Professional Documents
Culture Documents
Series II
Hydraulic Excavator
Engine Drive
Engine Model Caterpillar 3196 ATAAC Maximum Travel Speed 4.1 kph 2.6 mph
Net Flywheel Power 302 kW 404 hp Maximum Drawbar Pull - 462 kN 103,820 lb
Weights Long Undercarriage
Operating Weight - 66 010 kg 145,530 lb
Long Undercarriage
Reach Boom, R3.6 (11'10") stick, 1885 mm (74") Extreme
Service Excavation Bucket, and 750 mm (30") shoes.
365B L Series II Hydraulic Excavator
High performance and rugged durability combine to maximize your productivity.
2
Hydraulics Engine Structures
Proven Proportional Priority Pressure The 365B L Series II has increased Caterpillar design and manufacturing
Compensated (PPPC) system with state- power and uses the Cat 3196 engine techniques assure outstanding durability
of-the-art electronic control. pg. 8 which complies with EPA Tier 2 and and service life from these important
other worldwide emission requirements. components. pg. 10
This engine is electronically controlled
for high efficiency. pg. 9
New Feature
3
Operator Station
Designed for comfort and ease of operation.
4
Operator Comfort. The work station is Electronic Control System. Caterpillar
designed to be quiet and comfortable designed electronic control system uses
for the operator, assuring high Vital Information Display System (VIDS)
productivity during a long work day. as the interface between the machine
Seat and console adjustments allow for and the operator or the service technician.
proper fitting to the operator. A positive VIDS includes an analog gauge section,
pressure, filtered, highly efficient a display screen and a keypad.
ventilation system is provided.
Automatic Climate Control. Automatic
Viewing Area. Excellent viewing area climate control is standard and maintains
through large, wide windows. A large constant temperature in the cab regardless
skylight provides upward visibility. of outside conditions.
Both lower and upper portions of the
Joystick Controls. Electronic joystick
front windshield can be easily stored in
controls have low lever effort and
an overhead position. A sliding window
eliminate pilot lines. Control pattern Engine Speed Dial. Engine speed dial
on the cab door allows convenient
can be changed electronically to suit has ten settings for simple, precise speed
communication between the operator
operator preference. The operator can setting. The selected engine speed setting
and nearby workers. Windshield wipers
choose a level of gain/response from shows on the VIDS display screen.
and washers are included as standard
quicker and more productive to slower
equipment to assure good visibility for Travel Controls. Electronic hand or
and more precise using a button on the
the operator in wet or dusty conditions. foot actuated travel controls allow the
console to optimize operation for
The standard sunshade can be used to operator to move the excavator while
different applications.
reduce the sunlight entering the skylight. operating the equipment. Hand levers
The cab has extra height and length for are easily removable.
increased operator space and is designed
to allow direct mounting of the optional Hydraulic Activation Control Lever.
Falling Objects Guard (FOGS) Hydraulic activation control lever
recommended for applications involving deactivates hydraulic functions and
overhead operation. It is mounted to the helps prevent operation when the
frame with viscous mounts for reduced operator exits the cab.
sound and vibration transmission. Seat. The fully adjustable Cat suspension
seat includes a wide range of comfort
features including fore/aft, height and
weight adjustments. Also included
are lumbar support, wide adjustable
armrests and a retractable seat belt.
5
Electronic Control System
Manages the engine and hydraulics for maximum performance.
System and Components. Both system Message Center Screen. The message
and components are Caterpillar center screen displays vital information
designed and built for perfect on machine conditions.
integration to optimize machine
Display shows graphic icons plus
performance.
written messages in operators
Joysticks. Electronic joysticks provide choice of 16 languages.
features not possible with hydraulic
Displayed information includes:
pilot valves:
- Warnings about machine
Eliminate pilot lines in cab for quieter
abnormalities.
operator environment.
- Machine operating conditions such
Simple pattern change through
as engine speed setting, auto engine
programming (consult your
speed mode selected, engine
Caterpillar dealer).
operation hours and time clock.
Operator selectable gain/response to
- Universal gauge depicts any of
suit application.
over 100 machine conditions such
- Quicker for more production. as temperatures, pressures and
voltages both as digital value
- Slower for more precision.
and as a bar graph.
- Three settings preset - 21 available.
- Service codes to allow the service
Vital Information Display System. VIDS technician to quickly diagnose and
is the link between the machine and the rectify problems.
operator or service technician.
Keypad. The keypad allows operator to
Analog Gauge. The analog gauge select machine operation conditions and
displays information requiring frequent to set view preferences.
checking:
Controllers. Electronic control system Fuel level.
utilizes three controllers connected by
Cat Data Link to manage the engine and Engine oil pressure.
hydraulics for maximum productivity Hydraulic oil temperature.
and efficiency:
Engine coolant temperature.
ADEM II (Advanced Diesel Engine
Module) controller for engine.
Pump-Valve Controller.
VIDS (Vital Information Display
System) controller.
6
Service and Maintenance
Simplified service and maintenance features save time and money.
7
Hydraulics
Caterpillar hydraulics deliver power and control to keep material moving at high volume.
8
Engine
Cat 3196 ATAAC engine is built for power, reliability, economy and low emissions.
9
Structures
The 365B L structural components are the backbone of the machines durability.
Advanced Carbody Design. The advanced Variable Gauge Undercarriage. The Outer frame utilizes curved side rails,
carbody design stands up to the toughest Variable Gauge (VG) undercarriage is which are die-formed, for excellent
applications. standard, providing a wide, stable base uniformity and strength throughout
for lifting or a narrow gauge for reduced the length.
