Professional Documents
Culture Documents
• LINKLB-500 / 1000
• LINKLB-1500E
• LINKLB-2000
• LINKLB-2500E
• LINKLB-3000
• LINKLB-4000E
This hotfix is specifically designed to modify any EOSv2 images between 3.1.64 and 3.2.2(13) in order to upgrade to EOSv2
3.2.2(14) and above.
To resolve this issue, apply this hotfix using the “eosupdate” utility in the Link LB. After you apply this hotfix it is imperative that you
DO NOT REBOOT the Link LB prior to upgrading to the target EOS.
Once this hotfix is installed you will be able to install the target EOSv2 files for versions 3.2.2 and above. This upgrade will need to be
followed by a reload of the Link LB as usual.
IMPORTANT WARNING: Before any firmware update, best practices recommend to ALWAYS do a
full backup of your configuration in a text file.
IMPORTANT: Release in EOSv2 format. Can only be installed from a 3.1.64 version or higher. If
you have a version older than 3.1.64, you must first upgrade to 3.1.64 before upgrading.
IMPORTANT: Kernel upgrade. Once updated, EOS firmware can not be downgraded to version
3.3.0.2 or before.
IMPORTANT: In a high availability implementation (two units in failover), both units must be
upgraded to version 3.4.x. FOVE module will not synchronize between versions 3.4 and 3.3.
LB-3000 specific lan failsafe support: EOS version 3.2.0 and higher supports lan failsafe for LB-
3000 on ports 5 and 6. To support this new feature on units shipped with a prior EOS version, the
end-user must activate the S1 switch (pushing backward) on the system board. Ensure usage of
antistatic equipment. Contact Elfiq support for authorization to open the casing and remove the
warranty void sticker.
HTTP
SYST
• DST support
HTTP
VFI
GENERAL
• Various fixes
January
3.4.0.11
26th 2010 SYST
• NTP support
VFI
HTTP
• Failover support
• SitePathMTPX support
GEOLINK
• Public/private keys support for Geolink users
VFI
HTTP
SYST
3.3.0.9
January • SNMP support correction for LB500/1000 models
27th 2009
VFI
SYST
November GENERAL
21th 2008
• New HTTP based interface for statistics and
SYST
VFI
• SIP protofix
FOVE
• Renegociation fix
GENERAL
SYST
th VFI
May 6
3.2.1.34
2008
• Traffic classification and prioritization for QoS rate
limiting and traffic shaping (Diffserv and rate
limiting)
SYST
• Support date and time in basic configurator
• Virtual management (vmgmt) support on all
devices
• Ram2net and net2ram support (SSH only)
• Support for lan failsafe (if supported by the Link
LB model)
VFI
GEOLINK
GENERAL
October 7th
3.2.0.0 • Support for E Series LB1500E and LB4000E
2007
• LB2000 support of two VFIs.
SYST
VFI
GEOLINK
3.1.70.20 th
May 28
2007 • Fixed geolink replication problem associated with
(RC3 to 3.2)
subnets
GENERAL
FOVE
GENERAL
BROKER
VFI
FOVE
GENERAL
VFI
FOVE
GEOLINK
December
3.1.66
4th 2006 • ISV synchronization through Geolink
General
General
• LB500 support
VFIx module
• IDNS_IN
• IDNS_OUT
VFIx module
June 27th
3.1.57
2006
• IDNS RR supports groups of geotags and a default
configuration if the GeoLink is down (Geotag group
All modules
VFIx module
SYST module
VFIx module
FOVE module
VFIx module
SYST module
FOVE module
BROKER module
General
VFIx module
February
3.1.22
8th 2006 • Enhanced TCP polling to support remote IP stacks
sending back ACK packets out of sequence
VFIx module
VFIx module
• NAT optimization
General
VFIx module
November
3.1.9
10th 2005 • Automatic status change for geotag policy of incoming
traffic
IDNS RR (export)
General
SYST module
• UTC support
VFIx module
o GMAC PROBE
o GMAC WEIGHT
o GMAC TCPPROBE
FOVE module
o BGP router
May 10th
2.2.157 o Route IP selector
2005
o Feature route_pref_algo
o Feature route_pref_no_acct
2.0.0
December • First commercial release
2003