
a. 40 psig
b. 20 psig
c. 25 psig
d. 80 psig
2
a. Pneumatic test must be done using air only and
no other gas..
b. For hydro testing water alone can be used and no
other liquid.
c. Pneumatic test shall be conducted only if
hydrostatic test is impracticable.
d. a and c above
a. 60 minutes
b. 45 minutes
c. 30 minutes
d. 10 minutes
a. 10 years
b. 8 years
c. 6 years
d. 4 years
10. After PWHT, the hardness of weld and Heat affected Zone will
generally -------------
a. Increase
b. May increase or reduce.
3
c. Remain unaffected.
d. Reduce.
11. ASME B 16.5 permits pipe flanges made from plates for which
of the following type?
a. Slip on type
b. Weld neck type
c. Blind flanges
d. None of above
12. Suitable Class for pipe flanges (A105) for Design pr = 400 psi,
design temp = 400oF will be:
a. Class 600
b. Class 300
c. Class 400
d. None of the above
a. 300psig
b. 1000psig
c. 1100psig
d. 1125 psig
a. 7 ft-lbs
b. 10 ft-lbs
c. 13 ft-lbs
d. 15 ft-lbs
4
16. A NPS 10 pipe made from ASTM A53 Grade B carbon steel is to
be checked for thickness (t). The pipe operates at 975
degrees F. Determine the coefficient Y.
a. 0.4
b. 0.5
c. 0.6
d. 0.7
17. You have a fluid that does not operate at high pressure. The
fluid is not toxic. The fluid is not flammable. Exposure to the
fluid will not cause damage to human tissue. The design gage
pressure is 120 psi and the operating temperature is 1000F.
What category fluid service would you design?
18. If a pneumatic Pressure test test is used, the test pressure shall
be __________% of design pressure.
a. 50
b. 150
c. 125
d. 110
a. 5
b. 10
c. 15
d. 20
5
c. 150 psi and 450 psi
6
ASME B31.3
Final Exam
ANSWER KEY
Q. ANS.
1 a
2 a
3 b
4 c
5 c
6 c
7 b
8 d
9 a
10 d
11 c
12 b
13 d
14 c
15 d
16 b
17 b
18 d
19 b
20 b