Columnless design results in deeper
shipping width.
carbody for increased rigidity without Box section channels improve upper
added weight. Roller frames are attached with 36 frame rigidity under the cab.
large bolts to assure a rigid connection.
Modified X-shaped, box-section Boom tower and one piece main rails
carbody provides excellent resistance Track Roller Frames. Robot-welded are constructed of solid, high-tensile
to torsional bending. track roller frames use a fabricated strength steel plates.
U-section of thick steel plates for the
Upper structure weight and stresses New boom foot design transfers load
top portion with a flat bottom plate
are distributed evenly across the full more efficiently with less stress in
where the rollers mount for increased
length of the track roller frame. critical areas.
strength and stiffness.
Robot welding ensures consistent, Reinforced lift cylinder and swing
Main Frame. Rugged main frame is
high-quality welds throughout the drive mounts increase structure
designed for maximum durability and
manufacturing process. durability in rock and quarry
efficient use of materials.
applications.
Robot welding for consistent, high-
quality welds.
10
Undercarriage
Durable undercarriage absorbs stresses and provides excellent stability.
Undercarriage Components. Caterpillar Idler Guards. Standard idler guards Final Drives. Triple-reduction, planetary
designed and built undercarriage and center track guides maintain final drives are compact yet durable.
components are purposely oversized track alignment. Optional full length
Long (L) Undercarriage. Long
to offer heavy-duty performance and track guiding guards are available for
undercarriage is standard to maximize
durability. additional protection on steep side slopes.
stability and lifting capacity. Long,
Track Links. Strutted track links are Travel Motors. Smooth autoshifting wide and sturdy undercarriage offers
sealed for long life. Three choices of two-speed travel motors offer top travel a stable work platform.
shoe width are available to suit the speeds and plenty of pull on slopes or
Guards. Heavy guards protect the travel
application. All are heavy duty type turns. Counterbalance valves help
motors against damage. Hoses are routed
with 20.5 mm (0.81") thick webs. prevent overspeeding during downhill
inside the carbody to minimize exposure.
travel. Line relief valves are shockless
Sealed and Lubricated Rollers. Track
type for extra smooth stops.
rollers, carrier rollers and idlers are
sealed and lubricated for excellent
service life.
11
Booms, Sticks, and Attachments
The 365B L designed with the flexibility to help deliver higher production and efficiency.
Combinations. Select the right Castings and forgings are used at high Mass Excavator Boom. The Mass
combination for the job with your stress areas such as boom nose, boom Excavator Boom (M) 6.59 m (21'7")
Cat dealer to help ensure top production foot, boom cylinder and stick foot. maximizes productivity. The M Boom,
from the start. Choose from two booms used with either of two sticks, offers
Large, welded, box-section structures
and five sticks, plus a wide selection of significantly higher digging forces
with thick, multi-plate fabrications in
buckets and attachments. The 365B L and allows the use of larger buckets.
high-stress areas.
Series II offers a large combination of
Reach Sticks.
reach and digging forces for optimum Internal baffle plates are incorporated
versatility. to reduce stress and increase life. All reach sticks accept VB-family
buckets and bucket linkage.
Work Tools. Choose from a variety All booms and sticks are stress
of work tools such as hammers, relieved to maximize fatigue life and Three lengths available to suit a large
shears, rotators, grapples or crushers. durability, while minimizing weight range of applications.
Ask the Cat dealer for information on for improved performance.
Mass Sticks.
attachments or special configuration.
Reach Boom. The Reach Boom (R)
All mass excavation sticks accept
