1. Verify site Grounding test shelter, rack, antenna 2. check that the equimnet dose't damege 3. Verify that the shelter is well cooled B. BSS Configuration 1. Verify BSS SW version (1X/EVDO) 2. Verify ACM SW version 3. Verify BSS IP as designed 4. Verify BSS host names as designed 5. Verfiy BTS neighbor-list configuration as designed 6. Verify BSS performance jobs configuration (OMC/CEM SNMP target) C. BSS cabling 1. Verify console cables and connectivity (ACM-BTS; ACM-BSC; BSC-ACM) 2. Verify RF connector are properly connected (top of bay, duplexer) D. ANTENNA 1. Antenna Sweep test ANT DIST RETERN LOSS Main Alpha Div Alpha Main Beta Div Bets Provide results in a separate file Main Gamma Div Gamma 5. Verify GPS antenna installed (or PP1S connectivity) - min 4 satellite E. Alarm / Performance 1. Verify BSS alarms notifications at OMC/CEM (BSC/RNC/BTS/ACM/RFS) 2. Verify BSS performance at OMC/CEM (BSC/RNC/BTS/ACM/RFS) F. Single Cell Functionality Test Sector Alpha Sector Beta Sector Gamma 1. Antenna Azimuth 2. Antenna Tilt 3. TX power and spectrum measurements Provide results in a separate file 1XRTT channel 31 Sector Alpha Sector Beta Sector Gamma 4. Verify pilot offset (PN) 5. Registration (power up/down) 6. MM Call 7. ML Call 8. LM Call 9. Correct Mobile TOD display 10. Softer Handoff 11. Soft Handoff 12. 1X Connection (PPP) 13. 1X DATA (web/ftp) EVDO Channel 157 Sector Alpha Sector Beta Sector Gamma 14. Verify pilot offset (PN) 15. Correct Mobile TOD display 16. EVDO Connection (PPP) 17. Softer Handoff 18. Soft Handoff 19. EVDO DATA (web/ftp) 20. Average RTD (ping 500) 21. Active to dorment time