Professional Documents
Culture Documents
Network 3D
Blu-ray Disc /
DVD Player
with Karaoke
BP440K
www.lg.com
P/NO : MFL68142801_1.0
Getting Started 3
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
Use of controls, adjustments or the performance of 1
DO NOT OPEN procedures other than those specified herein may
Getting Started
result in hazardous radiation exposure.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO CAUTION concerning the Power Cord
USER-SERVICEABLE PARTS INSIDE REFER SERVICING Most appliances recommend they be placed upon
TO QUALIFIED SERVICE PERSONNEL. a dedicated circuit;
That is, a single outlet circuit which powers only
This lightning flash with arrowhead that appliance and has no additional outlets or
symbol within an equilateral triangle branch circuits. Check the specification page of this
is intended to alert the user to the owners manual to be certain. Do not overload wall
presence of uninsulated dangerous outlets. Overloaded wall outlets, loose or damaged
voltage within the products wall outlets, extension cords, frayed power cords, or
enclosure that may be of sufficient magnitude to damaged or cracked wire insulation are dangerous.
constitute a risk of electric shock to persons. Any of these conditions could result in electric
The exclamation point within an shock or fire. Periodically examine the cord of your
equilateral triangle is intended appliance, and if its appearance indicates damage
to alert the user to the presence or deterioration, unplug it, discontinue use of the
of important operating and appliance, and have the cord replaced with an
maintenance (servicing) instructions exact replacement part by an authorized service
in the literature accompanying the product. center. Protect the power cord from physical or
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK mechanical abuse, such as being twisted, kinked,
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN pinched, closed in a door, or walked upon. Pay
OR MOISTURE. particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
WARNING: Do not install this equipment in a
disconnect power from the mains, pull out the
confined space such as a book case or similar unit.
mains cord plug. When installing the product,
CAUTION: Do not block any ventilation openings. ensure that the plug is easily accessible.
Install in accordance with the manufacturers
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturers
instruction has been adhered to.
4 Getting Started
contamination of the environment and bring on analogue signal output, etc., of AACS protected
possible threat to human and animal health, the contents. The operation of this product and
old battery or the battery put it in the appropriate restrictions on this product may vary depending
container at designated collection points. Do on your time of purchase as those restrictions
not dispose of batteries or battery together with may be adopted and/or changed by AACS after
other waste. It is recommended that you use the production of this product.
local, free reimbursement systems batteries and
yy Furthermore, BD-ROM Mark and BD+ are
accumulators. The battery shall not be exposed to
additionally used as content protection systems
excessive heat such as sunshine, fire or the like.
for Blu-ray Disc format, which imposes certain
CAUTION: The apparatus shall not be exposed to restrictions including playback restrictions for
water (dripping or splashing) and no objects filled BD-ROM Mark and/or BD+ protected contents.
with liquids, such as vases, shall be placed on the To obtain additional information on AACS, BD-
apparatus. ROM Mark, BD+, or this product, please contact
an authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
Getting Started 5
Getting Started
yy If you are experiencing headache, tiredness
Only the multi system color TV can receive all
or dizziness while viewing contents in 3D,
signals output from the player.
it is strongly recommended to stop the
yy If you have a PAL color system TV, you will see playback and rest until you feel normal.
just distorted images when using discs or video
contents recorded in NTSC.
yy The multi system color TV changes the color
system automatically according to input signals.
In case that the color system is not changed
automatically, turn it off and then on to see
normal images on screen.
yy Even if the disc recorded in NTSC color system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
6 Table of Contents
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
8 Getting Started
Introduction
Getting Started
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW, Regional Code
DVDR/RW, BD-R/RE) may not be playable. This unit has a regional code printed on the rear of
yy BD-R/RE, DVDR/RW and CD-R/RW discs the unit. This unit can play only BD-ROM or DVD
recorded using a personal computer or a discs labelled same as the rear of the unit or ALL.
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the players lens. System Select
yy If you record a disc using a personal Open the disc tray using the B (OPEN/CLOSE)
computer, even if it is recorded in a button and then, press and hold M (PAUSE) for
compatible format, there are cases in which more than five seconds to change the color system
it may not play because of the settings of (PAL /NTSC /AUTO).
