Professional Documents
Culture Documents
Supporting all common rail injectors testing including piezo type and
electromagnetic type.
Can test two same type common rail injectors together at a same time.
3. BST203-D can test two same type common rail injectors at a same time.
Such as, it can test two electromagnetic common rail injectors together or two piezo common rail
injectors together at a same time.
We can input customer's logo and contacting information in the software of SD card. Once
technologies of common rail injectors would develop, customers can update data by SD
card.And with new technology of BST203-D tester, if customers do not install SD card,
BST203-D tester can work normally too.
Customers can adjust frequency and width pulse based on the 4 testing models.
If customers need to set count, they can touch counter/time button again to set count, and then
touch + or - button to increase or decrease count of injection.
If customers do not need to set count and injection time, they can test injectors under limited
count.
3pin connector is used to connect with piezo injectors, 2pin connector is used to connect with
electromagnetic common rail injectors.
Please do not connect wrongly, otherwise it will damage electrical board of BST203-D tester.
9. Customers can adjust frequency or width pulse to test common rail injectors
Customers touch buton of CRI type to select model of injector, touch Channel button to select
one injector testing or two injectors testing, touch button of MODEL to select basic testing
model, touch button of COUNTER/TIME to set injection time or count, and then touch
START/STOP button to start to test injector, and select to increase or decrease frequency or
width pulse during testing.
14. BST203-D can start injection, test high pressure of injection of all kinds of injectors.
15. BST203-D can adjust driving signal of frequency or width pulse of injection conveniently,
has driving signal wave from that completely consistent of ECU. Product has passed
electromagnetic and piezoelectric compatibility test like high and low temperature, static shock,
probability of failure very low.
16. BST203-D has protection of short circuit, provide driving signal transfer line of all kinds of
injectors.
17. BST203-D has four indicator lights, two lights are for piezo, other two lights are for
electromagnetic injectors.
It is easy for customers to judge problem of injectors according to flash of indicator light.
20. We supply operation manual in English, Russian, Spanish, French or Portuguese and
operation video in CD with product.
21. Contents
One 220V standard power cable ( if customers need 110V/60Hz power, please note when you order)
Skype: jbtnancy