Booms and Sticks. Caterpillar 7.8 m (25'7") features an optimum
WB-family buckets and bucket linkage.
excavator booms and sticks are built design that maximizes digging
for performance and long service life. envelopes with three stick choices. Two lengths available.
12
Buckets
Extensive selection of buckets helps optimize machine performance.
13
Complete Customer Support
Cat dealer services help you operate longer with lower costs.
14
Engine Drive
Engine Model Caterpillar 3196 ATAAC Maximum Travel Speed 4.1 kph 2.6 mph
Net Flywheel Power 302 kW 404 hp Maximum Drawbar Pull - 462 kN 103,820 lb
ISO 9249 302 kW 404 hp Long Undercarriage
SAE J1349 302 kW 404 hp
EEC 80/1269 302 kW 404 hp
Bore 130 mm 5.12 in Hydraulic System
Stroke 150 mm 5.91 in
Main System - Maximum Flow 800 L/min 212 gal/min
Displacement 12 L 730 in3
(Total)
The 365B L Series II meets worldwide Tier 2 emission Swing System - Maximum Flow 357 L/min 94 gal/min
requirements. Maximum Pressure - Equipment - 32 000 kPa 4,640 psi
Net power advertised is the power available at the flywheel Normal
when the engine is equipped with fan, air cleaner, muffler Maximum Pressure - Equipment - 35 000 kPa 5,080 psi
and alternator. Heavy Lift
No engine power derating required below 2300 m (7500 ft) Maximum Pressure - Travel 35 000 kPa 5,080 psi
altitude. Maximum Pressure - Swing 28 000 kPa 4,060 psi
Pilot System - Maximum flow 90 L/min 24 gal/min
Pilot System- Maximum pressure 4120 kPa 600 psi
Weights Boom Cylinder - Bore 190 mm 7.5 in
Operating Weight - 66 010 kg 145,530 lb Boom Cylinder - Stroke 1792 mm 70.6 in
Long Undercarriage Stick Cylinder - Bore 200 mm 7.9 in
Stick Cylinder - Stroke 2118 mm 83.4 in
Reach Boom, R3.6 (11'10") stick, 1885 mm (74") Extreme
Service Excavation Bucket, and 750 mm (30") shoes. VB Family Bucket Cylinder - 180 mm 7.1 in
Bore
VB Family Bucket Cylinder - 1443 mm 56.8 in
Stroke
Track
WB Family Bucket Cylinder - 200 mm 7.9 in
Standard w/Long Undercarriage 750 mm 30 in Bore
Optional for Long 900 mm 36 in WB Family Bucket Cylinder - 1457 mm 57.4 in
Undercarriage Stroke
Optional for Long 650 mm 26 in
Undercarriage
Number of Shoes Each Side - 47 Service Refill Capacities
Long Undercarriage
Number of Track Rollers 8 Fuel Tank Capacity 800 L 211 gal
Each Side - Long Undercarriage Cooling System 95 L 25 gal
Number of Carrier Rollers 3 Engine Oil 54 L 14.3 gal
Each Side Swing Drive (each) 12 L 3.2 gal
Final Drive (each) 15 L 4 gal
Hydraulic System 670 L 177 gal
Swing Mechanism (including tank)
Hydraulic Tank 310 L 82 gal
Swing Speed 6.5 RPM
Swing Torque 204.5 kNm 150,850 lb-ft
A
I
F
D
G
E
H B
kg lb
Base machine with counterweight and 750 mm (30") shoes (without front linkage) 51 300 113,100
Counterweight 9740 21,450
Boom (includes lines, pins and stick cylinder)
Reach boom 7.8 m (25'7") 6260 13,800
Mass boom 6.59 m (21'7") 6390 14,090
Stick (includes lines, pins, bucket cylinder and linkage)
R4.67V (15'4") 3930 8,660
R3.6V (11'10") 3530 7,780
R2.84V (9'4") 3280 7,230
M3.0W (9'10") 4180 9,220
M2.57W (8'5") 3970 8,750
Feet Meters
40 12
11
35
10
30 9
8
25
7
20 6
5
15
4
C
10 3
2 D
5
1
0 0
B
1 2.84 m (9'4")
5
3.60 m (11'10")
2
4.67 m (15'4")
10 3 F
E
4
15 A
5
20 6
7
25
8
30 9
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 Meters
50 45 40 35 30 25 20 15 10 5 0 -5 Feet
Feet Meters
40 12
11
35
10
30 9
8
25
7
20 6
5
15
4
C
10 3
2 D
5
1
0 0
B
1
5
M2.57 m (8'5")
2
M3.0 m (9'10")
F
10 3
A E
4
15
5
20 6
7
25
8
30 9
13 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 Meters
45 40 35 30 25 20 15 10 5 0 -5 Feet
* Operating weight includes full fuel tank and 75 kg (165 lb) operator
Bucket Specifications
Contact your Caterpillar dealer for special bucket requirements.
Assumptions for maximum material density rating: s 2100 kg/m3 (3500 lb/yd3) max material density
1. Front linkage fully extended at ground line n 1800 kg/m3 (3000 lb/yd3) max material density
2. Bucket curled
3. 100% bucket fill factor
* Capacities are based on SAE J296. Some calculations of capacity fall on borderlines. Rounding