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
10 Getting Started
Remote Control
1 a d
1 (POWER): Switches the player Colored (R, G, Y, B) buttons: Use
Getting Started
Front Panel
Getting Started
a Disc Tray d Display Window
b (MIC.1/MIC.2) MIC Jack connectors e Remote Sensor
* According to TV model or brand, karaoke f B (OPEN / CLOSE)
sound from mic can be delayed when TV and g N (PLAY / PAUSE)
the unit are connected directly, so please
connect the unit with an amplifier to enjoy h Z (STOP)
karaoke with mic. i 1/! (POWER)
c (-VOL.+) MIC Volume control j USB Port
Rear Panel
Connecting
LG TVs with SIMPLINK function has the logo as then press ENTER (b) to move to the third level.
shown above.
,,Note
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
,,Note Connecting to an
yy If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
Amplifier
1. Press B to open the disc tray.
Make one of the following connections, depending
2. Press Z (STOP) for more than 5 seconds. on the capabilities of your existing equipment.
yy If you select a resolution manually and then yy HDMI Audio connection (page 15)
connect the HDMI jack to TV and your TV
yy Digital Audio connection (page 15)
does not accept it, the resolution setting is
2 set to [Auto]. Since many factors affect the type of audio output,
see Audio Output Specifications for details (page
yy If you select a resolution that your TV
Connecting
58).
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
About Digital Multi-channel sound
wait 20 seconds and the resolution will A digital multi-channel connection provides the
automatically revert back to the previous best sound quality. For this, you need a multi-
resolution. channel Audio/Video Receiver that supports one
or more of the audio formats supported by your
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or player. Check the logos on the front of the Audio/
50 Hz depending both on the capability Video receiver and the manual. (PCM Stereo, PCM
and preference of the connected TV and Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby
based on the native video frame rate of the TrueHD, DTS and/or DTS-HD)
content on the BD-ROM disc.
Connecting 15
Connecting
Coaxial
cable
HDMI cable
Receiver/Amplifier
Receiver/Amplifier
HDMI cable
You will need to activate the players digital output.
(See [AUDIO] Menu on page 23.)
TV
Connecting to your
Home Network Broadband
service
,,Note
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on Rear of the unit
the lock.
yy Do not connect a modular phone cable to
the LAN port. Wired Network Setup
yy Since there are various connection If there is a DHCP server on the local area network
configurations, please follow the (LAN) via wired connection, this player will
specifications of your telecommunication automatically be allocated an IP address. After
carrier or internet service provider. making the physical connection, a small number of
yy If you want to access content from DLNA home networks may require the players network
servers, this player must be connected to setting to be adjusted. Adjust the [NETWORK]
the same local area network with them via a setting as follow.
router.
yy To set your PC as a DLNA server, install the Preparation
SmartShare PC Software on your PC. (page Before setting the wired network, you need to
33) connect the broadband internet to your home
network.
Connecting 17
Connecting
highlighted.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
Network will automatically be connected to the [Gateway] and [DNS Server] using
unit. W/S/A/D and numerical buttons. If you
make a mistake while entering a number, press
CLEAR to clear the highlighted part.
Notes on Network Connection yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
yy Many network connection problems during
service. Depending on the access method of and
set up can often be fixed by re-setting the
subscriber agreement with your ISP, you may not
router or modem. After connecting the player
be able to use the internet connection feature
to the home network, quickly power off and/
contained in this player or you may be limited
or disconnect the power cable of the home
to the number of devices you can connect at
network router or cable modem. Then power on
the same time. (If your ISP limits subscription to
and/or connect the power cable again.
one device, this player may not be allowed to
yy Depending on the internet service provider (ISP), connect when a PC is already connected.)
2 the number of devices that can receive internet
yy The use of a Router may not be allowed or its
service may be limited by the applicable terms
usage may be limited depending on the policies
Connecting
Initial Setup 4. Check all the settings that you have set in the
previous steps.
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press 1 (POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/D to select a display language Press ENTER (b) while [Finish] is highlighted
and press ENTER (b). to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).
