Professional Documents
Culture Documents
2.1. Open PuTTY Session and make SSH Connection to STP1 Soekarno and save it
E5IPSM IP Address
for STP1
2.2. Make Sure below options are checked
2.3. Check your setting as below
2.4. Check your setting as below
2.5. Check your setting as below
2.6. Add Source Port and destination and click add
2.7. Once you add you will see the setting as below
2.8. Check your setting as below
2.9. Check your setting as below
2.10. Click Session , Save it then open the connection
2.11. Just press enter
2.12. Cursor will comes down as seen in the picture
2.13. Open Procom then go to Data-Manual Connect Menu; enter the IP Address with port that you
have define in the connection
You are in the Eagle
3. Connection to other STPs:
To connect to other STPs choose another Source port, any port greater than 1024 can be used.
Repeat the steps from 2.1 to 2.13 with an E5IPSM IP address for a given STP