Professional Documents
Culture Documents
Table of Contents
1 General Information.................................................................................................1
1.1 Analysis Environment................................................................................1
1.2 Model Information.....................................................................................1
1.3 Project Comments:R123 T = 300K............................................................1
1.4 Size of Computational Domain..................................................................1
1.5 Simulation Parameters..............................................................................1
1.5.1 Mesh Settings.........................................................................................1
1.5.2 Material Settings....................................................................................2
1.5.3 Initial Conditions....................................................................................2
1.5.4 Boundary Conditions..............................................................................2
1.5.5 Volumetric Heat Sources........................................................................2
1.5.6 Engineering Goals..................................................................................2
1.6 Analysis Time............................................................................................2
2 Results...............................................................................................................2
2.1 Analysis Goals...........................................................................................2
2.2 Global Min-Max-Table...................................................................................2
2.3 Results......................................................................................................2
2.4 Conclusion.................................................................................................2
3 Appendix.............................................................................................................2
3.1 Material Data............................................................................................2
2
Fluid Flow Simulation Report
1 General Information
Objective of the simulation: Analizar el perfl de velocidades del fluido refrigerante R123 a lo largo de un tubo de
diametro 0.01m y una longitud de 1,5m.
Size
X min -0.002 m
X max 1.502 m
Y min -0.010 m
Y max 0.010 m
Z min -0.010 m
Z max 0.010 m
Material Settings
Fluids
R123
Initial Conditions
Thermodynamic parameters Static Pressure: 101325.00 Pa
Temperature: 300.00 K
Velocity parameters Velocity vector
Velocity in X direction: 0 m/s
Velocity in Y direction: 0 m/s
Velocity in Z direction: 0 m/s
Turbulence parameters
Boundary Conditions
Inlet Velocity 1
Type Inlet Velocity
Faces Face<1>@Saliente-Extruir1
Coordinate system Face Coordinate System
Reference axis X
Flow parameters Flow vectors direction: Normal to
face
Velocity normal to face: 0.068 m/s
Fully developed flow: No
Thermodynamic parameters Temperature: 300.00 K
Turbulence parameters Boundary layer parameters
Boundary layer type: Turbulent
Environment Pressure 1
Type Environment Pressure
Faces Face<2>@Saliente-Extruir1
Coordinate system Face Coordinate System
Reference axis X
Fluid Flow Simulation Report
Thermodynamic parameters Environment pressure: 101325.00 Pa
Temperature: 300.00 K
Turbulence parameters Boundary layer parameters
Boundary layer type: Turbulent
2 Results
2.1 Analysis Goals
Goals
Name Unit Value Progress Use in Delta Criteria
converge
nce
Min/Max Table
Name Minimum Maximum
Pressure [Pa] 101325.00 101335.22
Temperature [K] 300.00 300.00
Density (Fluid) 1456.69 1456.69
[kg/m^3]
Velocity [m/s] 0 0.085
Velocity (X) [m/s] 0 0.085
Velocity (Y) [m/s] -4.302e-004 4.300e-004
Velocity (Z) [m/s] -4.312e-004 4.287e-004
Temperature (Fluid) [K] 300.00 300.00
Vorticity [1/s] 6.31e-003 21.25
Velocity RRF [m/s] 0 0.085
Velocity RRF (X) [m/s] 0 0.085
Velocity RRF (Y) [m/s] -4.302e-004 4.300e-004
Velocity RRF (Z) [m/s] -4.312e-004 4.287e-004
Shear Stress [Pa] 0.02 0.09
Relative Pressure [Pa] -3.34e-005 10.22
Heat Transfer 0 0
Coefficient [W/m^2/K]
Surface Heat Flux 0 0
[W/m^2]
2.3 Results
Fluid Flow Simulation Report
0.08
Croquis3@Line1
Croquis3@Line2
0.07
Croquis3@Line3
Croquis3@Line4
0.06 Croquis3@Line5
Croquis3@Line6
0.05
Velocity (X) [m/s]
Croquis3@Line7
Croquis3@Line8
0.04 Croquis3@Line9
Croquis3@Line10
0.03 Croquis3@Line11
Croquis3@Line12
0.02 Croquis3@Line13
Croquis3@Line14
0.01 Croquis3@Line15
Croquis3@Line16
0
0 0.01 0.01 0.02 0.02 0.03
-0.01
Length [m]
2.4 Conclusion
Se logr obtener el perfil de velocidades a lo largo del tubo considerando como fluido el refrigerante del tipo R123 con
condiciones de frontera correspondientes a la temperature de 300K.
Fluid Flow Simulation Report
3 Appendix
3.1 Material Data
Engineering Database
Liquids
R123
Path: Liquids Pre-Defined
Density
Density[kg/m^3]
Temperature[K]
Dynamic viscosity
Dynamic viscosity[Pa*s]
Temperature[K]
Fluid Flow Simulation Report
Specific heat (Cp)
Specific heat (Cp)[J/(kg*K)]
Temperature[K]
Thermal conductivity
Thermal conductvity[W/(m*K)]
Temperature[K]
Cavitation effect: No