Professional Documents
Culture Documents
meetup|addtodel.icio.us|diggit 3fight1guy
Figure 1-3
I II I
I II I
=============*==@ II I
* I II I
* I II I
=============*==@ II I
I II I
^
|_ Jumper Wire
Usually one has to already be inside to get at the wires however ther are
a few tricks that burglars employ. Often a hole can be drilled into the
window and jumpering is done if the wires are visible. One way to make
the
wires visible is to unscrew the switch and give it a little pull. The wires
will probably be stapled and may be difcult to pull, but there is a
chance that the wires are just stuffed in between the studs. This is done
carfully so the switch is not removed too far from the magnet. Also if
possible the magnet may be unscrewed from the window itself and taped
to
the switch (It was done to a Radio Shack!). The door or window could
then
be freely opened.
THE RAVEN
+=======+
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-==--=-=-==-=-
=-=-=-=-=
Also look for my other text les on: Van Eck HAcking,Burglar Alarm
Bypass
part 2 & 3, Beyond Van Eck Phreaking and THE CIA SERIES FILES!
Tothebestofourknowledge,thetextonthispagemaybefreelyreproducedand
distributed.
Ifyouhaveanyquestionsaboutthis,pleasecheckoutourCopyrightPolicy.
totse.comcertificatesignatures
About|Advertise|BadIdeas|Community|ContactUs|CopyrightPolicy|Drugs|
Ego|Erotica
FAQ|Fringe|Linktototse.com|Search|Society|Submissions|Technology