You are on page 1of 1

Zipper

Friendship Bracelet Instructions

Level: Beginner
BEFORE YOU BEGIN your friendship bracelet pattern, know how to make the right hand double
knot, single left knot, and single right knot. You can see these instructions at myfbm.com.

1. Pick 3 different colors. You will use 2 strands of each 12. Take string #8 and make a right hand double knot with
color you choose. (This example uses 2 strands of red, 2 string #9. String #8 will now be in slot 9.
strands of white, and 2 strands of blue).
13. Youve now completed one rotation of the pattern.
2. Align strings, fold in half, and tie knot inch from fold Repeat steps 4-12 until your bracelet is long enough to
forming a loop. Attach your inch loop to MYFBM wear.
under the butterfly clip.
14. Once your bracelet is long enough to fit your wrist take
3. Separate strings by placing one string per slot. Note: strings from the slots 1, 2 & 3 in your left hand and
Use red in slots 1, 2, 3, 4, then white in 5, 6, 7, and the strings from slots 8, 9 & 10 in your right hand and
blue in 8, 9, 10. You will have one extra strand of white braid with the remaining 4 center strings.
and one extra strand of blue. Cut off these extra strands
near your starting knot. 15. Take the braided strand and tie two basic knots at the
end of your friendship bracelet.
4. Take string #1 and make a right hand double knot with
string #2. String #1 will now be in slot 2. 16. Unclip your friendship bracelet from the butterfly clip
and cut off the excess braided section. Your friendship
5. Take string #3 and make a right hand double knot with bracelet is ready to wear or share!
string #4. String #3 will now be in slot 4.
6. Take string #5 and make a right hand double knot with
string #6. String #5 will now be in slot 6.
7. Take string #8 and make a single left knot, and then a
single right with string #7. String #8 will stay in slot 8.
8. Take string #9 and make a right hand double knot with
string #10. String #9 will now be in slot 10.
9. Take string #2 and make a right hand double knot with
string #3. String #2 will now be in slot 3.
10. Take string #5 and make a single left knot, and then a
single right with string #4. String #5 will stay in slot 5.
11. Take string #6 and make a right hand double knot with
For more friendship
string #7. String #6 will now be in slot 7. bracelet pattern
instructions, visit

You might also like