Professional Documents
Culture Documents
Standard gas seal offering on most Typically used with high pressure and
compressor models nitrogen applications
Used with atmospheric air and low Knife edges on pinion cut into the
pressure gases Babbitt material on the seal for a close
Allows for a small amount of gas fit with very low gas leakage
leakage from each compression stage Not sensitive to centering of the
A non-contacting
contacting component and is pinion shaft
not subject to shaft wear Ports can be machined in the seal to
Does not require periodic recover gas or buffer the seal during
maintenance machine downtime
Does not require inspection for 5+ Seal maintenance e is not required for
years under normal use 5+ years under normal use