may allow two buckets to have the same English rating but different metric ratings.
BOOM Reach 7.8 m (25'7") BUCKET 2.5 m3 (3.25 yd3) HEAVY LIFT ON
STICK R4.67VB 4670 mm (15'4") SHOES 750 mm (30")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft 12.0 m/40.0 ft
ft
10.5 m kg *4700 *4700 11.38
35.0 ft lb *10,400 *10,400 36.89
9.0 m kg *7450 *7450 *4450 *4450 12.38
30.0 ft lb *16,400 *16,400 *9850 *9850 40.35
7.5 m kg *10 100 *10 100 *9050 8450 *4350 *4350 13.08
25.0 ft lb *22,050 *22,050 *19,050 17,950 *9600 *9600 42.77
6.0 m kg *11 400 11 300 *10 450 8250 *6300 6050 *4400 *4400 13.54
20.0 ft lb *24,750 24,200 *22,300 17,600 *13,900 13,300 *9600 *9600 44.35
4.5 m kg *17 750 *17 750 *14 500 *14 500 *12 500 10 800 *11 150 8000 *8250 5950 *4500 *4500 13.78
15.0 ft lb *39,050 *39,050 *31,350 *31,350 *27,050 23,150 *24,200 17,050 *15,850 12,550 *9900 *9900 45.20
3.0 m kg *21 000 20 250 *16 400 14 000 *13 650 10 250 *11 800 7650 9400 5750 *4750 4350 13.83
10.0 ft lb *45,250 43,600 *35,450 30,150 *29,550 21,900 *25,600 16,350 *18,900 12,250 *10,400 9600 45.37
1.5 m kg *23 600 18 750 *18 050 13 150 *14 700 9700 11 750 7350 9200 5600 *5100 4350 13.67
5.0 ft lb *50,950 40,300 *39,000 28,250 *31,750 20,750 25,150 15,650 19,700 11,900 *11,200 9600 44.87
Ground kg *13 300 *13 300 *25 050 17 750 *19 150 12 500 14 850 9250 11 450 7050 9050 5450 *5600 4550 13.32
Line lb *30,950 *30,950 *54,150 38,150 *41,350 26,800 31,850 19,850 24,550 15,100 *18,200 11,600 *12,350 10,000 43.69
1.5 m kg *8600 *8600 *17 250 *17 250 *25 300 17 250 *19 500 12 050 14 500 8950 11 250 6900 *6350 4950 12.74
5.0 ft lb *19,500 *19,500 *39,600 *39,600 *54,750 37,000 42,050 25,900 31,150 19,200 24,150 14,700 *14,000 10,900 41.75
3.0 m kg *14 200 *14 200 *23 450 *23 450 *24 450 17 100 *19 000 11 900 14 400 8850 11 200 6850 *7450 5700 11.90
10.0 ft lb *32,150 *32,150 *53,700 *53,700 *52,800 36,700 *41,050 25,550 30,900 19,000 24,100 14,650 *16,550 12,550 38.93
4.5 m kg *21 050 *21 050 *29 200 28 450 *22 350 17 250 *17 500 11 950 *13 750 8950 *8400 7000 10.73
15.0 ft lb *47,700 *47,700 *63,050 61,000 *48,200 37,050 *37,650 25,700 *29,350 19,200 *18,400 15,600 35.00
6.0 m kg *30 200 *30 200 *24 100 *24 100 *18 750 17 700 *14 500 12 300 *10 350 9300 *6350 *6350 9.09
20.0 ft lb *68,250 *68,250 *51,550 *51,550 *40,000 38,050 *30,650 26,500 *22,800 20,500 *14,350 *14,350 29.44
7.5 m kg *12 450 *12 450 *8700 *8700 7.30
25.0 ft lb *25,350 *25,350 *21,400 *21,400 22.13
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Reach 7.8 m (25'7") BUCKET 2.5 m3 (3.25 yd3) HEAVY LIFT OFF
STICK R4.67VB 4670 mm (15'4") SHOES 750 mm (30")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft 12.0 m/40.0 ft
ft
10.5 m kg *4050 *4050 11.38
35.0 ft lb *8950 *8950 36.89
9.0 m kg *6500 *6500 *3800 *3800 12.38
30.0 ft lb *14,350 *14,350 *8400 *8400 40.35
7.5 m kg *8950 *8950 *8000 *8000 *3700 *3700 13.08
25.0 ft lb *19,500 *19,500 *16,750 *16,750 *8200 *8200 42.77
6.0 m kg *9950 *9950 *9100 8250 *5500 *5500 *3750 *3750 13.54
20.0 ft lb *21,550 *21,550 *19,750 17,600 *12,050 *12,050 *8200 *8200 44.35
4.5 m kg *15 650 *15 650 *12 700 *12 700 *10 900 10 800 *9650 8000 *7250 5950 *3850 *3850 13.78
15.0 ft lb *34,500 *34,500 *27,450 *27,450 *23,550 23,150 *20,900 17,050 *13,850 12,550 *8450 *8450 45.20
3.0 m kg *18 550 *18 550 *14 400 14 000 *11 900 10 250 *10 250 7650 *8450 5750 *4050 *4050 13.83
10.0 ft lb *39,900 *39,900 *31,050 30,150 *25,700 21,900 *22,150 16,350 *16,600 12,250 *8900 *8900 45.37
1.5 m kg *20 800 18 750 *15 800 13 150 *12 800 9700 *10 750 7350 *9200 5600 *4400 4350 13.67
5.0 ft lb *44,850 40,300 *34,150 28,250 *27,650 20,750 *23,300 15,650 *17,800 11,900 *9650 9600 44.87
Ground kg *12 300 *12 300 *22 050 17 750 *16 750 12 500 *13 400 9250 *11 100 7050 *8850 5450 *4850 4550 13.32
Line lb *28,600 *28,600 *47,650 38,150 *36,200 26,800 *28,950 19,850 *23,950 15,100 *16,000 11,600 *10,700 10,000 43.69
1.5 m kg *7850 *7850 *16 000 *16 000 *22 250 17 250 *17 050 12 050 *13 600 8950 *11 050 6900 *5550 4950 12.74
