This document summarizes the design of a solid concrete slab according to BS 8110:2005. The slab has an interior span of 6.5 meters, a height of 1 meter, and a design moment of 216 kNm/m. The reinforcement is calculated to be H20 bars at 225 mm spacing, providing 1396 mm2/m of steel. All design checks are shown to meet the code requirements for reinforcement ratio, depth to reinforcement, tension reinforcement stress, and permissible span-to-depth ratio.
This document summarizes the design of a solid concrete slab according to BS 8110:2005. The slab has an interior span of 6.5 meters, a height of 1 meter, and a design moment of 216 kNm/m. The reinforcement is calculated to be H20 bars at 225 mm spacing, providing 1396 mm2/m of steel. All design checks are shown to meet the code requirements for reinforcement ratio, depth to reinforcement, tension reinforcement stress, and permissible span-to-depth ratio.
This document summarizes the design of a solid concrete slab according to BS 8110:2005. The slab has an interior span of 6.5 meters, a height of 1 meter, and a design moment of 216 kNm/m. The reinforcement is calculated to be H20 bars at 225 mm spacing, providing 1396 mm2/m of steel. All design checks are shown to meet the code requirements for reinforcement ratio, depth to reinforcement, tension reinforcement stress, and permissible span-to-depth ratio.
SOLID SLABS Originated from RCC11.xls v4.0 2006 - 2010 TCC
INPUT Location D&D: interior span solid slab
Design moment, M 216.0 kNm/m fcu 40 N/mm c 1.50 b 1.00 fy 500 N/mm s 1.15 span 6500 mm steel class A Height, h 1000 mm Section location CONTINUOUS SPAN Bar 20 mm Compression steel NONE cover 50 mm to these bars (deflection control only) ONE or TWO WAY SLAB OUTPUT D&D: interior span solid slab Compression steel = NONE d = 1000 - 50 - 20/2 = 940.0 mm . (3.4.4.4) K' = 0.156 > K = 0.006 ok . (3.4.4.4) z = 940.0 [0.5 + (0.25 - 0.006 /0.893)]^ = 933.6 > 0.95d = 893.0 mm (3.4.4.1) As = 216.00E6 /500 /893.0 x 1.15 = 556 < min As = 1300 mm/m PROVIDE H20 @ 225 = 1396 mm/m . (Eqn 8) fs = 2/3 x 500 x 556 /1396 /1.00 = 132.8 N/mm (Eqn 7) Tens mod factor = 0.55 + (477 - 132.8) /120 /(0.9 + 0.244) = 2.000 (3.4.6.3) Permissible L/d = 26.0 x 2.000 = 52.000 . Actual L/d = 6500 /940.0 = 6.915 ok . . .