5. Displays private sound mode guide. Press ENTER
(b). 3
System Setting
3. Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
Connection Status
If you want to check tshe network status on this
3 player, select the [Connection Status] options and
2. Use A/D to select the [Settings] and press press ENTER (b) to check whether a connection
System Setting
ENTER (b). The [Settings] menu appears. to the network and the internet have been
established.
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
3. Use W/S to select the first setup option, and Internet access is permitted for all BD-Live
press D to move to the second level. contents.
[Partially permitted]
Internet access is permitted only for BD-
Live contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-Live contents
without a certificate.
[Prohibited]
4. Use W/S to select a second setup option, and
Internet access is prohibited for all BD-Live
press ENTER (b) to move to the third level.
contents.
System Setting
This function allows you to control the playback Select when a 16:9 wide TV is connected. The
of media streamed from DLNA media server by a 4:3 picture is displayed with an original 4:3
DLNA certified smartphone. Most DLNA certified aspect ratio, with black bars appearing at the
smartphone has a function to control the playback left and right sides.
media on your home network. Set this option to
[On] for allowing your smartphone to control this [16:9 Full]
unit. Refer to instructions of your DLNA certified Select when a 16:9 wide TV is connected. The
smartphone or the application for more detailed 4:3 picture is adjusted horizontally (in a linear
information. proportion) to fill the entire screen.
,,Note ,,Note
yy This unit and the DLNA Certified
You cannot select [4:3 Letter Box] and
Smartphone must be connected to the
[4:3 Pan Scan] option when the resolution is
same network.
set to higher than 720p.
yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME
(b) to display the home menu before
connecting to this unit.
yy While controlling the unit using the
[Network Play] function, the remote control
may not work.
yy Available file formats described on page
55 are not always supported on [Network
Play] function.
22 System Setting
[Auto] [YCbCr]
If the HDMI OUT jack is connected to Select when connecting to a HDMI display
TVs providing display information (EDID), device.
automatically selects the resolution best suited
to the connected TV. [RGB]
Select when connecting to a DVI display
[576p] device.
Outputs 576 lines of progressive video.
[720p] 3D Mode
3 Outputs 720 lines of progressive video. Select the type of output mode for Blu-ray 3D disc
playback. (This function is activated only when 3D
[1080i]
System Setting
TV is connected.)
Outputs 1080 lines of interlaced video.
[On]
[1080p]
Blu-ray 3D disc playback will output as 3D
Outputs 1080 lines of progressive video. mode.
[Off]
1080p Display Mode
Blu-ray 3D disc playback will output as 2D
When the resolution is set to 1080p, select mode like a normal BD-ROM disc playback.
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input. Home Menu Guide
This function allows you to display or delete the
,,Note guide bubble on the Home Menu. Set this option
yy When you select [24 Hz], you may to [On] for displaying guide.
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
System Setting 23
System Setting
Press ENTER (b) to select another language. TrueHD, DTS and DTS-HD decoder.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number [PCM]
according to the language code list on page Select if you connect this units HDMI OUT jack
61. to a device with digital decoder or DIGITAL
AUDIO OUT jack to a device with two channel
[Off] (Disc Subtitle only)
digital stereo decoder.
Turn off Subtitle.
[DTS Re-Encode]
,,Note Select if you connect this units HDMI OUT or
Depending on the disc, your language setting DIGITAL AUDIO OUT jack to a device with DTS
may not work. decoder.
,,Note
yy When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the Bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [Auto]).
24 System Setting
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
System Setting 25
System Setting
[Change] All BD-ROM can be played.
Enter the current password and press ENTER
[0-254]
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password. Prohibits play of BD-ROM with corresponding
ratings recorded on them.
If you forget your password
If you forget your password, you can clear it using ,,Note
the following steps: The [Blu-ray Disc Rating] will be applied
1. Remove any disc that might be in the player. only for the Blu-ray disc that containing the
Advanced Rating Control.
2. Highlight [Password] option in the [Settings]
menu.
3. Use Number buttons to enter 210499. The Area Code
password is cleared.
Enter the code of the area whose standards were
,,Note used to rate the DVD video disc, based on the list
on page 60.
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
26 System Setting
your registration.
