The current waveform depicted here is characterized by
a period of 8 s. (a) What is the average value of the current over a single period? (b) If q(0) = 0, sketch q(t) for 0 < t < 20 s. Problem - 3
The current waveform depicted is characterized by a
period of 4 s. (a) What is the average value of the current over a single period? (b) Compute the average current over the interval 1 < t < 3 s. (c) If q(0) = 1 C, sketch q(t) for 0 < t < 4 s. Problem - 4
The current-voltage characteristic of a silicon solar cell
exposed to direct sunlight is given here. It is obtained by placing different-sized resistors across the two terminals of the device and measuring the resulting currents and voltages. (a) What is the value of the short-circuit current? (b) What is the value of the voltage at open circuit? (c) Estimate the maximum power that can be obtained from the device. Problem - 5
The circuit contains a dependent current source; the
magnitude and direction of the current it supplies are directly determined by the voltage labeled v 1. Determine the voltage v1 if v2 = 33*i2 and i2 = 100 mA. Problem - 6
Count the number of branches and nodes in the circuit.
If ix = 3 A and the 18 V source delivers 8 A of current, what is the value of RA? Problem - 7
For the circuit, determine (a) vR2 and (b) v2, if vR1 = 1 V. Problem - 8
Determine vx in the circuit
Problem - 9
For the single-node-pair circuit, find i A, iB , and iC.
Problem - 10
Determine the voltage v in the circuit.
Problem - 11
For the circuit, calculate the voltage v x.
Problem - 12
In the circuit, find i1, i2, and v3.
Problem - 13
Determine the value of vx as labeled in the circuit.
Problem - 14
For the given circuit (a) determine the power absorbed by
each resistor, (b) determine the power supplied by each current source. Problem - 15
The circuit is routinely employed to model the midfrequency
operation of a bipolar junction transistorbased amplifier. Calculate the amplifier output vout if the transconductance gm is equal to 322 mS. Problem - 16
With regard to the circuit, compute (a) the voltage across
the two 10 Ohm resistors; (b) the power dissipated by the 4 Ohm resistor. Problem - 17
In the given circuit, (a) calculate the current flowing through
each resistor and (b) determine the voltage across the current source Problem - 18
For the circuit, compute the voltage across each current
source. Problem - 19
For the circuit, determine the nodal voltage v 1 if A is (a) 2i1;