5.0 ft lb *17,850 *17,850 *36,750 *36,750 *48,100 37,000 *36,850 25,900 *29,350 19,200 *23,800 14,700 *12,200 10,900 41.75
3.0 m kg *13 150 *13,150 *21 800 *21 800 *21 450 17 100 *16 600 11 900 *13 200 8850 *10 450 6850 *6550 5700 11.90
10.0 ft lb *29,700 *29,700 *49,950 *49,950 *46,300 36,700 *35,850 25,550 *28,350 19,000 *22,250 14,650 *14,550 12,550 38.93
4.5 m kg *19 550 *19 550 *25 600 *25 600 *19 550 17 250 *15 250 11 950 *11 900 8950 *7100 7000 10.73
15.0 ft lb *44,350 *44,350 *55,300 *55,300 *42,150 37,050 *32,750 25,700 *25,350 19,200 *15,500 *15,500 35.00
6.0 m kg *27 800 *27 800 *21 000 *21 000 *16 300 *16 300 *12 550 12 300 *8800 *8800 *5700 *5700 9.09
20.0 ft lb *59,450 *59,450 *44,900 *44,900 *34,700 *34,700 *26,400 *26,400 *19,400 *19,400 *12,250 *12,250 29.44
7.5 m kg *10 600 *10 600 *7300 *7300 7.30
25.0 ft lb *21,500 *21,500 *18,000 *18,000 22.13
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Reach 7.8 m (25'7") BUCKET 2.5 m3 (3.25 yd3) HEAVY LIFT ON
STICK R3.6VB 3600 mm (11'10") SHOES 750 mm (30")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft
ft
10.5 m kg *6600 *6600 10.02
35.0 ft lb *14,600 *14,600 32.36
9.0 m kg *11 300 *11 300 *6250 *6250 11.18
30.0 ft lb *23,100 *23,100 *13,850 *13,850 36.37
7.5 m kg *12 250 11 350 *6150 *6150 11.96
25.0 ft lb *26,700 24,200 *13,600 *13,600 39.08
6.0 m kg *14 650 *14 650 *12 950 11 000 *11 850 8050 *6250 5900 12.47
20.0 ft lb *31,750 *31,750 *28,100 23,600 *23,450 17,150 *13,700 13,000 40.83
4.5 m kg *20 500 *20 500 *16 350 14 550 *13 900 10 600 *12 250 7850 *6450 5450 12.74
15.0 ft lb *44,100 *44,100 *35,300 31,250 *30,050 22,650 26,300 16,800 *14,100 12,000 41.76
3.0 m kg *23 350 19 400 *18 000 13 650 *14 850 10 100 12 050 7600 *6750 5250 12.78
10.0 ft lb *50,300 41,850 *38,850 29,400 *32,100 21,650 25,750 16,250 *14,850 11,600 41.94
1.5 m kg *25 150 18 200 *19 250 12 950 15 250 9650 11 750 7350 *7300 5300 12.61
5.0 ft lb *54,300 39,200 *41,550 27,800 32,700 20,700 25,200 15,750 *16,050 11,650 41.39
Ground kg *12 000 *12 000 *25 650 17 600 *19 800 12 450 14 900 9300 11 550 7200 *8050 5550 12.21
Line lb *28,050 *28,050 *55,550 37,800 *42,850 26,750 31,950 20,000 24,800 15,400 *17,700 12,250 40.07
1.5 m kg *9800 *9800 *19 100 *19 100 *25 000 17 350 *19 600 12 200 14 700 9150 11 500 7150 *9150 6150 11.57
5.0 ft lb *22,250 *22,250 *43,950 *43,950 *54,150 37,300 *42,300 26,250 31,600 19,650 24,700 15,300 *20,250 13,600 37.91
3.0 m kg *18 100 *18 100 *28 650 *28 650 *23 250 17 450 *18 400 12 200 *14 600 9200 *9300 7250 10.62
10.0 ft lb *40,950 *40,950 *64,350 61,400 *50,300 37,500 *39,700 26,250 *31,250 19,750 *20,300 16,100 34.72
4.5 m kg *27 950 *27 950 *25 300 *25 300 *20 200 17 850 *15 900 12 500 *6650 *6650 9.26
15.0 ft lb *63,450 *63,450 *54,550 *54,550 *43,400 38,350 *33,950 26,850 *14,350 *14,350 30.12
6.0 m kg *18 650 *18 650 *14 950 *14 950 *10 650 *10 650 *10 550 *10 550 7.53
20.0 ft lb *39,550 *39,550 *31,400 *31,400 *23,450 *23,450 *22,900 *22,900 24.34
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Reach 7.8 m (25'7") BUCKET 2.5 m3 (3.25 yd3) HEAVY LIFT OFF
STICK R3.6VB 3600 mm (11'10") SHOES 750 mm (30")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft
ft
10.5 m kg *5800 *5800 10.02
35.0 ft lb *12,800 *12,800 32.36
9.0 m kg *10 100 *10 100 *5500 *5500 11.18
30.0 ft lb *20,700 *20,700 *12,100 *12,100 36.37
7.5 m kg *10 700 *10 700 *5400 *5400 11.96
25.0 ft lb *23,300 *23,300 *11,850 *11,850 39.08
6.0 m kg *12 900 *12 900 *11 300 11 000 *10 300 8050 *5450 *5450 12.47
20.0 ft lb *27,900 *27,900 *24,550 23,600 *20,850 17,150 *11,950 *11,950 40.83
4.5 m kg *18 100 *18 100 *14 400 *14 400 *12 150 10 600 *10 650 7850 *5650 5450 12.74
15.0 ft lb *38,950 *38,950 *31,000 *31,000 *26,250 22,650 *23,150 16,800 *12,350 12,000 41.76
3.0 m kg *20 600 19 400 *15 800 13 650 *12 950 10 100 *11 100 7600 *5950 5250 12.78
10.0 ft lb *44,350 41,850 *34,100 29,400 *28,050 21,650 *24,050 16,250 *13,050 11,600 41.94
1.5 m kg *22 200 18 200 *16 900 12 950 *13 650 9650 *11 400 7350 *6400 5300 12.61