[Register]
Auto Power Off
Displays the registration code of your player.
The screen saver appears when you leave the
[Deregister] player in Stop mode for about 5 minutes. If you
Deactivate your player and display the set this option to [On], the unit automatically
deactivation code. turns off within 15 minutes since the Screen Saver
is displayed. Set this option to [Off ] to leave the
,,Note screen saver until the unit is operated by the user.
All the downloaded videos from DivX(R) VOD
with this players registration code can only be
played on this unit.
System Setting 27
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the
connected USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have
to set all the activation for the on-line services
and network settings again.
3
System Setting
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
(see page 53).
28 Operating
4
,,Note
Depending on the region, the [LG Smart
World], [My Apps], [d] and [c] may not be
Operating
Operating
on the [Settings] menu to [On] (page 22).
yy Depending on the BD-ROM titles, a USB 2. Press B (OPEN/CLOSE), and place a disc on the
device connection may be needed for the disc tray.
proper playback.
3. Press B (OPEN/CLOSE) to close the disc tray.
yy Unfinalized DVD-VR format discs may not
be played in this player. The playback starts automatically.
yy Some DVD-VR discs are made with CPRM 4. Refer to the owners manual of your 3D-ready
data by DVD RECORDER. This unit cannot TV for the further instruction.
support these kinds of discs. You may need to adjust the display settings and
focus on your TVs setting for the improved 3D
effect.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
30 Operating
the number of content stored in the USB storage USB Multi-reader, the USB device may not be
device. Press ENTER (b) while [Cancel] is selected recognized.
to stop loading. yy Some USB device may not work with this unit.
2. Press HOME (b). yy Some digital cameras and mobile phones are
3. Select [SmartShare] and press ENTER (b). not supported.
yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
Operating
File loading may take few minutes depending on
the number of content stored in Android device.
4. Select [Movie], [Photo] or [Music].
Operating
1. Start up your computer, visit http://www.lg.com. referring to the actual operations of your
If necessary, select your region. language version.
2. Click support tab.
3. Fill your model name on the cover of owners
manual in search bar.
4. Find and download the SmartShare PC
Software (DLNA) file.
34 Operating
yy For more information, click [HELP] on the yy Windows Media Player 11.0 or higher
[Settings] menu. yy Network environment: 100 Mb Ethernet, WLAN
Operating 35
Operating
during playback.
To display the disc menu
You can change the various playback speeds by
pressing c or v repeatedly. The menu screen may be displayed first after
loading a disc which contains a menu. If you want
To slow down the playing speed to display the disc menu during playback, press
DISC MENU.
(Video)
Use W/S/A/D buttons to navigate through
While the playback is paused, press v repeatedly menu items.
to play various speeds of slow motion.
To display the Pop-up menu
To skip to the next/previous
Some BD-ROM discs contain Pop-up menu that
chapter/track/file appears during playback.
During playback, press C or V to go to the Press TITLE/POPUP during playback, and use W/
next chapter/track/file or to return to the beginning S/A/D buttons to navigate through menu
of the current chapter/track/file. items.
Press C twice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of content in a folder together. In this
case, press C or V to go to the previous or
next content with same type.
36 Operating
Operating
a Progress bar - Displays the current position a Title Current title number/total number of
and total playing time. titles.
b [Disc Menu] - Accesses menu on a disc. b Chapter Current chapter number/total
number of chapters.
c [Title/Popup] - Displays the DVD title menu
or BD-ROMs pop-up menu, if available. c Time Elapsed playing time/total playback
time.
d [Option] - Displays playback information.
d Audio Selected audio language or channel.
e [Repeat] - Repeats a desired section or
sequence. (page 39) e Subtitle Selected subtitle.
f [3D] - Adjusts the 3D setting. (page 43) f Angle Selected angle/total number of
angles.
g TV Aspect Ratio Selected TV aspect ratio.
h Picture Mode Selected picture mode.
38 Operating
Operating
Audio CDs/Audio files eroy
During playback, press REPEAT (h) repeatedly to 1. During playback, press INFO/MENU (m).
select a desired repeat mode.
