Professional Documents
Culture Documents
Data Sheet
Automotive on
PLUS+1
Features yy Complete propel drive system functionality 24 pins: (2) individually keyed Deutsch DTM 12
PLUS+1 Service Tool configurable for custom pin connectors
drive behavior 12 or 24 Vdc power supply, monitored internally
Independent pump/motor profiling & ramping Power supply for external sensors rated at
Multiple individually configurable propel drive 5 Vdc to 200 mA regulated internally
modes: 8 Inputs :
Automotive (command signal to pump engine 2 analog for drive & Inch Pedal
RPM dependent) 4 digital for FNR & Mode selection
Non-Automotive (command signal to pump by 2 frequency for Pump & Hydromotor speed
pedal or joystick) 8 Outputs :
Creep automotive (combination of both 2 PWM outputs (3A) for Pump displacement
above) control (NFPE & EDC)
Advanced functions, including: 1 PWM output (3A) for proportional or
Electronic drive and Inch function pressure controlled Hydromotors.
Engine antistall 1 digital output (3A) for Brake Pressure defeat
Constant speed drive control 4 digital outputs for Auxilliary functions like
Vehicle speed limiter brake light, Retarder etc.
Engine and motor overspeed protection See also related documents:
Engine speed dependent output (Retarder 70012797 Automotive on PLUS+1 User
Control) Manual
Option: J1939 CAN communication enabling 70012797 PLUS+1 Controller Family
component to component and service tool/ Technical Information
laptop communication via gateway
Technical Specifications
Electric parameters
Rated supply voltage 12V 9 to 16V
Rated supply voltage 24V 18 to 36V
Digital & PWM Outputs 3000 mA
Operating Temperature (ambient) -40C to 70C
IP rating with attached connectors IP67
EMI/RFI rating 100V/m
Vibration IEC 60068-2-64
Shock IEC 60068-2-27 test Ea