CENTRE “MET”
PORTABLE "i@
HARDNESS a
TESTERS |\oet
REFERENCE
TEST BLOCKS
CP HARDNESSPORTABLE ULTRASONIC HARDNESS TESTER MET-U1A / MET-U1A5\
PORTABLE COMBINED HARDNESS TESTER MET-UDA
DISTINCTIVE FEATURES DISTINCTIVE FEATURES
MET-U1A consist of an electronic module
and an UCI probe U1A with a load of 15 N;
NEW!
MET-U1A50 consist of an electronic module
and an UCI probe U1A50 with a load of 50 N,
Hardness testing’
.
~ articles of thickness starting from 1 mm;
“articles in hard-to-reach places;
+ without any visible indent on the surface;
= metal coatings; ; .
time of one measurement - 1,5 sec; Hardness testing:
Troughnoss of the tested surface for MET-U1A = the use of two changeable probes: ultrasonic and
hardness tester -2.5 Ra dynamic two hardness testers combined in one device;
roughness of the tested Surface for MET-U1A50 ~ articles of different weight, configuration, structure and
hardness tester - 3,2 Ra degree of mechanical and thermal treatment.
Implements ultrasonic contact impedance method (UCI). Implementation of both rebound and ultrasonic contact impedance (UCI) methods
PORTABLE DYNAMIC HARDNESS TESTER MET-D1A RANGE AND ERROR OF MEASUREMENTS
DISTINCTIVE FEATURES Hardness scale Measurement range Error, not more than] Reproducibility
Rockwell'C" scale (20-70) HRC TS HRG O5HRC
Rockwell” scale (41-99) HRB 2HRB 1.2 HRB
Brine scale (75-650) HB 70 HB 1%
Vickers scale (75-1000) HV 12 HV. 1%
Shore scale (28-102) HSD. 2HSO THSD
Tensile strength, Rm (78-1736) MPa 5%
ADVANTAGES OF PORTABLE HARDNESS TESTERS
- Exceptional accuracy of measurements provided by the transfer of Rockwell, Brinell, Vickers and Shore hardness
values from the primary hardness machine directly to portable hardness testers;
- Errorless scale conversion — hardness tester calibration is carried out using only hardness reference test blocks
without any conversion tables;
- The possibilty of independent hardness tester calibration;
- Aluminum body of the electronic module: hermetically sealed, dust- and waterproof (IP 66), thermo resistant;
~ Exclusive in-house software allowing to process measurement data transferred from hardness tester storage to
the computer via USB-connection:
+ Calibration is carried out by "VNIIFTRI’.
Hardness testing:
- articles weighting more than 3 kg:
- materials with non-homogenous, coarse
structure, forged and cast articles;
- does not depend on the probe special p»
high efficiency.
Implements a rebound methodMINIATURE ULTRASONIC HARDNESS TESTERS RANGE AND ERROR OF MEASUREMENTS
Hardness testername | Hardness scale | Measurement range | Error, not more than | Reproducibility
iniature Rockwell 'C’ hardness tester Miniature Rockwell 'B' hardness tester
MET-HRC /MET-HRC 50 | Rockwell C’ scale (20-70) HRC. 1,5 HRC 0,5 HRC
MET-HRB /MET-HRB 50 | Rockwell'B' scale (41-99) HRB 2HRB 4.2 HRB
MET-HB /MET-HB50 | Brinelle scale (75-650) HB 10 HB 1%
MET-HV/METHV50. | Vickers scale (75-1000) HV 12HV 1%
MET-HSD/MET-HSD50 | Shore scale (23-102) HSD 2HSD 1 HSD
TECHNICAL CHARACTERISTICS
aw 2 a it Mass 250
Indenter diamond Vickers pyramid
Time of one measurement 1 sec
Applied force 415 N/50N
Miniature Brinell hardness tester Miniature Vickers hardness tester Roughness of tested surface 2,5Ra/3,2Ra
Radius of curvature of tested not less than 5 mm
surfase
Width of tested sample not less than 1mm
Power supply 1chargeable AAA battery
Hardness tester resources 200000
(minimum number of testings)
ADVANTAGES OF MINIATURE HARDNESS TESTERS
- Hardness control of metal articles more than 1 mm thick;
- Easy, compact, comfortable to use. Hardness tester without electronic module, connection cable and keys;
- Exceptional accuracy of measurements provided by the transfer of hardness values from the primary hardness machine
directly to mini hardness testers through reference hardness test blocks;
Firm aluminum body, modem design and well-thought ergonomic characteristics;
Hardness control of metal articles of any weight and thickness starting from 1mm by ultrasonic contact ee ee ee tra nn Calbration via USB connection:
impedance method (UCI), ~ Gallbration is carried out by
The principle of operation is based on the determination of frequency of indenter free oscillation (acoustic
resonator with diamond Vickers pyramid) under the constant effort 15N / SON
MET-HB / MET-HB 50REFERENCE HARDNESS TEST BLOCKS REFERENCE HARDNESS TEST BLOCK:
WH) _ Rockwell test blocks ™
tarénessrnge | sonaniimiy | toast | Sze,
REBT a @
FRG wT 72 720
\ TRG a5s as 750 eont0s19 Shore test blocks
FRG rm 750
FRG 258 a4 750 Hess range | Nonuntirmty | S29, nm
OT
Superficial Rockwell test blocks 106027 a cons
190.957
Hiacressrnge | Nonanitomiy | Lo.tat | 26,0
Tae a =
TaN ae aa =
TaN 7 20 soaoao
HT a8 72 20
RT es 78 20
Her 4950 ss # Micro Vickers test blocks
trrnessrnge | Nonanfomty | toad iat | irynen
Ts THEO
=a wm TaoTmIs | as
3005 07
Brinellitestiblocks ADVANTAGES OF HARDNESS TEST BLOCKS
coe oars ime | aoe = Compliance wit intematonal standards ISO, ASTM, GOST;
sae zee “minimum dispersion in hardness readings along the surface;
= Long-term stability;
- Calibration is carried out by "VNIIFTRI"
Vickers test blocks
vrssscnae | nonentomy | towitot | Sen nm
nS AROS
= TATE mm | tonse.s0.20 | ooaoeo
ae | TH 2005
oar
Nina ican aE * vs.n2 | couono
HV 200850)CENTRE “MET”
DISTRIBUTORS
Phase II Plus
NORTH AND SOUTH AMERICA
Innovatest Europe BV
EUROPE
Phase II Measuring Instruments (Beijing)
CHINA
Fuji-Instruments
JAPAN
An-bomb Instruments
TAIWAN
Micron Metrology
INDIA
Halim Instrument Corp.
KOREA
Teskon Teknik Ekipmanlar
TURKEY
NTD Instruments
SINGAPORE, MALAYSIA, INDONESIA, THAILAND,
VIETNAM PHILIPPINES and BANGLADESH
+7(495) 229-75-26 www.met-hardness.ru info@met-hardness.ru