2. Select an [Option] using A/D, and press
Selected portion will be repeated continually. ENTER (b)
(Audio CD only) 3. Select the [Time] option and then input the
Track The current track or file will be played required start time in hours, minutes, and
back repeatedly. seconds from left to right.
All All the tracks or files will be played back For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter 21020.
repeatedly.
Press A/D to skip the playback 60 seconds
All All the tracks or files will be played forward or backward.
back repeatedly in random order.
4. Press ENTER (b) to start playback from selected
The tracks or files will be played back in time.
random order.
,,Note
To return to normal playback, press CLEAR. yy This function may not work on some disc or
titles.
,,Note yy This function may not work depending on
This function may not work on some disc or
the file type and ability of the DLNA server.
title.
40 Operating
Operating
5. Press BACK (1) to exit the On-Screen display.
,,Note
The information displayed on the screen
may not correct comparing actual content
information.
Changing content list view Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
4 yui you play the video file.
On the [SmartShare] menu, you can change the
,,Note
Operating
Operating
DLNA server DLNA server along the lyrics or rhythm displayed on the screen.
The microphone must be connected to the MIC.1
5. Use W/S to select a file or a folder you wish to
or MIC.2 jack on the front panel.
play.
1. Put a Karaoke DVD or disc in the disc tray.
2. Connect the microphone to the MIC.1 or MIC.2
jack.
3. Play a Karaoke DVD or disc back.
4. Turn on the power switch of microphone and
adjust the volume (- VOL.+) properly.
,,Note
yy If the distorted noises or howling are
Select g and press ENTER (b) to display the occurred while using microphone, move
upper directory. the microphone away from your speakers.
yy If you do not use the microphone, turn
,,Note down the volume (- VOL.+) and disconnect
When selecting audio file from a server, folder the microphone.
selection is not available. Only file selection is
available. yy HDMI will be PCM STEREO while
Microphone is connected regardless of any
setting of AUDIO SETUP.
6. Use D to select [OK], and press ENTER (b) to
complete music selection.
44 Operating
,,Note 4
yy For audio CD recording, use the USB flash
drive / external HDD formatted in FAT32
Operating
only.
yy Audio track is recorded to an audio file with
192 kbps.
yy Recording times in the table above are
approximate.
yy Actual recording time for USB storage
device varies depending on the USB storage
devices ability.
yy Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
yy The length of the audio should be longer
than 20 seconds for the proper recording.
yy Do not turn off this player or extract the
connected USB storage device during Audio
CD recording.
46 Operating
,,Note
yy For detailed information of each service, 4. Select a category using A/D, and press ENTER
4 (b).
contact to the content provider or visit
support link of the service.
Operating
Operating
applications, press red (R) colored button on yy Depending on the region, the [LG Smart
[LG Apps] or [My Apps] screen, and select World], [My Apps], [d] and [c] may not be
[Account Setting] option. available.
yy The search function does not search
content in every online services. It works
only in certain online services.
48 Operating
Move an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/S to select [Move], and press ENTER
4 (b).
3. Use W/S/A/D to select a position you want
Operating
Delete an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/S to select [Delete], and press
ENTER(b).
3. Use A/D to select [Yes], and press ENTER (b)
to confirm.
,,Note
Depending on the region, the [LG Smart
World], [My Apps], [d] and [c] may not be
available.
Troubleshooting 49
Troubleshooting
General
Troubleshooting
yy An USB device which requires additional program installation when
you have connected it to a computer is not supported.
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed. yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or yy The files are not recorded in a format that the unit can play.
music files. yy The unit does not support the codec of the movie file.
The remote control does not yy The remote control is not pointed at the remote sensor of the unit.
work properly. yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the You can reset the unit as follows.
power will not turn on or off. yy Unplug the power cord, wait at least five seconds, and then plug it in
The unit is not operating again.
normally.
50 Troubleshooting
Network
5
Troubleshooting
Troubleshooting 51
Picture
Blu-ray 3D disc playback does yy Connect the player to your TV with HDMI cable (Type A, High Speed
not output 3D views. HDMI Cable).
yy Your TV may not support HDMI 3D mandatory format.
yy The [3D Mode] option in the [Settings] menu is set to [Off ].
