Professional Documents
Culture Documents
Page 1 of 4
New Rate New Rate
Sl. No. Name of Test Sl. No. Name of Test
(TK) (TK)
CEMENT CONCRETE SOIL
1 Concrete Cylinders (100x200mm) 2000 1 CBR of soils (Three points) 17000
2 Concrete Cylinders (150x300mm) 3000 2 Field Density per spot 6000*
3 Concrete Cylinders (casting & testing) 18000 3 Sp. Gr. 2000
4 Split Cylinder 3000
4 Hydrometer, sieve analysis & sp. Gr. 4500
5 Concrete beam in flexure 6500
6 Design of concrete mixes (ACI/BS) 55,000 5 Linear shrinkage 1800
7 Design of concrete mix using Admixture 60,000 6 Shrinkage limit 1500
8 Cubes (below 200mmx200mm) 3000 7 Liquid limit 3000
9 Cubes (200mmx200mm-300mmx300mm) 3500 8 Plastic limit 3000
10 Cubes (>300mmx300mm) 5500 9 Standard Proctor 7000
11 Core cutting & testing 6000* 10 Modified Proctor 8000
12 Core testing 3000 11 Unit weight (wet & dry) 2000
13 Rebound Impact hammer 5500* 12 Void ratio 3000
14 Ultrasonic Pulse Velocity (UPV) 5000* 13 Moisture content 1000
15 Half Cell Potential 5000* 14 Organic matter content 2700
15 Loss on ignition 2500
ROD 16 Alkalinity (CO3) 2000
1 Tension (Including Elongation) ( Upto 25 mm) 2200 17 SiO2 2000
2 Tension (Including Elongation) ( >25 mm) 3000 18 Sand equivalent test/Friction Angle 4000
3 Bend test (upto 25 mm) 1000 19 Permeability (Cohesive) 12000
4 Rebend test (upto 25 mm) 1400 20 Permeability (Non-cohesive sample) 5500
5 Bend test (above 25 mm) 1100
21 One dimensional consolidation 14000
6 Rebend test (above 25 mm) 1500
7 Elongation at Maxm Force 1500 Consolidated drained test (Direct Shear
22 Test)
7000
8 Shear Test 3500
9 Hardness (Rockwell) 2000 23 Consolidated drained triaxial Test 28000
10 Impact 3000 24 Percent compaction (Standard Proctor) 12000*
11 Stress-strain curves 7000 25 Percent compaction (Modified Proctor) 13000*
12 Spring test 2500 26 Consolidated quick test (Direct Shear Test) 5500
13 Tension (Weir) 2200 Con. Undrained triaxial test with pore
27 pressure
23000
14 Tension (Eye-hooks, anchor bolt) 4000
15 Angle/Flat Bar (700/-for Labour charge) 3000 Con.undrained triaxial test without pore
28 pressure
22000
16 Unit weight 1000
17 Actual Dia 1000 29 Unconfined compression 3500
18 Physical test 1000 30 Unconsolidated quick test (Direct Shear Test) 4500
19 Actual Dia 1000 31 Wash sieve analysis 2500
WATER WATER
1 Drinking water 7000 9 Nitrate-Nitrogen (NO3-N) 600
2 PH/Hydrogen ion Density 400 10 Total Alkalinity 500
3 Color (Filtered) 500 11 Total Hardness 800
4 Carbon dioxide (CO2) 300 12 Total Dissolved Solids (TDS) 900
5 Chloride (CI) 800 13 Arsenic (As) 190+10/- forchem.) 1500
6 Fluoride (F) 500 14 Turbidity 400
7 Iron (Fe) 1300 15 Salt Content 900
8 Manganese (Mn) 1500
Page 2 of 4
Sl. No. New Rate Sl. No. New Rate
Name of Test Name of Test
(TK) (TK)
AGRICULTURE USE ENVIRONMENTAL QUALITY OF SOIL
1 Boron (B) 1500 1 pH 500
2 Electrical conductivity (EC) 500 2 Boron (B) 2700
3 Magnesium Density (Mg) 3800 3 Electrical conductivity (EC) 800
4 Sodium (Na) Density (SAR) 3800 4 Organic Matter (Dry Combustion Method) 2400
9 Free Chlorine content, Cl2 600 5 Tanning: pH, Alkalinity, Colour, Turbidity, Hardness, Fe, Mn 4000
Cooling: pH, Hardness, Turbidity, Total Dissolved Solids, Fe, Mn,
10 Break Point Chlorination 7800 6 COD (KMnO4, PO4) 5000
Paper and Pulp (Ground wood): pH, Alkalinity, Colour, Turbidity,
11 Hydrogen Sulphide (H2S) 800 7 Hardness, Total Dissolved Solids, Chloride, Fe, Mn, SiO2, CO2 5000
Boller Feed Water: pH, Alkalinity, Colour, P-Alkalinity, M-
Alkalinity, Turbidity, Hardness, Total Dissolved Solids, total
12 Iodine content (I) 600 8 Suspended Solids. Dissolved Oxygen, Oil & Grease Contents, Fe, Mn, 6000
SiO2, PO2
Page 3 of 4
New Rate New Rate
Sl. No. Name of Test Sl. No. Name of Test
(TK) (TK)
Page 4 of 4