5.0 ft lb *47,900 39,200 *36,500 27,800 *29,450 20,700 *24,650 15,750 *14,100 11,650 41.39
Ground kg *11 100 *11 100 *22 600 17 600 *17 400 12 450 *13 950 9300 *11 450 7200 *7100 5550 12.21
Line lb *25,950 *25,950 *48,900 37,800 *37,550 26,750 *30,100 20,000 *24,600 15,400 *15,650 12,250 40.07
1.5 m kg *9000 *9000 *17 750 *17 750 *22 000 17 350 *17 150 12 200 *13 700 9150 *10 900 7150 *8150 6150 11.57
5.0 ft lb *20,500 *20,500 *40,850 *40,850 *47,600 37,300 *37,050 26,250 *29,550 19,650 *23,200 15,300 *17,950 13,600 37.91
3.0 m kg *16 800 *16 800 *26 050 *26 050 *20 400 17 450 *16 100 12 200 *12 650 9200 *8350 7250 10.62
10.0 ft lb *38,050 *38,050 *56,550 *56,550 *44,100 37,500 *34,650 26,250 *27,100 19,750 *18,350 16,100 34.72
4.5 m kg *26 050 *26 050 *22 100 *22 100 *17 600 *17 600 *13 800 12 500 *6650 *6650 9.26
15.0 ft lb *59,150 *59,150 *47,650 *47,650 *37,850 *37,850 *29,500 26,850 *14,350 *14,350 30.12
6.0 m kg *16 150 *16 150 *12 900 *12 900 *9100 *9100 *8950 *8950 7.53
20.0 ft lb *34,150 *34,150 *27,050 *27,050 *20,000 *20,000 *19,450 *19,450 24.34
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Reach 7.8 m (25'7") BUCKET 2.9 m3 (3.75 yd3) HEAVY LIFT ON
STICK R2.84VB 2840 mm (9'4") SHOES 750 mm (30")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft
ft
10.5 m kg *7350 *7350 9.16
35.0 ft lb *16,350 *16,350 29.46
9.0 m kg *6900 *6900 10.43
30.0 ft lb *29,750 *29,750 *15,250 *15,250 33.90
7.5 m kg *14 400 *14 400 *13 100 10 850 *6750 *6750 11.29
25.0 ft lb *31,250 *31,250 *28,550 23,250 *14,850 *14,850 36.85
6.0 m kg *25 450 *25 450 *19 000 *19 000 *15 650 14 850 *13 650 10 650 *6750 6350 11.83
20.0 ft lb *56,050 *56,050 *40,900 *40,900 *33,900 31,950 *29,650 22,750 *14,850 14,000 38.72
4.5 m kg *21 950 20 200 *17 250 14 100 *14 500 10 250 12 000 7550 *6950 5850 12.11
15.0 ft lb *47,200 43,600 *37,200 30,300 *31,350 21,950 *23,300 16,050 *15,250 12,900 39.70
3.0 m kg *24 400 18 700 *18 650 13 300 *15 300 9800 11 800 7400 *7250 5650 12.16
10.0 ft lb *52,600 40,300 *40,300 28,600 *33,050 21,050 25,200 15,750 *15,950 12,450 39.89
1.5 m kg *25 550 17 750 *19 600 12 650 15 050 9450 11 600 7200 *7800 5750 11.97
5.0 ft lb *55,250 38,200 *42,350 27,200 32,250 20,300 24,850 15,400 *17,100 12,600 39.29
Ground kg *25 350 17 350 *19 800 12 300 14 750 9200 11 500 7100 *8550 6100 11.54
Line lb *54,950 37,300 42,550 26,400 31,700 19,750 25,300 15,650 *18,850 13,400 37.87
1.5 m kg *18 300 *18 300 *24 100 17 350 *19 100 12 200 14 700 9150 *9700 6900 10.84
5.0 ft lb *42,350 *42,350 *52,250 37,250 *41,300 26,150 31,550 19,600 *21,450 15,200 35.53
3.0 m kg *19 500 *19 500 *26 600 *26 600 *21 750 17 600 *17 400 12 300 *13 350 9300 *8250 *8250 9.80
10.0 ft lb *44,300 *44,300 *57,900 *57,900 *47,050 37,800 *37,400 26,450 *28,200 20,000 *17,900 *17,900 32.02
4.5 m kg *21 650 *21 650 *17 900 *17 900 *13 850 12 750 *7350 *7350 8.37
15.0 ft lb *46,700 *46,700 *38,350 *38,350 *29,200 27,450 *16,250 *16,250 27.30
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Reach 7.8 m (25'7") BUCKET 2.9 m3 (3.75 yd3) HEAVY LIFT OFF
STICK R2.84VB 2840 mm (9'4") SHOES 750 mm (30")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft 10.5 m/35.0 ft
ft
10.5 m kg *6500 *6500 9.16
35.0 ft lb *14,400 *14,400 29.46
9.0 m kg *6100 *6100 10.43
30.0 ft lb *26,150 *26,150 *13,450 *13,450 33.90
7.5 m kg *12 650 *12 650 *11 450 10 850 *5900 *5900 11.29
25.0 ft lb *27,450 *27,450 *24,950 23,250 *13,050 *13,050 36.85
6.0 m kg *22 650 *22 650 *16 800 *16 800 *13 800 *13 800 *11 950 10 650 *5950 *5950 11.83
20.0 ft lb *49,850 *49,850 *36,150 *36,150 *29,750 *29,750 *25,900 22,750 *13,050 *13,050 38.72
4.5 m kg *19 400 *19 400 *15 150 14 100 *12 650 10 250 *11 050 7550 *6100 5850 12.11
15.0 ft lb *41,700 *41,700 *32,650 30,300 *27,400 21,950 *20,700 16,050 *13,400 12,900 39.70
3.0 m kg *21 550 18 700 *16 400 13 300 *13 350 9800 *11 350 7400 *6400 5650 12.16
10.0 ft lb *46,350 40,300 *35,400 28,600 *28,900 21,050 *24,500 15,750 *14,050 12,450 39.89
1.5 m kg *22 500 17 750 *17 200 12 650 *13 850 9450 *11 450 7200 *6850 5750 11.97