Set the option to [On].
Customer support 5
You can update the Player using the latest software to enhance the products operation and/or add new
Troubleshooting
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
[Cancel]
Exits the update menu and the 6
home menu appears.
Appendix
Option 2:
If the software update is available from the update The player will check for the newest update.
server, the Update icon appears in the Home
menu. Press blue (B) colored button to start the ,,Note
update procedure. yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
No update is found. appears. Press ENTER
(b) to return to the [Home Menu].
54 Appendix
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
,,Note
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
6 the latest software from the authorized LG
Electronics Service Center then update your
Appendix
Additional Information
File requirement
Video files
File File Audio
Codec Format Subtitle
Location Extension Format
.avi, .divx, .mpg, DIVX 3.11, DIVX4, DIVX5, Dolby SubRip (.srt / .txt), SAMI (.smi),
.mpeg, .mkv, DIVX6 (standard playback Digital, SubStation Alpha (.ssa/.txt),
.mp4, .asf, .wmv, only), DTS, MP3, MicroDVD (.sub/.txt), VobSub
Disc, .m4v (DRM free), XVID, MPEG1 SS, H.264/ WMA, (.sub), SubViewer 1.0 (.sub),
USB .vob, .3gp, .mov, MPEG-4 AVC, MPEG2 AAC, AC3 SubViewer 2.0 (.sub/.txt),
.trp, .m2t, .mpe, PS, MPEG2 TS, VC-1 SM TMPlayer (.txt), DVD Subtitle
.m1v, .m2v, .wm, (WMV3) System (.txt)
.flv, .ts, .dat
.avi, .divx, .mpg, DIVX 3.11, DIVX4, DIVX5, Dolby SubRip (.srt / .txt), SAMI
.mpeg, .mkv, DIVX6 (standard playback Digital, (.smi), SubStation Alpha
.mp4, .asf, .wmv, only), DTS, MP3, (.ssa/.txt), MicroDVD (.sub/.
DLNA .m4v (DRM free), XVID, MPEG1 SS, H.264/ WMA, txt), SubViewer 1.0 (.sub),
.3gp, .mov, .mpe, MPEG-4 AVC, MPEG2 AAC, AC3 SubViewer 2.0 (.sub/.txt),
.m1v, .m2v, .flv, PS, MPEG2 TS, VC-1 SM TMPlayer (.txt), DVD Subtitle
.ts, .dat (WMV3) System (.txt)
Audio files
File File
Sampling Frequency Bitrate Note
Location Extension
mp3, .wma, within 32 - 48 kHz within 32 - 192 kbps Some wav files are 6
.wav, .m4a (WMA), within 16 - 48 (WMA), within 32 - 320 not supported on
Disc,
Appendix
(DRM free), kHz (MP3) kbps (MP3) this player.
USB
.flac, .ogg,
.aiff
mp3, .wma, within 32 - 48 kHz within 32 - 192 kbps Some wav files are
.wav, .m4a (WMA), within 16 - 48 (WMA), within 32 - 320 not supported on
DLNA
(DRM free), kHz (MP3) kbps (MP3) this player.
.flac, .ogg
Photo files
File File Recommended
Note
Location Extension Size
Disc, .jpg, .jpeg, Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
USB, .png, .gif, Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
DLNA .mpo, .jps are not supported.
56 Appendix
,,Note ,,Note
yy The file name is limited to 180 characters. yy A avi file which is encoded WMV 9 codec
yy Maximum files/Folder: Less than 2000 (total is not supported.
number of files and folders) yy This player supports UTF-8 files even it
yy Depending on the size and number of the contains Unicode subtitle content. This
files, it may take several minutes to read the player can not support the pure Unicode
content on the media. subtitle files.
yy File compatibility may differ depending on yy Depending on the types of file or ways of
the server. recording, it may not play back.
yy Because the compatibility on DLNA server yy A disc which was recorded by multi-session
are tested on the DLNA server (SmartShare on normal PC is not supported on this
PC Software) environment, file requirements player.
and playback functions may differ yy To be playback a video file, video file name
depending on media servers. and Subtitle file name must be the same.
yy The file requirements on page 55 are yy When you play a video file with a extension
not always compatible. There may have such as .ts, .m2ts, .mts, .tp, .Trp or .m2t,
some restrictions by file features and media your player may not support subtitle files.
servers ability.
yy The total playback time of audio file
yy Playing video subtitle files are only indicated on the screen may not correct for
available on DLNA media server created by VBR files.
