Lead Gage LG-5002
Thread Lead LG-5003
The lead gage inspects both internal and external thread leads using contact points that
seat in the threads of a part. Thread lead is the distance between threads, measured on a
plane parallel to the centerfine ofthe threaded part. The pitch of the thread determines the:
diameter of the contact points required for taking measurements.
The LG-5002 uses a two-point system to inspect thread lead for ACME, Stub ACME, UN,
or API threads. The two points allow for a sweeping action to obtain the measurement.
The LG-5003 uses the three-point system to inspect thread lead for ACME, Stub ACME,
UN threads, or API threads. Two fixed contact points atthe rear of the gage and one
with L805 moveable contact point athe fet of the gag provide complete stably when taking
sting standard thread lead measurements. Ths unique design does nol requre sweeping to cba
popheciey measurements, Pls, contact pins can be easly changed t allow the gage to De used
on a variety of thread forms,
ee ee
“as
Features
6-503, ‘+ Uses a three-point system for greater stability when inspecting parts (LG-5003)
+ Uses interchangeable contact points to allow inspection on a variety of thread forms,
+ Requires presetting using Gagemaker’s lead gage setting standards
LEAD GAGES
Gagemaker offers a variety f duratle lead gages, Standards and contact points are sold separately
‘Mode! Description Win. Bore Range
1LG-5002 | Lead Gage 2point, Contact Pt Spacing 500" | 1.200 | ¥#'- 4 Thread Length
Ls-s001 LG-5002-1 | Lead Gage 2-point. 0001" grad 1.200__| %#"- 4" Thread Length
1LG-5002-5_| Lead Gage 2-point, Contact Pt. Spacing 183° | _1.200_| 14-4 Thread Length
"5002.19 | bead Gage point, 000T grad, FES eiieeilea
1650021) | Contact Point Spacing .163 e200 | linwesd Lena
16-5003 _| Lead Gage point “1340 | 4 Tea Length
UG-5003-1 | Lead Gage point. 0007" grad 11340 | #'= 4 Tea Length
1LG-5005-J | Lead Gage Spoint, Contact Pt Spacing 1857 | 1.340 | 4-4 Tread Length
Tead Gage S-point_000T grad yea Thread Len
16-5008-1) | Contact Point Sgacing 189" 1340 | 4-4 Teed Length
TS-5O05-L_| Special Loadto-Load pitch ga0e 1500__ | Wr=# Tvead Length
UG-5003-S_| Special Stab-o-Sta pich goge 31500__| #°=4* Thread Lenath
Inspecting Thread Lead = Bich 2
L.G-5002 & LG-5003 Lead Gage Contact Points (Sold Individually)
HOW TO ORDER Two per LG-502 & tre pr LG 003. A cntact pts are manuactured om cafe
1. Select the LG-8002 or bbe id UN Series Threads
os
eens Model | Thread Pitch | Model | Thread Pitch
2. Select the proper contact TST Tp TSe25 Tp
points for the application, “Tosa 1 pic 1268. 2 pitch
based on the type of T66r 2 pitch Tie 3835 pitch
connection and pitch/TPI 197 25 pcr Tia 4 pitch
(old separately and Tierst 3 pitch Ti28 45 pitch
individually) Tiaat 35 pitch TH5 5 pich
3. Select the lead gage setting Tet etch Ts Spin
nda n the type E eo
standard, based on the typ oH att eet ford eae
of connection, taper and aoe a Te aoe
threads per inch (sold Toezr pier Toso | 415 8 12 pieh
separately) Toso 70 pitch Tost 14 8.16 pitch
oatt | 728 14 pich | Tose 18 pich
0x2 16 ich
GAGEMAKER — rene 631-231-1515 | Fax 631-251-1625 | wwwthreadcheck com | info@threadcheck.com | Authorized DealerLead Gage LG-5002
Thread Lead LG-5003
LG-5002 & LG-5003 Lead Gage Contact Points (Sold Individually)
‘These contact points inspect the thread lead of API thread forms, Sol individually, Two per LG-5002 & three per LG-5003,
‘Model _| _ Point Diameter Threads Per Inch Connection Type
235 0235" 3 Hughes Sim Line F-80
1200 0.200" 3 ‘All Hughes F-20
Tha 0.144" 4 ‘API Rotary Shouldered Connections
Tr28 0.128" a ‘API Rotary Shouldered Connections
THis Cr 3 ‘API Rolary Shouldered Connections
Ti0sT 0.105" 3 Truncated for Extreme Line
096. 0.006" 6 ‘API Rotary Shouldered Connections
"T030- 0.090" 3 Buitress Casing - Taper
Taz ‘oar a ‘API Rolary Shouldered Connections
052 0.082" 3 Buitress Casing - Lead
T057 0.057" 10 ‘API Tubing and Line Pipe
"T0507 0.050" av API Line Pipe
Toat ‘aoa 74 API Line Pipe
Tos2 ‘o0a2" 76 ‘APLLine Pipe
To2t ‘O02 Wr API Line Pipe
LEAD GAGE SETTING STANDARDS =, Ry
Gagemaker’s precision lead gage setting standards are manufactured in accordance with API Spec 68. Lead gage standards are used to preset the
lead gages contact point locaton prior tothe inspection of the threaded connector.
Model Connection TypelDescription TPF | TI] Gross Reference
TS-1007 | API@ Round Casing, Tubing & Dril Pipe, All 10-Round Tubing mw [set S597
S-1002 | Straight Threads, 6-18 Piicn, 4 Length Straight | 8 8 10 BOTS
S-1003 | 11%4""V"API Line Pie, American Sid, NET % TH ‘601-0
TS=1004 | Straight Threads, Line Pipe Straight | 1% S600F
TLS-1005_ | API Butress Casing, IntemalExternal 47-1397 3 B507-K
TS-1006 | API Butress Casing InemaVEvtemal 16° Larger r 3 SeOTKIS
(5 API Reg Bier, Da - 4H Hoghes Slim Hole
s-t007 | 4", 517,864" APIFullHole234"- 5" API INT Flush 2 4 S601.
204", 9%"- 5° Hughes Xtra Hole API Numbered Connectors #23-#60
TS-1008 | SH, THB APIReg "API Numbered Connectors 856-877 e a Eo
s-1009 | 24-4" API Reg ‘30, 490 API Full Hole z 5 ‘S6OT-N
"API Numbered Connesiors #10, #12, #73, #16, MT. (Macaron Tubing)
Ls-tote | 294° 347 PAC 1 4 5601-73
234° 4" American Open Hole
TSAO | 3%°- Gr Hughes FLO z os SESTPAA
Ls:1072 | 7 6" Hughes H-00 F 3% ‘607-PAB
(S013 | 29-38 Slim Line HO oF 3 ‘S61-PAC
ts-1027 5 7 3 :
s-1082 = 7 6 =
TS-5001_| Skaight Threads, 15 pitch # length : = STOS00T
TS-5002 | Staght Threads, 6-18 pitch, + length o STD5002
“TPF = Taper Per Foot, TP1= Threads Per inch
SPECIFICATIONS
Model Dimensions ‘Weights
uc-s002 SAKE XI (149.2 mm x50.8 mm x22.2 mm) 1.016 (45k9)
uc. 5003, TXEX2 (177.8 mm X08 mm X 60.8 mm) 1.01 (45kg)
Lead Standards TERE (1943 mm X 19.05 mm X 9.53 mm) (05. (22 ko)
GAGEMAKER —>rone 631-231-1515 | Fax 631-251-1625 | wwwthreadcheck com | info@threadcheck.com | Authorized Dealer