5.0 ft lb *48,650 38,200 *37,150 27,200 *29,900 20,300 *24,650 15,400 *15,100 12,600 39.29
Ground kg *22 300 17 350 *17 350 12 300 *13 900 9200 *11 100 7100 *7550 6100 11.54
Line lb *48,300 37,300 *37,500 26,400 *29,950 19,750 *24,450 15,650 *16,650 13,400 37.87
1.5 m kg *17 000 *17 000 *21 150 17 350 *16 750 12 200 *13 300 9150 *8650 6900 10.84
5.0 ft lb *39,350 *39,350 *45,850 37,250 *36,150 26,150 *28,550 19,600 *19,050 15,200 35.53
3.0 m kg *18 150 *18 150 *23 300 *23 300 *19 050 17 600 *15 150 12 300 *11 550 9300 *8000 *8000 9.80
10.0 ft lb *41,200 *41,200 *50,650 *50,650 *41,150 37,800 *32,600 26,450 *24,400 20,000 *17,550 *17,550 32.02
4.5 m kg *18 800 *18 800 *15 550 *15 550 *12 000 *12 000 *6100 *6100 8.37
15.0 ft lb *40,550 *40,550 *33,300 *33,300 *25,150 *25,150 *13,500 *13,500 27.30
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Mass 6.59 m (21'7") BUCKET 3.5 m3 (4.6 yd3) HEAVY LIFT ON
STICK M3.0WB 3000 mm (9'10") SHOES 650 mm (26")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
ft
9.0 m kg *4550 *4550 9.05
30.0 ft lb *10,150 *10,150 29.28
7.5 m kg *13 000 *13 000 *4300 *4300 10.05
25.0 ft lb *27,300 *27,300 *9500 *9500 32.76
6.0 m kg *14 050 *14 050 *9950 9650 *4300 *4300 10.67
20.0 ft lb *30,550 30,300 *21,900 21,250 *9400 *9400 34.91
4.5 m kg *25 550 *25 550 *18 950 *18 950 *15 500 13 600 *13 500 9300 *4450 *4450 10.99
15.0 ft lb *54,650 *54,650 *40,800 *40,800 *33,550 29,100 *27,400 19,700 *9750 *9750 36.02
3.0 m kg *31 400 31 200 *21 900 19 150 *17 100 12 850 *14 250 8950 *4800 *4800 11.04
10.0 ft lb *67,350 67,150 *47,150 41,100 *36,950 27,550 *30,850 19,100 *10,500 *10,500 36.22
1.5 m kg *27 000 *27 000 *24 050 17 900 *18 350 12 200 14 250 8650 *5350 *5350 10.83
5.0 ft lb *64,650 62,100 *51,850 38,450 *39,700 26,150 30,450 18,400 *11,750 *11,750 35.54
Ground kg *30 250 28 050 *24 900 17 150 *18 950 11 750 14 000 8400 *6250 *6250 10.34
Line lb *70,450 60,150 *53,750 36,800 *40,850 25,150 29,950 17,950 *13,700 *13,700 33.93
1.5 m kg *20 450 *20 450 *32 850 28 050 *24 250 16 900 *18 400 11 550 *7650 *7650 9.53
5.0 ft lb *46,200 *46,200 *71,200 60,000 *52,400 36,250 *39,650 24,750 *16,900 *16,900 31.22
3.0 m kg *32 950 *32 950 *29 100 28 550 *21 800 17 100 *16 100 11 700 *8150 *8150 8.29
10.0 ft lb *74,700 *74,700 *62,900 61,150 *46,950 36,700 *34,150 25,150 *17,900 *17,900 27.06
4.5 m kg *29 400 *29 400 *22 450 *22 450 *16 350 *16 350 *13 150 *13 150 6.70
15.0 ft lb *62,900 *62,900 *47,900 *47,900 *34,250 *34,250 *28,800 *28,800 21.72
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Mass 6.59 m (21'7") BUCKET 3.5 m3 (4.6 yd3) HEAVY LIFT OFF
STICK M3.0WB 3000 mm (9'10") SHOES 650 mm (26")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
ft
9.0 m kg *3850 *3850 9.05
30.0 ft lb *8550 *8550 29.28
7.5 m kg *11 300 *11 300 *3600 *3600 10.05
25.0 ft lb *24,150 *24,150 *7950 *7950 32.76
6.0 m kg *12 250 *12 250 *8750 *8750 *3600 *3600 10.67
20.0 ft lb *26,550 *26,550 *19,200 *19,200 *7850 *7850 34.91
4.5 m kg *22 600 *22 600 *16 650 *16 650 *13 500 *13 500 *11 650 9300 *3700 *3700 10.99
15.0 ft lb *48,400 *48,400 *35,800 *35,800 *29,200 29,100 *24,250 19,700 *8150 *8150 36.02
3.0 m kg *27 750 *27 750 *19 200 19 150 *14 900 12 850 *12 300 8950 *4050 *4050 11.04
10.0 ft lb *59,500 *59,500 *41,400 41,100 *32,200 27,550 *26,650 19,100 *8850 *8850 36.22
1.5 m kg *25 050 *25 050 *21 100 17 900 *16 000 12 200 *12 850 8650 *4550 *4550 10.83
5.0 ft lb *60,050 *60,050 *45,500 38,450 *34,550 26,150 *27,700 18,400 *10,000 *10,000 35.54
Ground kg *28 100 28 050 *21 800 17 150 *16 500 11 750 *12 850 8400 *5350 *5350 10.34
Line lb *65,500 60,150 *47,150 36,800 *35,600 25,150 *27,600 17,950 *11,800 *11,800 33.93
1.5 m kg *18 900 *18 900 *28 900 28 050 *21 200 16 900 *16 000 11 550 *6650 *6650 9.53
5.0 ft lb *42,800 *42,800 *62,600 60,000 *45,850 36,250 *34,450 24,750 *14,700 *14,700 31.22
3.0 m kg *30 700 *30 700 *25 500 *25 500 *19 050 17 100 *13 900 11 700 *8150 *8150 8.29
10.0 ft lb *69,550 *69,550 *55,100 *55,100 *40,900 36,700 *29,450 25,150 *17,900 *17,900 27.06