SmartShare PC Software downloaded from
yy Video / Audio codec compatibility may
website. differ depending on video file.
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
AVCHD (Advanced Video
yy The total playback time of audio file
indicated on the screen may not correct for Codec High Definition)
VBR files. yy This player can playback AVCHD format discs.
yy HD video files contained on the CD/DVD or These discs are normally recorded and used in
USB 1.0/1.1 may not played properly. camcorders.
6 Blu-ray Disc or USB 2.0 are recommended to yy The AVCHD format is a high definition digital
play back HD video files. video camera format.
Appendix
yy This player supports H.264/MPEG-4 AVC yy The MPEG-4 AVC/H.264 format is capable of
profile Main, High at Level 4.1. A file with compressing images at higher efficiency than
higher level may not be supported. that of the conventional image compressing
yy This player does not support files that are format.
recorded with GMC*1 or Qpel*2. yy This player can playback AVCHD discs using
x.v.Color format.
*1 GMC Global Motion Compensation
*2 Qpel Quarter pixel yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy x.v.Color offers a wider color range than normal
DVD camcorder discs.
Appendix 57
Appendix
yy An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
yy Main, center, surround speakers and subwoofer
as necessary for chosen format.
58 Appendix
be included in the output bitstream if [Digital with High Speed HDMI Cable and Dolby Digital
Output] option is set to [Auto]. (Except LPCM Plus/Dolby TrueHD is outputted from HDMI OUT
Codec : the output always include interactive jack, DIGITAL AUDIO OUT jack is limited to PCM
and secondary audio.) 2ch (When the HDMI and DIGITAL AUDIO OUT
*2 This player automatically selects the HDMI audio are connected simultaneously).
according to the decoding capability of the
connected HDMI device even though [Digital
Output] option is set to [Auto].
*3 If the [Digital Output] option is set to [DTS re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[Auto]).
Appendix 59
Appendix
60 Appendix
Appendix
Danish 6865 Kazakh 7575 Russian 8285 Volapk 8679
Dutch 7876 Kirghiz 7589 Samoan 8377 Welsh 6789
English 6978 Korean 7579 Sanskrit 8365 Wolof 8779
Esperanto 6979 Kurdish 7585 Scots Gaelic 7168 Xhosa 8872
Estonian 6984 Laotian 7679 Serbian 8382 Yiddish 7473
Faroese 7079 Latin 7665 Serbo-Croatian 8372 Yoruba 8979
Fiji 7074 Latvian, Lettish 7686 Shona 8378 Zulu 9085
Finnish 7073 Lingala 7678
62 Appendix
Trademarks and
Licenses
DVD Logo is a trademark of DVD Format/Logo DLNA, the DLNA Logo and DLNA CERTIFIED are
Licensing Corporation. trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2013
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Appendix
64 Appendix
Specifications
General
Power requirements Refer to main label on the rear panel.
Power consumption 12 W
Dimensions (W x H x D) Approx. 360 mm x 41.5 mm x 200 mm
Net Weight (Approx.) 1.4 kg
Operating temperature 5 C - 35 C
Operating humidity 5 % - 90 %
Outputs
HDMI OUT (video/audio) 19 pin (Type A, HDMI Connector)
DIGITAL AUDIO OUT (COAXIAL) 0.5 V (p-p), 75 , RCA jack x 1
System
Laser Semiconductor laser
wavelength 405 nm / 650 nm
Signal system Standard PAL/NTSC color TV system
LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX
Bus Power Supply (USB) 5 V 0 500 mA
6
Appendix
Appendix 65
Appendix
service center.
66 Appendix
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(Content) and all services and offerings (Services)
provided or made available by or through any
third party (each a Service Provider) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Providers website for the most up-to-
date information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6 Please note that LGE is not responsible for any
Content or Services provided by the Service
Appendix