Professional Documents
Culture Documents
The limit state of cracking for high bond adhesive like Hilti HIT-RE 500 should be checked for elevated
service temperatures.
Table 1: Hilti HIT-RE 500: bond stress limitation fbt,s for quasi-permanent loads and elevated
temperatures
Temperature T [mm]
50C / 122F 5.3 5.0 4.2 3.7 3.2 2.9 2.7 2.3
0.3
60C / 140F 4.3 4.1 3.3 2.9 2.5 2.2 2.1 1.7
T [C / F] service temperature in substrate at the position of the bonded bar
fb,s [N/mm2] bond stress under permanent loads
(load factor f = 1.0 for dead load and permanent part of variable actions)
wm [mm] Mean value of expected crack width for permanent loads
Notes:
Ultimate limit state (ULS) design is mandatory in all cases.
Be aware that the loads in SLS are 50% to 60% of ULS loads for normal cases.
The table is valid for concrete compressive strength fck 25 N/mm2
Scatter of crack width is considerable and larger cracks may occur.
Issue 09/2003
1/1