4.5 m kg *25 550 *25 550 *19 500 *19 500 *14 100 *14 100 *11 250 *11 250 6.70
15.0 ft lb *54,650 *54,650 *41,550 *41,550 *29,450 *29,450 *24,550 *24,550 21.72
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Mass 6.59 m (21'7") BUCKET 3.5 m3 (4.6 yd3) HEAVY LIFT ON
STICK M2.57WB 2570 mm (8'5") SHOES 650 mm (26")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
ft
9.0 m kg *5650 *5650 8.54
30.0 ft lb *12,500 *12,500 27.60
7.5 m kg *13 900 *13 900 *5350 *5350 9.62
25.0 ft lb *28,700 *28,700 *11,750 *11,750 31.32
6.0 m kg *17 300 *17 300 *14 950 14 000 *5300 *5300 10.27
20.0 ft lb *37,400 *37,400 *32,500 29,900 *11,650 *11,650 33.58
4.5 m kg *27 500 *27 500 *20 050 *20 050 *16 300 13 450 *12 550 9200 *5500 *5500 10.60
15.0 ft lb *58,800 *58,800 *43,200 *43,200 *35,250 28,850 *23,150 19,600 *12,050 *12,050 34.74
3.0 m kg *22 750 18 900 *17 750 12 800 14 550 8950 *5850 *5850 10.65
10.0 ft lb *70,650 65,400 *49,100 40,650 *38,300 27,400 31,100 19,000 *12,900 *12,900 34.95
1.5 m kg *22 600 *22 600 *24 600 17 800 *18 800 12 200 14 250 8650 *6500 6500 10.43
5.0 ft lb *54,400 *54,400 *53,100 38,200 *40,600 26,150 30,500 18,450 *14,300 *14,300 34.24
Ground kg *29 750 28 000 *25 000 17 200 *19 100 11 800 *14 100 8500 *7500 7150 9.92
Line lb *69,400 60,000 *54,100 36,850 *41,200 25,300 *31,050 18,750 *16,550 15,750 32.54
1.5 m kg *22 000 *22 000 *31 850 28 250 *23 900 17 050 *18 150 11 700 *9150 8600 9.06
5.0 ft lb *49,800 *49,800 *69,100 60,450 *51,700 36,600 *39,050 25,150 *20,250 19,000 29.68
3.0 m kg *35 400 *35 400 *27 500 *27 500 *20 850 17 400 *14 800 12 050 *7900 *7900 7.76
10.0 ft lb *76,900 *76,900 *59,450 *59,450 *44,850 37,300 *32,550 26,500 *17,350 *17,350 25.30
4.5 m kg *19 800 *19 800 *13 700 *13 700 *13 100 *13 100 6.11
15.0 ft lb *41,950 *41,950 *30,200 *30,200 *28,500 *28,500 19.78
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
BOOM Mass 6.59 m (21'7") BUCKET 3.5 m3 (4.6 yd3) HEAVY LIFT OFF
STICK M2.57WB 2570 mm (8'5") SHOES 650 mm (26")
3.0 m/10.0 ft 4.5 m/15.0 ft 6.0 m/20.0 ft 7.5 m/25.0 ft 9.0 m/30.0 ft
ft
9.0 m kg *4850 *4850 8.54
30.0 ft lb *10,750 *10,750 27.60
7.5 m kg *12 150 *12 150 *4550 *4550 9.62
25.0 ft lb *25,500 *25,500 *10,050 *10,050 31.32
6.0 m kg *15 200 *15 200 *13 050 *13 050 *4500 *4500 10.27
20.0 ft lb *32,850 *32,850 *28,300 *28,300 *9950 *9950 33.58
4.5 m kg *24 350 *24 350 *17 650 *17 650 *14 200 13 450 *11 100 9200 *4700 *4700 10.60
15.0 ft lb *52,100 *52,100 *37,950 *37,950 *30,750 28,850 *20,400 19,600 *10,250 *10,250 34.74
3.0 m kg *20 000 18 900 *15 500 12 800 *12 750 8950 *5050 *5050 10.65
10.0 ft lb *62,400 *62,400 *43,100 40,650 *33,450 27,400 *27,600 19,000 *11,050 *11,050 34.95
1.5 m kg *20 950 *20 950 *21 600 17 800 *16 400 12 200 *13 100 8650 *5600 *5600 10.43
5.0 ft lb *50,450 *50,450 *46,600 38,200 *35,450 26,150 *28,200 18,450 *12,350 *12,350 34.24
Ground kg *27 700 *27 700 *21 950 17 200 *16 650 11 800 *12 600 8500 *6550 *6550 9.92
Line lb *64,550 60,000 *47,450 36,850 *35,900 25,300 *27,700 18,750 $14,400 *14,400 32.54
1.5 m kg *20 400 *20 400 *28 000 *28 000 *20 950 17 050 *15 800 11 700 *8050 *8050 9.06
5.0 ft lb *46,250 *46,250 *60,700 60,450 *45,250 36,600 *33,950 25,150 *17,800 *17,800 29.68
3.0 m kg *30 950 *30 950 *24 050 *24 050 *18 200 17 400 *12 750 12 050 *7900 *7900 7.76
10.0 ft lb *67,250 *67,250 *52,000 *52,000 *39,000 37,300 *28,050 26,500 *17,350 *17,350 25.30
4.5 m kg *17 100 *17 100 *11 700 *11 700 *11 150 *11 150 6.11
15.0 ft lb *36,200 *36,200 *25,800 * 25,800 *24,300 *24,300 19.78
* Indicates that the load is limited by hydraulic capacity rather than tipping capacity. Lift capacity ratings are based on SAE standard J1097.
Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity.
For more complete information on Cat products, dealer services, and industry solutions, visit us
on the web at www.CAT.com
2002 Caterpillar
Printed in U.S.A.
AEHQ5373-01 (9-02) Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment.
Asia Pacific (Replaces AEHQ5373) See your Caterpillar dealer for available options.